From: Kai Huang <kai.huang@intel.com>
To: linux-kernel@vger.kernel.org, kvm@vger.kernel.org
Cc: linux-mm@kvack.org, seanjc@google.com, pbonzini@redhat.com,
dave.hansen@intel.com, dan.j.williams@intel.com,
rafael.j.wysocki@intel.com, kirill.shutemov@linux.intel.com,
reinette.chatre@intel.com, len.brown@intel.com,
tony.luck@intel.com, peterz@infradead.org, ak@linux.intel.com,
isaku.yamahata@intel.com, chao.gao@intel.com,
sathyanarayanan.kuppuswamy@linux.intel.com, bagasdotme@gmail.com,
sagis@google.com, imammedo@redhat.com, kai.huang@intel.com
Subject: [PATCH v6 17/21] x86/virt/tdx: Configure TDX module with TDMRs and global KeyID
Date: Thu, 27 Oct 2022 12:16:16 +1300 [thread overview]
Message-ID: <3ad05326024d476ee8d9bc12944d63b035ca2e23.1666824663.git.kai.huang@intel.com> (raw)
In-Reply-To: <cover.1666824663.git.kai.huang@intel.com>
After the TDX-usable memory regions are constructed in an array of TDMRs
and the global KeyID is reserved, configure them to the TDX module using
TDH.SYS.CONFIG SEAMCALL. TDH.SYS.CONFIG can only be called once and can
be done on any logical cpu.
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
---
arch/x86/virt/vmx/tdx/tdx.c | 38 +++++++++++++++++++++++++++++++++++++
arch/x86/virt/vmx/tdx/tdx.h | 2 ++
2 files changed, 40 insertions(+)
diff --git a/arch/x86/virt/vmx/tdx/tdx.c b/arch/x86/virt/vmx/tdx/tdx.c
index 0820ba781f97..fdfce715dda6 100644
--- a/arch/x86/virt/vmx/tdx/tdx.c
+++ b/arch/x86/virt/vmx/tdx/tdx.c
@@ -17,6 +17,7 @@
#include <linux/cpumask.h>
#include <linux/smp.h>
#include <linux/gfp.h>
+#include <linux/slab.h>
#include <linux/align.h>
#include <linux/atomic.h>
#include <linux/sort.h>
@@ -1064,6 +1065,37 @@ static int construct_tdmrs(struct tdmr_info *tdmr_array, int *tdmr_num)
return ret;
}
+static int config_tdx_module(struct tdmr_info *tdmr_array, int tdmr_num,
+ u64 global_keyid)
+{
+ u64 *tdmr_pa_array;
+ int i, array_sz;
+ u64 ret;
+
+ /*
+ * TDMR_INFO entries are configured to the TDX module via an
+ * array of the physical address of each TDMR_INFO. TDX module
+ * requires the array itself to be 512-byte aligned. Round up
+ * the array size to 512-byte aligned so the buffer allocated
+ * by kzalloc() will meet the alignment requirement.
+ */
+ array_sz = ALIGN(tdmr_num * sizeof(u64), TDMR_INFO_PA_ARRAY_ALIGNMENT);
+ tdmr_pa_array = kzalloc(array_sz, GFP_KERNEL);
+ if (!tdmr_pa_array)
+ return -ENOMEM;
+
+ for (i = 0; i < tdmr_num; i++)
+ tdmr_pa_array[i] = __pa(tdmr_array_entry(tdmr_array, i));
+
+ ret = seamcall(TDH_SYS_CONFIG, __pa(tdmr_pa_array), tdmr_num,
+ global_keyid, 0, NULL, NULL);
+
+ /* Free the array as it is not required anymore. */
+ kfree(tdmr_pa_array);
+
+ return ret;
+}
+
/*
* Detect and initialize the TDX module.
*
@@ -1122,11 +1154,17 @@ static int init_tdx_module(void)
*/
tdx_global_keyid = tdx_keyid_start;
+ /* Pass the TDMRs and the global KeyID to the TDX module */
+ ret = config_tdx_module(tdmr_array, tdmr_num, tdx_global_keyid);
+ if (ret)
+ goto out_free_pamts;
+
/*
* Return -EINVAL until all steps of TDX module initialization
* process are done.
*/
ret = -EINVAL;
+out_free_pamts:
if (ret)
tdmrs_free_pamt_all(tdmr_array, tdmr_num);
else
diff --git a/arch/x86/virt/vmx/tdx/tdx.h b/arch/x86/virt/vmx/tdx/tdx.h
index a737f2b51474..c26bab2555ca 100644
--- a/arch/x86/virt/vmx/tdx/tdx.h
+++ b/arch/x86/virt/vmx/tdx/tdx.h
@@ -19,6 +19,7 @@
#define TDH_SYS_INIT 33
#define TDH_SYS_LP_INIT 35
#define TDH_SYS_LP_SHUTDOWN 44
+#define TDH_SYS_CONFIG 45
struct cmr_info {
u64 base;
@@ -86,6 +87,7 @@ struct tdmr_reserved_area {
} __packed;
#define TDMR_INFO_ALIGNMENT 512
+#define TDMR_INFO_PA_ARRAY_ALIGNMENT 512
struct tdmr_info {
u64 base;
--
2.37.3
next prev parent reply other threads:[~2022-10-26 23:18 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-26 23:15 [PATCH v6 00/21] TDX host kernel support Kai Huang
2022-10-26 23:16 ` [PATCH v6 01/21] x86/tdx: Use enum to define page level of TDX supported page sizes Kai Huang
2022-10-27 7:08 ` Xiaoyao Li
2022-10-27 8:42 ` Huang, Kai
2022-10-27 13:51 ` Kirill A. Shutemov
2022-10-28 0:47 ` Huang, Kai
2022-10-27 22:28 ` Isaku Yamahata
2022-10-27 15:27 ` Dave Hansen
2022-10-28 0:10 ` Huang, Kai
2022-10-26 23:16 ` [PATCH v6 02/21] x86/virt/tdx: Detect TDX during kernel boot Kai Huang
2022-10-26 23:16 ` [PATCH v6 03/21] x86/virt/tdx: Disable TDX if X2APIC is not enabled Kai Huang
2022-10-26 23:16 ` [PATCH v6 04/21] x86/virt/tdx: Use all boot-time system memory as TDX memory Kai Huang
2022-10-26 23:16 ` [PATCH v6 05/21] x86/virt/tdx: Add skeleton to initialize TDX on demand Kai Huang
2022-10-26 23:16 ` [PATCH v6 06/21] x86/virt/tdx: Implement functions to make SEAMCALL Kai Huang
2022-10-26 23:16 ` [PATCH v6 07/21] x86/virt/tdx: Shut down TDX module in case of error Kai Huang
2022-10-26 23:16 ` [PATCH v6 08/21] x86/virt/tdx: Do TDX module global initialization Kai Huang
2022-10-26 23:16 ` [PATCH v6 09/21] x86/virt/tdx: Do logical-cpu scope TDX module initialization Kai Huang
2022-10-26 23:16 ` [PATCH v6 10/21] x86/virt/tdx: Get information about TDX module and TDX-capable memory Kai Huang
2022-10-26 23:16 ` [PATCH v6 11/21] x86/virt/tdx: Sanity check all TDX memory ranges are convertible memory Kai Huang
2022-10-26 23:16 ` [PATCH v6 12/21] x86/virt/tdx: Add placeholder to construct TDMRs to cover all TDX memory regions Kai Huang
2022-10-27 15:31 ` Andi Kleen
2022-10-28 2:21 ` Huang, Kai
2022-11-03 8:55 ` Huang, Kai
2022-11-03 15:05 ` Dave Hansen
2022-11-03 22:07 ` Huang, Kai
2022-10-26 23:16 ` [PATCH v6 13/21] x86/virt/tdx: Create " Kai Huang
2022-10-26 23:16 ` [PATCH v6 14/21] x86/virt/tdx: Allocate and set up PAMTs for TDMRs Kai Huang
2022-10-26 23:16 ` [PATCH v6 15/21] x86/virt/tdx: Set up reserved areas for all TDMRs Kai Huang
2022-10-26 23:16 ` [PATCH v6 16/21] x86/virt/tdx: Reserve TDX module global KeyID Kai Huang
2022-10-27 12:40 ` Andi Kleen
2022-10-28 1:24 ` Huang, Kai
2022-10-26 23:16 ` Kai Huang [this message]
2022-10-26 23:16 ` [PATCH v6 18/21] x86/virt/tdx: Configure global KeyID on all packages Kai Huang
2022-10-27 12:35 ` Andi Kleen
2022-10-28 1:07 ` Huang, Kai
2022-10-26 23:16 ` [PATCH v6 19/21] x86/virt/tdx: Initialize all TDMRs Kai Huang
2022-10-27 12:30 ` Andi Kleen
2022-10-28 1:08 ` Huang, Kai
2022-10-26 23:16 ` [PATCH v6 20/21] x86/virt/tdx: Flush cache in kexec() when TDX is enabled Kai Huang
2022-10-26 23:16 ` [PATCH v6 21/21] Documentation/x86: Add documentation for TDX host support Kai Huang
2022-10-27 12:38 ` Andi Kleen
2022-10-28 2:31 ` Huang, Kai
2022-10-28 12:52 ` Bagas Sanjaya
2022-10-28 14:16 ` Dave Hansen
2022-10-26 23:26 ` [PATCH v6 00/21] TDX host kernel support Dave Hansen
2022-10-26 23:51 ` Huang, Kai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3ad05326024d476ee8d9bc12944d63b035ca2e23.1666824663.git.kai.huang@intel.com \
--to=kai.huang@intel.com \
--cc=ak@linux.intel.com \
--cc=bagasdotme@gmail.com \
--cc=chao.gao@intel.com \
--cc=dan.j.williams@intel.com \
--cc=dave.hansen@intel.com \
--cc=imammedo@redhat.com \
--cc=isaku.yamahata@intel.com \
--cc=kirill.shutemov@linux.intel.com \
--cc=kvm@vger.kernel.org \
--cc=len.brown@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=pbonzini@redhat.com \
--cc=peterz@infradead.org \
--cc=rafael.j.wysocki@intel.com \
--cc=reinette.chatre@intel.com \
--cc=sagis@google.com \
--cc=sathyanarayanan.kuppuswamy@linux.intel.com \
--cc=seanjc@google.com \
--cc=tony.luck@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox