From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
To: "John Hubbard" <jhubbard@nvidia.com>,
"Jérôme Glisse" <jglisse@redhat.com>
Cc: akpm@linux-foundation.org, linux-kernel@vger.kernel.org,
linux-mm@kvack.org
Subject: Re: [HMM v13 00/18] HMM (Heterogeneous Memory Management) v13
Date: Sat, 19 Nov 2016 20:20:35 +0530 [thread overview]
Message-ID: <8760njmslg.fsf@linux.vnet.ibm.com> (raw)
In-Reply-To: <alpine.LNX.2.20.1611181638370.53648@blueforge.nvidia.com>
John Hubbard <jhubbard@nvidia.com> writes:
> On Fri, 18 Nov 2016, Jérôme Glisse wrote:
>
>> Cliff note: HMM offers 2 things (each standing on its own). First
>> it allows to use device memory transparently inside any process
>> without any modifications to process program code. Second it allows
>> to mirror process address space on a device.
>>
>> Change since v12 is the use of struct page for device memory even if
>> the device memory is not accessible by the CPU (because of limitation
>> impose by the bus between the CPU and the device).
>>
>> Using struct page means that their are minimal changes to core mm
>> code. HMM build on top of ZONE_DEVICE to provide struct page, it
>> adds new features to ZONE_DEVICE. The first 7 patches implement
>> those changes.
>>
>> Rest of patchset is divided into 3 features that can each be use
>> independently from one another. First is the process address space
>> mirroring (patch 9 to 13), this allow to snapshot CPU page table
>> and to keep the device page table synchronize with the CPU one.
>>
>> Second is a new memory migration helper which allow migration of
>> a range of virtual address of a process. This memory migration
>> also allow device to use their own DMA engine to perform the copy
>> between the source memory and destination memory. This can be
>> usefull even outside HMM context in many usecase.
>>
>> Third part of the patchset (patch 17-18) is a set of helper to
>> register a ZONE_DEVICE node and manage it. It is meant as a
>> convenient helper so that device drivers do not each have to
>> reimplement over and over the same boiler plate code.
>>
>>
>> I am hoping that this can now be consider for inclusion upstream.
>> Bottom line is that without HMM we can not support some of the new
>> hardware features on x86 PCIE. I do believe we need some solution
>> to support those features or we won't be able to use such hardware
>> in standard like C++17, OpenCL 3.0 and others.
>>
>> I have been working with NVidia to bring up this feature on their
>> Pascal GPU. There are real hardware that you can buy today that
>> could benefit from HMM. We also intend to leverage this inside the
>> open source nouveau driver.
>>
>
> Hi,
>
> We (NVIDIA engineering) have been working closely with Jerome on this for
> several years now, and I wanted to mention that NVIDIA is committed to
> using HMM. We've done initial testing of this patchset on Pascal GPUs (a
> bit more detail below) and it is looking good.
>
This can also be used on IBM platforms like Minsky (
http://www.tomshardware.com/news/ibm-power8-nvidia-tesla-p100-minsky,32661.html
)
There is also discussion around using this for device accelerated page
migration. That can help with coherent device memory node work.
(https://lkml.kernel.org/r/1477283517-2504-1-git-send-email-khandual@linux.vnet.ibm.com)
-aneesh
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2016-11-19 14:50 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-18 18:18 Jérôme Glisse
2016-11-18 18:18 ` [HMM v13 01/18] mm/memory/hotplug: convert device parameter bool to set of flags Jérôme Glisse
2016-11-21 0:44 ` Balbir Singh
2016-11-21 4:53 ` Jerome Glisse
2016-11-21 6:57 ` Anshuman Khandual
2016-11-21 12:19 ` Jerome Glisse
2016-11-21 6:41 ` Anshuman Khandual
2016-11-21 12:27 ` Jerome Glisse
2016-11-22 5:35 ` Anshuman Khandual
2016-11-22 14:08 ` Jerome Glisse
2016-11-18 18:18 ` [HMM v13 02/18] mm/ZONE_DEVICE/unaddressable: add support for un-addressable device memory Jérôme Glisse
2016-11-21 8:06 ` Anshuman Khandual
2016-11-21 12:33 ` Jerome Glisse
2016-11-22 5:15 ` Anshuman Khandual
2016-11-18 18:18 ` [HMM v13 03/18] mm/ZONE_DEVICE/free_hot_cold_page: catch ZONE_DEVICE pages Jérôme Glisse
2016-11-21 8:18 ` Anshuman Khandual
2016-11-21 12:50 ` Jerome Glisse
2016-11-22 4:30 ` Anshuman Khandual
2016-11-18 18:18 ` [HMM v13 04/18] mm/ZONE_DEVICE/free-page: callback when page is freed Jérôme Glisse
2016-11-21 1:49 ` Balbir Singh
2016-11-21 4:57 ` Jerome Glisse
2016-11-21 8:26 ` Anshuman Khandual
2016-11-21 12:34 ` Jerome Glisse
2016-11-22 5:02 ` Anshuman Khandual
2016-11-18 18:18 ` [HMM v13 05/18] mm/ZONE_DEVICE/devmem_pages_remove: allow early removal of device memory Jérôme Glisse
2016-11-21 10:37 ` Anshuman Khandual
2016-11-21 12:39 ` Jerome Glisse
2016-11-22 4:54 ` Anshuman Khandual
2016-11-18 18:18 ` [HMM v13 06/18] mm/ZONE_DEVICE/unaddressable: add special swap for unaddressable Jérôme Glisse
2016-11-21 2:06 ` Balbir Singh
2016-11-21 5:05 ` Jerome Glisse
2016-11-22 2:19 ` Balbir Singh
2016-11-22 13:59 ` Jerome Glisse
2016-11-21 11:10 ` Anshuman Khandual
2016-11-21 10:58 ` Anshuman Khandual
2016-11-21 12:42 ` Jerome Glisse
2016-11-22 4:48 ` Anshuman Khandual
2016-11-24 13:56 ` Jerome Glisse
2016-11-18 18:18 ` [HMM v13 07/18] mm/ZONE_DEVICE/x86: add support for un-addressable device memory Jérôme Glisse
2016-11-21 2:08 ` Balbir Singh
2016-11-21 5:08 ` Jerome Glisse
2016-11-18 18:18 ` [HMM v13 08/18] mm/hmm: heterogeneous memory management (HMM for short) Jérôme Glisse
2016-11-21 2:29 ` Balbir Singh
2016-11-21 5:14 ` Jerome Glisse
2016-11-23 4:03 ` Anshuman Khandual
2016-11-27 13:10 ` Jerome Glisse
2016-11-28 2:58 ` Anshuman Khandual
2016-11-28 9:41 ` Jerome Glisse
2016-11-18 18:18 ` [HMM v13 09/18] mm/hmm/mirror: mirror process address space on device with HMM helpers Jérôme Glisse
2016-11-21 2:42 ` Balbir Singh
2016-11-21 5:18 ` Jerome Glisse
2016-11-18 18:18 ` [HMM v13 10/18] mm/hmm/mirror: add range lock helper, prevent CPU page table update for the range Jérôme Glisse
2016-11-18 18:18 ` [HMM v13 11/18] mm/hmm/mirror: add range monitor helper, to monitor CPU page table update Jérôme Glisse
2016-11-18 18:18 ` [HMM v13 12/18] mm/hmm/mirror: helper to snapshot CPU page table Jérôme Glisse
2016-11-18 18:18 ` [HMM v13 13/18] mm/hmm/mirror: device page fault handler Jérôme Glisse
2016-11-18 18:18 ` [HMM v13 14/18] mm/hmm/migrate: support un-addressable ZONE_DEVICE page in migration Jérôme Glisse
2016-11-18 18:18 ` [HMM v13 15/18] mm/hmm/migrate: add new boolean copy flag to migratepage() callback Jérôme Glisse
2016-11-18 18:18 ` [HMM v13 16/18] mm/hmm/migrate: new memory migration helper for use with device memory Jérôme Glisse
2016-11-18 19:57 ` Aneesh Kumar K.V
2016-11-18 20:15 ` Jerome Glisse
2016-11-19 14:32 ` Aneesh Kumar K.V
2016-11-19 17:17 ` Jerome Glisse
2016-11-20 18:21 ` Aneesh Kumar K.V
2016-11-20 20:06 ` Jerome Glisse
2016-11-21 3:30 ` Balbir Singh
2016-11-21 5:31 ` Jerome Glisse
2016-11-18 18:18 ` [HMM v13 17/18] mm/hmm/devmem: device driver helper to hotplug ZONE_DEVICE memory Jérôme Glisse
2016-11-18 18:18 ` [HMM v13 18/18] mm/hmm/devmem: dummy HMM device as an helper for " Jérôme Glisse
2016-11-19 0:41 ` [HMM v13 00/18] HMM (Heterogeneous Memory Management) v13 John Hubbard
2016-11-19 14:50 ` Aneesh Kumar K.V [this message]
2016-11-23 9:16 ` Haggai Eran
2016-11-25 16:16 ` Jerome Glisse
2016-11-27 13:27 ` Haggai Eran
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8760njmslg.fsf@linux.vnet.ibm.com \
--to=aneesh.kumar@linux.vnet.ibm.com \
--cc=akpm@linux-foundation.org \
--cc=jglisse@redhat.com \
--cc=jhubbard@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox