linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: "Huang, Ying" <ying.huang@intel.com>
To: Zi Yan <zi.yan@sent.com>
Cc: linux-mm@kvack.org,  linux-kernel@vger.kernel.org,
	 Zi Yan <ziy@nvidia.com>,
	 Andrew Morton <akpm@linux-foundation.org>,
	 "Matthew Wilcox (Oracle)" <willy@infradead.org>,
	 David Hildenbrand <david@redhat.com>,
	 Baolin Wang <baolin.wang@linux.alibaba.com>
Subject: Re: [PATCH v3 1/2] mm/migrate: correct nr_failed in migrate_pages_sync()
Date: Wed, 18 Oct 2023 09:27:41 +0800	[thread overview]
Message-ID: <878r8090tu.fsf@yhuang6-desk2.ccr.corp.intel.com> (raw)
In-Reply-To: <20231017163129.2025214-1-zi.yan@sent.com> (Zi Yan's message of "Tue, 17 Oct 2023 12:31:28 -0400")

Zi Yan <zi.yan@sent.com> writes:

> From: Zi Yan <ziy@nvidia.com>
>
> nr_failed was missing the large folio splits from migrate_pages_batch()
> and can cause a mismatch between migrate_pages() return value and the
> number of not migrated pages, i.e., when the return value of
> migrate_pages() is 0, there are still pages left in the from page list.
> It will happen when a non-PMD THP large folio fails to migrate due to
> -ENOMEM and is split successfully but not all the split pages are not
> migrated, migrate_pages_batch() would return non-zero, but
> astats.nr_thp_split = 0. nr_failed would be 0 and returned to the caller
> of migrate_pages(), but the not migrated pages are left in the from page
> list without being added back to LRU lists.
>
> Fix it by adding a new nr_split counter for large folio splits and adding
> it to nr_failed in migrate_page_sync() after migrate_pages_batch() is
> done.
>
> Fixes: 2ef7dbb26990 ("migrate_pages: try migrate in batch asynchronously firstly")
> Signed-off-by: Zi Yan <ziy@nvidia.com>
> Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
> Cc: David Hildenbrand <david@redhat.com>
> Cc: Huang Ying <ying.huang@intel.com>
> Cc: Matthew Wilcox <willy@infradead.org>

LGTM except a trivial issue below, not a big deal.  Thanks!

Reviewed-by: "Huang, Ying" <ying.huang@intel.com>

> ---
>  mm/migrate.c | 16 +++++++++++++---
>  1 file changed, 13 insertions(+), 3 deletions(-)
>
> diff --git a/mm/migrate.c b/mm/migrate.c
> index c602bf6dec97..fc2e70b17704 100644
> --- a/mm/migrate.c
> +++ b/mm/migrate.c
> @@ -1495,6 +1495,7 @@ struct migrate_pages_stats {
>  	int nr_thp_succeeded;	/* THP migrated successfully */
>  	int nr_thp_failed;	/* THP failed to be migrated */
>  	int nr_thp_split;	/* THP split before migrating */
> +	int nr_split;	/* Large folio (include THP) split before migrating */
>  };
>  
>  /*
> @@ -1614,6 +1615,7 @@ static int migrate_pages_batch(struct list_head *from,
>  	int nr_retry_pages = 0;
>  	int pass = 0;
>  	bool is_thp = false;
> +	bool is_large = false;
>  	struct folio *folio, *folio2, *dst = NULL, *dst2;
>  	int rc, rc_saved = 0, nr_pages;
>  	LIST_HEAD(unmap_folios);
> @@ -1629,7 +1631,8 @@ static int migrate_pages_batch(struct list_head *from,
>  		nr_retry_pages = 0;
>  
>  		list_for_each_entry_safe(folio, folio2, from, lru) {
> -			is_thp = folio_test_large(folio) && folio_test_pmd_mappable(folio);
> +			is_large = folio_test_large(folio);
> +			is_thp = is_large && folio_test_pmd_mappable(folio);
>  			nr_pages = folio_nr_pages(folio);
>  
>  			cond_resched();
> @@ -1649,6 +1652,7 @@ static int migrate_pages_batch(struct list_head *from,
>  				stats->nr_thp_failed++;
>  				if (!try_split_folio(folio, split_folios)) {
>  					stats->nr_thp_split++;
> +					stats->nr_split++;
>  					continue;
>  				}
>  				stats->nr_failed_pages += nr_pages;
> @@ -1677,11 +1681,12 @@ static int migrate_pages_batch(struct list_head *from,
>  				nr_failed++;
>  				stats->nr_thp_failed += is_thp;
>  				/* Large folio NUMA faulting doesn't split to retry. */
> -				if (folio_test_large(folio) && !nosplit) {
> +				if (is_large && !nosplit) {
>  					int ret = try_split_folio(folio, split_folios);
>  
>  					if (!ret) {
>  						stats->nr_thp_split += is_thp;
> +						stats->nr_split += is_large;

We have tested is_large above, so, "++" is enough here.  Not a big deal,
only change it if you think it's necessary.

>  						break;
>  					} else if (reason == MR_LONGTERM_PIN &&
>  						   ret == -EAGAIN) {
> @@ -1827,6 +1832,7 @@ static int migrate_pages_sync(struct list_head *from, new_folio_t get_new_folio,
>  	stats->nr_succeeded += astats.nr_succeeded;
>  	stats->nr_thp_succeeded += astats.nr_thp_succeeded;
>  	stats->nr_thp_split += astats.nr_thp_split;
> +	stats->nr_split += astats.nr_split;
>  	if (rc < 0) {
>  		stats->nr_failed_pages += astats.nr_failed_pages;
>  		stats->nr_thp_failed += astats.nr_thp_failed;
> @@ -1834,7 +1840,11 @@ static int migrate_pages_sync(struct list_head *from, new_folio_t get_new_folio,
>  		return rc;
>  	}
>  	stats->nr_thp_failed += astats.nr_thp_split;
> -	nr_failed += astats.nr_thp_split;
> +	/*
> +	 * Do not count rc, as pages will be retried below.
> +	 * Count nr_split only, since it includes nr_thp_split.
> +	 */
> +	nr_failed += astats.nr_split;
>  	/*
>  	 * Fall back to migrate all failed folios one by one synchronously. All
>  	 * failed folios except split THPs will be retried, so their failure

--
Best Regards,
Huang, Ying


  parent reply	other threads:[~2023-10-18  1:29 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-10-17 16:31 Zi Yan
2023-10-17 16:31 ` [PATCH v3 2/2] mm/migrate: add nr_split to trace_mm_migrate_pages stats Zi Yan
2023-10-18  1:31   ` Huang, Ying
2023-10-19 11:07   ` Baolin Wang
2023-10-18  1:27 ` Huang, Ying [this message]
2023-10-19 11:04 ` [PATCH v3 1/2] mm/migrate: correct nr_failed in migrate_pages_sync() Baolin Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=878r8090tu.fsf@yhuang6-desk2.ccr.corp.intel.com \
    --to=ying.huang@intel.com \
    --cc=akpm@linux-foundation.org \
    --cc=baolin.wang@linux.alibaba.com \
    --cc=david@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=willy@infradead.org \
    --cc=zi.yan@sent.com \
    --cc=ziy@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox