linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Christophe Leroy <christophe.leroy@csgroup.eu>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>,
	linux-kernel@vger.kernel.org, linux-mm@kvack.org,
	linuxppc-dev@lists.ozlabs.org,
	Steve Capper <steve.capper@arm.com>,
	Will Deacon <will.deacon@arm.com>,
	Catalin Marinas <catalin.marinas@arm.com>,
	stable@vger.kernel.org
Subject: [PATCH v9 4/4] mm, hugetlbfs: Allow for "high" userspace addresses
Date: Fri,  8 Apr 2022 09:25:02 +0200	[thread overview]
Message-ID: <3bb944642140841c065f1cd6eae73f084fc026d2.1649401201.git.christophe.leroy@csgroup.eu> (raw)
In-Reply-To: <cover.1649401201.git.christophe.leroy@csgroup.eu>

This is a complement of f6795053dac8 ("mm: mmap: Allow for "high"
userspace addresses") for hugetlb.

This patch adds support for "high" userspace addresses that are
optionally supported on the system and have to be requested via a hint
mechanism ("high" addr parameter to mmap).

Architectures such as powerpc and x86 achieve this by making changes to
their architectural versions of hugetlb_get_unmapped_area() function.
However, arm64 uses the generic version of that function.

So take into account arch_get_mmap_base() and arch_get_mmap_end() in
hugetlb_get_unmapped_area(). To allow that, move those two macros
out of mm/mmap.c into include/linux/sched/mm.h

If these macros are not defined in architectural code then they default
to (TASK_SIZE) and (base) so should not introduce any behavioural
changes to architectures that do not define them.

For the time being, only ARM64 is affected by this change.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Fixes: f6795053dac8 ("mm: mmap: Allow for "high" userspace addresses")
Cc: <stable@vger.kernel.org> # 5.0.x
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
---
 fs/hugetlbfs/inode.c     | 9 +++++----
 include/linux/sched/mm.h | 8 ++++++++
 mm/mmap.c                | 8 --------
 3 files changed, 13 insertions(+), 12 deletions(-)

diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index 09c8313ee1c4..6f863497bd69 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -205,7 +205,7 @@ hugetlb_get_unmapped_area_bottomup(struct file *file, unsigned long addr,
 	info.flags = 0;
 	info.length = len;
 	info.low_limit = current->mm->mmap_base;
-	info.high_limit = TASK_SIZE;
+	info.high_limit = arch_get_mmap_end(addr, len, flags);
 	info.align_mask = PAGE_MASK & ~huge_page_mask(h);
 	info.align_offset = 0;
 	return vm_unmapped_area(&info);
@@ -221,7 +221,7 @@ hugetlb_get_unmapped_area_topdown(struct file *file, unsigned long addr,
 	info.flags = VM_UNMAPPED_AREA_TOPDOWN;
 	info.length = len;
 	info.low_limit = max(PAGE_SIZE, mmap_min_addr);
-	info.high_limit = current->mm->mmap_base;
+	info.high_limit = arch_get_mmap_base(addr, current->mm->mmap_base);
 	info.align_mask = PAGE_MASK & ~huge_page_mask(h);
 	info.align_offset = 0;
 	addr = vm_unmapped_area(&info);
@@ -236,7 +236,7 @@ hugetlb_get_unmapped_area_topdown(struct file *file, unsigned long addr,
 		VM_BUG_ON(addr != -ENOMEM);
 		info.flags = 0;
 		info.low_limit = current->mm->mmap_base;
-		info.high_limit = TASK_SIZE;
+		info.high_limit = arch_get_mmap_end(addr, len, flags);
 		addr = vm_unmapped_area(&info);
 	}
 
@@ -251,6 +251,7 @@ generic_hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 	struct mm_struct *mm = current->mm;
 	struct vm_area_struct *vma;
 	struct hstate *h = hstate_file(file);
+	const unsigned long mmap_end = arch_get_mmap_end(addr, len, flags);
 
 	if (len & ~huge_page_mask(h))
 		return -EINVAL;
@@ -266,7 +267,7 @@ generic_hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 	if (addr) {
 		addr = ALIGN(addr, huge_page_size(h));
 		vma = find_vma(mm, addr);
-		if (TASK_SIZE - len >= addr &&
+		if (mmap_end - len >= addr &&
 		    (!vma || addr + len <= vm_start_gap(vma)))
 			return addr;
 	}
diff --git a/include/linux/sched/mm.h b/include/linux/sched/mm.h
index 18b2d2b2e0ca..8cd975a8bfeb 100644
--- a/include/linux/sched/mm.h
+++ b/include/linux/sched/mm.h
@@ -136,6 +136,14 @@ static inline void mm_update_next_owner(struct mm_struct *mm)
 #endif /* CONFIG_MEMCG */
 
 #ifdef CONFIG_MMU
+#ifndef arch_get_mmap_end
+#define arch_get_mmap_end(addr, len, flags)	(TASK_SIZE)
+#endif
+
+#ifndef arch_get_mmap_base
+#define arch_get_mmap_base(addr, base) (base)
+#endif
+
 extern void arch_pick_mmap_layout(struct mm_struct *mm,
 				  struct rlimit *rlim_stack);
 extern unsigned long
diff --git a/mm/mmap.c b/mm/mmap.c
index 4d63e1cb3b52..e9b7d74e58bc 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -2117,14 +2117,6 @@ unsigned long vm_unmapped_area(struct vm_unmapped_area_info *info)
 	return addr;
 }
 
-#ifndef arch_get_mmap_end
-#define arch_get_mmap_end(addr, len, flags)	(TASK_SIZE)
-#endif
-
-#ifndef arch_get_mmap_base
-#define arch_get_mmap_base(addr, base) (base)
-#endif
-
 /* Get an address range which is currently unmapped.
  * For shmat() with addr=0.
  *
-- 
2.35.1



  parent reply	other threads:[~2022-04-08  7:25 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-08  7:24 [PATCH v9 0/4] mm: Enable conversion of powerpc to default topdown mmap layout Christophe Leroy
2022-04-08  7:24 ` [PATCH v9 1/4] mm: Allow arch specific arch_randomize_brk() with CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT Christophe Leroy
2022-04-08  7:25 ` [PATCH v9 2/4] mm, hugetlbfs: Allow an arch to always use generic versions of get_unmapped_area functions Christophe Leroy
2022-04-08  7:25 ` [PATCH v9 3/4] mm: Add len and flags parameters to arch_get_mmap_end() Christophe Leroy
2022-04-08  7:25 ` Christophe Leroy [this message]
2022-04-09  3:25 ` [PATCH v9 0/4] mm: Enable conversion of powerpc to default topdown mmap layout Andrew Morton
2022-04-09 10:16   ` Christophe Leroy
2022-04-09 12:45     ` Michael Ellerman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3bb944642140841c065f1cd6eae73f084fc026d2.1649401201.git.christophe.leroy@csgroup.eu \
    --to=christophe.leroy@csgroup.eu \
    --cc=akpm@linux-foundation.org \
    --cc=catalin.marinas@arm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=stable@vger.kernel.org \
    --cc=steve.capper@arm.com \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox