From: Christophe Leroy <christophe.leroy@csgroup.eu>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Paul Mackerras <paulus@samba.org>,
Michael Ellerman <mpe@ellerman.id.au>,
akpm@linux-foundation.org
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>,
linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
linux-mm@kvack.org, Nicholas Piggin <npiggin@gmail.com>
Subject: [PATCH v10 03/13] mm, hugetlbfs: Allow an arch to always use generic versions of get_unmapped_area functions
Date: Sat, 9 Apr 2022 19:17:27 +0200 [thread overview]
Message-ID: <77f9d3e592f1c8511df9381aa1c4e754651da4d1.1649523076.git.christophe.leroy@csgroup.eu> (raw)
In-Reply-To: <cover.1649523076.git.christophe.leroy@csgroup.eu>
Unlike most architectures, powerpc can only define at runtime
if it is going to use the generic arch_get_unmapped_area() or not.
Today, powerpc has a copy of the generic arch_get_unmapped_area()
because when selection HAVE_ARCH_UNMAPPED_AREA the generic
arch_get_unmapped_area() is not available.
Rename it generic_get_unmapped_area() and make it independent of
HAVE_ARCH_UNMAPPED_AREA.
Do the same for arch_get_unmapped_area_topdown() versus
HAVE_ARCH_UNMAPPED_AREA_TOPDOWN.
Do the same for hugetlb_get_unmapped_area() versus
HAVE_ARCH_HUGETLB_UNMAPPED_AREA.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
---
fs/hugetlbfs/inode.c | 17 +++++++++++++----
include/linux/hugetlb.h | 5 +++++
include/linux/sched/mm.h | 9 +++++++++
mm/mmap.c | 31 ++++++++++++++++++++++++-------
4 files changed, 51 insertions(+), 11 deletions(-)
diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index dd3a088db11d..ec611c7de9e3 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -195,7 +195,6 @@ static int hugetlbfs_file_mmap(struct file *file, struct vm_area_struct *vma)
* Called under mmap_write_lock(mm).
*/
-#ifndef HAVE_ARCH_HUGETLB_UNMAPPED_AREA
static unsigned long
hugetlb_get_unmapped_area_bottomup(struct file *file, unsigned long addr,
unsigned long len, unsigned long pgoff, unsigned long flags)
@@ -244,9 +243,10 @@ hugetlb_get_unmapped_area_topdown(struct file *file, unsigned long addr,
return addr;
}
-static unsigned long
-hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
- unsigned long len, unsigned long pgoff, unsigned long flags)
+unsigned long
+generic_hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
+ unsigned long len, unsigned long pgoff,
+ unsigned long flags)
{
struct mm_struct *mm = current->mm;
struct vm_area_struct *vma;
@@ -283,6 +283,15 @@ hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
return hugetlb_get_unmapped_area_bottomup(file, addr, len,
pgoff, flags);
}
+
+#ifndef HAVE_ARCH_HUGETLB_UNMAPPED_AREA
+static unsigned long
+hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
+ unsigned long len, unsigned long pgoff,
+ unsigned long flags)
+{
+ return generic_hugetlb_get_unmapped_area(file, addr, len, pgoff, flags);
+}
#endif
static size_t
diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index 53c1b6082a4c..10895adc7635 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -513,6 +513,11 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
unsigned long flags);
#endif /* HAVE_ARCH_HUGETLB_UNMAPPED_AREA */
+unsigned long
+generic_hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
+ unsigned long len, unsigned long pgoff,
+ unsigned long flags);
+
/*
* huegtlb page specific state flags. These flags are located in page.private
* of the hugetlb head page. Functions created via the below macros should be
diff --git a/include/linux/sched/mm.h b/include/linux/sched/mm.h
index 1ad1f4bfa025..da3a32d05b34 100644
--- a/include/linux/sched/mm.h
+++ b/include/linux/sched/mm.h
@@ -153,6 +153,15 @@ extern unsigned long
arch_get_unmapped_area_topdown(struct file *filp, unsigned long addr,
unsigned long len, unsigned long pgoff,
unsigned long flags);
+
+unsigned long
+generic_get_unmapped_area(struct file *filp, unsigned long addr,
+ unsigned long len, unsigned long pgoff,
+ unsigned long flags);
+unsigned long
+generic_get_unmapped_area_topdown(struct file *filp, unsigned long addr,
+ unsigned long len, unsigned long pgoff,
+ unsigned long flags);
#else
static inline void arch_pick_mmap_layout(struct mm_struct *mm,
struct rlimit *rlim_stack) {}
diff --git a/mm/mmap.c b/mm/mmap.c
index 313b57d55a63..d2b6c3fbfb8c 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -2128,10 +2128,10 @@ unsigned long vm_unmapped_area(struct vm_unmapped_area_info *info)
*
* This function "knows" that -ENOMEM has the bits set.
*/
-#ifndef HAVE_ARCH_UNMAPPED_AREA
unsigned long
-arch_get_unmapped_area(struct file *filp, unsigned long addr,
- unsigned long len, unsigned long pgoff, unsigned long flags)
+generic_get_unmapped_area(struct file *filp, unsigned long addr,
+ unsigned long len, unsigned long pgoff,
+ unsigned long flags)
{
struct mm_struct *mm = current->mm;
struct vm_area_struct *vma, *prev;
@@ -2161,17 +2161,25 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
info.align_offset = 0;
return vm_unmapped_area(&info);
}
+
+#ifndef HAVE_ARCH_UNMAPPED_AREA
+unsigned long
+arch_get_unmapped_area(struct file *filp, unsigned long addr,
+ unsigned long len, unsigned long pgoff,
+ unsigned long flags)
+{
+ return generic_get_unmapped_area(filp, addr, len, pgoff, flags);
+}
#endif
/*
* This mmap-allocator allocates new areas top-down from below the
* stack's low limit (the base):
*/
-#ifndef HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
unsigned long
-arch_get_unmapped_area_topdown(struct file *filp, unsigned long addr,
- unsigned long len, unsigned long pgoff,
- unsigned long flags)
+generic_get_unmapped_area_topdown(struct file *filp, unsigned long addr,
+ unsigned long len, unsigned long pgoff,
+ unsigned long flags)
{
struct vm_area_struct *vma, *prev;
struct mm_struct *mm = current->mm;
@@ -2219,6 +2227,15 @@ arch_get_unmapped_area_topdown(struct file *filp, unsigned long addr,
return addr;
}
+
+#ifndef HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
+unsigned long
+arch_get_unmapped_area_topdown(struct file *filp, unsigned long addr,
+ unsigned long len, unsigned long pgoff,
+ unsigned long flags)
+{
+ return generic_get_unmapped_area_topdown(filp, addr, len, pgoff, flags);
+}
#endif
unsigned long
--
2.35.1
next prev parent reply other threads:[~2022-04-09 17:18 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-09 17:17 [PATCH v10 00/13] Convert powerpc to default topdown mmap layout (v10) Christophe Leroy
2022-04-09 17:17 ` [PATCH v10 01/13] mm, hugetlbfs: Allow for "high" userspace addresses Christophe Leroy
2022-05-03 16:29 ` Christophe Leroy
2022-04-09 17:17 ` [PATCH v10 02/13] mm: Allow arch specific arch_randomize_brk() with CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT Christophe Leroy
2022-04-09 17:17 ` Christophe Leroy [this message]
2022-04-09 17:17 ` [PATCH v10 04/13] mm: Add len and flags parameters to arch_get_mmap_end() Christophe Leroy
2022-04-09 17:17 ` [PATCH v10 05/13] powerpc/mm: Move vma_mmu_pagesize() Christophe Leroy
2022-04-09 17:17 ` [PATCH v10 06/13] powerpc/mm: Make slice specific to book3s/64 Christophe Leroy
2022-04-09 17:17 ` [PATCH v10 07/13] powerpc/mm: Remove CONFIG_PPC_MM_SLICES Christophe Leroy
2022-04-09 17:17 ` [PATCH v10 08/13] powerpc/mm: Use generic_get_unmapped_area() and call it from arch_get_unmapped_area() Christophe Leroy
2022-04-09 17:17 ` [PATCH v10 09/13] powerpc/mm: Use generic_hugetlb_get_unmapped_area() Christophe Leroy
2022-04-09 17:17 ` [PATCH v10 10/13] powerpc/mm: Move get_unmapped_area functions to slice.c Christophe Leroy
2022-05-23 12:27 ` Laurent Dufour
2022-05-23 15:18 ` Christophe Leroy
2022-05-23 16:44 ` Laurent Dufour
2022-04-09 17:17 ` [PATCH v10 11/13] powerpc/mm: Enable full randomisation of memory mappings Christophe Leroy
2022-04-09 17:17 ` [PATCH v10 12/13] powerpc/mm: Convert to default topdown mmap layout Christophe Leroy
2022-04-09 17:17 ` [PATCH v10 13/13] powerpc: Simplify and move arch_randomize_brk() Christophe Leroy
2022-05-15 10:28 ` [PATCH v10 00/13] Convert powerpc to default topdown mmap layout (v10) Michael Ellerman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=77f9d3e592f1c8511df9381aa1c4e754651da4d1.1649523076.git.christophe.leroy@csgroup.eu \
--to=christophe.leroy@csgroup.eu \
--cc=akpm@linux-foundation.org \
--cc=benh@kernel.crashing.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=npiggin@gmail.com \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox