From: Daniel Phillips <phillips@google.com>
To: Rik van Riel <riel@redhat.com>
Cc: Thomas Graf <tgraf@suug.ch>,
Peter Zijlstra <a.p.zijlstra@chello.nl>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org,
netdev@vger.kernel.org
Subject: Re: [RFC][PATCH 2/9] deadlock prevention core
Date: Sun, 13 Aug 2006 15:05:25 -0700 [thread overview]
Message-ID: <44DFA225.1020508@google.com> (raw)
In-Reply-To: <44DBED4C.6040604@redhat.com>
Rik van Riel wrote:
> Thomas Graf wrote:
>> skb->dev is not guaranteed to still point to the "allocating" device
>> once the skb is freed again so reserve/unreserve isn't symmetric.
>> You'd need skb->alloc_dev or something.
>
> There's another consequence of this property of the network
> stack.
>
> Every network interface must be able to fall back to these
> MEMALLOC allocations, because the memory critical socket
> could be on another network interface. Hence, we cannot
> know which network interfaces should (not) be marked MEMALLOC.
Good point. We do however know which interfaces should be marked
capable of carrying block IO traffic: the ones that have been fixed,
audited and tested. We might then allow the network block device to
specify which interface(s) will actually carry the traffic.
The advantage of being specific about which devices are carrying at
least one block io socket is, we can skip the reserve accounting for
the other interfaces. But is the extra layer of configuration gack a
better idea than just doing the accounting for every device, provided
the system is in reclaim?
By the way, another way to avoid impact on the normal case is an
experimental option such as CONFIG_PREVENT_NETWORK_BLOCKIO_DEADLOCK.
Regards,
Daniel
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2006-08-13 22:05 UTC|newest]
Thread overview: 140+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-08-08 19:33 [RFC][PATCH 0/9] Network receive deadlock prevention for NBD Peter Zijlstra
2006-08-08 19:33 ` [RFC][PATCH 1/9] pfn_to_kaddr() for UML Peter Zijlstra
2006-08-08 19:33 ` [RFC][PATCH 2/9] deadlock prevention core Peter Zijlstra
2006-08-08 20:57 ` Stephen Hemminger
2006-08-08 21:05 ` Peter Zijlstra
2006-08-09 1:33 ` Daniel Phillips
2006-08-09 1:38 ` David Miller, Daniel Phillips
2006-08-08 21:17 ` Thomas Graf
2006-08-09 1:34 ` Daniel Phillips
2006-08-09 1:39 ` David Miller, Daniel Phillips
2006-08-09 5:47 ` Daniel Phillips
2006-08-09 13:19 ` Thomas Graf
2006-08-09 14:07 ` Peter Zijlstra
2006-08-09 16:18 ` Thomas Graf
2006-08-09 16:19 ` Peter Zijlstra
2006-08-10 0:01 ` David Miller, Peter Zijlstra
2006-08-09 23:58 ` David Miller, Peter Zijlstra
2006-08-10 6:25 ` Peter Zijlstra
2006-08-11 4:24 ` Stephen Hemminger
2006-08-13 21:22 ` Daniel Phillips
2006-08-13 23:49 ` David Miller, Daniel Phillips
2006-08-14 1:15 ` Daniel Phillips
2006-08-11 2:37 ` Rik van Riel
2006-08-13 22:05 ` Daniel Phillips [this message]
2006-08-13 23:55 ` David Miller, Daniel Phillips
2006-08-14 1:31 ` Daniel Phillips
2006-08-14 1:53 ` Andrew Morton
2006-08-14 4:40 ` Peter Zijlstra
2006-08-14 4:58 ` Andrew Morton
2006-08-14 5:03 ` Peter Zijlstra
2006-08-14 5:22 ` Andrew Morton
2006-08-14 6:45 ` Peter Zijlstra
2006-08-14 7:07 ` Andrew Morton
2006-08-14 8:15 ` Peter Zijlstra
2006-08-14 8:25 ` Evgeniy Polyakov
2006-08-14 8:35 ` Peter Zijlstra
2006-08-14 8:33 ` David Miller, Andrew Morton
2006-08-17 4:27 ` Daniel Phillips
2006-08-14 7:17 ` Neil Brown
2006-08-14 7:31 ` Evgeniy Polyakov
2006-08-17 3:58 ` Daniel Phillips
2006-08-17 5:57 ` Andrew Morton
2006-08-17 23:53 ` Daniel Phillips
2006-08-18 0:24 ` Rik van Riel
2006-08-18 0:35 ` Daniel Phillips
2006-08-18 1:14 ` Neil Brown
2006-08-18 6:05 ` Andrew Morton
2006-08-18 21:22 ` Daniel Phillips
2006-08-18 22:34 ` Andrew Morton
2006-08-18 23:44 ` Daniel Phillips
2006-08-19 2:44 ` Andrew Morton
2006-08-19 4:14 ` Network receive stall avoidance (was [PATCH 2/9] deadlock prevention core) Daniel Phillips
2006-08-19 7:28 ` Andrew Morton
2006-08-19 15:06 ` [RFC][PATCH 2/9] deadlock prevention core Rik van Riel
2006-08-20 1:33 ` Andre Tomt
2006-08-19 16:53 ` Ray Lee
2006-08-21 13:27 ` Philip R. Auld
2006-08-25 10:47 ` Pavel Machek
2006-08-21 13:38 ` Jens Axboe
2006-08-08 22:10 ` David Miller
2006-08-09 1:35 ` Daniel Phillips
2006-08-09 1:41 ` David Miller, Daniel Phillips
2006-08-09 5:44 ` Daniel Phillips
2006-08-09 7:00 ` Peter Zijlstra
[not found] ` <42414.81.207.0.53.1155080443.squirrel@81.207.0.53>
2006-08-09 0:25 ` Daniel Phillips
2006-08-09 12:02 ` Indan Zupancic
2006-08-09 12:54 ` Peter Zijlstra
2006-08-09 13:48 ` Indan Zupancic
2006-08-09 14:00 ` Peter Zijlstra
2006-08-09 18:34 ` Indan Zupancic
2006-08-09 19:45 ` Peter Zijlstra
2006-08-09 20:19 ` Peter Zijlstra
2006-08-10 1:21 ` Indan Zupancic
2006-08-09 16:05 ` -v2 " Peter Zijlstra
2006-08-08 19:33 ` [RFC][PATCH 3/9] e1000 driver conversion Peter Zijlstra
2006-08-08 20:50 ` Auke Kok
2006-08-08 20:59 ` Peter Zijlstra
2006-08-08 22:32 ` David Miller, Auke Kok
2006-08-08 22:42 ` Auke Kok
2006-08-08 19:34 ` [RFC][PATCH 4/9] e100 " Peter Zijlstra
2006-08-08 20:13 ` Auke Kok
2006-08-08 20:18 ` Peter Zijlstra
2006-08-08 19:34 ` [RFC][PATCH 5/9] r8169 " Peter Zijlstra
2006-08-08 19:34 ` [RFC][PATCH 6/9] tg3 " Peter Zijlstra
2006-08-08 19:34 ` [RFC][PATCH 7/9] UML eth " Peter Zijlstra
2006-08-08 19:34 ` [RFC][PATCH 8/9] 3c59x " Peter Zijlstra
2006-08-08 23:07 ` Jeff Garzik
2006-08-09 5:51 ` Daniel Phillips
2006-08-09 5:55 ` David Miller, Daniel Phillips
2006-08-09 6:30 ` Jeff Garzik
2006-08-09 7:03 ` Peter Zijlstra
2006-08-09 7:20 ` Jeff Garzik
2006-08-13 19:38 ` Daniel Phillips
2006-08-13 19:53 ` Jeff Garzik
2006-08-08 19:34 ` [RFC][PATCH 9/9] deadlock prevention for NBD Peter Zijlstra
2006-08-09 5:46 ` [RFC][PATCH 0/9] Network receive " Evgeniy Polyakov
2006-08-09 5:52 ` Daniel Phillips
2006-08-09 5:56 ` David Miller, Daniel Phillips
2006-08-09 5:53 ` David Miller, Evgeniy Polyakov
2006-08-09 5:55 ` Evgeniy Polyakov
2006-08-09 12:37 ` Peter Zijlstra
2006-08-09 13:07 ` Evgeniy Polyakov
2006-08-09 13:32 ` Peter Zijlstra
2006-08-09 19:29 ` Evgeniy Polyakov
2006-08-09 23:54 ` David Miller, Peter Zijlstra
2006-08-10 6:06 ` Peter Zijlstra
2006-08-13 20:16 ` Daniel Phillips
2006-08-14 5:13 ` Evgeniy Polyakov
2006-08-14 6:45 ` Peter Zijlstra
2006-08-14 6:54 ` Evgeniy Polyakov
2006-08-17 4:49 ` Daniel Phillips
2006-08-17 4:48 ` Daniel Phillips
2006-08-17 5:36 ` Evgeniy Polyakov
2006-08-17 18:01 ` Daniel Phillips
2006-08-17 18:42 ` Evgeniy Polyakov
2006-08-17 19:15 ` Peter Zijlstra
2006-08-17 19:48 ` Evgeniy Polyakov
2006-08-17 23:24 ` Daniel Phillips
2006-08-18 7:16 ` Evgeniy Polyakov
2006-08-12 3:42 ` Rik van Riel
2006-08-12 8:47 ` Evgeniy Polyakov
2006-08-12 9:19 ` Peter Zijlstra
2006-08-12 9:37 ` Evgeniy Polyakov
2006-08-12 10:18 ` Peter Zijlstra
2006-08-12 10:42 ` Evgeniy Polyakov
2006-08-12 10:51 ` Evgeniy Polyakov
2006-08-12 11:40 ` Peter Zijlstra
2006-08-12 11:53 ` Evgeniy Polyakov
2006-08-13 0:46 ` David Miller, Peter Zijlstra
2006-08-13 1:11 ` Rik van Riel
2006-08-12 14:40 ` Rik van Riel
2006-08-12 14:49 ` Evgeniy Polyakov
2006-08-12 14:56 ` Rik van Riel
2006-08-12 15:08 ` Evgeniy Polyakov
2006-08-12 15:22 ` Peter Zijlstra
2006-08-14 0:56 ` Daniel Phillips
2006-08-13 0:46 ` David Miller, Evgeniy Polyakov
2006-08-13 9:06 ` Evgeniy Polyakov
2006-08-13 9:52 ` Evgeniy Polyakov
2006-08-15 19:17 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=44DFA225.1020508@google.com \
--to=phillips@google.com \
--cc=a.p.zijlstra@chello.nl \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=netdev@vger.kernel.org \
--cc=riel@redhat.com \
--cc=tgraf@suug.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox