linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
To: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>,
	linux-mm@kvack.org, Andrew Morton <akpm@linux-foundation.org>,
	David Rientjes <rientjes@google.com>,
	Andi Kleen <andi@firstfloor.org>,
	Wu Fengguang <fengguang.wu@intel.com>,
	Andrea Arcangeli <aarcange@redhat.com>,
	KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>,
	KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/4] thp: optimize away unnecessary page table locking
Date: Tue, 03 Jan 2012 15:08:33 -0500	[thread overview]
Message-ID: <4F036041.4090605@ah.jp.nec.com> (raw)
In-Reply-To: <4EFD3739.7070609@gmail.com>

On Thu, Dec 29, 2011 at 10:59:53PM -0500, KOSAKI Motohiro wrote:
...
> > @@ -689,26 +681,19 @@ static int pagemap_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end,
> >   	/* find the first VMA at or above 'addr' */
> >   	vma = find_vma(walk->mm, addr);
> > 
> > -	spin_lock(&walk->mm->page_table_lock);
> > -	if (pmd_trans_huge(*pmd)) {
> > -		if (pmd_trans_splitting(*pmd)) {
> > -			spin_unlock(&walk->mm->page_table_lock);
> > -			wait_split_huge_page(vma->anon_vma, pmd);
> > -		} else {
> > -			for (; addr != end; addr += PAGE_SIZE) {
> > -				int offset = (addr&  ~PAGEMAP_WALK_MASK)
> > -					>>  PAGE_SHIFT;
> > -				pfn = thp_pte_to_pagemap_entry(*(pte_t *)pmd,
> > -							       offset);
> > -				err = add_to_pagemap(addr, pfn, pm);
> > -				if (err)
> > -					break;
> > -			}
> > -			spin_unlock(&walk->mm->page_table_lock);
> > -			return err;
> > +	/* David comment */
> 
> This commnet doesn't explain anything.

Sorry, I forgot to remove.

...
> > diff --git 3.2-rc5.orig/mm/huge_memory.c 3.2-rc5/mm/huge_memory.c
> > index 36b3d98..b73c744 100644
> > --- 3.2-rc5.orig/mm/huge_memory.c
> > +++ 3.2-rc5/mm/huge_memory.c
...
> > @@ -1104,27 +1080,45 @@ int change_huge_pmd(struct vm_area_struct *vma, pmd_t *pmd,
> >   	struct mm_struct *mm = vma->vm_mm;
> >   	int ret = 0;
> > 
> > -	spin_lock(&mm->page_table_lock);
> > -	if (likely(pmd_trans_huge(*pmd))) {
> > -		if (unlikely(pmd_trans_splitting(*pmd))) {
> > -			spin_unlock(&mm->page_table_lock);
> > -			wait_split_huge_page(vma->anon_vma, pmd);
> > -		} else {
> > -			pmd_t entry;
> > +	if (likely(check_and_wait_split_huge_pmd(pmd, vma))) {
> > +		pmd_t entry;
> > 
> > -			entry = pmdp_get_and_clear(mm, addr, pmd);
> > -			entry = pmd_modify(entry, newprot);
> > -			set_pmd_at(mm, addr, pmd, entry);
> > -			spin_unlock(&vma->vm_mm->page_table_lock);
> > -			flush_tlb_range(vma, addr, addr + HPAGE_PMD_SIZE);
> > -			ret = 1;
> > -		}
> > -	} else
> > +		entry = pmdp_get_and_clear(mm, addr, pmd);
> > +		entry = pmd_modify(entry, newprot);
> > +		set_pmd_at(mm, addr, pmd, entry);
> >   		spin_unlock(&vma->vm_mm->page_table_lock);
> > +		flush_tlb_range(vma, addr, addr + HPAGE_PMD_SIZE);
> > +		ret = 1;
> > +	}
> > 
> >   	return ret;
> >   }
> > 
> > +/*
> > + * Returns 1 if a given pmd is mapping a thp and stable (not under splitting.)
> > + * Returns 0 otherwise. Note that if it returns 1, this routine returns without
> > + * unlocking page table locks. So callers must unlock them.
> > + */
> > +int check_and_wait_split_huge_pmd(pmd_t *pmd, struct vm_area_struct *vma)
> 
> We always should avoid a name of "check". It doesn't explain what the
> function does.

How about pmd_trans_huge_stable()?

> 
> > +{
> 
> VM_BUG_ON(!rwsem_is_locked(vma->mm)) here?

OK, I will add VM_BUG_ON(!rwsem_is_locked(vma->mm->mmap_sem)),
which helps us make sure that new user of this function holds mmap_sem.

> > +	if (!pmd_trans_huge(*pmd))
> > +		return 0;
> > +
> > +	spin_lock(&vma->vm_mm->page_table_lock);
> > +	if (likely(pmd_trans_huge(*pmd))) {
> > +		if (pmd_trans_splitting(*pmd)) {
> > +			spin_unlock(&vma->vm_mm->page_table_lock);
> > +			wait_split_huge_page(vma->anon_vma, pmd);
> > +		} else {
> > +			/* Thp mapped by 'pmd' is stable, so we can
> > +			 * handle it as it is. */
> > +			return 1;
> > +		}
> > +	}
> > +	spin_unlock(&vma->vm_mm->page_table_lock);
> > +	return 0;
> > +}
> > +
> >   pmd_t *page_check_address_pmd(struct page *page,
> >   			      struct mm_struct *mm,
> >   			      unsigned long address,
> > diff --git 3.2-rc5.orig/mm/mremap.c 3.2-rc5/mm/mremap.c
> > index d6959cb..d534668 100644
> > --- 3.2-rc5.orig/mm/mremap.c
> > +++ 3.2-rc5/mm/mremap.c
> > @@ -155,9 +155,8 @@ unsigned long move_page_tables(struct vm_area_struct *vma,
> >   			if (err>  0) {
> >   				need_flush = true;
> >   				continue;
> > -			} else if (!err) {
> > -				split_huge_page_pmd(vma->vm_mm, old_pmd);
> >   			}
> > +			split_huge_page_pmd(vma->vm_mm, old_pmd);
> 
> unrelated hunk?

All users (except one) of the logic which I want to replace with
check_and_wait_split_huge_pmd() expect it to return:
  1: when pmd maps thp and is not under splitting,
  0: when pmd maps thp and is under splitting,
  0: when pmd doesn't map thp.

But only move_huge_pmd() expects differently:
  1: when pmd maps thp and is not under splitting,
 -1: when pmd maps thp and is under splitting,
  0: when pmd doesn't map thp.

move_huge_pmd() is used only around the above hunk, so I chose to change
the caller. It makes no behavioral change because split_huge_page_pmd()
does nothing when old_pmd doesn't map thp.
Is it better to separate changing return value into another patch?

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Fight unfair telecom internet charges in Canada: sign http://stopthemeter.ca/
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  reply	other threads:[~2012-01-03 20:09 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-12-21 22:23 [PATCH 0/4 v2] pagemap handles transparent hugepage Naoya Horiguchi
2011-12-21 22:23 ` [PATCH 1/4] pagemap: avoid splitting thp when reading /proc/pid/pagemap Naoya Horiguchi
2011-12-26  8:26   ` KAMEZAWA Hiroyuki
2011-12-30  3:39   ` KOSAKI Motohiro
2012-01-03 20:07     ` Naoya Horiguchi
2012-01-03 21:06       ` KOSAKI Motohiro
2012-01-03 21:31         ` Naoya Horiguchi
2012-01-04 23:50   ` Andrew Morton
2012-01-05 16:28     ` Naoya Horiguchi
2011-12-21 22:23 ` [PATCH 2/4] thp: optimize away unnecessary page table locking Naoya Horiguchi
2011-12-22 13:04   ` Hillf Danton
2011-12-22 16:01     ` Naoya Horiguchi
2011-12-30  3:59   ` KOSAKI Motohiro
2012-01-03 20:08     ` Naoya Horiguchi [this message]
2011-12-21 22:23 ` [PATCH 3/4] pagemap: export KPF_THP Naoya Horiguchi
2011-12-26  8:40   ` KAMEZAWA Hiroyuki
2011-12-30  4:01   ` KOSAKI Motohiro
2012-01-04 23:55   ` Andrew Morton
2011-12-21 22:23 ` [PATCH 4/4] pagemap: document KPF_THP and make page-types aware of it Naoya Horiguchi
2011-12-26  8:42   ` KAMEZAWA Hiroyuki
2011-12-30  4:02   ` KOSAKI Motohiro
2012-01-04 23:57   ` Andrew Morton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4F036041.4090605@ah.jp.nec.com \
    --to=n-horiguchi@ah.jp.nec.com \
    --cc=aarcange@redhat.com \
    --cc=akpm@linux-foundation.org \
    --cc=andi@firstfloor.org \
    --cc=fengguang.wu@intel.com \
    --cc=kamezawa.hiroyu@jp.fujitsu.com \
    --cc=kosaki.motohiro@gmail.com \
    --cc=kosaki.motohiro@jp.fujitsu.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=rientjes@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox