From: Dave Jiang <dave.jiang@intel.com>
To: shiju.jose@huawei.com, linux-edac@vger.kernel.org,
linux-cxl@vger.kernel.org, linux-acpi@vger.kernel.org,
linux-mm@kvack.org, linux-kernel@vger.kernel.org
Cc: bp@alien8.de, tony.luck@intel.com, rafael@kernel.org,
lenb@kernel.org, mchehab@kernel.org, dan.j.williams@intel.com,
dave@stgolabs.net, jonathan.cameron@huawei.com,
gregkh@linuxfoundation.org, sudeep.holla@arm.com,
jassisinghbrar@gmail.com, alison.schofield@intel.com,
vishal.l.verma@intel.com, ira.weiny@intel.com, david@redhat.com,
Vilas.Sridharan@amd.com, leo.duran@amd.com,
Yazen.Ghannam@amd.com, rientjes@google.com, jiaqiyan@google.com,
Jon.Grimm@amd.com, dave.hansen@linux.intel.com,
naoya.horiguchi@nec.com, james.morse@arm.com,
jthoughton@google.com, somasundaram.a@hpe.com,
erdemaktas@google.com, pgonda@google.com, duenwen@google.com,
gthelen@google.com, wschwartz@amperecomputing.com,
dferguson@amperecomputing.com, wbs@os.amperecomputing.com,
nifan.cxl@gmail.com, tanxiaofei@huawei.com,
prime.zeng@hisilicon.com, roberto.sassu@huawei.com,
kangkang.shen@futurewei.com, wanghuiqiang@huawei.com,
linuxarm@huawei.com
Subject: Re: [PATCH v15 04/15] cxl: Add Get Supported Features command for kernel usage
Date: Wed, 6 Nov 2024 16:34:49 -0700 [thread overview]
Message-ID: <49228a3c-23b0-4aac-9c7f-e605045e3c8f@intel.com> (raw)
In-Reply-To: <20241101091735.1465-5-shiju.jose@huawei.com>
On 11/1/24 2:17 AM, shiju.jose@huawei.com wrote:
> From: Dave Jiang <dave.jiang@intel.com>
>
> CXL spec r3.1 8.2.9.6.1 Get Supported Features (Opcode 0500h)
> The command retrieve the list of supported device-specific features
> (identified by UUID) and general information about each Feature.
>
> The driver will retrieve the feature entries in order to make checks and
> provide information for the Get Feature and Set Feature command. One of
> the main piece of information retrieved are the effects a Set Feature
> command would have for a particular feature.
>
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Signed-off-by: Dave Jiang <dave.jiang@intel.com>
> Co-developed-by: Shiju Jose <shiju.jose@huawei.com>
> Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Found couple endien conversion changes below:
> ---
> drivers/cxl/core/mbox.c | 175 +++++++++++++++++++++++++++++++++++
> drivers/cxl/cxlmem.h | 47 ++++++++++
> drivers/cxl/pci.c | 4 +
> include/cxl/mailbox.h | 4 +
> include/uapi/linux/cxl_mem.h | 1 +
> 5 files changed, 231 insertions(+)
>
> diff --git a/drivers/cxl/core/mbox.c b/drivers/cxl/core/mbox.c
> index 5175138c4fb7..5045960e3bfe 100644
> --- a/drivers/cxl/core/mbox.c
> +++ b/drivers/cxl/core/mbox.c
> @@ -67,6 +67,7 @@ static struct cxl_mem_command cxl_mem_commands[CXL_MEM_COMMAND_ID_MAX] = {
> CXL_CMD(SET_SHUTDOWN_STATE, 0x1, 0, 0),
> CXL_CMD(GET_SCAN_MEDIA_CAPS, 0x10, 0x4, 0),
> CXL_CMD(GET_TIMESTAMP, 0, 0x8, 0),
> + CXL_CMD(GET_SUPPORTED_FEATURES, 0x8, CXL_VARIABLE_PAYLOAD, 0),
> };
>
> /*
> @@ -795,6 +796,180 @@ static const uuid_t log_uuid[] = {
> [VENDOR_DEBUG_UUID] = DEFINE_CXL_VENDOR_DEBUG_UUID,
> };
>
> +static void cxl_free_features(void *features)
> +{
> + kvfree(features);
> +}
> +
> +static int cxl_get_supported_features_count(struct cxl_dev_state *cxlds)
> +{
> + struct cxl_mailbox *cxl_mbox = &cxlds->cxl_mbox;
> + struct cxl_mbox_get_sup_feats_out mbox_out;
> + struct cxl_mbox_get_sup_feats_in mbox_in;
> + struct cxl_mbox_cmd mbox_cmd;
> + int rc;
> +
> + memset(&mbox_in, 0, sizeof(mbox_in));
> + mbox_in.count = sizeof(mbox_out);
mbox_in.count = cpu_to_le32(sizeof(mbox_out));
> + memset(&mbox_out, 0, sizeof(mbox_out));
> + mbox_cmd = (struct cxl_mbox_cmd) {
> + .opcode = CXL_MBOX_OP_GET_SUPPORTED_FEATURES,
> + .size_in = sizeof(mbox_in),
> + .payload_in = &mbox_in,
> + .size_out = sizeof(mbox_out),
> + .payload_out = &mbox_out,
> + .min_out = sizeof(mbox_out),
> + };
> + rc = cxl_internal_send_cmd(cxl_mbox, &mbox_cmd);
> + if (rc < 0)
> + return rc;
> +
> + cxl_mbox->num_features = le16_to_cpu(mbox_out.supported_feats);
> + if (!cxl_mbox->num_features)
> + return -ENOENT;
> +
> + return 0;
> +}
> +
> +int cxl_get_supported_features(struct cxl_memdev_state *mds)
> +{
> + int remain_feats, max_size, max_feats, start, rc;
> + struct cxl_dev_state *cxlds = &mds->cxlds;
> + struct cxl_mailbox *cxl_mbox = &cxlds->cxl_mbox;
> + int feat_size = sizeof(struct cxl_feat_entry);
> + struct cxl_mbox_get_sup_feats_out *mbox_out;
> + struct cxl_mbox_get_sup_feats_in mbox_in;
> + int hdr_size = sizeof(*mbox_out);
> + struct cxl_mbox_cmd mbox_cmd;
> + struct cxl_mem_command *cmd;
> + void *ptr;
> +
> + /* Get supported features is optional, need to check */
> + cmd = cxl_mem_find_command(CXL_MBOX_OP_GET_SUPPORTED_FEATURES);
> + if (!cmd)
> + return -EOPNOTSUPP;
> + if (!test_bit(cmd->info.id, mds->enabled_cmds))
> + return -EOPNOTSUPP;
> +
> + rc = cxl_get_supported_features_count(cxlds);
> + if (rc)
> + return rc;
> +
> + struct cxl_feat_entry *entries __free(kvfree) =
> + kvmalloc(cxl_mbox->num_features * feat_size, GFP_KERNEL);
> +
> + if (!entries)
> + return -ENOMEM;
> +
> + cxl_mbox->entries = no_free_ptr(entries);
> + rc = devm_add_action_or_reset(cxl_mbox->host, cxl_free_features,
> + cxl_mbox->entries);
> + if (rc)
> + return rc;
> +
> + max_size = cxl_mbox->payload_size - hdr_size;
> + /* max feat entries that can fit in mailbox max payload size */
> + max_feats = max_size / feat_size;
> + ptr = &cxl_mbox->entries[0];
> +
> + mbox_out = kvmalloc(cxl_mbox->payload_size, GFP_KERNEL);
> + if (!mbox_out)
> + return -ENOMEM;
> +
> + start = 0;
> + remain_feats = cxl_mbox->num_features;
> + do {
> + int retrieved, alloc_size, copy_feats;
+ int num_entries;
> +
> + if (remain_feats > max_feats) {
> + alloc_size = sizeof(*mbox_out) + max_feats * feat_size;
> + remain_feats = remain_feats - max_feats;
> + copy_feats = max_feats;
> + } else {
> + alloc_size = sizeof(*mbox_out) + remain_feats * feat_size;
> + copy_feats = remain_feats;
> + remain_feats = 0;
> + }
> +
> + memset(&mbox_in, 0, sizeof(mbox_in));
> + mbox_in.count = alloc_size;
> + mbox_in.start_idx = start;
mbox_in.count = cpu_to_le32(alloc_size);
mbox_in.start_idx = cpu_to_le16(start);
> + memset(mbox_out, 0, alloc_size);
> + mbox_cmd = (struct cxl_mbox_cmd) {
> + .opcode = CXL_MBOX_OP_GET_SUPPORTED_FEATURES,
> + .size_in = sizeof(mbox_in),
> + .payload_in = &mbox_in,
> + .size_out = alloc_size,
> + .payload_out = mbox_out,
> + .min_out = hdr_size,
> + };
> + rc = cxl_internal_send_cmd(cxl_mbox, &mbox_cmd);
> + if (rc < 0)
> + goto err;
> + if (mbox_cmd.size_out <= hdr_size) {
> + rc = -ENXIO;
> + goto err;
> + }
> +
> + /*
> + * Make sure retrieved out buffer is multiple of feature
> + * entries.
> + */
> + retrieved = mbox_cmd.size_out - hdr_size;
> + if (retrieved % feat_size) {
> + rc = -ENXIO;
> + goto err;
> + }
> +
+ num_entries = le16_to_cpu(mbox_out->num_entries);
> + /*
> + * If the reported output entries * defined entry size !=
> + * retrieved output bytes, then the output package is incorrect.
> + */
> + if (mbox_out->num_entries * feat_size != retrieved) {
if (num_entries * feat_size != retrieved) {
> + rc = -ENXIO;
> + goto err;
> + }
> +
> + memcpy(ptr, mbox_out->ents, retrieved);
> + ptr += retrieved;
> + /*
> + * If the number of output entries is less than expected, add the
> + * remaining entries to the next batch.
> + */
> + remain_feats += copy_feats - mbox_out->num_entries;
> + start += mbox_out->num_entries;
remain_feat += copy_feats - num_entries;
start += num_entries;
> + } while (remain_feats);
> +
> + kfree(mbox_out);
> + return 0;
> +
> +err:
> + kfree(mbox_out);
> + cxl_mbox->num_features = 0;
> + return rc;
> +}
> +EXPORT_SYMBOL_NS_GPL(cxl_get_supported_features, CXL);
> +
> +int cxl_get_supported_feature_entry(struct cxl_memdev_state *mds, const uuid_t *feat_uuid,
> + struct cxl_feat_entry *feat_entry_out)
> +{
> + struct cxl_dev_state *cxlds = &mds->cxlds;
> + struct cxl_feat_entry *feat_entry;
> + int count;
> +
> + /* Check CXL dev supports the feature */
> + feat_entry = &cxlds->cxl_mbox.entries[0];
> + for (count = 0; count < cxlds->cxl_mbox.num_features; count++, feat_entry++) {
> + if (uuid_equal(&feat_entry->uuid, feat_uuid)) {
> + memcpy(feat_entry_out, feat_entry, sizeof(*feat_entry_out));
> + return 0;
> + }
> + }
> +
> + return -EOPNOTSUPP;
> +}
> +EXPORT_SYMBOL_NS_GPL(cxl_get_supported_feature_entry, CXL);
> +
> /**
> * cxl_enumerate_cmds() - Enumerate commands for a device.
> * @mds: The driver data for the operation
> diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
> index 2a25d1957ddb..f88b10188632 100644
> --- a/drivers/cxl/cxlmem.h
> +++ b/drivers/cxl/cxlmem.h
> @@ -530,6 +530,7 @@ enum cxl_opcode {
> CXL_MBOX_OP_GET_LOG_CAPS = 0x0402,
> CXL_MBOX_OP_CLEAR_LOG = 0x0403,
> CXL_MBOX_OP_GET_SUP_LOG_SUBLIST = 0x0405,
> + CXL_MBOX_OP_GET_SUPPORTED_FEATURES = 0x0500,
> CXL_MBOX_OP_IDENTIFY = 0x4000,
> CXL_MBOX_OP_GET_PARTITION_INFO = 0x4100,
> CXL_MBOX_OP_SET_PARTITION_INFO = 0x4101,
> @@ -813,6 +814,48 @@ enum {
> CXL_PMEM_SEC_PASS_USER,
> };
>
> +/* Get Supported Features (0x500h) CXL r3.1 8.2.9.6.1 */
> +struct cxl_mbox_get_sup_feats_in {
> + __le32 count;
> + __le16 start_idx;
> + u8 reserved[2];
> +} __packed;
> +
> +/* Supported Feature Entry : Payload out attribute flags */
> +#define CXL_FEAT_ENTRY_FLAG_CHANGABLE BIT(0)
> +#define CXL_FEAT_ENTRY_FLAG_DEEPEST_RESET_PERSISTENCE_MASK GENMASK(3, 1)
> +#define CXL_FEAT_ENTRY_FLAG_PERSIST_ACROSS_FIRMWARE_UPDATE BIT(4)
> +#define CXL_FEAT_ENTRY_FLAG_SUPPORT_DEFAULT_SELECTION BIT(5)
> +#define CXL_FEAT_ENTRY_FLAG_SUPPORT_SAVED_SELECTION BIT(6)
> +
> +enum cxl_feat_attr_value_persistence {
> + CXL_FEAT_ATTR_VALUE_PERSISTENCE_NONE,
> + CXL_FEAT_ATTR_VALUE_PERSISTENCE_CXL_RESET,
> + CXL_FEAT_ATTR_VALUE_PERSISTENCE_HOT_RESET,
> + CXL_FEAT_ATTR_VALUE_PERSISTENCE_WARM_RESET,
> + CXL_FEAT_ATTR_VALUE_PERSISTENCE_COLD_RESET,
> + CXL_FEAT_ATTR_VALUE_PERSISTENCE_MAX
> +};
> +
> +struct cxl_feat_entry {
> + uuid_t uuid;
> + __le16 id;
> + __le16 get_feat_size;
> + __le16 set_feat_size;
> + __le32 attr_flags;
> + u8 get_feat_ver;
> + u8 set_feat_ver;
> + __le16 set_effects;
> + u8 reserved[18];
> +} __packed;
> +
> +struct cxl_mbox_get_sup_feats_out {
> + __le16 num_entries;
> + __le16 supported_feats;
> + u8 reserved[4];
> + struct cxl_feat_entry ents[] __counted_by_le(supported_feats);
> +} __packed;
> +
> int cxl_internal_send_cmd(struct cxl_mailbox *cxl_mbox,
> struct cxl_mbox_cmd *cmd);
> int cxl_dev_state_identify(struct cxl_memdev_state *mds);
> @@ -872,4 +915,8 @@ struct cxl_hdm {
> struct seq_file;
> struct dentry *cxl_debugfs_create_dir(const char *dir);
> void cxl_dpa_debug(struct seq_file *file, struct cxl_dev_state *cxlds);
> +
> +int cxl_get_supported_features(struct cxl_memdev_state *mds);
> +int cxl_get_supported_feature_entry(struct cxl_memdev_state *mds, const uuid_t *feat_uuid,
> + struct cxl_feat_entry *feat_entry_out);
> #endif /* __CXL_MEM_H__ */
> diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
> index 188412d45e0d..5c2926eec3c3 100644
> --- a/drivers/cxl/pci.c
> +++ b/drivers/cxl/pci.c
> @@ -887,6 +887,10 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> if (rc)
> return rc;
>
> + rc = cxl_get_supported_features(mds);
> + if (rc)
> + dev_dbg(&pdev->dev, "No features enumerated.\n");
> +
> rc = cxl_set_timestamp(mds);
> if (rc)
> return rc;
> diff --git a/include/cxl/mailbox.h b/include/cxl/mailbox.h
> index bacd111e75f1..cc66afec3473 100644
> --- a/include/cxl/mailbox.h
> +++ b/include/cxl/mailbox.h
> @@ -14,6 +14,8 @@ struct cxl_mbox_cmd;
> * @mbox_mutex: mutex protects device mailbox and firmware
> * @mbox_wait: rcuwait for mailbox
> * @mbox_send: @dev specific transport for transmitting mailbox commands
> + * @num_features: number of supported features
> + * @entries: list of supported feature entries.
> */
> struct cxl_mailbox {
> struct device *host;
> @@ -21,6 +23,8 @@ struct cxl_mailbox {
> struct mutex mbox_mutex; /* lock to protect mailbox context */
> struct rcuwait mbox_wait;
> int (*mbox_send)(struct cxl_mailbox *cxl_mbox, struct cxl_mbox_cmd *cmd);
> + int num_features;
> + struct cxl_feat_entry *entries;
> };
>
> int cxl_mailbox_init(struct cxl_mailbox *cxl_mbox, struct device *host);
> diff --git a/include/uapi/linux/cxl_mem.h b/include/uapi/linux/cxl_mem.h
> index c6c0fe27495d..bd2535962f70 100644
> --- a/include/uapi/linux/cxl_mem.h
> +++ b/include/uapi/linux/cxl_mem.h
> @@ -50,6 +50,7 @@
> ___C(GET_LOG_CAPS, "Get Log Capabilities"), \
> ___C(CLEAR_LOG, "Clear Log"), \
> ___C(GET_SUP_LOG_SUBLIST, "Get Supported Logs Sub-List"), \
> + ___C(GET_SUPPORTED_FEATURES, "Get Supported Features"), \
> ___C(MAX, "invalid / last command")
>
> #define ___C(a, b) CXL_MEM_COMMAND_ID_##a
next prev parent reply other threads:[~2024-11-06 23:35 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-01 9:17 [PATCH v15 00/15] EDAC: Scrub: introduce generic EDAC RAS control feature driver + CXL/ACPI-RAS2 drivers shiju.jose
2024-11-01 9:17 ` [PATCH v15 01/15] EDAC: Add support for EDAC device features control shiju.jose
2024-11-08 0:17 ` Fan Ni
2024-11-01 9:17 ` [PATCH v15 02/15] EDAC: Add scrub control feature shiju.jose
2024-11-08 0:36 ` Fan Ni
2024-11-08 13:47 ` Shiju Jose
2024-11-01 9:17 ` [PATCH v15 03/15] EDAC: Add ECS " shiju.jose
2024-11-01 9:17 ` [PATCH v15 04/15] cxl: Add Get Supported Features command for kernel usage shiju.jose
2024-11-06 23:34 ` Dave Jiang [this message]
2024-11-08 13:33 ` Shiju Jose
2024-11-01 9:17 ` [PATCH v15 05/15] cxl/mbox: Add GET_FEATURE mailbox command shiju.jose
2024-11-01 9:17 ` [PATCH v15 06/15] cxl/mbox: Add SET_FEATURE " shiju.jose
2024-11-01 9:17 ` [PATCH v15 07/15] cxl/memfeature: Add CXL memory device patrol scrub control feature shiju.jose
2024-11-04 18:16 ` Dave Jiang
2024-11-01 9:17 ` [PATCH v15 08/15] cxl/memfeature: Add CXL memory device ECS " shiju.jose
2024-11-04 18:30 ` Dave Jiang
2024-11-05 9:51 ` Shiju Jose
2024-11-01 9:17 ` [PATCH v15 09/15] ACPI:RAS2: Add ACPI RAS2 driver shiju.jose
2024-11-13 11:56 ` Rafael J. Wysocki
2024-11-01 9:17 ` [PATCH v15 10/15] ras: mem: Add memory " shiju.jose
2024-11-01 9:17 ` [PATCH v15 11/15] EDAC: Add memory repair control feature shiju.jose
2024-11-04 6:15 ` Borislav Petkov
2024-11-04 13:05 ` Shiju Jose
2024-11-11 11:28 ` Borislav Petkov
2024-11-11 16:54 ` Shiju Jose
2024-11-14 13:32 ` Borislav Petkov
2024-11-15 12:14 ` Jonathan Cameron
2024-11-19 12:32 ` Borislav Petkov
2024-11-15 12:21 ` Shiju Jose
2024-11-19 12:36 ` Borislav Petkov
2024-11-08 16:59 ` Fan Ni
2024-11-11 17:01 ` Shiju Jose
2024-11-01 9:17 ` [PATCH v15 12/15] cxl/mbox: Add support for PERFORM_MAINTENANCE mailbox command shiju.jose
2024-11-05 17:22 ` Dave Jiang
2024-11-01 9:17 ` [PATCH v15 13/15] cxl/memfeature: Add CXL memory device sPPR control feature shiju.jose
2024-11-05 20:32 ` Dave Jiang
2024-11-06 17:28 ` Shiju Jose
2024-11-01 9:17 ` [PATCH v15 14/15] cxl/memfeature: Add CXL memory device memory sparing " shiju.jose
2024-11-07 16:24 ` Dave Jiang
2024-11-08 13:44 ` Shiju Jose
2024-11-01 9:17 ` [PATCH v15 15/15] EDAC: Add documentation for RAS feature control shiju.jose
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49228a3c-23b0-4aac-9c7f-e605045e3c8f@intel.com \
--to=dave.jiang@intel.com \
--cc=Jon.Grimm@amd.com \
--cc=Vilas.Sridharan@amd.com \
--cc=Yazen.Ghannam@amd.com \
--cc=alison.schofield@intel.com \
--cc=bp@alien8.de \
--cc=dan.j.williams@intel.com \
--cc=dave.hansen@linux.intel.com \
--cc=dave@stgolabs.net \
--cc=david@redhat.com \
--cc=dferguson@amperecomputing.com \
--cc=duenwen@google.com \
--cc=erdemaktas@google.com \
--cc=gregkh@linuxfoundation.org \
--cc=gthelen@google.com \
--cc=ira.weiny@intel.com \
--cc=james.morse@arm.com \
--cc=jassisinghbrar@gmail.com \
--cc=jiaqiyan@google.com \
--cc=jonathan.cameron@huawei.com \
--cc=jthoughton@google.com \
--cc=kangkang.shen@futurewei.com \
--cc=lenb@kernel.org \
--cc=leo.duran@amd.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-edac@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linuxarm@huawei.com \
--cc=mchehab@kernel.org \
--cc=naoya.horiguchi@nec.com \
--cc=nifan.cxl@gmail.com \
--cc=pgonda@google.com \
--cc=prime.zeng@hisilicon.com \
--cc=rafael@kernel.org \
--cc=rientjes@google.com \
--cc=roberto.sassu@huawei.com \
--cc=shiju.jose@huawei.com \
--cc=somasundaram.a@hpe.com \
--cc=sudeep.holla@arm.com \
--cc=tanxiaofei@huawei.com \
--cc=tony.luck@intel.com \
--cc=vishal.l.verma@intel.com \
--cc=wanghuiqiang@huawei.com \
--cc=wbs@os.amperecomputing.com \
--cc=wschwartz@amperecomputing.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox