From: andrey.konovalov@linux.dev
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrey Konovalov <andreyknvl@gmail.com>,
Marco Elver <elver@google.com>,
Alexander Potapenko <glider@google.com>,
Dmitry Vyukov <dvyukov@google.com>,
Andrey Ryabinin <ryabinin.a.a@gmail.com>,
kasan-dev@googlegroups.com, linux-mm@kvack.org,
linux-kernel@vger.kernel.org,
Andrey Konovalov <andreyknvl@google.com>
Subject: [PATCH v2 3/3] kasan: fix zeroing vmalloc memory with HW_TAGS
Date: Thu, 9 Jun 2022 20:18:47 +0200 [thread overview]
Message-ID: <4bc503537efdc539ffc3f461c1b70162eea31cf6.1654798516.git.andreyknvl@google.com> (raw)
In-Reply-To: <1ecaffc0a9c1404d4d7cf52efe0b2dc8a0c681d8.1654798516.git.andreyknvl@google.com>
From: Andrey Konovalov <andreyknvl@google.com>
HW_TAGS KASAN skips zeroing page_alloc allocations backing vmalloc
mappings via __GFP_SKIP_ZERO. Instead, these pages are zeroed via
kasan_unpoison_vmalloc() by passing the KASAN_VMALLOC_INIT flag.
The problem is that __kasan_unpoison_vmalloc() does not zero pages
when either kasan_vmalloc_enabled() or is_vmalloc_or_module_addr() fail.
Thus:
1. Change __vmalloc_node_range() to only set KASAN_VMALLOC_INIT when
__GFP_SKIP_ZERO is set.
2. Change __kasan_unpoison_vmalloc() to always zero pages when the
KASAN_VMALLOC_INIT flag is set.
3. Add WARN_ON() asserts to check that KASAN_VMALLOC_INIT cannot be set
in other early return paths of __kasan_unpoison_vmalloc().
Also clean up the comment in __kasan_unpoison_vmalloc.
Fixes: 23689e91fb22 ("kasan, vmalloc: add vmalloc tagging for HW_TAGS")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
---
Changes v1->v2:
- Add init_vmalloc_pages() helper.
---
mm/kasan/hw_tags.c | 32 +++++++++++++++++++++++---------
mm/vmalloc.c | 10 +++++-----
2 files changed, 28 insertions(+), 14 deletions(-)
diff --git a/mm/kasan/hw_tags.c b/mm/kasan/hw_tags.c
index 9e1b6544bfa8..9ad8eff71b28 100644
--- a/mm/kasan/hw_tags.c
+++ b/mm/kasan/hw_tags.c
@@ -257,27 +257,37 @@ static void unpoison_vmalloc_pages(const void *addr, u8 tag)
}
}
+static void init_vmalloc_pages(const void *start, unsigned long size)
+{
+ const void *addr;
+
+ for (addr = start; addr < start + size; addr += PAGE_SIZE) {
+ struct page *page = virt_to_page(addr);
+
+ clear_highpage_kasan_tagged(page);
+ }
+}
+
void *__kasan_unpoison_vmalloc(const void *start, unsigned long size,
kasan_vmalloc_flags_t flags)
{
u8 tag;
unsigned long redzone_start, redzone_size;
- if (!kasan_vmalloc_enabled())
- return (void *)start;
-
- if (!is_vmalloc_or_module_addr(start))
+ if (!kasan_vmalloc_enabled() || !is_vmalloc_or_module_addr(start)) {
+ if (flags & KASAN_VMALLOC_INIT)
+ init_vmalloc_pages(start, size);
return (void *)start;
+ }
/*
- * Skip unpoisoning and assigning a pointer tag for non-VM_ALLOC
- * mappings as:
+ * Don't tag non-VM_ALLOC mappings, as:
*
* 1. Unlike the software KASAN modes, hardware tag-based KASAN only
* supports tagging physical memory. Therefore, it can only tag a
* single mapping of normal physical pages.
* 2. Hardware tag-based KASAN can only tag memory mapped with special
- * mapping protection bits, see arch_vmalloc_pgprot_modify().
+ * mapping protection bits, see arch_vmap_pgprot_tagged().
* As non-VM_ALLOC mappings can be mapped outside of vmalloc code,
* providing these bits would require tracking all non-VM_ALLOC
* mappers.
@@ -289,15 +299,19 @@ void *__kasan_unpoison_vmalloc(const void *start, unsigned long size,
*
* For non-VM_ALLOC allocations, page_alloc memory is tagged as usual.
*/
- if (!(flags & KASAN_VMALLOC_VM_ALLOC))
+ if (!(flags & KASAN_VMALLOC_VM_ALLOC)) {
+ WARN_ON(flags & KASAN_VMALLOC_INIT);
return (void *)start;
+ }
/*
* Don't tag executable memory.
* The kernel doesn't tolerate having the PC register tagged.
*/
- if (!(flags & KASAN_VMALLOC_PROT_NORMAL))
+ if (!(flags & KASAN_VMALLOC_PROT_NORMAL)) {
+ WARN_ON(flags & KASAN_VMALLOC_INIT);
return (void *)start;
+ }
tag = kasan_random_tag();
start = set_tag(start, tag);
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 07db42455dd4..0adf4aa1514d 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -3168,15 +3168,15 @@ void *__vmalloc_node_range(unsigned long size, unsigned long align,
/*
* Mark the pages as accessible, now that they are mapped.
- * The init condition should match the one in post_alloc_hook()
- * (except for the should_skip_init() check) to make sure that memory
- * is initialized under the same conditions regardless of the enabled
- * KASAN mode.
+ * The condition for setting KASAN_VMALLOC_INIT should complement the
+ * one in post_alloc_hook() with regards to the __GFP_SKIP_ZERO check
+ * to make sure that memory is initialized under the same conditions.
* Tag-based KASAN modes only assign tags to normal non-executable
* allocations, see __kasan_unpoison_vmalloc().
*/
kasan_flags |= KASAN_VMALLOC_VM_ALLOC;
- if (!want_init_on_free() && want_init_on_alloc(gfp_mask))
+ if (!want_init_on_free() && want_init_on_alloc(gfp_mask) &&
+ (gfp_mask & __GFP_SKIP_ZERO))
kasan_flags |= KASAN_VMALLOC_INIT;
/* KASAN_VMALLOC_PROT_NORMAL already set if required. */
area->addr = kasan_unpoison_vmalloc(area->addr, real_size, kasan_flags);
--
2.25.1
next prev parent reply other threads:[~2022-06-09 18:18 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-09 18:18 [PATCH v2 1/3] mm: rename kernel_init_free_pages to kernel_init_pages andrey.konovalov
2022-06-09 18:18 ` [PATCH v2 2/3] mm: introduce clear_highpage_kasan_tagged andrey.konovalov
2022-06-09 18:18 ` andrey.konovalov [this message]
2022-06-13 12:20 ` [PATCH v2 1/3] mm: rename kernel_init_free_pages to kernel_init_pages Muchun Song
2022-06-17 2:23 ` Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4bc503537efdc539ffc3f461c1b70162eea31cf6.1654798516.git.andreyknvl@google.com \
--to=andrey.konovalov@linux.dev \
--cc=akpm@linux-foundation.org \
--cc=andreyknvl@gmail.com \
--cc=andreyknvl@google.com \
--cc=dvyukov@google.com \
--cc=elver@google.com \
--cc=glider@google.com \
--cc=kasan-dev@googlegroups.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=ryabinin.a.a@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox