From: Jiang Liu <jiang.liu@huawei.com>
To: Bob Liu <lliubbo@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Mel Gorman <mgorman@suse.de>, Michal Hocko <mhocko@suse.cz>,
Minchan Kim <minchan@kernel.org>,
Rusty Russell <rusty@rustcorp.com.au>,
Yinghai Lu <yinghai@kernel.org>, Tony Luck <tony.luck@intel.com>,
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>,
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>,
David Rientjes <rientjes@google.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Keping Chen <chenkeping@huawei.com>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org,
Jiang Liu <liuj97@gmail.com>, Wei Wang <Bessel.Wang@huawei.com>
Subject: Re: [PATCH 3/4] mm/hotplug: free zone->pageset when a zone becomes empty
Date: Tue, 24 Jul 2012 17:47:06 +0800 [thread overview]
Message-ID: <500E6F1A.5060206@huawei.com> (raw)
In-Reply-To: <CAA_GA1eePmUsYWrSg2k6TTER+ejciWg2bvGc+1zaAKS8kLNRKw@mail.gmail.com>
Hi Bob,
Yes, we need to handle the wait table too. We has tried to remove the
pgdat and wait table altogether, but found it's really hard to remove pgdat
for empty nodes. I think the candidate solution is to free wait table but
keep pgdat. Any suggestions?
Thanks!
Gerry
On 2012-7-19 15:58, Bob Liu wrote:
> On Thu, Jul 5, 2012 at 5:45 PM, Jiang Liu <jiang.liu@huawei.com> wrote:
>> When a zone becomes empty after memory offlining, free zone->pageset.
>> Otherwise it will cause memory leak when adding memory to the empty
>> zone again because build_all_zonelists() will allocate zone->pageset
>> for an empty zone.
>>
>
> What about other area allocated to the zone? eg. wait_table?
>
>> Signed-off-by: Jiang Liu <liuj97@gmail.com>
>> Signed-off-by: Wei Wang <Bessel.Wang@huawei.com>
>> ---
>> include/linux/mm.h | 1 +
>> mm/memory_hotplug.c | 3 +++
>> mm/page_alloc.c | 13 +++++++++++++
>> 3 files changed, 17 insertions(+), 0 deletions(-)
>>
>> diff --git a/include/linux/mm.h b/include/linux/mm.h
>> index b36d08c..f8b62f2 100644
>> --- a/include/linux/mm.h
>> +++ b/include/linux/mm.h
>> @@ -1331,6 +1331,7 @@ void warn_alloc_failed(gfp_t gfp_mask, int order, const char *fmt, ...);
>> extern void setup_per_cpu_pageset(void);
>>
>> extern void zone_pcp_update(struct zone *zone);
>> +extern void zone_pcp_reset(struct zone *zone);
>>
>> /* nommu.c */
>> extern atomic_long_t mmap_pages_allocated;
>> diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
>> index bce80c7..998b792 100644
>> --- a/mm/memory_hotplug.c
>> +++ b/mm/memory_hotplug.c
>> @@ -966,6 +966,9 @@ repeat:
>>
>> init_per_zone_wmark_min();
>>
>> + if (!populated_zone(zone))
>> + zone_pcp_reset(zone);
>> +
>> if (!node_present_pages(node)) {
>> node_clear_state(node, N_HIGH_MEMORY);
>> kswapd_stop(node);
>> diff --git a/mm/page_alloc.c b/mm/page_alloc.c
>> index ebf319d..5964b7a 100644
>> --- a/mm/page_alloc.c
>> +++ b/mm/page_alloc.c
>> @@ -5872,6 +5872,19 @@ void free_contig_range(unsigned long pfn, unsigned nr_pages)
>> #endif
>>
>> #ifdef CONFIG_MEMORY_HOTREMOVE
>> +void zone_pcp_reset(struct zone *zone)
>> +{
>> + unsigned long flags;
>> +
>> + /* avoid races with drain_pages() */
>> + local_irq_save(flags);
>> + if (zone->pageset != &boot_pageset) {
>> + free_percpu(zone->pageset);
>> + zone->pageset = &boot_pageset;
>> + }
>> + local_irq_restore(flags);
>> +}
>> +
>> /*
>> * All pages in the range must be isolated before calling this.
>> */
>> --
>> 1.7.1
>>
>>
>> --
>> To unsubscribe, send a message with 'unsubscribe linux-mm' in
>> the body to majordomo@kvack.org. For more info on Linux MM,
>> see: http://www.linux-mm.org/ .
>> Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
>
>
>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2012-07-24 9:48 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-05 9:45 [PATCH 1/4] mm/hotplug: correctly setup fallback zonelists when creating new pgdat Jiang Liu
2012-07-05 9:45 ` [PATCH 2/4] mm/hotplug: correctly add new zone to all other nodes' zone lists Jiang Liu
2012-07-05 9:45 ` [PATCH 3/4] mm/hotplug: free zone->pageset when a zone becomes empty Jiang Liu
2012-07-19 7:58 ` Bob Liu
2012-07-24 9:47 ` Jiang Liu [this message]
2012-07-31 7:43 ` Wen Congyang
2012-07-05 9:45 ` [PATCH 4/4] mm/hotplug: mark memory hotplug code in page_alloc.c as __meminit Jiang Liu
2012-07-05 13:26 ` Cong Wang
2012-07-05 12:46 ` [PATCH 1/4] mm/hotplug: correctly setup fallback zonelists when creating new pgdat Cong Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=500E6F1A.5060206@huawei.com \
--to=jiang.liu@huawei.com \
--cc=Bessel.Wang@huawei.com \
--cc=akpm@linux-foundation.org \
--cc=bhelgaas@google.com \
--cc=chenkeping@huawei.com \
--cc=kamezawa.hiroyu@jp.fujitsu.com \
--cc=kosaki.motohiro@jp.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=liuj97@gmail.com \
--cc=lliubbo@gmail.com \
--cc=mgorman@suse.de \
--cc=mhocko@suse.cz \
--cc=minchan@kernel.org \
--cc=rientjes@google.com \
--cc=rusty@rustcorp.com.au \
--cc=tony.luck@intel.com \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox