linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Tarun Sahu <tsahu@linux.ibm.com>
To: Mike Kravetz <mike.kravetz@oracle.com>
Cc: linux-mm@kvack.org, akpm@linux-foundation.org,
	muchun.song@linux.dev, aneesh.kumar@linux.ibm.com,
	willy@infradead.org, sidhartha.kumar@oracle.com,
	gerald.schaefer@linux.ibm.com, linux-kernel@vger.kernel.org,
	jaypatel@linux.ibm.com
Subject: Re: [PATCH v2] mm/folio: Avoid special handling for order value 0 in folio_set_order
Date: Thu, 08 Jun 2023 15:33:14 +0530	[thread overview]
Message-ID: <873532jmot.fsf@linux.ibm.com> (raw)
In-Reply-To: <20230606155853.GA4150@monkey>

Hi Mike,

Please find my comments inline.

Mike Kravetz <mike.kravetz@oracle.com> writes:

> On 06/06/23 10:32, Tarun Sahu wrote:
>>                                        
>> Hi Mike,              
>>     
>> Thanks for your inputs.                          
>> I wanted to know if you find it okay, Can I send it again adding your Reviewed-by?
>
> Hi Tarun,
>
> Just a few more comments/questions.
>
> On 05/15/23 22:38, Tarun Sahu wrote:
>> folio_set_order(folio, 0) is used in kernel at two places
>> __destroy_compound_gigantic_folio and __prep_compound_gigantic_folio.
>> Currently, It is called to clear out the folio->_folio_nr_pages and
>> folio->_folio_order.
>> 
>> For __destroy_compound_gigantic_folio:
>> In past, folio_set_order(folio, 0) was needed because page->mapping used
>> to overlap with _folio_nr_pages and _folio_order. So if these fields were
>> left uncleared during freeing gigantic hugepages, they were causing
>> "BUG: bad page state" due to non-zero page->mapping. Now, After
>> Commit a01f43901cfb ("hugetlb: be sure to free demoted CMA pages to
>> CMA") page->mapping has explicitly been cleared out for tail pages. Also,
>> _folio_order and _folio_nr_pages no longer overlaps with page->mapping.
>
> I believe the same logic/reasoning as above also applies to
> __prep_compound_gigantic_folio.
> Why?
> In __prep_compound_gigantic_folio we only call folio_set_order(folio, 0)
> in the case of error.  If __prep_compound_gigantic_folio fails, the caller
> will then call free_gigantic_folio() on the "gigantic page".  However, it is
> not really a gigantic  at this point in time, and we are simply calling
> cma_release() or free_contig_range().
> The end result is that I do not believe the existing call to
> folio_set_order(folio, 0) in __prep_compound_gigantic_folio is actually
> required.  ???
No, there is a difference. IIUC, __destroy_compound_gigantic_folio
explicitly reset page->mapping for each page of compound page which
makes sure, even if in future some fields of struct page/folio overlaps
with page->mapping, it won't cause `BUG: bad page state` error. But If we
just remove folio_set_order(folio, 0) from __prep_compound_gigantic_folio
without moving folio_set_order(folio, order), this will cause extra
maintenance overhead to track if page->_folio_order overlaps with
page->mapping everytime struct page fields are changed. As in case of
overlapping page->mapping will be non-zero. IMHO, To avoid it,
moving the folio_set_order(folio, order) after all error checks are
done on tail pages. So, _folio_order is either set on success and not
set in case of error. (which is the original proposal). But for
folio_set_head, I agree the way you suggested below.

WDYT?

>
> If my reasoning above is correct, then we could just have one patch to
> remove the folio_set_order(folio, 0) calls and remove special casing for
> order 0 in folio_set_order.
>
> However, I still believe your restructuring of __prep_compound_gigantic_folio,
> is of value.  I do not believe there is an issue as questioned by Matthew.  My
> reasoning has been stated previously.  We could make changes like the following
> to retain the same order of operations in __prep_compound_gigantic_folio and
> totally avoid Matthew's question.  Totally untested.
>
> diff --git a/mm/hugetlb.c b/mm/hugetlb.c
> index ea24718db4af..a54fee663cb1 100644
> --- a/mm/hugetlb.c
> +++ b/mm/hugetlb.c
> @@ -1950,10 +1950,8 @@ static bool __prep_compound_gigantic_folio(struct folio *folio,
>  	int nr_pages = 1 << order;
>  	struct page *p;
>  
> -	__folio_clear_reserved(folio);
> -	__folio_set_head(folio);
>  	/* we rely on prep_new_hugetlb_folio to set the destructor */
> -	folio_set_order(folio, order);
> +
>  	for (i = 0; i < nr_pages; i++) {
>  		p = folio_page(folio, i);
>  
> @@ -1969,7 +1967,7 @@ static bool __prep_compound_gigantic_folio(struct folio *folio,
>  		 * on the head page when they need know if put_page() is needed
>  		 * after get_user_pages().
>  		 */
> -		if (i != 0)	/* head page cleared above */
> +		if (i != 0)	/* head page cleared below */
>  			__ClearPageReserved(p);
>  		/*
>  		 * Subtle and very unlikely
> @@ -1996,8 +1994,14 @@ static bool __prep_compound_gigantic_folio(struct folio *folio,
>  		} else {
>  			VM_BUG_ON_PAGE(page_count(p), p);
>  		}
> -		if (i != 0)
> +
> +		if (i == 0) {
> +			__folio_clear_reserved(folio);
> +			__folio_set_head(folio);
> +			folio_set_order(folio, order);
With folio_set_head, I agree to this, But does not feel good with
folio_set_order as per my above reasoning. WDYT?

> +		} else {
>  			set_compound_head(p, &folio->page);
> +		}
>  	}
>  	atomic_set(&folio->_entire_mapcount, -1);
>  	atomic_set(&folio->_nr_pages_mapped, 0);
> @@ -2017,7 +2021,6 @@ static bool __prep_compound_gigantic_folio(struct folio *folio,
>  		p = folio_page(folio, j);
>  		__ClearPageReserved(p);
>  	}
> -	folio_set_order(folio, 0);
>  	__folio_clear_head(folio);
>  	return false;
>  }
>
>
>> 
>> struct page {
>> ...
>>    struct address_space * mapping;  /* 24     8 */
>> ...
>> }
>> 
>> struct folio {
>> ...
>>     union {
>>         struct {
>>         	long unsigned int _flags_1;      /* 64    8 */
>>         	long unsigned int _head_1;       /* 72    8 */
>>         	unsigned char _folio_dtor;       /* 80    1 */
>>         	unsigned char _folio_order;      /* 81    1 */
>> 
>>         	/* XXX 2 bytes hole, try to pack */
>> 
>>         	atomic_t   _entire_mapcount;     /* 84    4 */
>>         	atomic_t   _nr_pages_mapped;     /* 88    4 */
>>         	atomic_t   _pincount;            /* 92    4 */
>>         	unsigned int _folio_nr_pages;    /* 96    4 */
>>         };                                       /* 64   40 */
>>         struct page __page_1 __attribute__((__aligned__(8))); /* 64   64 */
>>     }
>> ...
>> }
>
> I do not think the copy of page/folio definitions adds much value to the
> commit message.
Yeah, Will remove it.
>
> -- 
> Mike Kravetz


  parent reply	other threads:[~2023-06-08 10:03 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-05-15 17:08 Tarun Sahu
2023-05-15 17:15 ` Tarun Sahu
2023-05-15 17:16 ` Matthew Wilcox
2023-05-15 17:45   ` Mike Kravetz
2023-05-16 13:09   ` Tarun Sahu
2023-05-22  5:49 ` Tarun Sahu
     [not found] ` <20230606155853.GA4150@monkey>
2023-06-08 10:03   ` Tarun Sahu [this message]
2023-06-08 23:52     ` Mike Kravetz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=873532jmot.fsf@linux.ibm.com \
    --to=tsahu@linux.ibm.com \
    --cc=akpm@linux-foundation.org \
    --cc=aneesh.kumar@linux.ibm.com \
    --cc=gerald.schaefer@linux.ibm.com \
    --cc=jaypatel@linux.ibm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mike.kravetz@oracle.com \
    --cc=muchun.song@linux.dev \
    --cc=sidhartha.kumar@oracle.com \
    --cc=willy@infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox