Re: [PATCH 00/11] Introduce movablemem_map=acpi boot option.

[Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>]

Hi Tang,

The patch works well on my x86_64 box.
I confirmed that hotpluggable node is allocated as Movable Zone.
So feel free to add:

Tested by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>

Nitpick below.

2013/04/05 18:39, Tang Chen wrote:
> Before this patch-set, we introduced movablemem_map boot option which allowed
> users to specify physical address ranges to set memory as movable. This is not
> user friendly enough for normal users.
> 
> So now, we introduce just movablemem_map=acpi to allow users to enable/disable
> the kernel to use Hot Pluggable bit in SRAT to determine which memory ranges are
> hotpluggable, and set them as ZONE_MOVABLE.
> 
> This patch-set is based on Yinghai's patch-set:
> v1: https://lkml.org/lkml/2013/3/7/642
> v2: https://lkml.org/lkml/2013/3/10/47
> 
> So it supports to allocate pagetable pages in local nodes.
> 
> We also split the large patch-set into smaller ones, and it seems easier to review.
> 
> 
> ========================================================================
> [What we are doing]
> This patchset introduces a boot option for users to specify ZONE_MOVABLE
> memory map for each node in the system. Users can use it in two ways:
> 
> 1. movablecore_map=acpi
>     In this way, the kernel will use Hot Pluggable bit in SRAT to determine
>     ZONE_MOVABLE for each node. All the ranges user has specified will be
>     ignored.
> 
> 
> [Why we do this]
> If we hot remove a memroy device, it cannot have kernel memory,
> because Linux cannot migrate kernel memory currently. Therefore,
> we have to guarantee that the hot removed memory has only movable
> memoroy.
> (Here is an exception: When we implement the node hotplug functionality,
> for those kernel memory whose life cycle is the same as the node, such as
> pagetables, vmemmap and so on, although the kernel cannot migrate them,
> we can still put them on local node because we can free them before we
> hot-remove the node. This is not completely implemented yet.)
> 
> Linux has two boot options, kernelcore= and movablecore=, for
> creating movable memory. These boot options can specify the amount
> of memory use as kernel or movable memory. Using them, we can
> create ZONE_MOVABLE which has only movable memory.
> (NOTE: doing this will cause NUMA performance because the kernel won't
>   be able to distribute kernel memory evenly to each node.)
> 
> But it does not fulfill a requirement of memory hot remove, because
> even if we specify the boot options, movable memory is distributed
> in each node evenly. So when we want to hot remove memory which
> memory range is 0x80000000-0c0000000, we have no way to specify
> the memory as movable memory.
> 
> Furthermore, even if we can use SRAT, users still need an interface
> to enable/disable this functionality if they don't want to lose their
> NUMA performance.  So I think, a user interface is always needed.
> 
> So we proposed this new feature which enable/disable the kernel to set
> hotpluggable memory as ZONE_MOVABLE.
> 
> 
> [Ways to do this]
> There may be 2 ways to specify movable memory.
> 1. use firmware information
> 2. use boot option
> 
> 1. use firmware information
>    According to ACPI spec 5.0, SRAT table has memory affinity structure
>    and the structure has Hot Pluggable Filed. See "5.2.16.2 Memory
>    Affinity Structure". If we use the information, we might be able to
>    specify movable memory by firmware. For example, if Hot Pluggable
>    Filed is enabled, Linux sets the memory as movable memory.
> 
> 2. use boot option
>    This is our proposal. New boot option can specify memory range to use
>    as movable memory.
> 
> 
> [How we do this]
> We now propose a boot option, but support the first way above. A boot option
> is always needed because set memory as movable will cause NUMA performance
> down. So at least, we need an interface to enable/disable it so that users
> who don't want to use memory hotplug functionality will also be happy.
> 
> 
> [How to use]
> Specify movablemem_map=acpi in kernel commandline:
>           *
>           * SRAT:                |_____| |_____| |_________| |_________| ......
>           * node id:                0       1         1           2
>           * hotpluggable:           n       y         y           n
>           * ZONE_MOVABLE:                |_____| |_________|
>           *
>     NOTE: 1) Before parsing SRAT, memblock has already reserve some memory ranges
>              for other purposes, such as for kernel image. We cannot prevent
>              kernel from using these memory, so we need to exclude these memory
>              even if it is hotpluggable.
>              Furthermore, to ensure the kernel has enough memory to boot, we make
>              all the memory on the node which the kernel resides in should be
>              un-hotpluggable.
>           2) In this case, all the user specified memory ranges will be ingored.
> 
> We also need to consider the following points:
> 1) Using this boot option could cause NUMA performance down because the kernel
>     memory will not be distributed on each node evenly. So for users who don't
>     want to lose their NUMA performance, just don't use it.
> 2) If kernelcore or movablecore is also specified, movablecore_map will have
>     higher priority to be satisfied.
> 3) This option has no conflict with memmap option.
> 


> Tane Chen (10):
>    acpi: Print hotplug info in SRAT.
>    numa, acpi, memory-hotplug: Add movablemem_map=acpi boot option.
>    x86, numa, acpi, memory-hotplug: Introduce hotplug info into struct
>      numa_meminfo.
>    x86, numa, acpi, memory-hotplug: Consider hotplug info when cleanup
>      numa_meminfo.

>    X86, numa, acpi, memory-hotplug: Add hotpluggable ranges to
>      movablemem_map.

It has a whitespace error.

>    x86, numa, acpi, memory-hotplug: Make any node which the kernel
>      resides in un-hotpluggable.

>    x86, numa, acpi, memory-hotplug: Introduce zone_movable_limit[] to
>      store start pfn of ZONE_MOVABLE.

It has a whitespace error.

>    x86, numa, acpi, memory-hotplug: Sanitize zone_movable_limit[].
>    x86, numa, acpi, memory-hotplug: make movablemem_map have higher
>      priority
>    x86, numa, acpi, memory-hotplug: Memblock limit with movablemem_map

Thanks,
Yasuaki Ishimatsu

> 
> Yasuaki Ishimatsu (1):
>    x86: get pg_data_t's memory from other node
> 
>   Documentation/kernel-parameters.txt |   11 ++
>   arch/x86/include/asm/numa.h         |    3 +-
>   arch/x86/kernel/apic/numaq_32.c     |    2 +-
>   arch/x86/mm/amdtopology.c           |    3 +-
>   arch/x86/mm/numa.c                  |   92 ++++++++++++++--
>   arch/x86/mm/numa_internal.h         |    1 +
>   arch/x86/mm/srat.c                  |   28 ++++-
>   include/linux/memblock.h            |    2 +
>   include/linux/mm.h                  |   19 +++
>   mm/memblock.c                       |   50 ++++++++
>   mm/page_alloc.c                     |  210 ++++++++++++++++++++++++++++++++++-
>   11 files changed, 399 insertions(+), 22 deletions(-)
> 
> --
> To unsubscribe, send a message with 'unsubscribe linux-mm' in
> the body to majordomo@kvack.org.  For more info on Linux MM,
> see: http://www.linux-mm.org/ .
> Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
> 


--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>