* [PATCH v14 00/14] EDAC: Scrub: introduce generic EDAC RAS control feature driver + CXL/ACPI-RAS2 drivers
@ 2024-10-25 17:13 shiju.jose
2024-10-25 17:13 ` [PATCH v14 01/14] EDAC: Add support for EDAC device features control shiju.jose
` (14 more replies)
0 siblings, 15 replies; 30+ messages in thread
From: shiju.jose @ 2024-10-25 17:13 UTC (permalink / raw)
To: linux-edac, linux-cxl, linux-acpi, linux-mm, linux-kernel
Cc: bp, tony.luck, rafael, lenb, mchehab, dan.j.williams, dave,
jonathan.cameron, gregkh, sudeep.holla, jassisinghbrar,
dave.jiang, alison.schofield, vishal.l.verma, ira.weiny, david,
Vilas.Sridharan, leo.duran, Yazen.Ghannam, rientjes, jiaqiyan,
Jon.Grimm, dave.hansen, naoya.horiguchi, james.morse, jthoughton,
somasundaram.a, erdemaktas, pgonda, duenwen, gthelen, wschwartz,
dferguson, wbs, nifan.cxl, yazen.ghannam, tanxiaofei, prime.zeng,
roberto.sassu, kangkang.shen, wanghuiqiang, linuxarm, shiju.jose
From: Shiju Jose <shiju.jose@huawei.com>
Previously known as "ras: scrub: introduce subsystem + CXL/ACPI-RAS2 drivers".
Augmenting EDAC for controlling RAS features
============================================
The proposed expansion of EDAC for controlling RAS features and
exposing features control attributes to userspace in sysfs.
Some Examples:
- Scrub control
- Error Check Scrub (ECS) control
- ACPI RAS2 features
- Post Package Repair (PPR) control
- Memory Sparing Repair control etc.
High level design is illustrated in the following diagram.
_______________________________________________
| Userspace - Rasdaemon |
| ____________ |
| | RAS CXL | _______________ |
| | Err Handler|----->| | |
| |____________| | RAS Dynamic | |
| ____________ | Scrub, Memory | |
| | RAS Memory |----->| Repair Control| |
| | Err Handler| |_______________| |
| |____________| | |
|__________________________|____________________|
|
|
_______________________________|______________________________
| Kernel EDAC based SubSystem | for RAS Features Control |
| ______________________________|____________________________ |
|| EDAC Core Sysfs EDAC| Bus | |
|| __________________________|________ _ _____________ | |
|| |/sys/bus/edac/devices/<dev>/scrubX/ | | EDAC Device || |
|| |/sys/bus/edac/devices/<dev>/ecsX/ |<->| EDAC MC || |
|| |/sys/bus/edac/devices/<dev>/repairX | | EDAC Sysfs || |
|| |____________________________________| |_____________|| |
|| | EDAC Bus | |
|| Get | Get | |
|| __________ Features | Features __________ | |
|| | |Descs _________|______ Descs| | | |
|| |EDAC Scrub|<-----| EDAC Device | | EDAC Mem | | |
|| |__________| | Driver- RAS |---->| Repair | | |
|| __________ | Feature Control| |__________| | |
|| | |<-----|________________| | |
|| |EDAC ECS | Register RAS | Features | |
|| |__________| | | |
|| ______________________|_________ | |
||_________|_____________|________________|__________________| |
| _______|____ _____|_________ ____|_________ |
| | | | CXL Mem Driver| | Client Driver| |
| | ACPI RAS2 | | Sparing, PPR, | | Mem Repair | |
| | Driver | | Scrub, ECS | | Features | |
| |____________| |_______________| |______________| |
| | | | |
|________|______________|______________|_______________________|
| | |
_______|______________|______________|_______________________
| __|______________|_ ____________|____________ ____ |
| | | |
| | Platform HW and Firmware | |
| |__________________________________________________| |
|_____________________________________________________________|
1. EDAC RAS Features components - Create feature specific descriptors.
for example, EDAC scrub, EDAC ECS, EDAC memory repair in the above
diagram.
2. EDAC device driver for controlling RAS Features - Get feature's attr
descriptors from EDAC RAS feature component and registers device's
RAS features with EDAC bus and expose the feature's sysfs attributes
under the sysfs EDAC bus.
3. RAS dynamic scrub controller - Userspace sample module added for scrub
control in rasdaemon to issue scrubbing when excess number of memory
errors are reported in a short span of time.
The added EDAC feature specific components (e.g. EDAC scrub, EDAC ECS,
EDAC memory repair etc) do callbacks to the parent driver (e.g. CXL
driver, ACPI RAS driver etc) for the controls rather than just letting the
caller deal with it because of the following reasons.
1. Enforces a common API across multiple implementations can do that
via review, but that's not generally gone well in the long run for
subsystems that have done it (several have later moved to callback
and feature list based approaches).
2. Gives a path for 'intercepting' in the EDAC feature driver.
An example for this is that we could intercept PPR repair calls
and sanity check that the memory in question is offline before
passing back to the underlying code. Sure we could rely on doing
that via some additional calls from the parent driver, but the
ABI will get messier.
3. (Speculative) we may get in kernel users of some features in the
long run.
More details of the common RAS features are described in the following
sections.
Memory Scrubbing
================
Increasing DRAM size and cost has made memory subsystem reliability
an important concern. These modules are used where potentially
corrupted data could cause expensive or fatal issues. Memory errors are
one of the top hardware failures that cause server and workload crashes.
Memory scrub is a feature where an ECC engine reads data from
each memory media location, corrects with an ECC if necessary and
writes the corrected data back to the same memory media location.
The memory DIMMs could be scrubbed at a configurable rate to detect
uncorrected memory errors and attempts to recover from detected memory
errors providing the following benefits.
- Proactively scrubbing memory DIMMs reduces the chance of a correctable
error becoming uncorrectable.
- Once detected, uncorrected errors caught in unallocated memory pages are
isolated and prevented from being allocated to an application or the OS.
- The probability of software/hardware products encountering memory
errors is reduced.
Some details of background can be found in Reference [5].
There are 2 types of memory scrubbing,
1. Background (patrol) scrubbing of the RAM whilst the RAM is otherwise
idle.
2. On-demand scrubbing for a specific address range/region of memory.
There are several types of interfaces to HW memory scrubbers
identified such as ACPI NVDIMM ARS(Address Range Scrub), CXL memory
device patrol scrub, CXL DDR5 ECS, ACPI RAS2 memory scrubbing.
The scrub control varies between different memory scrubbers. To allow
for standard userspace tooling there is a need to present these controls
with a standard ABI.
Introduce generic memory EDAC scrub control which allows user to control
underlying scrubbers in the system via generic sysfs scrub control
interface. The common sysfs scrub control interface abstracts the control
of an arbitrary scrubbing functionality to a common set of functions.
Use case of common scrub control feature
========================================
1. There are several types of interfaces to HW memory scrubbers identified
such as ACPI NVDIMM ARS(Address Range Scrub), CXL memory device patrol
scrub, CXL DDR5 ECS, ACPI RAS2 memory scrubbing features and software
based memory scrubber(discussed in the community Reference [5]).
Also some scrubbers support controlling (background) patrol scrubbing
(ACPI RAS2, CXL) and/or on-demand scrubbing(ACPI RAS2, ACPI ARS).
However the scrub controls varies between memory scrubbers. Thus there
is a requirement for a standard generic sysfs scrub controls exposed
to userspace for the seamless control of the HW/SW scrubbers in
the system by admin/scripts/tools etc.
2. Scrub controls in user space allow the user to disable the scrubbing
in case disabling of the background patrol scrubbing or changing the
scrub rate are needed for other purposes such as performance-aware
operations which requires the background operations to be turned off
or reduced.
3. Allows to perform on-demand scrubbing for specific address range if
supported by the scrubber.
4. User space tools controls scrub the memory DIMMs regularly at a
configurable scrub rate using the sysfs scrub controls discussed help,
- to detect uncorrectable memory errors early before user accessing memory,
which helps to recover the detected memory errors.
- reduces the chance of a correctable error becoming uncorrectable.
5. Policy control for hotplugged memory. There is not necessarily a system
wide bios or similar in the loop to control the scrub settings on a CXL
device that wasn't there at boot. What that setting should be is a policy
decision as we are trading of reliability vs performance - hence it should
be in control of userspace. As such, 'an' interface is needed. Seems more
sensible to try and unify it with other similar interfaces than spin
yet another one.
The draft version of userspace code added in rasdaemon for dynamic scrub
control, based on frequency of memory errors reported to userspace, tested
for CXL device based patrol scrubbing feature and ACPI RAS2 based
scrubbing feature.
https://github.com/shijujose4/rasdaemon/tree/ras_feature_control
ToDO: For memory repair features, such as PPR, memory sparing, rasdaemon
collates records and decides to replace a row if there are lots of
corrected errors, or a single uncorrected error or error record received
with maintenance request flag set as in some CXL event records.
Comparison of scrubbing features
================================
................................................................
. . ACPI . CXL patrol. CXL ECS . ARS .
. Name . RAS2 . scrub . . .
................................................................
. . . . . .
. On-demand . Supported . No . No . Supported .
. Scrubbing . . . . .
. . . . . .
................................................................
. . . . . .
. Background . Supported . Supported . Supported . No .
. scrubbing . . . . .
. . . . . .
................................................................
. . . . . .
. Mode of . Scrub ctrl. per device. per memory. Unknown .
. scrubbing . per NUMA . . media . .
. . domain. . . . .
................................................................
. . . . . .
. Query scrub . Supported . Supported . Supported . Supported .
. capabilities . . . . .
. . . . . .
................................................................
. . . . . .
. Setting . Supported . No . No . Supported .
. address range. . . . .
. . . . . .
................................................................
. . . . . .
. Setting . Supported . Supported . No . No .
. scrub rate . . . . .
. . . . . .
................................................................
. . . . . .
. Unit for . Not . in hours . No . No .
. scrub rate . Defined . . . .
. . . . . .
................................................................
. . Supported . . . .
. Scrub . on-demand . No . No . Supported .
. status/ . scrubbing . . . .
. Completion . only . . . .
................................................................
. UC error . .CXL general.CXL general. ACPI UCE .
. reporting . Exception .media/DRAM .media/DRAM . notify and.
. . .event/media.event/media. query .
. . .scan? .scan? . ARS status.
................................................................
. . . . . .
. Clear UC . No . No . No . Supported .
. error . . . . .
. . . . . .
................................................................
. . . . . .
. Translate . No . No . No . Supported .
. *(1)SPA to . . . . .
. *(2)DPA . . . . .
................................................................
*(1) - SPA - System Physical Address. See section 9.19.7.8
Function Index 5 - Translate SPA of ACPI spec r6.5.
*(2) - DPA - Device Physical Address. See section 9.19.7.8
Function Index 5 - Translate SPA of ACPI spec r6.5.
CXL Memory Scrubbing features
=============================
CXL spec r3.1 section 8.2.9.9.11.1 describes the memory device patrol scrub
control feature. The device patrol scrub proactively locates and makes
corrections to errors in regular cycle. The patrol scrub control allows the
request to configure patrol scrubber's input configurations.
The patrol scrub control allows the requester to specify the number of
hours in which the patrol scrub cycles must be completed, provided that
the requested number is not less than the minimum number of hours for the
patrol scrub cycle that the device is capable of. In addition, the patrol
scrub controls allow the host to disable and enable the feature in case
disabling of the feature is needed for other purposes such as
performance-aware operations which require the background operations to be
turned off.
The Error Check Scrub (ECS) is a feature defined in JEDEC DDR5 SDRAM
Specification (JESD79-5) and allows the DRAM to internally read, correct
single-bit errors, and write back corrected data bits to the DRAM array
while providing transparency to error counts.
The DDR5 device contains number of memory media FRUs per device. The
DDR5 ECS feature and thus the ECS control driver supports configuring
the ECS parameters per FRU.
ACPI RAS2 Hardware-based Memory Scrubbing
=========================================
ACPI spec 6.5 section 5.2.21 ACPI RAS2 describes ACPI RAS2 table
provides interfaces for platform RAS features and supports independent
RAS controls and capabilities for a given RAS feature for multiple
instances of the same component in a given system.
Memory RAS features apply to RAS capabilities, controls and operations
that are specific to memory. RAS2 PCC sub-spaces for memory-specific RAS
features have a Feature Type of 0x00 (Memory).
The platform can use the hardware-based memory scrubbing feature to expose
controls and capabilities associated with hardware-based memory scrub
engines. The RAS2 memory scrubbing feature supports following as per spec,
- Independent memory scrubbing controls for each NUMA domain, identified
using its proximity domain.
Note: However AmpereComputing has single entry repeated as they have
centralized controls.
- Provision for background (patrol) scrubbing of the entire memory system,
as well as on-demand scrubbing for a specific region of memory.
ACPI Address Range Scrubbing(ARS)
================================
ARS allows the platform to communicate memory errors to system software.
This capability allows system software to prevent accesses to addresses
with uncorrectable errors in memory. ARS functions manage all NVDIMMs
present in the system. Only one scrub can be in progress system wide
at any given time.
Following functions are supported as per the specification.
1. Query ARS Capabilities for a given address range, indicates platform
supports the ACPI NVDIMM Root Device Unconsumed Error Notification.
2. Start ARS triggers an Address Range Scrub for the given memory range.
Address scrubbing can be done for volatile memory, persistent memory,
or both.
3. Query ARS Status command allows software to get the status of ARS,
including the progress of ARS and ARS error record.
4. Clear Uncorrectable Error.
5. Translate SPA
6. ARS Error Inject etc.
Note: Support for ARS is not added in this series because to reduce the
line of code for review and could be added after initial code is merged.
We'd like feedback on whether this is of interest to ARS community?
Post Package Repair(PPR)
========================
PPR (Post Package Repair) maintenance operation requests the memory device
to perform a repair operation on its media if supported. A memory device
may support two types of PPR: Hard PPR (hPPR), for a permanent row repair,
and Soft PPR (sPPR), for a temporary row repair. sPPR is much faster than
hPPR, but the repair is lost with a power cycle. During the execution of a
PPR maintenance operation, a memory device, may or may not retain data and
may or may not be able to process memory requests correctly. sPPR maintenance
operation may be executed at runtime, if data is retained and memory requests
are correctly processed. hPPR maintenance operation may be executed only at
boot because data would not be retained.
Use cases of common PPR control feature
=======================================
1. The Soft PPR (sPPR) and Hard PPR (hPPR) share similar control interfaces,
thus there is a requirement for a standard generic sysfs PPR controls exposed
to userspace for the seamless control of the PPR features in the system by the
admin/scripts/tools etc.
2. When a CXL device identifies a failure on a memory component, the device
may inform the host about the need for a PPR maintenance operation by using
an event record, where the maintenance needed flag is set. The event record
specifies the DPA that should be repaired. Kernel reports the corresponding
cxl general media or DRAM trace event to userspace. The userspace tool,
for reg. rasdaemon initiate a PPR maintenance operation in response to a
device request using the sysfs PPR control.
3. User space tools, for eg. rasdaemon, do request PPR on a memory region
when uncorrected memory error or excess corrected memory errors reported
on that memory.
4. Likely multiple instances of PPR present per memory device.
Memory Sparing
==============
Memory sparing is defined as a repair function that replaces a portion of
memory with a portion of functional memory at that same DPA. User space
tool, e.g. rasdaemon, may request the sparing operation for a given
address for which the uncorrectable error is reported. In CXL,
(CXL spec 3.1 section 8.2.9.7.1.4) subclasses for sparing operation vary
in terms of the scope of the sparing being performed. The cacheline sparing
subclass refers to a sparing action that can replace a full cacheline.
Row sparing is provided as an alternative to PPR sparing functions and its
scope is that of a single DDR row. Bank sparing allows an entire bank to
be replaced. Rank sparing is defined as an operation in which an entire
DDR rank is replaced.
Series adds,
1. EDAC device driver extended for controlling RAS features, EDAC scrub
driver, EDAC ECS driver, EDAC memory repair driver supports memory
scrub control, ECS control, memory repair(PPR, sparing) control
respectively.
2. Support for CXL feature mailbox commands, which is used by
CXL device scrubbing and memory repair features.
3. CXL features driver supporting patrol scrub control (device and
region based).
4. CXL features driver supporting ECS control feature.
5. ACPI RAS2 driver adds OS interface for RAS2 communication through
PCC mailbox and extracts ACPI RAS2 feature table (RAS2) and
create platform device for the RAS memory features, which binds
to the memory ACPI RAS2 driver.
7. Memory ACPI RAS2 driver gets the PCC subspace for communicating
with the ACPI compliant platform supports ACPI RAS2. Add callback
functions and registers with EDAC device to support user to
control the HW patrol scrubbers exposed to the kernel via the
ACPI RAS2 table.
8. Support for CXL maintenance mailbox command, which is used by
CXL device memory repair feature.
9. CXL features driver supporting PPR control feature.
9. CXL features driver supporting memory sparing control feature.
10. Note: There are other PPR, memory sparing drivers to come.
Open Questions based on feedbacks from the community:
1. Leo: Standardize unit for scrub rate, for example ACPI RAS2 does not define
unit for the scrub rate. RAS2 clarification needed.
2. Jonathan: Any need for discoverability of capability to scan different regions,
such as global PA space to userspace. Left as future extension.
3. Jiaqi:
- STOP_PATROL_SCRUBBER from RAS2 must be blocked and, must not be exposed to
OS/userspace. Stopping patrol scrubber is unacceptable for platform where
OEM has enabled patrol scrubber, because the patrol scrubber is a key part
of logging and is repurposed for other RAS actions.
If the OEM does not want to expose this control, they should lock it down so the
interface is not exposed to the OS. These features are optional after all.
- "Requested Address Range"/"Actual Address Range" (region to scrub) is a
similarly bad thing to expose in RAS2.
If the OEM does not want to expose this, they should lock it down so the
interface is not exposed to the OS. These features are optional after all.
4. Borislav:
- How the scrub control exposed to userspace will be used?
POC added in rasdaemon with dynamic scrub control for CXL memory media
errors and memory errors reported to userspace.
https://github.com/shijujose4/rasdaemon/tree/scrub_control_6_june_2024
- Is the scrub interface is sufficient for the use cases?
- Who is going to use scrub controls tools/admin/scripts?
1) Rasdaemon for dynamic control
2) Udev script for more static 'defaults' on hotplug etc.
5. PPR
- For PPR, rasdaemon collates records and decides to replace a row if there
are lots of corrected errors, or a single uncorrected error or error record
received with maintenance request flag set as in CXL DRAM error record.
- sPPR more or less startup only (so faking hPPR) or actually useful
in a running system (if not the safe version that keeps everything
running whilst replacement is ongoing)
- Is future proofing for multiple PPR units useful given we've mashed
together hPPR and sPPR for CXL.
Implementation
==============
1. Linux kernel
Version 14 of kernel implementations of RAS features control is available in,
https://github.com/shijujose4/linux.git
Branch: edac-enhancement-ras-features_v14
2. QEMU emulation
QEMU for CXL RAS features implementation is available in,
https://gitlab.com/shiju.jose/qemu.git
Branch: cxl-ras-features-2024-10-24
3. Userspace rasdaemon
The draft version of userspace sample code for dynamic scrub control,
based on frequency of memory errors reported to userspace, is added
in rasdaemon and enabled, tested for CXL device based patrol scrubbing
feature and ACPI RAS2 based scrubbing feature. This required updation
for the latest sysfs scrub interface.
https://github.com/shijujose4/rasdaemon/tree/ras_feature_control
ToDO: For PPR, rasdaemon collates records and decides to replace a row if there
are lots of corrected errors, or a single uncorrected error or error
record received with maintenance request flag set as in CXL DRAM error
record.
References:
1. ACPI spec r6.5 section 5.2.21 ACPI RAS2.
2. ACPI spec r6.5 section 9.19.7.2 ARS.
3. CXL spec r3.1 8.2.9.9.11.1 Device patrol scrub control feature
4. CXL spec r3.1 8.2.9.9.11.2 DDR5 ECS feature
5. CXL spec r3.1 8.2.9.7.1.1 PPR Maintenance Operations
6. CXL spec r3.1 8.2.9.7.2.1 sPPR Feature Discovery and Configuration
7. CXL spec r3.1 8.2.9.7.2.2 hPPR Feature Discovery and Configuration
8. Background information about kernel support for memory scan, memory
error detection and ACPI RASF.
https://lore.kernel.org/all/20221103155029.2451105-1-jiaqiyan@google.com/
9. Discussions on RASF:
https://lore.kernel.org/lkml/20230915172818.761-1-shiju.jose@huawei.com/#r
Changes
=======
v13 -> v14:
1. Changes and Fixes for feedback from Boris
- Check grammar of patch description.
- Changed scrub control attributes for memory scrub range to "addr" and "size".
- Fixed unreached code in edac_dev_register().
- Removed enable_on_demand attribute from EDAC scrub control and modified
RAS2 driver for the same.
- Updated ABI documentation for EDAC scrub control.
etc.
2. Changes for feedback from Greg/Rafael/Jonathan for ACPI RAS2
- Replaced platform device creation and binding with
auxiliary device creation and binding with ACPI RAS2
memory auxiliary driver.
3. Changes and Fixes for feedback from Jonathan
- Fixed unreached code in edac_dev_register().
- Optimize callback functions in CXL ECS using macros.
- Add readback attributes for the EDAC memory repair feature
and add support in the CXL driver for PPR and memory sparing.
- Add refactoring in the CXL driver for PPR and memory sparing
for query/repair maintenance commands.
- Add cxl_dpa_to_region_locked() function.
- Some more cleanups in the ACPI RAS2 and RAS2 memory drivers.
etc.
4. Changes and Fixes for feedback from Ni Fan
- Fixed compilation error - cxl_mem_ras_features_init refined, when CXL components
build as module.
5. Optimize callback functions in CXL memory sparing using macros.
etc.
v12 -> v13:
1. Changes and Fixes for feedback from Boris
- Function edac_dev_feat_init() merge with edac_dev_register()
- Add macros in EDAC feature specific code for repeated code.
- Correct spelling mistakes.
- Removed feature specific code from the patch "EDAC: Add support
for EDAC device features control"
2. Changes for feedbacks from Dave Jiang
- Move fields num_features and entries to struct cxl_mailbox,
in "cxl: Add Get Supported Features command for kernel usage"
- Use series from
https://lore.kernel.org/linux-cxl/20240905223711.1990186-1-dave.jiang@intel.com/
3. Changes and Fixes for feedback from Ni Fan
- In documentation scrub* to scrubX, ecs_fru* to ecs_fruX
- Corrected some grammar mistakes in the patch headers.
- Fixed an error print for min_scrub_cycle_hrs in the CXL patrol scrub
code.
- Improved an error print in the CXL ECS code.
- bool -> tristate for config CXL_RAS_FEAT
4. Add support for CXL memory sparing feature.
5. Add common EDAC memory repair driver for controlling memory repair
features, PPR, memory sparing etc.
v11 -> v12:
1. Changes and Fixes for feedback from Boris mainly for
patch "EDAC: Add support for EDAC device features control"
and other generic comments.
2. Took CXL patches from Dave Jiang for "Add Get Supported Features
command for kernel usage" and other related patches. Merged helper
functions from this series to the above patch. Modifications of
CXL code in this series due to refactoring of CXL mailbox in Dave's
patches.
3. Modified EDAC scrub control code to support multiple scrub instances
per device.
v10 -> v11:
1. Feedback from Borislav:
- Add generic EDAC code for control device features to
/drivers/edac/edac_device.c.
- Add common structure in edac for device feature's data.
2. Some more optimizations in generic EDAC code for control
device features.
3. Changes for feedback from Fan for ACPI RAS2 memory driver.
4. Add support for control memory PPR (Post Package Repair) features
in EDAC.
5. Add support for maintenance command in the CXL mailbox code,
which is needed for support PPR features in CXL driver.
6. Add support for control memory PPR (Post Package Repair) features
and do perform PPR maintenance operation in CXL driver.
7. Rename drivers/cxl/core/memscrub.c to drivers/cxl/core/memfeature.c
v9 -> v10:
1. Feedback from Mauro Carvalho Chehab:
- Changes suggested in EDAC RAS feature driver.
use uppercase for enums, if else to switch-case, documentation for
static scrub and ecs init functions etc.
- Changes suggested in EDAC scrub.
unit of scrub cycle hour to seconds.
attribute node cycle_in_hours_available to min_cycle_duration and
max_cycle_duration.
attribute node cycle_in_hours to current_cycle_duration.
Use base 0 for kstrtou64() and kstrtol() functions.
etc.
- Changes suggested in EDAC ECS.
uppercase for enums
add ABI documentation. etc
2. Feedback from Fan:
- Changes suggested in EDAC RAS feature driver.
use uppercase for enums, change if...else to switch-case.
some optimization in edac_ras_dev_register() function
add missing goto free_ctx
- Changes suggested in the code for feature commands.
- CXL driver scrub and ECS code
use uppercase for enums, fix typo, use enum type for mode
fix lonf lines etc.
v8 -> v9:
1. Feedback from Borislav:
- Add scrub control driver to the EDAC on feedback from Borislav.
- Changed DEVICE_ATTR_..() static.
- Changed the write permissions for scrub control sysfs files as
root-only.
2. Feedback from Fan:
- Optimized cxl_get_feature() function by using min() and removed
feat_out_min_size.
- Removed unreached return from cxl_set_feature() function.
- Changed the term "rate" to "cycle_in_hours" in all the
scrub control code.
- Allow cxl_mem_probe() continue if cxl_mem_patrol_scrub_init() fail,
with just a debug warning.
3. Feedback from Jonathan:
- Removed patch __free() based cleanup function for acpi_put_table.
and added fix in the acpi RAS2 driver.
4. Feedback from Dan Williams:
- Allow cxl_mem_probe() continue if cxl_mem_patrol_scrub_init() fail,
with just a debug warning.
- Add support for CXL region based scrub control.
5. Feedback from Daniel Ferguson on RAS2 drivers:
In the ACPI RAS2 driver,
- Incorporated the changes given for clearing error reported.
- Incorporated the changes given for check the Set RAS Capability
status and return an appropriate error.
In the RAS2 memory driver,
- Added more checks for start/stop bg and on-demand scrubbing
so that addr range in cache do not get cleared and restrict
permitted operations during scrubbing.
History for v1 to v8 is available here.
https://lore.kernel.org/lkml/20240726160556.2079-1-shiju.jose@huawei.com/
Dave Jiang (1):
cxl: Add Get Supported Features command for kernel usage
Shiju Jose (13):
EDAC: Add support for EDAC device features control
EDAC: Add scrub control feature
EDAC: Add ECS control feature
cxl/mbox: Add GET_FEATURE mailbox command
cxl/mbox: Add SET_FEATURE mailbox command
cxl/memfeature: Add CXL memory device patrol scrub control feature
cxl/memfeature: Add CXL memory device ECS control feature
ACPI:RAS2: Add ACPI RAS2 driver
ras: mem: Add memory ACPI RAS2 driver
EDAC: Add memory repair control feature
cxl/mbox: Add support for PERFORM_MAINTENANCE mailbox command
cxl/memfeature: Add CXL memory device sPPR control feature
cxl/memfeature: Add CXL memory device memory sparing control feature
Documentation/ABI/testing/sysfs-edac-ecs | 76 +
.../ABI/testing/sysfs-edac-mem-repair | 152 ++
Documentation/ABI/testing/sysfs-edac-scrub | 74 +
Documentation/edac/edac-scrub.rst | 111 ++
drivers/acpi/Kconfig | 11 +
drivers/acpi/Makefile | 1 +
drivers/acpi/ras2.c | 409 +++++
drivers/cxl/Kconfig | 18 +
drivers/cxl/core/Makefile | 1 +
drivers/cxl/core/mbox.c | 324 ++++
drivers/cxl/core/memfeature.c | 1583 +++++++++++++++++
drivers/cxl/core/region.c | 6 +
drivers/cxl/cxlmem.h | 131 ++
drivers/cxl/mem.c | 4 +
drivers/cxl/pci.c | 4 +
drivers/edac/Makefile | 1 +
drivers/edac/ecs.c | 240 +++
drivers/edac/edac_device.c | 177 ++
drivers/edac/mem_repair.c | 358 ++++
drivers/edac/scrub.c | 211 +++
drivers/ras/Kconfig | 10 +
drivers/ras/Makefile | 1 +
drivers/ras/acpi_ras2.c | 385 ++++
include/acpi/ras2_acpi.h | 45 +
include/cxl/mailbox.h | 4 +
include/linux/edac.h | 198 +++
include/uapi/linux/cxl_mem.h | 1 +
27 files changed, 4536 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-edac-ecs
create mode 100644 Documentation/ABI/testing/sysfs-edac-mem-repair
create mode 100644 Documentation/ABI/testing/sysfs-edac-scrub
create mode 100644 Documentation/edac/edac-scrub.rst
create mode 100755 drivers/acpi/ras2.c
create mode 100644 drivers/cxl/core/memfeature.c
create mode 100755 drivers/edac/ecs.c
create mode 100755 drivers/edac/mem_repair.c
create mode 100755 drivers/edac/scrub.c
create mode 100644 drivers/ras/acpi_ras2.c
create mode 100644 include/acpi/ras2_acpi.h
--
2.34.1
^ permalink raw reply [flat|nested] 30+ messages in thread
* [PATCH v14 01/14] EDAC: Add support for EDAC device features control
2024-10-25 17:13 [PATCH v14 00/14] EDAC: Scrub: introduce generic EDAC RAS control feature driver + CXL/ACPI-RAS2 drivers shiju.jose
@ 2024-10-25 17:13 ` shiju.jose
2024-10-25 17:13 ` [PATCH v14 02/14] EDAC: Add scrub control feature shiju.jose
` (13 subsequent siblings)
14 siblings, 0 replies; 30+ messages in thread
From: shiju.jose @ 2024-10-25 17:13 UTC (permalink / raw)
To: linux-edac, linux-cxl, linux-acpi, linux-mm, linux-kernel
Cc: bp, tony.luck, rafael, lenb, mchehab, dan.j.williams, dave,
jonathan.cameron, gregkh, sudeep.holla, jassisinghbrar,
dave.jiang, alison.schofield, vishal.l.verma, ira.weiny, david,
Vilas.Sridharan, leo.duran, Yazen.Ghannam, rientjes, jiaqiyan,
Jon.Grimm, dave.hansen, naoya.horiguchi, james.morse, jthoughton,
somasundaram.a, erdemaktas, pgonda, duenwen, gthelen, wschwartz,
dferguson, wbs, nifan.cxl, yazen.ghannam, tanxiaofei, prime.zeng,
roberto.sassu, kangkang.shen, wanghuiqiang, linuxarm, shiju.jose
From: Shiju Jose <shiju.jose@huawei.com>
Add generic EDAC device feature controls supporting the registration
of RAS features available in the system. The driver exposes control
attributes for these features to userspace in
/sys/bus/edac/devices/<dev-name>/<ras-feature>/
Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
---
drivers/edac/edac_device.c | 101 +++++++++++++++++++++++++++++++++++++
include/linux/edac.h | 30 +++++++++++
2 files changed, 131 insertions(+)
diff --git a/drivers/edac/edac_device.c b/drivers/edac/edac_device.c
index 621dc2a5d034..e9229b5f8afe 100644
--- a/drivers/edac/edac_device.c
+++ b/drivers/edac/edac_device.c
@@ -570,3 +570,104 @@ void edac_device_handle_ue_count(struct edac_device_ctl_info *edac_dev,
block ? block->name : "N/A", count, msg);
}
EXPORT_SYMBOL_GPL(edac_device_handle_ue_count);
+
+/* EDAC device feature */
+static void edac_dev_release(struct device *dev)
+{
+ struct edac_dev_feat_ctx *ctx = container_of(dev, struct edac_dev_feat_ctx, dev);
+
+ kfree(ctx->dev.groups);
+ kfree(ctx);
+}
+
+const struct device_type edac_dev_type = {
+ .name = "edac_dev",
+ .release = edac_dev_release,
+};
+
+static void edac_dev_unreg(void *data)
+{
+ device_unregister(data);
+}
+
+/**
+ * edac_dev_register - register device for RAS features with EDAC
+ * @parent: parent device.
+ * @name: parent device's name.
+ * @private: parent driver's data to store in the context if any.
+ * @num_features: number of RAS features to register.
+ * @ras_features: list of RAS features to register.
+ *
+ * Return:
+ * * %0 - Success.
+ * * %-EINVAL - Invalid parameters passed.
+ * * %-ENOMEM - Dynamic memory allocation failed.
+ *
+ */
+int edac_dev_register(struct device *parent, char *name,
+ void *private, int num_features,
+ const struct edac_dev_feature *ras_features)
+{
+ const struct attribute_group **ras_attr_groups;
+ struct edac_dev_feat_ctx *ctx;
+ int attr_gcnt = 0;
+ int ret, feat;
+
+ if (!parent || !name || !num_features || !ras_features)
+ return -EINVAL;
+
+ /* Double parse to make space for attributes */
+ for (feat = 0; feat < num_features; feat++) {
+ switch (ras_features[feat].ft_type) {
+ /* Add feature specific code */
+ default:
+ return -EINVAL;
+ }
+ }
+
+ ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ ras_attr_groups = kcalloc(attr_gcnt + 1, sizeof(*ras_attr_groups), GFP_KERNEL);
+ if (!ras_attr_groups) {
+ ret = -ENOMEM;
+ goto ctx_free;
+ }
+
+ attr_gcnt = 0;
+ for (feat = 0; feat < num_features; feat++, ras_features++) {
+ switch (ras_features->ft_type) {
+ /* Add feature specific code */
+ default:
+ ret = -EINVAL;
+ goto groups_free;
+ }
+ }
+
+ ctx->dev.parent = parent;
+ ctx->dev.bus = edac_get_sysfs_subsys();
+ ctx->dev.type = &edac_dev_type;
+ ctx->dev.groups = ras_attr_groups;
+ ctx->private = private;
+ dev_set_drvdata(&ctx->dev, ctx);
+
+ ret = dev_set_name(&ctx->dev, name);
+ if (ret)
+ goto groups_free;
+
+ ret = device_register(&ctx->dev);
+ if (ret) {
+ put_device(&ctx->dev);
+ return ret;
+ }
+
+ return devm_add_action_or_reset(parent, edac_dev_unreg, &ctx->dev);
+
+groups_free:
+ kfree(ras_attr_groups);
+ctx_free:
+ kfree(ctx);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(edac_dev_register);
diff --git a/include/linux/edac.h b/include/linux/edac.h
index b4ee8961e623..e19706311ec0 100644
--- a/include/linux/edac.h
+++ b/include/linux/edac.h
@@ -661,4 +661,34 @@ static inline struct dimm_info *edac_get_dimm(struct mem_ctl_info *mci,
return mci->dimms[index];
}
+
+/* EDAC device features */
+
+#define EDAC_FEAT_NAME_LEN 128
+
+/* RAS feature type */
+enum edac_dev_feat {
+ RAS_FEAT_MAX
+};
+
+/* EDAC device feature information structure */
+struct edac_dev_data {
+ u8 instance;
+ void *private;
+};
+
+struct edac_dev_feat_ctx {
+ struct device dev;
+ void *private;
+};
+
+struct edac_dev_feature {
+ enum edac_dev_feat ft_type;
+ u8 instance;
+ void *ctx;
+};
+
+int edac_dev_register(struct device *parent, char *dev_name,
+ void *parent_pvt_data, int num_features,
+ const struct edac_dev_feature *ras_features);
#endif /* _LINUX_EDAC_H_ */
--
2.34.1
^ permalink raw reply [flat|nested] 30+ messages in thread
* [PATCH v14 02/14] EDAC: Add scrub control feature
2024-10-25 17:13 [PATCH v14 00/14] EDAC: Scrub: introduce generic EDAC RAS control feature driver + CXL/ACPI-RAS2 drivers shiju.jose
2024-10-25 17:13 ` [PATCH v14 01/14] EDAC: Add support for EDAC device features control shiju.jose
@ 2024-10-25 17:13 ` shiju.jose
2024-10-25 17:13 ` [PATCH v14 03/14] EDAC: Add ECS " shiju.jose
` (12 subsequent siblings)
14 siblings, 0 replies; 30+ messages in thread
From: shiju.jose @ 2024-10-25 17:13 UTC (permalink / raw)
To: linux-edac, linux-cxl, linux-acpi, linux-mm, linux-kernel
Cc: bp, tony.luck, rafael, lenb, mchehab, dan.j.williams, dave,
jonathan.cameron, gregkh, sudeep.holla, jassisinghbrar,
dave.jiang, alison.schofield, vishal.l.verma, ira.weiny, david,
Vilas.Sridharan, leo.duran, Yazen.Ghannam, rientjes, jiaqiyan,
Jon.Grimm, dave.hansen, naoya.horiguchi, james.morse, jthoughton,
somasundaram.a, erdemaktas, pgonda, duenwen, gthelen, wschwartz,
dferguson, wbs, nifan.cxl, yazen.ghannam, tanxiaofei, prime.zeng,
roberto.sassu, kangkang.shen, wanghuiqiang, linuxarm, shiju.jose
From: Shiju Jose <shiju.jose@huawei.com>
Add a generic EDAC scrub control to manage memory scrubbers in the system.
Devices with a scrub feature register with the EDAC device driver, which
retrieves the scrub descriptor from the EDAC scrub driver and exposes the
sysfs scrub control attributes for a scrub instance to userspace at
/sys/bus/edac/devices/<dev-name>/scrubX/.
The common sysfs scrub control interface abstracts the control of
arbitrary scrubbing functionality into a common set of functions. The
sysfs scrub attribute nodes are only present if the client driver has
implemented the corresponding attribute callback function and passed the
operations(ops) to the EDAC device driver during registration.
Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
---
Documentation/ABI/testing/sysfs-edac-scrub | 74 ++++++++
drivers/edac/Makefile | 1 +
drivers/edac/edac_device.c | 38 +++-
drivers/edac/scrub.c | 211 +++++++++++++++++++++
include/linux/edac.h | 34 ++++
5 files changed, 354 insertions(+), 4 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-edac-scrub
create mode 100755 drivers/edac/scrub.c
diff --git a/Documentation/ABI/testing/sysfs-edac-scrub b/Documentation/ABI/testing/sysfs-edac-scrub
new file mode 100644
index 000000000000..183a9c4e7139
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-edac-scrub
@@ -0,0 +1,74 @@
+What: /sys/bus/edac/devices/<dev-name>/scrubX
+Date: Jan 2025
+KernelVersion: 6.13
+Contact: linux-edac@vger.kernel.org
+Description:
+ The sysfs EDAC bus devices /<dev-name>/scrubX subdirectory
+ belongs to an instance of memory scrub control feature,
+ where <dev-name> directory corresponds to a device/memory
+ region registered with the EDAC device driver for the
+ scrub control feature.
+ The sysfs scrub attr nodes are only present if the
+ client driver has implemented the corresponding attr
+ callback function and passed in ops to the EDAC RAS feature
+ driver during registration.
+
+What: /sys/bus/edac/devices/<dev-name>/scrubX/addr
+Date: Jan 2025
+KernelVersion: 6.13
+Contact: linux-edac@vger.kernel.org
+Description:
+ (RW) The base address of the memory region to be scrubbed
+ for on-demand scrubbing. Setting address would start
+ scrubbing. The size must be set before that.
+ The readback addr value would be non-zero if the requested
+ on-demand scrubbing is in progress, zero otherwise.
+
+What: /sys/bus/edac/devices/<dev-name>/scrubX/size
+Date: Jan 2025
+KernelVersion: 6.13
+Contact: linux-edac@vger.kernel.org
+Description:
+ (RW) The size of the memory region to be scrubbed
+ (on-demand scrubbing).
+
+What: /sys/bus/edac/devices/<dev-name>/scrubX/enable_background
+Date: Jan 2025
+KernelVersion: 6.13
+Contact: linux-edac@vger.kernel.org
+Description:
+ (RW) Start/Stop background(patrol) scrubbing if supported.
+
+What: /sys/bus/edac/devices/<dev-name>/scrubX/enable_on_demand
+Date: Jan 2025
+KernelVersion: 6.13
+Contact: linux-edac@vger.kernel.org
+Description:
+ (RW) Start/Stop on-demand scrubbing the memory region
+ if supported.
+
+What: /sys/bus/edac/devices/<dev-name>/scrubX/min_cycle_duration
+Date: Jan 2025
+KernelVersion: 6.13
+Contact: linux-edac@vger.kernel.org
+Description:
+ (RO) Supported minimum scrub cycle duration in seconds
+ by the memory scrubber.
+
+What: /sys/bus/edac/devices/<dev-name>/scrubX/max_cycle_duration
+Date: Jan 2025
+KernelVersion: 6.13
+Contact: linux-edac@vger.kernel.org
+Description:
+ (RO) Supported maximum scrub cycle duration in seconds
+ by the memory scrubber.
+
+What: /sys/bus/edac/devices/<dev-name>/scrubX/current_cycle_duration
+Date: Jan 2025
+KernelVersion: 6.13
+Contact: linux-edac@vger.kernel.org
+Description:
+ (RW) The current scrub cycle duration in seconds and must be
+ within the supported range by the memory scrubber.
+ Scrub has an overhead when running and that may want to be
+ reduced by taking longer to do it.
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index faf310eec4a6..188501e676c7 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_EDAC) := edac_core.o
edac_core-y := edac_mc.o edac_device.o edac_mc_sysfs.o
edac_core-y += edac_module.o edac_device_sysfs.o wq.o
+edac_core-y += scrub.o
edac_core-$(CONFIG_EDAC_DEBUG) += debugfs.o
diff --git a/drivers/edac/edac_device.c b/drivers/edac/edac_device.c
index e9229b5f8afe..91552271b34a 100644
--- a/drivers/edac/edac_device.c
+++ b/drivers/edac/edac_device.c
@@ -576,6 +576,7 @@ static void edac_dev_release(struct device *dev)
{
struct edac_dev_feat_ctx *ctx = container_of(dev, struct edac_dev_feat_ctx, dev);
+ kfree(ctx->scrub);
kfree(ctx->dev.groups);
kfree(ctx);
}
@@ -609,6 +610,8 @@ int edac_dev_register(struct device *parent, char *name,
const struct edac_dev_feature *ras_features)
{
const struct attribute_group **ras_attr_groups;
+ int scrub_cnt = 0, scrub_inst = 0;
+ struct edac_dev_data *dev_data;
struct edac_dev_feat_ctx *ctx;
int attr_gcnt = 0;
int ret, feat;
@@ -619,7 +622,10 @@ int edac_dev_register(struct device *parent, char *name,
/* Double parse to make space for attributes */
for (feat = 0; feat < num_features; feat++) {
switch (ras_features[feat].ft_type) {
- /* Add feature specific code */
+ case RAS_FEAT_SCRUB:
+ attr_gcnt++;
+ scrub_cnt++;
+ break;
default:
return -EINVAL;
}
@@ -635,13 +641,35 @@ int edac_dev_register(struct device *parent, char *name,
goto ctx_free;
}
+ if (scrub_cnt) {
+ ctx->scrub = kcalloc(scrub_cnt, sizeof(*ctx->scrub), GFP_KERNEL);
+ if (!ctx->scrub) {
+ ret = -ENOMEM;
+ goto groups_free;
+ }
+ }
+
attr_gcnt = 0;
for (feat = 0; feat < num_features; feat++, ras_features++) {
switch (ras_features->ft_type) {
- /* Add feature specific code */
+ case RAS_FEAT_SCRUB:
+ if (!ras_features->scrub_ops ||
+ scrub_inst != ras_features->instance)
+ goto data_mem_free;
+ dev_data = &ctx->scrub[scrub_inst];
+ dev_data->instance = scrub_inst;
+ dev_data->scrub_ops = ras_features->scrub_ops;
+ dev_data->private = ras_features->ctx;
+ ret = edac_scrub_get_desc(parent, &ras_attr_groups[attr_gcnt],
+ ras_features->instance);
+ if (ret)
+ goto data_mem_free;
+ scrub_inst++;
+ attr_gcnt++;
+ break;
default:
ret = -EINVAL;
- goto groups_free;
+ goto data_mem_free;
}
}
@@ -654,7 +682,7 @@ int edac_dev_register(struct device *parent, char *name,
ret = dev_set_name(&ctx->dev, name);
if (ret)
- goto groups_free;
+ goto data_mem_free;
ret = device_register(&ctx->dev);
if (ret) {
@@ -664,6 +692,8 @@ int edac_dev_register(struct device *parent, char *name,
return devm_add_action_or_reset(parent, edac_dev_unreg, &ctx->dev);
+data_mem_free:
+ kfree(ctx->scrub);
groups_free:
kfree(ras_attr_groups);
ctx_free:
diff --git a/drivers/edac/scrub.c b/drivers/edac/scrub.c
new file mode 100755
index 000000000000..bf76d95382af
--- /dev/null
+++ b/drivers/edac/scrub.c
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Generic EDAC scrub driver in order to control the memory
+ * scrubbers in the system and the common sysfs scrub interface
+ * abstracts the control of an arbitrary scrubbing functionality
+ * to a common set of functions.
+ *
+ * Copyright (c) 2024 HiSilicon Limited.
+ */
+
+#define pr_fmt(fmt) "EDAC SCRUB: " fmt
+
+#include <linux/edac.h>
+
+enum edac_scrub_attributes {
+ SCRUB_ADDRESS,
+ SCRUB_SIZE,
+ SCRUB_ENABLE_BACKGROUND,
+ SCRUB_MIN_CYCLE_DURATION,
+ SCRUB_MAX_CYCLE_DURATION,
+ SCRUB_CUR_CYCLE_DURATION,
+ SCRUB_MAX_ATTRS
+};
+
+struct edac_scrub_dev_attr {
+ struct device_attribute dev_attr;
+ u8 instance;
+};
+
+struct edac_scrub_context {
+ char name[EDAC_FEAT_NAME_LEN];
+ struct edac_scrub_dev_attr scrub_dev_attr[SCRUB_MAX_ATTRS];
+ struct attribute *scrub_attrs[SCRUB_MAX_ATTRS + 1];
+ struct attribute_group group;
+};
+
+#define TO_SCRUB_DEV_ATTR(_dev_attr) \
+ container_of(_dev_attr, struct edac_scrub_dev_attr, dev_attr)
+
+#define EDAC_SCRUB_ATTR_SHOW(attrib, cb, type, format) \
+static ssize_t attrib##_show(struct device *ras_feat_dev, \
+ struct device_attribute *attr, char *buf) \
+{ \
+ u8 inst = TO_SCRUB_DEV_ATTR(attr)->instance; \
+ struct edac_dev_feat_ctx *ctx = dev_get_drvdata(ras_feat_dev); \
+ const struct edac_scrub_ops *ops = ctx->scrub[inst].scrub_ops; \
+ type data; \
+ int ret; \
+ \
+ ret = ops->cb(ras_feat_dev->parent, ctx->scrub[inst].private, &data); \
+ if (ret) \
+ return ret; \
+ \
+ return sysfs_emit(buf, format, data); \
+}
+
+EDAC_SCRUB_ATTR_SHOW(addr, read_addr, u64, "0x%llx\n")
+EDAC_SCRUB_ATTR_SHOW(size, read_size, u64, "0x%llx\n")
+EDAC_SCRUB_ATTR_SHOW(enable_background, get_enabled_bg, bool, "%u\n")
+EDAC_SCRUB_ATTR_SHOW(min_cycle_duration, get_min_cycle, u32, "%u\n")
+EDAC_SCRUB_ATTR_SHOW(max_cycle_duration, get_max_cycle, u32, "%u\n")
+EDAC_SCRUB_ATTR_SHOW(current_cycle_duration, get_cycle_duration, u32, "%u\n")
+
+#define EDAC_SCRUB_ATTR_STORE(attrib, cb, type, conv_func) \
+static ssize_t attrib##_store(struct device *ras_feat_dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t len) \
+{ \
+ u8 inst = TO_SCRUB_DEV_ATTR(attr)->instance; \
+ struct edac_dev_feat_ctx *ctx = dev_get_drvdata(ras_feat_dev); \
+ const struct edac_scrub_ops *ops = ctx->scrub[inst].scrub_ops; \
+ type data; \
+ int ret; \
+ \
+ ret = conv_func(buf, 0, &data); \
+ if (ret < 0) \
+ return ret; \
+ \
+ ret = ops->cb(ras_feat_dev->parent, ctx->scrub[inst].private, data); \
+ if (ret) \
+ return ret; \
+ \
+ return len; \
+}
+
+EDAC_SCRUB_ATTR_STORE(addr, write_addr, u64, kstrtou64)
+EDAC_SCRUB_ATTR_STORE(size, write_size, u64, kstrtou64)
+EDAC_SCRUB_ATTR_STORE(enable_background, set_enabled_bg, unsigned long, kstrtoul)
+EDAC_SCRUB_ATTR_STORE(current_cycle_duration, set_cycle_duration, unsigned long, kstrtoul)
+
+static umode_t scrub_attr_visible(struct kobject *kobj, struct attribute *a, int attr_id)
+{
+ struct device *ras_feat_dev = kobj_to_dev(kobj);
+ struct device_attribute *dev_attr = container_of(a, struct device_attribute, attr);
+ u8 inst = TO_SCRUB_DEV_ATTR(dev_attr)->instance;
+ struct edac_dev_feat_ctx *ctx = dev_get_drvdata(ras_feat_dev);
+ const struct edac_scrub_ops *ops = ctx->scrub[inst].scrub_ops;
+
+ switch (attr_id) {
+ case SCRUB_ADDRESS:
+ if (ops->read_addr) {
+ if (ops->write_addr)
+ return a->mode;
+ else
+ return 0444;
+ }
+ break;
+ case SCRUB_SIZE:
+ if (ops->read_size) {
+ if (ops->write_size)
+ return a->mode;
+ else
+ return 0444;
+ }
+ break;
+ case SCRUB_ENABLE_BACKGROUND:
+ if (ops->get_enabled_bg) {
+ if (ops->set_enabled_bg)
+ return a->mode;
+ else
+ return 0444;
+ }
+ break;
+ case SCRUB_MIN_CYCLE_DURATION:
+ if (ops->get_min_cycle)
+ return a->mode;
+ break;
+ case SCRUB_MAX_CYCLE_DURATION:
+ if (ops->get_max_cycle)
+ return a->mode;
+ break;
+ case SCRUB_CUR_CYCLE_DURATION:
+ if (ops->get_cycle_duration) {
+ if (ops->set_cycle_duration)
+ return a->mode;
+ else
+ return 0444;
+ }
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+#define EDAC_SCRUB_ATTR_RO(_name, _instance) \
+ ((struct edac_scrub_dev_attr) { .dev_attr = __ATTR_RO(_name), \
+ .instance = _instance })
+
+#define EDAC_SCRUB_ATTR_WO(_name, _instance) \
+ ((struct edac_scrub_dev_attr) { .dev_attr = __ATTR_WO(_name), \
+ .instance = _instance })
+
+#define EDAC_SCRUB_ATTR_RW(_name, _instance) \
+ ((struct edac_scrub_dev_attr) { .dev_attr = __ATTR_RW(_name), \
+ .instance = _instance })
+
+static int scrub_create_desc(struct device *scrub_dev,
+ const struct attribute_group **attr_groups, u8 instance)
+{
+ struct edac_scrub_context *scrub_ctx;
+ struct attribute_group *group;
+ int i;
+ struct edac_scrub_dev_attr dev_attr[] = {
+ [SCRUB_ADDRESS] = EDAC_SCRUB_ATTR_RW(addr, instance),
+ [SCRUB_SIZE] = EDAC_SCRUB_ATTR_RW(size, instance),
+ [SCRUB_ENABLE_BACKGROUND] = EDAC_SCRUB_ATTR_RW(enable_background, instance),
+ [SCRUB_MIN_CYCLE_DURATION] = EDAC_SCRUB_ATTR_RO(min_cycle_duration, instance),
+ [SCRUB_MAX_CYCLE_DURATION] = EDAC_SCRUB_ATTR_RO(max_cycle_duration, instance),
+ [SCRUB_CUR_CYCLE_DURATION] = EDAC_SCRUB_ATTR_RW(current_cycle_duration, instance)
+ };
+
+ scrub_ctx = devm_kzalloc(scrub_dev, sizeof(*scrub_ctx), GFP_KERNEL);
+ if (!scrub_ctx)
+ return -ENOMEM;
+
+ group = &scrub_ctx->group;
+ for (i = 0; i < SCRUB_MAX_ATTRS; i++) {
+ memcpy(&scrub_ctx->scrub_dev_attr[i], &dev_attr[i], sizeof(dev_attr[i]));
+ scrub_ctx->scrub_attrs[i] = &scrub_ctx->scrub_dev_attr[i].dev_attr.attr;
+ }
+ sprintf(scrub_ctx->name, "%s%d", "scrub", instance);
+ group->name = scrub_ctx->name;
+ group->attrs = scrub_ctx->scrub_attrs;
+ group->is_visible = scrub_attr_visible;
+
+ attr_groups[0] = group;
+
+ return 0;
+}
+
+/**
+ * edac_scrub_get_desc - get EDAC scrub descriptors
+ * @scrub_dev: client device, with scrub support
+ * @attr_groups: pointer to attribute group container
+ * @instance: device's scrub instance number.
+ *
+ * Return:
+ * * %0 - Success.
+ * * %-EINVAL - Invalid parameters passed.
+ * * %-ENOMEM - Dynamic memory allocation failed.
+ */
+int edac_scrub_get_desc(struct device *scrub_dev,
+ const struct attribute_group **attr_groups, u8 instance)
+{
+ if (!scrub_dev || !attr_groups)
+ return -EINVAL;
+
+ return scrub_create_desc(scrub_dev, attr_groups, instance);
+}
diff --git a/include/linux/edac.h b/include/linux/edac.h
index e19706311ec0..3620a09c0476 100644
--- a/include/linux/edac.h
+++ b/include/linux/edac.h
@@ -668,11 +668,43 @@ static inline struct dimm_info *edac_get_dimm(struct mem_ctl_info *mci,
/* RAS feature type */
enum edac_dev_feat {
+ RAS_FEAT_SCRUB,
RAS_FEAT_MAX
};
+/**
+ * struct edac_scrub_ops - scrub device operations (all elements optional)
+ * @read_addr: read base address of scrubbing range.
+ * @read_size: read offset of scrubbing range.
+ * @write_addr: set base address of the scrubbing range.
+ * @write_size: set offset of the scrubbing range.
+ * @get_enabled_bg: check if currently performing background scrub.
+ * @set_enabled_bg: start or stop a bg-scrub.
+ * @get_min_cycle: get minimum supported scrub cycle duration in seconds.
+ * @get_max_cycle: get maximum supported scrub cycle duration in seconds.
+ * @get_cycle_duration: get current scrub cycle duration in seconds.
+ * @set_cycle_duration: set current scrub cycle duration in seconds.
+ */
+struct edac_scrub_ops {
+ int (*read_addr)(struct device *dev, void *drv_data, u64 *base);
+ int (*read_size)(struct device *dev, void *drv_data, u64 *size);
+ int (*write_addr)(struct device *dev, void *drv_data, u64 base);
+ int (*write_size)(struct device *dev, void *drv_data, u64 size);
+ int (*get_enabled_bg)(struct device *dev, void *drv_data, bool *enable);
+ int (*set_enabled_bg)(struct device *dev, void *drv_data, bool enable);
+ int (*get_min_cycle)(struct device *dev, void *drv_data, u32 *min);
+ int (*get_max_cycle)(struct device *dev, void *drv_data, u32 *max);
+ int (*get_cycle_duration)(struct device *dev, void *drv_data, u32 *cycle);
+ int (*set_cycle_duration)(struct device *dev, void *drv_data, u32 cycle);
+};
+
+int edac_scrub_get_desc(struct device *scrub_dev,
+ const struct attribute_group **attr_groups,
+ u8 instance);
+
/* EDAC device feature information structure */
struct edac_dev_data {
+ const struct edac_scrub_ops *scrub_ops;
u8 instance;
void *private;
};
@@ -680,11 +712,13 @@ struct edac_dev_data {
struct edac_dev_feat_ctx {
struct device dev;
void *private;
+ struct edac_dev_data *scrub;
};
struct edac_dev_feature {
enum edac_dev_feat ft_type;
u8 instance;
+ const struct edac_scrub_ops *scrub_ops;
void *ctx;
};
--
2.34.1
^ permalink raw reply [flat|nested] 30+ messages in thread
* [PATCH v14 03/14] EDAC: Add ECS control feature
2024-10-25 17:13 [PATCH v14 00/14] EDAC: Scrub: introduce generic EDAC RAS control feature driver + CXL/ACPI-RAS2 drivers shiju.jose
2024-10-25 17:13 ` [PATCH v14 01/14] EDAC: Add support for EDAC device features control shiju.jose
2024-10-25 17:13 ` [PATCH v14 02/14] EDAC: Add scrub control feature shiju.jose
@ 2024-10-25 17:13 ` shiju.jose
2024-10-28 11:16 ` Borislav Petkov
2024-10-25 17:13 ` [PATCH v14 04/14] cxl: Add Get Supported Features command for kernel usage shiju.jose
` (11 subsequent siblings)
14 siblings, 1 reply; 30+ messages in thread
From: shiju.jose @ 2024-10-25 17:13 UTC (permalink / raw)
To: linux-edac, linux-cxl, linux-acpi, linux-mm, linux-kernel
Cc: bp, tony.luck, rafael, lenb, mchehab, dan.j.williams, dave,
jonathan.cameron, gregkh, sudeep.holla, jassisinghbrar,
dave.jiang, alison.schofield, vishal.l.verma, ira.weiny, david,
Vilas.Sridharan, leo.duran, Yazen.Ghannam, rientjes, jiaqiyan,
Jon.Grimm, dave.hansen, naoya.horiguchi, james.morse, jthoughton,
somasundaram.a, erdemaktas, pgonda, duenwen, gthelen, wschwartz,
dferguson, wbs, nifan.cxl, yazen.ghannam, tanxiaofei, prime.zeng,
roberto.sassu, kangkang.shen, wanghuiqiang, linuxarm, shiju.jose
From: Shiju Jose <shiju.jose@huawei.com>
Add EDAC ECS (Error Check Scrub) control to manage a memory device's
ECS feature.
The Error Check Scrub (ECS) is a feature defined in JEDEC DDR5 SDRAM
Specification (JESD79-5) and allows the DRAM to internally read, correct
single-bit errors, and write back corrected data bits to the DRAM array
while providing transparency to error counts.
The DDR5 device contains number of memory media FRUs per device. The
DDR5 ECS feature and thus the ECS control driver supports configuring
the ECS parameters per FRU.
Memory devices support the ECS feature register with the EDAC device
driver, which retrieves the ECS descriptor from the EDAC ECS driver.
This driver exposes sysfs ECS control attributes to userspace via
/sys/bus/edac/devices/<dev-name>/ecs_fruX/.
The common sysfs ECS control interface abstracts the control of an
arbitrary ECS functionality to a common set of functions.
Support for the ECS feature is added separately because the control
attributes of the DDR5 ECS feature differ from those of the scrub
feature.
The sysfs ECS attribute nodes are only present if the client driver
has implemented the corresponding attribute callback function and
passed the necessary operations to the EDAC RAS feature driver during
registration.
Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
---
Documentation/ABI/testing/sysfs-edac-ecs | 76 +++++++
drivers/edac/Makefile | 2 +-
drivers/edac/ecs.c | 240 +++++++++++++++++++++++
drivers/edac/edac_device.c | 15 ++
include/linux/edac.h | 51 ++++-
5 files changed, 381 insertions(+), 3 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-edac-ecs
create mode 100755 drivers/edac/ecs.c
diff --git a/Documentation/ABI/testing/sysfs-edac-ecs b/Documentation/ABI/testing/sysfs-edac-ecs
new file mode 100644
index 000000000000..b94cc09f9222
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-edac-ecs
@@ -0,0 +1,76 @@
+What: /sys/bus/edac/devices/<dev-name>/ecs_fruX
+Date: Jan 2025
+KernelVersion: 6.13
+Contact: linux-edac@vger.kernel.org
+Description:
+ The sysfs EDAC bus devices /<dev-name>/ecs_fruX subdirectory
+ belongs to the memory media ECS (Error Check Scrub) control
+ feature, where <dev-name> directory corresponds to a device
+ registered with the EDAC device driver for the ECS feature.
+ /ecs_fruX belongs to the media FRUs (Field Replaceable Unit)
+ under the memory device.
+ The sysfs ECS attr nodes are only present if the client
+ driver has implemented the corresponding attr callback
+ function and passed in ops to the EDAC RAS feature driver
+ during registration.
+
+What: /sys/bus/edac/devices/<dev-name>/ecs_fruX/log_entry_type
+Date: Jan 2025
+KernelVersion: 6.13
+Contact: linux-edac@vger.kernel.org
+Description:
+ (RW) The log entry type of how the DDR5 ECS log is reported.
+ 00b - per DRAM.
+ 01b - per memory media FRU.
+
+What: /sys/bus/edac/devices/<dev-name>/ecs_fruX/log_entry_type_per_dram
+Date: Jan 2025
+KernelVersion: 6.13
+Contact: linux-edac@vger.kernel.org
+Description:
+ (RO) True if current log entry type is per DRAM.
+
+What: /sys/bus/edac/devices/<dev-name>/ecs_fruX/log_entry_type_per_memory_media
+Date: Jan 2025
+KernelVersion: 6.13
+Contact: linux-edac@vger.kernel.org
+Description:
+ (RO) True if current log entry type is per memory media FRU.
+
+What: /sys/bus/edac/devices/<dev-name>/ecs_fruX/mode
+Date: Jan 2025
+KernelVersion: 6.13
+Contact: linux-edac@vger.kernel.org
+Description:
+ (RW) The mode of how the DDR5 ECS counts the errors.
+ 0 - ECS counts rows with errors.
+ 1 - ECS counts codewords with errors.
+
+What: /sys/bus/edac/devices/<dev-name>/ecs_fruX/mode_counts_rows
+Date: Jan 2025
+KernelVersion: 6.13
+Contact: linux-edac@vger.kernel.org
+Description:
+ (RO) True if current mode is ECS counts rows with errors.
+
+What: /sys/bus/edac/devices/<dev-name>/ecs_fruX/mode_counts_codewords
+Date: Jan 2025
+KernelVersion: 6.13
+Contact: linux-edac@vger.kernel.org
+Description:
+ (RO) True if current mode is ECS counts codewords with errors.
+
+What: /sys/bus/edac/devices/<dev-name>/ecs_fruX/reset
+Date: Jan 2025
+KernelVersion: 6.13
+Contact: linux-edac@vger.kernel.org
+Description:
+ (WO) ECS reset ECC counter.
+ 1 - reset ECC counter to the default value.
+
+What: /sys/bus/edac/devices/<dev-name>/ecs_fruX/threshold
+Date: Jan 2025
+KernelVersion: 6.13
+Contact: linux-edac@vger.kernel.org
+Description:
+ (RW) ECS threshold count per gigabits of memory cells.
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index 188501e676c7..b24c2c112d9c 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -10,7 +10,7 @@ obj-$(CONFIG_EDAC) := edac_core.o
edac_core-y := edac_mc.o edac_device.o edac_mc_sysfs.o
edac_core-y += edac_module.o edac_device_sysfs.o wq.o
-edac_core-y += scrub.o
+edac_core-y += scrub.o ecs.o
edac_core-$(CONFIG_EDAC_DEBUG) += debugfs.o
diff --git a/drivers/edac/ecs.c b/drivers/edac/ecs.c
new file mode 100755
index 000000000000..a2b64d7bf6b6
--- /dev/null
+++ b/drivers/edac/ecs.c
@@ -0,0 +1,240 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Generic ECS driver in order to support control the on die
+ * error check scrub (e.g. DDR5 ECS). The common sysfs ECS
+ * interface abstracts the control of an arbitrary ECS
+ * functionality to a common set of functions.
+ *
+ * Copyright (c) 2024 HiSilicon Limited.
+ */
+
+#define pr_fmt(fmt) "EDAC ECS: " fmt
+
+#include <linux/edac.h>
+
+#define EDAC_ECS_FRU_NAME "ecs_fru"
+
+enum edac_ecs_attributes {
+ ECS_LOG_ENTRY_TYPE,
+ ECS_LOG_ENTRY_TYPE_PER_DRAM,
+ ECS_LOG_ENTRY_TYPE_PER_MEMORY_MEDIA,
+ ECS_MODE,
+ ECS_MODE_COUNTS_ROWS,
+ ECS_MODE_COUNTS_CODEWORDS,
+ ECS_RESET,
+ ECS_THRESHOLD,
+ ECS_MAX_ATTRS
+};
+
+struct edac_ecs_dev_attr {
+ struct device_attribute dev_attr;
+ int fru_id;
+};
+
+struct edac_ecs_fru_context {
+ char name[EDAC_FEAT_NAME_LEN];
+ struct edac_ecs_dev_attr ecs_dev_attr[ECS_MAX_ATTRS];
+ struct attribute *ecs_attrs[ECS_MAX_ATTRS + 1];
+ struct attribute_group group;
+};
+
+struct edac_ecs_context {
+ u16 num_media_frus;
+ struct edac_ecs_fru_context *fru_ctxs;
+};
+
+#define TO_ECS_DEV_ATTR(_dev_attr) \
+ container_of(_dev_attr, struct edac_ecs_dev_attr, dev_attr)
+
+#define EDAC_ECS_ATTR_SHOW(attrib, cb, type, format) \
+static ssize_t attrib##_show(struct device *ras_feat_dev, \
+ struct device_attribute *attr, char *buf) \
+{ \
+ struct edac_ecs_dev_attr *ecs_dev_attr = TO_ECS_DEV_ATTR(attr); \
+ struct edac_dev_feat_ctx *ctx = dev_get_drvdata(ras_feat_dev); \
+ const struct edac_ecs_ops *ops = ctx->ecs.ecs_ops; \
+ type data; \
+ int ret; \
+ \
+ ret = ops->cb(ras_feat_dev->parent, ctx->ecs.private, \
+ ecs_dev_attr->fru_id, &data); \
+ if (ret) \
+ return ret; \
+ \
+ return sysfs_emit(buf, format, data); \
+}
+
+EDAC_ECS_ATTR_SHOW(log_entry_type, get_log_entry_type, u32, "%u\n")
+EDAC_ECS_ATTR_SHOW(log_entry_type_per_dram, get_log_entry_type_per_dram, u32, "%u\n")
+EDAC_ECS_ATTR_SHOW(log_entry_type_per_memory_media, get_log_entry_type_per_memory_media,
+ u32, "%u\n")
+EDAC_ECS_ATTR_SHOW(mode, get_mode, u32, "%u\n")
+EDAC_ECS_ATTR_SHOW(mode_counts_rows, get_mode_counts_rows, u32, "%u\n")
+EDAC_ECS_ATTR_SHOW(mode_counts_codewords, get_mode_counts_codewords, u32, "%u\n")
+EDAC_ECS_ATTR_SHOW(threshold, get_threshold, u32, "%u\n")
+
+#define EDAC_ECS_ATTR_STORE(attrib, cb, type, conv_func) \
+static ssize_t attrib##_store(struct device *ras_feat_dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t len) \
+{ \
+ struct edac_ecs_dev_attr *ecs_dev_attr = TO_ECS_DEV_ATTR(attr); \
+ struct edac_dev_feat_ctx *ctx = dev_get_drvdata(ras_feat_dev); \
+ const struct edac_ecs_ops *ops = ctx->ecs.ecs_ops; \
+ type data; \
+ int ret; \
+ \
+ ret = conv_func(buf, 0, &data); \
+ if (ret < 0) \
+ return ret; \
+ \
+ ret = ops->cb(ras_feat_dev->parent, ctx->ecs.private, \
+ ecs_dev_attr->fru_id, data); \
+ if (ret) \
+ return ret; \
+ \
+ return len; \
+}
+
+EDAC_ECS_ATTR_STORE(log_entry_type, set_log_entry_type, unsigned long, kstrtoul)
+EDAC_ECS_ATTR_STORE(mode, set_mode, unsigned long, kstrtoul)
+EDAC_ECS_ATTR_STORE(reset, reset, unsigned long, kstrtoul)
+EDAC_ECS_ATTR_STORE(threshold, set_threshold, unsigned long, kstrtoul)
+
+static umode_t ecs_attr_visible(struct kobject *kobj, struct attribute *a, int attr_id)
+{
+ struct device *ras_feat_dev = kobj_to_dev(kobj);
+ struct edac_dev_feat_ctx *ctx = dev_get_drvdata(ras_feat_dev);
+ const struct edac_ecs_ops *ops = ctx->ecs.ecs_ops;
+
+ switch (attr_id) {
+ case ECS_LOG_ENTRY_TYPE:
+ if (ops->get_log_entry_type) {
+ if (ops->set_log_entry_type)
+ return a->mode;
+ else
+ return 0444;
+ }
+ break;
+ case ECS_LOG_ENTRY_TYPE_PER_DRAM:
+ if (ops->get_log_entry_type_per_dram)
+ return a->mode;
+ break;
+ case ECS_LOG_ENTRY_TYPE_PER_MEMORY_MEDIA:
+ if (ops->get_log_entry_type_per_memory_media)
+ return a->mode;
+ break;
+ case ECS_MODE:
+ if (ops->get_mode) {
+ if (ops->set_mode)
+ return a->mode;
+ else
+ return 0444;
+ }
+ break;
+ case ECS_MODE_COUNTS_ROWS:
+ if (ops->get_mode_counts_rows)
+ return a->mode;
+ break;
+ case ECS_MODE_COUNTS_CODEWORDS:
+ if (ops->get_mode_counts_codewords)
+ return a->mode;
+ break;
+ case ECS_RESET:
+ if (ops->reset)
+ return a->mode;
+ break;
+ case ECS_THRESHOLD:
+ if (ops->get_threshold) {
+ if (ops->set_threshold)
+ return a->mode;
+ else
+ return 0444;
+ }
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+#define EDAC_ECS_ATTR_RO(_name, _fru_id) \
+ ((struct edac_ecs_dev_attr) { .dev_attr = __ATTR_RO(_name), \
+ .fru_id = _fru_id })
+
+#define EDAC_ECS_ATTR_WO(_name, _fru_id) \
+ ((struct edac_ecs_dev_attr) { .dev_attr = __ATTR_WO(_name), \
+ .fru_id = _fru_id })
+
+#define EDAC_ECS_ATTR_RW(_name, _fru_id) \
+ ((struct edac_ecs_dev_attr) { .dev_attr = __ATTR_RW(_name), \
+ .fru_id = _fru_id })
+
+static int ecs_create_desc(struct device *ecs_dev,
+ const struct attribute_group **attr_groups, u16 num_media_frus)
+{
+ struct edac_ecs_context *ecs_ctx;
+ u32 fru;
+
+ ecs_ctx = devm_kzalloc(ecs_dev, sizeof(*ecs_ctx), GFP_KERNEL);
+ if (!ecs_ctx)
+ return -ENOMEM;
+
+ ecs_ctx->num_media_frus = num_media_frus;
+ ecs_ctx->fru_ctxs = devm_kcalloc(ecs_dev, num_media_frus,
+ sizeof(*ecs_ctx->fru_ctxs),
+ GFP_KERNEL);
+ if (!ecs_ctx->fru_ctxs)
+ return -ENOMEM;
+
+ for (fru = 0; fru < num_media_frus; fru++) {
+ struct edac_ecs_fru_context *fru_ctx = &ecs_ctx->fru_ctxs[fru];
+ struct attribute_group *group = &fru_ctx->group;
+ int i;
+
+ fru_ctx->ecs_dev_attr[ECS_LOG_ENTRY_TYPE] = EDAC_ECS_ATTR_RW(log_entry_type, fru);
+ fru_ctx->ecs_dev_attr[ECS_LOG_ENTRY_TYPE_PER_DRAM] =
+ EDAC_ECS_ATTR_RO(log_entry_type_per_dram, fru);
+ fru_ctx->ecs_dev_attr[ECS_LOG_ENTRY_TYPE_PER_MEMORY_MEDIA] =
+ EDAC_ECS_ATTR_RO(log_entry_type_per_memory_media, fru);
+ fru_ctx->ecs_dev_attr[ECS_MODE] = EDAC_ECS_ATTR_RW(mode, fru);
+ fru_ctx->ecs_dev_attr[ECS_MODE_COUNTS_ROWS] =
+ EDAC_ECS_ATTR_RO(mode_counts_rows, fru);
+ fru_ctx->ecs_dev_attr[ECS_MODE_COUNTS_CODEWORDS] =
+ EDAC_ECS_ATTR_RO(mode_counts_codewords, fru);
+ fru_ctx->ecs_dev_attr[ECS_RESET] = EDAC_ECS_ATTR_WO(reset, fru);
+ fru_ctx->ecs_dev_attr[ECS_THRESHOLD] = EDAC_ECS_ATTR_RW(threshold, fru);
+ for (i = 0; i < ECS_MAX_ATTRS; i++)
+ fru_ctx->ecs_attrs[i] = &fru_ctx->ecs_dev_attr[i].dev_attr.attr;
+
+ sprintf(fru_ctx->name, "%s%d", EDAC_ECS_FRU_NAME, fru);
+ group->name = fru_ctx->name;
+ group->attrs = fru_ctx->ecs_attrs;
+ group->is_visible = ecs_attr_visible;
+
+ attr_groups[fru] = group;
+ }
+
+ return 0;
+}
+
+/**
+ * edac_ecs_get_desc - get EDAC ECS descriptors
+ * @ecs_dev: client device, supports ECS feature
+ * @attr_groups: pointer to attribute group container
+ * @num_media_frus: number of media FRUs in the device
+ *
+ * Return:
+ * * %0 - Success.
+ * * %-EINVAL - Invalid parameters passed.
+ * * %-ENOMEM - Dynamic memory allocation failed.
+ */
+int edac_ecs_get_desc(struct device *ecs_dev,
+ const struct attribute_group **attr_groups, u16 num_media_frus)
+{
+ if (!ecs_dev || !attr_groups || !num_media_frus)
+ return -EINVAL;
+
+ return ecs_create_desc(ecs_dev, attr_groups, num_media_frus);
+}
diff --git a/drivers/edac/edac_device.c b/drivers/edac/edac_device.c
index 91552271b34a..5fc3ec7f25eb 100644
--- a/drivers/edac/edac_device.c
+++ b/drivers/edac/edac_device.c
@@ -626,6 +626,9 @@ int edac_dev_register(struct device *parent, char *name,
attr_gcnt++;
scrub_cnt++;
break;
+ case RAS_FEAT_ECS:
+ attr_gcnt += ras_features[feat].ecs_info.num_media_frus;
+ break;
default:
return -EINVAL;
}
@@ -667,6 +670,18 @@ int edac_dev_register(struct device *parent, char *name,
scrub_inst++;
attr_gcnt++;
break;
+ case RAS_FEAT_ECS:
+ if (!ras_features->ecs_ops)
+ goto data_mem_free;
+ dev_data = &ctx->ecs;
+ dev_data->ecs_ops = ras_features->ecs_ops;
+ dev_data->private = ras_features->ctx;
+ ret = edac_ecs_get_desc(parent, &ras_attr_groups[attr_gcnt],
+ ras_features->ecs_info.num_media_frus);
+ if (ret)
+ goto data_mem_free;
+ attr_gcnt += ras_features->ecs_info.num_media_frus;
+ break;
default:
ret = -EINVAL;
goto data_mem_free;
diff --git a/include/linux/edac.h b/include/linux/edac.h
index 3620a09c0476..077d3c252e99 100644
--- a/include/linux/edac.h
+++ b/include/linux/edac.h
@@ -669,6 +669,7 @@ static inline struct dimm_info *edac_get_dimm(struct mem_ctl_info *mci,
/* RAS feature type */
enum edac_dev_feat {
RAS_FEAT_SCRUB,
+ RAS_FEAT_ECS,
RAS_FEAT_MAX
};
@@ -702,9 +703,50 @@ int edac_scrub_get_desc(struct device *scrub_dev,
const struct attribute_group **attr_groups,
u8 instance);
+/**
+ * struct edac_ecs_ops - ECS device operations (all elements optional)
+ * @get_log_entry_type: read the log entry type value.
+ * @set_log_entry_type: set the log entry type value.
+ * @get_log_entry_type_per_dram: read the log entry type per dram value.
+ * @get_log_entry_type_memory_media: read the log entry type per memory media value.
+ * @get_mode: read the mode value.
+ * @set_mode: set the mode value.
+ * @get_mode_counts_rows: read the mode counts rows value.
+ * @get_mode_counts_codewords: read the mode counts codewords value.
+ * @reset: reset the ECS counter.
+ * @get_threshold: read the threshold count per gigabits of memory cells.
+ * @set_threshold: set the threshold count per gigabits of memory cells.
+ */
+struct edac_ecs_ops {
+ int (*get_log_entry_type)(struct device *dev, void *drv_data, int fru_id, u32 *val);
+ int (*set_log_entry_type)(struct device *dev, void *drv_data, int fru_id, u32 val);
+ int (*get_log_entry_type_per_dram)(struct device *dev, void *drv_data,
+ int fru_id, u32 *val);
+ int (*get_log_entry_type_per_memory_media)(struct device *dev, void *drv_data,
+ int fru_id, u32 *val);
+ int (*get_mode)(struct device *dev, void *drv_data, int fru_id, u32 *val);
+ int (*set_mode)(struct device *dev, void *drv_data, int fru_id, u32 val);
+ int (*get_mode_counts_rows)(struct device *dev, void *drv_data, int fru_id, u32 *val);
+ int (*get_mode_counts_codewords)(struct device *dev, void *drv_data, int fru_id, u32 *val);
+ int (*reset)(struct device *dev, void *drv_data, int fru_id, u32 val);
+ int (*get_threshold)(struct device *dev, void *drv_data, int fru_id, u32 *threshold);
+ int (*set_threshold)(struct device *dev, void *drv_data, int fru_id, u32 threshold);
+};
+
+struct edac_ecs_ex_info {
+ u16 num_media_frus;
+};
+
+int edac_ecs_get_desc(struct device *ecs_dev,
+ const struct attribute_group **attr_groups,
+ u16 num_media_frus);
+
/* EDAC device feature information structure */
struct edac_dev_data {
- const struct edac_scrub_ops *scrub_ops;
+ union {
+ const struct edac_scrub_ops *scrub_ops;
+ const struct edac_ecs_ops *ecs_ops;
+ };
u8 instance;
void *private;
};
@@ -713,13 +755,18 @@ struct edac_dev_feat_ctx {
struct device dev;
void *private;
struct edac_dev_data *scrub;
+ struct edac_dev_data ecs;
};
struct edac_dev_feature {
enum edac_dev_feat ft_type;
u8 instance;
- const struct edac_scrub_ops *scrub_ops;
+ union {
+ const struct edac_scrub_ops *scrub_ops;
+ const struct edac_ecs_ops *ecs_ops;
+ };
void *ctx;
+ struct edac_ecs_ex_info ecs_info;
};
int edac_dev_register(struct device *parent, char *dev_name,
--
2.34.1
^ permalink raw reply [flat|nested] 30+ messages in thread
* [PATCH v14 04/14] cxl: Add Get Supported Features command for kernel usage
2024-10-25 17:13 [PATCH v14 00/14] EDAC: Scrub: introduce generic EDAC RAS control feature driver + CXL/ACPI-RAS2 drivers shiju.jose
` (2 preceding siblings ...)
2024-10-25 17:13 ` [PATCH v14 03/14] EDAC: Add ECS " shiju.jose
@ 2024-10-25 17:13 ` shiju.jose
2024-10-25 17:13 ` [PATCH v14 05/14] cxl/mbox: Add GET_FEATURE mailbox command shiju.jose
` (10 subsequent siblings)
14 siblings, 0 replies; 30+ messages in thread
From: shiju.jose @ 2024-10-25 17:13 UTC (permalink / raw)
To: linux-edac, linux-cxl, linux-acpi, linux-mm, linux-kernel
Cc: bp, tony.luck, rafael, lenb, mchehab, dan.j.williams, dave,
jonathan.cameron, gregkh, sudeep.holla, jassisinghbrar,
dave.jiang, alison.schofield, vishal.l.verma, ira.weiny, david,
Vilas.Sridharan, leo.duran, Yazen.Ghannam, rientjes, jiaqiyan,
Jon.Grimm, dave.hansen, naoya.horiguchi, james.morse, jthoughton,
somasundaram.a, erdemaktas, pgonda, duenwen, gthelen, wschwartz,
dferguson, wbs, nifan.cxl, yazen.ghannam, tanxiaofei, prime.zeng,
roberto.sassu, kangkang.shen, wanghuiqiang, linuxarm, shiju.jose
From: Dave Jiang <dave.jiang@intel.com>
CXL spec r3.1 8.2.9.6.1 Get Supported Features (Opcode 0500h)
The command retrieve the list of supported device-specific features
(identified by UUID) and general information about each Feature.
The driver will retrieve the feature entries in order to make checks and
provide information for the Get Feature and Set Feature command. One of
the main piece of information retrieved are the effects a Set Feature
command would have for a particular feature.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
---
drivers/cxl/core/mbox.c | 175 +++++++++++++++++++++++++++++++++++
drivers/cxl/cxlmem.h | 47 ++++++++++
drivers/cxl/pci.c | 4 +
include/cxl/mailbox.h | 4 +
include/uapi/linux/cxl_mem.h | 1 +
5 files changed, 231 insertions(+)
diff --git a/drivers/cxl/core/mbox.c b/drivers/cxl/core/mbox.c
index 5175138c4fb7..5045960e3bfe 100644
--- a/drivers/cxl/core/mbox.c
+++ b/drivers/cxl/core/mbox.c
@@ -67,6 +67,7 @@ static struct cxl_mem_command cxl_mem_commands[CXL_MEM_COMMAND_ID_MAX] = {
CXL_CMD(SET_SHUTDOWN_STATE, 0x1, 0, 0),
CXL_CMD(GET_SCAN_MEDIA_CAPS, 0x10, 0x4, 0),
CXL_CMD(GET_TIMESTAMP, 0, 0x8, 0),
+ CXL_CMD(GET_SUPPORTED_FEATURES, 0x8, CXL_VARIABLE_PAYLOAD, 0),
};
/*
@@ -795,6 +796,180 @@ static const uuid_t log_uuid[] = {
[VENDOR_DEBUG_UUID] = DEFINE_CXL_VENDOR_DEBUG_UUID,
};
+static void cxl_free_features(void *features)
+{
+ kvfree(features);
+}
+
+static int cxl_get_supported_features_count(struct cxl_dev_state *cxlds)
+{
+ struct cxl_mailbox *cxl_mbox = &cxlds->cxl_mbox;
+ struct cxl_mbox_get_sup_feats_out mbox_out;
+ struct cxl_mbox_get_sup_feats_in mbox_in;
+ struct cxl_mbox_cmd mbox_cmd;
+ int rc;
+
+ memset(&mbox_in, 0, sizeof(mbox_in));
+ mbox_in.count = sizeof(mbox_out);
+ memset(&mbox_out, 0, sizeof(mbox_out));
+ mbox_cmd = (struct cxl_mbox_cmd) {
+ .opcode = CXL_MBOX_OP_GET_SUPPORTED_FEATURES,
+ .size_in = sizeof(mbox_in),
+ .payload_in = &mbox_in,
+ .size_out = sizeof(mbox_out),
+ .payload_out = &mbox_out,
+ .min_out = sizeof(mbox_out),
+ };
+ rc = cxl_internal_send_cmd(cxl_mbox, &mbox_cmd);
+ if (rc < 0)
+ return rc;
+
+ cxl_mbox->num_features = le16_to_cpu(mbox_out.supported_feats);
+ if (!cxl_mbox->num_features)
+ return -ENOENT;
+
+ return 0;
+}
+
+int cxl_get_supported_features(struct cxl_memdev_state *mds)
+{
+ int remain_feats, max_size, max_feats, start, rc;
+ struct cxl_dev_state *cxlds = &mds->cxlds;
+ struct cxl_mailbox *cxl_mbox = &cxlds->cxl_mbox;
+ int feat_size = sizeof(struct cxl_feat_entry);
+ struct cxl_mbox_get_sup_feats_out *mbox_out;
+ struct cxl_mbox_get_sup_feats_in mbox_in;
+ int hdr_size = sizeof(*mbox_out);
+ struct cxl_mbox_cmd mbox_cmd;
+ struct cxl_mem_command *cmd;
+ void *ptr;
+
+ /* Get supported features is optional, need to check */
+ cmd = cxl_mem_find_command(CXL_MBOX_OP_GET_SUPPORTED_FEATURES);
+ if (!cmd)
+ return -EOPNOTSUPP;
+ if (!test_bit(cmd->info.id, mds->enabled_cmds))
+ return -EOPNOTSUPP;
+
+ rc = cxl_get_supported_features_count(cxlds);
+ if (rc)
+ return rc;
+
+ struct cxl_feat_entry *entries __free(kvfree) =
+ kvmalloc(cxl_mbox->num_features * feat_size, GFP_KERNEL);
+
+ if (!entries)
+ return -ENOMEM;
+
+ cxl_mbox->entries = no_free_ptr(entries);
+ rc = devm_add_action_or_reset(cxl_mbox->host, cxl_free_features,
+ cxl_mbox->entries);
+ if (rc)
+ return rc;
+
+ max_size = cxl_mbox->payload_size - hdr_size;
+ /* max feat entries that can fit in mailbox max payload size */
+ max_feats = max_size / feat_size;
+ ptr = &cxl_mbox->entries[0];
+
+ mbox_out = kvmalloc(cxl_mbox->payload_size, GFP_KERNEL);
+ if (!mbox_out)
+ return -ENOMEM;
+
+ start = 0;
+ remain_feats = cxl_mbox->num_features;
+ do {
+ int retrieved, alloc_size, copy_feats;
+
+ if (remain_feats > max_feats) {
+ alloc_size = sizeof(*mbox_out) + max_feats * feat_size;
+ remain_feats = remain_feats - max_feats;
+ copy_feats = max_feats;
+ } else {
+ alloc_size = sizeof(*mbox_out) + remain_feats * feat_size;
+ copy_feats = remain_feats;
+ remain_feats = 0;
+ }
+
+ memset(&mbox_in, 0, sizeof(mbox_in));
+ mbox_in.count = alloc_size;
+ mbox_in.start_idx = start;
+ memset(mbox_out, 0, alloc_size);
+ mbox_cmd = (struct cxl_mbox_cmd) {
+ .opcode = CXL_MBOX_OP_GET_SUPPORTED_FEATURES,
+ .size_in = sizeof(mbox_in),
+ .payload_in = &mbox_in,
+ .size_out = alloc_size,
+ .payload_out = mbox_out,
+ .min_out = hdr_size,
+ };
+ rc = cxl_internal_send_cmd(cxl_mbox, &mbox_cmd);
+ if (rc < 0)
+ goto err;
+ if (mbox_cmd.size_out <= hdr_size) {
+ rc = -ENXIO;
+ goto err;
+ }
+
+ /*
+ * Make sure retrieved out buffer is multiple of feature
+ * entries.
+ */
+ retrieved = mbox_cmd.size_out - hdr_size;
+ if (retrieved % feat_size) {
+ rc = -ENXIO;
+ goto err;
+ }
+
+ /*
+ * If the reported output entries * defined entry size !=
+ * retrieved output bytes, then the output package is incorrect.
+ */
+ if (mbox_out->num_entries * feat_size != retrieved) {
+ rc = -ENXIO;
+ goto err;
+ }
+
+ memcpy(ptr, mbox_out->ents, retrieved);
+ ptr += retrieved;
+ /*
+ * If the number of output entries is less than expected, add the
+ * remaining entries to the next batch.
+ */
+ remain_feats += copy_feats - mbox_out->num_entries;
+ start += mbox_out->num_entries;
+ } while (remain_feats);
+
+ kfree(mbox_out);
+ return 0;
+
+err:
+ kfree(mbox_out);
+ cxl_mbox->num_features = 0;
+ return rc;
+}
+EXPORT_SYMBOL_NS_GPL(cxl_get_supported_features, CXL);
+
+int cxl_get_supported_feature_entry(struct cxl_memdev_state *mds, const uuid_t *feat_uuid,
+ struct cxl_feat_entry *feat_entry_out)
+{
+ struct cxl_dev_state *cxlds = &mds->cxlds;
+ struct cxl_feat_entry *feat_entry;
+ int count;
+
+ /* Check CXL dev supports the feature */
+ feat_entry = &cxlds->cxl_mbox.entries[0];
+ for (count = 0; count < cxlds->cxl_mbox.num_features; count++, feat_entry++) {
+ if (uuid_equal(&feat_entry->uuid, feat_uuid)) {
+ memcpy(feat_entry_out, feat_entry, sizeof(*feat_entry_out));
+ return 0;
+ }
+ }
+
+ return -EOPNOTSUPP;
+}
+EXPORT_SYMBOL_NS_GPL(cxl_get_supported_feature_entry, CXL);
+
/**
* cxl_enumerate_cmds() - Enumerate commands for a device.
* @mds: The driver data for the operation
diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
index 2a25d1957ddb..f88b10188632 100644
--- a/drivers/cxl/cxlmem.h
+++ b/drivers/cxl/cxlmem.h
@@ -530,6 +530,7 @@ enum cxl_opcode {
CXL_MBOX_OP_GET_LOG_CAPS = 0x0402,
CXL_MBOX_OP_CLEAR_LOG = 0x0403,
CXL_MBOX_OP_GET_SUP_LOG_SUBLIST = 0x0405,
+ CXL_MBOX_OP_GET_SUPPORTED_FEATURES = 0x0500,
CXL_MBOX_OP_IDENTIFY = 0x4000,
CXL_MBOX_OP_GET_PARTITION_INFO = 0x4100,
CXL_MBOX_OP_SET_PARTITION_INFO = 0x4101,
@@ -813,6 +814,48 @@ enum {
CXL_PMEM_SEC_PASS_USER,
};
+/* Get Supported Features (0x500h) CXL r3.1 8.2.9.6.1 */
+struct cxl_mbox_get_sup_feats_in {
+ __le32 count;
+ __le16 start_idx;
+ u8 reserved[2];
+} __packed;
+
+/* Supported Feature Entry : Payload out attribute flags */
+#define CXL_FEAT_ENTRY_FLAG_CHANGABLE BIT(0)
+#define CXL_FEAT_ENTRY_FLAG_DEEPEST_RESET_PERSISTENCE_MASK GENMASK(3, 1)
+#define CXL_FEAT_ENTRY_FLAG_PERSIST_ACROSS_FIRMWARE_UPDATE BIT(4)
+#define CXL_FEAT_ENTRY_FLAG_SUPPORT_DEFAULT_SELECTION BIT(5)
+#define CXL_FEAT_ENTRY_FLAG_SUPPORT_SAVED_SELECTION BIT(6)
+
+enum cxl_feat_attr_value_persistence {
+ CXL_FEAT_ATTR_VALUE_PERSISTENCE_NONE,
+ CXL_FEAT_ATTR_VALUE_PERSISTENCE_CXL_RESET,
+ CXL_FEAT_ATTR_VALUE_PERSISTENCE_HOT_RESET,
+ CXL_FEAT_ATTR_VALUE_PERSISTENCE_WARM_RESET,
+ CXL_FEAT_ATTR_VALUE_PERSISTENCE_COLD_RESET,
+ CXL_FEAT_ATTR_VALUE_PERSISTENCE_MAX
+};
+
+struct cxl_feat_entry {
+ uuid_t uuid;
+ __le16 id;
+ __le16 get_feat_size;
+ __le16 set_feat_size;
+ __le32 attr_flags;
+ u8 get_feat_ver;
+ u8 set_feat_ver;
+ __le16 set_effects;
+ u8 reserved[18];
+} __packed;
+
+struct cxl_mbox_get_sup_feats_out {
+ __le16 num_entries;
+ __le16 supported_feats;
+ u8 reserved[4];
+ struct cxl_feat_entry ents[] __counted_by_le(supported_feats);
+} __packed;
+
int cxl_internal_send_cmd(struct cxl_mailbox *cxl_mbox,
struct cxl_mbox_cmd *cmd);
int cxl_dev_state_identify(struct cxl_memdev_state *mds);
@@ -872,4 +915,8 @@ struct cxl_hdm {
struct seq_file;
struct dentry *cxl_debugfs_create_dir(const char *dir);
void cxl_dpa_debug(struct seq_file *file, struct cxl_dev_state *cxlds);
+
+int cxl_get_supported_features(struct cxl_memdev_state *mds);
+int cxl_get_supported_feature_entry(struct cxl_memdev_state *mds, const uuid_t *feat_uuid,
+ struct cxl_feat_entry *feat_entry_out);
#endif /* __CXL_MEM_H__ */
diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
index 188412d45e0d..5c2926eec3c3 100644
--- a/drivers/cxl/pci.c
+++ b/drivers/cxl/pci.c
@@ -887,6 +887,10 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
if (rc)
return rc;
+ rc = cxl_get_supported_features(mds);
+ if (rc)
+ dev_dbg(&pdev->dev, "No features enumerated.\n");
+
rc = cxl_set_timestamp(mds);
if (rc)
return rc;
diff --git a/include/cxl/mailbox.h b/include/cxl/mailbox.h
index bacd111e75f1..cc66afec3473 100644
--- a/include/cxl/mailbox.h
+++ b/include/cxl/mailbox.h
@@ -14,6 +14,8 @@ struct cxl_mbox_cmd;
* @mbox_mutex: mutex protects device mailbox and firmware
* @mbox_wait: rcuwait for mailbox
* @mbox_send: @dev specific transport for transmitting mailbox commands
+ * @num_features: number of supported features
+ * @entries: list of supported feature entries.
*/
struct cxl_mailbox {
struct device *host;
@@ -21,6 +23,8 @@ struct cxl_mailbox {
struct mutex mbox_mutex; /* lock to protect mailbox context */
struct rcuwait mbox_wait;
int (*mbox_send)(struct cxl_mailbox *cxl_mbox, struct cxl_mbox_cmd *cmd);
+ int num_features;
+ struct cxl_feat_entry *entries;
};
int cxl_mailbox_init(struct cxl_mailbox *cxl_mbox, struct device *host);
diff --git a/include/uapi/linux/cxl_mem.h b/include/uapi/linux/cxl_mem.h
index c6c0fe27495d..bd2535962f70 100644
--- a/include/uapi/linux/cxl_mem.h
+++ b/include/uapi/linux/cxl_mem.h
@@ -50,6 +50,7 @@
___C(GET_LOG_CAPS, "Get Log Capabilities"), \
___C(CLEAR_LOG, "Clear Log"), \
___C(GET_SUP_LOG_SUBLIST, "Get Supported Logs Sub-List"), \
+ ___C(GET_SUPPORTED_FEATURES, "Get Supported Features"), \
___C(MAX, "invalid / last command")
#define ___C(a, b) CXL_MEM_COMMAND_ID_##a
--
2.34.1
^ permalink raw reply [flat|nested] 30+ messages in thread
* [PATCH v14 05/14] cxl/mbox: Add GET_FEATURE mailbox command
2024-10-25 17:13 [PATCH v14 00/14] EDAC: Scrub: introduce generic EDAC RAS control feature driver + CXL/ACPI-RAS2 drivers shiju.jose
` (3 preceding siblings ...)
2024-10-25 17:13 ` [PATCH v14 04/14] cxl: Add Get Supported Features command for kernel usage shiju.jose
@ 2024-10-25 17:13 ` shiju.jose
2024-10-29 15:47 ` Dave Jiang
2024-10-25 17:13 ` [PATCH v14 06/14] cxl/mbox: Add SET_FEATURE " shiju.jose
` (9 subsequent siblings)
14 siblings, 1 reply; 30+ messages in thread
From: shiju.jose @ 2024-10-25 17:13 UTC (permalink / raw)
To: linux-edac, linux-cxl, linux-acpi, linux-mm, linux-kernel
Cc: bp, tony.luck, rafael, lenb, mchehab, dan.j.williams, dave,
jonathan.cameron, gregkh, sudeep.holla, jassisinghbrar,
dave.jiang, alison.schofield, vishal.l.verma, ira.weiny, david,
Vilas.Sridharan, leo.duran, Yazen.Ghannam, rientjes, jiaqiyan,
Jon.Grimm, dave.hansen, naoya.horiguchi, james.morse, jthoughton,
somasundaram.a, erdemaktas, pgonda, duenwen, gthelen, wschwartz,
dferguson, wbs, nifan.cxl, yazen.ghannam, tanxiaofei, prime.zeng,
roberto.sassu, kangkang.shen, wanghuiqiang, linuxarm, shiju.jose
From: Shiju Jose <shiju.jose@huawei.com>
Add support for GET_FEATURE mailbox command.
CXL spec 3.1 section 8.2.9.6 describes optional device specific features.
The settings of a feature can be retrieved using Get Feature command.
CXL spec 3.1 section 8.2.9.6.2 describes Get Feature command.
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
---
drivers/cxl/core/mbox.c | 41 +++++++++++++++++++++++++++++++++++++++++
drivers/cxl/cxlmem.h | 26 ++++++++++++++++++++++++++
2 files changed, 67 insertions(+)
diff --git a/drivers/cxl/core/mbox.c b/drivers/cxl/core/mbox.c
index 5045960e3bfe..3cd4bce2872d 100644
--- a/drivers/cxl/core/mbox.c
+++ b/drivers/cxl/core/mbox.c
@@ -970,6 +970,47 @@ int cxl_get_supported_feature_entry(struct cxl_memdev_state *mds, const uuid_t *
}
EXPORT_SYMBOL_NS_GPL(cxl_get_supported_feature_entry, CXL);
+size_t cxl_get_feature(struct cxl_memdev_state *mds, const uuid_t feat_uuid,
+ enum cxl_get_feat_selection selection,
+ void *feat_out, size_t feat_out_size)
+{
+ struct cxl_mailbox *cxl_mbox = &mds->cxlds.cxl_mbox;
+ size_t data_to_rd_size, size_out;
+ struct cxl_mbox_get_feat_in pi;
+ struct cxl_mbox_cmd mbox_cmd;
+ size_t data_rcvd_size = 0;
+ int rc;
+
+ if (!feat_out || !feat_out_size)
+ return 0;
+
+ size_out = min(feat_out_size, cxl_mbox->payload_size);
+ pi.uuid = feat_uuid;
+ pi.selection = selection;
+ do {
+ data_to_rd_size = min(feat_out_size - data_rcvd_size,
+ cxl_mbox->payload_size);
+ pi.offset = cpu_to_le16(data_rcvd_size);
+ pi.count = cpu_to_le16(data_to_rd_size);
+
+ mbox_cmd = (struct cxl_mbox_cmd) {
+ .opcode = CXL_MBOX_OP_GET_FEATURE,
+ .size_in = sizeof(pi),
+ .payload_in = &pi,
+ .size_out = size_out,
+ .payload_out = feat_out + data_rcvd_size,
+ .min_out = data_to_rd_size,
+ };
+ rc = cxl_internal_send_cmd(cxl_mbox, &mbox_cmd);
+ if (rc < 0 || !mbox_cmd.size_out)
+ return 0;
+ data_rcvd_size += mbox_cmd.size_out;
+ } while (data_rcvd_size < feat_out_size);
+
+ return data_rcvd_size;
+}
+EXPORT_SYMBOL_NS_GPL(cxl_get_feature, CXL);
+
/**
* cxl_enumerate_cmds() - Enumerate commands for a device.
* @mds: The driver data for the operation
diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
index f88b10188632..0c152719669a 100644
--- a/drivers/cxl/cxlmem.h
+++ b/drivers/cxl/cxlmem.h
@@ -531,6 +531,7 @@ enum cxl_opcode {
CXL_MBOX_OP_CLEAR_LOG = 0x0403,
CXL_MBOX_OP_GET_SUP_LOG_SUBLIST = 0x0405,
CXL_MBOX_OP_GET_SUPPORTED_FEATURES = 0x0500,
+ CXL_MBOX_OP_GET_FEATURE = 0x0501,
CXL_MBOX_OP_IDENTIFY = 0x4000,
CXL_MBOX_OP_GET_PARTITION_INFO = 0x4100,
CXL_MBOX_OP_SET_PARTITION_INFO = 0x4101,
@@ -856,6 +857,28 @@ struct cxl_mbox_get_sup_feats_out {
struct cxl_feat_entry ents[] __counted_by_le(supported_feats);
} __packed;
+/*
+ * Get Feature CXL 3.1 Spec 8.2.9.6.2
+ */
+
+/*
+ * Get Feature input payload
+ * CXL rev 3.1 section 8.2.9.6.2 Table 8-99
+ */
+enum cxl_get_feat_selection {
+ CXL_GET_FEAT_SEL_CURRENT_VALUE,
+ CXL_GET_FEAT_SEL_DEFAULT_VALUE,
+ CXL_GET_FEAT_SEL_SAVED_VALUE,
+ CXL_GET_FEAT_SEL_MAX
+};
+
+struct cxl_mbox_get_feat_in {
+ uuid_t uuid;
+ __le16 offset;
+ __le16 count;
+ u8 selection;
+} __packed;
+
int cxl_internal_send_cmd(struct cxl_mailbox *cxl_mbox,
struct cxl_mbox_cmd *cmd);
int cxl_dev_state_identify(struct cxl_memdev_state *mds);
@@ -919,4 +942,7 @@ void cxl_dpa_debug(struct seq_file *file, struct cxl_dev_state *cxlds);
int cxl_get_supported_features(struct cxl_memdev_state *mds);
int cxl_get_supported_feature_entry(struct cxl_memdev_state *mds, const uuid_t *feat_uuid,
struct cxl_feat_entry *feat_entry_out);
+size_t cxl_get_feature(struct cxl_memdev_state *mds, const uuid_t feat_uuid,
+ enum cxl_get_feat_selection selection,
+ void *feat_out, size_t feat_out_size);
#endif /* __CXL_MEM_H__ */
--
2.34.1
^ permalink raw reply [flat|nested] 30+ messages in thread
* [PATCH v14 06/14] cxl/mbox: Add SET_FEATURE mailbox command
2024-10-25 17:13 [PATCH v14 00/14] EDAC: Scrub: introduce generic EDAC RAS control feature driver + CXL/ACPI-RAS2 drivers shiju.jose
` (4 preceding siblings ...)
2024-10-25 17:13 ` [PATCH v14 05/14] cxl/mbox: Add GET_FEATURE mailbox command shiju.jose
@ 2024-10-25 17:13 ` shiju.jose
2024-10-29 15:51 ` Dave Jiang
2024-10-25 17:13 ` [PATCH v14 07/14] cxl/memfeature: Add CXL memory device patrol scrub control feature shiju.jose
` (8 subsequent siblings)
14 siblings, 1 reply; 30+ messages in thread
From: shiju.jose @ 2024-10-25 17:13 UTC (permalink / raw)
To: linux-edac, linux-cxl, linux-acpi, linux-mm, linux-kernel
Cc: bp, tony.luck, rafael, lenb, mchehab, dan.j.williams, dave,
jonathan.cameron, gregkh, sudeep.holla, jassisinghbrar,
dave.jiang, alison.schofield, vishal.l.verma, ira.weiny, david,
Vilas.Sridharan, leo.duran, Yazen.Ghannam, rientjes, jiaqiyan,
Jon.Grimm, dave.hansen, naoya.horiguchi, james.morse, jthoughton,
somasundaram.a, erdemaktas, pgonda, duenwen, gthelen, wschwartz,
dferguson, wbs, nifan.cxl, yazen.ghannam, tanxiaofei, prime.zeng,
roberto.sassu, kangkang.shen, wanghuiqiang, linuxarm, shiju.jose
From: Shiju Jose <shiju.jose@huawei.com>
Add support for SET_FEATURE mailbox command.
CXL spec 3.1 section 8.2.9.6 describes optional device specific features.
CXL devices support features with changeable attributes.
The settings of a feature can be optionally modified using Set Feature
command.
CXL spec 3.1 section 8.2.9.6.3 describes Set Feature command.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
---
drivers/cxl/core/mbox.c | 73 +++++++++++++++++++++++++++++++++++++++++
drivers/cxl/cxlmem.h | 34 +++++++++++++++++++
2 files changed, 107 insertions(+)
diff --git a/drivers/cxl/core/mbox.c b/drivers/cxl/core/mbox.c
index 3cd4bce2872d..4b9e62de164b 100644
--- a/drivers/cxl/core/mbox.c
+++ b/drivers/cxl/core/mbox.c
@@ -1011,6 +1011,79 @@ size_t cxl_get_feature(struct cxl_memdev_state *mds, const uuid_t feat_uuid,
}
EXPORT_SYMBOL_NS_GPL(cxl_get_feature, CXL);
+/*
+ * FEAT_DATA_MIN_PAYLOAD_SIZE - min extra number of bytes should be
+ * available in the mailbox for storing the actual feature data so that
+ * the feature data transfer would work as expected.
+ */
+#define FEAT_DATA_MIN_PAYLOAD_SIZE 10
+int cxl_set_feature(struct cxl_memdev_state *mds,
+ const uuid_t feat_uuid, u8 feat_version,
+ void *feat_data, size_t feat_data_size,
+ u8 feat_flag)
+{
+ struct cxl_mailbox *cxl_mbox = &mds->cxlds.cxl_mbox;
+ struct cxl_memdev_set_feat_pi {
+ struct cxl_mbox_set_feat_hdr hdr;
+ u8 feat_data[];
+ } __packed;
+ size_t data_in_size, data_sent_size = 0;
+ struct cxl_mbox_cmd mbox_cmd;
+ size_t hdr_size;
+ int rc = 0;
+
+ struct cxl_memdev_set_feat_pi *pi __free(kfree) =
+ kmalloc(cxl_mbox->payload_size, GFP_KERNEL);
+ pi->hdr.uuid = feat_uuid;
+ pi->hdr.version = feat_version;
+ feat_flag &= ~CXL_SET_FEAT_FLAG_DATA_TRANSFER_MASK;
+ feat_flag |= CXL_SET_FEAT_FLAG_DATA_SAVED_ACROSS_RESET;
+ hdr_size = sizeof(pi->hdr);
+ /*
+ * Check minimum mbox payload size is available for
+ * the feature data transfer.
+ */
+ if (hdr_size + FEAT_DATA_MIN_PAYLOAD_SIZE > cxl_mbox->payload_size)
+ return -ENOMEM;
+
+ if ((hdr_size + feat_data_size) <= cxl_mbox->payload_size) {
+ pi->hdr.flags = cpu_to_le32(feat_flag |
+ CXL_SET_FEAT_FLAG_FULL_DATA_TRANSFER);
+ data_in_size = feat_data_size;
+ } else {
+ pi->hdr.flags = cpu_to_le32(feat_flag |
+ CXL_SET_FEAT_FLAG_INITIATE_DATA_TRANSFER);
+ data_in_size = cxl_mbox->payload_size - hdr_size;
+ }
+
+ do {
+ pi->hdr.offset = cpu_to_le16(data_sent_size);
+ memcpy(pi->feat_data, feat_data + data_sent_size, data_in_size);
+ mbox_cmd = (struct cxl_mbox_cmd) {
+ .opcode = CXL_MBOX_OP_SET_FEATURE,
+ .size_in = hdr_size + data_in_size,
+ .payload_in = pi,
+ };
+ rc = cxl_internal_send_cmd(cxl_mbox, &mbox_cmd);
+ if (rc < 0)
+ return rc;
+
+ data_sent_size += data_in_size;
+ if (data_sent_size >= feat_data_size)
+ return 0;
+
+ if ((feat_data_size - data_sent_size) <= (cxl_mbox->payload_size - hdr_size)) {
+ data_in_size = feat_data_size - data_sent_size;
+ pi->hdr.flags = cpu_to_le32(feat_flag |
+ CXL_SET_FEAT_FLAG_FINISH_DATA_TRANSFER);
+ } else {
+ pi->hdr.flags = cpu_to_le32(feat_flag |
+ CXL_SET_FEAT_FLAG_CONTINUE_DATA_TRANSFER);
+ }
+ } while (true);
+}
+EXPORT_SYMBOL_NS_GPL(cxl_set_feature, CXL);
+
/**
* cxl_enumerate_cmds() - Enumerate commands for a device.
* @mds: The driver data for the operation
diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
index 0c152719669a..fb356be8b426 100644
--- a/drivers/cxl/cxlmem.h
+++ b/drivers/cxl/cxlmem.h
@@ -532,6 +532,7 @@ enum cxl_opcode {
CXL_MBOX_OP_GET_SUP_LOG_SUBLIST = 0x0405,
CXL_MBOX_OP_GET_SUPPORTED_FEATURES = 0x0500,
CXL_MBOX_OP_GET_FEATURE = 0x0501,
+ CXL_MBOX_OP_SET_FEATURE = 0x0502,
CXL_MBOX_OP_IDENTIFY = 0x4000,
CXL_MBOX_OP_GET_PARTITION_INFO = 0x4100,
CXL_MBOX_OP_SET_PARTITION_INFO = 0x4101,
@@ -879,6 +880,35 @@ struct cxl_mbox_get_feat_in {
u8 selection;
} __packed;
+/*
+ * Set Feature CXL 3.1 Spec 8.2.9.6.3
+ */
+
+/*
+ * Set Feature input payload
+ * CXL rev 3.1 section 8.2.9.6.3 Table 8-101
+ */
+/* Set Feature : Payload in flags */
+#define CXL_SET_FEAT_FLAG_DATA_TRANSFER_MASK GENMASK(2, 0)
+enum cxl_set_feat_flag_data_transfer {
+ CXL_SET_FEAT_FLAG_FULL_DATA_TRANSFER,
+ CXL_SET_FEAT_FLAG_INITIATE_DATA_TRANSFER,
+ CXL_SET_FEAT_FLAG_CONTINUE_DATA_TRANSFER,
+ CXL_SET_FEAT_FLAG_FINISH_DATA_TRANSFER,
+ CXL_SET_FEAT_FLAG_ABORT_DATA_TRANSFER,
+ CXL_SET_FEAT_FLAG_DATA_TRANSFER_MAX
+};
+
+#define CXL_SET_FEAT_FLAG_DATA_SAVED_ACROSS_RESET BIT(3)
+
+struct cxl_mbox_set_feat_hdr {
+ uuid_t uuid;
+ __le32 flags;
+ __le16 offset;
+ u8 version;
+ u8 rsvd[9];
+} __packed;
+
int cxl_internal_send_cmd(struct cxl_mailbox *cxl_mbox,
struct cxl_mbox_cmd *cmd);
int cxl_dev_state_identify(struct cxl_memdev_state *mds);
@@ -945,4 +975,8 @@ int cxl_get_supported_feature_entry(struct cxl_memdev_state *mds, const uuid_t *
size_t cxl_get_feature(struct cxl_memdev_state *mds, const uuid_t feat_uuid,
enum cxl_get_feat_selection selection,
void *feat_out, size_t feat_out_size);
+int cxl_set_feature(struct cxl_memdev_state *mds,
+ const uuid_t feat_uuid, u8 feat_version,
+ void *feat_data, size_t feat_data_size,
+ u8 feat_flag);
#endif /* __CXL_MEM_H__ */
--
2.34.1
^ permalink raw reply [flat|nested] 30+ messages in thread
* [PATCH v14 07/14] cxl/memfeature: Add CXL memory device patrol scrub control feature
2024-10-25 17:13 [PATCH v14 00/14] EDAC: Scrub: introduce generic EDAC RAS control feature driver + CXL/ACPI-RAS2 drivers shiju.jose
` (5 preceding siblings ...)
2024-10-25 17:13 ` [PATCH v14 06/14] cxl/mbox: Add SET_FEATURE " shiju.jose
@ 2024-10-25 17:13 ` shiju.jose
2024-10-29 16:31 ` Dave Jiang
` (2 more replies)
2024-10-25 17:13 ` [PATCH v14 08/14] cxl/memfeature: Add CXL memory device ECS " shiju.jose
` (7 subsequent siblings)
14 siblings, 3 replies; 30+ messages in thread
From: shiju.jose @ 2024-10-25 17:13 UTC (permalink / raw)
To: linux-edac, linux-cxl, linux-acpi, linux-mm, linux-kernel
Cc: bp, tony.luck, rafael, lenb, mchehab, dan.j.williams, dave,
jonathan.cameron, gregkh, sudeep.holla, jassisinghbrar,
dave.jiang, alison.schofield, vishal.l.verma, ira.weiny, david,
Vilas.Sridharan, leo.duran, Yazen.Ghannam, rientjes, jiaqiyan,
Jon.Grimm, dave.hansen, naoya.horiguchi, james.morse, jthoughton,
somasundaram.a, erdemaktas, pgonda, duenwen, gthelen, wschwartz,
dferguson, wbs, nifan.cxl, yazen.ghannam, tanxiaofei, prime.zeng,
roberto.sassu, kangkang.shen, wanghuiqiang, linuxarm, shiju.jose
From: Shiju Jose <shiju.jose@huawei.com>
CXL spec 3.1 section 8.2.9.9.11.1 describes the device patrol scrub control
feature. The device patrol scrub proactively locates and makes corrections
to errors in regular cycle.
Allow specifying the number of hours within which the patrol scrub must be
completed, subject to minimum and maximum limits reported by the device.
Also allow disabling scrub allowing trade-off error rates against
performance.
Add support for patrol scrub control on CXL memory devices.
Register with the EDAC device driver, which retrieves the scrub attribute
descriptors from EDAC scrub and exposes the sysfs scrub control attributes
to userspace. For example, scrub control for the CXL memory device
"cxl_mem0" is exposed in /sys/bus/edac/devices/cxl_mem0/scrubX/.
Additionally, add support for region-based CXL memory patrol scrub control.
CXL memory regions may be interleaved across one or more CXL memory
devices. For example, region-based scrub control for "cxl_region1" is
exposed in /sys/bus/edac/devices/cxl_region1/scrubX/.
Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
---
Documentation/edac/edac-scrub.rst | 74 ++++++
drivers/cxl/Kconfig | 18 ++
drivers/cxl/core/Makefile | 1 +
drivers/cxl/core/memfeature.c | 381 ++++++++++++++++++++++++++++++
drivers/cxl/core/region.c | 6 +
drivers/cxl/cxlmem.h | 7 +
drivers/cxl/mem.c | 4 +
7 files changed, 491 insertions(+)
create mode 100644 Documentation/edac/edac-scrub.rst
create mode 100644 drivers/cxl/core/memfeature.c
diff --git a/Documentation/edac/edac-scrub.rst b/Documentation/edac/edac-scrub.rst
new file mode 100644
index 000000000000..4aad4974b208
--- /dev/null
+++ b/Documentation/edac/edac-scrub.rst
@@ -0,0 +1,74 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===================
+EDAC Scrub control
+===================
+
+Copyright (c) 2024 HiSilicon Limited.
+
+:Author: Shiju Jose <shiju.jose@huawei.com>
+:License: The GNU Free Documentation License, Version 1.2
+ (dual licensed under the GPL v2)
+:Original Reviewers:
+
+- Written for: 6.13
+- Updated for:
+
+Introduction
+------------
+The EDAC enhancement for RAS featurues exposes interfaces for controlling
+the memory scrubbers in the system. The scrub device drivers in the
+system register with the EDAC scrub. The driver exposes the
+scrub controls to user in the sysfs.
+
+The File System
+---------------
+
+The control attributes of the registered scrubber instance could be
+accessed in the /sys/bus/edac/devices/<dev-name>/scrub*/
+
+sysfs
+-----
+
+Sysfs files are documented in
+`Documentation/ABI/testing/sysfs-edac-scrub-control`.
+
+Example
+-------
+
+The usage takes the form shown in this example::
+
+1. CXL memory device patrol scrubber
+1.1 device based
+root@localhost:~# cat /sys/bus/edac/devices/cxl_mem0/scrub0/min_cycle_duration
+3600
+root@localhost:~# cat /sys/bus/edac/devices/cxl_mem0/scrub0/max_cycle_duration
+918000
+root@localhost:~# cat /sys/bus/edac/devices/cxl_mem0/scrub0/current_cycle_duration
+43200
+root@localhost:~# echo 54000 > /sys/bus/edac/devices/cxl_mem0/scrub0/current_cycle_duration
+root@localhost:~# cat /sys/bus/edac/devices/cxl_mem0/scrub0/current_cycle_duration
+54000
+root@localhost:~# echo 1 > /sys/bus/edac/devices/cxl_mem0/scrub0/enable_background
+root@localhost:~# cat /sys/bus/edac/devices/cxl_mem0/scrub0/enable_background
+1
+root@localhost:~# echo 0 > /sys/bus/edac/devices/cxl_mem0/scrub0/enable_background
+root@localhost:~# cat /sys/bus/edac/devices/cxl_mem0/scrub0/enable_background
+0
+
+1.2. region based
+root@localhost:~# cat /sys/bus/edac/devices/cxl_region0/scrub0/min_cycle_duration
+3600
+root@localhost:~# cat /sys/bus/edac/devices/cxl_region0/scrub0/max_cycle_duration
+918000
+root@localhost:~# cat /sys/bus/edac/devices/cxl_region0/scrub0/current_cycle_duration
+43200
+root@localhost:~# echo 54000 > /sys/bus/edac/devices/cxl_region0/scrub0/current_cycle_duration
+root@localhost:~# cat /sys/bus/edac/devices/cxl_region0/scrub0/current_cycle_duration
+54000
+root@localhost:~# echo 1 > /sys/bus/edac/devices/cxl_region0/scrub0/enable_background
+root@localhost:~# cat /sys/bus/edac/devices/cxl_region0/scrub0/enable_background
+1
+root@localhost:~# echo 0 > /sys/bus/edac/devices/cxl_region0/scrub0/enable_background
+root@localhost:~# cat /sys/bus/edac/devices/cxl_region0/scrub0/enable_background
+0
diff --git a/drivers/cxl/Kconfig b/drivers/cxl/Kconfig
index 29c192f20082..6d79fb3e772e 100644
--- a/drivers/cxl/Kconfig
+++ b/drivers/cxl/Kconfig
@@ -145,4 +145,22 @@ config CXL_REGION_INVALIDATION_TEST
If unsure, or if this kernel is meant for production environments,
say N.
+config CXL_RAS_FEAT
+ tristate "CXL: Memory RAS features"
+ depends on CXL_PCI
+ depends on CXL_MEM
+ depends on EDAC
+ help
+ The CXL memory RAS feature control is optional and allows host to
+ control the RAS features configurations of CXL Type 3 devices.
+
+ It registers with the EDAC device subsystem to expose control
+ attributes of CXL memory device's RAS features to the user.
+ It provides interface functions to support configuring the CXL
+ memory device's RAS features.
+
+ Say 'y/m/n' to enable/disable control of the CXL.mem device's RAS features.
+ See section 8.2.9.9.11 of CXL 3.1 specification for the detailed
+ information of CXL memory device features.
+
endif
diff --git a/drivers/cxl/core/Makefile b/drivers/cxl/core/Makefile
index 9259bcc6773c..2a3c7197bc23 100644
--- a/drivers/cxl/core/Makefile
+++ b/drivers/cxl/core/Makefile
@@ -16,3 +16,4 @@ cxl_core-y += pmu.o
cxl_core-y += cdat.o
cxl_core-$(CONFIG_TRACING) += trace.o
cxl_core-$(CONFIG_CXL_REGION) += region.o
+cxl_core-$(CONFIG_CXL_RAS_FEAT) += memfeature.o
diff --git a/drivers/cxl/core/memfeature.c b/drivers/cxl/core/memfeature.c
new file mode 100644
index 000000000000..8fff00f62f8c
--- /dev/null
+++ b/drivers/cxl/core/memfeature.c
@@ -0,0 +1,381 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * CXL memory RAS feature driver.
+ *
+ * Copyright (c) 2024 HiSilicon Limited.
+ *
+ * - Supports functions to configure RAS features of the
+ * CXL memory devices.
+ * - Registers with the EDAC device subsystem driver to expose
+ * the features sysfs attributes to the user for configuring
+ * CXL memory RAS feature.
+ */
+
+#define pr_fmt(fmt) "CXL MEM FEAT: " fmt
+
+#include <linux/cleanup.h>
+#include <linux/edac.h>
+#include <linux/limits.h>
+#include <cxl.h>
+#include <cxlmem.h>
+
+#define CXL_DEV_NUM_RAS_FEATURES 1
+#define CXL_DEV_HOUR_IN_SECS 3600
+
+#define CXL_SCRUB_NAME_LEN 128
+
+/* CXL memory patrol scrub control definitions */
+static const uuid_t cxl_patrol_scrub_uuid =
+ UUID_INIT(0x96dad7d6, 0xfde8, 0x482b, 0xa7, 0x33, 0x75, 0x77, 0x4e, 0x06, 0xdb, 0x8a);
+
+/* CXL memory patrol scrub control functions */
+struct cxl_patrol_scrub_context {
+ u8 instance;
+ u16 get_feat_size;
+ u16 set_feat_size;
+ u8 get_version;
+ u8 set_version;
+ u16 set_effects;
+ struct cxl_memdev *cxlmd;
+ struct cxl_region *cxlr;
+};
+
+/**
+ * struct cxl_memdev_ps_params - CXL memory patrol scrub parameter data structure.
+ * @enable: [IN & OUT] enable(1)/disable(0) patrol scrub.
+ * @scrub_cycle_changeable: [OUT] scrub cycle attribute of patrol scrub is changeable.
+ * @scrub_cycle_hrs: [IN] Requested patrol scrub cycle in hours.
+ * [OUT] Current patrol scrub cycle in hours.
+ * @min_scrub_cycle_hrs:[OUT] minimum patrol scrub cycle in hours supported.
+ */
+struct cxl_memdev_ps_params {
+ bool enable;
+ bool scrub_cycle_changeable;
+ u16 scrub_cycle_hrs;
+ u16 min_scrub_cycle_hrs;
+};
+
+enum cxl_scrub_param {
+ CXL_PS_PARAM_ENABLE,
+ CXL_PS_PARAM_SCRUB_CYCLE,
+};
+
+#define CXL_MEMDEV_PS_SCRUB_CYCLE_CHANGE_CAP_MASK BIT(0)
+#define CXL_MEMDEV_PS_SCRUB_CYCLE_REALTIME_REPORT_CAP_MASK BIT(1)
+#define CXL_MEMDEV_PS_CUR_SCRUB_CYCLE_MASK GENMASK(7, 0)
+#define CXL_MEMDEV_PS_MIN_SCRUB_CYCLE_MASK GENMASK(15, 8)
+#define CXL_MEMDEV_PS_FLAG_ENABLED_MASK BIT(0)
+
+struct cxl_memdev_ps_rd_attrs {
+ u8 scrub_cycle_cap;
+ __le16 scrub_cycle_hrs;
+ u8 scrub_flags;
+} __packed;
+
+struct cxl_memdev_ps_wr_attrs {
+ u8 scrub_cycle_hrs;
+ u8 scrub_flags;
+} __packed;
+
+static int cxl_mem_ps_get_attrs(struct cxl_memdev_state *mds,
+ struct cxl_memdev_ps_params *params)
+{
+ size_t rd_data_size = sizeof(struct cxl_memdev_ps_rd_attrs);
+ size_t data_size;
+ struct cxl_memdev_ps_rd_attrs *rd_attrs __free(kfree) =
+ kmalloc(rd_data_size, GFP_KERNEL);
+ if (!rd_attrs)
+ return -ENOMEM;
+
+ data_size = cxl_get_feature(mds, cxl_patrol_scrub_uuid,
+ CXL_GET_FEAT_SEL_CURRENT_VALUE,
+ rd_attrs, rd_data_size);
+ if (!data_size)
+ return -EIO;
+
+ params->scrub_cycle_changeable = FIELD_GET(CXL_MEMDEV_PS_SCRUB_CYCLE_CHANGE_CAP_MASK,
+ rd_attrs->scrub_cycle_cap);
+ params->enable = FIELD_GET(CXL_MEMDEV_PS_FLAG_ENABLED_MASK,
+ rd_attrs->scrub_flags);
+ params->scrub_cycle_hrs = FIELD_GET(CXL_MEMDEV_PS_CUR_SCRUB_CYCLE_MASK,
+ rd_attrs->scrub_cycle_hrs);
+ params->min_scrub_cycle_hrs = FIELD_GET(CXL_MEMDEV_PS_MIN_SCRUB_CYCLE_MASK,
+ rd_attrs->scrub_cycle_hrs);
+
+ return 0;
+}
+
+static int cxl_ps_get_attrs(struct device *dev, void *drv_data,
+ struct cxl_memdev_ps_params *params)
+{
+ struct cxl_patrol_scrub_context *cxl_ps_ctx = drv_data;
+ struct cxl_memdev *cxlmd;
+ struct cxl_dev_state *cxlds;
+ struct cxl_memdev_state *mds;
+ u16 min_scrub_cycle = 0;
+ int i, ret;
+
+ if (cxl_ps_ctx->cxlr) {
+ struct cxl_region *cxlr = cxl_ps_ctx->cxlr;
+ struct cxl_region_params *p = &cxlr->params;
+
+ for (i = p->interleave_ways - 1; i >= 0; i--) {
+ struct cxl_endpoint_decoder *cxled = p->targets[i];
+
+ cxlmd = cxled_to_memdev(cxled);
+ cxlds = cxlmd->cxlds;
+ mds = to_cxl_memdev_state(cxlds);
+ ret = cxl_mem_ps_get_attrs(mds, params);
+ if (ret)
+ return ret;
+
+ if (params->min_scrub_cycle_hrs > min_scrub_cycle)
+ min_scrub_cycle = params->min_scrub_cycle_hrs;
+ }
+ params->min_scrub_cycle_hrs = min_scrub_cycle;
+ return 0;
+ }
+ cxlmd = cxl_ps_ctx->cxlmd;
+ cxlds = cxlmd->cxlds;
+ mds = to_cxl_memdev_state(cxlds);
+
+ return cxl_mem_ps_get_attrs(mds, params);
+}
+
+static int cxl_mem_ps_set_attrs(struct device *dev, void *drv_data,
+ struct cxl_memdev_state *mds,
+ struct cxl_memdev_ps_params *params,
+ enum cxl_scrub_param param_type)
+{
+ struct cxl_patrol_scrub_context *cxl_ps_ctx = drv_data;
+ struct cxl_memdev_ps_wr_attrs wr_attrs;
+ struct cxl_memdev_ps_params rd_params;
+ int ret;
+
+ ret = cxl_mem_ps_get_attrs(mds, &rd_params);
+ if (ret) {
+ dev_err(dev, "Get cxlmemdev patrol scrub params failed ret=%d\n",
+ ret);
+ return ret;
+ }
+
+ switch (param_type) {
+ case CXL_PS_PARAM_ENABLE:
+ wr_attrs.scrub_flags = FIELD_PREP(CXL_MEMDEV_PS_FLAG_ENABLED_MASK,
+ params->enable);
+ wr_attrs.scrub_cycle_hrs = FIELD_PREP(CXL_MEMDEV_PS_CUR_SCRUB_CYCLE_MASK,
+ rd_params.scrub_cycle_hrs);
+ break;
+ case CXL_PS_PARAM_SCRUB_CYCLE:
+ if (params->scrub_cycle_hrs < rd_params.min_scrub_cycle_hrs) {
+ dev_err(dev, "Invalid CXL patrol scrub cycle(%d) to set\n",
+ params->scrub_cycle_hrs);
+ dev_err(dev, "Minimum supported CXL patrol scrub cycle in hour %d\n",
+ rd_params.min_scrub_cycle_hrs);
+ return -EINVAL;
+ }
+ wr_attrs.scrub_cycle_hrs = FIELD_PREP(CXL_MEMDEV_PS_CUR_SCRUB_CYCLE_MASK,
+ params->scrub_cycle_hrs);
+ wr_attrs.scrub_flags = FIELD_PREP(CXL_MEMDEV_PS_FLAG_ENABLED_MASK,
+ rd_params.enable);
+ break;
+ }
+
+ ret = cxl_set_feature(mds, cxl_patrol_scrub_uuid,
+ cxl_ps_ctx->set_version,
+ &wr_attrs, sizeof(wr_attrs),
+ CXL_SET_FEAT_FLAG_DATA_SAVED_ACROSS_RESET);
+ if (ret) {
+ dev_err(dev, "CXL patrol scrub set feature failed ret=%d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int cxl_ps_set_attrs(struct device *dev, void *drv_data,
+ struct cxl_memdev_ps_params *params,
+ enum cxl_scrub_param param_type)
+{
+ struct cxl_patrol_scrub_context *cxl_ps_ctx = drv_data;
+ struct cxl_memdev *cxlmd;
+ struct cxl_dev_state *cxlds;
+ struct cxl_memdev_state *mds;
+ int ret, i;
+
+ if (cxl_ps_ctx->cxlr) {
+ struct cxl_region *cxlr = cxl_ps_ctx->cxlr;
+ struct cxl_region_params *p = &cxlr->params;
+
+ for (i = p->interleave_ways - 1; i >= 0; i--) {
+ struct cxl_endpoint_decoder *cxled = p->targets[i];
+
+ cxlmd = cxled_to_memdev(cxled);
+ cxlds = cxlmd->cxlds;
+ mds = to_cxl_memdev_state(cxlds);
+ ret = cxl_mem_ps_set_attrs(dev, drv_data, mds,
+ params, param_type);
+ if (ret)
+ return ret;
+ }
+ return 0;
+ }
+ cxlmd = cxl_ps_ctx->cxlmd;
+ cxlds = cxlmd->cxlds;
+ mds = to_cxl_memdev_state(cxlds);
+
+ return cxl_mem_ps_set_attrs(dev, drv_data, mds, params, param_type);
+}
+
+static int cxl_patrol_scrub_get_enabled_bg(struct device *dev, void *drv_data, bool *enabled)
+{
+ struct cxl_memdev_ps_params params;
+ int ret;
+
+ ret = cxl_ps_get_attrs(dev, drv_data, ¶ms);
+ if (ret)
+ return ret;
+
+ *enabled = params.enable;
+
+ return 0;
+}
+
+static int cxl_patrol_scrub_set_enabled_bg(struct device *dev, void *drv_data, bool enable)
+{
+ struct cxl_memdev_ps_params params = {
+ .enable = enable,
+ };
+
+ return cxl_ps_set_attrs(dev, drv_data, ¶ms, CXL_PS_PARAM_ENABLE);
+}
+
+static int cxl_patrol_scrub_read_min_scrub_cycle(struct device *dev, void *drv_data,
+ u32 *min)
+{
+ struct cxl_memdev_ps_params params;
+ int ret;
+
+ ret = cxl_ps_get_attrs(dev, drv_data, ¶ms);
+ if (ret)
+ return ret;
+ *min = params.min_scrub_cycle_hrs * CXL_DEV_HOUR_IN_SECS;
+
+ return 0;
+}
+
+static int cxl_patrol_scrub_read_max_scrub_cycle(struct device *dev, void *drv_data,
+ u32 *max)
+{
+ *max = U8_MAX * CXL_DEV_HOUR_IN_SECS; /* Max set by register size */
+
+ return 0;
+}
+
+static int cxl_patrol_scrub_read_scrub_cycle(struct device *dev, void *drv_data,
+ u32 *scrub_cycle_secs)
+{
+ struct cxl_memdev_ps_params params;
+ int ret;
+
+ ret = cxl_ps_get_attrs(dev, drv_data, ¶ms);
+ if (ret)
+ return ret;
+
+ *scrub_cycle_secs = params.scrub_cycle_hrs * CXL_DEV_HOUR_IN_SECS;
+
+ return 0;
+}
+
+static int cxl_patrol_scrub_write_scrub_cycle(struct device *dev, void *drv_data,
+ u32 scrub_cycle_secs)
+{
+ struct cxl_memdev_ps_params params = {
+ .scrub_cycle_hrs = scrub_cycle_secs / CXL_DEV_HOUR_IN_SECS,
+ };
+
+ return cxl_ps_set_attrs(dev, drv_data, ¶ms, CXL_PS_PARAM_SCRUB_CYCLE);
+}
+
+static const struct edac_scrub_ops cxl_ps_scrub_ops = {
+ .get_enabled_bg = cxl_patrol_scrub_get_enabled_bg,
+ .set_enabled_bg = cxl_patrol_scrub_set_enabled_bg,
+ .get_min_cycle = cxl_patrol_scrub_read_min_scrub_cycle,
+ .get_max_cycle = cxl_patrol_scrub_read_max_scrub_cycle,
+ .get_cycle_duration = cxl_patrol_scrub_read_scrub_cycle,
+ .set_cycle_duration = cxl_patrol_scrub_write_scrub_cycle,
+};
+
+int cxl_mem_ras_features_init(struct cxl_memdev *cxlmd, struct cxl_region *cxlr)
+{
+ struct edac_dev_feature ras_features[CXL_DEV_NUM_RAS_FEATURES];
+ struct cxl_patrol_scrub_context *cxl_ps_ctx;
+ char cxl_dev_name[CXL_SCRUB_NAME_LEN];
+ struct cxl_feat_entry feat_entry;
+ struct cxl_memdev_state *mds;
+ struct cxl_dev_state *cxlds;
+ int num_ras_features = 0;
+ u8 scrub_inst = 0;
+ int rc, i;
+
+ if (cxlr) {
+ struct cxl_region_params *p = &cxlr->params;
+
+ for (i = p->interleave_ways - 1; i >= 0; i--) {
+ struct cxl_endpoint_decoder *cxled = p->targets[i];
+
+ cxlmd = cxled_to_memdev(cxled);
+ cxlds = cxlmd->cxlds;
+ mds = to_cxl_memdev_state(cxlds);
+ memset(&feat_entry, 0, sizeof(feat_entry));
+ rc = cxl_get_supported_feature_entry(mds, &cxl_patrol_scrub_uuid,
+ &feat_entry);
+ if (rc < 0)
+ return rc;
+ if (!(feat_entry.attr_flags & CXL_FEAT_ENTRY_FLAG_CHANGABLE))
+ return -EOPNOTSUPP;
+ }
+ } else {
+ cxlds = cxlmd->cxlds;
+ mds = to_cxl_memdev_state(cxlds);
+ rc = cxl_get_supported_feature_entry(mds, &cxl_patrol_scrub_uuid,
+ &feat_entry);
+ if (rc < 0)
+ return rc;
+
+ if (!(feat_entry.attr_flags & CXL_FEAT_ENTRY_FLAG_CHANGABLE))
+ return -EOPNOTSUPP;
+ }
+
+ cxl_ps_ctx = devm_kzalloc(&cxlmd->dev, sizeof(*cxl_ps_ctx), GFP_KERNEL);
+ if (!cxl_ps_ctx)
+ return -ENOMEM;
+
+ *cxl_ps_ctx = (struct cxl_patrol_scrub_context) {
+ .get_feat_size = feat_entry.get_feat_size,
+ .set_feat_size = feat_entry.set_feat_size,
+ .get_version = feat_entry.get_feat_ver,
+ .set_version = feat_entry.set_feat_ver,
+ .set_effects = feat_entry.set_effects,
+ .instance = scrub_inst++,
+ };
+ if (cxlr) {
+ snprintf(cxl_dev_name, sizeof(cxl_dev_name),
+ "cxl_region%d", cxlr->id);
+ cxl_ps_ctx->cxlr = cxlr;
+ } else {
+ snprintf(cxl_dev_name, sizeof(cxl_dev_name),
+ "%s_%s", "cxl", dev_name(&cxlmd->dev));
+ cxl_ps_ctx->cxlmd = cxlmd;
+ }
+
+ ras_features[num_ras_features].ft_type = RAS_FEAT_SCRUB;
+ ras_features[num_ras_features].instance = cxl_ps_ctx->instance;
+ ras_features[num_ras_features].scrub_ops = &cxl_ps_scrub_ops;
+ ras_features[num_ras_features].ctx = cxl_ps_ctx;
+ num_ras_features++;
+
+ return edac_dev_register(&cxlmd->dev, cxl_dev_name, NULL,
+ num_ras_features, ras_features);
+}
+EXPORT_SYMBOL_NS_GPL(cxl_mem_ras_features_init, CXL);
diff --git a/drivers/cxl/core/region.c b/drivers/cxl/core/region.c
index e701e4b04032..4292765606cd 100644
--- a/drivers/cxl/core/region.c
+++ b/drivers/cxl/core/region.c
@@ -3443,6 +3443,12 @@ static int cxl_region_probe(struct device *dev)
p->res->start, p->res->end, cxlr,
is_system_ram) > 0)
return 0;
+
+ rc = cxl_mem_ras_features_init(NULL, cxlr);
+ if (rc)
+ dev_warn(&cxlr->dev, "CXL RAS features init for region_id=%d failed\n",
+ cxlr->id);
+
return devm_cxl_add_dax_region(cxlr);
default:
dev_dbg(&cxlr->dev, "unsupported region mode: %d\n",
diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
index fb356be8b426..9259c5d70a65 100644
--- a/drivers/cxl/cxlmem.h
+++ b/drivers/cxl/cxlmem.h
@@ -933,6 +933,13 @@ int cxl_trigger_poison_list(struct cxl_memdev *cxlmd);
int cxl_inject_poison(struct cxl_memdev *cxlmd, u64 dpa);
int cxl_clear_poison(struct cxl_memdev *cxlmd, u64 dpa);
+#if IS_ENABLED(CONFIG_CXL_RAS_FEAT)
+int cxl_mem_ras_features_init(struct cxl_memdev *cxlmd, struct cxl_region *cxlr);
+#else
+static inline int cxl_mem_ras_features_init(struct cxl_memdev *cxlmd, struct cxl_region *cxlr)
+{ return 0; }
+#endif
+
#ifdef CONFIG_CXL_SUSPEND
void cxl_mem_active_inc(void);
void cxl_mem_active_dec(void);
diff --git a/drivers/cxl/mem.c b/drivers/cxl/mem.c
index a9fd5cd5a0d2..23ef99e02182 100644
--- a/drivers/cxl/mem.c
+++ b/drivers/cxl/mem.c
@@ -116,6 +116,10 @@ static int cxl_mem_probe(struct device *dev)
if (!cxlds->media_ready)
return -EBUSY;
+ rc = cxl_mem_ras_features_init(cxlmd, NULL);
+ if (rc)
+ dev_warn(&cxlmd->dev, "CXL RAS features init failed\n");
+
/*
* Someone is trying to reattach this device after it lost its port
* connection (an endpoint port previously registered by this memdev was
--
2.34.1
^ permalink raw reply [flat|nested] 30+ messages in thread
* [PATCH v14 08/14] cxl/memfeature: Add CXL memory device ECS control feature
2024-10-25 17:13 [PATCH v14 00/14] EDAC: Scrub: introduce generic EDAC RAS control feature driver + CXL/ACPI-RAS2 drivers shiju.jose
` (6 preceding siblings ...)
2024-10-25 17:13 ` [PATCH v14 07/14] cxl/memfeature: Add CXL memory device patrol scrub control feature shiju.jose
@ 2024-10-25 17:13 ` shiju.jose
2024-10-25 17:13 ` [PATCH v14 09/14] ACPI:RAS2: Add ACPI RAS2 driver shiju.jose
` (6 subsequent siblings)
14 siblings, 0 replies; 30+ messages in thread
From: shiju.jose @ 2024-10-25 17:13 UTC (permalink / raw)
To: linux-edac, linux-cxl, linux-acpi, linux-mm, linux-kernel
Cc: bp, tony.luck, rafael, lenb, mchehab, dan.j.williams, dave,
jonathan.cameron, gregkh, sudeep.holla, jassisinghbrar,
dave.jiang, alison.schofield, vishal.l.verma, ira.weiny, david,
Vilas.Sridharan, leo.duran, Yazen.Ghannam, rientjes, jiaqiyan,
Jon.Grimm, dave.hansen, naoya.horiguchi, james.morse, jthoughton,
somasundaram.a, erdemaktas, pgonda, duenwen, gthelen, wschwartz,
dferguson, wbs, nifan.cxl, yazen.ghannam, tanxiaofei, prime.zeng,
roberto.sassu, kangkang.shen, wanghuiqiang, linuxarm, shiju.jose
From: Shiju Jose <shiju.jose@huawei.com>
CXL spec 3.1 section 8.2.9.9.11.2 describes the DDR5 ECS (Error Check
Scrub) control feature.
The Error Check Scrub (ECS) is a feature defined in JEDEC DDR5 SDRAM
Specification (JESD79-5) and allows the DRAM to internally read, correct
single-bit errors, and write back corrected data bits to the DRAM array
while providing transparency to error counts.
The ECS control allows the requester to change the log entry type, the ECS
threshold count (provided the request falls within the limits specified in
DDR5 mode registers), switch between codeword mode and row count mode, and
reset the ECS counter.
Register with EDAC device driver, which retrieves the ECS attribute
descriptors from the EDAC ECS and exposes the ECS control attributes to
userspace via sysfs. For example, the ECS control for the memory media FRU0
in CXL mem0 device is located at /sys/bus/edac/devices/cxl_mem0/ecs_fru0/
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
---
drivers/cxl/core/memfeature.c | 368 +++++++++++++++++++++++++++++++++-
1 file changed, 365 insertions(+), 3 deletions(-)
diff --git a/drivers/cxl/core/memfeature.c b/drivers/cxl/core/memfeature.c
index 8fff00f62f8c..26ba360165db 100644
--- a/drivers/cxl/core/memfeature.c
+++ b/drivers/cxl/core/memfeature.c
@@ -19,7 +19,7 @@
#include <cxl.h>
#include <cxlmem.h>
-#define CXL_DEV_NUM_RAS_FEATURES 1
+#define CXL_DEV_NUM_RAS_FEATURES 2
#define CXL_DEV_HOUR_IN_SECS 3600
#define CXL_SCRUB_NAME_LEN 128
@@ -306,15 +306,340 @@ static const struct edac_scrub_ops cxl_ps_scrub_ops = {
.set_cycle_duration = cxl_patrol_scrub_write_scrub_cycle,
};
+/* CXL DDR5 ECS control definitions */
+static const uuid_t cxl_ecs_uuid =
+ UUID_INIT(0xe5b13f22, 0x2328, 0x4a14, 0xb8, 0xba, 0xb9, 0x69, 0x1e, 0x89, 0x33, 0x86);
+
+struct cxl_ecs_context {
+ u16 num_media_frus;
+ u16 get_feat_size;
+ u16 set_feat_size;
+ u8 get_version;
+ u8 set_version;
+ u16 set_effects;
+ struct cxl_memdev *cxlmd;
+};
+
+enum {
+ CXL_ECS_PARAM_LOG_ENTRY_TYPE,
+ CXL_ECS_PARAM_THRESHOLD,
+ CXL_ECS_PARAM_MODE,
+ CXL_ECS_PARAM_RESET_COUNTER,
+};
+
+#define CXL_ECS_LOG_ENTRY_TYPE_MASK GENMASK(1, 0)
+#define CXL_ECS_REALTIME_REPORT_CAP_MASK BIT(0)
+#define CXL_ECS_THRESHOLD_COUNT_MASK GENMASK(2, 0)
+#define CXL_ECS_COUNT_MODE_MASK BIT(3)
+#define CXL_ECS_RESET_COUNTER_MASK BIT(4)
+
+enum {
+ ECS_THRESHOLD_256 = 3,
+ ECS_THRESHOLD_1024 = 4,
+ ECS_THRESHOLD_4096 = 5,
+};
+
+static const u16 ecs_supp_threshold[] = {
+ [ECS_THRESHOLD_256] = 256,
+ [ECS_THRESHOLD_1024] = 1024,
+ [ECS_THRESHOLD_4096] = 4096,
+};
+
+enum {
+ ECS_LOG_ENTRY_TYPE_DRAM = 0x0,
+ ECS_LOG_ENTRY_TYPE_MEM_MEDIA_FRU = 0x1,
+};
+
+enum cxl_ecs_count_mode {
+ ECS_MODE_COUNTS_ROWS = 0,
+ ECS_MODE_COUNTS_CODEWORDS = 1,
+};
+
+/**
+ * struct cxl_ecs_params - CXL memory DDR5 ECS parameter data structure.
+ * @log_entry_type: ECS log entry type, per DRAM or per memory media FRU.
+ * @threshold: ECS threshold count per GB of memory cells.
+ * @count_mode: codeword/row count mode
+ * 0 : ECS counts rows with errors
+ * 1 : ECS counts codeword with errors
+ * @reset_counter: [IN] reset ECC counter to default value.
+ */
+struct cxl_ecs_params {
+ u8 log_entry_type;
+ u16 threshold;
+ enum cxl_ecs_count_mode count_mode;
+ u8 reset_counter;
+};
+
+struct cxl_ecs_fru_rd_attrs {
+ u8 ecs_cap;
+ __le16 ecs_config;
+ u8 ecs_flags;
+} __packed;
+
+struct cxl_ecs_rd_attrs {
+ u8 ecs_log_cap;
+ struct cxl_ecs_fru_rd_attrs fru_attrs[];
+} __packed;
+
+struct cxl_ecs_fru_wr_attrs {
+ __le16 ecs_config;
+} __packed;
+
+struct cxl_ecs_wr_attrs {
+ u8 ecs_log_cap;
+ struct cxl_ecs_fru_wr_attrs fru_attrs[];
+} __packed;
+
+/* CXL DDR5 ECS control functions */
+static int cxl_mem_ecs_get_attrs(struct device *dev, void *drv_data, int fru_id,
+ struct cxl_ecs_params *params)
+{
+ struct cxl_ecs_context *cxl_ecs_ctx = drv_data;
+ struct cxl_memdev *cxlmd = cxl_ecs_ctx->cxlmd;
+ struct cxl_dev_state *cxlds = cxlmd->cxlds;
+ struct cxl_memdev_state *mds = to_cxl_memdev_state(cxlds);
+ struct cxl_ecs_fru_rd_attrs *fru_rd_attrs;
+ size_t rd_data_size;
+ u8 threshold_index;
+ size_t data_size;
+
+ rd_data_size = cxl_ecs_ctx->get_feat_size;
+
+ struct cxl_ecs_rd_attrs *rd_attrs __free(kfree) =
+ kmalloc(rd_data_size, GFP_KERNEL);
+ if (!rd_attrs)
+ return -ENOMEM;
+
+ params->log_entry_type = 0;
+ params->threshold = 0;
+ params->count_mode = 0;
+ data_size = cxl_get_feature(mds, cxl_ecs_uuid,
+ CXL_GET_FEAT_SEL_CURRENT_VALUE,
+ rd_attrs, rd_data_size);
+ if (!data_size)
+ return -EIO;
+
+ fru_rd_attrs = rd_attrs->fru_attrs;
+ params->log_entry_type = FIELD_GET(CXL_ECS_LOG_ENTRY_TYPE_MASK,
+ rd_attrs->ecs_log_cap);
+ threshold_index = FIELD_GET(CXL_ECS_THRESHOLD_COUNT_MASK,
+ fru_rd_attrs[fru_id].ecs_config);
+ params->threshold = ecs_supp_threshold[threshold_index];
+ params->count_mode = FIELD_GET(CXL_ECS_COUNT_MODE_MASK,
+ fru_rd_attrs[fru_id].ecs_config);
+ return 0;
+}
+
+static int cxl_mem_ecs_set_attrs(struct device *dev, void *drv_data, int fru_id,
+ struct cxl_ecs_params *params, u8 param_type)
+{
+ struct cxl_ecs_context *cxl_ecs_ctx = drv_data;
+ struct cxl_memdev *cxlmd = cxl_ecs_ctx->cxlmd;
+ struct cxl_dev_state *cxlds = cxlmd->cxlds;
+ struct cxl_memdev_state *mds = to_cxl_memdev_state(cxlds);
+ struct cxl_ecs_fru_rd_attrs *fru_rd_attrs;
+ struct cxl_ecs_fru_wr_attrs *fru_wr_attrs;
+ size_t rd_data_size, wr_data_size;
+ u16 num_media_frus, count;
+ size_t data_size;
+ int ret;
+
+ num_media_frus = cxl_ecs_ctx->num_media_frus;
+ rd_data_size = cxl_ecs_ctx->get_feat_size;
+ wr_data_size = cxl_ecs_ctx->set_feat_size;
+ struct cxl_ecs_rd_attrs *rd_attrs __free(kfree) =
+ kmalloc(rd_data_size, GFP_KERNEL);
+ if (!rd_attrs)
+ return -ENOMEM;
+
+ data_size = cxl_get_feature(mds, cxl_ecs_uuid,
+ CXL_GET_FEAT_SEL_CURRENT_VALUE,
+ rd_attrs, rd_data_size);
+ if (!data_size)
+ return -EIO;
+
+ struct cxl_ecs_wr_attrs *wr_attrs __free(kfree) =
+ kmalloc(wr_data_size, GFP_KERNEL);
+ if (!wr_attrs)
+ return -ENOMEM;
+
+ /*
+ * Fill writable attributes from the current attributes read
+ * for all the media FRUs.
+ */
+ fru_rd_attrs = rd_attrs->fru_attrs;
+ fru_wr_attrs = wr_attrs->fru_attrs;
+ wr_attrs->ecs_log_cap = rd_attrs->ecs_log_cap;
+ for (count = 0; count < num_media_frus; count++)
+ fru_wr_attrs[count].ecs_config = fru_rd_attrs[count].ecs_config;
+
+ /* Fill attribute to be set for the media FRU */
+ switch (param_type) {
+ case CXL_ECS_PARAM_LOG_ENTRY_TYPE:
+ if (params->log_entry_type != ECS_LOG_ENTRY_TYPE_DRAM &&
+ params->log_entry_type != ECS_LOG_ENTRY_TYPE_MEM_MEDIA_FRU) {
+ dev_err(dev,
+ "Invalid CXL ECS scrub log entry type(%d) to set\n",
+ params->log_entry_type);
+ dev_err(dev,
+ "Log Entry Type 0: per DRAM 1: per Memory Media FRU\n");
+ return -EINVAL;
+ }
+ wr_attrs->ecs_log_cap = FIELD_PREP(CXL_ECS_LOG_ENTRY_TYPE_MASK,
+ params->log_entry_type);
+ break;
+ case CXL_ECS_PARAM_THRESHOLD:
+ fru_wr_attrs[fru_id].ecs_config &= ~CXL_ECS_THRESHOLD_COUNT_MASK;
+ switch (params->threshold) {
+ case 256:
+ fru_wr_attrs[fru_id].ecs_config |= FIELD_PREP(CXL_ECS_THRESHOLD_COUNT_MASK,
+ ECS_THRESHOLD_256);
+ break;
+ case 1024:
+ fru_wr_attrs[fru_id].ecs_config |= FIELD_PREP(CXL_ECS_THRESHOLD_COUNT_MASK,
+ ECS_THRESHOLD_1024);
+ break;
+ case 4096:
+ fru_wr_attrs[fru_id].ecs_config |= FIELD_PREP(CXL_ECS_THRESHOLD_COUNT_MASK,
+ ECS_THRESHOLD_4096);
+ break;
+ default:
+ dev_err(dev,
+ "Invalid CXL ECS scrub threshold count(%d) to set\n",
+ params->threshold);
+ dev_err(dev,
+ "Supported scrub threshold counts: %u, %u, %u\n",
+ ecs_supp_threshold[ECS_THRESHOLD_256],
+ ecs_supp_threshold[ECS_THRESHOLD_1024],
+ ecs_supp_threshold[ECS_THRESHOLD_4096]);
+ return -EINVAL;
+ }
+ break;
+ case CXL_ECS_PARAM_MODE:
+ if (params->count_mode != ECS_MODE_COUNTS_ROWS &&
+ params->count_mode != ECS_MODE_COUNTS_CODEWORDS) {
+ dev_err(dev,
+ "Invalid CXL ECS scrub mode(%d) to set\n",
+ params->count_mode);
+ dev_err(dev,
+ "Supported ECS Modes: 0: ECS counts rows with errors,"
+ " 1: ECS counts codewords with errors\n");
+ return -EINVAL;
+ }
+ fru_wr_attrs[fru_id].ecs_config &= ~CXL_ECS_COUNT_MODE_MASK;
+ fru_wr_attrs[fru_id].ecs_config |= FIELD_PREP(CXL_ECS_COUNT_MODE_MASK,
+ params->count_mode);
+ break;
+ case CXL_ECS_PARAM_RESET_COUNTER:
+ if (params->reset_counter != 1)
+ return -EINVAL;
+
+ fru_wr_attrs[fru_id].ecs_config &= ~CXL_ECS_RESET_COUNTER_MASK;
+ fru_wr_attrs[fru_id].ecs_config |= FIELD_PREP(CXL_ECS_RESET_COUNTER_MASK,
+ params->reset_counter);
+ break;
+ default:
+ dev_err(dev, "Invalid CXL ECS parameter to set\n");
+ return -EINVAL;
+ }
+
+ ret = cxl_set_feature(mds, cxl_ecs_uuid, cxl_ecs_ctx->set_version,
+ wr_attrs, wr_data_size,
+ CXL_SET_FEAT_FLAG_DATA_SAVED_ACROSS_RESET);
+ if (ret) {
+ dev_err(dev, "CXL ECS set feature failed ret=%d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+#define CXL_ECS_READ_ATTR(attrib) \
+static int cxl_ecs_get_##attrib(struct device *dev, void *drv_data, \
+ int fru_id, u32 *val) \
+{ \
+ struct cxl_ecs_params params; \
+ int ret; \
+ \
+ ret = cxl_mem_ecs_get_attrs(dev, drv_data, fru_id, ¶ms); \
+ if (ret) \
+ return ret; \
+ \
+ *val = params.attrib; \
+ \
+ return 0; \
+}
+
+CXL_ECS_READ_ATTR(log_entry_type)
+CXL_ECS_READ_ATTR(count_mode)
+CXL_ECS_READ_ATTR(threshold)
+
+#define CXL_ECS_GET_ATTR(attrib, data, attr_type) \
+static int cxl_ecs_get_##attrib(struct device *dev, void *drv_data, \
+ int fru_id, u32 *val) \
+{ \
+ struct cxl_ecs_params params; \
+ int ret; \
+ \
+ ret = cxl_mem_ecs_get_attrs(dev, drv_data, fru_id, ¶ms); \
+ if (ret) \
+ return ret; \
+ \
+ if (params.data == (attr_type)) \
+ *val = 1; \
+ else \
+ *val = 0; \
+ \
+ return 0; \
+}
+
+CXL_ECS_GET_ATTR(log_entry_type_per_dram, log_entry_type, ECS_LOG_ENTRY_TYPE_DRAM)
+CXL_ECS_GET_ATTR(log_entry_type_per_memory_media, log_entry_type, ECS_LOG_ENTRY_TYPE_MEM_MEDIA_FRU)
+CXL_ECS_GET_ATTR(mode_counts_rows, count_mode, ECS_MODE_COUNTS_ROWS)
+CXL_ECS_GET_ATTR(mode_counts_codewords, count_mode, ECS_MODE_COUNTS_CODEWORDS)
+
+#define CXL_ECS_WRITE_ATTR(attrib, param_type) \
+static int cxl_ecs_set_##attrib(struct device *dev, void *drv_data, \
+ int fru_id, u32 val) \
+{ \
+ struct cxl_ecs_params params = { \
+ .attrib = val, \
+ }; \
+ \
+ return cxl_mem_ecs_set_attrs(dev, drv_data, fru_id, ¶ms, (param_type)); \
+}
+CXL_ECS_WRITE_ATTR(log_entry_type, CXL_ECS_PARAM_LOG_ENTRY_TYPE)
+CXL_ECS_WRITE_ATTR(count_mode, CXL_ECS_PARAM_MODE)
+CXL_ECS_WRITE_ATTR(reset_counter, CXL_ECS_PARAM_RESET_COUNTER)
+CXL_ECS_WRITE_ATTR(threshold, CXL_ECS_PARAM_THRESHOLD)
+
+static const struct edac_ecs_ops cxl_ecs_ops = {
+ .get_log_entry_type = cxl_ecs_get_log_entry_type,
+ .set_log_entry_type = cxl_ecs_set_log_entry_type,
+ .get_log_entry_type_per_dram = cxl_ecs_get_log_entry_type_per_dram,
+ .get_log_entry_type_per_memory_media =
+ cxl_ecs_get_log_entry_type_per_memory_media,
+ .get_mode = cxl_ecs_get_count_mode,
+ .set_mode = cxl_ecs_set_count_mode,
+ .get_mode_counts_codewords = cxl_ecs_get_mode_counts_codewords,
+ .get_mode_counts_rows = cxl_ecs_get_mode_counts_rows,
+ .reset = cxl_ecs_set_reset_counter,
+ .get_threshold = cxl_ecs_get_threshold,
+ .set_threshold = cxl_ecs_set_threshold,
+};
+
int cxl_mem_ras_features_init(struct cxl_memdev *cxlmd, struct cxl_region *cxlr)
{
struct edac_dev_feature ras_features[CXL_DEV_NUM_RAS_FEATURES];
struct cxl_patrol_scrub_context *cxl_ps_ctx;
char cxl_dev_name[CXL_SCRUB_NAME_LEN];
+ struct cxl_ecs_context *cxl_ecs_ctx;
struct cxl_feat_entry feat_entry;
struct cxl_memdev_state *mds;
struct cxl_dev_state *cxlds;
int num_ras_features = 0;
+ int num_media_frus;
u8 scrub_inst = 0;
int rc, i;
@@ -341,10 +666,10 @@ int cxl_mem_ras_features_init(struct cxl_memdev *cxlmd, struct cxl_region *cxlr)
rc = cxl_get_supported_feature_entry(mds, &cxl_patrol_scrub_uuid,
&feat_entry);
if (rc < 0)
- return rc;
+ goto feat_scrub_done;
if (!(feat_entry.attr_flags & CXL_FEAT_ENTRY_FLAG_CHANGABLE))
- return -EOPNOTSUPP;
+ goto feat_scrub_done;
}
cxl_ps_ctx = devm_kzalloc(&cxlmd->dev, sizeof(*cxl_ps_ctx), GFP_KERNEL);
@@ -375,6 +700,43 @@ int cxl_mem_ras_features_init(struct cxl_memdev *cxlmd, struct cxl_region *cxlr)
ras_features[num_ras_features].ctx = cxl_ps_ctx;
num_ras_features++;
+feat_scrub_done:
+ if (!cxlr) {
+ rc = cxl_get_supported_feature_entry(mds, &cxl_ecs_uuid,
+ &feat_entry);
+ if (rc < 0)
+ goto feat_ecs_done;
+
+ if (!(feat_entry.attr_flags & CXL_FEAT_ENTRY_FLAG_CHANGABLE))
+ goto feat_ecs_done;
+ num_media_frus = (feat_entry.get_feat_size - sizeof(struct cxl_ecs_rd_attrs)) /
+ sizeof(struct cxl_ecs_fru_rd_attrs);
+ if (!num_media_frus)
+ goto feat_ecs_done;
+
+ cxl_ecs_ctx = devm_kzalloc(&cxlmd->dev, sizeof(*cxl_ecs_ctx),
+ GFP_KERNEL);
+ if (!cxl_ecs_ctx)
+ goto feat_ecs_done;
+ *cxl_ecs_ctx = (struct cxl_ecs_context) {
+ .get_feat_size = feat_entry.get_feat_size,
+ .set_feat_size = feat_entry.set_feat_size,
+ .get_version = feat_entry.get_feat_ver,
+ .set_version = feat_entry.set_feat_ver,
+ .set_effects = feat_entry.set_effects,
+ .num_media_frus = num_media_frus,
+ .cxlmd = cxlmd,
+ };
+
+ ras_features[num_ras_features].ft_type = RAS_FEAT_ECS;
+ ras_features[num_ras_features].ecs_ops = &cxl_ecs_ops;
+ ras_features[num_ras_features].ctx = cxl_ecs_ctx;
+ ras_features[num_ras_features].ecs_info.num_media_frus =
+ num_media_frus;
+ num_ras_features++;
+ }
+
+feat_ecs_done:
return edac_dev_register(&cxlmd->dev, cxl_dev_name, NULL,
num_ras_features, ras_features);
}
--
2.34.1
^ permalink raw reply [flat|nested] 30+ messages in thread
* [PATCH v14 09/14] ACPI:RAS2: Add ACPI RAS2 driver
2024-10-25 17:13 [PATCH v14 00/14] EDAC: Scrub: introduce generic EDAC RAS control feature driver + CXL/ACPI-RAS2 drivers shiju.jose
` (7 preceding siblings ...)
2024-10-25 17:13 ` [PATCH v14 08/14] cxl/memfeature: Add CXL memory device ECS " shiju.jose
@ 2024-10-25 17:13 ` shiju.jose
2024-10-25 17:13 ` [PATCH v14 10/14] ras: mem: Add memory " shiju.jose
` (5 subsequent siblings)
14 siblings, 0 replies; 30+ messages in thread
From: shiju.jose @ 2024-10-25 17:13 UTC (permalink / raw)
To: linux-edac, linux-cxl, linux-acpi, linux-mm, linux-kernel
Cc: bp, tony.luck, rafael, lenb, mchehab, dan.j.williams, dave,
jonathan.cameron, gregkh, sudeep.holla, jassisinghbrar,
dave.jiang, alison.schofield, vishal.l.verma, ira.weiny, david,
Vilas.Sridharan, leo.duran, Yazen.Ghannam, rientjes, jiaqiyan,
Jon.Grimm, dave.hansen, naoya.horiguchi, james.morse, jthoughton,
somasundaram.a, erdemaktas, pgonda, duenwen, gthelen, wschwartz,
dferguson, wbs, nifan.cxl, yazen.ghannam, tanxiaofei, prime.zeng,
roberto.sassu, kangkang.shen, wanghuiqiang, linuxarm, shiju.jose
From: Shiju Jose <shiju.jose@huawei.com>
Add support for ACPI RAS2 feature table (RAS2) defined in the
ACPI 6.5 Specification, section 5.2.21.
Driver contains RAS2 Init, which extracts the RAS2 table and driver
adds auxiliary device for each memory feature which binds to the
RAS2 memory driver.
Driver uses PCC mailbox to communicate with the ACPI HW and the
driver adds OSPM interfaces to send RAS2 commands.
Co-developed-by: A Somasundaram <somasundaram.a@hpe.com>
Signed-off-by: A Somasundaram <somasundaram.a@hpe.com>
Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
---
drivers/acpi/Kconfig | 11 ++
drivers/acpi/Makefile | 1 +
drivers/acpi/ras2.c | 409 +++++++++++++++++++++++++++++++++++++++
include/acpi/ras2_acpi.h | 45 +++++
4 files changed, 466 insertions(+)
create mode 100755 drivers/acpi/ras2.c
create mode 100644 include/acpi/ras2_acpi.h
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index d67f63d93b2a..ceae55704a14 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -284,6 +284,17 @@ config ACPI_CPPC_LIB
If your platform does not support CPPC in firmware,
leave this option disabled.
+config ACPI_RAS2
+ bool "ACPI RAS2 driver"
+ select AUXILIARY_BUS
+ select MAILBOX
+ select PCC
+ help
+ The driver adds support for ACPI RAS2 feature table(extracts RAS2
+ table from OS system table) and OSPM interfaces to send RAS2
+ commands via PCC mailbox subspace. Driver adds platform device for
+ the RAS2 memory features which binds to the RAS2 memory driver.
+
config ACPI_PROCESSOR
tristate "Processor"
depends on X86 || ARM64 || LOONGARCH || RISCV
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 61ca4afe83dc..84e2a2519bae 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -100,6 +100,7 @@ obj-$(CONFIG_ACPI_EC_DEBUGFS) += ec_sys.o
obj-$(CONFIG_ACPI_BGRT) += bgrt.o
obj-$(CONFIG_ACPI_CPPC_LIB) += cppc_acpi.o
obj-$(CONFIG_ACPI_SPCR_TABLE) += spcr.o
+obj-$(CONFIG_ACPI_RAS2) += ras2.o
obj-$(CONFIG_ACPI_DEBUGGER_USER) += acpi_dbg.o
obj-$(CONFIG_ACPI_PPTT) += pptt.o
obj-$(CONFIG_ACPI_PFRUT) += pfr_update.o pfr_telemetry.o
diff --git a/drivers/acpi/ras2.c b/drivers/acpi/ras2.c
new file mode 100755
index 000000000000..56ad7667ce81
--- /dev/null
+++ b/drivers/acpi/ras2.c
@@ -0,0 +1,409 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Implementation of ACPI RAS2 driver.
+ *
+ * Copyright (c) 2024 HiSilicon Limited.
+ *
+ * Support for RAS2 - ACPI 6.5 Specification, section 5.2.21
+ *
+ * Driver contains ACPI RAS2 init, which extracts the ACPI RAS2 table and
+ * get the PCC channel subspace for communicating with the ACPI compliant
+ * HW platform which supports ACPI RAS2. Driver adds platform devices
+ * for each RAS2 memory feature which binds to the memory ACPI RAS2 driver.
+ */
+
+#define pr_fmt(fmt) "ACPI RAS2: " fmt
+
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/ktime.h>
+#include <linux/platform_device.h>
+#include <acpi/pcc.h>
+#include <acpi/ras2_acpi.h>
+
+/* Data structure for PCC communication */
+struct ras2_pcc_subspace {
+ int pcc_subspace_id;
+ struct mbox_client mbox_client;
+ struct pcc_mbox_chan *pcc_chan;
+ struct acpi_ras2_shared_memory __iomem *pcc_comm_addr;
+ bool pcc_channel_acquired;
+ ktime_t deadline;
+ unsigned int pcc_mpar;
+ unsigned int pcc_mrtt;
+ struct list_head elem;
+ u16 ref_count;
+};
+
+/*
+ * Arbitrary Retries for PCC commands because the
+ * remote processor could be much slower to reply.
+ */
+#define RAS2_NUM_RETRIES 600
+
+#define RAS2_FEATURE_TYPE_MEMORY 0x00
+
+/* global variables for the RAS2 PCC subspaces */
+static DEFINE_MUTEX(ras2_pcc_subspace_lock);
+static LIST_HEAD(ras2_pcc_subspaces);
+
+static int ras2_report_cap_error(u32 cap_status)
+{
+ switch (cap_status) {
+ case ACPI_RAS2_NOT_VALID:
+ case ACPI_RAS2_NOT_SUPPORTED:
+ return -EPERM;
+ case ACPI_RAS2_BUSY:
+ return -EBUSY;
+ case ACPI_RAS2_FAILED:
+ case ACPI_RAS2_ABORTED:
+ case ACPI_RAS2_INVALID_DATA:
+ return -EINVAL;
+ default: /* 0 or other, Success */
+ return 0;
+ }
+}
+
+static int ras2_check_pcc_chan(struct ras2_pcc_subspace *pcc_subspace)
+{
+ struct acpi_ras2_shared_memory __iomem *generic_comm_base = pcc_subspace->pcc_comm_addr;
+ ktime_t next_deadline = ktime_add(ktime_get(), pcc_subspace->deadline);
+ u32 cap_status;
+ u16 status;
+ u32 ret;
+
+ while (!ktime_after(ktime_get(), next_deadline)) {
+ /*
+ * As per ACPI spec, the PCC space will be initialized by
+ * platform and should have set the command completion bit when
+ * PCC can be used by OSPM
+ */
+ status = readw_relaxed(&generic_comm_base->status);
+ if (status & RAS2_PCC_CMD_ERROR) {
+ cap_status = readw_relaxed(&generic_comm_base->set_capabilities_status);
+ ret = ras2_report_cap_error(cap_status);
+
+ status &= ~RAS2_PCC_CMD_ERROR;
+ writew_relaxed(status, &generic_comm_base->status);
+ return ret;
+ }
+ if (status & RAS2_PCC_CMD_COMPLETE)
+ return 0;
+ /*
+ * Reducing the bus traffic in case this loop takes longer than
+ * a few retries.
+ */
+ msleep(10);
+ }
+
+ return -EIO;
+}
+
+/**
+ * ras2_send_pcc_cmd() - Send RAS2 command via PCC channel
+ * @ras2_ctx: pointer to the RAS2 context structure
+ * @cmd: command to send
+ *
+ * Returns: 0 on success, an error otherwise
+ */
+int ras2_send_pcc_cmd(struct ras2_mem_ctx *ras2_ctx, u16 cmd)
+{
+ struct ras2_pcc_subspace *pcc_subspace = ras2_ctx->pcc_subspace;
+ struct acpi_ras2_shared_memory *generic_comm_base = pcc_subspace->pcc_comm_addr;
+ static ktime_t last_cmd_cmpl_time, last_mpar_reset;
+ struct mbox_chan *pcc_channel;
+ unsigned int time_delta;
+ static int mpar_count;
+ int ret;
+
+ guard(mutex)(&ras2_pcc_subspace_lock);
+ ret = ras2_check_pcc_chan(pcc_subspace);
+ if (ret < 0)
+ return ret;
+ pcc_channel = pcc_subspace->pcc_chan->mchan;
+
+ /*
+ * Handle the Minimum Request Turnaround Time(MRTT)
+ * "The minimum amount of time that OSPM must wait after the completion
+ * of a command before issuing the next command, in microseconds"
+ */
+ if (pcc_subspace->pcc_mrtt) {
+ time_delta = ktime_us_delta(ktime_get(), last_cmd_cmpl_time);
+ if (pcc_subspace->pcc_mrtt > time_delta)
+ udelay(pcc_subspace->pcc_mrtt - time_delta);
+ }
+
+ /*
+ * Handle the non-zero Maximum Periodic Access Rate(MPAR)
+ * "The maximum number of periodic requests that the subspace channel can
+ * support, reported in commands per minute. 0 indicates no limitation."
+ *
+ * This parameter should be ideally zero or large enough so that it can
+ * handle maximum number of requests that all the cores in the system can
+ * collectively generate. If it is not, we will follow the spec and just
+ * not send the request to the platform after hitting the MPAR limit in
+ * any 60s window
+ */
+ if (pcc_subspace->pcc_mpar) {
+ if (mpar_count == 0) {
+ time_delta = ktime_ms_delta(ktime_get(), last_mpar_reset);
+ if (time_delta < 60 * MSEC_PER_SEC) {
+ dev_dbg(ras2_ctx->dev,
+ "PCC cmd not sent due to MPAR limit");
+ return -EIO;
+ }
+ last_mpar_reset = ktime_get();
+ mpar_count = pcc_subspace->pcc_mpar;
+ }
+ mpar_count--;
+ }
+
+ /* Write to the shared comm region. */
+ writew_relaxed(cmd, &generic_comm_base->command);
+
+ /* Flip CMD COMPLETE bit */
+ writew_relaxed(0, &generic_comm_base->status);
+
+ /* Ring doorbell */
+ ret = mbox_send_message(pcc_channel, &cmd);
+ if (ret < 0) {
+ dev_err(ras2_ctx->dev,
+ "Err sending PCC mbox message. cmd:%d, ret:%d\n",
+ cmd, ret);
+ return ret;
+ }
+
+ /*
+ * If Minimum Request Turnaround Time is non-zero, we need
+ * to record the completion time of both READ and WRITE
+ * command for proper handling of MRTT, so we need to check
+ * for pcc_mrtt in addition to CMD_READ
+ */
+ if (cmd == RAS2_PCC_CMD_EXEC || pcc_subspace->pcc_mrtt) {
+ ret = ras2_check_pcc_chan(pcc_subspace);
+ if (pcc_subspace->pcc_mrtt)
+ last_cmd_cmpl_time = ktime_get();
+ }
+
+ if (pcc_channel->mbox->txdone_irq)
+ mbox_chan_txdone(pcc_channel, ret);
+ else
+ mbox_client_txdone(pcc_channel, ret);
+
+ return ret >= 0 ? 0 : ret;
+}
+EXPORT_SYMBOL_GPL(ras2_send_pcc_cmd);
+
+static int ras2_register_pcc_channel(struct ras2_mem_ctx *ras2_ctx, int pcc_subspace_id)
+{
+ struct ras2_pcc_subspace *pcc_subspace;
+ struct acpi_pcct_hw_reduced *ras2_ss;
+ struct pcc_mbox_chan *pcc_chan;
+ struct mbox_client *mbox_cl;
+
+ if (pcc_subspace_id < 0)
+ return -EINVAL;
+
+ mutex_lock(&ras2_pcc_subspace_lock);
+ list_for_each_entry(pcc_subspace, &ras2_pcc_subspaces, elem) {
+ if (pcc_subspace->pcc_subspace_id == pcc_subspace_id) {
+ ras2_ctx->pcc_subspace = pcc_subspace;
+ pcc_subspace->ref_count++;
+ mutex_unlock(&ras2_pcc_subspace_lock);
+ return 0;
+ }
+ }
+ mutex_unlock(&ras2_pcc_subspace_lock);
+
+ pcc_subspace = kcalloc(1, sizeof(*pcc_subspace), GFP_KERNEL);
+ if (!pcc_subspace)
+ return -ENOMEM;
+ mbox_cl = &pcc_subspace->mbox_client;
+ mbox_cl->knows_txdone = true;
+
+ pcc_chan = pcc_mbox_request_channel(mbox_cl, pcc_subspace_id);
+ if (IS_ERR(pcc_chan)) {
+ kfree(pcc_subspace);
+ return PTR_ERR(pcc_chan);
+ }
+ ras2_ss = pcc_chan->mchan->con_priv;
+ *pcc_subspace = (struct ras2_pcc_subspace) {
+ .pcc_subspace_id = pcc_subspace_id,
+ .pcc_chan = pcc_chan,
+ .pcc_comm_addr = acpi_os_ioremap(ras2_ss->base_address,
+ ras2_ss->length),
+ .deadline = ns_to_ktime(RAS2_NUM_RETRIES *
+ ras2_ss->latency *
+ NSEC_PER_USEC),
+ .pcc_mrtt = ras2_ss->min_turnaround_time,
+ .pcc_mpar = ras2_ss->max_access_rate,
+ .mbox_client = {
+ .knows_txdone = true,
+ },
+ .pcc_channel_acquired = true,
+ };
+ mutex_lock(&ras2_pcc_subspace_lock);
+ list_add(&pcc_subspace->elem, &ras2_pcc_subspaces);
+ pcc_subspace->ref_count++;
+ mutex_unlock(&ras2_pcc_subspace_lock);
+ ras2_ctx->pcc_subspace = pcc_subspace;
+ ras2_ctx->pcc_comm_addr = pcc_subspace->pcc_comm_addr;
+ ras2_ctx->dev = pcc_chan->mchan->mbox->dev;
+
+ return 0;
+}
+
+static DEFINE_IDA(ras2_ida);
+static void ras2_remove_pcc(struct ras2_mem_ctx *ras2_ctx)
+{
+ struct ras2_pcc_subspace *pcc_subspace = ras2_ctx->pcc_subspace;
+
+ guard(mutex)(&ras2_pcc_subspace_lock);
+ if (pcc_subspace->ref_count > 0)
+ pcc_subspace->ref_count--;
+ if (!pcc_subspace->ref_count) {
+ list_del(&pcc_subspace->elem);
+ pcc_mbox_free_channel(pcc_subspace->pcc_chan);
+ kfree(pcc_subspace);
+ }
+}
+
+static void ras2_release(struct device *device)
+{
+ struct auxiliary_device *auxdev = container_of(device, struct auxiliary_device, dev);
+ struct ras2_mem_ctx *ras2_ctx = container_of(auxdev, struct ras2_mem_ctx, adev);
+
+ ida_free(&ras2_ida, auxdev->id);
+ ras2_remove_pcc(ras2_ctx);
+ kfree(ras2_ctx);
+}
+
+static struct ras2_mem_ctx *ras2_add_aux_device(char *name, int channel)
+{
+ struct ras2_mem_ctx *ras2_ctx;
+ int id, ret;
+
+ ras2_ctx = kzalloc(sizeof(*ras2_ctx), GFP_KERNEL);
+ if (!ras2_ctx)
+ return ERR_PTR(-ENOMEM);
+
+ mutex_init(&ras2_ctx->lock);
+
+ ret = ras2_register_pcc_channel(ras2_ctx, channel);
+ if (ret < 0) {
+ pr_debug("failed to register pcc channel ret=%d\n", ret);
+ goto ctx_free;
+ }
+
+ id = ida_alloc(&ras2_ida, GFP_KERNEL);
+ if (id < 0) {
+ ret = id;
+ goto pcc_free;
+ }
+ ras2_ctx->id = id;
+ ras2_ctx->adev.id = id;
+ ras2_ctx->adev.name = RAS2_MEM_DEV_ID_NAME;
+ ras2_ctx->adev.dev.release = ras2_release;
+ ras2_ctx->adev.dev.parent = ras2_ctx->dev;
+
+ ret = auxiliary_device_init(&ras2_ctx->adev);
+ if (ret)
+ goto ida_free;
+
+ ret = auxiliary_device_add(&ras2_ctx->adev);
+ if (ret) {
+ auxiliary_device_uninit(&ras2_ctx->adev);
+ return ERR_PTR(ret);
+ }
+
+ return ras2_ctx;
+
+ida_free:
+ ida_free(&ras2_ida, id);
+pcc_free:
+ ras2_remove_pcc(ras2_ctx);
+ctx_free:
+ kfree(ras2_ctx);
+ return ERR_PTR(ret);
+}
+
+static int __init ras2_acpi_init(void)
+{
+ struct acpi_table_header *pAcpiTable = NULL;
+ struct acpi_ras2_pcc_desc *pcc_desc_list;
+ struct acpi_table_ras2 *pRas2Table;
+ struct ras2_mem_ctx *ras2_ctx;
+ int pcc_subspace_id;
+ acpi_size ras2_size;
+ acpi_status status;
+ u8 count = 0, i;
+ int ret = 0;
+
+ status = acpi_get_table("RAS2", 0, &pAcpiTable);
+ if (ACPI_FAILURE(status) || !pAcpiTable) {
+ pr_err("ACPI RAS2 driver failed to initialize, get table failed\n");
+ return -EINVAL;
+ }
+
+ ras2_size = pAcpiTable->length;
+ if (ras2_size < sizeof(struct acpi_table_ras2)) {
+ pr_err("ACPI RAS2 table present but broken (too short #1)\n");
+ ret = -EINVAL;
+ goto free_ras2_table;
+ }
+
+ pRas2Table = (struct acpi_table_ras2 *)pAcpiTable;
+ if (pRas2Table->num_pcc_descs <= 0) {
+ pr_err("ACPI RAS2 table does not contain PCC descriptors\n");
+ ret = -EINVAL;
+ goto free_ras2_table;
+ }
+
+ pcc_desc_list = (struct acpi_ras2_pcc_desc *)(pRas2Table + 1);
+ /* Double scan for the case of only one actual controller */
+ pcc_subspace_id = -1;
+ count = 0;
+ for (i = 0; i < pRas2Table->num_pcc_descs; i++, pcc_desc_list++) {
+ if (pcc_desc_list->feature_type != RAS2_FEATURE_TYPE_MEMORY)
+ continue;
+ if (pcc_subspace_id == -1) {
+ pcc_subspace_id = pcc_desc_list->channel_id;
+ count++;
+ }
+ if (pcc_desc_list->channel_id != pcc_subspace_id)
+ count++;
+ }
+ /*
+ * Workaround for the client platform with multiple scrub devices
+ * but uses single PCC subspace for communication.
+ */
+ if (count == 1) {
+ /* Add auxiliary device and bind ACPI RAS2 memory driver */
+ ras2_ctx = ras2_add_aux_device(RAS2_MEM_DEV_ID_NAME, pcc_subspace_id);
+ if (IS_ERR(ras2_ctx)) {
+ ret = PTR_ERR(ras2_ctx);
+ goto free_ras2_table;
+ }
+ acpi_put_table(pAcpiTable);
+ return 0;
+ }
+
+ pcc_desc_list = (struct acpi_ras2_pcc_desc *)(pRas2Table + 1);
+ count = 0;
+ for (i = 0; i < pRas2Table->num_pcc_descs; i++, pcc_desc_list++) {
+ if (pcc_desc_list->feature_type != RAS2_FEATURE_TYPE_MEMORY)
+ continue;
+ pcc_subspace_id = pcc_desc_list->channel_id;
+ /* Add auxiliary device and bind ACPI RAS2 memory driver */
+ ras2_ctx = ras2_add_aux_device(RAS2_MEM_DEV_ID_NAME, pcc_subspace_id);
+ if (IS_ERR(ras2_ctx)) {
+ ret = PTR_ERR(ras2_ctx);
+ goto free_ras2_table;
+ }
+ }
+
+free_ras2_table:
+ acpi_put_table(pAcpiTable);
+ return ret;
+}
+late_initcall(ras2_acpi_init)
diff --git a/include/acpi/ras2_acpi.h b/include/acpi/ras2_acpi.h
new file mode 100644
index 000000000000..7b32407ae2af
--- /dev/null
+++ b/include/acpi/ras2_acpi.h
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * RAS2 ACPI driver header file
+ *
+ * (C) Copyright 2014, 2015 Hewlett-Packard Enterprises
+ *
+ * Copyright (c) 2024 HiSilicon Limited
+ */
+
+#ifndef _RAS2_ACPI_H
+#define _RAS2_ACPI_H
+
+#include <linux/acpi.h>
+#include <linux/auxiliary_bus.h>
+#include <linux/mailbox_client.h>
+#include <linux/mutex.h>
+#include <linux/types.h>
+
+#define RAS2_PCC_CMD_COMPLETE BIT(0)
+#define RAS2_PCC_CMD_ERROR BIT(2)
+
+/* RAS2 specific PCC commands */
+#define RAS2_PCC_CMD_EXEC 0x01
+
+#define RAS2_AUX_DEV_NAME "ras2"
+#define RAS2_MEM_DEV_ID_NAME "acpi_ras2_mem"
+
+/* Data structure RAS2 table */
+struct ras2_mem_ctx {
+ struct auxiliary_device adev;
+ /* Lock to provide mutually exclusive access to PCC channel */
+ struct mutex lock;
+ int id;
+ u8 instance;
+ bool bg;
+ u64 base, size;
+ u8 scrub_cycle_hrs, min_scrub_cycle, max_scrub_cycle;
+ struct device *dev;
+ struct device *scrub_dev;
+ void *pcc_subspace;
+ struct acpi_ras2_shared_memory __iomem *pcc_comm_addr;
+};
+
+int ras2_send_pcc_cmd(struct ras2_mem_ctx *ras2_ctx, u16 cmd);
+#endif /* _RAS2_ACPI_H */
--
2.34.1
^ permalink raw reply [flat|nested] 30+ messages in thread
* [PATCH v14 10/14] ras: mem: Add memory ACPI RAS2 driver
2024-10-25 17:13 [PATCH v14 00/14] EDAC: Scrub: introduce generic EDAC RAS control feature driver + CXL/ACPI-RAS2 drivers shiju.jose
` (8 preceding siblings ...)
2024-10-25 17:13 ` [PATCH v14 09/14] ACPI:RAS2: Add ACPI RAS2 driver shiju.jose
@ 2024-10-25 17:13 ` shiju.jose
2024-10-25 17:13 ` [PATCH v14 11/14] EDAC: Add memory repair control feature shiju.jose
` (4 subsequent siblings)
14 siblings, 0 replies; 30+ messages in thread
From: shiju.jose @ 2024-10-25 17:13 UTC (permalink / raw)
To: linux-edac, linux-cxl, linux-acpi, linux-mm, linux-kernel
Cc: bp, tony.luck, rafael, lenb, mchehab, dan.j.williams, dave,
jonathan.cameron, gregkh, sudeep.holla, jassisinghbrar,
dave.jiang, alison.schofield, vishal.l.verma, ira.weiny, david,
Vilas.Sridharan, leo.duran, Yazen.Ghannam, rientjes, jiaqiyan,
Jon.Grimm, dave.hansen, naoya.horiguchi, james.morse, jthoughton,
somasundaram.a, erdemaktas, pgonda, duenwen, gthelen, wschwartz,
dferguson, wbs, nifan.cxl, yazen.ghannam, tanxiaofei, prime.zeng,
roberto.sassu, kangkang.shen, wanghuiqiang, linuxarm, shiju.jose
From: Shiju Jose <shiju.jose@huawei.com>
Memory ACPI RAS2 auxiliary driver binds to the auxiliary device
add by the ACPI RAS2 table parser.
Driver uses a PCC subspace for communicating with the ACPI compliant
platform.
Device with ACPI RAS2 scrub feature registers with EDAC device driver,
which retrieves the scrub descriptor from EDAC scrub and exposes
the scrub control attributes for RAS2 scrub instance to userspace in
/sys/bus/edac/devices/acpi_ras_mem0/scrubX/.
Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
---
Documentation/edac/edac-scrub.rst | 37 +++
drivers/ras/Kconfig | 10 +
drivers/ras/Makefile | 1 +
drivers/ras/acpi_ras2.c | 385 ++++++++++++++++++++++++++++++
4 files changed, 433 insertions(+)
create mode 100644 drivers/ras/acpi_ras2.c
diff --git a/Documentation/edac/edac-scrub.rst b/Documentation/edac/edac-scrub.rst
index 4aad4974b208..6cddcf738450 100644
--- a/Documentation/edac/edac-scrub.rst
+++ b/Documentation/edac/edac-scrub.rst
@@ -72,3 +72,40 @@ root@localhost:~# cat /sys/bus/edac/devices/cxl_region0/scrub0/enable_background
root@localhost:~# echo 0 > /sys/bus/edac/devices/cxl_region0/scrub0/enable_background
root@localhost:~# cat /sys/bus/edac/devices/cxl_region0/scrub0/enable_background
0
+
+2. RAS2
+2.1 On demand scrubbing for a specific memory region.
+root@localhost:~# cat /sys/bus/edac/devices/acpi_ras_mem0/scrub0/min_cycle_duration
+3600
+root@localhost:~# cat /sys/bus/edac/devices/acpi_ras_mem0/scrub0/max_cycle_duration
+86400
+root@localhost:~# cat /sys/bus/edac/devices/acpi_ras_mem0/scrub0/current_cycle_duration
+36000
+root@localhost:~# echo 54000 > /sys/bus/edac/devices/acpi_ras_mem0/scrub0/current_cycle_duration
+root@localhost:~# echo 0x150000 > /sys/bus/edac/devices/acpi_ras_mem0/scrub0/size
+# Write 'addr' starts demand scrubbing, please make sure other attributes are set prior to that.
+root@localhost:~# echo 0x120000 > /sys/bus/edac/devices/acpi_ras_mem0/scrub0/addr
+root@localhost:~# cat /sys/bus/edac/devices/acpi_ras_mem0/scrub0/current_cycle_duration
+54000
+# Readback 'addr', non-zero - demand scrub is in progress, zero - scrub is finished.
+root@localhost:~# cat /sys/bus/edac/devices/acpi_ras_mem0/scrub0/addr
+0x120000
+root@localhost:~# cat /sys/bus/edac/devices/acpi_ras_mem0/scrub0/addr
+0
+
+2.2 Background scrubbing the entire memory
+root@localhost:~# cat /sys/bus/edac/devices/acpi_ras_mem0/scrub0/min_cycle_duration
+3600
+root@localhost:~# cat /sys/bus/edac/devices/acpi_ras_mem0/scrub0/max_cycle_duration
+86400
+root@localhost:~# cat /sys/bus/edac/devices/acpi_ras_mem0/scrub0/current_cycle_duration
+36000
+root@localhost:~# cat /sys/bus/edac/devices/acpi_ras_mem0/scrub0/enable_background
+0
+root@localhost:~# echo 10800 > /sys/bus/edac/devices/acpi_ras_mem0/scrub0/current_cycle_duration
+root@localhost:~# echo 1 > /sys/bus/edac/devices/acpi_ras_mem0/scrub0/enable_background
+root@localhost:~# cat /sys/bus/edac/devices/acpi_ras_mem0/scrub0/enable_background
+1
+root@localhost:~# cat /sys/bus/edac/devices/acpi_ras_mem0/scrub0/current_cycle_duration
+10800
+root@localhost:~# echo 0 > /sys/bus/edac/devices/acpi_ras_mem0/scrub0/enable_background
diff --git a/drivers/ras/Kconfig b/drivers/ras/Kconfig
index fc4f4bb94a4c..b77790bdc73a 100644
--- a/drivers/ras/Kconfig
+++ b/drivers/ras/Kconfig
@@ -46,4 +46,14 @@ config RAS_FMPM
Memory will be retired during boot time and run time depending on
platform-specific policies.
+config MEM_ACPI_RAS2
+ tristate "Memory ACPI RAS2 driver"
+ depends on ACPI_RAS2
+ depends on EDAC
+ help
+ The driver binds to the platform device added by the ACPI RAS2
+ table parser. Use a PCC channel subspace for communicating with
+ the ACPI compliant platform to provide control of memory scrub
+ parameters to the user via the EDAC scrub.
+
endif
diff --git a/drivers/ras/Makefile b/drivers/ras/Makefile
index 11f95d59d397..a0e6e903d6b0 100644
--- a/drivers/ras/Makefile
+++ b/drivers/ras/Makefile
@@ -2,6 +2,7 @@
obj-$(CONFIG_RAS) += ras.o
obj-$(CONFIG_DEBUG_FS) += debugfs.o
obj-$(CONFIG_RAS_CEC) += cec.o
+obj-$(CONFIG_MEM_ACPI_RAS2) += acpi_ras2.o
obj-$(CONFIG_RAS_FMPM) += amd/fmpm.o
obj-y += amd/atl/
diff --git a/drivers/ras/acpi_ras2.c b/drivers/ras/acpi_ras2.c
new file mode 100644
index 000000000000..a73158e424a2
--- /dev/null
+++ b/drivers/ras/acpi_ras2.c
@@ -0,0 +1,385 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ACPI RAS2 memory driver
+ *
+ * Copyright (c) 2024 HiSilicon Limited.
+ *
+ */
+
+#define pr_fmt(fmt) "MEMORY ACPI RAS2: " fmt
+
+#include <linux/bitfield.h>
+#include <linux/edac.h>
+#include <linux/platform_device.h>
+#include <acpi/ras2_acpi.h>
+
+#define RAS2_DEV_NUM_RAS_FEATURES 1
+
+#define RAS2_SUPPORT_HW_PARTOL_SCRUB BIT(0)
+#define RAS2_TYPE_PATROL_SCRUB 0x0000
+
+#define RAS2_GET_PATROL_PARAMETERS 0x01
+#define RAS2_START_PATROL_SCRUBBER 0x02
+#define RAS2_STOP_PATROL_SCRUBBER 0x03
+
+#define RAS2_PATROL_SCRUB_SCHRS_IN_MASK GENMASK(15, 8)
+#define RAS2_PATROL_SCRUB_EN_BACKGROUND BIT(0)
+#define RAS2_PATROL_SCRUB_SCHRS_OUT_MASK GENMASK(7, 0)
+#define RAS2_PATROL_SCRUB_MIN_SCHRS_OUT_MASK GENMASK(15, 8)
+#define RAS2_PATROL_SCRUB_MAX_SCHRS_OUT_MASK GENMASK(23, 16)
+#define RAS2_PATROL_SCRUB_FLAG_SCRUBBER_RUNNING BIT(0)
+
+#define RAS2_SCRUB_NAME_LEN 128
+#define RAS2_HOUR_IN_SECS 3600
+
+struct acpi_ras2_ps_shared_mem {
+ struct acpi_ras2_shared_memory common;
+ struct acpi_ras2_patrol_scrub_parameter params;
+};
+
+static int ras2_is_patrol_scrub_support(struct ras2_mem_ctx *ras2_ctx)
+{
+ struct acpi_ras2_shared_memory __iomem *common = (void *)
+ ras2_ctx->pcc_comm_addr;
+
+ guard(mutex)(&ras2_ctx->lock);
+ common->set_capabilities[0] = 0;
+
+ return common->features[0] & RAS2_SUPPORT_HW_PARTOL_SCRUB;
+}
+
+static int ras2_update_patrol_scrub_params_cache(struct ras2_mem_ctx *ras2_ctx)
+{
+ struct acpi_ras2_ps_shared_mem __iomem *ps_sm = (void *)
+ ras2_ctx->pcc_comm_addr;
+ int ret;
+
+ ps_sm->common.set_capabilities[0] = RAS2_SUPPORT_HW_PARTOL_SCRUB;
+ ps_sm->params.patrol_scrub_command = RAS2_GET_PATROL_PARAMETERS;
+
+ ret = ras2_send_pcc_cmd(ras2_ctx, RAS2_PCC_CMD_EXEC);
+ if (ret) {
+ dev_err(ras2_ctx->dev, "failed to read parameters\n");
+ return ret;
+ }
+
+ ras2_ctx->min_scrub_cycle = FIELD_GET(RAS2_PATROL_SCRUB_MIN_SCHRS_OUT_MASK,
+ ps_sm->params.scrub_params_out);
+ ras2_ctx->max_scrub_cycle = FIELD_GET(RAS2_PATROL_SCRUB_MAX_SCHRS_OUT_MASK,
+ ps_sm->params.scrub_params_out);
+ if (!ras2_ctx->bg) {
+ ras2_ctx->base = ps_sm->params.actual_address_range[0];
+ ras2_ctx->size = ps_sm->params.actual_address_range[1];
+ }
+ ras2_ctx->scrub_cycle_hrs = FIELD_GET(RAS2_PATROL_SCRUB_SCHRS_OUT_MASK,
+ ps_sm->params.scrub_params_out);
+
+ return 0;
+}
+
+/* Context - lock must be held */
+static int ras2_get_patrol_scrub_running(struct ras2_mem_ctx *ras2_ctx,
+ bool *running)
+{
+ struct acpi_ras2_ps_shared_mem __iomem *ps_sm = (void *)
+ ras2_ctx->pcc_comm_addr;
+ int ret;
+
+ ps_sm->common.set_capabilities[0] = RAS2_SUPPORT_HW_PARTOL_SCRUB;
+ ps_sm->params.patrol_scrub_command = RAS2_GET_PATROL_PARAMETERS;
+
+ ret = ras2_send_pcc_cmd(ras2_ctx, RAS2_PCC_CMD_EXEC);
+ if (ret) {
+ dev_err(ras2_ctx->dev, "failed to read parameters\n");
+ return ret;
+ }
+
+ *running = ps_sm->params.flags & RAS2_PATROL_SCRUB_FLAG_SCRUBBER_RUNNING;
+
+ return 0;
+}
+
+static int ras2_hw_scrub_read_min_scrub_cycle(struct device *dev, void *drv_data,
+ u32 *min)
+{
+ struct ras2_mem_ctx *ras2_ctx = drv_data;
+
+ *min = ras2_ctx->min_scrub_cycle * RAS2_HOUR_IN_SECS;
+
+ return 0;
+}
+
+static int ras2_hw_scrub_read_max_scrub_cycle(struct device *dev, void *drv_data,
+ u32 *max)
+{
+ struct ras2_mem_ctx *ras2_ctx = drv_data;
+
+ *max = ras2_ctx->max_scrub_cycle * RAS2_HOUR_IN_SECS;
+
+ return 0;
+}
+
+static int ras2_hw_scrub_cycle_read(struct device *dev, void *drv_data,
+ u32 *scrub_cycle_secs)
+{
+ struct ras2_mem_ctx *ras2_ctx = drv_data;
+
+ *scrub_cycle_secs = ras2_ctx->scrub_cycle_hrs * RAS2_HOUR_IN_SECS;
+
+ return 0;
+}
+
+static int ras2_hw_scrub_cycle_write(struct device *dev, void *drv_data,
+ u32 scrub_cycle_secs)
+{
+ u8 scrub_cycle_hrs = scrub_cycle_secs / RAS2_HOUR_IN_SECS;
+ struct ras2_mem_ctx *ras2_ctx = drv_data;
+ bool running;
+ int ret;
+
+ guard(mutex)(&ras2_ctx->lock);
+ ret = ras2_get_patrol_scrub_running(ras2_ctx, &running);
+ if (ret)
+ return ret;
+
+ if (running)
+ return -EBUSY;
+
+ if (scrub_cycle_hrs < ras2_ctx->min_scrub_cycle ||
+ scrub_cycle_hrs > ras2_ctx->max_scrub_cycle)
+ return -EINVAL;
+
+ ras2_ctx->scrub_cycle_hrs = scrub_cycle_hrs;
+
+ return 0;
+}
+
+static int ras2_hw_scrub_read_addr(struct device *dev, void *drv_data, u64 *base)
+{
+ struct ras2_mem_ctx *ras2_ctx = drv_data;
+ int ret;
+
+ /*
+ * When BG scrubbing is enabled the actual address range is not valid.
+ * Return -EBUSY now unless find out a method to retrieve actual full PA range.
+ */
+ if (ras2_ctx->bg)
+ return -EBUSY;
+
+ /*
+ * When demand scrubbing is finished firmware must reset actual
+ * address range to 0. Otherwise userspace assumes demand scrubbing
+ * is in progress.
+ */
+ ret = ras2_update_patrol_scrub_params_cache(ras2_ctx);
+ if (ret)
+ return ret;
+ *base = ras2_ctx->base;
+
+ return 0;
+}
+
+static int ras2_hw_scrub_read_size(struct device *dev, void *drv_data, u64 *size)
+{
+ struct ras2_mem_ctx *ras2_ctx = drv_data;
+ int ret;
+
+ if (ras2_ctx->bg)
+ return -EBUSY;
+
+ ret = ras2_update_patrol_scrub_params_cache(ras2_ctx);
+ if (ret)
+ return ret;
+ *size = ras2_ctx->size;
+
+ return 0;
+}
+
+static int ras2_hw_scrub_write_addr(struct device *dev, void *drv_data, u64 base)
+{
+ struct ras2_mem_ctx *ras2_ctx = drv_data;
+ struct acpi_ras2_ps_shared_mem __iomem *ps_sm = (void *)
+ ras2_ctx->pcc_comm_addr;
+ bool running;
+ int ret;
+
+ guard(mutex)(&ras2_ctx->lock);
+ ps_sm->common.set_capabilities[0] = RAS2_SUPPORT_HW_PARTOL_SCRUB;
+ if (ras2_ctx->bg)
+ return -EBUSY;
+
+ if (!base || !ras2_ctx->size) {
+ dev_warn(ras2_ctx->dev,
+ "%s: Invalid address range, base=0x%llx "
+ "size=0x%llx\n", __func__,
+ base, ras2_ctx->size);
+ return -ERANGE;
+ }
+
+ ret = ras2_get_patrol_scrub_running(ras2_ctx, &running);
+ if (ret)
+ return ret;
+
+ if (running)
+ return -EBUSY;
+
+ ps_sm->params.scrub_params_in &= ~RAS2_PATROL_SCRUB_SCHRS_IN_MASK;
+ ps_sm->params.scrub_params_in |= FIELD_PREP(RAS2_PATROL_SCRUB_SCHRS_IN_MASK,
+ ras2_ctx->scrub_cycle_hrs);
+ ps_sm->params.requested_address_range[0] = base;
+ ps_sm->params.requested_address_range[1] = ras2_ctx->size;
+ ps_sm->params.scrub_params_in &= ~RAS2_PATROL_SCRUB_EN_BACKGROUND;
+ ps_sm->params.patrol_scrub_command = RAS2_START_PATROL_SCRUBBER;
+
+ ret = ras2_send_pcc_cmd(ras2_ctx, RAS2_PCC_CMD_EXEC);
+ if (ret) {
+ dev_err(ras2_ctx->dev, "Failed to start demand scrubbing\n");
+ return ret;
+ }
+
+ return ras2_update_patrol_scrub_params_cache(ras2_ctx);
+}
+
+static int ras2_hw_scrub_write_size(struct device *dev, void *drv_data, u64 size)
+{
+ struct ras2_mem_ctx *ras2_ctx = drv_data;
+ bool running;
+ int ret;
+
+ guard(mutex)(&ras2_ctx->lock);
+ ret = ras2_get_patrol_scrub_running(ras2_ctx, &running);
+ if (ret)
+ return ret;
+
+ if (running)
+ return -EBUSY;
+
+ if (!size) {
+ dev_warn(dev, "%s: Invalid address range size=0x%llx\n",
+ __func__, size);
+ return -EINVAL;
+ }
+
+ ras2_ctx->size = size;
+
+ return 0;
+}
+
+static int ras2_hw_scrub_set_enabled_bg(struct device *dev, void *drv_data, bool enable)
+{
+ struct ras2_mem_ctx *ras2_ctx = drv_data;
+ struct acpi_ras2_ps_shared_mem __iomem *ps_sm = (void *)
+ ras2_ctx->pcc_comm_addr;
+ bool running;
+ int ret;
+
+ guard(mutex)(&ras2_ctx->lock);
+ ps_sm->common.set_capabilities[0] = RAS2_SUPPORT_HW_PARTOL_SCRUB;
+ ret = ras2_get_patrol_scrub_running(ras2_ctx, &running);
+ if (ret)
+ return ret;
+ if (enable) {
+ if (ras2_ctx->bg || running)
+ return -EBUSY;
+ ps_sm->params.requested_address_range[0] = 0;
+ ps_sm->params.requested_address_range[1] = 0;
+ ps_sm->params.scrub_params_in &= ~RAS2_PATROL_SCRUB_SCHRS_IN_MASK;
+ ps_sm->params.scrub_params_in |= FIELD_PREP(RAS2_PATROL_SCRUB_SCHRS_IN_MASK,
+ ras2_ctx->scrub_cycle_hrs);
+ ps_sm->params.patrol_scrub_command = RAS2_START_PATROL_SCRUBBER;
+ } else {
+ if (!ras2_ctx->bg)
+ return -EPERM;
+ if (!ras2_ctx->bg && running)
+ return -EBUSY;
+ ps_sm->params.patrol_scrub_command = RAS2_STOP_PATROL_SCRUBBER;
+ }
+ ps_sm->params.scrub_params_in &= ~RAS2_PATROL_SCRUB_EN_BACKGROUND;
+ ps_sm->params.scrub_params_in |= FIELD_PREP(RAS2_PATROL_SCRUB_EN_BACKGROUND,
+ enable);
+ ret = ras2_send_pcc_cmd(ras2_ctx, RAS2_PCC_CMD_EXEC);
+ if (ret) {
+ dev_err(ras2_ctx->dev, "Failed to %s background scrubbing\n",
+ enable ? "enable" : "disable");
+ return ret;
+ }
+ if (enable) {
+ ras2_ctx->bg = true;
+ /* Update the cache to account for rounding of supplied parameters and similar */
+ ret = ras2_update_patrol_scrub_params_cache(ras2_ctx);
+ } else {
+ ret = ras2_update_patrol_scrub_params_cache(ras2_ctx);
+ ras2_ctx->bg = false;
+ }
+
+ return ret;
+}
+
+static int ras2_hw_scrub_get_enabled_bg(struct device *dev, void *drv_data, bool *enabled)
+{
+ struct ras2_mem_ctx *ras2_ctx = drv_data;
+
+ *enabled = ras2_ctx->bg;
+
+ return 0;
+}
+
+static const struct edac_scrub_ops ras2_scrub_ops = {
+ .read_addr = ras2_hw_scrub_read_addr,
+ .read_size = ras2_hw_scrub_read_size,
+ .write_addr = ras2_hw_scrub_write_addr,
+ .write_size = ras2_hw_scrub_write_size,
+ .get_enabled_bg = ras2_hw_scrub_get_enabled_bg,
+ .set_enabled_bg = ras2_hw_scrub_set_enabled_bg,
+ .get_min_cycle = ras2_hw_scrub_read_min_scrub_cycle,
+ .get_max_cycle = ras2_hw_scrub_read_max_scrub_cycle,
+ .get_cycle_duration = ras2_hw_scrub_cycle_read,
+ .set_cycle_duration = ras2_hw_scrub_cycle_write,
+};
+
+static int ras2_probe(struct auxiliary_device *auxdev,
+ const struct auxiliary_device_id *id)
+{
+ struct ras2_mem_ctx *ras2_ctx = container_of(auxdev, struct ras2_mem_ctx, adev);
+ struct edac_dev_feature ras_features[RAS2_DEV_NUM_RAS_FEATURES];
+ char scrub_name[RAS2_SCRUB_NAME_LEN];
+ int num_ras_features = 0;
+ int ret;
+
+ if (!ras2_is_patrol_scrub_support(ras2_ctx))
+ return -EOPNOTSUPP;
+
+ ret = ras2_update_patrol_scrub_params_cache(ras2_ctx);
+ if (ret)
+ return ret;
+
+ snprintf(scrub_name, sizeof(scrub_name), "acpi_ras_mem%d",
+ ras2_ctx->id);
+
+ ras_features[num_ras_features].ft_type = RAS_FEAT_SCRUB;
+ ras_features[num_ras_features].instance = ras2_ctx->instance;
+ ras_features[num_ras_features].scrub_ops = &ras2_scrub_ops;
+ ras_features[num_ras_features].ctx = ras2_ctx;
+ num_ras_features++;
+
+ return edac_dev_register(&auxdev->dev, scrub_name, NULL,
+ num_ras_features, ras_features);
+}
+
+static const struct auxiliary_device_id ras2_mem_dev_id_table[] = {
+ { .name = RAS2_AUX_DEV_NAME "." RAS2_MEM_DEV_ID_NAME, },
+ { },
+};
+
+MODULE_DEVICE_TABLE(auxiliary, ras2_mem_dev_id_table);
+
+static struct auxiliary_driver ras2_mem_driver = {
+ .name = RAS2_MEM_DEV_ID_NAME,
+ .probe = ras2_probe,
+ .id_table = ras2_mem_dev_id_table,
+};
+module_auxiliary_driver(ras2_mem_driver);
+
+MODULE_IMPORT_NS(ACPI_RAS2);
+MODULE_DESCRIPTION("ACPI RAS2 memory driver");
+MODULE_LICENSE("GPL");
--
2.34.1
^ permalink raw reply [flat|nested] 30+ messages in thread
* [PATCH v14 11/14] EDAC: Add memory repair control feature
2024-10-25 17:13 [PATCH v14 00/14] EDAC: Scrub: introduce generic EDAC RAS control feature driver + CXL/ACPI-RAS2 drivers shiju.jose
` (9 preceding siblings ...)
2024-10-25 17:13 ` [PATCH v14 10/14] ras: mem: Add memory " shiju.jose
@ 2024-10-25 17:13 ` shiju.jose
2024-10-25 17:13 ` [PATCH v14 12/14] cxl/mbox: Add support for PERFORM_MAINTENANCE mailbox command shiju.jose
` (3 subsequent siblings)
14 siblings, 0 replies; 30+ messages in thread
From: shiju.jose @ 2024-10-25 17:13 UTC (permalink / raw)
To: linux-edac, linux-cxl, linux-acpi, linux-mm, linux-kernel
Cc: bp, tony.luck, rafael, lenb, mchehab, dan.j.williams, dave,
jonathan.cameron, gregkh, sudeep.holla, jassisinghbrar,
dave.jiang, alison.schofield, vishal.l.verma, ira.weiny, david,
Vilas.Sridharan, leo.duran, Yazen.Ghannam, rientjes, jiaqiyan,
Jon.Grimm, dave.hansen, naoya.horiguchi, james.morse, jthoughton,
somasundaram.a, erdemaktas, pgonda, duenwen, gthelen, wschwartz,
dferguson, wbs, nifan.cxl, yazen.ghannam, tanxiaofei, prime.zeng,
roberto.sassu, kangkang.shen, wanghuiqiang, linuxarm, shiju.jose
From: Shiju Jose <shiju.jose@huawei.com>
Add generic EDAC memory repair control, eg. PPR(Post Package Repair),
memory sparing etc, control driver in order to control memory repairs
in the system. Supports sPPR(soft PPR), hPPR(hard PPR), soft/hard memory
sparing, memory sparing at cacheline/row/bank/rank granularity etc.
Device with memory repair features registers with EDAC device driver,
which retrieves memory repair descriptor from EDAC memory repair driver and
exposes the sysfs repair control attributes to userspace in
/sys/bus/edac/devices/<dev-name>/mem_repairX/.
The common memory repair control interface abstracts the control of an
arbitrary memory repair functionality to a common set of functions.
The sysfs memory repair attribute nodes are only present if the client
driver has implemented the corresponding attribute callback function and
passed in ops to the EDAC device driver during registration.
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
---
.../ABI/testing/sysfs-edac-mem-repair | 152 ++++++++
drivers/edac/Makefile | 2 +-
drivers/edac/edac_device.c | 31 ++
drivers/edac/mem_repair.c | 358 ++++++++++++++++++
include/linux/edac.h | 87 +++++
5 files changed, 629 insertions(+), 1 deletion(-)
create mode 100644 Documentation/ABI/testing/sysfs-edac-mem-repair
create mode 100755 drivers/edac/mem_repair.c
diff --git a/Documentation/ABI/testing/sysfs-edac-mem-repair b/Documentation/ABI/testing/sysfs-edac-mem-repair
new file mode 100644
index 000000000000..b2882f5f5a84
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-edac-mem-repair
@@ -0,0 +1,152 @@
+What: /sys/bus/edac/devices/<dev-name>/mem_repairX
+Date: Oct 2024
+KernelVersion: 6.12
+Contact: linux-edac@vger.kernel.org
+Description:
+ The sysfs EDAC bus devices /<dev-name>/mem_repairX subdirectory
+ belongs to the memory media repair features control, such as
+ PPR (Post Package Repair), memory sparing etc, where<dev-name>
+ directory corresponds to a device registered with the EDAC
+ device driver for the memory repair features.
+ Memory sparing is a repair function that replaces a portion
+ of memory (spared memory) with a portion of functional memory.
+ Memory sparing has cacheline/row/bank/rank sparing
+ granularities. The sysfs memory repair attr nodes are only
+ present if a memory repair feature is supported.
+
+What: /sys/bus/edac/devices/<dev-name>/mem_repairX/repair_type
+Date: Oct 2024
+KernelVersion: 6.12
+Contact: linux-edac@vger.kernel.org
+Description:
+ (RO) Type of the repair instance. For eg. sPPR, hPPR, cacheline/
+ row/bank/rank memory sparing etc.
+
+What: /sys/bus/edac/devices/<dev-name>/mem_repairX/persist_mode_avail
+Date: Oct 2024
+KernelVersion: 6.12
+Contact: linux-edac@vger.kernel.org
+Description:
+ (RO) Persist repair modes supported in the device.
+ 0 - Soft PPR(sPPR)/soft memory sparing (temporary repair).
+ 1 - Hard PPR(hPPR)/hard memory sparing (permanent repair).
+
+What: /sys/bus/edac/devices/<dev-name>/mem_repairX/persist_mode
+Date: Oct 2024
+KernelVersion: 6.12
+Contact: linux-edac@vger.kernel.org
+Description:
+ (RW) Current persist repair mode.
+ 0 - Soft PPR(sPPR)/soft memory sparing (temporary repair).
+ 1 - Hard PPR(hPPR)/hard memory sparing (permanent repair).
+
+What: /sys/bus/edac/devices/<dev-name>/mem_repairX/dpa_support
+Date: Oct 2024
+KernelVersion: 6.12
+Contact: linux-edac@vger.kernel.org
+Description:
+ (RO) True if supports DPA for repair(PPR, memory sparing, ...)
+ maintenance operation.
+
+What: /sys/bus/edac/devices/<dev-name>/mem_repairX/repair_safe_when_in_use
+Date: Oct 2024
+KernelVersion: 6.12
+Contact: linux-edac@vger.kernel.org
+Description:
+ (RO) True if memory media is accessible and data is retained
+ during the memory repair operation.
+
+What: /sys/bus/edac/devices/<dev-name>/mem_repairX/hpa
+Date: Oct 2024
+KernelVersion: 6.12
+Contact: linux-edac@vger.kernel.org
+Description:
+ (RW) HPA (Host Physical Address) for memory repair.
+
+What: /sys/bus/edac/devices/<dev-name>/mem_repairX/dpa
+Date: Oct 2024
+KernelVersion: 6.12
+Contact: linux-edac@vger.kernel.org
+Description:
+ (RW) DPA (Device Physical Address) for memory repair.
+
+What: /sys/bus/edac/devices/<dev-name>/mem_repairX/nibble_mask
+Date: Oct 2024
+KernelVersion: 6.12
+Contact: linux-edac@vger.kernel.org
+Description:
+ (RW) Nibble mask for memory repair.
+
+What: /sys/bus/edac/devices/<dev-name>/mem_repairX/bank_group
+Date: Oct 2024
+KernelVersion: 6.12
+Contact: linux-edac@vger.kernel.org
+Description:
+ (RW) Memory bank group for repair.
+
+What: /sys/bus/edac/devices/<dev-name>/mem_repairX/bank
+Date: Oct 2024
+KernelVersion: 6.12
+Contact: linux-edac@vger.kernel.org
+Description:
+ (RW) Memory bank for memory repair.
+
+What: /sys/bus/edac/devices/<dev-name>/mem_repairX/rank
+Date: Oct 2024
+KernelVersion: 6.12
+Contact: linux-edac@vger.kernel.org
+Description:
+ (RW) Memory rank for repair.
+
+What: /sys/bus/edac/devices/<dev-name>/mem_repairX/row
+Date: Oct 2024
+KernelVersion: 6.12
+Contact: linux-edac@vger.kernel.org
+Description:
+ (RW) Row for memory repair.
+
+What: /sys/bus/edac/devices/<dev-name>/mem_repairX/column
+Date: Oct 2024
+KernelVersion: 6.12
+Contact: linux-edac@vger.kernel.org
+Description:
+ (RW) Column for memory repair.
+
+What: /sys/bus/edac/devices/<dev-name>/mem_repairX/channel
+Date: Oct 2024
+KernelVersion: 6.12
+Contact: linux-edac@vger.kernel.org
+Description:
+ (RW) Channel for memory repair.
+
+What: /sys/bus/edac/devices/<dev-name>/mem_repairX/sub_channel
+Date: Oct 2024
+KernelVersion: 6.12
+Contact: linux-edac@vger.kernel.org
+Description:
+ (RW) Sub-channel for memory repair.
+
+What: /sys/bus/edac/devices/<dev-name>/mem_repairX/query
+Date: Oct 2024
+KernelVersion: 6.12
+Contact: linux-edac@vger.kernel.org
+Description:
+ (WO) Query whether the repair operation is supported for the
+ memory attributes set. Return failure if resources are
+ not available to perform repair.
+
+What: /sys/bus/edac/devices/<dev-name>/mem_repairX/repair
+Date: Oct 2024
+KernelVersion: 6.12
+Contact: linux-edac@vger.kernel.org
+Description:
+ (WO) Start the memory repair operation for the memory attributes
+ set. Return failure if resources are not available to
+ perform repair.
+ In some states of system configuration (e.g. before address
+ decoders have been configured), memory devices (e.g. CXL)
+ may not have an active mapping in the main host address
+ physical address map. As such, the memory to repair must be
+ identified by a device specific physical addressing scheme
+ using a DPA. The DPA to use will be presented in related
+ error records.
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index b24c2c112d9c..d037bce88487 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -10,7 +10,7 @@ obj-$(CONFIG_EDAC) := edac_core.o
edac_core-y := edac_mc.o edac_device.o edac_mc_sysfs.o
edac_core-y += edac_module.o edac_device_sysfs.o wq.o
-edac_core-y += scrub.o ecs.o
+edac_core-y += scrub.o ecs.o mem_repair.o
edac_core-$(CONFIG_EDAC_DEBUG) += debugfs.o
diff --git a/drivers/edac/edac_device.c b/drivers/edac/edac_device.c
index 5fc3ec7f25eb..f4c6f3a4a747 100644
--- a/drivers/edac/edac_device.c
+++ b/drivers/edac/edac_device.c
@@ -576,6 +576,7 @@ static void edac_dev_release(struct device *dev)
{
struct edac_dev_feat_ctx *ctx = container_of(dev, struct edac_dev_feat_ctx, dev);
+ kfree(ctx->mem_repair);
kfree(ctx->scrub);
kfree(ctx->dev.groups);
kfree(ctx);
@@ -610,6 +611,7 @@ int edac_dev_register(struct device *parent, char *name,
const struct edac_dev_feature *ras_features)
{
const struct attribute_group **ras_attr_groups;
+ int mem_repair_cnt = 0, mem_repair_inst = 0;
int scrub_cnt = 0, scrub_inst = 0;
struct edac_dev_data *dev_data;
struct edac_dev_feat_ctx *ctx;
@@ -626,6 +628,10 @@ int edac_dev_register(struct device *parent, char *name,
attr_gcnt++;
scrub_cnt++;
break;
+ case RAS_FEAT_MEM_REPAIR:
+ attr_gcnt++;
+ mem_repair_cnt++;
+ break;
case RAS_FEAT_ECS:
attr_gcnt += ras_features[feat].ecs_info.num_media_frus;
break;
@@ -652,6 +658,14 @@ int edac_dev_register(struct device *parent, char *name,
}
}
+ if (mem_repair_cnt) {
+ ctx->mem_repair = kcalloc(mem_repair_cnt, sizeof(*ctx->mem_repair), GFP_KERNEL);
+ if (!ctx->mem_repair) {
+ ret = -ENOMEM;
+ goto groups_free;
+ }
+ }
+
attr_gcnt = 0;
for (feat = 0; feat < num_features; feat++, ras_features++) {
switch (ras_features->ft_type) {
@@ -682,6 +696,21 @@ int edac_dev_register(struct device *parent, char *name,
goto data_mem_free;
attr_gcnt += ras_features->ecs_info.num_media_frus;
break;
+ case RAS_FEAT_MEM_REPAIR:
+ if (!ras_features->mem_repair_ops ||
+ mem_repair_inst != ras_features->instance)
+ goto data_mem_free;
+ dev_data = &ctx->mem_repair[mem_repair_inst];
+ dev_data->instance = mem_repair_inst;
+ dev_data->mem_repair_ops = ras_features->mem_repair_ops;
+ dev_data->private = ras_features->ctx;
+ ret = edac_mem_repair_get_desc(parent, &ras_attr_groups[attr_gcnt],
+ ras_features->instance);
+ if (ret)
+ goto data_mem_free;
+ mem_repair_inst++;
+ attr_gcnt++;
+ break;
default:
ret = -EINVAL;
goto data_mem_free;
@@ -708,6 +738,7 @@ int edac_dev_register(struct device *parent, char *name,
return devm_add_action_or_reset(parent, edac_dev_unreg, &ctx->dev);
data_mem_free:
+ kfree(ctx->mem_repair);
kfree(ctx->scrub);
groups_free:
kfree(ras_attr_groups);
diff --git a/drivers/edac/mem_repair.c b/drivers/edac/mem_repair.c
new file mode 100755
index 000000000000..87e328a35306
--- /dev/null
+++ b/drivers/edac/mem_repair.c
@@ -0,0 +1,358 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Generic EDAC memory repair driver in order to control the memory
+ * device with memory repair features, such as Post Package Repair (PPR),
+ * memory sparing features etc in the system.
+ * The common sysfs memory repair interface abstracts the control of an
+ * arbitrary memory repair functionality to a common set of functions.
+ *
+ * Copyright (c) 2024 HiSilicon Limited.
+ */
+
+#define pr_fmt(fmt) "EDAC MEM REPAIR: " fmt
+
+#include <linux/edac.h>
+
+enum edac_mem_repair_attributes {
+ MEM_REPAIR_TYPE,
+ MEM_REPAIR_PERSIST_MODE_AVAIL,
+ MEM_REPAIR_PERSIST_MODE,
+ MEM_REPAIR_DPA_SUPPORT,
+ MEM_REPAIR_SAFE_IN_USE,
+ MEM_REPAIR_HPA,
+ MEM_REPAIR_DPA,
+ MEM_REPAIR_NIBBLE_MASK,
+ MEM_REPAIR_BANK_GROUP,
+ MEM_REPAIR_BANK,
+ MEM_REPAIR_RANK,
+ MEM_REPAIR_ROW,
+ MEM_REPAIR_COLUMN,
+ MEM_REPAIR_CHANNEL,
+ MEM_REPAIR_SUB_CHANNEL,
+ MEM_REPAIR_QUERY,
+ MEM_DO_REPAIR,
+ MEM_REPAIR_MAX_ATTRS
+};
+
+struct edac_mem_repair_dev_attr {
+ struct device_attribute dev_attr;
+ u8 instance;
+};
+
+struct edac_mem_repair_context {
+ char name[EDAC_FEAT_NAME_LEN];
+ struct edac_mem_repair_dev_attr mem_repair_dev_attr[MEM_REPAIR_MAX_ATTRS];
+ struct attribute *mem_repair_attrs[MEM_REPAIR_MAX_ATTRS + 1];
+ struct attribute_group group;
+};
+
+#define TO_MEM_REPAIR_DEV_ATTR(_dev_attr) \
+ container_of(_dev_attr, struct edac_mem_repair_dev_attr, dev_attr)
+
+#define EDAC_MEM_REPAIR_ATTR_SHOW(attrib, cb, type, format) \
+static ssize_t attrib##_show(struct device *ras_feat_dev, \
+ struct device_attribute *attr, char *buf) \
+{ \
+ u8 inst = TO_MEM_REPAIR_DEV_ATTR(attr)->instance; \
+ struct edac_dev_feat_ctx *ctx = dev_get_drvdata(ras_feat_dev); \
+ const struct edac_mem_repair_ops *ops = \
+ ctx->mem_repair[inst].mem_repair_ops; \
+ type data; \
+ int ret; \
+ \
+ ret = ops->cb(ras_feat_dev->parent, ctx->mem_repair[inst].private, \
+ &data); \
+ if (ret) \
+ return ret; \
+ \
+ return sysfs_emit(buf, format, data); \
+}
+
+EDAC_MEM_REPAIR_ATTR_SHOW(repair_type, get_repair_type, u32, "%u\n")
+EDAC_MEM_REPAIR_ATTR_SHOW(persist_mode, get_persist_mode, u32, "%u\n")
+EDAC_MEM_REPAIR_ATTR_SHOW(dpa_support, get_dpa_support, u32, "%u\n")
+EDAC_MEM_REPAIR_ATTR_SHOW(repair_safe_when_in_use, get_repair_safe_when_in_use, u32, "%u\n")
+EDAC_MEM_REPAIR_ATTR_SHOW(hpa, get_hpa, u64, "0x%llx\n")
+EDAC_MEM_REPAIR_ATTR_SHOW(dpa, get_dpa, u64, "0x%llx\n")
+EDAC_MEM_REPAIR_ATTR_SHOW(nibble_mask, get_nibble_mask, u64, "0x%llx\n")
+EDAC_MEM_REPAIR_ATTR_SHOW(bank_group, get_bank_group, u32, "%u\n")
+EDAC_MEM_REPAIR_ATTR_SHOW(bank, get_bank, u32, "%u\n")
+EDAC_MEM_REPAIR_ATTR_SHOW(rank, get_rank, u32, "%u\n")
+EDAC_MEM_REPAIR_ATTR_SHOW(row, get_row, u64, "0x%llx\n")
+EDAC_MEM_REPAIR_ATTR_SHOW(column, get_column, u32, "%u\n")
+EDAC_MEM_REPAIR_ATTR_SHOW(channel, get_channel, u32, "%u\n")
+EDAC_MEM_REPAIR_ATTR_SHOW(sub_channel, get_sub_channel, u32, "%u\n")
+
+#define EDAC_MEM_REPAIR_ATTR_STORE(attrib, cb, type, conv_func) \
+static ssize_t attrib##_store(struct device *ras_feat_dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t len) \
+{ \
+ u8 inst = TO_MEM_REPAIR_DEV_ATTR(attr)->instance; \
+ struct edac_dev_feat_ctx *ctx = dev_get_drvdata(ras_feat_dev); \
+ const struct edac_mem_repair_ops *ops = \
+ ctx->mem_repair[inst].mem_repair_ops; \
+ type data; \
+ int ret; \
+ \
+ ret = conv_func(buf, 0, &data); \
+ if (ret < 0) \
+ return ret; \
+ \
+ ret = ops->cb(ras_feat_dev->parent, ctx->mem_repair[inst].private, \
+ data); \
+ if (ret) \
+ return ret; \
+ \
+ return len; \
+}
+
+EDAC_MEM_REPAIR_ATTR_STORE(persist_mode, set_persist_mode, unsigned long, kstrtoul)
+EDAC_MEM_REPAIR_ATTR_STORE(hpa, set_hpa, u64, kstrtou64)
+EDAC_MEM_REPAIR_ATTR_STORE(dpa, set_dpa, u64, kstrtou64)
+EDAC_MEM_REPAIR_ATTR_STORE(nibble_mask, set_nibble_mask, u64, kstrtou64)
+EDAC_MEM_REPAIR_ATTR_STORE(bank_group, set_bank_group, unsigned long, kstrtoul)
+EDAC_MEM_REPAIR_ATTR_STORE(bank, set_bank, unsigned long, kstrtoul)
+EDAC_MEM_REPAIR_ATTR_STORE(rank, set_rank, unsigned long, kstrtoul)
+EDAC_MEM_REPAIR_ATTR_STORE(row, set_row, u64, kstrtou64)
+EDAC_MEM_REPAIR_ATTR_STORE(column, set_column, unsigned long, kstrtoul)
+EDAC_MEM_REPAIR_ATTR_STORE(channel, set_channel, unsigned long, kstrtoul)
+EDAC_MEM_REPAIR_ATTR_STORE(sub_channel, set_sub_channel, unsigned long, kstrtoul)
+
+#define EDAC_MEM_REPAIR_DO_OP(attrib, cb) \
+static ssize_t attrib##_store(struct device *ras_feat_dev, \
+ struct device_attribute *attr, \
+ const char *buf, size_t len) \
+{ \
+ u8 inst = TO_MEM_REPAIR_DEV_ATTR(attr)->instance; \
+ struct edac_dev_feat_ctx *ctx = dev_get_drvdata(ras_feat_dev); \
+ const struct edac_mem_repair_ops *ops = ctx->mem_repair[inst].mem_repair_ops; \
+ int ret; \
+ \
+ ret = ops->cb(ras_feat_dev->parent, ctx->mem_repair[inst].private); \
+ if (ret) \
+ return ret; \
+ \
+ return len; \
+}
+
+EDAC_MEM_REPAIR_DO_OP(query, do_query)
+EDAC_MEM_REPAIR_DO_OP(repair, do_repair)
+
+static ssize_t persist_mode_avail_show(struct device *ras_feat_dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct edac_dev_feat_ctx *ctx = dev_get_drvdata(ras_feat_dev);
+ u8 inst = TO_MEM_REPAIR_DEV_ATTR(attr)->instance;
+ const struct edac_mem_repair_ops *ops = ctx->mem_repair[inst].mem_repair_ops;
+
+ return ops->get_persist_mode_avail(ras_feat_dev->parent,
+ ctx->mem_repair[inst].private, buf);
+}
+
+static umode_t mem_repair_attr_visible(struct kobject *kobj, struct attribute *a, int attr_id)
+{
+ struct device *ras_feat_dev = kobj_to_dev(kobj);
+ struct device_attribute *dev_attr = container_of(a, struct device_attribute, attr);
+ struct edac_dev_feat_ctx *ctx = dev_get_drvdata(ras_feat_dev);
+ u8 inst = TO_MEM_REPAIR_DEV_ATTR(dev_attr)->instance;
+ const struct edac_mem_repair_ops *ops = ctx->mem_repair[inst].mem_repair_ops;
+
+ switch (attr_id) {
+ case MEM_REPAIR_TYPE:
+ if (ops->get_repair_type)
+ return a->mode;
+ break;
+ case MEM_REPAIR_PERSIST_MODE_AVAIL:
+ if (ops->get_persist_mode_avail)
+ return a->mode;
+ break;
+ case MEM_REPAIR_PERSIST_MODE:
+ if (ops->get_persist_mode) {
+ if (ops->set_persist_mode)
+ return a->mode;
+ else
+ return 0444;
+ }
+ break;
+ case MEM_REPAIR_DPA_SUPPORT:
+ if (ops->get_dpa_support)
+ return a->mode;
+ break;
+ case MEM_REPAIR_SAFE_IN_USE:
+ if (ops->get_repair_safe_when_in_use)
+ return a->mode;
+ break;
+ case MEM_REPAIR_HPA:
+ if (ops->get_hpa) {
+ if (ops->set_hpa)
+ return a->mode;
+ else
+ return 0444;
+ }
+ break;
+ case MEM_REPAIR_DPA:
+ if (ops->get_dpa) {
+ if (ops->set_dpa)
+ return a->mode;
+ else
+ return 0444;
+ }
+ break;
+ case MEM_REPAIR_NIBBLE_MASK:
+ if (ops->get_nibble_mask) {
+ if (ops->set_nibble_mask)
+ return a->mode;
+ else
+ return 0444;
+ }
+ break;
+ case MEM_REPAIR_BANK_GROUP:
+ if (ops->get_bank_group) {
+ if (ops->set_bank_group)
+ return a->mode;
+ else
+ return 0444;
+ }
+ break;
+ case MEM_REPAIR_BANK:
+ if (ops->get_bank) {
+ if (ops->set_bank)
+ return a->mode;
+ else
+ return 0444;
+ }
+ break;
+ case MEM_REPAIR_RANK:
+ if (ops->get_rank) {
+ if (ops->set_rank)
+ return a->mode;
+ else
+ return 0444;
+ }
+ break;
+ case MEM_REPAIR_ROW:
+ if (ops->get_row) {
+ if (ops->set_row)
+ return a->mode;
+ else
+ return 0444;
+ }
+ break;
+ case MEM_REPAIR_COLUMN:
+ if (ops->get_column) {
+ if (ops->set_column)
+ return a->mode;
+ else
+ return 0444;
+ }
+ break;
+ case MEM_REPAIR_CHANNEL:
+ if (ops->get_channel) {
+ if (ops->set_channel)
+ return a->mode;
+ else
+ return 0444;
+ }
+ break;
+ case MEM_REPAIR_SUB_CHANNEL:
+ if (ops->get_sub_channel) {
+ if (ops->set_sub_channel)
+ return a->mode;
+ else
+ return 0444;
+ }
+ break;
+ case MEM_REPAIR_QUERY:
+ if (ops->do_query)
+ return a->mode;
+ break;
+ case MEM_DO_REPAIR:
+ if (ops->do_repair)
+ return a->mode;
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+#define EDAC_MEM_REPAIR_ATTR_RO(_name, _instance) \
+ ((struct edac_mem_repair_dev_attr) { .dev_attr = __ATTR_RO(_name), \
+ .instance = _instance })
+
+#define EDAC_MEM_REPAIR_ATTR_WO(_name, _instance) \
+ ((struct edac_mem_repair_dev_attr) { .dev_attr = __ATTR_WO(_name), \
+ .instance = _instance })
+
+#define EDAC_MEM_REPAIR_ATTR_RW(_name, _instance) \
+ ((struct edac_mem_repair_dev_attr) { .dev_attr = __ATTR_RW(_name), \
+ .instance = _instance })
+
+static int mem_repair_create_desc(struct device *dev,
+ const struct attribute_group **attr_groups, u8 instance)
+{
+ struct edac_mem_repair_context *ctx;
+ struct attribute_group *group;
+ int i;
+ struct edac_mem_repair_dev_attr dev_attr[] = {
+ [MEM_REPAIR_TYPE] = EDAC_MEM_REPAIR_ATTR_RO(repair_type, instance),
+ [MEM_REPAIR_PERSIST_MODE_AVAIL] =
+ EDAC_MEM_REPAIR_ATTR_RO(persist_mode_avail, instance),
+ [MEM_REPAIR_PERSIST_MODE] = EDAC_MEM_REPAIR_ATTR_RW(persist_mode, instance),
+ [MEM_REPAIR_DPA_SUPPORT] = EDAC_MEM_REPAIR_ATTR_RO(dpa_support, instance),
+ [MEM_REPAIR_SAFE_IN_USE] =
+ EDAC_MEM_REPAIR_ATTR_RO(repair_safe_when_in_use, instance),
+ [MEM_REPAIR_HPA] = EDAC_MEM_REPAIR_ATTR_RW(hpa, instance),
+ [MEM_REPAIR_DPA] = EDAC_MEM_REPAIR_ATTR_RW(dpa, instance),
+ [MEM_REPAIR_NIBBLE_MASK] = EDAC_MEM_REPAIR_ATTR_RW(nibble_mask, instance),
+ [MEM_REPAIR_BANK_GROUP] = EDAC_MEM_REPAIR_ATTR_RW(bank_group, instance),
+ [MEM_REPAIR_BANK] = EDAC_MEM_REPAIR_ATTR_RW(bank, instance),
+ [MEM_REPAIR_RANK] = EDAC_MEM_REPAIR_ATTR_RW(rank, instance),
+ [MEM_REPAIR_ROW] = EDAC_MEM_REPAIR_ATTR_RW(row, instance),
+ [MEM_REPAIR_COLUMN] = EDAC_MEM_REPAIR_ATTR_RW(column, instance),
+ [MEM_REPAIR_CHANNEL] = EDAC_MEM_REPAIR_ATTR_RW(channel, instance),
+ [MEM_REPAIR_SUB_CHANNEL] = EDAC_MEM_REPAIR_ATTR_RW(sub_channel, instance),
+ [MEM_REPAIR_QUERY] = EDAC_MEM_REPAIR_ATTR_WO(query, instance),
+ [MEM_DO_REPAIR] = EDAC_MEM_REPAIR_ATTR_WO(repair, instance)
+ };
+
+ ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ for (i = 0; i < MEM_REPAIR_MAX_ATTRS; i++) {
+ memcpy(&ctx->mem_repair_dev_attr[i].dev_attr, &dev_attr[i], sizeof(dev_attr[i]));
+ ctx->mem_repair_attrs[i] = &ctx->mem_repair_dev_attr[i].dev_attr.attr;
+ }
+ sprintf(ctx->name, "%s%d", "mem_repair", instance);
+ group = &ctx->group;
+ group->name = ctx->name;
+ group->attrs = ctx->mem_repair_attrs;
+ group->is_visible = mem_repair_attr_visible;
+
+ attr_groups[0] = group;
+
+ return 0;
+}
+
+/**
+ * edac_mem_repair_get_desc - get EDAC memory repair descriptors
+ * @dev: client device with memory repair feature
+ * @attr_groups: pointer to attribute group container
+ * @instance: device's memory repair instance number.
+ *
+ * Return:
+ * * %0 - Success.
+ * * %-EINVAL - Invalid parameters passed.
+ * * %-ENOMEM - Dynamic memory allocation failed.
+ */
+int edac_mem_repair_get_desc(struct device *dev,
+ const struct attribute_group **attr_groups, u8 instance)
+{
+ if (!dev || !attr_groups)
+ return -EINVAL;
+
+ return mem_repair_create_desc(dev, attr_groups, instance);
+}
diff --git a/include/linux/edac.h b/include/linux/edac.h
index 077d3c252e99..7d037bb18904 100644
--- a/include/linux/edac.h
+++ b/include/linux/edac.h
@@ -670,6 +670,7 @@ static inline struct dimm_info *edac_get_dimm(struct mem_ctl_info *mci,
enum edac_dev_feat {
RAS_FEAT_SCRUB,
RAS_FEAT_ECS,
+ RAS_FEAT_MEM_REPAIR,
RAS_FEAT_MAX
};
@@ -741,11 +742,95 @@ int edac_ecs_get_desc(struct device *ecs_dev,
const struct attribute_group **attr_groups,
u16 num_media_frus);
+enum edac_mem_repair_type {
+ EDAC_TYPE_SPPR,
+ EDAC_TYPE_HPPR,
+ EDAC_TYPE_CACHELINE_MEM_SPARING,
+ EDAC_TYPE_ROW_MEM_SPARING,
+ EDAC_TYPE_BANK_MEM_SPARING,
+ EDAC_TYPE_RANK_MEM_SPARING,
+};
+
+enum edac_mem_repair_persist_mode {
+ EDAC_MEM_REPAIR_SOFT, /* soft memory repair */
+ EDAC_MEM_REPAIR_HARD, /* hard memory repair */
+};
+
+/**
+ * struct edac_mem_repair_ops - memory repair device operations
+ * (all elements optional)
+ * @get_repair_type: get the memory repair type, listed in enum edac_mem_repair_type.
+ * @get_persist_mode_avail: get the persist modes supported in the device.
+ * @get_persist_mode: get the persist mode of the memory repair instance.
+ * @set_persist_mode: set the persist mode for the memory repair instance.
+ * @get_dpa_support: get dpa support flag.
+ * @get_repair_safe_when_in_use: get whether memory media is accessible and
+ * data is retained during repair operation.
+ * @get_hpa: get HPA for memory repair.
+ * @set_hpa: set HPA for memory repair.
+ * @get_dpa: get DPA for memory repair.
+ * @set_dpa: set DPA for memory repair.
+ * @get_nibble_mask: get nibble mask for memory repair.
+ * @set_nibble_mask: set nibble mask for memory repair.
+ * @get_bank_group: get bank group for memory repair.
+ * @set_bank_group: set bank group for memory repair.
+ * @get_bank: get bank for memory repair.
+ * @set_bank: set bank for memory repair.
+ * @get_rank: get rank for memory repair.
+ * @set_rank: set rank for memory repair.
+ * @get_row: get row for memory repair.
+ * @set_row: set row for memory repair.
+ * @get_column: get column for memory repair.
+ * @set_column: set column for memory repair.
+ * @get_channel: get channel for memory repair.
+ * @set_channel: set channel for memory repair.
+ * @get_sub_channel: get sub channel for memory repair.
+ * @set_sub_channel: set sub channel for memory repair.
+ * @do_query: Query memory repair operation for the HPA/DPA/other attrs set
+ * is supported or not.
+ * @do_repair: start memory repair operation for the HPA/DPA/other attrs set.
+ */
+struct edac_mem_repair_ops {
+ int (*get_repair_type)(struct device *dev, void *drv_data, u32 *val);
+ int (*get_persist_mode_avail)(struct device *dev, void *drv_data, char *buf);
+ int (*get_persist_mode)(struct device *dev, void *drv_data, u32 *mode);
+ int (*set_persist_mode)(struct device *dev, void *drv_data, u32 mode);
+ int (*get_dpa_support)(struct device *dev, void *drv_data, u32 *val);
+ int (*get_repair_safe_when_in_use)(struct device *dev, void *drv_data, u32 *val);
+ int (*get_hpa)(struct device *dev, void *drv_data, u64 *hpa);
+ int (*set_hpa)(struct device *dev, void *drv_data, u64 hpa);
+ int (*get_dpa)(struct device *dev, void *drv_data, u64 *dpa);
+ int (*set_dpa)(struct device *dev, void *drv_data, u64 dpa);
+ int (*get_nibble_mask)(struct device *dev, void *drv_data, u64 *val);
+ int (*set_nibble_mask)(struct device *dev, void *drv_data, u64 val);
+ int (*get_bank_group)(struct device *dev, void *drv_data, u32 *val);
+ int (*set_bank_group)(struct device *dev, void *drv_data, u32 val);
+ int (*get_bank)(struct device *dev, void *drv_data, u32 *val);
+ int (*set_bank)(struct device *dev, void *drv_data, u32 val);
+ int (*get_rank)(struct device *dev, void *drv_data, u32 *val);
+ int (*set_rank)(struct device *dev, void *drv_data, u32 val);
+ int (*get_row)(struct device *dev, void *drv_data, u64 *val);
+ int (*set_row)(struct device *dev, void *drv_data, u64 val);
+ int (*get_column)(struct device *dev, void *drv_data, u32 *val);
+ int (*set_column)(struct device *dev, void *drv_data, u32 val);
+ int (*get_channel)(struct device *dev, void *drv_data, u32 *val);
+ int (*set_channel)(struct device *dev, void *drv_data, u32 val);
+ int (*get_sub_channel)(struct device *dev, void *drv_data, u32 *val);
+ int (*set_sub_channel)(struct device *dev, void *drv_data, u32 val);
+ int (*do_query)(struct device *dev, void *drv_data);
+ int (*do_repair)(struct device *dev, void *drv_data);
+};
+
+int edac_mem_repair_get_desc(struct device *dev,
+ const struct attribute_group **attr_groups,
+ u8 instance);
+
/* EDAC device feature information structure */
struct edac_dev_data {
union {
const struct edac_scrub_ops *scrub_ops;
const struct edac_ecs_ops *ecs_ops;
+ const struct edac_mem_repair_ops *mem_repair_ops;
};
u8 instance;
void *private;
@@ -756,6 +841,7 @@ struct edac_dev_feat_ctx {
void *private;
struct edac_dev_data *scrub;
struct edac_dev_data ecs;
+ struct edac_dev_data *mem_repair;
};
struct edac_dev_feature {
@@ -764,6 +850,7 @@ struct edac_dev_feature {
union {
const struct edac_scrub_ops *scrub_ops;
const struct edac_ecs_ops *ecs_ops;
+ const struct edac_mem_repair_ops *mem_repair_ops;
};
void *ctx;
struct edac_ecs_ex_info ecs_info;
--
2.34.1
^ permalink raw reply [flat|nested] 30+ messages in thread
* [PATCH v14 12/14] cxl/mbox: Add support for PERFORM_MAINTENANCE mailbox command
2024-10-25 17:13 [PATCH v14 00/14] EDAC: Scrub: introduce generic EDAC RAS control feature driver + CXL/ACPI-RAS2 drivers shiju.jose
` (10 preceding siblings ...)
2024-10-25 17:13 ` [PATCH v14 11/14] EDAC: Add memory repair control feature shiju.jose
@ 2024-10-25 17:13 ` shiju.jose
2024-10-25 17:13 ` [PATCH v14 13/14] cxl/memfeature: Add CXL memory device sPPR control feature shiju.jose
` (2 subsequent siblings)
14 siblings, 0 replies; 30+ messages in thread
From: shiju.jose @ 2024-10-25 17:13 UTC (permalink / raw)
To: linux-edac, linux-cxl, linux-acpi, linux-mm, linux-kernel
Cc: bp, tony.luck, rafael, lenb, mchehab, dan.j.williams, dave,
jonathan.cameron, gregkh, sudeep.holla, jassisinghbrar,
dave.jiang, alison.schofield, vishal.l.verma, ira.weiny, david,
Vilas.Sridharan, leo.duran, Yazen.Ghannam, rientjes, jiaqiyan,
Jon.Grimm, dave.hansen, naoya.horiguchi, james.morse, jthoughton,
somasundaram.a, erdemaktas, pgonda, duenwen, gthelen, wschwartz,
dferguson, wbs, nifan.cxl, yazen.ghannam, tanxiaofei, prime.zeng,
roberto.sassu, kangkang.shen, wanghuiqiang, linuxarm, shiju.jose
From: Shiju Jose <shiju.jose@huawei.com>
Add support for PERFORM_MAINTENANCE mailbox command.
CXL spec 3.1 section 8.2.9.7.1 describes the Perform Maintenance command.
This command requests the device to execute the maintenance operation
specified by the maintenance operation class and the maintenance operation
subclass.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
---
drivers/cxl/core/mbox.c | 35 +++++++++++++++++++++++++++++++++++
drivers/cxl/cxlmem.h | 17 +++++++++++++++++
2 files changed, 52 insertions(+)
diff --git a/drivers/cxl/core/mbox.c b/drivers/cxl/core/mbox.c
index 4b9e62de164b..381cf9d61c85 100644
--- a/drivers/cxl/core/mbox.c
+++ b/drivers/cxl/core/mbox.c
@@ -1084,6 +1084,41 @@ int cxl_set_feature(struct cxl_memdev_state *mds,
}
EXPORT_SYMBOL_NS_GPL(cxl_set_feature, CXL);
+int cxl_do_maintenance(struct cxl_memdev_state *mds,
+ u8 class, u8 subclass,
+ void *data_in, size_t data_in_size)
+{
+ struct cxl_mailbox *cxl_mbox = &mds->cxlds.cxl_mbox;
+ struct cxl_memdev_maintenance_pi {
+ struct cxl_mbox_do_maintenance_hdr hdr;
+ u8 data[];
+ } __packed;
+ struct cxl_mbox_cmd mbox_cmd;
+ size_t hdr_size;
+
+ struct cxl_memdev_maintenance_pi *pi __free(kfree) =
+ kmalloc(cxl_mbox->payload_size, GFP_KERNEL);
+ pi->hdr.op_class = class;
+ pi->hdr.op_subclass = subclass;
+ hdr_size = sizeof(pi->hdr);
+ /*
+ * Check minimum mbox payload size is available for
+ * the maintenance data transfer.
+ */
+ if (hdr_size + data_in_size > cxl_mbox->payload_size)
+ return -ENOMEM;
+
+ memcpy(pi->data, data_in, data_in_size);
+ mbox_cmd = (struct cxl_mbox_cmd) {
+ .opcode = CXL_MBOX_OP_DO_MAINTENANCE,
+ .size_in = hdr_size + data_in_size,
+ .payload_in = pi,
+ };
+
+ return cxl_internal_send_cmd(cxl_mbox, &mbox_cmd);
+}
+EXPORT_SYMBOL_NS_GPL(cxl_do_maintenance, CXL);
+
/**
* cxl_enumerate_cmds() - Enumerate commands for a device.
* @mds: The driver data for the operation
diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
index 9259c5d70a65..28290f7c89f7 100644
--- a/drivers/cxl/cxlmem.h
+++ b/drivers/cxl/cxlmem.h
@@ -533,6 +533,7 @@ enum cxl_opcode {
CXL_MBOX_OP_GET_SUPPORTED_FEATURES = 0x0500,
CXL_MBOX_OP_GET_FEATURE = 0x0501,
CXL_MBOX_OP_SET_FEATURE = 0x0502,
+ CXL_MBOX_OP_DO_MAINTENANCE = 0x0600,
CXL_MBOX_OP_IDENTIFY = 0x4000,
CXL_MBOX_OP_GET_PARTITION_INFO = 0x4100,
CXL_MBOX_OP_SET_PARTITION_INFO = 0x4101,
@@ -909,6 +910,19 @@ struct cxl_mbox_set_feat_hdr {
u8 rsvd[9];
} __packed;
+/*
+ * Perform Maintenance CXL 3.1 Spec 8.2.9.7.1
+ */
+
+/*
+ * Perform Maintenance input payload
+ * CXL rev 3.1 section 8.2.9.7.1 Table 8-102
+ */
+struct cxl_mbox_do_maintenance_hdr {
+ u8 op_class;
+ u8 op_subclass;
+} __packed;
+
int cxl_internal_send_cmd(struct cxl_mailbox *cxl_mbox,
struct cxl_mbox_cmd *cmd);
int cxl_dev_state_identify(struct cxl_memdev_state *mds);
@@ -986,4 +1000,7 @@ int cxl_set_feature(struct cxl_memdev_state *mds,
const uuid_t feat_uuid, u8 feat_version,
void *feat_data, size_t feat_data_size,
u8 feat_flag);
+int cxl_do_maintenance(struct cxl_memdev_state *mds,
+ u8 class, u8 subclass,
+ void *data_in, size_t data_in_size);
#endif /* __CXL_MEM_H__ */
--
2.34.1
^ permalink raw reply [flat|nested] 30+ messages in thread
* [PATCH v14 13/14] cxl/memfeature: Add CXL memory device sPPR control feature
2024-10-25 17:13 [PATCH v14 00/14] EDAC: Scrub: introduce generic EDAC RAS control feature driver + CXL/ACPI-RAS2 drivers shiju.jose
` (11 preceding siblings ...)
2024-10-25 17:13 ` [PATCH v14 12/14] cxl/mbox: Add support for PERFORM_MAINTENANCE mailbox command shiju.jose
@ 2024-10-25 17:13 ` shiju.jose
2024-10-25 17:13 ` [PATCH v14 14/14] cxl/memfeature: Add CXL memory device memory sparing " shiju.jose
2024-10-26 10:35 ` [PATCH v14 00/14] EDAC: Scrub: introduce generic EDAC RAS control feature driver + CXL/ACPI-RAS2 drivers Borislav Petkov
14 siblings, 0 replies; 30+ messages in thread
From: shiju.jose @ 2024-10-25 17:13 UTC (permalink / raw)
To: linux-edac, linux-cxl, linux-acpi, linux-mm, linux-kernel
Cc: bp, tony.luck, rafael, lenb, mchehab, dan.j.williams, dave,
jonathan.cameron, gregkh, sudeep.holla, jassisinghbrar,
dave.jiang, alison.schofield, vishal.l.verma, ira.weiny, david,
Vilas.Sridharan, leo.duran, Yazen.Ghannam, rientjes, jiaqiyan,
Jon.Grimm, dave.hansen, naoya.horiguchi, james.morse, jthoughton,
somasundaram.a, erdemaktas, pgonda, duenwen, gthelen, wschwartz,
dferguson, wbs, nifan.cxl, yazen.ghannam, tanxiaofei, prime.zeng,
roberto.sassu, kangkang.shen, wanghuiqiang, linuxarm, shiju.jose
From: Shiju Jose <shiju.jose@huawei.com>
Post Package Repair (PPR) maintenance operations may be supported by CXL
devices that implement CXL.mem protocol. A PPR maintenance operation
requests the CXL device to perform a repair operation on its media.
For example, a CXL device with DRAM components that support PPR features
may implement PPR Maintenance operations. DRAM components may support two
types of PPR: Hard PPR (hPPR), for a permanent row repair, and Soft PPR
(sPPR), for a temporary row repair. sPPR is much faster than hPPR, but the
repair is lost with a power cycle.
During the execution of a PPR Maintenance operation, a CXL memory device:
- May or may not retain data
- May or may not be able to process CXL.mem requests correctly, including
the ones that target the DPA involved in the repair.
These CXL Memory Device capabilities are specified by Restriction Flags
in the sPPR Feature and hPPR Feature.
sPPR maintenance operation may be executed at runtime, if data is retained
and CXL.mem requests are correctly processed. For CXL devices with DRAM
components, hPPR maintenance operation may be executed only at boot because
data would not be retained.
When a CXL device identifies a failure on a memory component, the device
may inform the host about the need for a PPR maintenance operation by using
an Event Record, where the Maintenance Needed flag is set. The Event Record
specifies the DPA that should be repaired. A CXL device may not keep track
of the requests that have already been sent and the information on which
DPA should be repaired may be lost upon power cycle.
The userspace tool requests for maintenance operation if the number of
corrected error reported on a CXL.mem media exceeds error threshold.
CXL spec 3.1 section 8.2.9.7.1.2 describes the device's sPPR (soft PPR)
maintenance operation and section 8.2.9.7.1.3 describes the device's
hPPR (hard PPR) maintenance operation feature.
CXL spec 3.1 section 8.2.9.7.2.1 describes the sPPR feature discovery and
configuration.
CXL spec 3.1 section 8.2.9.7.2.2 describes the hPPR feature discovery and
configuration.
Add support for controlling CXL memory device sPPR feature.
Register with EDAC driver, which gets the memory repair attr descriptors
from the EDAC memory repair driver and exposes sysfs repair control
attributes for PRR to the userspace. For example CXL PPR control for the
CXL mem0 device is exposed in /sys/bus/edac/devices/cxl_mem0/mem_repairX/
Tested with QEMU patch for CXL PPR feature.
https://lore.kernel.org/all/20240730045722.71482-1-dave@stgolabs.net/
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
---
drivers/cxl/core/memfeature.c | 366 +++++++++++++++++++++++++++++++++-
1 file changed, 365 insertions(+), 1 deletion(-)
diff --git a/drivers/cxl/core/memfeature.c b/drivers/cxl/core/memfeature.c
index 26ba360165db..00635e709c9d 100644
--- a/drivers/cxl/core/memfeature.c
+++ b/drivers/cxl/core/memfeature.c
@@ -18,8 +18,9 @@
#include <linux/limits.h>
#include <cxl.h>
#include <cxlmem.h>
+#include "core.h"
-#define CXL_DEV_NUM_RAS_FEATURES 2
+#define CXL_DEV_NUM_RAS_FEATURES 3
#define CXL_DEV_HOUR_IN_SECS 3600
#define CXL_SCRUB_NAME_LEN 128
@@ -629,17 +630,347 @@ static const struct edac_ecs_ops cxl_ecs_ops = {
.set_threshold = cxl_ecs_set_threshold,
};
+/* CXL memory soft PPR & hard PPR control definitions */
+/* See CXL rev 3.1 @8.2.9.7.2 Table 8-110 Maintenance Operation */
+static const uuid_t cxl_sppr_uuid =
+ UUID_INIT(0x892ba475, 0xfad8, 0x474e, 0x9d, 0x3e, 0x69, 0x2c, 0x91, 0x75, 0x68, 0xbb);
+
+static const uuid_t cxl_hppr_uuid =
+ UUID_INIT(0x80ea4521, 0x786f, 0x4127, 0xaf, 0xb1, 0xec, 0x74, 0x59, 0xfb, 0x0e, 0x24);
+
+struct cxl_ppr_context {
+ uuid_t repair_uuid;
+ u8 instance;
+ u16 get_feat_size;
+ u16 set_feat_size;
+ u8 get_version;
+ u8 set_version;
+ u16 set_effects;
+ struct cxl_memdev *cxlmd;
+ enum edac_mem_repair_type repair_type;
+ enum edac_mem_repair_persist_mode persist_mode;
+ u64 dpa;
+ u32 nibble_mask;
+};
+
+/**
+ * struct cxl_memdev_ppr_params - CXL memory PPR parameter data structure.
+ * @op_class: PPR operation class.
+ * @op_subclass: PPR operation subclass.
+ * @dpa_support: device physical address for PPR support.
+ * @media_accessible: memory media is accessible or not during PPR operation.
+ * @data_retained: data is retained or not during PPR operation.
+ * @dpa: device physical address.
+ */
+struct cxl_memdev_ppr_params {
+ u8 op_class;
+ u8 op_subclass;
+ bool dpa_support;
+ bool media_accessible;
+ bool data_retained;
+ u64 dpa;
+};
+
+enum cxl_ppr_param {
+ CXL_PPR_PARAM_DO_QUERY,
+ CXL_PPR_PARAM_DO_PPR,
+};
+
+/* See CXL rev 3.1 @8.2.9.7.2.1 Table 8-113 sPPR Feature Readable Attributes */
+/* See CXL rev 3.1 @8.2.9.7.2.2 Table 8-116 hPPR Feature Readable Attributes */
+#define CXL_MEMDEV_PPR_QUERY_RESOURCE_FLAG BIT(0)
+
+#define CXL_MEMDEV_PPR_DEVICE_INITIATED_MASK BIT(0)
+#define CXL_MEMDEV_PPR_FLAG_DPA_SUPPORT_MASK BIT(0)
+#define CXL_MEMDEV_PPR_FLAG_NIBBLE_SUPPORT_MASK BIT(1)
+#define CXL_MEMDEV_PPR_FLAG_MEM_SPARING_EV_REC_SUPPORT_MASK BIT(2)
+
+#define CXL_MEMDEV_PPR_RESTRICTION_FLAG_MEDIA_ACCESSIBLE_MASK BIT(0)
+#define CXL_MEMDEV_PPR_RESTRICTION_FLAG_DATA_RETAINED_MASK BIT(2)
+
+#define CXL_MEMDEV_PPR_SPARING_EV_REC_EN_MASK BIT(0)
+
+struct cxl_memdev_repair_rd_attrs_hdr {
+ u8 max_op_latency;
+ __le16 op_cap;
+ __le16 op_mode;
+ u8 op_class;
+ u8 op_subclass;
+ u8 rsvd[9];
+} __packed;
+
+struct cxl_memdev_ppr_rd_attrs {
+ struct cxl_memdev_repair_rd_attrs_hdr hdr;
+ u8 ppr_flags;
+ __le16 restriction_flags;
+ u8 ppr_op_mode;
+} __packed;
+
+/* See CXL rev 3.1 @8.2.9.7.2.1 Table 8-114 sPPR Feature Writable Attributes */
+/* See CXL rev 3.1 @8.2.9.7.2.2 Table 8-117 hPPR Feature Writable Attributes */
+struct cxl_memdev_ppr_wr_attrs {
+ __le16 op_mode;
+ u8 ppr_op_mode;
+} __packed;
+
+/* See CXL rev 3.1 @8.2.9.7.1.2 Table 8-103 sPPR Maintenance Input Payload */
+/* See CXL rev 3.1 @8.2.9.7.1.3 Table 8-104 hPPR Maintenance Input Payload */
+struct cxl_memdev_ppr_maintenance_attrs {
+ u8 flags;
+ __le64 dpa;
+ u8 nibble_mask[3];
+} __packed;
+
+static int cxl_mem_ppr_get_attrs(struct device *dev, void *drv_data,
+ struct cxl_memdev_ppr_params *params)
+{
+ struct cxl_ppr_context *cxl_ppr_ctx = drv_data;
+ struct cxl_memdev *cxlmd = cxl_ppr_ctx->cxlmd;
+ struct cxl_dev_state *cxlds = cxlmd->cxlds;
+ struct cxl_memdev_state *mds = to_cxl_memdev_state(cxlds);
+ size_t rd_data_size = sizeof(struct cxl_memdev_ppr_rd_attrs);
+ size_t data_size;
+ struct cxl_memdev_ppr_rd_attrs *rd_attrs __free(kfree) =
+ kmalloc(rd_data_size, GFP_KERNEL);
+ if (!rd_attrs)
+ return -ENOMEM;
+
+ data_size = cxl_get_feature(mds, cxl_ppr_ctx->repair_uuid,
+ CXL_GET_FEAT_SEL_CURRENT_VALUE,
+ rd_attrs, rd_data_size);
+ if (!data_size)
+ return -EIO;
+
+ params->op_class = rd_attrs->hdr.op_class;
+ params->op_subclass = rd_attrs->hdr.op_subclass;
+ params->dpa_support = FIELD_GET(CXL_MEMDEV_PPR_FLAG_DPA_SUPPORT_MASK,
+ rd_attrs->ppr_flags);
+ params->media_accessible = FIELD_GET(CXL_MEMDEV_PPR_RESTRICTION_FLAG_MEDIA_ACCESSIBLE_MASK,
+ rd_attrs->restriction_flags) ^ 1;
+ params->data_retained = FIELD_GET(CXL_MEMDEV_PPR_RESTRICTION_FLAG_DATA_RETAINED_MASK,
+ rd_attrs->restriction_flags) ^ 1;
+
+ return 0;
+}
+
+static int cxl_mem_do_ppr_op(struct device *dev, void *drv_data,
+ struct cxl_memdev_ppr_params *rd_params,
+ enum cxl_ppr_param param_type)
+{
+ struct cxl_memdev_ppr_maintenance_attrs maintenance_attrs;
+ struct cxl_ppr_context *cxl_ppr_ctx = drv_data;
+ struct cxl_memdev *cxlmd = cxl_ppr_ctx->cxlmd;
+ struct cxl_dev_state *cxlds = cxlmd->cxlds;
+ struct cxl_memdev_state *mds = to_cxl_memdev_state(cxlds);
+ int ret;
+
+ if (!rd_params->media_accessible || !rd_params->data_retained) {
+ /* Check if DPA is mapped */
+ if (cxl_dpa_to_region(cxlmd, cxl_ppr_ctx->dpa)) {
+ dev_err(dev, "CXL can't do PPR as DPA is mapped\n");
+ return -EBUSY;
+ }
+ }
+ memset(&maintenance_attrs, 0, sizeof(maintenance_attrs));
+ if (param_type == CXL_PPR_PARAM_DO_QUERY)
+ maintenance_attrs.flags = CXL_MEMDEV_PPR_QUERY_RESOURCE_FLAG;
+ else
+ maintenance_attrs.flags = 0;
+ maintenance_attrs.dpa = cxl_ppr_ctx->dpa;
+ *((u32 *)&maintenance_attrs.nibble_mask[0]) = cxl_ppr_ctx->nibble_mask;
+ ret = cxl_do_maintenance(mds, rd_params->op_class, rd_params->op_subclass,
+ &maintenance_attrs, sizeof(maintenance_attrs));
+ if (ret) {
+ dev_err(dev, "CXL do PPR failed ret=%d\n", ret);
+ up_read(&cxl_region_rwsem);
+ cxl_ppr_ctx->nibble_mask = 0;
+ cxl_ppr_ctx->dpa = 0;
+ return ret;
+ }
+
+ return 0;
+}
+
+static int cxl_mem_ppr_set_attrs(struct device *dev, void *drv_data,
+ enum cxl_ppr_param param_type)
+{
+ struct cxl_memdev_ppr_params rd_params;
+ int ret;
+
+ ret = cxl_mem_ppr_get_attrs(dev, drv_data, &rd_params);
+ if (ret) {
+ dev_err(dev, "Get cxlmemdev PPR params failed ret=%d\n",
+ ret);
+ return ret;
+ }
+
+ switch (param_type) {
+ case CXL_PPR_PARAM_DO_QUERY:
+ case CXL_PPR_PARAM_DO_PPR:
+ ret = down_read_interruptible(&cxl_region_rwsem);
+ if (ret)
+ return ret;
+ ret = down_read_interruptible(&cxl_dpa_rwsem);
+ if (ret) {
+ up_read(&cxl_region_rwsem);
+ return ret;
+ }
+ ret = cxl_mem_do_ppr_op(dev, drv_data, &rd_params, param_type);
+ up_read(&cxl_dpa_rwsem);
+ up_read(&cxl_region_rwsem);
+ return ret;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int cxl_ppr_get_repair_type(struct device *dev, void *drv_data,
+ u32 *repair_type)
+{
+ struct cxl_ppr_context *cxl_ppr_ctx = drv_data;
+
+ *repair_type = cxl_ppr_ctx->repair_type;
+
+ return 0;
+}
+
+static int cxl_ppr_get_persist_mode_avail(struct device *dev, void *drv_data,
+ char *buf)
+{
+ return sysfs_emit(buf, "%u\n", EDAC_MEM_REPAIR_SOFT);
+}
+
+static int cxl_ppr_get_persist_mode(struct device *dev, void *drv_data,
+ u32 *persist_mode)
+{
+ struct cxl_ppr_context *cxl_ppr_ctx = drv_data;
+
+ *persist_mode = cxl_ppr_ctx->persist_mode;
+
+ return 0;
+}
+
+static int cxl_ppr_get_dpa_support(struct device *dev, void *drv_data,
+ u32 *dpa_support)
+{
+ struct cxl_memdev_ppr_params params;
+ int ret;
+
+ ret = cxl_mem_ppr_get_attrs(dev, drv_data, ¶ms);
+ if (ret)
+ return ret;
+
+ *dpa_support = params.dpa_support;
+
+ return 0;
+}
+
+static int cxl_get_ppr_safe_when_in_use(struct device *dev, void *drv_data,
+ u32 *safe)
+{
+ struct cxl_memdev_ppr_params params;
+ int ret;
+
+ ret = cxl_mem_ppr_get_attrs(dev, drv_data, ¶ms);
+ if (ret)
+ return ret;
+
+ *safe = params.media_accessible & params.data_retained;
+
+ return 0;
+}
+
+static int cxl_get_ppr_dpa(struct device *dev, void *drv_data,
+ u64 *dpa)
+{
+ struct cxl_ppr_context *cxl_ppr_ctx = drv_data;
+
+ *dpa = cxl_ppr_ctx->dpa;
+
+ return 0;
+}
+
+static int cxl_set_ppr_dpa(struct device *dev, void *drv_data, u64 dpa)
+{
+ struct cxl_ppr_context *cxl_ppr_ctx = drv_data;
+
+ if (!dpa)
+ return -EINVAL;
+
+ cxl_ppr_ctx->dpa = dpa;
+
+ return 0;
+}
+
+static int cxl_get_ppr_nibble_mask(struct device *dev, void *drv_data,
+ u64 *nibble_mask)
+{
+ struct cxl_ppr_context *cxl_ppr_ctx = drv_data;
+
+ *nibble_mask = cxl_ppr_ctx->nibble_mask;
+
+ return 0;
+}
+
+static int cxl_set_ppr_nibble_mask(struct device *dev, void *drv_data, u64 nibble_mask)
+{
+ struct cxl_ppr_context *cxl_ppr_ctx = drv_data;
+
+ cxl_ppr_ctx->nibble_mask = nibble_mask;
+
+ return 0;
+}
+
+static int cxl_do_query_ppr(struct device *dev, void *drv_data)
+{
+ struct cxl_ppr_context *cxl_ppr_ctx = drv_data;
+
+ if (!cxl_ppr_ctx->dpa)
+ return -EINVAL;
+
+ return cxl_mem_ppr_set_attrs(dev, drv_data, CXL_PPR_PARAM_DO_QUERY);
+}
+
+static int cxl_do_ppr(struct device *dev, void *drv_data)
+{
+ struct cxl_ppr_context *cxl_ppr_ctx = drv_data;
+ int ret;
+
+ if (!cxl_ppr_ctx->dpa)
+ return -EINVAL;
+
+ ret = cxl_mem_ppr_set_attrs(dev, drv_data, CXL_PPR_PARAM_DO_PPR);
+
+ return ret;
+}
+
+static const struct edac_mem_repair_ops cxl_sppr_ops = {
+ .get_repair_type = cxl_ppr_get_repair_type,
+ .get_persist_mode_avail = cxl_ppr_get_persist_mode_avail,
+ .get_persist_mode = cxl_ppr_get_persist_mode,
+ .get_dpa_support = cxl_ppr_get_dpa_support,
+ .get_repair_safe_when_in_use = cxl_get_ppr_safe_when_in_use,
+ .get_dpa = cxl_get_ppr_dpa,
+ .set_dpa = cxl_set_ppr_dpa,
+ .get_nibble_mask = cxl_get_ppr_nibble_mask,
+ .set_nibble_mask = cxl_set_ppr_nibble_mask,
+ .do_query = cxl_do_query_ppr,
+ .do_repair = cxl_do_ppr,
+};
+
int cxl_mem_ras_features_init(struct cxl_memdev *cxlmd, struct cxl_region *cxlr)
{
struct edac_dev_feature ras_features[CXL_DEV_NUM_RAS_FEATURES];
struct cxl_patrol_scrub_context *cxl_ps_ctx;
char cxl_dev_name[CXL_SCRUB_NAME_LEN];
+ struct cxl_ppr_context *cxl_sppr_ctx;
struct cxl_ecs_context *cxl_ecs_ctx;
struct cxl_feat_entry feat_entry;
struct cxl_memdev_state *mds;
struct cxl_dev_state *cxlds;
int num_ras_features = 0;
int num_media_frus;
+ u8 repair_inst = 0;
u8 scrub_inst = 0;
int rc, i;
@@ -737,6 +1068,39 @@ int cxl_mem_ras_features_init(struct cxl_memdev *cxlmd, struct cxl_region *cxlr)
}
feat_ecs_done:
+ /* CXL sPPR */
+ rc = cxl_get_supported_feature_entry(mds, &cxl_sppr_uuid,
+ &feat_entry);
+ if (rc < 0)
+ goto feat_sppr_done;
+
+ if (!(feat_entry.attr_flags & CXL_FEAT_ENTRY_FLAG_CHANGABLE))
+ goto feat_sppr_done;
+
+ cxl_sppr_ctx = devm_kzalloc(&cxlmd->dev, sizeof(*cxl_sppr_ctx),
+ GFP_KERNEL);
+ if (!cxl_sppr_ctx)
+ goto feat_sppr_done;
+ *cxl_sppr_ctx = (struct cxl_ppr_context) {
+ .repair_uuid = cxl_sppr_uuid,
+ .get_feat_size = feat_entry.get_feat_size,
+ .set_feat_size = feat_entry.set_feat_size,
+ .get_version = feat_entry.get_feat_ver,
+ .set_version = feat_entry.set_feat_ver,
+ .set_effects = feat_entry.set_effects,
+ .cxlmd = cxlmd,
+ .repair_type = EDAC_TYPE_SPPR,
+ .persist_mode = EDAC_MEM_REPAIR_SOFT,
+ .instance = repair_inst++,
+ };
+
+ ras_features[num_ras_features].ft_type = RAS_FEAT_MEM_REPAIR;
+ ras_features[num_ras_features].instance = cxl_sppr_ctx->instance;
+ ras_features[num_ras_features].mem_repair_ops = &cxl_sppr_ops;
+ ras_features[num_ras_features].ctx = cxl_sppr_ctx;
+ num_ras_features++;
+
+feat_sppr_done:
return edac_dev_register(&cxlmd->dev, cxl_dev_name, NULL,
num_ras_features, ras_features);
}
--
2.34.1
^ permalink raw reply [flat|nested] 30+ messages in thread
* [PATCH v14 14/14] cxl/memfeature: Add CXL memory device memory sparing control feature
2024-10-25 17:13 [PATCH v14 00/14] EDAC: Scrub: introduce generic EDAC RAS control feature driver + CXL/ACPI-RAS2 drivers shiju.jose
` (12 preceding siblings ...)
2024-10-25 17:13 ` [PATCH v14 13/14] cxl/memfeature: Add CXL memory device sPPR control feature shiju.jose
@ 2024-10-25 17:13 ` shiju.jose
2024-10-26 10:35 ` [PATCH v14 00/14] EDAC: Scrub: introduce generic EDAC RAS control feature driver + CXL/ACPI-RAS2 drivers Borislav Petkov
14 siblings, 0 replies; 30+ messages in thread
From: shiju.jose @ 2024-10-25 17:13 UTC (permalink / raw)
To: linux-edac, linux-cxl, linux-acpi, linux-mm, linux-kernel
Cc: bp, tony.luck, rafael, lenb, mchehab, dan.j.williams, dave,
jonathan.cameron, gregkh, sudeep.holla, jassisinghbrar,
dave.jiang, alison.schofield, vishal.l.verma, ira.weiny, david,
Vilas.Sridharan, leo.duran, Yazen.Ghannam, rientjes, jiaqiyan,
Jon.Grimm, dave.hansen, naoya.horiguchi, james.morse, jthoughton,
somasundaram.a, erdemaktas, pgonda, duenwen, gthelen, wschwartz,
dferguson, wbs, nifan.cxl, yazen.ghannam, tanxiaofei, prime.zeng,
roberto.sassu, kangkang.shen, wanghuiqiang, linuxarm, shiju.jose
From: Shiju Jose <shiju.jose@huawei.com>
Memory sparing is defined as a repair function that replaces a portion of
memory with a portion of functional memory at that same DPA. The subclasses
for this operation vary in terms of the scope of the sparing being
performed. The cacheline sparing subclass refers to a sparing action that
can replace a full cacheline. Row sparing is provided as an alternative to
PPR sparing functions and its scope is that of a single DDR row. Bank
sparing allows an entire bank to be replaced. Rank sparing is defined as
an operation in which an entire DDR rank is replaced.
Memory sparing maintenance operations may be supported by CXL devices
that implement CXL.mem protocol. A sparing maintenance operation requests
the CXL device to perform a repair operation on its media.
For example, a CXL device with DRAM components that support memory sparing
features may implement sparing maintenance operations.
The host may issue a query command by setting query resources flag in the
input payload (CXL spec 3.1 Table 8-105) to determine availability of
sparing resources for a given address. In response to a query request,
the device shall report the resource availability by producing the memory
sparing event record (CXL spec 3.1 Table 8-48) in which the Channel, Rank,
Nibble Mask, Bank Group, Bank, Row, Column, Sub-Channel fields are a copy
of the values specified in the request.
During the execution of a sparing maintenance operation, a CXL memory
device:
- May or may not retain data
- May or may not be able to process CXL.mem requests correctly.
These CXL memory device capabilities are specified by restriction flags
in the memory sparing feature readable attributes.
When a CXL device identifies a failure on a memory component, the device
may inform the host about the need for a memory sparing maintenance
operation by using an Event Record, where the maintenance needed flag may
set. The event record specifies some of the DPA, Channel, Rank, Nibble
Mask, Bank Group, Bank, Row, Column, Sub-Channel fields that should be
repaired. The userspace tool requests for maintenance operation if the
number of corrected error reported on a CXL.mem media exceeds error
threshold.
CXL spec 3.1 section 8.2.9.7.1.4 describes the device's memory sparing
maintenance operation feature.
CXL spec 3.1 section 8.2.9.7.2.3 describes the memory sparing feature
discovery and configuration.
Add support for controlling CXL memory device memory sparing feature.
Register with EDAC driver, which gets the memory repair attr descriptors
from the EDAC memory repair driver and exposes sysfs repair control
attributes for memory sparing to the userspace. For example CXL memory
sparing control for the CXL mem0 device is exposed in
/sys/bus/edac/devices/cxl_mem0/mem_repairX/
Use case
========
1. CXL device identifies a failure in a memory component, report to
userspace in a CXL generic/DRAM trace event.
2. Rasdaemon process the trace event and issue query request in sysfs to
check resources available for memory sparing if either of the following
conditions met.
- number of corrected error reported on a CXL.mem media exceeds error
threshold
- maintenance needed flag set in the event record.
3. CXL device shall report the resource availability by producing the
memory sparing event record in which the channel, rank, nibble mask, bank
Group, bank, row, column, sub-channel fields are a copy of the values
specified in the request. The query resource command shall return error
(invalid input) if the controller does not support reporting resource is
available.
4. Rasdaemon process the memory sparing trace event and issue repair
request for memory sparing.
Kernel CXL driver shall report memory sparing event record to the userspace
with the resource availability in order rasdaemon to process the event
record and issue a repair request in sysfs for the memory sparing operation
in the CXL device.
Tested for memory sparing control feature with
"hw/cxl: Add memory sparing control feature"
Repository: "https://gitlab.com/shiju.jose/qemu.git"
Branch: cxl-ras-features-2024-10-24
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
---
drivers/cxl/core/memfeature.c | 478 +++++++++++++++++++++++++++++++++-
1 file changed, 477 insertions(+), 1 deletion(-)
diff --git a/drivers/cxl/core/memfeature.c b/drivers/cxl/core/memfeature.c
index 00635e709c9d..d044518de3b6 100644
--- a/drivers/cxl/core/memfeature.c
+++ b/drivers/cxl/core/memfeature.c
@@ -20,7 +20,7 @@
#include <cxlmem.h>
#include "core.h"
-#define CXL_DEV_NUM_RAS_FEATURES 3
+#define CXL_DEV_NUM_RAS_FEATURES 7
#define CXL_DEV_HOUR_IN_SECS 3600
#define CXL_SCRUB_NAME_LEN 128
@@ -958,9 +958,447 @@ static const struct edac_mem_repair_ops cxl_sppr_ops = {
.do_repair = cxl_do_ppr,
};
+/* CXL memory sparing control definitions */
+/* See CXL rev 3.1 @8.2.9.7.2 Table 8-110 Maintenance Operation */
+#define CXL_CACHELINE_SPARING_UUID UUID_INIT(0x96C33386, 0x91dd, 0x44c7, 0x9e, 0xcb, \
+ 0xfd, 0xaf, 0x65, 0x03, 0xba, 0xc4)
+#define CXL_ROW_SPARING_UUID UUID_INIT(0x450ebf67, 0xb135, 0x4f97, 0xa4, 0x98, \
+ 0xc2, 0xd5, 0x7f, 0x27, 0x9b, 0xed)
+#define CXL_BANK_SPARING_UUID UUID_INIT(0x78b79636, 0x90ac, 0x4b64, 0xa4, 0xef, \
+ 0xfa, 0xac, 0x5d, 0x18, 0xa8, 0x63)
+#define CXL_RANK_SPARING_UUID UUID_INIT(0x34dbaff5, 0x0552, 0x4281, 0x8f, 0x76, \
+ 0xda, 0x0b, 0x5e, 0x7a, 0x76, 0xa7)
+
+enum cxl_mem_sparing_granularity {
+ CXL_MEM_SPARING_CACHELINE,
+ CXL_MEM_SPARING_ROW,
+ CXL_MEM_SPARING_BANK,
+ CXL_MEM_SPARING_RANK,
+ CXL_MEM_SPARING_MAX
+};
+
+struct cxl_mem_sparing_context {
+ uuid_t repair_uuid;
+ u8 instance;
+ u16 get_feat_size;
+ u16 set_feat_size;
+ u8 get_version;
+ u8 set_version;
+ u16 set_effects;
+ struct cxl_memdev *cxlmd;
+ enum edac_mem_repair_type repair_type;
+ enum edac_mem_repair_persist_mode persist_mode;
+ enum cxl_mem_sparing_granularity granularity;
+ bool dpa_support;
+ u64 dpa;
+ u8 channel;
+ u8 rank;
+ u32 nibble_mask;
+ u8 bank_group;
+ u8 bank;
+ u32 row;
+ u16 column;
+ u8 sub_channel;
+};
+
+struct cxl_memdev_sparing_params {
+ u8 op_class;
+ u8 op_subclass;
+ bool cap_safe_when_in_use;
+ bool cap_hard_sparing;
+ bool cap_soft_sparing;
+};
+
+enum cxl_mem_sparing_param_type {
+ CXL_MEM_SPARING_PARAM_DO_QUERY,
+ CXL_MEM_SPARING_PARAM_DO_REPAIR,
+};
+
+#define CXL_MEMDEV_SPARING_RD_CAP_SAFE_IN_USE_MASK BIT(0)
+#define CXL_MEMDEV_SPARING_RD_CAP_HARD_SPARING_MASK BIT(1)
+#define CXL_MEMDEV_SPARING_RD_CAP_SOFT_SPARING_MASK BIT(2)
+
+#define CXL_MEMDEV_SPARING_WR_DEVICE_INITIATED_MASK BIT(0)
+
+#define CXL_MEMDEV_SPARING_QUERY_RESOURCE_FLAG BIT(0)
+#define CXL_MEMDEV_SET_HARD_SPARING_FLAG BIT(1)
+#define CXL_MEMDEV_SPARING_SUB_CHANNEL_VALID_FLAG BIT(2)
+#define CXL_MEMDEV_SPARING_NIB_MASK_VALID_FLAG BIT(3)
+
+/* See CXL rev 3.1 @8.2.9.7.2.3 Table 8-119 Memory Sparing Feature Readable Attributes */
+struct cxl_memdev_sparing_rd_attrs {
+ struct cxl_memdev_repair_rd_attrs_hdr hdr;
+ u8 rsvd;
+ __le16 restriction_flags;
+} __packed;
+
+/* See CXL rev 3.1 @8.2.9.7.2.3 Table 8-120 Memory Sparing Feature Writable Attributes */
+struct cxl_memdev_sparing_wr_attrs {
+ __le16 op_mode;
+} __packed;
+
+/* See CXL rev 3.1 @8.2.9.7.1.4 Table 8-105 Memory Sparing Input Payload */
+struct cxl_memdev_sparing_in_payload {
+ u8 flags;
+ u8 channel;
+ u8 rank;
+ u8 nibble_mask[3];
+ u8 bank_group;
+ u8 bank;
+ u8 row[3];
+ u16 column;
+ u8 sub_channel;
+} __packed;
+
+static int cxl_mem_sparing_get_attrs(struct device *dev, void *drv_data,
+ struct cxl_memdev_sparing_params *params)
+{
+ struct cxl_mem_sparing_context *cxl_sparing_ctx = drv_data;
+ struct cxl_memdev *cxlmd = cxl_sparing_ctx->cxlmd;
+ struct cxl_dev_state *cxlds = cxlmd->cxlds;
+ struct cxl_memdev_state *mds = to_cxl_memdev_state(cxlds);
+ size_t rd_data_size = sizeof(struct cxl_memdev_sparing_rd_attrs);
+ size_t data_size;
+ struct cxl_memdev_sparing_rd_attrs *rd_attrs __free(kfree) =
+ kmalloc(rd_data_size, GFP_KERNEL);
+ if (!rd_attrs)
+ return -ENOMEM;
+
+ data_size = cxl_get_feature(mds, cxl_sparing_ctx->repair_uuid,
+ CXL_GET_FEAT_SEL_CURRENT_VALUE,
+ rd_attrs, rd_data_size);
+ if (!data_size)
+ return -EIO;
+
+ params->op_class = rd_attrs->hdr.op_class;
+ params->op_subclass = rd_attrs->hdr.op_subclass;
+ params->cap_safe_when_in_use = FIELD_GET(CXL_MEMDEV_SPARING_RD_CAP_SAFE_IN_USE_MASK,
+ rd_attrs->restriction_flags) ^ 1;
+ params->cap_hard_sparing = FIELD_GET(CXL_MEMDEV_SPARING_RD_CAP_HARD_SPARING_MASK,
+ rd_attrs->restriction_flags);
+ params->cap_soft_sparing = FIELD_GET(CXL_MEMDEV_SPARING_RD_CAP_SOFT_SPARING_MASK,
+ rd_attrs->restriction_flags);
+
+ return 0;
+}
+
+static int cxl_mem_do_sparing_op(struct device *dev, void *drv_data,
+ struct cxl_memdev_sparing_params *rd_params,
+ enum cxl_mem_sparing_param_type param_type)
+{
+ struct cxl_memdev_sparing_in_payload sparing_pi;
+ struct cxl_mem_sparing_context *cxl_sparing_ctx = drv_data;
+ struct cxl_memdev *cxlmd = cxl_sparing_ctx->cxlmd;
+ struct cxl_dev_state *cxlds = cxlmd->cxlds;
+ struct cxl_memdev_state *mds = to_cxl_memdev_state(cxlds);
+ int ret;
+
+ if (!rd_params->cap_safe_when_in_use && cxl_sparing_ctx->dpa) {
+ /* Check if DPA is mapped */
+ if (cxl_dpa_to_region(cxlmd, cxl_sparing_ctx->dpa)) {
+ dev_err(dev, "CXL can't do sparing as DPA is mapped\n");
+ return -EBUSY;
+ }
+ }
+ memset(&sparing_pi, 0, sizeof(sparing_pi));
+ if (param_type == CXL_MEM_SPARING_PARAM_DO_QUERY) {
+ sparing_pi.flags = CXL_MEMDEV_SPARING_QUERY_RESOURCE_FLAG;
+ } else {
+ sparing_pi.flags =
+ FIELD_PREP(CXL_MEMDEV_SPARING_QUERY_RESOURCE_FLAG, 0);
+ /* Do need set hard sparing, sub-channel & nb mask flags for query? */
+ if (cxl_sparing_ctx->persist_mode == EDAC_MEM_REPAIR_HARD)
+ sparing_pi.flags |=
+ FIELD_PREP(CXL_MEMDEV_SET_HARD_SPARING_FLAG, 1);
+ if (cxl_sparing_ctx->sub_channel)
+ sparing_pi.flags |=
+ FIELD_PREP(CXL_MEMDEV_SPARING_SUB_CHANNEL_VALID_FLAG, 1);
+ if (cxl_sparing_ctx->nibble_mask)
+ sparing_pi.flags |=
+ FIELD_PREP(CXL_MEMDEV_SPARING_NIB_MASK_VALID_FLAG, 1);
+ }
+ /* Common atts for all memory sparing types */
+ sparing_pi.channel = cxl_sparing_ctx->channel;
+ sparing_pi.rank = cxl_sparing_ctx->rank;
+ *((u32 *)&sparing_pi.nibble_mask[0]) = cxl_sparing_ctx->nibble_mask;
+
+ if (cxl_sparing_ctx->repair_type == EDAC_TYPE_CACHELINE_MEM_SPARING ||
+ cxl_sparing_ctx->repair_type == EDAC_TYPE_ROW_MEM_SPARING ||
+ cxl_sparing_ctx->repair_type == EDAC_TYPE_BANK_MEM_SPARING) {
+ sparing_pi.bank_group = cxl_sparing_ctx->bank_group;
+ sparing_pi.bank = cxl_sparing_ctx->bank;
+ }
+ if (cxl_sparing_ctx->repair_type == EDAC_TYPE_CACHELINE_MEM_SPARING ||
+ cxl_sparing_ctx->repair_type == EDAC_TYPE_ROW_MEM_SPARING)
+ *((u32 *)&sparing_pi.row[0]) = cxl_sparing_ctx->row;
+ if (cxl_sparing_ctx->repair_type == EDAC_TYPE_CACHELINE_MEM_SPARING) {
+ sparing_pi.column = cxl_sparing_ctx->column;
+ sparing_pi.sub_channel = cxl_sparing_ctx->sub_channel;
+ }
+
+ ret = cxl_do_maintenance(mds, rd_params->op_class, rd_params->op_subclass,
+ &sparing_pi, sizeof(sparing_pi));
+ if (ret) {
+ dev_err(dev, "CXL do mem sparing failed ret=%d\n", ret);
+ cxl_sparing_ctx->dpa = 0;
+ cxl_sparing_ctx->nibble_mask = 0;
+ cxl_sparing_ctx->bank_group = 0;
+ cxl_sparing_ctx->bank = 0;
+ cxl_sparing_ctx->rank = 0;
+ cxl_sparing_ctx->row = 0;
+ cxl_sparing_ctx->column = 0;
+ cxl_sparing_ctx->channel = 0;
+ cxl_sparing_ctx->sub_channel = 0;
+ return ret;
+ }
+
+ return 0;
+}
+
+static int cxl_mem_sparing_set_attrs(struct device *dev, void *drv_data,
+ enum cxl_mem_sparing_param_type param_type)
+{
+ struct cxl_memdev_sparing_params rd_params;
+ int ret;
+
+ ret = cxl_mem_sparing_get_attrs(dev, drv_data, &rd_params);
+ if (ret) {
+ dev_err(dev, "Get cxlmemdev sparing params failed ret=%d\n",
+ ret);
+ return ret;
+ }
+
+ switch (param_type) {
+ case CXL_MEM_SPARING_PARAM_DO_QUERY:
+ case CXL_MEM_SPARING_PARAM_DO_REPAIR:
+ ret = down_read_interruptible(&cxl_region_rwsem);
+ if (ret)
+ return ret;
+ ret = down_read_interruptible(&cxl_dpa_rwsem);
+ if (ret) {
+ up_read(&cxl_region_rwsem);
+ return ret;
+ }
+ ret = cxl_mem_do_sparing_op(dev, drv_data, &rd_params, param_type);
+ up_read(&cxl_dpa_rwsem);
+ up_read(&cxl_region_rwsem);
+ return ret;
+ default:
+ return -EINVAL;
+ }
+}
+
+#define CXL_SPARING_GET_ATTR(attrib, data_type) \
+static int cxl_mem_sparing_get_##attrib(struct device *dev, void *drv_data, \
+ data_type *val) \
+{ \
+ struct cxl_mem_sparing_context *ctx = drv_data; \
+ \
+ *val = ctx->attrib; \
+ \
+ return 0; \
+}
+CXL_SPARING_GET_ATTR(repair_type, u32)
+CXL_SPARING_GET_ATTR(persist_mode, u32)
+CXL_SPARING_GET_ATTR(dpa_support, u32)
+CXL_SPARING_GET_ATTR(dpa, u64)
+CXL_SPARING_GET_ATTR(nibble_mask, u64)
+CXL_SPARING_GET_ATTR(bank_group, u32)
+CXL_SPARING_GET_ATTR(bank, u32)
+CXL_SPARING_GET_ATTR(rank, u32)
+CXL_SPARING_GET_ATTR(row, u64)
+CXL_SPARING_GET_ATTR(column, u32)
+CXL_SPARING_GET_ATTR(channel, u32)
+CXL_SPARING_GET_ATTR(sub_channel, u32)
+
+#define CXL_SPARING_SET_ATTR(attrib, data_type) \
+static int cxl_mem_sparing_set_##attrib(struct device *dev, void *drv_data, \
+ data_type val) \
+{ \
+ struct cxl_mem_sparing_context *ctx = drv_data; \
+ \
+ ctx->attrib = val; \
+ \
+ return 0; \
+}
+CXL_SPARING_SET_ATTR(nibble_mask, u64)
+CXL_SPARING_SET_ATTR(bank_group, u32)
+CXL_SPARING_SET_ATTR(bank, u32)
+CXL_SPARING_SET_ATTR(rank, u32)
+CXL_SPARING_SET_ATTR(row, u64)
+CXL_SPARING_SET_ATTR(column, u32)
+CXL_SPARING_SET_ATTR(channel, u32)
+CXL_SPARING_SET_ATTR(sub_channel, u32)
+
+static int cxl_mem_sparing_get_persist_mode_avail(struct device *dev, void *drv_data,
+ char *buf)
+{
+struct cxl_memdev_sparing_params params;
+ int ret;
+
+ ret = cxl_mem_sparing_get_attrs(dev, drv_data, ¶ms);
+ if (ret)
+ return ret;
+
+ if (params.cap_soft_sparing && params.cap_hard_sparing)
+ return sysfs_emit(buf, "%u,%u\n", EDAC_MEM_REPAIR_SOFT, EDAC_MEM_REPAIR_HARD);
+ else if (params.cap_soft_sparing)
+ return sysfs_emit(buf, "%u\n", EDAC_MEM_REPAIR_SOFT);
+ else if (params.cap_hard_sparing)
+ return sysfs_emit(buf, "%u\n", EDAC_MEM_REPAIR_HARD);
+ else
+ return sysfs_emit(buf, "Not Supported\n");
+}
+
+static int cxl_mem_sparing_set_persist_mode(struct device *dev, void *drv_data, u32 persist_mode)
+{
+ struct cxl_mem_sparing_context *ctx = drv_data;
+
+ switch (persist_mode) {
+ case EDAC_MEM_REPAIR_SOFT:
+ ctx->persist_mode = EDAC_MEM_REPAIR_SOFT;
+ return 0;
+ case EDAC_MEM_REPAIR_HARD:
+ ctx->persist_mode = EDAC_MEM_REPAIR_HARD;
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int cxl_get_mem_sparing_safe_when_in_use(struct device *dev, void *drv_data,
+ u32 *safe)
+{
+ struct cxl_memdev_sparing_params params;
+ int ret;
+
+ ret = cxl_mem_sparing_get_attrs(dev, drv_data, ¶ms);
+ if (ret)
+ return ret;
+
+ *safe = params.cap_safe_when_in_use;
+
+ return 0;
+}
+
+static int cxl_mem_sparing_set_dpa(struct device *dev, void *drv_data, u64 dpa)
+{
+ struct cxl_mem_sparing_context *ctx = drv_data;
+
+ if (!dpa)
+ return -EINVAL;
+
+ ctx->dpa = dpa;
+
+ return 0;
+}
+
+static int cxl_do_query_mem_sparing(struct device *dev, void *drv_data)
+{
+ return cxl_mem_sparing_set_attrs(dev, drv_data, CXL_MEM_SPARING_PARAM_DO_QUERY);
+}
+
+static int cxl_do_mem_sparing(struct device *dev, void *drv_data)
+{
+ return cxl_mem_sparing_set_attrs(dev, drv_data, CXL_MEM_SPARING_PARAM_DO_REPAIR);
+}
+
+#define RANK_OPS \
+ .get_repair_type = cxl_mem_sparing_get_repair_type, \
+ .get_persist_mode_avail = cxl_mem_sparing_get_persist_mode_avail, \
+ .get_persist_mode = cxl_mem_sparing_get_persist_mode, \
+ .set_persist_mode = cxl_mem_sparing_set_persist_mode, \
+ .get_repair_safe_when_in_use = cxl_get_mem_sparing_safe_when_in_use, \
+ .get_dpa_support = cxl_mem_sparing_get_dpa_support, \
+ .get_dpa = cxl_mem_sparing_get_dpa, \
+ .set_dpa = cxl_mem_sparing_set_dpa, \
+ .get_nibble_mask = cxl_mem_sparing_get_nibble_mask, \
+ .set_nibble_mask = cxl_mem_sparing_set_nibble_mask, \
+ .get_rank = cxl_mem_sparing_get_rank, \
+ .set_rank = cxl_mem_sparing_set_rank, \
+ .get_channel = cxl_mem_sparing_get_channel, \
+ .set_channel = cxl_mem_sparing_set_channel, \
+ .do_query = cxl_do_query_mem_sparing, \
+ .do_repair = cxl_do_mem_sparing
+
+#define BANK_OPS \
+ RANK_OPS, \
+ .get_bank_group = cxl_mem_sparing_get_bank_group, \
+ .set_bank_group = cxl_mem_sparing_set_bank_group, \
+ .get_bank = cxl_mem_sparing_get_bank, \
+ .set_bank = cxl_mem_sparing_set_bank
+
+#define ROW_OPS \
+ BANK_OPS, \
+ .get_row = cxl_mem_sparing_get_row, \
+ .set_row = cxl_mem_sparing_set_row
+
+#define CACHELINE_OPS \
+ ROW_OPS, \
+ .get_column = cxl_mem_sparing_get_column, \
+ .set_column = cxl_mem_sparing_set_column, \
+ .get_sub_channel = cxl_mem_sparing_get_sub_channel, \
+ .set_sub_channel = cxl_mem_sparing_set_sub_channel
+
+static const struct edac_mem_repair_ops cxl_rank_sparing_ops = {
+ RANK_OPS,
+};
+
+static const struct edac_mem_repair_ops cxl_bank_sparing_ops = {
+ BANK_OPS,
+};
+
+static const struct edac_mem_repair_ops cxl_row_sparing_ops = {
+ ROW_OPS,
+};
+
+static const struct edac_mem_repair_ops cxl_cacheline_sparing_ops = {
+ CACHELINE_OPS,
+};
+
+struct cxl_mem_sparing_desc {
+ const uuid_t repair_uuid;
+ enum edac_mem_repair_type repair_type;
+ enum edac_mem_repair_persist_mode persist_mode;
+ enum cxl_mem_sparing_granularity granularity;
+ const struct edac_mem_repair_ops *repair_ops;
+};
+
+static const struct cxl_mem_sparing_desc mem_sparing_desc[] = {
+ {
+ .repair_uuid = CXL_CACHELINE_SPARING_UUID,
+ .repair_type = EDAC_TYPE_CACHELINE_MEM_SPARING,
+ .persist_mode = EDAC_MEM_REPAIR_SOFT,
+ .granularity = CXL_MEM_SPARING_CACHELINE,
+ .repair_ops = &cxl_cacheline_sparing_ops,
+ },
+ {
+ .repair_uuid = CXL_ROW_SPARING_UUID,
+ .repair_type = EDAC_TYPE_ROW_MEM_SPARING,
+ .persist_mode = EDAC_MEM_REPAIR_SOFT,
+ .granularity = CXL_MEM_SPARING_ROW,
+ .repair_ops = &cxl_row_sparing_ops,
+ },
+ {
+ .repair_uuid = CXL_BANK_SPARING_UUID,
+ .repair_type = EDAC_TYPE_BANK_MEM_SPARING,
+ .persist_mode = EDAC_MEM_REPAIR_SOFT,
+ .granularity = CXL_MEM_SPARING_BANK,
+ .repair_ops = &cxl_bank_sparing_ops,
+ },
+ {
+ .repair_uuid = CXL_RANK_SPARING_UUID,
+ .repair_type = EDAC_TYPE_RANK_MEM_SPARING,
+ .persist_mode = EDAC_MEM_REPAIR_SOFT,
+ .granularity = CXL_MEM_SPARING_RANK,
+ .repair_ops = &cxl_rank_sparing_ops,
+ },
+};
+
int cxl_mem_ras_features_init(struct cxl_memdev *cxlmd, struct cxl_region *cxlr)
{
struct edac_dev_feature ras_features[CXL_DEV_NUM_RAS_FEATURES];
+ struct cxl_mem_sparing_context *cxl_sparing_ctx;
struct cxl_patrol_scrub_context *cxl_ps_ctx;
char cxl_dev_name[CXL_SCRUB_NAME_LEN];
struct cxl_ppr_context *cxl_sppr_ctx;
@@ -1101,6 +1539,44 @@ int cxl_mem_ras_features_init(struct cxl_memdev *cxlmd, struct cxl_region *cxlr)
num_ras_features++;
feat_sppr_done:
+ /* CXL memory sparing */
+ for (i = 0; i < CXL_MEM_SPARING_MAX; i++) {
+ rc = cxl_get_supported_feature_entry(mds, &mem_sparing_desc[i].repair_uuid,
+ &feat_entry);
+ if (rc < 0)
+ continue;
+
+ if (!(feat_entry.attr_flags & CXL_FEAT_ENTRY_FLAG_CHANGABLE))
+ continue;
+
+ cxl_sparing_ctx = devm_kzalloc(&cxlmd->dev, sizeof(*cxl_sparing_ctx),
+ GFP_KERNEL);
+ if (!cxl_sparing_ctx)
+ goto feat_sparing_done;
+
+ *cxl_sparing_ctx = (struct cxl_mem_sparing_context) {
+ .repair_uuid = mem_sparing_desc[i].repair_uuid,
+ .get_feat_size = feat_entry.get_feat_size,
+ .set_feat_size = feat_entry.set_feat_size,
+ .get_version = feat_entry.get_feat_ver,
+ .set_version = feat_entry.set_feat_ver,
+ .set_effects = feat_entry.set_effects,
+ .cxlmd = cxlmd,
+ .repair_type = mem_sparing_desc[i].repair_type,
+ .persist_mode = mem_sparing_desc[i].persist_mode,
+ .granularity = mem_sparing_desc[i].granularity,
+ .dpa_support = true,
+ .instance = repair_inst++,
+ };
+ ras_features[num_ras_features].ft_type = RAS_FEAT_MEM_REPAIR;
+ ras_features[num_ras_features].instance = cxl_sparing_ctx->instance;
+ ras_features[num_ras_features].mem_repair_ops =
+ mem_sparing_desc[i].repair_ops;
+ ras_features[num_ras_features].ctx = cxl_sparing_ctx;
+ num_ras_features++;
+ }
+
+feat_sparing_done:
return edac_dev_register(&cxlmd->dev, cxl_dev_name, NULL,
num_ras_features, ras_features);
}
--
2.34.1
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH v14 00/14] EDAC: Scrub: introduce generic EDAC RAS control feature driver + CXL/ACPI-RAS2 drivers
2024-10-25 17:13 [PATCH v14 00/14] EDAC: Scrub: introduce generic EDAC RAS control feature driver + CXL/ACPI-RAS2 drivers shiju.jose
` (13 preceding siblings ...)
2024-10-25 17:13 ` [PATCH v14 14/14] cxl/memfeature: Add CXL memory device memory sparing " shiju.jose
@ 2024-10-26 10:35 ` Borislav Petkov
14 siblings, 0 replies; 30+ messages in thread
From: Borislav Petkov @ 2024-10-26 10:35 UTC (permalink / raw)
To: shiju.jose
Cc: linux-edac, linux-cxl, linux-acpi, linux-mm, linux-kernel,
tony.luck, rafael, lenb, mchehab, dan.j.williams, dave,
jonathan.cameron, gregkh, sudeep.holla, jassisinghbrar,
dave.jiang, alison.schofield, vishal.l.verma, ira.weiny, david,
Vilas.Sridharan, leo.duran, Yazen.Ghannam, rientjes, jiaqiyan,
Jon.Grimm, dave.hansen, naoya.horiguchi, james.morse, jthoughton,
somasundaram.a, erdemaktas, pgonda, duenwen, gthelen, wschwartz,
dferguson, wbs, nifan.cxl, tanxiaofei, prime.zeng, roberto.sassu,
kangkang.shen, wanghuiqiang, linuxarm
On Fri, Oct 25, 2024 at 06:13:41PM +0100, shiju.jose@huawei.com wrote:
> From: Shiju Jose <shiju.jose@huawei.com>
>
> Previously known as "ras: scrub: introduce subsystem + CXL/ACPI-RAS2 drivers".
>
> Augmenting EDAC for controlling RAS features
> ============================================
> The proposed expansion of EDAC for controlling RAS features and
> exposing features control attributes to userspace in sysfs.
> Some Examples:
> - Scrub control
> - Error Check Scrub (ECS) control
> - ACPI RAS2 features
> - Post Package Repair (PPR) control
> - Memory Sparing Repair control etc.
The non-patchset handling information, i.e., the documentation of the feature
and those nice graphics in this 0th mail should go into
Documentation/edac/scrub.rst
(yeah, no "edac-" prefix to the filename) for future reference.
Thx.
--
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH v14 03/14] EDAC: Add ECS control feature
2024-10-25 17:13 ` [PATCH v14 03/14] EDAC: Add ECS " shiju.jose
@ 2024-10-28 11:16 ` Borislav Petkov
2024-10-28 16:03 ` Shiju Jose
0 siblings, 1 reply; 30+ messages in thread
From: Borislav Petkov @ 2024-10-28 11:16 UTC (permalink / raw)
To: shiju.jose
Cc: linux-edac, linux-cxl, linux-acpi, linux-mm, linux-kernel,
tony.luck, rafael, lenb, mchehab, dan.j.williams, dave,
jonathan.cameron, gregkh, sudeep.holla, jassisinghbrar,
dave.jiang, alison.schofield, vishal.l.verma, ira.weiny, david,
Vilas.Sridharan, leo.duran, Yazen.Ghannam, rientjes, jiaqiyan,
Jon.Grimm, dave.hansen, naoya.horiguchi, james.morse, jthoughton,
somasundaram.a, erdemaktas, pgonda, duenwen, gthelen, wschwartz,
dferguson, wbs, nifan.cxl, tanxiaofei, prime.zeng, roberto.sassu,
kangkang.shen, wanghuiqiang, linuxarm
On Fri, Oct 25, 2024 at 06:13:44PM +0100, shiju.jose@huawei.com wrote:
> +What: /sys/bus/edac/devices/<dev-name>/ecs_fruX/log_entry_type
> +Date: Jan 2025
> +KernelVersion: 6.13
> +Contact: linux-edac@vger.kernel.org
> +Description:
> + (RW) The log entry type of how the DDR5 ECS log is reported.
> + 00b - per DRAM.
> + 01b - per memory media FRU.
If the conversion function here is kstrtoul(), why are those values not "0"
and "1" but in binary format?
> +
> +What: /sys/bus/edac/devices/<dev-name>/ecs_fruX/log_entry_type_per_dram
> +Date: Jan 2025
> +KernelVersion: 6.13
> +Contact: linux-edac@vger.kernel.org
> +Description:
> + (RO) True if current log entry type is per DRAM.
> +
> +What: /sys/bus/edac/devices/<dev-name>/ecs_fruX/log_entry_type_per_memory_media
> +Date: Jan 2025
> +KernelVersion: 6.13
> +Contact: linux-edac@vger.kernel.org
> +Description:
> + (RO) True if current log entry type is per memory media FRU.
What's the point of those two if log_entry_type already gives you the same
info?
And the filename length is a bit too much...
> +
> +What: /sys/bus/edac/devices/<dev-name>/ecs_fruX/mode
> +Date: Jan 2025
> +KernelVersion: 6.13
> +Contact: linux-edac@vger.kernel.org
> +Description:
> + (RW) The mode of how the DDR5 ECS counts the errors.
> + 0 - ECS counts rows with errors.
> + 1 - ECS counts codewords with errors.
Now we have "0" and "1"s. Oh well.
What are "rows", what are "codewords"? Explain them here pls for the user.
> +What: /sys/bus/edac/devices/<dev-name>/ecs_fruX/mode_counts_rows
> +Date: Jan 2025
> +KernelVersion: 6.13
> +Contact: linux-edac@vger.kernel.org
> +Description:
> + (RO) True if current mode is ECS counts rows with errors.
> +
> +What: /sys/bus/edac/devices/<dev-name>/ecs_fruX/mode_counts_codewords
> +Date: Jan 2025
> +KernelVersion: 6.13
> +Contact: linux-edac@vger.kernel.org
> +Description:
> + (RO) True if current mode is ECS counts codewords with errors.
Same question as above - redundant files.
> +What: /sys/bus/edac/devices/<dev-name>/ecs_fruX/reset
> +Date: Jan 2025
> +KernelVersion: 6.13
> +Contact: linux-edac@vger.kernel.org
> +Description:
> + (WO) ECS reset ECC counter.
> + 1 - reset ECC counter to the default value.
1 or any value?
Looks like any to me...
You should restrict it to "1" in case you want to extend this interface with
"2" in the future, for example, doing something a bit different.
> +
> +What: /sys/bus/edac/devices/<dev-name>/ecs_fruX/threshold
> +Date: Jan 2025
> +KernelVersion: 6.13
> +Contact: linux-edac@vger.kernel.org
> +Description:
> + (RW) ECS threshold count per gigabits of memory cells.
That definitely needs more explanation.
> diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
> index 188501e676c7..b24c2c112d9c 100644
> --- a/drivers/edac/Makefile
> +++ b/drivers/edac/Makefile
> @@ -10,7 +10,7 @@ obj-$(CONFIG_EDAC) := edac_core.o
>
> edac_core-y := edac_mc.o edac_device.o edac_mc_sysfs.o
> edac_core-y += edac_module.o edac_device_sysfs.o wq.o
> -edac_core-y += scrub.o
> +edac_core-y += scrub.o ecs.o
>
> edac_core-$(CONFIG_EDAC_DEBUG) += debugfs.o
>
> diff --git a/drivers/edac/ecs.c b/drivers/edac/ecs.c
> new file mode 100755
> index 000000000000..a2b64d7bf6b6
> --- /dev/null
> +++ b/drivers/edac/ecs.c
> @@ -0,0 +1,240 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Generic ECS driver in order to support control the on die
> + * error check scrub (e.g. DDR5 ECS).
This sentence needs grammar check.
> The common sysfs ECS
> + * interface abstracts the control of an arbitrary ECS
> + * functionality to a common set of functions.
> + *
> + * Copyright (c) 2024 HiSilicon Limited.
> + */
> +
#undef pr_fmt
> +#define pr_fmt(fmt) "EDAC ECS: " fmt
Grep the tree for examples how to do that properly.
Also, this pr_fmt looks unused.
> +static umode_t ecs_attr_visible(struct kobject *kobj, struct attribute *a, int attr_id)
> +{
> + struct device *ras_feat_dev = kobj_to_dev(kobj);
> + struct edac_dev_feat_ctx *ctx = dev_get_drvdata(ras_feat_dev);
> + const struct edac_ecs_ops *ops = ctx->ecs.ecs_ops;
> +
> + switch (attr_id) {
> + case ECS_LOG_ENTRY_TYPE:
> + if (ops->get_log_entry_type) {
> + if (ops->set_log_entry_type)
> + return a->mode;
> + else
> + return 0444;
What is the goal for the access mode of all those sysfs entries? I sure hope
it is going to be root-only no-matter what. I don't want normal users to cause
scrub activity. Please make sure your whole set does that.
> + }
> + break;
> + case ECS_LOG_ENTRY_TYPE_PER_DRAM:
> + if (ops->get_log_entry_type_per_dram)
> + return a->mode;
> + break;
> + case ECS_LOG_ENTRY_TYPE_PER_MEMORY_MEDIA:
> + if (ops->get_log_entry_type_per_memory_media)
> + return a->mode;
> + break;
> + case ECS_MODE:
> + if (ops->get_mode) {
> + if (ops->set_mode)
> + return a->mode;
> + else
> + return 0444;
> + }
> + break;
> + case ECS_MODE_COUNTS_ROWS:
> + if (ops->get_mode_counts_rows)
> + return a->mode;
> + break;
> + case ECS_MODE_COUNTS_CODEWORDS:
> + if (ops->get_mode_counts_codewords)
> + return a->mode;
> + break;
> + case ECS_RESET:
> + if (ops->reset)
> + return a->mode;
> + break;
> + case ECS_THRESHOLD:
> + if (ops->get_threshold) {
> + if (ops->set_threshold)
> + return a->mode;
> + else
> + return 0444;
> + }
> + break;
> + default:
> + break;
> + }
> +
> + return 0;
> +}
> +
> +#define EDAC_ECS_ATTR_RO(_name, _fru_id) \
> + ((struct edac_ecs_dev_attr) { .dev_attr = __ATTR_RO(_name), \
> + .fru_id = _fru_id })
> +
> +#define EDAC_ECS_ATTR_WO(_name, _fru_id) \
> + ((struct edac_ecs_dev_attr) { .dev_attr = __ATTR_WO(_name), \
> + .fru_id = _fru_id })
> +
> +#define EDAC_ECS_ATTR_RW(_name, _fru_id) \
> + ((struct edac_ecs_dev_attr) { .dev_attr = __ATTR_RW(_name), \
> + .fru_id = _fru_id })
> +
> +static int ecs_create_desc(struct device *ecs_dev,
> + const struct attribute_group **attr_groups, u16 num_media_frus)
> +{
> + struct edac_ecs_context *ecs_ctx;
> + u32 fru;
> +
> + ecs_ctx = devm_kzalloc(ecs_dev, sizeof(*ecs_ctx), GFP_KERNEL);
> + if (!ecs_ctx)
> + return -ENOMEM;
> +
> + ecs_ctx->num_media_frus = num_media_frus;
> + ecs_ctx->fru_ctxs = devm_kcalloc(ecs_dev, num_media_frus,
> + sizeof(*ecs_ctx->fru_ctxs),
> + GFP_KERNEL);
> + if (!ecs_ctx->fru_ctxs)
> + return -ENOMEM;
> +
> + for (fru = 0; fru < num_media_frus; fru++) {
> + struct edac_ecs_fru_context *fru_ctx = &ecs_ctx->fru_ctxs[fru];
> + struct attribute_group *group = &fru_ctx->group;
> + int i;
> +
> + fru_ctx->ecs_dev_attr[ECS_LOG_ENTRY_TYPE] = EDAC_ECS_ATTR_RW(log_entry_type, fru);
> + fru_ctx->ecs_dev_attr[ECS_LOG_ENTRY_TYPE_PER_DRAM] =
> + EDAC_ECS_ATTR_RO(log_entry_type_per_dram, fru);
> + fru_ctx->ecs_dev_attr[ECS_LOG_ENTRY_TYPE_PER_MEMORY_MEDIA] =
> + EDAC_ECS_ATTR_RO(log_entry_type_per_memory_media, fru);
> + fru_ctx->ecs_dev_attr[ECS_MODE] = EDAC_ECS_ATTR_RW(mode, fru);
> + fru_ctx->ecs_dev_attr[ECS_MODE_COUNTS_ROWS] =
> + EDAC_ECS_ATTR_RO(mode_counts_rows, fru);
> + fru_ctx->ecs_dev_attr[ECS_MODE_COUNTS_CODEWORDS] =
> + EDAC_ECS_ATTR_RO(mode_counts_codewords, fru);
> + fru_ctx->ecs_dev_attr[ECS_RESET] = EDAC_ECS_ATTR_WO(reset, fru);
> + fru_ctx->ecs_dev_attr[ECS_THRESHOLD] = EDAC_ECS_ATTR_RW(threshold, fru);
Clearly too long variable and define names. Shorten pls.
Also, a new line here:
<---
> + for (i = 0; i < ECS_MAX_ATTRS; i++)
> + fru_ctx->ecs_attrs[i] = &fru_ctx->ecs_dev_attr[i].dev_attr.attr;
> +
> + sprintf(fru_ctx->name, "%s%d", EDAC_ECS_FRU_NAME, fru);
> + group->name = fru_ctx->name;
> + group->attrs = fru_ctx->ecs_attrs;
> + group->is_visible = ecs_attr_visible;
> +
> + attr_groups[fru] = group;
> + }
> +
> + return 0;
> +}
> +
> +/**
> + * edac_ecs_get_desc - get EDAC ECS descriptors
> + * @ecs_dev: client device, supports ECS feature
> + * @attr_groups: pointer to attribute group container
> + * @num_media_frus: number of media FRUs in the device
> + *
> + * Return:
> + * * %0 - Success.
> + * * %-EINVAL - Invalid parameters passed.
> + * * %-ENOMEM - Dynamic memory allocation failed.
> + */
> +int edac_ecs_get_desc(struct device *ecs_dev,
> + const struct attribute_group **attr_groups, u16 num_media_frus)
> +{
> + if (!ecs_dev || !attr_groups || !num_media_frus)
> + return -EINVAL;
> +
> + return ecs_create_desc(ecs_dev, attr_groups, num_media_frus);
> +}
> diff --git a/drivers/edac/edac_device.c b/drivers/edac/edac_device.c
> index 91552271b34a..5fc3ec7f25eb 100644
> --- a/drivers/edac/edac_device.c
> +++ b/drivers/edac/edac_device.c
> @@ -626,6 +626,9 @@ int edac_dev_register(struct device *parent, char *name,
> attr_gcnt++;
> scrub_cnt++;
> break;
> + case RAS_FEAT_ECS:
> + attr_gcnt += ras_features[feat].ecs_info.num_media_frus;
> + break;
> default:
> return -EINVAL;
> }
> @@ -667,6 +670,18 @@ int edac_dev_register(struct device *parent, char *name,
> scrub_inst++;
> attr_gcnt++;
> break;
> + case RAS_FEAT_ECS:
> + if (!ras_features->ecs_ops)
> + goto data_mem_free;
<---- newline here.
> + dev_data = &ctx->ecs;
> + dev_data->ecs_ops = ras_features->ecs_ops;
> + dev_data->private = ras_features->ctx;
> + ret = edac_ecs_get_desc(parent, &ras_attr_groups[attr_gcnt],
> + ras_features->ecs_info.num_media_frus);
> + if (ret)
> + goto data_mem_free;
Ditto.
> + attr_gcnt += ras_features->ecs_info.num_media_frus;
> + break;
> default:
> ret = -EINVAL;
> goto data_mem_free;
--
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
^ permalink raw reply [flat|nested] 30+ messages in thread
* RE: [PATCH v14 03/14] EDAC: Add ECS control feature
2024-10-28 11:16 ` Borislav Petkov
@ 2024-10-28 16:03 ` Shiju Jose
2024-10-29 20:07 ` Borislav Petkov
0 siblings, 1 reply; 30+ messages in thread
From: Shiju Jose @ 2024-10-28 16:03 UTC (permalink / raw)
To: Borislav Petkov
Cc: linux-edac, linux-cxl, linux-acpi, linux-mm, linux-kernel,
tony.luck, rafael, lenb, mchehab, dan.j.williams, dave,
Jonathan Cameron, gregkh, sudeep.holla, jassisinghbrar,
dave.jiang, alison.schofield, vishal.l.verma, ira.weiny, david,
Vilas.Sridharan, leo.duran, Yazen.Ghannam, rientjes, jiaqiyan,
Jon.Grimm, dave.hansen, naoya.horiguchi, james.morse, jthoughton,
somasundaram.a, erdemaktas, pgonda, duenwen, gthelen, wschwartz,
dferguson, wbs, nifan.cxl, tanxiaofei, Zengtao (B),
Roberto Sassu, kangkang.shen, wanghuiqiang, Linuxarm
Thanks for the comments.
>-----Original Message-----
>From: Borislav Petkov <bp@alien8.de>
>Sent: 28 October 2024 11:17
>To: Shiju Jose <shiju.jose@huawei.com>
>Cc: linux-edac@vger.kernel.org; linux-cxl@vger.kernel.org; linux-
>acpi@vger.kernel.org; linux-mm@kvack.org; linux-kernel@vger.kernel.org;
>tony.luck@intel.com; rafael@kernel.org; lenb@kernel.org;
>mchehab@kernel.org; dan.j.williams@intel.com; dave@stgolabs.net; Jonathan
>Cameron <jonathan.cameron@huawei.com>; gregkh@linuxfoundation.org;
>sudeep.holla@arm.com; jassisinghbrar@gmail.com; dave.jiang@intel.com;
>alison.schofield@intel.com; vishal.l.verma@intel.com; ira.weiny@intel.com;
>david@redhat.com; Vilas.Sridharan@amd.com; leo.duran@amd.com;
>Yazen.Ghannam@amd.com; rientjes@google.com; jiaqiyan@google.com;
>Jon.Grimm@amd.com; dave.hansen@linux.intel.com;
>naoya.horiguchi@nec.com; james.morse@arm.com; jthoughton@google.com;
>somasundaram.a@hpe.com; erdemaktas@google.com; pgonda@google.com;
>duenwen@google.com; gthelen@google.com;
>wschwartz@amperecomputing.com; dferguson@amperecomputing.com;
>wbs@os.amperecomputing.com; nifan.cxl@gmail.com; tanxiaofei
><tanxiaofei@huawei.com>; Zengtao (B) <prime.zeng@hisilicon.com>; Roberto
>Sassu <roberto.sassu@huawei.com>; kangkang.shen@futurewei.com;
>wanghuiqiang <wanghuiqiang@huawei.com>; Linuxarm
><linuxarm@huawei.com>
>Subject: Re: [PATCH v14 03/14] EDAC: Add ECS control feature
>
>On Fri, Oct 25, 2024 at 06:13:44PM +0100, shiju.jose@huawei.com wrote:
>> +What: /sys/bus/edac/devices/<dev-
>name>/ecs_fruX/log_entry_type
>> +Date: Jan 2025
>> +KernelVersion: 6.13
>> +Contact: linux-edac@vger.kernel.org
>> +Description:
>> + (RW) The log entry type of how the DDR5 ECS log is reported.
>> + 00b - per DRAM.
>> + 01b - per memory media FRU.
>
>If the conversion function here is kstrtoul(), why are those values not "0"
>and "1" but in binary format?
Followed the description for the " Log Entry Type " in the CXL spec rev 3.1 Table 8-210.
DDR5 ECS Control Feature Readable Attributes and Table 8-211. DDR5 ECS Control Feature
Writable Attributes. This was written as " Common DDR5 ECS Log Capabilities " though actually returns
the status of the log_entry_type.
Common DDR5 ECS Log Capabilities
• Bits[1:0]: Log Entry Type: The log entry type of how the ECS log is
reported. The entry type is defined commonly for all memory media FRUs
within the device.
— 00b = Per DRAM
— 01b = Per Memory Media FRU
— All other encodings are reserved
• Bits[7:2]: Reserved.
I will update to 0 and 1.
>
>> +
>> +What: /sys/bus/edac/devices/<dev-
>name>/ecs_fruX/log_entry_type_per_dram
>> +Date: Jan 2025
>> +KernelVersion: 6.13
>> +Contact: linux-edac@vger.kernel.org
>> +Description:
>> + (RO) True if current log entry type is per DRAM.
>> +
>> +What: /sys/bus/edac/devices/<dev-
>name>/ecs_fruX/log_entry_type_per_memory_media
>> +Date: Jan 2025
>> +KernelVersion: 6.13
>> +Contact: linux-edac@vger.kernel.org
>> +Description:
>> + (RO) True if current log entry type is per memory media FRU.
>
>What's the point of those two if log_entry_type already gives you the same info?
>
This was written as " Common DDR5 ECS Log Capabilities " in the CXL spec rev 3.1
Table 8-210. DDR5 ECS Control Feature Readable Attributes, though actually returns
the status of the log_entry_type. I will remove these extra log type attributes.
>And the filename length is a bit too much...
>
>> +
>> +What: /sys/bus/edac/devices/<dev-name>/ecs_fruX/mode
>> +Date: Jan 2025
>> +KernelVersion: 6.13
>> +Contact: linux-edac@vger.kernel.org
>> +Description:
>> + (RW) The mode of how the DDR5 ECS counts the errors.
>> + 0 - ECS counts rows with errors.
>> + 1 - ECS counts codewords with errors.
>
>Now we have "0" and "1"s. Oh well.
>
>What are "rows", what are "codewords"? Explain them here pls for the user.
Will do.
>
>> +What: /sys/bus/edac/devices/<dev-
>name>/ecs_fruX/mode_counts_rows
>> +Date: Jan 2025
>> +KernelVersion: 6.13
>> +Contact: linux-edac@vger.kernel.org
>> +Description:
>> + (RO) True if current mode is ECS counts rows with errors.
>> +
>> +What: /sys/bus/edac/devices/<dev-
>name>/ecs_fruX/mode_counts_codewords
>> +Date: Jan 2025
>> +KernelVersion: 6.13
>> +Contact: linux-edac@vger.kernel.org
>> +Description:
>> + (RO) True if current mode is ECS counts codewords with errors.
>
>Same question as above - redundant files.
I will remove redundant files.
>
>> +What: /sys/bus/edac/devices/<dev-name>/ecs_fruX/reset
>> +Date: Jan 2025
>> +KernelVersion: 6.13
>> +Contact: linux-edac@vger.kernel.org
>> +Description:
>> + (WO) ECS reset ECC counter.
>> + 1 - reset ECC counter to the default value.
>
>1 or any value?
>
>Looks like any to me...
>
>You should restrict it to "1" in case you want to extend this interface with "2" in
>the future, for example, doing something a bit different.
I will update. Returns error for any other value set than '1'.
>
>> +
>> +What: /sys/bus/edac/devices/<dev-name>/ecs_fruX/threshold
>> +Date: Jan 2025
>> +KernelVersion: 6.13
>> +Contact: linux-edac@vger.kernel.org
>> +Description:
>> + (RW) ECS threshold count per gigabits of memory cells.
>
>That definitely needs more explanation.
Sure.
>
>> diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile index
>> 188501e676c7..b24c2c112d9c 100644
>> --- a/drivers/edac/Makefile
>> +++ b/drivers/edac/Makefile
>> @@ -10,7 +10,7 @@ obj-$(CONFIG_EDAC) := edac_core.o
>>
>> edac_core-y := edac_mc.o edac_device.o edac_mc_sysfs.o
>> edac_core-y += edac_module.o edac_device_sysfs.o wq.o
>> -edac_core-y += scrub.o
>> +edac_core-y += scrub.o ecs.o
>>
>> edac_core-$(CONFIG_EDAC_DEBUG) += debugfs.o
>>
>> diff --git a/drivers/edac/ecs.c b/drivers/edac/ecs.c new file mode
>> 100755 index 000000000000..a2b64d7bf6b6
>> --- /dev/null
>> +++ b/drivers/edac/ecs.c
>> @@ -0,0 +1,240 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Generic ECS driver in order to support control the on die
>> + * error check scrub (e.g. DDR5 ECS).
>
>This sentence needs grammar check.
Will do.
>
>> The common sysfs ECS
>> + * interface abstracts the control of an arbitrary ECS
>> + * functionality to a common set of functions.
>> + *
>> + * Copyright (c) 2024 HiSilicon Limited.
>> + */
>> +
>
>#undef pr_fmt
>
>> +#define pr_fmt(fmt) "EDAC ECS: " fmt
>
>Grep the tree for examples how to do that properly.
>
>Also, this pr_fmt looks unused.
I will remove.
>
>> +static umode_t ecs_attr_visible(struct kobject *kobj, struct
>> +attribute *a, int attr_id) {
>> + struct device *ras_feat_dev = kobj_to_dev(kobj);
>> + struct edac_dev_feat_ctx *ctx = dev_get_drvdata(ras_feat_dev);
>> + const struct edac_ecs_ops *ops = ctx->ecs.ecs_ops;
>> +
>> + switch (attr_id) {
>> + case ECS_LOG_ENTRY_TYPE:
>> + if (ops->get_log_entry_type) {
>> + if (ops->set_log_entry_type)
>> + return a->mode;
>> + else
>> + return 0444;
>
>What is the goal for the access mode of all those sysfs entries? I sure hope it is
>going to be root-only no-matter what. I don't want normal users to cause scrub
>activity. Please make sure your whole set does that.
This is the attribute_group's is_visible() callback for controlling the visibility
of the attributes based on whether attribute is added or not by the parent driver.
Yes. Writable only by the root.
>
>> + }
>> + break;
>> + case ECS_LOG_ENTRY_TYPE_PER_DRAM:
>> + if (ops->get_log_entry_type_per_dram)
>> + return a->mode;
>> + break;
[...]
> EDAC_ECS_ATTR_RO(log_entry_type_per_dram, fru);
>> + fru_ctx-
>>ecs_dev_attr[ECS_LOG_ENTRY_TYPE_PER_MEMORY_MEDIA] =
>> +
> EDAC_ECS_ATTR_RO(log_entry_type_per_memory_media, fru);
>> + fru_ctx->ecs_dev_attr[ECS_MODE] =
>EDAC_ECS_ATTR_RW(mode, fru);
>> + fru_ctx->ecs_dev_attr[ECS_MODE_COUNTS_ROWS] =
>> +
> EDAC_ECS_ATTR_RO(mode_counts_rows, fru);
>> + fru_ctx->ecs_dev_attr[ECS_MODE_COUNTS_CODEWORDS] =
>> +
> EDAC_ECS_ATTR_RO(mode_counts_codewords, fru);
>> + fru_ctx->ecs_dev_attr[ECS_RESET] =
>EDAC_ECS_ATTR_WO(reset, fru);
>> + fru_ctx->ecs_dev_attr[ECS_THRESHOLD] =
>EDAC_ECS_ATTR_RW(threshold,
>> +fru);
>
>Clearly too long variable and define names. Shorten pls.
Will do
>
>Also, a new line here:
Ok.
>
><---
>
>
[...]
>> + case RAS_FEAT_ECS:
>> + if (!ras_features->ecs_ops)
>> + goto data_mem_free;
>
><---- newline here.
Wil do.
>
>> + dev_data = &ctx->ecs;
>> + dev_data->ecs_ops = ras_features->ecs_ops;
>> + dev_data->private = ras_features->ctx;
>> + ret = edac_ecs_get_desc(parent,
>&ras_attr_groups[attr_gcnt],
>> + ras_features-
>>ecs_info.num_media_frus);
>> + if (ret)
>> + goto data_mem_free;
>
>Ditto.
Wil do.
>
>> + attr_gcnt += ras_features->ecs_info.num_media_frus;
>> + break;
>> default:
>> ret = -EINVAL;
>> goto data_mem_free;
>
>--
>Regards/Gruss,
> Boris.
Thanks,
Shiju
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH v14 05/14] cxl/mbox: Add GET_FEATURE mailbox command
2024-10-25 17:13 ` [PATCH v14 05/14] cxl/mbox: Add GET_FEATURE mailbox command shiju.jose
@ 2024-10-29 15:47 ` Dave Jiang
0 siblings, 0 replies; 30+ messages in thread
From: Dave Jiang @ 2024-10-29 15:47 UTC (permalink / raw)
To: shiju.jose, linux-edac, linux-cxl, linux-acpi, linux-mm, linux-kernel
Cc: bp, tony.luck, rafael, lenb, mchehab, dan.j.williams, dave,
jonathan.cameron, gregkh, sudeep.holla, jassisinghbrar,
alison.schofield, vishal.l.verma, ira.weiny, david,
Vilas.Sridharan, leo.duran, Yazen.Ghannam, rientjes, jiaqiyan,
Jon.Grimm, dave.hansen, naoya.horiguchi, james.morse, jthoughton,
somasundaram.a, erdemaktas, pgonda, duenwen, gthelen, wschwartz,
dferguson, wbs, nifan.cxl, tanxiaofei, prime.zeng, roberto.sassu,
kangkang.shen, wanghuiqiang, linuxarm
On 10/25/24 10:13 AM, shiju.jose@huawei.com wrote:
> From: Shiju Jose <shiju.jose@huawei.com>
>
> Add support for GET_FEATURE mailbox command.
>
> CXL spec 3.1 section 8.2.9.6 describes optional device specific features.
> The settings of a feature can be retrieved using Get Feature command.
> CXL spec 3.1 section 8.2.9.6.2 describes Get Feature command.
>
> Reviewed-by: Fan Ni <fan.ni@samsung.com>
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
> ---
> drivers/cxl/core/mbox.c | 41 +++++++++++++++++++++++++++++++++++++++++
> drivers/cxl/cxlmem.h | 26 ++++++++++++++++++++++++++
> 2 files changed, 67 insertions(+)
>
> diff --git a/drivers/cxl/core/mbox.c b/drivers/cxl/core/mbox.c
> index 5045960e3bfe..3cd4bce2872d 100644
> --- a/drivers/cxl/core/mbox.c
> +++ b/drivers/cxl/core/mbox.c
> @@ -970,6 +970,47 @@ int cxl_get_supported_feature_entry(struct cxl_memdev_state *mds, const uuid_t *
> }
> EXPORT_SYMBOL_NS_GPL(cxl_get_supported_feature_entry, CXL);
>
> +size_t cxl_get_feature(struct cxl_memdev_state *mds, const uuid_t feat_uuid,
> + enum cxl_get_feat_selection selection,
> + void *feat_out, size_t feat_out_size)
> +{
> + struct cxl_mailbox *cxl_mbox = &mds->cxlds.cxl_mbox;
> + size_t data_to_rd_size, size_out;
> + struct cxl_mbox_get_feat_in pi;
> + struct cxl_mbox_cmd mbox_cmd;
> + size_t data_rcvd_size = 0;
> + int rc;
> +
> + if (!feat_out || !feat_out_size)
> + return 0;
> +
> + size_out = min(feat_out_size, cxl_mbox->payload_size);
> + pi.uuid = feat_uuid;
> + pi.selection = selection;
> + do {
> + data_to_rd_size = min(feat_out_size - data_rcvd_size,
> + cxl_mbox->payload_size);
> + pi.offset = cpu_to_le16(data_rcvd_size);
> + pi.count = cpu_to_le16(data_to_rd_size);
> +
> + mbox_cmd = (struct cxl_mbox_cmd) {
> + .opcode = CXL_MBOX_OP_GET_FEATURE,
> + .size_in = sizeof(pi),
> + .payload_in = &pi,
> + .size_out = size_out,
> + .payload_out = feat_out + data_rcvd_size,
> + .min_out = data_to_rd_size,
> + };
> + rc = cxl_internal_send_cmd(cxl_mbox, &mbox_cmd);
> + if (rc < 0 || !mbox_cmd.size_out)
> + return 0;
> + data_rcvd_size += mbox_cmd.size_out;
> + } while (data_rcvd_size < feat_out_size);
> +
> + return data_rcvd_size;
> +}
> +EXPORT_SYMBOL_NS_GPL(cxl_get_feature, CXL);
> +
> /**
> * cxl_enumerate_cmds() - Enumerate commands for a device.
> * @mds: The driver data for the operation
> diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
> index f88b10188632..0c152719669a 100644
> --- a/drivers/cxl/cxlmem.h
> +++ b/drivers/cxl/cxlmem.h
> @@ -531,6 +531,7 @@ enum cxl_opcode {
> CXL_MBOX_OP_CLEAR_LOG = 0x0403,
> CXL_MBOX_OP_GET_SUP_LOG_SUBLIST = 0x0405,
> CXL_MBOX_OP_GET_SUPPORTED_FEATURES = 0x0500,
> + CXL_MBOX_OP_GET_FEATURE = 0x0501,
> CXL_MBOX_OP_IDENTIFY = 0x4000,
> CXL_MBOX_OP_GET_PARTITION_INFO = 0x4100,
> CXL_MBOX_OP_SET_PARTITION_INFO = 0x4101,
> @@ -856,6 +857,28 @@ struct cxl_mbox_get_sup_feats_out {
> struct cxl_feat_entry ents[] __counted_by_le(supported_feats);
> } __packed;
>
> +/*
> + * Get Feature CXL 3.1 Spec 8.2.9.6.2
> + */
> +
> +/*
> + * Get Feature input payload
> + * CXL rev 3.1 section 8.2.9.6.2 Table 8-99
> + */
> +enum cxl_get_feat_selection {
> + CXL_GET_FEAT_SEL_CURRENT_VALUE,
> + CXL_GET_FEAT_SEL_DEFAULT_VALUE,
> + CXL_GET_FEAT_SEL_SAVED_VALUE,
> + CXL_GET_FEAT_SEL_MAX
> +};
> +
> +struct cxl_mbox_get_feat_in {
> + uuid_t uuid;
> + __le16 offset;
> + __le16 count;
> + u8 selection;
> +} __packed;
> +
> int cxl_internal_send_cmd(struct cxl_mailbox *cxl_mbox,
> struct cxl_mbox_cmd *cmd);
> int cxl_dev_state_identify(struct cxl_memdev_state *mds);
> @@ -919,4 +942,7 @@ void cxl_dpa_debug(struct seq_file *file, struct cxl_dev_state *cxlds);
> int cxl_get_supported_features(struct cxl_memdev_state *mds);
> int cxl_get_supported_feature_entry(struct cxl_memdev_state *mds, const uuid_t *feat_uuid,
> struct cxl_feat_entry *feat_entry_out);
> +size_t cxl_get_feature(struct cxl_memdev_state *mds, const uuid_t feat_uuid,
> + enum cxl_get_feat_selection selection,
> + void *feat_out, size_t feat_out_size);
> #endif /* __CXL_MEM_H__ */
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH v14 06/14] cxl/mbox: Add SET_FEATURE mailbox command
2024-10-25 17:13 ` [PATCH v14 06/14] cxl/mbox: Add SET_FEATURE " shiju.jose
@ 2024-10-29 15:51 ` Dave Jiang
0 siblings, 0 replies; 30+ messages in thread
From: Dave Jiang @ 2024-10-29 15:51 UTC (permalink / raw)
To: shiju.jose, linux-edac, linux-cxl, linux-acpi, linux-mm, linux-kernel
Cc: bp, tony.luck, rafael, lenb, mchehab, dan.j.williams, dave,
jonathan.cameron, gregkh, sudeep.holla, jassisinghbrar,
alison.schofield, vishal.l.verma, ira.weiny, david,
Vilas.Sridharan, leo.duran, Yazen.Ghannam, rientjes, jiaqiyan,
Jon.Grimm, dave.hansen, naoya.horiguchi, james.morse, jthoughton,
somasundaram.a, erdemaktas, pgonda, duenwen, gthelen, wschwartz,
dferguson, wbs, nifan.cxl, tanxiaofei, prime.zeng, roberto.sassu,
kangkang.shen, wanghuiqiang, linuxarm
On 10/25/24 10:13 AM, shiju.jose@huawei.com wrote:
> From: Shiju Jose <shiju.jose@huawei.com>
>
> Add support for SET_FEATURE mailbox command.
>
> CXL spec 3.1 section 8.2.9.6 describes optional device specific features.
> CXL devices support features with changeable attributes.
> The settings of a feature can be optionally modified using Set Feature
> command.
> CXL spec 3.1 section 8.2.9.6.3 describes Set Feature command.
>
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
> ---
> drivers/cxl/core/mbox.c | 73 +++++++++++++++++++++++++++++++++++++++++
> drivers/cxl/cxlmem.h | 34 +++++++++++++++++++
> 2 files changed, 107 insertions(+)
>
> diff --git a/drivers/cxl/core/mbox.c b/drivers/cxl/core/mbox.c
> index 3cd4bce2872d..4b9e62de164b 100644
> --- a/drivers/cxl/core/mbox.c
> +++ b/drivers/cxl/core/mbox.c
> @@ -1011,6 +1011,79 @@ size_t cxl_get_feature(struct cxl_memdev_state *mds, const uuid_t feat_uuid,
> }
> EXPORT_SYMBOL_NS_GPL(cxl_get_feature, CXL);
>
> +/*
> + * FEAT_DATA_MIN_PAYLOAD_SIZE - min extra number of bytes should be
> + * available in the mailbox for storing the actual feature data so that
> + * the feature data transfer would work as expected.
> + */
> +#define FEAT_DATA_MIN_PAYLOAD_SIZE 10
> +int cxl_set_feature(struct cxl_memdev_state *mds,
> + const uuid_t feat_uuid, u8 feat_version,
> + void *feat_data, size_t feat_data_size,
> + u8 feat_flag)
> +{
> + struct cxl_mailbox *cxl_mbox = &mds->cxlds.cxl_mbox;
> + struct cxl_memdev_set_feat_pi {
> + struct cxl_mbox_set_feat_hdr hdr;
> + u8 feat_data[];
> + } __packed;
> + size_t data_in_size, data_sent_size = 0;
> + struct cxl_mbox_cmd mbox_cmd;
> + size_t hdr_size;
> + int rc = 0;
> +
> + struct cxl_memdev_set_feat_pi *pi __free(kfree) =
> + kmalloc(cxl_mbox->payload_size, GFP_KERNEL);
> + pi->hdr.uuid = feat_uuid;
> + pi->hdr.version = feat_version;
> + feat_flag &= ~CXL_SET_FEAT_FLAG_DATA_TRANSFER_MASK;
> + feat_flag |= CXL_SET_FEAT_FLAG_DATA_SAVED_ACROSS_RESET;
> + hdr_size = sizeof(pi->hdr);
> + /*
> + * Check minimum mbox payload size is available for
> + * the feature data transfer.
> + */
> + if (hdr_size + FEAT_DATA_MIN_PAYLOAD_SIZE > cxl_mbox->payload_size)
> + return -ENOMEM;
> +
> + if ((hdr_size + feat_data_size) <= cxl_mbox->payload_size) {
> + pi->hdr.flags = cpu_to_le32(feat_flag |
> + CXL_SET_FEAT_FLAG_FULL_DATA_TRANSFER);
> + data_in_size = feat_data_size;
> + } else {
> + pi->hdr.flags = cpu_to_le32(feat_flag |
> + CXL_SET_FEAT_FLAG_INITIATE_DATA_TRANSFER);
> + data_in_size = cxl_mbox->payload_size - hdr_size;
> + }
> +
> + do {
> + pi->hdr.offset = cpu_to_le16(data_sent_size);
> + memcpy(pi->feat_data, feat_data + data_sent_size, data_in_size);
> + mbox_cmd = (struct cxl_mbox_cmd) {
> + .opcode = CXL_MBOX_OP_SET_FEATURE,
> + .size_in = hdr_size + data_in_size,
> + .payload_in = pi,
> + };
> + rc = cxl_internal_send_cmd(cxl_mbox, &mbox_cmd);
> + if (rc < 0)
> + return rc;
> +
> + data_sent_size += data_in_size;
> + if (data_sent_size >= feat_data_size)
> + return 0;
> +
> + if ((feat_data_size - data_sent_size) <= (cxl_mbox->payload_size - hdr_size)) {
> + data_in_size = feat_data_size - data_sent_size;
> + pi->hdr.flags = cpu_to_le32(feat_flag |
> + CXL_SET_FEAT_FLAG_FINISH_DATA_TRANSFER);
> + } else {
> + pi->hdr.flags = cpu_to_le32(feat_flag |
> + CXL_SET_FEAT_FLAG_CONTINUE_DATA_TRANSFER);
> + }
> + } while (true);
> +}
> +EXPORT_SYMBOL_NS_GPL(cxl_set_feature, CXL);
> +
> /**
> * cxl_enumerate_cmds() - Enumerate commands for a device.
> * @mds: The driver data for the operation
> diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
> index 0c152719669a..fb356be8b426 100644
> --- a/drivers/cxl/cxlmem.h
> +++ b/drivers/cxl/cxlmem.h
> @@ -532,6 +532,7 @@ enum cxl_opcode {
> CXL_MBOX_OP_GET_SUP_LOG_SUBLIST = 0x0405,
> CXL_MBOX_OP_GET_SUPPORTED_FEATURES = 0x0500,
> CXL_MBOX_OP_GET_FEATURE = 0x0501,
> + CXL_MBOX_OP_SET_FEATURE = 0x0502,
> CXL_MBOX_OP_IDENTIFY = 0x4000,
> CXL_MBOX_OP_GET_PARTITION_INFO = 0x4100,
> CXL_MBOX_OP_SET_PARTITION_INFO = 0x4101,
> @@ -879,6 +880,35 @@ struct cxl_mbox_get_feat_in {
> u8 selection;
> } __packed;
>
> +/*
> + * Set Feature CXL 3.1 Spec 8.2.9.6.3
> + */
> +
> +/*
> + * Set Feature input payload
> + * CXL rev 3.1 section 8.2.9.6.3 Table 8-101
> + */
> +/* Set Feature : Payload in flags */
> +#define CXL_SET_FEAT_FLAG_DATA_TRANSFER_MASK GENMASK(2, 0)
> +enum cxl_set_feat_flag_data_transfer {
> + CXL_SET_FEAT_FLAG_FULL_DATA_TRANSFER,
> + CXL_SET_FEAT_FLAG_INITIATE_DATA_TRANSFER,
> + CXL_SET_FEAT_FLAG_CONTINUE_DATA_TRANSFER,
> + CXL_SET_FEAT_FLAG_FINISH_DATA_TRANSFER,
> + CXL_SET_FEAT_FLAG_ABORT_DATA_TRANSFER,
> + CXL_SET_FEAT_FLAG_DATA_TRANSFER_MAX
> +};
> +
> +#define CXL_SET_FEAT_FLAG_DATA_SAVED_ACROSS_RESET BIT(3)
> +
> +struct cxl_mbox_set_feat_hdr {
> + uuid_t uuid;
> + __le32 flags;
> + __le16 offset;
> + u8 version;
> + u8 rsvd[9];
> +} __packed;
> +
> int cxl_internal_send_cmd(struct cxl_mailbox *cxl_mbox,
> struct cxl_mbox_cmd *cmd);
> int cxl_dev_state_identify(struct cxl_memdev_state *mds);
> @@ -945,4 +975,8 @@ int cxl_get_supported_feature_entry(struct cxl_memdev_state *mds, const uuid_t *
> size_t cxl_get_feature(struct cxl_memdev_state *mds, const uuid_t feat_uuid,
> enum cxl_get_feat_selection selection,
> void *feat_out, size_t feat_out_size);
> +int cxl_set_feature(struct cxl_memdev_state *mds,
> + const uuid_t feat_uuid, u8 feat_version,
> + void *feat_data, size_t feat_data_size,
> + u8 feat_flag);
> #endif /* __CXL_MEM_H__ */
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH v14 07/14] cxl/memfeature: Add CXL memory device patrol scrub control feature
2024-10-25 17:13 ` [PATCH v14 07/14] cxl/memfeature: Add CXL memory device patrol scrub control feature shiju.jose
@ 2024-10-29 16:31 ` Dave Jiang
2024-10-29 17:00 ` Shiju Jose
2024-10-29 20:15 ` Borislav Petkov
2024-10-29 20:16 ` Borislav Petkov
2 siblings, 1 reply; 30+ messages in thread
From: Dave Jiang @ 2024-10-29 16:31 UTC (permalink / raw)
To: shiju.jose, linux-edac, linux-cxl, linux-acpi, linux-mm, linux-kernel
Cc: bp, tony.luck, rafael, lenb, mchehab, dan.j.williams, dave,
jonathan.cameron, gregkh, sudeep.holla, jassisinghbrar,
alison.schofield, vishal.l.verma, ira.weiny, david,
Vilas.Sridharan, leo.duran, Yazen.Ghannam, rientjes, jiaqiyan,
Jon.Grimm, dave.hansen, naoya.horiguchi, james.morse, jthoughton,
somasundaram.a, erdemaktas, pgonda, duenwen, gthelen, wschwartz,
dferguson, wbs, nifan.cxl, tanxiaofei, prime.zeng, roberto.sassu,
kangkang.shen, wanghuiqiang, linuxarm
On 10/25/24 10:13 AM, shiju.jose@huawei.com wrote:
> From: Shiju Jose <shiju.jose@huawei.com>
>
> CXL spec 3.1 section 8.2.9.9.11.1 describes the device patrol scrub control
> feature. The device patrol scrub proactively locates and makes corrections
> to errors in regular cycle.
>
> Allow specifying the number of hours within which the patrol scrub must be
> completed, subject to minimum and maximum limits reported by the device.
> Also allow disabling scrub allowing trade-off error rates against
> performance.
>
> Add support for patrol scrub control on CXL memory devices.
> Register with the EDAC device driver, which retrieves the scrub attribute
> descriptors from EDAC scrub and exposes the sysfs scrub control attributes
> to userspace. For example, scrub control for the CXL memory device
> "cxl_mem0" is exposed in /sys/bus/edac/devices/cxl_mem0/scrubX/.
>
> Additionally, add support for region-based CXL memory patrol scrub control.
> CXL memory regions may be interleaved across one or more CXL memory
> devices. For example, region-based scrub control for "cxl_region1" is
> exposed in /sys/bus/edac/devices/cxl_region1/scrubX/.
>
> Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
> ---
> Documentation/edac/edac-scrub.rst | 74 ++++++
> drivers/cxl/Kconfig | 18 ++
> drivers/cxl/core/Makefile | 1 +
> drivers/cxl/core/memfeature.c | 381 ++++++++++++++++++++++++++++++
> drivers/cxl/core/region.c | 6 +
> drivers/cxl/cxlmem.h | 7 +
> drivers/cxl/mem.c | 4 +
> 7 files changed, 491 insertions(+)
> create mode 100644 Documentation/edac/edac-scrub.rst
> create mode 100644 drivers/cxl/core/memfeature.c
>
> diff --git a/Documentation/edac/edac-scrub.rst b/Documentation/edac/edac-scrub.rst
> new file mode 100644
> index 000000000000..4aad4974b208
> --- /dev/null
> +++ b/Documentation/edac/edac-scrub.rst
> @@ -0,0 +1,74 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +===================
> +EDAC Scrub control
> +===================
> +
> +Copyright (c) 2024 HiSilicon Limited.
> +
> +:Author: Shiju Jose <shiju.jose@huawei.com>
> +:License: The GNU Free Documentation License, Version 1.2
> + (dual licensed under the GPL v2)
> +:Original Reviewers:
> +
> +- Written for: 6.13
> +- Updated for:
> +
> +Introduction
> +------------
> +The EDAC enhancement for RAS featurues exposes interfaces for controlling
> +the memory scrubbers in the system. The scrub device drivers in the
> +system register with the EDAC scrub. The driver exposes the
> +scrub controls to user in the sysfs.
> +
> +The File System
> +---------------
> +
> +The control attributes of the registered scrubber instance could be
> +accessed in the /sys/bus/edac/devices/<dev-name>/scrub*/
> +
> +sysfs
> +-----
> +
> +Sysfs files are documented in
> +`Documentation/ABI/testing/sysfs-edac-scrub-control`.
> +
> +Example
> +-------
> +
> +The usage takes the form shown in this example::
> +
> +1. CXL memory device patrol scrubber
> +1.1 device based
> +root@localhost:~# cat /sys/bus/edac/devices/cxl_mem0/scrub0/min_cycle_duration
> +3600
> +root@localhost:~# cat /sys/bus/edac/devices/cxl_mem0/scrub0/max_cycle_duration
> +918000
> +root@localhost:~# cat /sys/bus/edac/devices/cxl_mem0/scrub0/current_cycle_duration
> +43200
> +root@localhost:~# echo 54000 > /sys/bus/edac/devices/cxl_mem0/scrub0/current_cycle_duration
> +root@localhost:~# cat /sys/bus/edac/devices/cxl_mem0/scrub0/current_cycle_duration
> +54000
> +root@localhost:~# echo 1 > /sys/bus/edac/devices/cxl_mem0/scrub0/enable_background
> +root@localhost:~# cat /sys/bus/edac/devices/cxl_mem0/scrub0/enable_background
> +1
> +root@localhost:~# echo 0 > /sys/bus/edac/devices/cxl_mem0/scrub0/enable_background
> +root@localhost:~# cat /sys/bus/edac/devices/cxl_mem0/scrub0/enable_background
> +0
> +
> +1.2. region based
> +root@localhost:~# cat /sys/bus/edac/devices/cxl_region0/scrub0/min_cycle_duration
> +3600
> +root@localhost:~# cat /sys/bus/edac/devices/cxl_region0/scrub0/max_cycle_duration
> +918000
> +root@localhost:~# cat /sys/bus/edac/devices/cxl_region0/scrub0/current_cycle_duration
> +43200
> +root@localhost:~# echo 54000 > /sys/bus/edac/devices/cxl_region0/scrub0/current_cycle_duration
> +root@localhost:~# cat /sys/bus/edac/devices/cxl_region0/scrub0/current_cycle_duration
> +54000
> +root@localhost:~# echo 1 > /sys/bus/edac/devices/cxl_region0/scrub0/enable_background
> +root@localhost:~# cat /sys/bus/edac/devices/cxl_region0/scrub0/enable_background
> +1
> +root@localhost:~# echo 0 > /sys/bus/edac/devices/cxl_region0/scrub0/enable_background
> +root@localhost:~# cat /sys/bus/edac/devices/cxl_region0/scrub0/enable_background
> +0
> diff --git a/drivers/cxl/Kconfig b/drivers/cxl/Kconfig
> index 29c192f20082..6d79fb3e772e 100644
> --- a/drivers/cxl/Kconfig
> +++ b/drivers/cxl/Kconfig
> @@ -145,4 +145,22 @@ config CXL_REGION_INVALIDATION_TEST
> If unsure, or if this kernel is meant for production environments,
> say N.
>
> +config CXL_RAS_FEAT
> + tristate "CXL: Memory RAS features"
> + depends on CXL_PCI
> + depends on CXL_MEM
> + depends on EDAC
> + help
> + The CXL memory RAS feature control is optional and allows host to
> + control the RAS features configurations of CXL Type 3 devices.
> +
> + It registers with the EDAC device subsystem to expose control
> + attributes of CXL memory device's RAS features to the user.
> + It provides interface functions to support configuring the CXL
> + memory device's RAS features.
> +
> + Say 'y/m/n' to enable/disable control of the CXL.mem device's RAS features.
> + See section 8.2.9.9.11 of CXL 3.1 specification for the detailed
> + information of CXL memory device features.
> +
> endif
> diff --git a/drivers/cxl/core/Makefile b/drivers/cxl/core/Makefile
> index 9259bcc6773c..2a3c7197bc23 100644
> --- a/drivers/cxl/core/Makefile
> +++ b/drivers/cxl/core/Makefile
> @@ -16,3 +16,4 @@ cxl_core-y += pmu.o
> cxl_core-y += cdat.o
> cxl_core-$(CONFIG_TRACING) += trace.o
> cxl_core-$(CONFIG_CXL_REGION) += region.o
> +cxl_core-$(CONFIG_CXL_RAS_FEAT) += memfeature.o
> diff --git a/drivers/cxl/core/memfeature.c b/drivers/cxl/core/memfeature.c
> new file mode 100644
> index 000000000000..8fff00f62f8c
> --- /dev/null
> +++ b/drivers/cxl/core/memfeature.c
> @@ -0,0 +1,381 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * CXL memory RAS feature driver.
> + *
> + * Copyright (c) 2024 HiSilicon Limited.
> + *
> + * - Supports functions to configure RAS features of the
> + * CXL memory devices.
> + * - Registers with the EDAC device subsystem driver to expose
> + * the features sysfs attributes to the user for configuring
> + * CXL memory RAS feature.
> + */
> +
> +#define pr_fmt(fmt) "CXL MEM FEAT: " fmt
> +
> +#include <linux/cleanup.h>
> +#include <linux/edac.h>
> +#include <linux/limits.h>
> +#include <cxl.h>
> +#include <cxlmem.h>
> +
> +#define CXL_DEV_NUM_RAS_FEATURES 1
> +#define CXL_DEV_HOUR_IN_SECS 3600
> +
> +#define CXL_SCRUB_NAME_LEN 128
> +
> +/* CXL memory patrol scrub control definitions */
> +static const uuid_t cxl_patrol_scrub_uuid =
> + UUID_INIT(0x96dad7d6, 0xfde8, 0x482b, 0xa7, 0x33, 0x75, 0x77, 0x4e, 0x06, 0xdb, 0x8a);
> +
> +/* CXL memory patrol scrub control functions */
> +struct cxl_patrol_scrub_context {
> + u8 instance;
> + u16 get_feat_size;
> + u16 set_feat_size;
> + u8 get_version;
> + u8 set_version;
> + u16 set_effects;
> + struct cxl_memdev *cxlmd;
> + struct cxl_region *cxlr;
> +};
> +
> +/**
> + * struct cxl_memdev_ps_params - CXL memory patrol scrub parameter data structure.
> + * @enable: [IN & OUT] enable(1)/disable(0) patrol scrub.
> + * @scrub_cycle_changeable: [OUT] scrub cycle attribute of patrol scrub is changeable.
> + * @scrub_cycle_hrs: [IN] Requested patrol scrub cycle in hours.
> + * [OUT] Current patrol scrub cycle in hours.
> + * @min_scrub_cycle_hrs:[OUT] minimum patrol scrub cycle in hours supported.
> + */
> +struct cxl_memdev_ps_params {
> + bool enable;
> + bool scrub_cycle_changeable;
> + u16 scrub_cycle_hrs;
> + u16 min_scrub_cycle_hrs;
> +};
> +
> +enum cxl_scrub_param {
> + CXL_PS_PARAM_ENABLE,
> + CXL_PS_PARAM_SCRUB_CYCLE,
> +};
> +
> +#define CXL_MEMDEV_PS_SCRUB_CYCLE_CHANGE_CAP_MASK BIT(0)
> +#define CXL_MEMDEV_PS_SCRUB_CYCLE_REALTIME_REPORT_CAP_MASK BIT(1)
> +#define CXL_MEMDEV_PS_CUR_SCRUB_CYCLE_MASK GENMASK(7, 0)
> +#define CXL_MEMDEV_PS_MIN_SCRUB_CYCLE_MASK GENMASK(15, 8)
> +#define CXL_MEMDEV_PS_FLAG_ENABLED_MASK BIT(0)
> +
> +struct cxl_memdev_ps_rd_attrs {
> + u8 scrub_cycle_cap;
> + __le16 scrub_cycle_hrs;
> + u8 scrub_flags;
> +} __packed;
> +
> +struct cxl_memdev_ps_wr_attrs {
> + u8 scrub_cycle_hrs;
> + u8 scrub_flags;
> +} __packed;
> +
> +static int cxl_mem_ps_get_attrs(struct cxl_memdev_state *mds,
> + struct cxl_memdev_ps_params *params)
> +{
> + size_t rd_data_size = sizeof(struct cxl_memdev_ps_rd_attrs);
> + size_t data_size;
> + struct cxl_memdev_ps_rd_attrs *rd_attrs __free(kfree) =
> + kmalloc(rd_data_size, GFP_KERNEL);
> + if (!rd_attrs)
> + return -ENOMEM;
> +
> + data_size = cxl_get_feature(mds, cxl_patrol_scrub_uuid,
> + CXL_GET_FEAT_SEL_CURRENT_VALUE,
> + rd_attrs, rd_data_size);
> + if (!data_size)
> + return -EIO;
> +
> + params->scrub_cycle_changeable = FIELD_GET(CXL_MEMDEV_PS_SCRUB_CYCLE_CHANGE_CAP_MASK,
> + rd_attrs->scrub_cycle_cap);
> + params->enable = FIELD_GET(CXL_MEMDEV_PS_FLAG_ENABLED_MASK,
> + rd_attrs->scrub_flags);
> + params->scrub_cycle_hrs = FIELD_GET(CXL_MEMDEV_PS_CUR_SCRUB_CYCLE_MASK,
> + rd_attrs->scrub_cycle_hrs);
> + params->min_scrub_cycle_hrs = FIELD_GET(CXL_MEMDEV_PS_MIN_SCRUB_CYCLE_MASK,
> + rd_attrs->scrub_cycle_hrs);
> +
> + return 0;
> +}
> +
> +static int cxl_ps_get_attrs(struct device *dev, void *drv_data,
Would a union be better than a void *drv_data for all the places this is used as a parameter? How many variations of this are there?
DJ
> + struct cxl_memdev_ps_params *params)
> +{
> + struct cxl_patrol_scrub_context *cxl_ps_ctx = drv_data;
> + struct cxl_memdev *cxlmd;
> + struct cxl_dev_state *cxlds;
> + struct cxl_memdev_state *mds;
> + u16 min_scrub_cycle = 0;
> + int i, ret;
> +
> + if (cxl_ps_ctx->cxlr) {
> + struct cxl_region *cxlr = cxl_ps_ctx->cxlr;
> + struct cxl_region_params *p = &cxlr->params;
> +
> + for (i = p->interleave_ways - 1; i >= 0; i--) {
> + struct cxl_endpoint_decoder *cxled = p->targets[i];
> +
> + cxlmd = cxled_to_memdev(cxled);
> + cxlds = cxlmd->cxlds;
> + mds = to_cxl_memdev_state(cxlds);
> + ret = cxl_mem_ps_get_attrs(mds, params);
> + if (ret)
> + return ret;
> +
> + if (params->min_scrub_cycle_hrs > min_scrub_cycle)
> + min_scrub_cycle = params->min_scrub_cycle_hrs;
> + }
> + params->min_scrub_cycle_hrs = min_scrub_cycle;
> + return 0;
> + }
> + cxlmd = cxl_ps_ctx->cxlmd;
> + cxlds = cxlmd->cxlds;
> + mds = to_cxl_memdev_state(cxlds);
> +
> + return cxl_mem_ps_get_attrs(mds, params);
> +}
> +
> +static int cxl_mem_ps_set_attrs(struct device *dev, void *drv_data,
> + struct cxl_memdev_state *mds,
> + struct cxl_memdev_ps_params *params,
> + enum cxl_scrub_param param_type)
> +{
> + struct cxl_patrol_scrub_context *cxl_ps_ctx = drv_data;
> + struct cxl_memdev_ps_wr_attrs wr_attrs;
> + struct cxl_memdev_ps_params rd_params;
> + int ret;
> +
> + ret = cxl_mem_ps_get_attrs(mds, &rd_params);
> + if (ret) {
> + dev_err(dev, "Get cxlmemdev patrol scrub params failed ret=%d\n",
> + ret);
> + return ret;
> + }
> +
> + switch (param_type) {
> + case CXL_PS_PARAM_ENABLE:
> + wr_attrs.scrub_flags = FIELD_PREP(CXL_MEMDEV_PS_FLAG_ENABLED_MASK,
> + params->enable);
> + wr_attrs.scrub_cycle_hrs = FIELD_PREP(CXL_MEMDEV_PS_CUR_SCRUB_CYCLE_MASK,
> + rd_params.scrub_cycle_hrs);
> + break;
> + case CXL_PS_PARAM_SCRUB_CYCLE:
> + if (params->scrub_cycle_hrs < rd_params.min_scrub_cycle_hrs) {
> + dev_err(dev, "Invalid CXL patrol scrub cycle(%d) to set\n",
> + params->scrub_cycle_hrs);
> + dev_err(dev, "Minimum supported CXL patrol scrub cycle in hour %d\n",
> + rd_params.min_scrub_cycle_hrs);
> + return -EINVAL;
> + }
> + wr_attrs.scrub_cycle_hrs = FIELD_PREP(CXL_MEMDEV_PS_CUR_SCRUB_CYCLE_MASK,
> + params->scrub_cycle_hrs);
> + wr_attrs.scrub_flags = FIELD_PREP(CXL_MEMDEV_PS_FLAG_ENABLED_MASK,
> + rd_params.enable);
> + break;
> + }
> +
> + ret = cxl_set_feature(mds, cxl_patrol_scrub_uuid,
> + cxl_ps_ctx->set_version,
> + &wr_attrs, sizeof(wr_attrs),
> + CXL_SET_FEAT_FLAG_DATA_SAVED_ACROSS_RESET);
> + if (ret) {
> + dev_err(dev, "CXL patrol scrub set feature failed ret=%d\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int cxl_ps_set_attrs(struct device *dev, void *drv_data,
> + struct cxl_memdev_ps_params *params,
> + enum cxl_scrub_param param_type)
> +{
> + struct cxl_patrol_scrub_context *cxl_ps_ctx = drv_data;
> + struct cxl_memdev *cxlmd;
> + struct cxl_dev_state *cxlds;
> + struct cxl_memdev_state *mds;
> + int ret, i;
> +
> + if (cxl_ps_ctx->cxlr) {
> + struct cxl_region *cxlr = cxl_ps_ctx->cxlr;
> + struct cxl_region_params *p = &cxlr->params;
> +
> + for (i = p->interleave_ways - 1; i >= 0; i--) {
> + struct cxl_endpoint_decoder *cxled = p->targets[i];
> +
> + cxlmd = cxled_to_memdev(cxled);
> + cxlds = cxlmd->cxlds;
> + mds = to_cxl_memdev_state(cxlds);
> + ret = cxl_mem_ps_set_attrs(dev, drv_data, mds,
> + params, param_type);
> + if (ret)
> + return ret;
> + }
> + return 0;
> + }
> + cxlmd = cxl_ps_ctx->cxlmd;
> + cxlds = cxlmd->cxlds;
> + mds = to_cxl_memdev_state(cxlds);
> +
> + return cxl_mem_ps_set_attrs(dev, drv_data, mds, params, param_type);
> +}
> +
> +static int cxl_patrol_scrub_get_enabled_bg(struct device *dev, void *drv_data, bool *enabled)
> +{
> + struct cxl_memdev_ps_params params;
> + int ret;
> +
> + ret = cxl_ps_get_attrs(dev, drv_data, ¶ms);
> + if (ret)
> + return ret;
> +
> + *enabled = params.enable;
> +
> + return 0;
> +}
> +
> +static int cxl_patrol_scrub_set_enabled_bg(struct device *dev, void *drv_data, bool enable)
> +{
> + struct cxl_memdev_ps_params params = {
> + .enable = enable,
> + };
> +
> + return cxl_ps_set_attrs(dev, drv_data, ¶ms, CXL_PS_PARAM_ENABLE);
> +}
> +
> +static int cxl_patrol_scrub_read_min_scrub_cycle(struct device *dev, void *drv_data,
> + u32 *min)
> +{
> + struct cxl_memdev_ps_params params;
> + int ret;
> +
> + ret = cxl_ps_get_attrs(dev, drv_data, ¶ms);
> + if (ret)
> + return ret;
> + *min = params.min_scrub_cycle_hrs * CXL_DEV_HOUR_IN_SECS;
> +
> + return 0;
> +}
> +
> +static int cxl_patrol_scrub_read_max_scrub_cycle(struct device *dev, void *drv_data,
> + u32 *max)
> +{
> + *max = U8_MAX * CXL_DEV_HOUR_IN_SECS; /* Max set by register size */
> +
> + return 0;
> +}
> +
> +static int cxl_patrol_scrub_read_scrub_cycle(struct device *dev, void *drv_data,
> + u32 *scrub_cycle_secs)
> +{
> + struct cxl_memdev_ps_params params;
> + int ret;
> +
> + ret = cxl_ps_get_attrs(dev, drv_data, ¶ms);
> + if (ret)
> + return ret;
> +
> + *scrub_cycle_secs = params.scrub_cycle_hrs * CXL_DEV_HOUR_IN_SECS;
> +
> + return 0;
> +}
> +
> +static int cxl_patrol_scrub_write_scrub_cycle(struct device *dev, void *drv_data,
> + u32 scrub_cycle_secs)
> +{
> + struct cxl_memdev_ps_params params = {
> + .scrub_cycle_hrs = scrub_cycle_secs / CXL_DEV_HOUR_IN_SECS,
> + };
> +
> + return cxl_ps_set_attrs(dev, drv_data, ¶ms, CXL_PS_PARAM_SCRUB_CYCLE);
> +}
> +
> +static const struct edac_scrub_ops cxl_ps_scrub_ops = {
> + .get_enabled_bg = cxl_patrol_scrub_get_enabled_bg,
> + .set_enabled_bg = cxl_patrol_scrub_set_enabled_bg,
> + .get_min_cycle = cxl_patrol_scrub_read_min_scrub_cycle,
> + .get_max_cycle = cxl_patrol_scrub_read_max_scrub_cycle,
> + .get_cycle_duration = cxl_patrol_scrub_read_scrub_cycle,
> + .set_cycle_duration = cxl_patrol_scrub_write_scrub_cycle,
> +};
> +
> +int cxl_mem_ras_features_init(struct cxl_memdev *cxlmd, struct cxl_region *cxlr)
> +{
> + struct edac_dev_feature ras_features[CXL_DEV_NUM_RAS_FEATURES];
> + struct cxl_patrol_scrub_context *cxl_ps_ctx;
> + char cxl_dev_name[CXL_SCRUB_NAME_LEN];
> + struct cxl_feat_entry feat_entry;
> + struct cxl_memdev_state *mds;
> + struct cxl_dev_state *cxlds;
> + int num_ras_features = 0;
> + u8 scrub_inst = 0;
> + int rc, i;
> +
> + if (cxlr) {
> + struct cxl_region_params *p = &cxlr->params;
> +
> + for (i = p->interleave_ways - 1; i >= 0; i--) {
> + struct cxl_endpoint_decoder *cxled = p->targets[i];
> +
> + cxlmd = cxled_to_memdev(cxled);
> + cxlds = cxlmd->cxlds;
> + mds = to_cxl_memdev_state(cxlds);
> + memset(&feat_entry, 0, sizeof(feat_entry));
> + rc = cxl_get_supported_feature_entry(mds, &cxl_patrol_scrub_uuid,
> + &feat_entry);
> + if (rc < 0)
> + return rc;
> + if (!(feat_entry.attr_flags & CXL_FEAT_ENTRY_FLAG_CHANGABLE))
> + return -EOPNOTSUPP;
> + }
> + } else {
> + cxlds = cxlmd->cxlds;
> + mds = to_cxl_memdev_state(cxlds);
> + rc = cxl_get_supported_feature_entry(mds, &cxl_patrol_scrub_uuid,
> + &feat_entry);
> + if (rc < 0)
> + return rc;
> +
> + if (!(feat_entry.attr_flags & CXL_FEAT_ENTRY_FLAG_CHANGABLE))
> + return -EOPNOTSUPP;
> + }
> +
> + cxl_ps_ctx = devm_kzalloc(&cxlmd->dev, sizeof(*cxl_ps_ctx), GFP_KERNEL);
> + if (!cxl_ps_ctx)
> + return -ENOMEM;
> +
> + *cxl_ps_ctx = (struct cxl_patrol_scrub_context) {
> + .get_feat_size = feat_entry.get_feat_size,
> + .set_feat_size = feat_entry.set_feat_size,
> + .get_version = feat_entry.get_feat_ver,
> + .set_version = feat_entry.set_feat_ver,
> + .set_effects = feat_entry.set_effects,
> + .instance = scrub_inst++,
> + };
> + if (cxlr) {
> + snprintf(cxl_dev_name, sizeof(cxl_dev_name),
> + "cxl_region%d", cxlr->id);
> + cxl_ps_ctx->cxlr = cxlr;
> + } else {
> + snprintf(cxl_dev_name, sizeof(cxl_dev_name),
> + "%s_%s", "cxl", dev_name(&cxlmd->dev));
> + cxl_ps_ctx->cxlmd = cxlmd;
> + }
> +
> + ras_features[num_ras_features].ft_type = RAS_FEAT_SCRUB;
> + ras_features[num_ras_features].instance = cxl_ps_ctx->instance;
> + ras_features[num_ras_features].scrub_ops = &cxl_ps_scrub_ops;
> + ras_features[num_ras_features].ctx = cxl_ps_ctx;
> + num_ras_features++;
> +
> + return edac_dev_register(&cxlmd->dev, cxl_dev_name, NULL,
> + num_ras_features, ras_features);
> +}
> +EXPORT_SYMBOL_NS_GPL(cxl_mem_ras_features_init, CXL);
> diff --git a/drivers/cxl/core/region.c b/drivers/cxl/core/region.c
> index e701e4b04032..4292765606cd 100644
> --- a/drivers/cxl/core/region.c
> +++ b/drivers/cxl/core/region.c
> @@ -3443,6 +3443,12 @@ static int cxl_region_probe(struct device *dev)
> p->res->start, p->res->end, cxlr,
> is_system_ram) > 0)
> return 0;
> +
> + rc = cxl_mem_ras_features_init(NULL, cxlr);
> + if (rc)
> + dev_warn(&cxlr->dev, "CXL RAS features init for region_id=%d failed\n",
> + cxlr->id);
> +
> return devm_cxl_add_dax_region(cxlr);
> default:
> dev_dbg(&cxlr->dev, "unsupported region mode: %d\n",
> diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
> index fb356be8b426..9259c5d70a65 100644
> --- a/drivers/cxl/cxlmem.h
> +++ b/drivers/cxl/cxlmem.h
> @@ -933,6 +933,13 @@ int cxl_trigger_poison_list(struct cxl_memdev *cxlmd);
> int cxl_inject_poison(struct cxl_memdev *cxlmd, u64 dpa);
> int cxl_clear_poison(struct cxl_memdev *cxlmd, u64 dpa);
>
> +#if IS_ENABLED(CONFIG_CXL_RAS_FEAT)
> +int cxl_mem_ras_features_init(struct cxl_memdev *cxlmd, struct cxl_region *cxlr);
> +#else
> +static inline int cxl_mem_ras_features_init(struct cxl_memdev *cxlmd, struct cxl_region *cxlr)
> +{ return 0; }
> +#endif
> +
> #ifdef CONFIG_CXL_SUSPEND
> void cxl_mem_active_inc(void);
> void cxl_mem_active_dec(void);
> diff --git a/drivers/cxl/mem.c b/drivers/cxl/mem.c
> index a9fd5cd5a0d2..23ef99e02182 100644
> --- a/drivers/cxl/mem.c
> +++ b/drivers/cxl/mem.c
> @@ -116,6 +116,10 @@ static int cxl_mem_probe(struct device *dev)
> if (!cxlds->media_ready)
> return -EBUSY;
>
> + rc = cxl_mem_ras_features_init(cxlmd, NULL);
> + if (rc)
> + dev_warn(&cxlmd->dev, "CXL RAS features init failed\n");
> +
> /*
> * Someone is trying to reattach this device after it lost its port
> * connection (an endpoint port previously registered by this memdev was
^ permalink raw reply [flat|nested] 30+ messages in thread
* RE: [PATCH v14 07/14] cxl/memfeature: Add CXL memory device patrol scrub control feature
2024-10-29 16:31 ` Dave Jiang
@ 2024-10-29 17:00 ` Shiju Jose
2024-10-29 18:32 ` Dave Jiang
0 siblings, 1 reply; 30+ messages in thread
From: Shiju Jose @ 2024-10-29 17:00 UTC (permalink / raw)
To: Dave Jiang, linux-edac, linux-cxl, linux-acpi, linux-mm, linux-kernel
Cc: bp, tony.luck, rafael, lenb, mchehab, dan.j.williams, dave,
Jonathan Cameron, gregkh, sudeep.holla, jassisinghbrar,
alison.schofield, vishal.l.verma, ira.weiny, david,
Vilas.Sridharan, leo.duran, Yazen.Ghannam, rientjes, jiaqiyan,
Jon.Grimm, dave.hansen, naoya.horiguchi, james.morse, jthoughton,
somasundaram.a, erdemaktas, pgonda, duenwen, gthelen, wschwartz,
dferguson, wbs, nifan.cxl, tanxiaofei, Zengtao (B),
Roberto Sassu, kangkang.shen, wanghuiqiang, Linuxarm
>-----Original Message-----
>From: Dave Jiang <dave.jiang@intel.com>
>Sent: 29 October 2024 16:32
>To: Shiju Jose <shiju.jose@huawei.com>; linux-edac@vger.kernel.org; linux-
>cxl@vger.kernel.org; linux-acpi@vger.kernel.org; linux-mm@kvack.org; linux-
>kernel@vger.kernel.org
>Cc: bp@alien8.de; tony.luck@intel.com; rafael@kernel.org; lenb@kernel.org;
>mchehab@kernel.org; dan.j.williams@intel.com; dave@stgolabs.net; Jonathan
>Cameron <jonathan.cameron@huawei.com>; gregkh@linuxfoundation.org;
>sudeep.holla@arm.com; jassisinghbrar@gmail.com; alison.schofield@intel.com;
>vishal.l.verma@intel.com; ira.weiny@intel.com; david@redhat.com;
>Vilas.Sridharan@amd.com; leo.duran@amd.com; Yazen.Ghannam@amd.com;
>rientjes@google.com; jiaqiyan@google.com; Jon.Grimm@amd.com;
>dave.hansen@linux.intel.com; naoya.horiguchi@nec.com;
>james.morse@arm.com; jthoughton@google.com; somasundaram.a@hpe.com;
>erdemaktas@google.com; pgonda@google.com; duenwen@google.com;
>gthelen@google.com; wschwartz@amperecomputing.com;
>dferguson@amperecomputing.com; wbs@os.amperecomputing.com;
>nifan.cxl@gmail.com; tanxiaofei <tanxiaofei@huawei.com>; Zengtao (B)
><prime.zeng@hisilicon.com>; Roberto Sassu <roberto.sassu@huawei.com>;
>kangkang.shen@futurewei.com; wanghuiqiang <wanghuiqiang@huawei.com>;
>Linuxarm <linuxarm@huawei.com>
>Subject: Re: [PATCH v14 07/14] cxl/memfeature: Add CXL memory device patrol
>scrub control feature
>
>
>
>On 10/25/24 10:13 AM, shiju.jose@huawei.com wrote:
>> From: Shiju Jose <shiju.jose@huawei.com>
>>
>> CXL spec 3.1 section 8.2.9.9.11.1 describes the device patrol scrub
>> control feature. The device patrol scrub proactively locates and makes
>> corrections to errors in regular cycle.
>>
>> Allow specifying the number of hours within which the patrol scrub
>> must be completed, subject to minimum and maximum limits reported by the
>device.
>> Also allow disabling scrub allowing trade-off error rates against
>> performance.
>>
>> Add support for patrol scrub control on CXL memory devices.
>> Register with the EDAC device driver, which retrieves the scrub
>> attribute descriptors from EDAC scrub and exposes the sysfs scrub
>> control attributes to userspace. For example, scrub control for the
>> CXL memory device "cxl_mem0" is exposed in
>/sys/bus/edac/devices/cxl_mem0/scrubX/.
>>
>> Additionally, add support for region-based CXL memory patrol scrub control.
>> CXL memory regions may be interleaved across one or more CXL memory
>> devices. For example, region-based scrub control for "cxl_region1" is
>> exposed in /sys/bus/edac/devices/cxl_region1/scrubX/.
>>
>> Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
>> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
>> Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
>> ---
>> Documentation/edac/edac-scrub.rst | 74 ++++++
>> drivers/cxl/Kconfig | 18 ++
>> drivers/cxl/core/Makefile | 1 +
>> drivers/cxl/core/memfeature.c | 381 ++++++++++++++++++++++++++++++
>> drivers/cxl/core/region.c | 6 +
>> drivers/cxl/cxlmem.h | 7 +
>> drivers/cxl/mem.c | 4 +
>> 7 files changed, 491 insertions(+)
>> create mode 100644 Documentation/edac/edac-scrub.rst create mode
>> 100644 drivers/cxl/core/memfeature.c
>>
>> diff --git a/Documentation/edac/edac-scrub.rst
>> b/Documentation/edac/edac-scrub.rst
>> new file mode 100644
>> index 000000000000..4aad4974b208
>> --- /dev/null
>> +++ b/Documentation/edac/edac-scrub.rst
>> @@ -0,0 +1,74 @@
>> +.. SPDX-License-Identifier: GPL-2.0
>> +
[...]
>> +static int cxl_mem_ps_get_attrs(struct cxl_memdev_state *mds,
>> + struct cxl_memdev_ps_params *params) {
>> + size_t rd_data_size = sizeof(struct cxl_memdev_ps_rd_attrs);
>> + size_t data_size;
>> + struct cxl_memdev_ps_rd_attrs *rd_attrs __free(kfree) =
>> + kmalloc(rd_data_size,
>GFP_KERNEL);
>> + if (!rd_attrs)
>> + return -ENOMEM;
>> +
>> + data_size = cxl_get_feature(mds, cxl_patrol_scrub_uuid,
>> + CXL_GET_FEAT_SEL_CURRENT_VALUE,
>> + rd_attrs, rd_data_size);
>> + if (!data_size)
>> + return -EIO;
>> +
>> + params->scrub_cycle_changeable =
>FIELD_GET(CXL_MEMDEV_PS_SCRUB_CYCLE_CHANGE_CAP_MASK,
>> + rd_attrs->scrub_cycle_cap);
>> + params->enable =
>FIELD_GET(CXL_MEMDEV_PS_FLAG_ENABLED_MASK,
>> + rd_attrs->scrub_flags);
>> + params->scrub_cycle_hrs =
>FIELD_GET(CXL_MEMDEV_PS_CUR_SCRUB_CYCLE_MASK,
>> + rd_attrs->scrub_cycle_hrs);
>> + params->min_scrub_cycle_hrs =
>FIELD_GET(CXL_MEMDEV_PS_MIN_SCRUB_CYCLE_MASK,
>> + rd_attrs->scrub_cycle_hrs);
>> +
>> + return 0;
>> +}
>> +
>> +static int cxl_ps_get_attrs(struct device *dev, void *drv_data,
>
>Would a union be better than a void *drv_data for all the places this is used as a
>parameter? How many variations of this are there?
>
>DJ
Hi Dave,
Can you give more info on this given this is a generic callback for the scrub control and each
implementation will have its own context struct (for eg. struct cxl_patrol_scrub_context here
for CXL scrub control), which in turn will be passed in and out as opaque data.
Thanks,
Shiju
>
>> + struct cxl_memdev_ps_params *params) {
>> + struct cxl_patrol_scrub_context *cxl_ps_ctx = drv_data;
>> + struct cxl_memdev *cxlmd;
>> + struct cxl_dev_state *cxlds;
>> + struct cxl_memdev_state *mds;
>> + u16 min_scrub_cycle = 0;
>> + int i, ret;
>> +
>> + if (cxl_ps_ctx->cxlr) {
>> + struct cxl_region *cxlr = cxl_ps_ctx->cxlr;
>> + struct cxl_region_params *p = &cxlr->params;
>> +
>> + for (i = p->interleave_ways - 1; i >= 0; i--) {
>> + struct cxl_endpoint_decoder *cxled = p->targets[i];
>> +
>> + cxlmd = cxled_to_memdev(cxled);
>> + cxlds = cxlmd->cxlds;
>> + mds = to_cxl_memdev_state(cxlds);
>> + ret = cxl_mem_ps_get_attrs(mds, params);
>> + if (ret)
>> + return ret;
>> +
>> + if (params->min_scrub_cycle_hrs > min_scrub_cycle)
>> + min_scrub_cycle = params-
>>min_scrub_cycle_hrs;
>> + }
>> + params->min_scrub_cycle_hrs = min_scrub_cycle;
>> + return 0;
>> + }
>> + cxlmd = cxl_ps_ctx->cxlmd;
>> + cxlds = cxlmd->cxlds;
>> + mds = to_cxl_memdev_state(cxlds);
>> +
>> + return cxl_mem_ps_get_attrs(mds, params); }
>> +
[...]
>
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH v14 07/14] cxl/memfeature: Add CXL memory device patrol scrub control feature
2024-10-29 17:00 ` Shiju Jose
@ 2024-10-29 18:32 ` Dave Jiang
2024-10-30 16:16 ` Jonathan Cameron
0 siblings, 1 reply; 30+ messages in thread
From: Dave Jiang @ 2024-10-29 18:32 UTC (permalink / raw)
To: Shiju Jose, linux-edac, linux-cxl, linux-acpi, linux-mm, linux-kernel
Cc: bp, tony.luck, rafael, lenb, mchehab, dan.j.williams, dave,
Jonathan Cameron, gregkh, sudeep.holla, jassisinghbrar,
alison.schofield, vishal.l.verma, ira.weiny, david,
Vilas.Sridharan, leo.duran, Yazen.Ghannam, rientjes, jiaqiyan,
Jon.Grimm, dave.hansen, naoya.horiguchi, james.morse, jthoughton,
somasundaram.a, erdemaktas, pgonda, duenwen, gthelen, wschwartz,
dferguson, wbs, nifan.cxl, tanxiaofei, Zengtao (B),
Roberto Sassu, kangkang.shen, wanghuiqiang, Linuxarm
On 10/29/24 10:00 AM, Shiju Jose wrote:
>
>
>> -----Original Message-----
>> From: Dave Jiang <dave.jiang@intel.com>
>> Sent: 29 October 2024 16:32
>> To: Shiju Jose <shiju.jose@huawei.com>; linux-edac@vger.kernel.org; linux-
>> cxl@vger.kernel.org; linux-acpi@vger.kernel.org; linux-mm@kvack.org; linux-
>> kernel@vger.kernel.org
>> Cc: bp@alien8.de; tony.luck@intel.com; rafael@kernel.org; lenb@kernel.org;
>> mchehab@kernel.org; dan.j.williams@intel.com; dave@stgolabs.net; Jonathan
>> Cameron <jonathan.cameron@huawei.com>; gregkh@linuxfoundation.org;
>> sudeep.holla@arm.com; jassisinghbrar@gmail.com; alison.schofield@intel.com;
>> vishal.l.verma@intel.com; ira.weiny@intel.com; david@redhat.com;
>> Vilas.Sridharan@amd.com; leo.duran@amd.com; Yazen.Ghannam@amd.com;
>> rientjes@google.com; jiaqiyan@google.com; Jon.Grimm@amd.com;
>> dave.hansen@linux.intel.com; naoya.horiguchi@nec.com;
>> james.morse@arm.com; jthoughton@google.com; somasundaram.a@hpe.com;
>> erdemaktas@google.com; pgonda@google.com; duenwen@google.com;
>> gthelen@google.com; wschwartz@amperecomputing.com;
>> dferguson@amperecomputing.com; wbs@os.amperecomputing.com;
>> nifan.cxl@gmail.com; tanxiaofei <tanxiaofei@huawei.com>; Zengtao (B)
>> <prime.zeng@hisilicon.com>; Roberto Sassu <roberto.sassu@huawei.com>;
>> kangkang.shen@futurewei.com; wanghuiqiang <wanghuiqiang@huawei.com>;
>> Linuxarm <linuxarm@huawei.com>
>> Subject: Re: [PATCH v14 07/14] cxl/memfeature: Add CXL memory device patrol
>> scrub control feature
>>
>>
>>
>> On 10/25/24 10:13 AM, shiju.jose@huawei.com wrote:
>>> From: Shiju Jose <shiju.jose@huawei.com>
>>>
>>> CXL spec 3.1 section 8.2.9.9.11.1 describes the device patrol scrub
>>> control feature. The device patrol scrub proactively locates and makes
>>> corrections to errors in regular cycle.
>>>
>>> Allow specifying the number of hours within which the patrol scrub
>>> must be completed, subject to minimum and maximum limits reported by the
>> device.
>>> Also allow disabling scrub allowing trade-off error rates against
>>> performance.
>>>
>>> Add support for patrol scrub control on CXL memory devices.
>>> Register with the EDAC device driver, which retrieves the scrub
>>> attribute descriptors from EDAC scrub and exposes the sysfs scrub
>>> control attributes to userspace. For example, scrub control for the
>>> CXL memory device "cxl_mem0" is exposed in
>> /sys/bus/edac/devices/cxl_mem0/scrubX/.
>>>
>>> Additionally, add support for region-based CXL memory patrol scrub control.
>>> CXL memory regions may be interleaved across one or more CXL memory
>>> devices. For example, region-based scrub control for "cxl_region1" is
>>> exposed in /sys/bus/edac/devices/cxl_region1/scrubX/.
>>>
>>> Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
>>> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
>>> Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
>>> ---
>>> Documentation/edac/edac-scrub.rst | 74 ++++++
>>> drivers/cxl/Kconfig | 18 ++
>>> drivers/cxl/core/Makefile | 1 +
>>> drivers/cxl/core/memfeature.c | 381 ++++++++++++++++++++++++++++++
>>> drivers/cxl/core/region.c | 6 +
>>> drivers/cxl/cxlmem.h | 7 +
>>> drivers/cxl/mem.c | 4 +
>>> 7 files changed, 491 insertions(+)
>>> create mode 100644 Documentation/edac/edac-scrub.rst create mode
>>> 100644 drivers/cxl/core/memfeature.c
>>>
>>> diff --git a/Documentation/edac/edac-scrub.rst
>>> b/Documentation/edac/edac-scrub.rst
>>> new file mode 100644
>>> index 000000000000..4aad4974b208
>>> --- /dev/null
>>> +++ b/Documentation/edac/edac-scrub.rst
>>> @@ -0,0 +1,74 @@
>>> +.. SPDX-License-Identifier: GPL-2.0
>>> +
> [...]
>
>>> +static int cxl_mem_ps_get_attrs(struct cxl_memdev_state *mds,
>>> + struct cxl_memdev_ps_params *params) {
>>> + size_t rd_data_size = sizeof(struct cxl_memdev_ps_rd_attrs);
>>> + size_t data_size;
>>> + struct cxl_memdev_ps_rd_attrs *rd_attrs __free(kfree) =
>>> + kmalloc(rd_data_size,
>> GFP_KERNEL);
>>> + if (!rd_attrs)
>>> + return -ENOMEM;
>>> +
>>> + data_size = cxl_get_feature(mds, cxl_patrol_scrub_uuid,
>>> + CXL_GET_FEAT_SEL_CURRENT_VALUE,
>>> + rd_attrs, rd_data_size);
>>> + if (!data_size)
>>> + return -EIO;
>>> +
>>> + params->scrub_cycle_changeable =
>> FIELD_GET(CXL_MEMDEV_PS_SCRUB_CYCLE_CHANGE_CAP_MASK,
>>> + rd_attrs->scrub_cycle_cap);
>>> + params->enable =
>> FIELD_GET(CXL_MEMDEV_PS_FLAG_ENABLED_MASK,
>>> + rd_attrs->scrub_flags);
>>> + params->scrub_cycle_hrs =
>> FIELD_GET(CXL_MEMDEV_PS_CUR_SCRUB_CYCLE_MASK,
>>> + rd_attrs->scrub_cycle_hrs);
>>> + params->min_scrub_cycle_hrs =
>> FIELD_GET(CXL_MEMDEV_PS_MIN_SCRUB_CYCLE_MASK,
>>> + rd_attrs->scrub_cycle_hrs);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int cxl_ps_get_attrs(struct device *dev, void *drv_data,
>>
>> Would a union be better than a void *drv_data for all the places this is used as a
>> parameter? How many variations of this are there?
>>
>> DJ
> Hi Dave,
>
> Can you give more info on this given this is a generic callback for the scrub control and each
> implementation will have its own context struct (for eg. struct cxl_patrol_scrub_context here
> for CXL scrub control), which in turn will be passed in and out as opaque data.
Mainly I'm just seeing a lot of calls with (void *). Just asking if we want to make it a union that contains 'struct cxl_patrol_scrub_context' and etc.
>
> Thanks,
> Shiju
>>
>>> + struct cxl_memdev_ps_params *params) {
>>> + struct cxl_patrol_scrub_context *cxl_ps_ctx = drv_data;
>>> + struct cxl_memdev *cxlmd;
>>> + struct cxl_dev_state *cxlds;
>>> + struct cxl_memdev_state *mds;
>>> + u16 min_scrub_cycle = 0;
>>> + int i, ret;
>>> +
>>> + if (cxl_ps_ctx->cxlr) {
>>> + struct cxl_region *cxlr = cxl_ps_ctx->cxlr;
>>> + struct cxl_region_params *p = &cxlr->params;
>>> +
>>> + for (i = p->interleave_ways - 1; i >= 0; i--) {
>>> + struct cxl_endpoint_decoder *cxled = p->targets[i];
>>> +
>>> + cxlmd = cxled_to_memdev(cxled);
>>> + cxlds = cxlmd->cxlds;
>>> + mds = to_cxl_memdev_state(cxlds);
>>> + ret = cxl_mem_ps_get_attrs(mds, params);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + if (params->min_scrub_cycle_hrs > min_scrub_cycle)
>>> + min_scrub_cycle = params-
>>> min_scrub_cycle_hrs;
>>> + }
>>> + params->min_scrub_cycle_hrs = min_scrub_cycle;
>>> + return 0;
>>> + }
>>> + cxlmd = cxl_ps_ctx->cxlmd;
>>> + cxlds = cxlmd->cxlds;
>>> + mds = to_cxl_memdev_state(cxlds);
>>> +
>>> + return cxl_mem_ps_get_attrs(mds, params); }
>>> +
> [...]
>>
>
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH v14 03/14] EDAC: Add ECS control feature
2024-10-28 16:03 ` Shiju Jose
@ 2024-10-29 20:07 ` Borislav Petkov
0 siblings, 0 replies; 30+ messages in thread
From: Borislav Petkov @ 2024-10-29 20:07 UTC (permalink / raw)
To: Shiju Jose
Cc: linux-edac, linux-cxl, linux-acpi, linux-mm, linux-kernel,
tony.luck, rafael, lenb, mchehab, dan.j.williams, dave,
Jonathan Cameron, gregkh, sudeep.holla, jassisinghbrar,
dave.jiang, alison.schofield, vishal.l.verma, ira.weiny, david,
Vilas.Sridharan, leo.duran, Yazen.Ghannam, rientjes, jiaqiyan,
Jon.Grimm, dave.hansen, naoya.horiguchi, james.morse, jthoughton,
somasundaram.a, erdemaktas, pgonda, duenwen, gthelen, wschwartz,
dferguson, wbs, nifan.cxl, tanxiaofei, Zengtao (B),
Roberto Sassu, kangkang.shen, wanghuiqiang, Linuxarm
On Mon, Oct 28, 2024 at 04:03:31PM +0000, Shiju Jose wrote:
> I will update to 0 and 1.
Yes please. Just because some spec is written by hw people, doesn't mean we
should use this braindead format.
Thx.
--
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH v14 07/14] cxl/memfeature: Add CXL memory device patrol scrub control feature
2024-10-25 17:13 ` [PATCH v14 07/14] cxl/memfeature: Add CXL memory device patrol scrub control feature shiju.jose
2024-10-29 16:31 ` Dave Jiang
@ 2024-10-29 20:15 ` Borislav Petkov
2024-10-30 12:52 ` Shiju Jose
2024-10-29 20:16 ` Borislav Petkov
2 siblings, 1 reply; 30+ messages in thread
From: Borislav Petkov @ 2024-10-29 20:15 UTC (permalink / raw)
To: shiju.jose
Cc: linux-edac, linux-cxl, linux-acpi, linux-mm, linux-kernel,
tony.luck, rafael, lenb, mchehab, dan.j.williams, dave,
jonathan.cameron, gregkh, sudeep.holla, jassisinghbrar,
dave.jiang, alison.schofield, vishal.l.verma, ira.weiny, david,
Vilas.Sridharan, leo.duran, Yazen.Ghannam, rientjes, jiaqiyan,
Jon.Grimm, dave.hansen, naoya.horiguchi, james.morse, jthoughton,
somasundaram.a, erdemaktas, pgonda, duenwen, gthelen, wschwartz,
dferguson, wbs, nifan.cxl, tanxiaofei, prime.zeng, roberto.sassu,
kangkang.shen, wanghuiqiang, linuxarm
On Fri, Oct 25, 2024 at 06:13:48PM +0100, shiju.jose@huawei.com wrote:
> diff --git a/Documentation/edac/edac-scrub.rst b/Documentation/edac/edac-scrub.rst
> new file mode 100644
> index 000000000000..4aad4974b208
> --- /dev/null
> +++ b/Documentation/edac/edac-scrub.rst
> @@ -0,0 +1,74 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +===================
> +EDAC Scrub control
> +===================
> +
> +Copyright (c) 2024 HiSilicon Limited.
> +
> +:Author: Shiju Jose <shiju.jose@huawei.com>
> +:License: The GNU Free Documentation License, Version 1.2
> + (dual licensed under the GPL v2)
> +:Original Reviewers:
> +
> +- Written for: 6.13
> +- Updated for:
> +
> +Introduction
> +------------
> +The EDAC enhancement for RAS featurues exposes interfaces for controlling
> +the memory scrubbers in the system. The scrub device drivers in the
> +system register with the EDAC scrub. The driver exposes the
> +scrub controls to user in the sysfs.
> +
> +The File System
> +---------------
> +
> +The control attributes of the registered scrubber instance could be
> +accessed in the /sys/bus/edac/devices/<dev-name>/scrub*/
> +
> +sysfs
> +-----
> +
> +Sysfs files are documented in
> +`Documentation/ABI/testing/sysfs-edac-scrub-control`.
> +
> +Example
> +-------
> +
> +The usage takes the form shown in this example::
> +
> +1. CXL memory device patrol scrubber
> +1.1 device based
> +root@localhost:~# cat /sys/bus/edac/devices/cxl_mem0/scrub0/min_cycle_duration
> +3600
> +root@localhost:~# cat /sys/bus/edac/devices/cxl_mem0/scrub0/max_cycle_duration
> +918000
> +root@localhost:~# cat /sys/bus/edac/devices/cxl_mem0/scrub0/current_cycle_duration
> +43200
> +root@localhost:~# echo 54000 > /sys/bus/edac/devices/cxl_mem0/scrub0/current_cycle_duration
> +root@localhost:~# cat /sys/bus/edac/devices/cxl_mem0/scrub0/current_cycle_duration
> +54000
> +root@localhost:~# echo 1 > /sys/bus/edac/devices/cxl_mem0/scrub0/enable_background
> +root@localhost:~# cat /sys/bus/edac/devices/cxl_mem0/scrub0/enable_background
> +1
> +root@localhost:~# echo 0 > /sys/bus/edac/devices/cxl_mem0/scrub0/enable_background
> +root@localhost:~# cat /sys/bus/edac/devices/cxl_mem0/scrub0/enable_background
> +0
> +
> +1.2. region based
> +root@localhost:~# cat /sys/bus/edac/devices/cxl_region0/scrub0/min_cycle_duration
> +3600
> +root@localhost:~# cat /sys/bus/edac/devices/cxl_region0/scrub0/max_cycle_duration
> +918000
> +root@localhost:~# cat /sys/bus/edac/devices/cxl_region0/scrub0/current_cycle_duration
> +43200
> +root@localhost:~# echo 54000 > /sys/bus/edac/devices/cxl_region0/scrub0/current_cycle_duration
> +root@localhost:~# cat /sys/bus/edac/devices/cxl_region0/scrub0/current_cycle_duration
> +54000
> +root@localhost:~# echo 1 > /sys/bus/edac/devices/cxl_region0/scrub0/enable_background
> +root@localhost:~# cat /sys/bus/edac/devices/cxl_region0/scrub0/enable_background
> +1
> +root@localhost:~# echo 0 > /sys/bus/edac/devices/cxl_region0/scrub0/enable_background
> +root@localhost:~# cat /sys/bus/edac/devices/cxl_region0/scrub0/enable_background
> +0
This file's addition belongs to some EDAC patch in the series, not here.
It could be a separate, last patch in the series too, once everything is
settled.
Thx.
--
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH v14 07/14] cxl/memfeature: Add CXL memory device patrol scrub control feature
2024-10-25 17:13 ` [PATCH v14 07/14] cxl/memfeature: Add CXL memory device patrol scrub control feature shiju.jose
2024-10-29 16:31 ` Dave Jiang
2024-10-29 20:15 ` Borislav Petkov
@ 2024-10-29 20:16 ` Borislav Petkov
2024-10-30 11:26 ` Shiju Jose
2 siblings, 1 reply; 30+ messages in thread
From: Borislav Petkov @ 2024-10-29 20:16 UTC (permalink / raw)
To: shiju.jose
Cc: linux-edac, linux-cxl, linux-acpi, linux-mm, linux-kernel,
tony.luck, rafael, lenb, mchehab, dan.j.williams, dave,
jonathan.cameron, gregkh, sudeep.holla, jassisinghbrar,
dave.jiang, alison.schofield, vishal.l.verma, ira.weiny, david,
Vilas.Sridharan, leo.duran, Yazen.Ghannam, rientjes, jiaqiyan,
Jon.Grimm, dave.hansen, naoya.horiguchi, james.morse, jthoughton,
somasundaram.a, erdemaktas, pgonda, duenwen, gthelen, wschwartz,
dferguson, wbs, nifan.cxl, tanxiaofei, prime.zeng, roberto.sassu,
kangkang.shen, wanghuiqiang, linuxarm
On Fri, Oct 25, 2024 at 06:13:48PM +0100, shiju.jose@huawei.com wrote:
> +:Original Reviewers:
> +
> +- Written for: 6.13
> +- Updated for:
What are those supposed to mean?
--
Regards/Gruss,
Boris.
https://people.kernel.org/tglx/notes-about-netiquette
^ permalink raw reply [flat|nested] 30+ messages in thread
* RE: [PATCH v14 07/14] cxl/memfeature: Add CXL memory device patrol scrub control feature
2024-10-29 20:16 ` Borislav Petkov
@ 2024-10-30 11:26 ` Shiju Jose
0 siblings, 0 replies; 30+ messages in thread
From: Shiju Jose @ 2024-10-30 11:26 UTC (permalink / raw)
To: Borislav Petkov
Cc: linux-edac, linux-cxl, linux-acpi, linux-mm, linux-kernel,
tony.luck, rafael, lenb, mchehab, dan.j.williams, dave,
Jonathan Cameron, gregkh, sudeep.holla, jassisinghbrar,
dave.jiang, alison.schofield, vishal.l.verma, ira.weiny, david,
Vilas.Sridharan, leo.duran, Yazen.Ghannam, rientjes, jiaqiyan,
Jon.Grimm, dave.hansen, naoya.horiguchi, james.morse, jthoughton,
somasundaram.a, erdemaktas, pgonda, duenwen, gthelen, wschwartz,
dferguson, wbs, nifan.cxl, tanxiaofei, Zengtao (B),
Roberto Sassu, kangkang.shen, wanghuiqiang, Linuxarm
-----Original Message-----
>From: Borislav Petkov <bp@alien8.de>
>Sent: 29 October 2024 20:17
>To: Shiju Jose <shiju.jose@huawei.com>
>Cc: linux-edac@vger.kernel.org; linux-cxl@vger.kernel.org; linux-
>acpi@vger.kernel.org; linux-mm@kvack.org; linux-kernel@vger.kernel.org;
>tony.luck@intel.com; rafael@kernel.org; lenb@kernel.org;
>mchehab@kernel.org; dan.j.williams@intel.com; dave@stgolabs.net; Jonathan
>Cameron <jonathan.cameron@huawei.com>; gregkh@linuxfoundation.org;
>sudeep.holla@arm.com; jassisinghbrar@gmail.com; dave.jiang@intel.com;
>alison.schofield@intel.com; vishal.l.verma@intel.com; ira.weiny@intel.com;
>david@redhat.com; Vilas.Sridharan@amd.com; leo.duran@amd.com;
>Yazen.Ghannam@amd.com; rientjes@google.com; jiaqiyan@google.com;
>Jon.Grimm@amd.com; dave.hansen@linux.intel.com;
>naoya.horiguchi@nec.com; james.morse@arm.com; jthoughton@google.com;
>somasundaram.a@hpe.com; erdemaktas@google.com; pgonda@google.com;
>duenwen@google.com; gthelen@google.com;
>wschwartz@amperecomputing.com; dferguson@amperecomputing.com;
>wbs@os.amperecomputing.com; nifan.cxl@gmail.com; tanxiaofei
><tanxiaofei@huawei.com>; Zengtao (B) <prime.zeng@hisilicon.com>; Roberto
>Sassu <roberto.sassu@huawei.com>; kangkang.shen@futurewei.com;
>wanghuiqiang <wanghuiqiang@huawei.com>; Linuxarm
><linuxarm@huawei.com>
>Subject: Re: [PATCH v14 07/14] cxl/memfeature: Add CXL memory device patrol
>scrub control feature
>
>On Fri, Oct 25, 2024 at 06:13:48PM +0100, shiju.jose@huawei.com wrote:
>> +:Original Reviewers:
>> +
>> +- Written for: 6.13
>> +- Updated for:
>
>What are those supposed to mean?
I deleted.
>
>--
>Regards/Gruss,
> Boris.
Thanks,
Shiju
^ permalink raw reply [flat|nested] 30+ messages in thread
* RE: [PATCH v14 07/14] cxl/memfeature: Add CXL memory device patrol scrub control feature
2024-10-29 20:15 ` Borislav Petkov
@ 2024-10-30 12:52 ` Shiju Jose
0 siblings, 0 replies; 30+ messages in thread
From: Shiju Jose @ 2024-10-30 12:52 UTC (permalink / raw)
To: Borislav Petkov
Cc: linux-edac, linux-cxl, linux-acpi, linux-mm, linux-kernel,
tony.luck, rafael, lenb, mchehab, dan.j.williams, dave,
Jonathan Cameron, gregkh, sudeep.holla, jassisinghbrar,
dave.jiang, alison.schofield, vishal.l.verma, ira.weiny, david,
Vilas.Sridharan, leo.duran, Yazen.Ghannam, rientjes, jiaqiyan,
Jon.Grimm, dave.hansen, naoya.horiguchi, james.morse, jthoughton,
somasundaram.a, erdemaktas, pgonda, duenwen, gthelen, wschwartz,
dferguson, wbs, nifan.cxl, tanxiaofei, Zengtao (B),
Roberto Sassu, kangkang.shen, wanghuiqiang, Linuxarm
>-----Original Message-----
>From: Borislav Petkov <bp@alien8.de>
>Sent: 29 October 2024 20:15
>To: Shiju Jose <shiju.jose@huawei.com>
>Cc: linux-edac@vger.kernel.org; linux-cxl@vger.kernel.org; linux-
>acpi@vger.kernel.org; linux-mm@kvack.org; linux-kernel@vger.kernel.org;
>tony.luck@intel.com; rafael@kernel.org; lenb@kernel.org;
>mchehab@kernel.org; dan.j.williams@intel.com; dave@stgolabs.net; Jonathan
>Cameron <jonathan.cameron@huawei.com>; gregkh@linuxfoundation.org;
>sudeep.holla@arm.com; jassisinghbrar@gmail.com; dave.jiang@intel.com;
>alison.schofield@intel.com; vishal.l.verma@intel.com; ira.weiny@intel.com;
>david@redhat.com; Vilas.Sridharan@amd.com; leo.duran@amd.com;
>Yazen.Ghannam@amd.com; rientjes@google.com; jiaqiyan@google.com;
>Jon.Grimm@amd.com; dave.hansen@linux.intel.com;
>naoya.horiguchi@nec.com; james.morse@arm.com; jthoughton@google.com;
>somasundaram.a@hpe.com; erdemaktas@google.com; pgonda@google.com;
>duenwen@google.com; gthelen@google.com;
>wschwartz@amperecomputing.com; dferguson@amperecomputing.com;
>wbs@os.amperecomputing.com; nifan.cxl@gmail.com; tanxiaofei
><tanxiaofei@huawei.com>; Zengtao (B) <prime.zeng@hisilicon.com>; Roberto
>Sassu <roberto.sassu@huawei.com>; kangkang.shen@futurewei.com;
>wanghuiqiang <wanghuiqiang@huawei.com>; Linuxarm
><linuxarm@huawei.com>
>Subject: Re: [PATCH v14 07/14] cxl/memfeature: Add CXL memory device patrol
>scrub control feature
>
>On Fri, Oct 25, 2024 at 06:13:48PM +0100, shiju.jose@huawei.com wrote:
>> diff --git a/Documentation/edac/edac-scrub.rst
>> b/Documentation/edac/edac-scrub.rst
>> new file mode 100644
>> index 000000000000..4aad4974b208
>> --- /dev/null
>> +++ b/Documentation/edac/edac-scrub.rst
>> @@ -0,0 +1,74 @@
>> +.. SPDX-License-Identifier: GPL-2.0
>> +
[...]
>> +1
>> +root@localhost:~# echo 0 >
>> +/sys/bus/edac/devices/cxl_region0/scrub0/enable_background
>> +root@localhost:~# cat
>> +/sys/bus/edac/devices/cxl_region0/scrub0/enable_background
>> +0
>
>This file's addition belongs to some EDAC patch in the series, not here.
I will do.
>
>It could be a separate, last patch in the series too, once everything is settled.
>
>Thx.
>
>--
>Regards/Gruss,
> Boris.
Thanks,
Shiju
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH v14 07/14] cxl/memfeature: Add CXL memory device patrol scrub control feature
2024-10-29 18:32 ` Dave Jiang
@ 2024-10-30 16:16 ` Jonathan Cameron
2024-10-30 16:46 ` Dave Jiang
0 siblings, 1 reply; 30+ messages in thread
From: Jonathan Cameron @ 2024-10-30 16:16 UTC (permalink / raw)
To: Dave Jiang
Cc: Shiju Jose, linux-edac, linux-cxl, linux-acpi, linux-mm,
linux-kernel, bp, tony.luck, rafael, lenb, mchehab,
dan.j.williams, dave, gregkh, sudeep.holla, jassisinghbrar,
alison.schofield, vishal.l.verma, ira.weiny, david,
Vilas.Sridharan, leo.duran, Yazen.Ghannam, rientjes, jiaqiyan,
Jon.Grimm, dave.hansen, naoya.horiguchi, james.morse, jthoughton,
somasundaram.a, erdemaktas, pgonda, duenwen, gthelen, wschwartz,
dferguson, wbs, nifan.cxl, tanxiaofei, Zengtao (B),
Roberto Sassu, kangkang.shen, wanghuiqiang, Linuxarm
On Tue, 29 Oct 2024 11:32:47 -0700
Dave Jiang <dave.jiang@intel.com> wrote:
> On 10/29/24 10:00 AM, Shiju Jose wrote:
> >
> >
> >> -----Original Message-----
> >> From: Dave Jiang <dave.jiang@intel.com>
> >> Sent: 29 October 2024 16:32
> >> To: Shiju Jose <shiju.jose@huawei.com>; linux-edac@vger.kernel.org; linux-
> >> cxl@vger.kernel.org; linux-acpi@vger.kernel.org; linux-mm@kvack.org; linux-
> >> kernel@vger.kernel.org
> >> Cc: bp@alien8.de; tony.luck@intel.com; rafael@kernel.org; lenb@kernel.org;
> >> mchehab@kernel.org; dan.j.williams@intel.com; dave@stgolabs.net; Jonathan
> >> Cameron <jonathan.cameron@huawei.com>; gregkh@linuxfoundation.org;
> >> sudeep.holla@arm.com; jassisinghbrar@gmail.com; alison.schofield@intel.com;
> >> vishal.l.verma@intel.com; ira.weiny@intel.com; david@redhat.com;
> >> Vilas.Sridharan@amd.com; leo.duran@amd.com; Yazen.Ghannam@amd.com;
> >> rientjes@google.com; jiaqiyan@google.com; Jon.Grimm@amd.com;
> >> dave.hansen@linux.intel.com; naoya.horiguchi@nec.com;
> >> james.morse@arm.com; jthoughton@google.com; somasundaram.a@hpe.com;
> >> erdemaktas@google.com; pgonda@google.com; duenwen@google.com;
> >> gthelen@google.com; wschwartz@amperecomputing.com;
> >> dferguson@amperecomputing.com; wbs@os.amperecomputing.com;
> >> nifan.cxl@gmail.com; tanxiaofei <tanxiaofei@huawei.com>; Zengtao (B)
> >> <prime.zeng@hisilicon.com>; Roberto Sassu <roberto.sassu@huawei.com>;
> >> kangkang.shen@futurewei.com; wanghuiqiang <wanghuiqiang@huawei.com>;
> >> Linuxarm <linuxarm@huawei.com>
> >> Subject: Re: [PATCH v14 07/14] cxl/memfeature: Add CXL memory device patrol
> >> scrub control feature
> >>
> >>
> >>
> >> On 10/25/24 10:13 AM, shiju.jose@huawei.com wrote:
> >>> From: Shiju Jose <shiju.jose@huawei.com>
> >>>
> >>> CXL spec 3.1 section 8.2.9.9.11.1 describes the device patrol scrub
> >>> control feature. The device patrol scrub proactively locates and makes
> >>> corrections to errors in regular cycle.
> >>>
> >>> Allow specifying the number of hours within which the patrol scrub
> >>> must be completed, subject to minimum and maximum limits reported by the
> >> device.
> >>> Also allow disabling scrub allowing trade-off error rates against
> >>> performance.
> >>>
> >>> Add support for patrol scrub control on CXL memory devices.
> >>> Register with the EDAC device driver, which retrieves the scrub
> >>> attribute descriptors from EDAC scrub and exposes the sysfs scrub
> >>> control attributes to userspace. For example, scrub control for the
> >>> CXL memory device "cxl_mem0" is exposed in
> >> /sys/bus/edac/devices/cxl_mem0/scrubX/.
> >>>
> >>> Additionally, add support for region-based CXL memory patrol scrub control.
> >>> CXL memory regions may be interleaved across one or more CXL memory
> >>> devices. For example, region-based scrub control for "cxl_region1" is
> >>> exposed in /sys/bus/edac/devices/cxl_region1/scrubX/.
> >>>
> >>> Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> >>> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> >>> Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
> >>> ---
> >>> Documentation/edac/edac-scrub.rst | 74 ++++++
> >>> drivers/cxl/Kconfig | 18 ++
> >>> drivers/cxl/core/Makefile | 1 +
> >>> drivers/cxl/core/memfeature.c | 381 ++++++++++++++++++++++++++++++
> >>> drivers/cxl/core/region.c | 6 +
> >>> drivers/cxl/cxlmem.h | 7 +
> >>> drivers/cxl/mem.c | 4 +
> >>> 7 files changed, 491 insertions(+)
> >>> create mode 100644 Documentation/edac/edac-scrub.rst create mode
> >>> 100644 drivers/cxl/core/memfeature.c
> >>>
> >>> diff --git a/Documentation/edac/edac-scrub.rst
> >>> b/Documentation/edac/edac-scrub.rst
> >>> new file mode 100644
> >>> index 000000000000..4aad4974b208
> >>> --- /dev/null
> >>> +++ b/Documentation/edac/edac-scrub.rst
> >>> @@ -0,0 +1,74 @@
> >>> +.. SPDX-License-Identifier: GPL-2.0
> >>> +
> > [...]
> >
> >>> +static int cxl_mem_ps_get_attrs(struct cxl_memdev_state *mds,
> >>> + struct cxl_memdev_ps_params *params) {
> >>> + size_t rd_data_size = sizeof(struct cxl_memdev_ps_rd_attrs);
> >>> + size_t data_size;
> >>> + struct cxl_memdev_ps_rd_attrs *rd_attrs __free(kfree) =
> >>> + kmalloc(rd_data_size,
> >> GFP_KERNEL);
> >>> + if (!rd_attrs)
> >>> + return -ENOMEM;
> >>> +
> >>> + data_size = cxl_get_feature(mds, cxl_patrol_scrub_uuid,
> >>> + CXL_GET_FEAT_SEL_CURRENT_VALUE,
> >>> + rd_attrs, rd_data_size);
> >>> + if (!data_size)
> >>> + return -EIO;
> >>> +
> >>> + params->scrub_cycle_changeable =
> >> FIELD_GET(CXL_MEMDEV_PS_SCRUB_CYCLE_CHANGE_CAP_MASK,
> >>> + rd_attrs->scrub_cycle_cap);
> >>> + params->enable =
> >> FIELD_GET(CXL_MEMDEV_PS_FLAG_ENABLED_MASK,
> >>> + rd_attrs->scrub_flags);
> >>> + params->scrub_cycle_hrs =
> >> FIELD_GET(CXL_MEMDEV_PS_CUR_SCRUB_CYCLE_MASK,
> >>> + rd_attrs->scrub_cycle_hrs);
> >>> + params->min_scrub_cycle_hrs =
> >> FIELD_GET(CXL_MEMDEV_PS_MIN_SCRUB_CYCLE_MASK,
> >>> + rd_attrs->scrub_cycle_hrs);
> >>> +
> >>> + return 0;
> >>> +}
> >>> +
> >>> +static int cxl_ps_get_attrs(struct device *dev, void *drv_data,
> >>
> >> Would a union be better than a void *drv_data for all the places this is used as a
> >> parameter? How many variations of this are there?
> >>
> >> DJ
> > Hi Dave,
> >
> > Can you give more info on this given this is a generic callback for the scrub control and each
> > implementation will have its own context struct (for eg. struct cxl_patrol_scrub_context here
> > for CXL scrub control), which in turn will be passed in and out as opaque data.
>
> Mainly I'm just seeing a lot of calls with (void *). Just asking if we want to make it a union that contains 'struct cxl_patrol_scrub_context' and etc.
You could but then every new driver would need to include
changes in the edac core to add it's own entry to that union.
Not sure that's a good way to go for opaque driver specific context.
This particular function though can use
a struct cxl_patrol_scrub_context * anyway as it's not part of the
core interface, but rather one called only indirectly
by functions that are passed a void * but know it is a
struct clx_patrol_scrub_context *.
Jonathan
>
> >
> > Thanks,
> > Shiju
> >>
> >>> + struct cxl_memdev_ps_params *params) {
> >>> + struct cxl_patrol_scrub_context *cxl_ps_ctx = drv_data;
> >>> + struct cxl_memdev *cxlmd;
> >>> + struct cxl_dev_state *cxlds;
> >>> + struct cxl_memdev_state *mds;
> >>> + u16 min_scrub_cycle = 0;
> >>> + int i, ret;
> >>> +
> >>> + if (cxl_ps_ctx->cxlr) {
> >>> + struct cxl_region *cxlr = cxl_ps_ctx->cxlr;
> >>> + struct cxl_region_params *p = &cxlr->params;
> >>> +
> >>> + for (i = p->interleave_ways - 1; i >= 0; i--) {
> >>> + struct cxl_endpoint_decoder *cxled = p->targets[i];
> >>> +
> >>> + cxlmd = cxled_to_memdev(cxled);
> >>> + cxlds = cxlmd->cxlds;
> >>> + mds = to_cxl_memdev_state(cxlds);
> >>> + ret = cxl_mem_ps_get_attrs(mds, params);
> >>> + if (ret)
> >>> + return ret;
> >>> +
> >>> + if (params->min_scrub_cycle_hrs > min_scrub_cycle)
> >>> + min_scrub_cycle = params-
> >>> min_scrub_cycle_hrs;
> >>> + }
> >>> + params->min_scrub_cycle_hrs = min_scrub_cycle;
> >>> + return 0;
> >>> + }
> >>> + cxlmd = cxl_ps_ctx->cxlmd;
> >>> + cxlds = cxlmd->cxlds;
> >>> + mds = to_cxl_memdev_state(cxlds);
> >>> +
> >>> + return cxl_mem_ps_get_attrs(mds, params); }
> >>> +
> > [...]
> >>
> >
>
>
^ permalink raw reply [flat|nested] 30+ messages in thread
* Re: [PATCH v14 07/14] cxl/memfeature: Add CXL memory device patrol scrub control feature
2024-10-30 16:16 ` Jonathan Cameron
@ 2024-10-30 16:46 ` Dave Jiang
0 siblings, 0 replies; 30+ messages in thread
From: Dave Jiang @ 2024-10-30 16:46 UTC (permalink / raw)
To: Jonathan Cameron
Cc: Shiju Jose, linux-edac, linux-cxl, linux-acpi, linux-mm,
linux-kernel, bp, tony.luck, rafael, lenb, mchehab,
dan.j.williams, dave, gregkh, sudeep.holla, jassisinghbrar,
alison.schofield, vishal.l.verma, ira.weiny, david,
Vilas.Sridharan, leo.duran, Yazen.Ghannam, rientjes, jiaqiyan,
Jon.Grimm, dave.hansen, naoya.horiguchi, james.morse, jthoughton,
somasundaram.a, erdemaktas, pgonda, duenwen, gthelen, wschwartz,
dferguson, wbs, nifan.cxl, tanxiaofei, Zengtao (B),
Roberto Sassu, kangkang.shen, wanghuiqiang, Linuxarm
On 10/30/24 9:16 AM, Jonathan Cameron wrote:
> On Tue, 29 Oct 2024 11:32:47 -0700
> Dave Jiang <dave.jiang@intel.com> wrote:
>
>> On 10/29/24 10:00 AM, Shiju Jose wrote:
>>>
>>>
>>>> -----Original Message-----
>>>> From: Dave Jiang <dave.jiang@intel.com>
>>>> Sent: 29 October 2024 16:32
>>>> To: Shiju Jose <shiju.jose@huawei.com>; linux-edac@vger.kernel.org; linux-
>>>> cxl@vger.kernel.org; linux-acpi@vger.kernel.org; linux-mm@kvack.org; linux-
>>>> kernel@vger.kernel.org
>>>> Cc: bp@alien8.de; tony.luck@intel.com; rafael@kernel.org; lenb@kernel.org;
>>>> mchehab@kernel.org; dan.j.williams@intel.com; dave@stgolabs.net; Jonathan
>>>> Cameron <jonathan.cameron@huawei.com>; gregkh@linuxfoundation.org;
>>>> sudeep.holla@arm.com; jassisinghbrar@gmail.com; alison.schofield@intel.com;
>>>> vishal.l.verma@intel.com; ira.weiny@intel.com; david@redhat.com;
>>>> Vilas.Sridharan@amd.com; leo.duran@amd.com; Yazen.Ghannam@amd.com;
>>>> rientjes@google.com; jiaqiyan@google.com; Jon.Grimm@amd.com;
>>>> dave.hansen@linux.intel.com; naoya.horiguchi@nec.com;
>>>> james.morse@arm.com; jthoughton@google.com; somasundaram.a@hpe.com;
>>>> erdemaktas@google.com; pgonda@google.com; duenwen@google.com;
>>>> gthelen@google.com; wschwartz@amperecomputing.com;
>>>> dferguson@amperecomputing.com; wbs@os.amperecomputing.com;
>>>> nifan.cxl@gmail.com; tanxiaofei <tanxiaofei@huawei.com>; Zengtao (B)
>>>> <prime.zeng@hisilicon.com>; Roberto Sassu <roberto.sassu@huawei.com>;
>>>> kangkang.shen@futurewei.com; wanghuiqiang <wanghuiqiang@huawei.com>;
>>>> Linuxarm <linuxarm@huawei.com>
>>>> Subject: Re: [PATCH v14 07/14] cxl/memfeature: Add CXL memory device patrol
>>>> scrub control feature
>>>>
>>>>
>>>>
>>>> On 10/25/24 10:13 AM, shiju.jose@huawei.com wrote:
>>>>> From: Shiju Jose <shiju.jose@huawei.com>
>>>>>
>>>>> CXL spec 3.1 section 8.2.9.9.11.1 describes the device patrol scrub
>>>>> control feature. The device patrol scrub proactively locates and makes
>>>>> corrections to errors in regular cycle.
>>>>>
>>>>> Allow specifying the number of hours within which the patrol scrub
>>>>> must be completed, subject to minimum and maximum limits reported by the
>>>> device.
>>>>> Also allow disabling scrub allowing trade-off error rates against
>>>>> performance.
>>>>>
>>>>> Add support for patrol scrub control on CXL memory devices.
>>>>> Register with the EDAC device driver, which retrieves the scrub
>>>>> attribute descriptors from EDAC scrub and exposes the sysfs scrub
>>>>> control attributes to userspace. For example, scrub control for the
>>>>> CXL memory device "cxl_mem0" is exposed in
>>>> /sys/bus/edac/devices/cxl_mem0/scrubX/.
>>>>>
>>>>> Additionally, add support for region-based CXL memory patrol scrub control.
>>>>> CXL memory regions may be interleaved across one or more CXL memory
>>>>> devices. For example, region-based scrub control for "cxl_region1" is
>>>>> exposed in /sys/bus/edac/devices/cxl_region1/scrubX/.
>>>>>
>>>>> Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
>>>>> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
>>>>> Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
>>>>> ---
>>>>> Documentation/edac/edac-scrub.rst | 74 ++++++
>>>>> drivers/cxl/Kconfig | 18 ++
>>>>> drivers/cxl/core/Makefile | 1 +
>>>>> drivers/cxl/core/memfeature.c | 381 ++++++++++++++++++++++++++++++
>>>>> drivers/cxl/core/region.c | 6 +
>>>>> drivers/cxl/cxlmem.h | 7 +
>>>>> drivers/cxl/mem.c | 4 +
>>>>> 7 files changed, 491 insertions(+)
>>>>> create mode 100644 Documentation/edac/edac-scrub.rst create mode
>>>>> 100644 drivers/cxl/core/memfeature.c
>>>>>
>>>>> diff --git a/Documentation/edac/edac-scrub.rst
>>>>> b/Documentation/edac/edac-scrub.rst
>>>>> new file mode 100644
>>>>> index 000000000000..4aad4974b208
>>>>> --- /dev/null
>>>>> +++ b/Documentation/edac/edac-scrub.rst
>>>>> @@ -0,0 +1,74 @@
>>>>> +.. SPDX-License-Identifier: GPL-2.0
>>>>> +
>>> [...]
>>>
>>>>> +static int cxl_mem_ps_get_attrs(struct cxl_memdev_state *mds,
>>>>> + struct cxl_memdev_ps_params *params) {
>>>>> + size_t rd_data_size = sizeof(struct cxl_memdev_ps_rd_attrs);
>>>>> + size_t data_size;
>>>>> + struct cxl_memdev_ps_rd_attrs *rd_attrs __free(kfree) =
>>>>> + kmalloc(rd_data_size,
>>>> GFP_KERNEL);
>>>>> + if (!rd_attrs)
>>>>> + return -ENOMEM;
>>>>> +
>>>>> + data_size = cxl_get_feature(mds, cxl_patrol_scrub_uuid,
>>>>> + CXL_GET_FEAT_SEL_CURRENT_VALUE,
>>>>> + rd_attrs, rd_data_size);
>>>>> + if (!data_size)
>>>>> + return -EIO;
>>>>> +
>>>>> + params->scrub_cycle_changeable =
>>>> FIELD_GET(CXL_MEMDEV_PS_SCRUB_CYCLE_CHANGE_CAP_MASK,
>>>>> + rd_attrs->scrub_cycle_cap);
>>>>> + params->enable =
>>>> FIELD_GET(CXL_MEMDEV_PS_FLAG_ENABLED_MASK,
>>>>> + rd_attrs->scrub_flags);
>>>>> + params->scrub_cycle_hrs =
>>>> FIELD_GET(CXL_MEMDEV_PS_CUR_SCRUB_CYCLE_MASK,
>>>>> + rd_attrs->scrub_cycle_hrs);
>>>>> + params->min_scrub_cycle_hrs =
>>>> FIELD_GET(CXL_MEMDEV_PS_MIN_SCRUB_CYCLE_MASK,
>>>>> + rd_attrs->scrub_cycle_hrs);
>>>>> +
>>>>> + return 0;
>>>>> +}
>>>>> +
>>>>> +static int cxl_ps_get_attrs(struct device *dev, void *drv_data,
>>>>
>>>> Would a union be better than a void *drv_data for all the places this is used as a
>>>> parameter? How many variations of this are there?
>>>>
>>>> DJ
>>> Hi Dave,
>>>
>>> Can you give more info on this given this is a generic callback for the scrub control and each
>>> implementation will have its own context struct (for eg. struct cxl_patrol_scrub_context here
>>> for CXL scrub control), which in turn will be passed in and out as opaque data.
>>
>> Mainly I'm just seeing a lot of calls with (void *). Just asking if we want to make it a union that contains 'struct cxl_patrol_scrub_context' and etc.
>
> You could but then every new driver would need to include
> changes in the edac core to add it's own entry to that union.
>
> Not sure that's a good way to go for opaque driver specific context.
>
> This particular function though can use
> a struct cxl_patrol_scrub_context * anyway as it's not part of the
> core interface, but rather one called only indirectly
> by functions that are passed a void * but know it is a
> struct clx_patrol_scrub_context *.
Thanks Jonathan. That's basically what I wanted to know.
>
> Jonathan
>
>
>>
>>>
>>> Thanks,
>>> Shiju
>>>>
>>>>> + struct cxl_memdev_ps_params *params) {
>>>>> + struct cxl_patrol_scrub_context *cxl_ps_ctx = drv_data;
>>>>> + struct cxl_memdev *cxlmd;
>>>>> + struct cxl_dev_state *cxlds;
>>>>> + struct cxl_memdev_state *mds;
>>>>> + u16 min_scrub_cycle = 0;
>>>>> + int i, ret;
>>>>> +
>>>>> + if (cxl_ps_ctx->cxlr) {
>>>>> + struct cxl_region *cxlr = cxl_ps_ctx->cxlr;
>>>>> + struct cxl_region_params *p = &cxlr->params;
>>>>> +
>>>>> + for (i = p->interleave_ways - 1; i >= 0; i--) {
>>>>> + struct cxl_endpoint_decoder *cxled = p->targets[i];
>>>>> +
>>>>> + cxlmd = cxled_to_memdev(cxled);
>>>>> + cxlds = cxlmd->cxlds;
>>>>> + mds = to_cxl_memdev_state(cxlds);
>>>>> + ret = cxl_mem_ps_get_attrs(mds, params);
>>>>> + if (ret)
>>>>> + return ret;
>>>>> +
>>>>> + if (params->min_scrub_cycle_hrs > min_scrub_cycle)
>>>>> + min_scrub_cycle = params-
>>>>> min_scrub_cycle_hrs;
>>>>> + }
>>>>> + params->min_scrub_cycle_hrs = min_scrub_cycle;
>>>>> + return 0;
>>>>> + }
>>>>> + cxlmd = cxl_ps_ctx->cxlmd;
>>>>> + cxlds = cxlmd->cxlds;
>>>>> + mds = to_cxl_memdev_state(cxlds);
>>>>> +
>>>>> + return cxl_mem_ps_get_attrs(mds, params); }
>>>>> +
>>> [...]
>>>>
>>>
>>
>>
>
>
^ permalink raw reply [flat|nested] 30+ messages in thread
end of thread, other threads:[~2024-10-30 16:46 UTC | newest]
Thread overview: 30+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-10-25 17:13 [PATCH v14 00/14] EDAC: Scrub: introduce generic EDAC RAS control feature driver + CXL/ACPI-RAS2 drivers shiju.jose
2024-10-25 17:13 ` [PATCH v14 01/14] EDAC: Add support for EDAC device features control shiju.jose
2024-10-25 17:13 ` [PATCH v14 02/14] EDAC: Add scrub control feature shiju.jose
2024-10-25 17:13 ` [PATCH v14 03/14] EDAC: Add ECS " shiju.jose
2024-10-28 11:16 ` Borislav Petkov
2024-10-28 16:03 ` Shiju Jose
2024-10-29 20:07 ` Borislav Petkov
2024-10-25 17:13 ` [PATCH v14 04/14] cxl: Add Get Supported Features command for kernel usage shiju.jose
2024-10-25 17:13 ` [PATCH v14 05/14] cxl/mbox: Add GET_FEATURE mailbox command shiju.jose
2024-10-29 15:47 ` Dave Jiang
2024-10-25 17:13 ` [PATCH v14 06/14] cxl/mbox: Add SET_FEATURE " shiju.jose
2024-10-29 15:51 ` Dave Jiang
2024-10-25 17:13 ` [PATCH v14 07/14] cxl/memfeature: Add CXL memory device patrol scrub control feature shiju.jose
2024-10-29 16:31 ` Dave Jiang
2024-10-29 17:00 ` Shiju Jose
2024-10-29 18:32 ` Dave Jiang
2024-10-30 16:16 ` Jonathan Cameron
2024-10-30 16:46 ` Dave Jiang
2024-10-29 20:15 ` Borislav Petkov
2024-10-30 12:52 ` Shiju Jose
2024-10-29 20:16 ` Borislav Petkov
2024-10-30 11:26 ` Shiju Jose
2024-10-25 17:13 ` [PATCH v14 08/14] cxl/memfeature: Add CXL memory device ECS " shiju.jose
2024-10-25 17:13 ` [PATCH v14 09/14] ACPI:RAS2: Add ACPI RAS2 driver shiju.jose
2024-10-25 17:13 ` [PATCH v14 10/14] ras: mem: Add memory " shiju.jose
2024-10-25 17:13 ` [PATCH v14 11/14] EDAC: Add memory repair control feature shiju.jose
2024-10-25 17:13 ` [PATCH v14 12/14] cxl/mbox: Add support for PERFORM_MAINTENANCE mailbox command shiju.jose
2024-10-25 17:13 ` [PATCH v14 13/14] cxl/memfeature: Add CXL memory device sPPR control feature shiju.jose
2024-10-25 17:13 ` [PATCH v14 14/14] cxl/memfeature: Add CXL memory device memory sparing " shiju.jose
2024-10-26 10:35 ` [PATCH v14 00/14] EDAC: Scrub: introduce generic EDAC RAS control feature driver + CXL/ACPI-RAS2 drivers Borislav Petkov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox