From: Mike Kravetz <mike.kravetz@oracle.com>
To: Michal Hocko <mhocko@kernel.org>,
Luiz Capitulino <lcapitulino@redhat.com>
Cc: linux-mm@kvack.org, LKML <linux-kernel@vger.kernel.org>
Subject: Re: gigantic hugepages vs. movable zones
Date: Fri, 28 Jul 2017 13:48:28 -0700 [thread overview]
Message-ID: <6dd3171d-7d61-5476-5465-ab7c06b56e0b@oracle.com> (raw)
In-Reply-To: <20170726105004.GI2981@dhcp22.suse.cz>
On 07/26/2017 03:50 AM, Michal Hocko wrote:
> Hi,
> I've just noticed that alloc_gigantic_page ignores movability of the
> gigantic page and it uses any existing zone. Considering that
> hugepage_migration_supported only supports 2MB and pgd level hugepages
> then 1GB pages are not migratable and as such allocating them from a
> movable zone will break the basic expectation of this zone. Standard
> hugetlb allocations try to avoid that by using htlb_alloc_mask and I
> believe we should do the same for gigantic pages as well.
>
> I suspect this behavior is not intentional. What do you think about the
> following untested patch?
> ---
> From 542d32c1eca7dcf38afca1a91bca4a472f6e8651 Mon Sep 17 00:00:00 2001
> From: Michal Hocko <mhocko@suse.com>
> Date: Wed, 26 Jul 2017 12:43:43 +0200
> Subject: [PATCH] mm, hugetlb: do not allocate non-migrateable gigantic pages
> from movable zones
>
> alloc_gigantic_page doesn't consider movability of the gigantic hugetlb
> when scanning eligible ranges for the allocation. As 1GB hugetlb pages
> are not movable currently this can break the movable zone assumption
> that all allocations are migrateable and as such break memory hotplug.
>
> Reorganize the code and use the standard zonelist allocations scheme
> that we use for standard hugetbl pages. htlb_alloc_mask will ensure that
> only migratable hugetlb pages will ever see a movable zone.
>
> Fixes: 944d9fec8d7a ("hugetlb: add support for gigantic page allocation at runtime")
> Signed-off-by: Michal Hocko <mhocko@suse.com>
This seems reasonable to me, and I like the fact that the code is more
like the default huge page case. I don't see any issues with the code.
I did some simple smoke testing of allocating 1G pages with the new code
and ensuring they ended up as expected.
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
--
Mike Kravetz
> ---
> mm/hugetlb.c | 35 ++++++++++++++++++++---------------
> 1 file changed, 20 insertions(+), 15 deletions(-)
>
> diff --git a/mm/hugetlb.c b/mm/hugetlb.c
> index bc48ee783dd9..60530bb3d228 100644
> --- a/mm/hugetlb.c
> +++ b/mm/hugetlb.c
> @@ -1066,11 +1066,11 @@ static void free_gigantic_page(struct page *page, unsigned int order)
> }
>
> static int __alloc_gigantic_page(unsigned long start_pfn,
> - unsigned long nr_pages)
> + unsigned long nr_pages, gfp_t gfp_mask)
> {
> unsigned long end_pfn = start_pfn + nr_pages;
> return alloc_contig_range(start_pfn, end_pfn, MIGRATE_MOVABLE,
> - GFP_KERNEL);
> + gfp_mask);
> }
>
> static bool pfn_range_valid_gigantic(struct zone *z,
> @@ -1108,19 +1108,24 @@ static bool zone_spans_last_pfn(const struct zone *zone,
> return zone_spans_pfn(zone, last_pfn);
> }
>
> -static struct page *alloc_gigantic_page(int nid, unsigned int order)
> +static struct page *alloc_gigantic_page(int nid, struct hstate *h)
> {
> + unsigned int order = huge_page_order(h);
> unsigned long nr_pages = 1 << order;
> unsigned long ret, pfn, flags;
> - struct zone *z;
> + struct zonelist *zonelist;
> + struct zone *zone;
> + struct zoneref *z;
> + gfp_t gfp_mask;
>
> - z = NODE_DATA(nid)->node_zones;
> - for (; z - NODE_DATA(nid)->node_zones < MAX_NR_ZONES; z++) {
> - spin_lock_irqsave(&z->lock, flags);
> + gfp_mask = htlb_alloc_mask(h) | __GFP_THISNODE;
> + zonelist = node_zonelist(nid, gfp_mask);
> + for_each_zone_zonelist_nodemask(zone, z, zonelist, gfp_zone(gfp_mask), NULL) {
> + spin_lock_irqsave(&zone->lock, flags);
>
> - pfn = ALIGN(z->zone_start_pfn, nr_pages);
> - while (zone_spans_last_pfn(z, pfn, nr_pages)) {
> - if (pfn_range_valid_gigantic(z, pfn, nr_pages)) {
> + pfn = ALIGN(zone->zone_start_pfn, nr_pages);
> + while (zone_spans_last_pfn(zone, pfn, nr_pages)) {
> + if (pfn_range_valid_gigantic(zone, pfn, nr_pages)) {
> /*
> * We release the zone lock here because
> * alloc_contig_range() will also lock the zone
> @@ -1128,16 +1133,16 @@ static struct page *alloc_gigantic_page(int nid, unsigned int order)
> * spinning on this lock, it may win the race
> * and cause alloc_contig_range() to fail...
> */
> - spin_unlock_irqrestore(&z->lock, flags);
> - ret = __alloc_gigantic_page(pfn, nr_pages);
> + spin_unlock_irqrestore(&zone->lock, flags);
> + ret = __alloc_gigantic_page(pfn, nr_pages, gfp_mask);
> if (!ret)
> return pfn_to_page(pfn);
> - spin_lock_irqsave(&z->lock, flags);
> + spin_lock_irqsave(&zone->lock, flags);
> }
> pfn += nr_pages;
> }
>
> - spin_unlock_irqrestore(&z->lock, flags);
> + spin_unlock_irqrestore(&zone->lock, flags);
> }
>
> return NULL;
> @@ -1150,7 +1155,7 @@ static struct page *alloc_fresh_gigantic_page_node(struct hstate *h, int nid)
> {
> struct page *page;
>
> - page = alloc_gigantic_page(nid, huge_page_order(h));
> + page = alloc_gigantic_page(nid, h);
> if (page) {
> prep_compound_gigantic_page(page, huge_page_order(h));
> prep_new_huge_page(h, page, nid);
>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2017-07-28 20:48 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-26 10:50 Michal Hocko
2017-07-27 2:22 ` Aneesh Kumar K.V
2017-07-27 7:28 ` Michal Hocko
2017-07-27 8:00 ` Aneesh Kumar K.V
2017-07-27 8:12 ` Michal Hocko
2017-07-27 8:22 ` Michal Hocko
2017-07-27 11:56 ` Vlastimil Babka
2017-07-28 20:48 ` Mike Kravetz [this message]
2017-07-31 6:47 ` Michal Hocko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6dd3171d-7d61-5476-5465-ab7c06b56e0b@oracle.com \
--to=mike.kravetz@oracle.com \
--cc=lcapitulino@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mhocko@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox