From: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
To: linux-mm@kvack.org, linux-kernel@vger.kernel.org,
linuxppc-dev@lists.ozlabs.org, linux-acpi@vger.kernel.org
Cc: rientjes@google.com, liuj97@gmail.com, len.brown@intel.com,
benh@kernel.crashing.org, paulus@samba.org, cl@linux.com,
minchan.kim@gmail.com, akpm@linux-foundation.org,
kosaki.motohiro@jp.fujitsu.com
Subject: [RFC PATCH v2 5/13] memory-hotplug : does not release memory region in PAGES_PER_SECTION chunks
Date: Tue, 3 Jul 2012 14:58:26 +0900 [thread overview]
Message-ID: <4FF28A02.6060802@jp.fujitsu.com> (raw)
In-Reply-To: <4FF287C3.4030901@jp.fujitsu.com>
Since applying a patch(de7f0cba96786c), release_mem_region() has been changed
as called in PAGES_PER_SECTION chunks because register_memory_resource() is
called in PAGES_PER_SECTION chunks by add_memory(). But it seems firmware
dependency. If CRS are written in the PAGES_PER_SECTION chunks in ACPI DSDT
Table, register_memory_resource() is called in PAGES_PER_SECTION chunks.
But if CRS are written in the DIMM unit in ACPI DSDT Table,
register_memory_resource() is called in DIMM unit. So release_mem_region()
should not be called in PAGES_PER_SECTION chunks. The patch fixes it.
CC: David Rientjes <rientjes@google.com>
CC: Jiang Liu <liuj97@gmail.com>
CC: Len Brown <len.brown@intel.com>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: Paul Mackerras <paulus@samba.org>
CC: Christoph Lameter <cl@linux.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
---
arch/powerpc/platforms/pseries/hotplug-memory.c | 13 +++++++++----
mm/memory_hotplug.c | 4 ++--
2 files changed, 11 insertions(+), 6 deletions(-)
Index: linux-3.5-rc4/mm/memory_hotplug.c
===================================================================
--- linux-3.5-rc4.orig/mm/memory_hotplug.c 2012-07-03 14:22:03.549198802 +0900
+++ linux-3.5-rc4/mm/memory_hotplug.c 2012-07-03 14:22:05.919169458 +0900
@@ -358,11 +358,11 @@ int __remove_pages(struct zone *zone, un
BUG_ON(phys_start_pfn & ~PAGE_SECTION_MASK);
BUG_ON(nr_pages % PAGES_PER_SECTION);
+ release_mem_region(phys_start_pfn << PAGE_SHIFT, nr_pages * PAGE_SIZE);
+
sections_to_remove = nr_pages / PAGES_PER_SECTION;
for (i = 0; i < sections_to_remove; i++) {
unsigned long pfn = phys_start_pfn + i*PAGES_PER_SECTION;
- release_mem_region(pfn << PAGE_SHIFT,
- PAGES_PER_SECTION << PAGE_SHIFT);
ret = __remove_section(zone, __pfn_to_section(pfn));
if (ret)
break;
Index: linux-3.5-rc4/arch/powerpc/platforms/pseries/hotplug-memory.c
===================================================================
--- linux-3.5-rc4.orig/arch/powerpc/platforms/pseries/hotplug-memory.c 2012-07-03 14:21:45.641422678
+0900
+++ linux-3.5-rc4/arch/powerpc/platforms/pseries/hotplug-memory.c 2012-07-03 14:22:05.920169437 +0900
@@ -77,7 +77,8 @@ static int pseries_remove_memblock(unsig
{
unsigned long start, start_pfn;
struct zone *zone;
- int ret;
+ int i, ret;
+ int sections_to_remove;
start_pfn = base >> PAGE_SHIFT;
@@ -97,9 +98,13 @@ static int pseries_remove_memblock(unsig
* to sysfs "state" file and we can't remove sysfs entries
* while writing to it. So we have to defer it to here.
*/
- ret = __remove_pages(zone, start_pfn, memblock_size >> PAGE_SHIFT);
- if (ret)
- return ret;
+ sections_to_remove = (memblock_size >> PAGE_SHIFT) / PAGES_PER_SECTION;
+ for (i = 0; i < sections_to_remove; i++) {
+ unsigned long pfn = start_pfn + i * PAGES_PER_SECTION;
+ ret = __remove_pages(zone, start_pfn, PAGES_PER_SECTION);
+ if (ret)
+ return ret;
+ }
/*
* Update memory regions for memory remove
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2012-07-03 5:58 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-03 5:48 [RFC PATCH v2 0/13] memory-hotplug : hot-remove physical memory Yasuaki Ishimatsu
2012-07-03 5:52 ` [RFC PATCH v2 1/13] memory-hotplug : rename remove_memory to offline_memory Yasuaki Ishimatsu
2012-07-03 5:54 ` [RFC PATCH v2 2/13] memory-hotplug : add physical memory hotplug code to acpi_memory_device_remove Yasuaki Ishimatsu
2012-07-03 6:21 ` Wen Congyang
2012-07-03 7:40 ` Yasuaki Ishimatsu
2012-07-03 7:49 ` Wen Congyang
2012-07-03 5:55 ` [RFC PATCH v2 3/13] unify argument of firmware_map_add_early/hotplug Yasuaki Ishimatsu
2012-07-03 5:56 ` [RFC PATCH v2 4/13] memory-hotplug : remove /sys/firmware/memmap/X sysfs Yasuaki Ishimatsu
2012-07-03 6:35 ` Wen Congyang
2012-07-04 4:45 ` Yasuaki Ishimatsu
2012-07-04 5:08 ` Wen Congyang
2012-07-04 5:52 ` Yasuaki Ishimatsu
2012-07-04 10:01 ` Wen Congyang
2012-07-06 8:27 ` Yasuaki Ishimatsu
2012-07-06 9:20 ` Wen Congyang
2012-07-09 8:18 ` Yasuaki Ishimatsu
2012-07-03 5:58 ` Yasuaki Ishimatsu [this message]
2012-07-03 5:59 ` [RFC PATCH v2 6/13] memory-hotplug : add memory_block_release Yasuaki Ishimatsu
2012-07-03 6:00 ` [RFC PATCH v2 7/13] memory-hotplug : remove_memory calls __remove_pages Yasuaki Ishimatsu
2012-07-03 6:01 ` [RFC PATCH v2 8/13] memory-hotplug : check page type in get_page_bootmem Yasuaki Ishimatsu
2012-07-03 6:02 ` [RFC PATCH v2 9/13] memory-hotplug : move register_page_bootmem_info_node and put_page_bootmem for sparse-vmemmap Yasuaki Ishimatsu
2012-07-03 6:03 ` [RFC PATCH v2 10/13] memory-hotplug : implement register_page_bootmem_info_section of sparse-vmemmap Yasuaki Ishimatsu
2012-07-03 6:04 ` [RFC PATCH v2 11/13] memory-hotplug : free memmap " Yasuaki Ishimatsu
2012-07-03 6:05 ` [RFC PATCH v2 12/13] memory-hotplug : add node_device_release Yasuaki Ishimatsu
2012-07-03 6:06 ` [RFC PATCH v2 13/13] memory-hotplug : remove sysfs file of node Yasuaki Ishimatsu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FF28A02.6060802@jp.fujitsu.com \
--to=isimatu.yasuaki@jp.fujitsu.com \
--cc=akpm@linux-foundation.org \
--cc=benh@kernel.crashing.org \
--cc=cl@linux.com \
--cc=kosaki.motohiro@jp.fujitsu.com \
--cc=len.brown@intel.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=liuj97@gmail.com \
--cc=minchan.kim@gmail.com \
--cc=paulus@samba.org \
--cc=rientjes@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox