From: Balbir Singh <balbir@linux.vnet.ibm.com>
To: Dave Hansen <haveblue@us.ibm.com>
Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>,
Andrew Morton <akpm@linux-foundation.org>,
Pavel Emelianov <xemul@openvz.org>,
Peter Zijlstra <a.p.zijlstra@chello.nl>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Linux MM Mailing List <linux-mm@kvack.org>,
Eric W Biederman <ebiederm@xmission.com>,
Linux Containers <containers@lists.osdl.org>,
Paul Menage <menage@google.com>
Subject: Re: [-mm PATCH 1/8] Memory controller resource counters (v2)
Date: Fri, 06 Jul 2007 14:03:58 -0700 [thread overview]
Message-ID: <468EAE3E.4050802@linux.vnet.ibm.com> (raw)
In-Reply-To: <1183742642.10287.151.camel@localhost>
Dave Hansen wrote:
> On Thu, 2007-07-05 at 22:20 -0700, Balbir Singh wrote:
>> +/*
>> + * the core object. the container that wishes to account for some
>> + * resource may include this counter into its structures and use
>> + * the helpers described beyond
>> + */
>
> I'm going to nitpick a bit here. Nothing major, I promise. ;)
>
> Could we make these comments into nice sentences with capitalization? I
> think it makes them easier to read in long comments.
>
> How about something like this for the comment:
>
> /*
> * A container wishing to account for a resource should include this
> * structure into one of its own. It may use the helpers below.
> */
>
> The one above is worded a little bit strangely.
>
Hi, Dave,
These patches were posted by Pavel, I've carried them forward as is.
Suggestions are always welcome.
>> +struct res_counter {
>> + /*
>> + * the current resource consumption level
>> + */
>> + unsigned long usage;
>> + /*
>> + * the limit that usage cannot exceed
>> + */
>> + unsigned long limit;
>> + /*
>> + * the number of insuccessful attempts to consume the resource
>> + */
>
> unsuccessful
>
Thanks, fixed.
>> + unsigned long failcnt;
>> + /*
>> + * the lock to protect all of the above.
>> + * the routines below consider this to be IRQ-safe
>> + */
>> + spinlock_t lock;
>> +};
>
> Do we really need all of these comments? Some of them are a wee bit
> self-explanatory. I think we mostly know what a limit is. ;)
>
I'll leave the decision on the comments exclusion to Pavel.
>
> More nitpicking...
>
> Can we leave the normal control flow in the lowest indentation level,
> and have only errors in the indented if(){} blocks? Something like
> this:
>
Sounds good, done!
>> +int res_counter_charge_locked(struct res_counter *cnt, unsigned long
> val)
>> +{
>> + if (cnt->usage > cnt->limit - val) {
>> + cnt->failcnt++;
>> + return -ENOMEM;
>> + }
>> + cnt->usage += val;
>> + return 0;
>> +}
>
> Also, can you do my poor brain a favor an expand "cnt" to "counter"?
> You're not saving _that_ much typing ;)
>
Done
>> +int res_counter_charge(struct res_counter *cnt, unsigned long val)
>> +{
>> + int ret;
>> + unsigned long flags;
>> +
>> + spin_lock_irqsave(&cnt->lock, flags);
>> + ret = res_counter_charge_locked(cnt, val);
>> + spin_unlock_irqrestore(&cnt->lock, flags);
>> + return ret;
>> +}
>> +
>> +void res_counter_uncharge_locked(struct res_counter *cnt, unsigned long val)
>> +{
>> + if (unlikely(cnt->usage < val)) {
>> + WARN_ON(1);
>> + val = cnt->usage;
>> + }
>> +
>> + cnt->usage -= val;
>> +}
>
> It actually looks like the WARN_ON() macros "return" values. You should
> be able to:
>
> if (WARN_ON(cnt->usage < val))
> val = count->usage;
>
I think, thats better, will change it
>> +void res_counter_uncharge(struct res_counter *cnt, unsigned long val)
>> +{
>> + unsigned long flags;
>> +
>> + spin_lock_irqsave(&cnt->lock, flags);
>> + res_counter_uncharge_locked(cnt, val);
>> + spin_unlock_irqrestore(&cnt->lock, flags);
>> +}
>> +
>> +
>> +static inline unsigned long *res_counter_member(struct res_counter *cnt, int member)
>> +{
>> + switch (member) {
>> + case RES_USAGE:
>> + return &cnt->usage;
>> + case RES_LIMIT:
>> + return &cnt->limit;
>> + case RES_FAILCNT:
>> + return &cnt->failcnt;
>> + };
>> +
>> + BUG();
>> + return NULL;
>> +}
>>
>> +ssize_t res_counter_read(struct res_counter *cnt, int member,
>> + const char __user *userbuf, size_t nbytes, loff_t *pos)
>> +{
>> + unsigned long *val;
>> + char buf[64], *s;
>> +
>> + s = buf;
>> + val = res_counter_member(cnt, member);
>> + s += sprintf(s, "%lu\n", *val);
>> + return simple_read_from_buffer((void __user *)userbuf, nbytes,
>> + pos, buf, s - buf);
>> +}
>
> Why do we need that cast?
>
u mean the __user? If I remember correctly it's a attribute for sparse.
>> +ssize_t res_counter_write(struct res_counter *cnt, int member,
>> + const char __user *userbuf, size_t nbytes, loff_t *pos)
>> +{
>> + int ret;
>> + char *buf, *end;
>> + unsigned long tmp, *val;
>> +
>> + buf = kmalloc(nbytes + 1, GFP_KERNEL);
>
> Do we need some checking on nbytes? Is it sanitized before it gets
> here?
>
I think the container infrastructure should handle that.
>> + ret = -ENOMEM;
>> + if (buf == NULL)
>> + goto out;
>> +
>> + buf[nbytes] = 0;
>
> Please use '\0'. 0 isn't a char.
>
Yep, will do.
>> + ret = -EFAULT;
>> + if (copy_from_user(buf, userbuf, nbytes))
>> + goto out_free;
>> +
>> + ret = -EINVAL;
>> + tmp = simple_strtoul(buf, &end, 10);
>> + if (*end != '\0')
>> + goto out_free;
>> +
>> + val = res_counter_member(cnt, member);
>> + *val = tmp;
>> + ret = nbytes;
>> +out_free:
>> + kfree(buf);
>> +out:
>> + return ret;
>> +}
>> _
>>
> -- Dave
>
--
Thanks,
Balbir Singh
Linux Technology Center
IBM, ISTL
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2007-07-06 21:05 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-07-06 5:20 [-mm PATCH 0/8] Memory controller introduction (v2) Balbir Singh
2007-07-06 5:20 ` [-mm PATCH 1/8] Memory controller resource counters (v2) Balbir Singh
2007-07-06 17:24 ` Dave Hansen
2007-07-06 21:03 ` Balbir Singh [this message]
2007-07-06 21:10 ` Dave Hansen
2007-07-06 21:24 ` Balbir Singh
2007-07-09 7:16 ` Pavel Emelianov
2007-07-09 19:56 ` Dave Hansen
2007-07-06 5:21 ` [-mm PATCH 2/8] Memory controller containers setup (v2) Balbir Singh
2007-07-06 17:30 ` Dave Hansen
2007-07-06 21:07 ` Balbir Singh
2007-07-06 5:21 ` [-mm PATCH 3/8] Memory controller accounting " Balbir Singh
2007-07-06 5:21 ` [-mm PATCH 4/8] Memory controller memory accounting (v2) Balbir Singh
2007-07-10 7:26 ` YAMAMOTO Takashi
2007-07-10 8:41 ` Balbir Singh
2007-07-10 8:44 ` YAMAMOTO Takashi
2007-07-10 15:42 ` Balbir Singh
2007-07-06 5:21 ` [-mm PATCH 5/8] Memory controller task migration (v2) Balbir Singh
2007-07-06 5:22 ` [-mm PATCH 6/8] Memory controller add per container LRU and reclaim (v2) Balbir Singh
2007-07-06 7:05 ` Balbir Singh
2007-07-10 8:41 ` YAMAMOTO Takashi
2007-07-10 15:38 ` Balbir Singh
2007-07-06 5:22 ` [-mm PATCH 7/8] Memory controller OOM handling (v2) Balbir Singh
2007-07-06 5:22 ` [-mm PATCH 8/8] Add switch to control what type of pages to limit (v2) Balbir Singh
2007-07-06 5:55 ` [-mm PATCH 0/8] Memory controller introduction (v2) Balbir Singh
2007-07-06 7:09 ` Balbir Singh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=468EAE3E.4050802@linux.vnet.ibm.com \
--to=balbir@linux.vnet.ibm.com \
--cc=a.p.zijlstra@chello.nl \
--cc=akpm@linux-foundation.org \
--cc=containers@lists.osdl.org \
--cc=ebiederm@xmission.com \
--cc=haveblue@us.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=menage@google.com \
--cc=svaidy@linux.vnet.ibm.com \
--cc=xemul@openvz.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox