linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Miaohe Lin <linmiaohe@huawei.com>
To: "Huang, Ying" <ying.huang@intel.com>
Cc: <akpm@linux-foundation.org>, <dennis@kernel.org>,
	<tim.c.chen@linux.intel.com>, <hughd@google.com>,
	<hannes@cmpxchg.org>, <mhocko@suse.com>, <iamjoonsoo.kim@lge.com>,
	<alexs@kernel.org>, <david@redhat.com>, <minchan@kernel.org>,
	<richard.weiyang@gmail.com>, <linux-kernel@vger.kernel.org>,
	<linux-mm@kvack.org>
Subject: Re: [PATCH v2 3/5] swap: fix do_swap_page() race with swapoff
Date: Mon, 19 Apr 2021 14:54:50 +0800	[thread overview]
Message-ID: <38d0ac56-62e0-76b8-36ef-711089b88d91@huawei.com> (raw)
In-Reply-To: <87k0ozko5c.fsf@yhuang6-desk1.ccr.corp.intel.com>

On 2021/4/19 10:23, Huang, Ying wrote:
> Miaohe Lin <linmiaohe@huawei.com> writes:
> 
>> When I was investigating the swap code, I found the below possible race
>> window:
>>
>> CPU 1                                   	CPU 2
>> -----                                   	-----
>> do_swap_page
> 
> This is OK for swap cache cases.  So
> 
>   if (data_race(si->flags & SWP_SYNCHRONOUS_IO))
> 
> should be shown here.

Ok.

> 
>>   swap_readpage(skip swap cache case)
>>     if (data_race(sis->flags & SWP_FS_OPS)) {
>>                                         	swapoff
>> 					  	  p->flags = &= ~SWP_VALID;
>> 					  	  ..
>> 					  	  synchronize_rcu();
>> 					  	  ..
>> 					  	  p->swap_file = NULL;
>>     struct file *swap_file = sis->swap_file;
>>     struct address_space *mapping = swap_file->f_mapping;[oops!]
>>
>> Note that for the pages that are swapped in through swap cache, this isn't
>> an issue. Because the page is locked, and the swap entry will be marked
>> with SWAP_HAS_CACHE, so swapoff() can not proceed until the page has been
>> unlocked.
>>
>> Using current get/put_swap_device() to guard against concurrent swapoff for
>> swap_readpage() looks terrible because swap_readpage() may take really long
>> time. And this race may not be really pernicious because swapoff is usually
>> done when system shutdown only. To reduce the performance overhead on the
>> hot-path as much as possible, it appears we can use the percpu_ref to close
>> this race window(as suggested by Huang, Ying).
> 
> I still suggest to squash PATCH 1-3, at least PATCH 1-2.  That will
> change the relevant code together and make it easier to review.
> 

Will squash PATCH 1-2. Thanks.

> Best Regards,
> Huang, Ying
> 
>> Fixes: 0bcac06f27d7 ("mm,swap: skip swapcache for swapin of synchronous device")
>> Reported-by: kernel test robot <lkp@intel.com> (auto build test ERROR)
>> Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
>> ---
>>  include/linux/swap.h | 9 +++++++++
>>  mm/memory.c          | 9 +++++++++
>>  2 files changed, 18 insertions(+)
>>
>> diff --git a/include/linux/swap.h b/include/linux/swap.h
>> index 993693b38109..523c2411a135 100644
>> --- a/include/linux/swap.h
>> +++ b/include/linux/swap.h
>> @@ -528,6 +528,15 @@ static inline struct swap_info_struct *swp_swap_info(swp_entry_t entry)
>>  	return NULL;
>>  }
>>  
>> +static inline struct swap_info_struct *get_swap_device(swp_entry_t entry)
>> +{
>> +	return NULL;
>> +}
>> +
>> +static inline void put_swap_device(struct swap_info_struct *si)
>> +{
>> +}
>> +
>>  #define swap_address_space(entry)		(NULL)
>>  #define get_nr_swap_pages()			0L
>>  #define total_swap_pages			0L
>> diff --git a/mm/memory.c b/mm/memory.c
>> index 27014c3bde9f..7a2fe12cf641 100644
>> --- a/mm/memory.c
>> +++ b/mm/memory.c
>> @@ -3311,6 +3311,7 @@ vm_fault_t do_swap_page(struct vm_fault *vmf)
>>  {
>>  	struct vm_area_struct *vma = vmf->vma;
>>  	struct page *page = NULL, *swapcache;
>> +	struct swap_info_struct *si = NULL;
>>  	swp_entry_t entry;
>>  	pte_t pte;
>>  	int locked;
>> @@ -3338,6 +3339,10 @@ vm_fault_t do_swap_page(struct vm_fault *vmf)
>>  		goto out;
>>  	}
>>  
>> +	/* Prevent swapoff from happening to us. */
>> +	si = get_swap_device(entry);
>> +	if (unlikely(!si))
>> +		goto out;
>>  
>>  	delayacct_set_flag(current, DELAYACCT_PF_SWAPIN);
>>  	page = lookup_swap_cache(entry, vma, vmf->address);
>> @@ -3514,6 +3519,8 @@ vm_fault_t do_swap_page(struct vm_fault *vmf)
>>  unlock:
>>  	pte_unmap_unlock(vmf->pte, vmf->ptl);
>>  out:
>> +	if (si)
>> +		put_swap_device(si);
>>  	return ret;
>>  out_nomap:
>>  	pte_unmap_unlock(vmf->pte, vmf->ptl);
>> @@ -3525,6 +3532,8 @@ vm_fault_t do_swap_page(struct vm_fault *vmf)
>>  		unlock_page(swapcache);
>>  		put_page(swapcache);
>>  	}
>> +	if (si)
>> +		put_swap_device(si);
>>  	return ret;
>>  }
> .
> 



  reply	other threads:[~2021-04-19  6:55 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-17  9:40 [PATCH v2 0/5] close various race windows for swap Miaohe Lin
2021-04-17  9:40 ` [PATCH v2 1/5] mm/swapfile: add percpu_ref support " Miaohe Lin
2021-04-19  2:48   ` Huang, Ying
2021-04-19  6:46     ` Miaohe Lin
2021-04-19  7:09       ` Huang, Ying
2021-04-19  7:35         ` Miaohe Lin
2021-04-19  7:52           ` Huang, Ying
2021-04-19  8:20             ` Miaohe Lin
2021-04-17  9:40 ` [PATCH v2 2/5] mm/swapfile: use percpu_ref to serialize against concurrent swapoff Miaohe Lin
2021-04-19  2:54   ` Huang, Ying
2021-04-19  6:57     ` Miaohe Lin
2021-04-17  9:40 ` [PATCH v2 3/5] swap: fix do_swap_page() race with swapoff Miaohe Lin
2021-04-19  2:23   ` Huang, Ying
2021-04-19  6:54     ` Miaohe Lin [this message]
2021-04-17  9:40 ` [PATCH v2 4/5] mm/swap: remove confusing checking for non_swap_entry() in swap_ra_info() Miaohe Lin
2021-04-19  1:53   ` Huang, Ying
2021-04-19  6:46     ` Miaohe Lin
2021-04-17  9:40 ` [PATCH v2 5/5] mm/shmem: fix shmem_swapin() race with swapoff Miaohe Lin
2021-04-19  2:15   ` Huang, Ying
2021-04-19  6:49     ` Miaohe Lin
2021-04-19  7:04       ` Huang, Ying
2021-04-19  7:14         ` Miaohe Lin
2021-04-19  7:41           ` Huang, Ying
2021-04-19  8:18             ` Miaohe Lin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=38d0ac56-62e0-76b8-36ef-711089b88d91@huawei.com \
    --to=linmiaohe@huawei.com \
    --cc=akpm@linux-foundation.org \
    --cc=alexs@kernel.org \
    --cc=david@redhat.com \
    --cc=dennis@kernel.org \
    --cc=hannes@cmpxchg.org \
    --cc=hughd@google.com \
    --cc=iamjoonsoo.kim@lge.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mhocko@suse.com \
    --cc=minchan@kernel.org \
    --cc=richard.weiyang@gmail.com \
    --cc=tim.c.chen@linux.intel.com \
    --cc=ying.huang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox