From: "Lorenzo Stoakes (Oracle)" <ljs@kernel.org>
To: Chunyu Hu <chuhu@redhat.com>
Cc: akpm@linux-foundation.org, david@kernel.org, shuah@kernel.org,
linux-mm@kvack.org, linux-kselftest@vger.kernel.org,
linux-kernel@vger.kernel.org, lorenzo.stoakes@oracle.com,
Liam.Howlett@oracle.com, vbabka@suse.cz, rppt@kernel.org,
surenb@google.com, mhocko@suse.com, ziy@nvidia.com,
baolin.wang@linux.alibaba.com, npache@redhat.com,
ryan.roberts@arm.com, dev.jain@arm.com, baohua@kernel.org,
lance.yang@linux.dev, Li Wang <liwang@redhat.com>
Subject: Re: [RESEND PATCH 2/4] selftests/mm: soft-dirty: skip two tests when thp is not available
Date: Fri, 13 Mar 2026 17:37:57 +0000 [thread overview]
Message-ID: <60f5a518-1254-4bd7-8272-128fdd56d6ec@lucifer.local> (raw)
In-Reply-To: <20260312114027.634559-3-chuhu@redhat.com>
On Thu, Mar 12, 2026 at 07:40:25PM +0800, Chunyu Hu wrote:
> The test_hugepage test contain two sub tests. If just reporting one skip
> when thp not available, there will be error in the log because the test
> count don't match the test plan. Change to skip two tests by running the
> ksft_test_result_skip twice in this case.
>
> Without the fix (run test on thp disabled kernel):
> ./run_vmtests.sh -t soft_dirty
> # --------------------
> # running ./soft-dirty
> # --------------------
> # TAP version 13
> # 1..19
> # ok 1 Test test_simple
> # ok 2 Test test_vma_reuse dirty bit of allocated page
> # ok 3 Test test_vma_reuse dirty bit of reused address page
> # ok 4 # SKIP Transparent Hugepages not available
> # ok 5 Test test_mprotect-anon dirty bit of new written page
> # ok 6 Test test_mprotect-anon soft-dirty clear after clear_refs
> # ok 7 Test test_mprotect-anon soft-dirty clear after marking RO
> # ok 8 Test test_mprotect-anon soft-dirty clear after marking RW
> # ok 9 Test test_mprotect-anon soft-dirty after rewritten
> # ok 10 Test test_mprotect-file dirty bit of new written page
> # ok 11 Test test_mprotect-file soft-dirty clear after clear_refs
> # ok 12 Test test_mprotect-file soft-dirty clear after marking RO
> # ok 13 Test test_mprotect-file soft-dirty clear after marking RW
> # ok 14 Test test_mprotect-file soft-dirty after rewritten
> # ok 15 Test test_merge-anon soft-dirty after remap merge 1st pg
> # ok 16 Test test_merge-anon soft-dirty after remap merge 2nd pg
> # ok 17 Test test_merge-anon soft-dirty after mprotect merge 1st pg
> # ok 18 Test test_merge-anon soft-dirty after mprotect merge 2nd pg
> # # 1 skipped test(s) detected. Consider enabling relevant config options to improve coverage.
> # # Planned tests != run tests (19 != 18)
> # # Totals: pass:17 fail:0 xfail:0 xpass:0 skip:1 error:0
> # [FAIL]
> not ok 52 soft-dirty # exit=1
>
> With the fix (run test on thp disabled kernel):
> ./run_vmtests.sh -t soft_dirty
> # --------------------
> # running ./soft-dirty
> # TAP version 13
> # --------------------
> # running ./soft-dirty
> # --------------------
> # TAP version 13
> # 1..19
> # ok 1 Test test_simple
> # ok 2 Test test_vma_reuse dirty bit of allocated page
> # ok 3 Test test_vma_reuse dirty bit of reused address page
> # # Transparent Hugepages not available
> # ok 4 # SKIP Test test_hugepage huge page allocation
> # ok 5 # SKIP Test test_hugepage huge page dirty bit
> # ok 6 Test test_mprotect-anon dirty bit of new written page
> # ok 7 Test test_mprotect-anon soft-dirty clear after clear_refs
> # ok 8 Test test_mprotect-anon soft-dirty clear after marking RO
> # ok 9 Test test_mprotect-anon soft-dirty clear after marking RW
> # ok 10 Test test_mprotect-anon soft-dirty after rewritten
> # ok 11 Test test_mprotect-file dirty bit of new written page
> # ok 12 Test test_mprotect-file soft-dirty clear after clear_refs
> # ok 13 Test test_mprotect-file soft-dirty clear after marking RO
> # ok 14 Test test_mprotect-file soft-dirty clear after marking RW
> # ok 15 Test test_mprotect-file soft-dirty after rewritten
> # ok 16 Test test_merge-anon soft-dirty after remap merge 1st pg
> # ok 17 Test test_merge-anon soft-dirty after remap merge 2nd pg
> # ok 18 Test test_merge-anon soft-dirty after mprotect merge 1st pg
> # ok 19 Test test_merge-anon soft-dirty after mprotect merge 2nd pg
> # # 2 skipped test(s) detected. Consider enabling relevant config options to improve coverage.
> # # Totals: pass:17 fail:0 xfail:0 xpass:0 skip:2 error:0
> # [PASS]
> ok 1 soft-dirty
> hwpoison_inject
> # SUMMARY: PASS=1 SKIP=0 FAIL=0
> 1..1
> CC: Li Wang <liwang@redhat.com>
> Signed-off-by: Chunyu Hu <chuhu@redhat.com>
LGTM, so:
Reviewed-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
> ---
> tools/testing/selftests/mm/soft-dirty.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/tools/testing/selftests/mm/soft-dirty.c b/tools/testing/selftests/mm/soft-dirty.c
> index 59c0dbe99a9b..bcfcac99b436 100644
> --- a/tools/testing/selftests/mm/soft-dirty.c
> +++ b/tools/testing/selftests/mm/soft-dirty.c
> @@ -82,7 +82,9 @@ static void test_hugepage(int pagemap_fd, int pagesize)
> int i, ret;
>
> if (!thp_is_enabled()) {
> - ksft_test_result_skip("Transparent Hugepages not available\n");
> + ksft_print_msg("Transparent Hugepages not available\n");
> + ksft_test_result_skip("Test %s huge page allocation\n", __func__);
> + ksft_test_result_skip("Test %s huge page dirty bit\n", __func__);
> return;
> }
>
> --
> 2.53.0
>
next prev parent reply other threads:[~2026-03-13 17:38 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-12 11:40 [PATCH 0/4] selftests/mm: skip several " Chunyu Hu
2026-03-12 11:40 ` [RESEND PATCH 1/4] selftests/mm/guard-regions: skip collapse test when thp not enabled Chunyu Hu
2026-03-12 13:58 ` Zi Yan
2026-03-12 19:48 ` David Hildenbrand (Arm)
2026-03-13 15:35 ` Lorenzo Stoakes (Oracle)
2026-03-12 11:40 ` [RESEND PATCH 2/4] selftests/mm: soft-dirty: skip two tests when thp is not available Chunyu Hu
2026-03-12 14:00 ` Zi Yan
2026-03-12 19:43 ` David Hildenbrand (Arm)
2026-03-13 17:37 ` Lorenzo Stoakes (Oracle) [this message]
2026-03-12 11:40 ` [RESEND PATCH 3/4] selftests/mm: split_huge_page_test: skip the test " Chunyu Hu
2026-03-12 14:11 ` Zi Yan
2026-03-13 2:29 ` Chunyu Hu
2026-03-13 15:15 ` Mike Rapoport
2026-03-13 15:27 ` Zi Yan
2026-03-13 18:00 ` Lorenzo Stoakes (Oracle)
2026-03-16 3:51 ` Chunyu Hu
2026-03-16 3:46 ` Chunyu Hu
2026-03-12 19:44 ` David Hildenbrand (Arm)
2026-03-13 2:25 ` Chunyu Hu
2026-03-12 11:40 ` [RESEND PATCH 4/4] selftests/mm: transhuge_stress: skip the test when thp " Chunyu Hu
2026-03-12 14:11 ` Zi Yan
2026-03-12 19:46 ` David Hildenbrand (Arm)
2026-03-13 2:43 ` Chunyu Hu
2026-03-13 18:01 ` Lorenzo Stoakes (Oracle)
2026-03-12 14:03 ` [PATCH 0/4] selftests/mm: skip several tests when thp is " Mike Rapoport
2026-03-13 0:26 ` Chunyu Hu
2026-03-13 15:19 ` Mike Rapoport
2026-03-13 15:40 ` Lorenzo Stoakes (Oracle)
2026-03-14 0:22 ` Chunyu Hu
2026-03-14 0:27 ` Chunyu Hu
2026-03-12 19:39 ` David Hildenbrand (Arm)
2026-03-13 2:21 ` Chunyu Hu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=60f5a518-1254-4bd7-8272-128fdd56d6ec@lucifer.local \
--to=ljs@kernel.org \
--cc=Liam.Howlett@oracle.com \
--cc=akpm@linux-foundation.org \
--cc=baohua@kernel.org \
--cc=baolin.wang@linux.alibaba.com \
--cc=chuhu@redhat.com \
--cc=david@kernel.org \
--cc=dev.jain@arm.com \
--cc=lance.yang@linux.dev \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=liwang@redhat.com \
--cc=lorenzo.stoakes@oracle.com \
--cc=mhocko@suse.com \
--cc=npache@redhat.com \
--cc=rppt@kernel.org \
--cc=ryan.roberts@arm.com \
--cc=shuah@kernel.org \
--cc=surenb@google.com \
--cc=vbabka@suse.cz \
--cc=ziy@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox