From: Glauber Costa <glommer@parallels.com>
To: Glauber Costa <glommer@parallels.com>
Cc: cgroups@vger.kernel.org, linux-mm@kvack.org,
linux-kernel@vger.kernel.org, devel@openvz.org,
kamezawa.hiroyu@jp.fujitsu.com, Michal Hocko <mhocko@suse.cz>,
Johannes Weiner <hannes@cmpxchg.org>,
Frederic Weisbecker <fweisbec@gmail.com>,
Greg Thelen <gthelen@google.com>,
Suleiman Souhlal <suleiman@google.com>
Subject: Re: [PATCH 00/23] slab+slub accounting for memcg
Date: Sun, 22 Apr 2012 20:59:15 -0300 [thread overview]
Message-ID: <4F949B53.5030705@parallels.com> (raw)
In-Reply-To: <1334959051-18203-1-git-send-email-glommer@parallels.com>
On 04/20/2012 06:57 PM, Glauber Costa wrote:
> Hi,
>
> This is my current attempt at getting the kmem controller
> into a mergeable state. IMHO, all the important bits are there, and it should't
> change *that* much from now on. I am, however, expecting at least a couple more
> interactions before we sort all the edges out.
>
> This series works for both the slub and the slab. One of my main goals was to
> make sure that the interfaces we are creating actually makes sense for both
> allocators.
>
> I did some adaptations to the slab-specific patches, but the bulk of it
> comes from Suleiman's patches. I did the best to use his patches
> as-is where possible so to keep authorship information. When not possible,
> I tried to be fair and quote it in the commit message.
>
> In this series, all existing caches are created per-memcg after its first hit.
> The main reason is, during discussions in the memory summit we came into
> agreement that the fragmentation problems that could arise from creating all
> of them are mitigated by the typically small quantity of caches in the system
> (order of a few megabytes total for sparsely used caches).
> The lazy creation from Suleiman is kept, although a bit modified. For instance,
> I now use a locked scheme instead of cmpxcgh to make sure cache creation won't
> fail due to duplicates, which simplifies things by quite a bit.
>
> The slub is a bit more complex than what I came up with in my slub-only
> series. The reason is we did not need to use the cache-selection logic
> in the allocator itself - it was done by the cache users. But since now
> we are lazy creating all caches, this is simply no longer doable.
>
> I am leaving destruction of caches out of the series, although most
> of the infrastructure for that is here, since we did it in earlier
> series. This is basically because right now Kame is reworking it for
> user memcg, and I like the new proposed behavior a lot more. We all seemed
> to have agreed that reclaim is an interesting problem by itself, and
> is not included in this already too complicated series. Please note
> that this is still marked as experimental, so we have so room. A proper
> shrinker implementation is a hard requirement to take the kmem controller
> out of the experimental state.
>
> I am also not including documentation, but it should only be a matter
> of merging what we already wrote in earlier series plus some additions.
>
> Glauber Costa (19):
> slub: don't create a copy of the name string in kmem_cache_create
> slub: always get the cache from its page in kfree
> slab: rename gfpflags to allocflags
> slab: use obj_size field of struct kmem_cache when not debugging
> change defines to an enum
> don't force return value checking in res_counter_charge_nofail
> kmem slab accounting basic infrastructure
> slab/slub: struct memcg_params
> slub: consider a memcg parameter in kmem_create_cache
> slab: pass memcg parameter to kmem_cache_create
> slub: create duplicate cache
> slub: provide kmalloc_no_account
> slab: create duplicate cache
> slab: provide kmalloc_no_account
> kmem controller charge/uncharge infrastructure
> slub: charge allocation to a memcg
> slab: per-memcg accounting of slab caches
> memcg: disable kmem code when not in use.
> slub: create slabinfo file for memcg
>
> Suleiman Souhlal (4):
> memcg: Make it possible to use the stock for more than one page.
> memcg: Reclaim when more than one page needed.
> memcg: Track all the memcg children of a kmem_cache.
> memcg: Per-memcg memory.kmem.slabinfo file.
>
> include/linux/memcontrol.h | 87 ++++++
> include/linux/res_counter.h | 2 +-
> include/linux/slab.h | 26 ++
> include/linux/slab_def.h | 77 ++++++-
> include/linux/slub_def.h | 36 +++-
> init/Kconfig | 2 +-
> mm/memcontrol.c | 607 +++++++++++++++++++++++++++++++++++++++++--
> mm/slab.c | 390 +++++++++++++++++++++++-----
> mm/slub.c | 255 ++++++++++++++++--
> 9 files changed, 1364 insertions(+), 118 deletions(-)
>
All patches should be there now.
Sorry for the trouble.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Fight unfair telecom internet charges in Canada: sign http://stopthemeter.ca/
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2012-04-23 0:01 UTC|newest]
Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-20 21:57 Glauber Costa
2012-04-20 21:57 ` [PATCH 01/23] slub: don't create a copy of the name string in kmem_cache_create Glauber Costa
2012-04-20 21:57 ` [PATCH 02/23] slub: always get the cache from its page in kfree Glauber Costa
2012-04-20 21:57 ` [PATCH 03/23] slab: rename gfpflags to allocflags Glauber Costa
2012-04-20 21:57 ` [PATCH 04/23] memcg: Make it possible to use the stock for more than one page Glauber Costa
2012-04-25 0:59 ` KAMEZAWA Hiroyuki
2012-04-20 21:57 ` [PATCH 05/23] memcg: Reclaim when more than one page needed Glauber Costa
2012-04-25 1:16 ` KAMEZAWA Hiroyuki
2012-04-20 21:57 ` [PATCH 06/23] slab: use obj_size field of struct kmem_cache when not debugging Glauber Costa
2012-04-20 21:57 ` [PATCH 07/23] change defines to an enum Glauber Costa
2012-04-25 1:18 ` KAMEZAWA Hiroyuki
2012-04-20 21:57 ` [PATCH 08/23] don't force return value checking in res_counter_charge_nofail Glauber Costa
2012-04-25 1:28 ` KAMEZAWA Hiroyuki
2012-04-20 21:57 ` [PATCH 09/23] kmem slab accounting basic infrastructure Glauber Costa
2012-04-25 1:32 ` KAMEZAWA Hiroyuki
2012-04-25 14:38 ` Glauber Costa
2012-04-26 0:08 ` KAMEZAWA Hiroyuki
2012-04-30 19:33 ` Suleiman Souhlal
2012-05-02 15:15 ` Glauber Costa
2012-04-20 21:57 ` [PATCH 10/23] slab/slub: struct memcg_params Glauber Costa
2012-04-30 19:42 ` Suleiman Souhlal
2012-04-20 21:57 ` [PATCH 11/23] slub: consider a memcg parameter in kmem_create_cache Glauber Costa
2012-04-24 14:03 ` Frederic Weisbecker
2012-04-24 14:27 ` Glauber Costa
2012-04-25 1:38 ` KAMEZAWA Hiroyuki
2012-04-25 14:37 ` Glauber Costa
2012-04-30 19:51 ` Suleiman Souhlal
2012-05-02 15:18 ` Glauber Costa
2012-04-22 23:53 ` [PATCH 12/23] slab: pass memcg parameter to kmem_cache_create Glauber Costa
2012-04-30 19:54 ` Suleiman Souhlal
2012-04-22 23:53 ` [PATCH 13/23] slub: create duplicate cache Glauber Costa
2012-04-24 14:18 ` Frederic Weisbecker
2012-04-24 14:37 ` Glauber Costa
2012-04-26 13:10 ` Frederic Weisbecker
2012-04-30 20:15 ` Suleiman Souhlal
2012-04-22 23:53 ` [PATCH 14/23] slub: provide kmalloc_no_account Glauber Costa
2012-04-22 23:53 ` [PATCH 15/23] slab: create duplicate cache Glauber Costa
2012-04-22 23:53 ` [PATCH 16/23] slab: provide kmalloc_no_account Glauber Costa
2012-04-25 1:44 ` KAMEZAWA Hiroyuki
2012-04-25 14:29 ` Glauber Costa
2012-04-26 0:13 ` KAMEZAWA Hiroyuki
2012-04-22 23:53 ` [PATCH 17/23] kmem controller charge/uncharge infrastructure Glauber Costa
2012-04-23 22:25 ` David Rientjes
2012-04-24 14:22 ` Frederic Weisbecker
2012-04-24 14:40 ` Glauber Costa
2012-04-24 20:25 ` David Rientjes
2012-04-24 21:36 ` Glauber Costa
2012-04-24 22:54 ` David Rientjes
2012-04-25 14:43 ` Glauber Costa
2012-04-24 20:21 ` David Rientjes
2012-04-27 11:38 ` Frederic Weisbecker
2012-04-27 18:13 ` David Rientjes
2012-04-25 1:56 ` KAMEZAWA Hiroyuki
2012-04-25 14:44 ` Glauber Costa
2012-04-27 12:22 ` Frederic Weisbecker
2012-04-30 20:56 ` Suleiman Souhlal
2012-05-02 15:34 ` Glauber Costa
2012-04-22 23:53 ` [PATCH 18/23] slub: charge allocation to a memcg Glauber Costa
2012-04-22 23:53 ` [PATCH 19/23] slab: per-memcg accounting of slab caches Glauber Costa
2012-04-30 21:25 ` Suleiman Souhlal
2012-05-02 15:40 ` Glauber Costa
2012-04-22 23:53 ` [PATCH 20/23] memcg: disable kmem code when not in use Glauber Costa
2012-04-22 23:53 ` [PATCH 21/23] memcg: Track all the memcg children of a kmem_cache Glauber Costa
2012-04-22 23:53 ` [PATCH 22/23] memcg: Per-memcg memory.kmem.slabinfo file Glauber Costa
2012-04-22 23:53 ` [PATCH 23/23] slub: create slabinfo file for memcg Glauber Costa
2012-04-22 23:59 ` Glauber Costa [this message]
2012-04-30 9:59 ` [PATCH 0/3] A few fixes for '[PATCH 00/23] slab+slub accounting for memcg' series Anton Vorontsov
2012-04-30 10:01 ` [PATCH 1/3] slab: Proper off-slabs handling when duplicating caches Anton Vorontsov
2012-04-30 10:01 ` [PATCH 2/3] slab: Fix imbalanced rcu locking Anton Vorontsov
2012-04-30 10:02 ` [PATCH 3/3] slab: Get rid of mem_cgroup_put_kmem_cache() Anton Vorontsov
-- strict thread matches above, loose matches on Subject: below --
2012-04-20 21:48 [PATCH 00/23] slab+slub accounting for memcg Glauber Costa
2012-04-20 22:01 ` Glauber Costa
2012-04-30 21:43 ` Suleiman Souhlal
2012-05-02 15:14 ` Glauber Costa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F949B53.5030705@parallels.com \
--to=glommer@parallels.com \
--cc=cgroups@vger.kernel.org \
--cc=devel@openvz.org \
--cc=fweisbec@gmail.com \
--cc=gthelen@google.com \
--cc=hannes@cmpxchg.org \
--cc=kamezawa.hiroyu@jp.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mhocko@suse.cz \
--cc=suleiman@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox