From: Alexander Hoogerhuis <alexh@ihatent.com>
To: Andrew Morton <akpm@digeo.com>
Cc: linux-kernel@vger.kernel.org, linux-mm@kvack.org
Subject: Re: 2.5.70-mm4
Date: 04 Jun 2003 19:14:42 +0200 [thread overview]
Message-ID: <871xy9hiil.fsf@lapper.ihatent.com> (raw)
In-Reply-To: <20030603231827.0e635332.akpm@digeo.com>
Andrew Morton <akpm@digeo.com> writes:
>
> . There have been one or two reports of -mm3 getting stuck in
> get_request_wait() against CDROMs. If anyone sees that, or was seeing it
> in -mm3 and does not see it in -mm4, please let us know.
>
One of those came from me. Its better than what I've had before. I've
tinkered a bit, with and without debugging and ide-scsi, and I still
managed to get it to blow up. But I no longer see the insane loads
I've had on earlier kernels.
Attached is the output from a sesison with copying from CDs to the USB
drive with no ide-scsi, and i've put a comment it where it seems to
fall over:
usb-storage: Command WRITE_10 (10 bytes)
usb-storage: 2a 00 1b c3 2f 4f 00 04 00 00
usb-storage: Bulk command S 0x43425355 T 0x9a7 Trg 0 LUN 0 L 524288 F 0 CL 10
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_sglist: xfer 524288 bytes, 128 entries
usb-storage: Status code 0; transferred 524288/524288
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x9a7 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command WRITE_10 (10 bytes)
usb-storage: 2a 00 1b c3 33 4f 00 04 00 00
usb-storage: Bulk command S 0x43425355 T 0x9a8 Trg 0 LUN 0 L 524288 F 0 CL 10
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_sglist: xfer 524288 bytes, 127 entries
usb-storage: Status code 0; transferred 524288/524288
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
-- here
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: usb_storage_command_abort called
usb-storage: usb_stor_stop_transport called
usb-storage: -- cancelling URB
usb-storage: Status code -104; transferred 0/13
usb-storage: -- transfer cancelled
usb-storage: Bulk status result = 3
usb-storage: -- command was aborted
usb-storage: Bulk reset requested
usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0
usb-storage: Soft reset: clearing bulk-in endpoint halt
usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=88 len=0
usb-storage: usb_stor_clear_halt: result = 0
usb-storage: Soft reset: clearing bulk-out endpoint halt
usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=02 len=0
usb-storage: usb_stor_clear_halt: result = 0
usb-storage: Soft reset done
usb-storage: scsi command aborted
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 00 00 00 00 00
usb-storage: Bulk command S 0x43425355 T 0x9a8 Trg 0 LUN 0 L 0 F 0 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x9a8 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
mvh,
A
--
Alexander Hoogerhuis | alexh@ihatent.com
CCNP - CCDP - MCNE - CCSE | +47 908 21 485
"You have zero privacy anyway. Get over it." --Scott McNealy
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"aart@kvack.org"> aart@kvack.org </a>
next prev parent reply other threads:[~2003-06-04 17:14 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-06-04 6:18 2.5.70-mm4 Andrew Morton
2003-06-04 8:12 ` 2.5.70-mm4 RAID1 seems to work! Helge Hafting
2003-06-04 13:55 ` 2.5.70-mm4 Paul Larson
2003-06-04 15:33 ` 2.5.70-mm4 Paul Larson
2003-06-04 15:52 ` 2.5.70-mm4 Paul Larson
2003-06-04 18:00 ` 2.5.70-mm4 Felipe Alfaro Solana
2003-06-04 17:14 ` Alexander Hoogerhuis [this message]
2003-06-04 21:12 ` 2.5.70-mm4 Helge Hafting
2003-06-05 1:53 ` 2.5.70-mm4 Neil Brown
2003-06-05 15:24 ` 2.5.70-mm4 this helped but still no raid0 Helge Hafting
2003-06-04 21:33 ` 2.5.70-mm4 Rudmer van Dijk
2003-06-05 9:21 ` 2.5.70-mm4 Maciej Soltysiak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=871xy9hiil.fsf@lapper.ihatent.com \
--to=alexh@ihatent.com \
--cc=akpm@digeo.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox