linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Lorenzo Stoakes <lstoakes@gmail.com>
To: "Joel Fernandes (Google)" <joel@joelfernandes.org>
Cc: linux-kernel@vger.kernel.org, linux-kselftest@vger.kernel.org,
	linux-mm@kvack.org, Shuah Khan <shuah@kernel.org>,
	Vlastimil Babka <vbabka@suse.cz>, Michal Hocko <mhocko@suse.com>,
	Linus Torvalds <torvalds@linux-foundation.org>,
	Kirill A Shutemov <kirill@shutemov.name>,
	"Liam R. Howlett" <liam.howlett@oracle.com>,
	"Paul E. McKenney" <paulmck@kernel.org>,
	Suren Baghdasaryan <surenb@google.com>,
	Kalesh Singh <kaleshsingh@google.com>,
	Lokesh Gidra <lokeshgidra@google.com>
Subject: Re: [PATCH v6 6/7] selftests: mm: Add a test for remapping within a range
Date: Tue, 5 Sep 2023 07:48:56 +0100	[thread overview]
Message-ID: <2bc8a939-5d98-4129-9cc7-ff6c8aa8493e@lucifer.local> (raw)
In-Reply-To: <20230903151328.2981432-7-joel@joelfernandes.org>

On Sun, Sep 03, 2023 at 03:13:27PM +0000, Joel Fernandes (Google) wrote:
> Move a block of memory within a memory range. Any alignment optimization
> on the source address may cause corruption. Verify using kselftest that
> it works. I have also verified with tracing that such optimization does
> not happen due to this check in can_align_down():
>
> if (!for_stack && vma->vm_start != addr_to_align)
> 	return false;
>
> Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
> ---
>  tools/testing/selftests/mm/mremap_test.c | 79 +++++++++++++++++++++++-
>  1 file changed, 78 insertions(+), 1 deletion(-)
>
> diff --git a/tools/testing/selftests/mm/mremap_test.c b/tools/testing/selftests/mm/mremap_test.c
> index d7366074e2a8..12a095457f4c 100644
> --- a/tools/testing/selftests/mm/mremap_test.c
> +++ b/tools/testing/selftests/mm/mremap_test.c
> @@ -23,6 +23,7 @@
>  #define VALIDATION_NO_THRESHOLD 0	/* Verify the entire region */
>
>  #define MIN(X, Y) ((X) < (Y) ? (X) : (Y))
> +#define SIZE_MB(m) ((size_t)m * (1024 * 1024))
>
>  struct config {
>  	unsigned long long src_alignment;
> @@ -226,6 +227,79 @@ static void mremap_expand_merge_offset(FILE *maps_fp, unsigned long page_size)
>  		ksft_test_result_fail("%s\n", test_name);
>  }
>
> +/*
> + * Verify that an mremap within a range does not cause corruption
> + * of unrelated part of range.
> + *
> + * Consider the following range which is 2MB aligned and is
> + * a part of a larger 20MB range which is not shown. Each
> + * character is 256KB below making the source and destination
> + * 2MB each. The lower case letters are moved (s to d) and the
> + * upper case letters are not moved. The below test verifies
> + * that the upper case S letters are not corrupted by the
> + * adjacent mremap.
> + *
> + * |DDDDddddSSSSssss|
> + */
> +static void mremap_move_within_range(char pattern_seed)
> +{
> +	char *test_name = "mremap mremap move within range";
> +	void *src, *dest;
> +	int i, success = 1;
> +
> +	size_t size = SIZE_MB(20);
> +	void *ptr = mmap(NULL, size, PROT_READ | PROT_WRITE,
> +			 MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
> +	if (ptr == MAP_FAILED) {
> +		perror("mmap");
> +		success = 0;
> +		goto out;
> +	}
> +	memset(ptr, 0, size);
> +
> +	src = ptr + SIZE_MB(6);
> +	src = (void *)((unsigned long)src & ~(SIZE_MB(2) - 1));
> +
> +	/* Set byte pattern for source block. */
> +	srand(pattern_seed);
> +	for (i = 0; i < SIZE_MB(2); i++) {
> +		((char *)src)[i] = (char) rand();
> +	}
> +
> +	dest = src - SIZE_MB(2);
> +
> +	void *new_ptr = mremap(src + SIZE_MB(1), SIZE_MB(1), SIZE_MB(1),
> +						   MREMAP_MAYMOVE | MREMAP_FIXED, dest + SIZE_MB(1));
> +	if (new_ptr == MAP_FAILED) {
> +		perror("mremap");
> +		success = 0;
> +		goto out;
> +	}
> +
> +	/* Verify byte pattern after remapping */
> +	srand(pattern_seed);
> +	for (i = 0; i < SIZE_MB(1); i++) {
> +		char c = (char) rand();
> +
> +		if (((char *)src)[i] != c) {
> +			ksft_print_msg("Data at src at %d got corrupted due to unrelated mremap\n",
> +				       i);
> +			ksft_print_msg("Expected: %#x\t Got: %#x\n", c & 0xff,
> +					((char *) src)[i] & 0xff);
> +			success = 0;
> +		}
> +	}
> +
> +out:
> +	if (munmap(ptr, size) == -1)
> +		perror("munmap");
> +
> +	if (success)
> +		ksft_test_result_pass("%s\n", test_name);
> +	else
> +		ksft_test_result_fail("%s\n", test_name);
> +}
> +
>  /*
>   * Returns the start address of the mapping on success, else returns
>   * NULL on failure.
> @@ -491,6 +565,7 @@ int main(int argc, char **argv)
>  	unsigned int threshold_mb = VALIDATION_DEFAULT_THRESHOLD;
>  	unsigned int pattern_seed;
>  	int num_expand_tests = 2;
> +	int num_misc_tests = 1;
>  	struct test test_cases[MAX_TEST] = {};
>  	struct test perf_test_cases[MAX_PERF_TEST];
>  	int page_size;
> @@ -572,7 +647,7 @@ int main(int argc, char **argv)
>  				(threshold_mb * _1MB >= _1GB);
>
>  	ksft_set_plan(ARRAY_SIZE(test_cases) + (run_perf_tests ?
> -		      ARRAY_SIZE(perf_test_cases) : 0) + num_expand_tests);
> +		      ARRAY_SIZE(perf_test_cases) : 0) + num_expand_tests + num_misc_tests);
>
>  	for (i = 0; i < ARRAY_SIZE(test_cases); i++)
>  		run_mremap_test_case(test_cases[i], &failures, threshold_mb,
> @@ -590,6 +665,8 @@ int main(int argc, char **argv)
>
>  	fclose(maps_fp);
>
> +	mremap_move_within_range(pattern_seed);
> +
>  	if (run_perf_tests) {
>  		ksft_print_msg("\n%s\n",
>  		 "mremap HAVE_MOVE_PMD/PUD optimization time comparison for 1GB region:");
> --
> 2.42.0.283.g2d96d420d3-goog
>

Looks good to me, nice series in general!

Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>


  reply	other threads:[~2023-09-05  6:49 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-09-03 15:13 [PATCH v6 0/7] Optimize mremap during mutual alignment within PMD Joel Fernandes (Google)
2023-09-03 15:13 ` [PATCH v6 1/7] mm/mremap: Optimize the start addresses in move_page_tables() Joel Fernandes (Google)
2023-09-08 13:07   ` Michal Hocko
2023-09-08 13:26     ` Joel Fernandes
2023-09-03 15:13 ` [PATCH v6 2/7] mm/mremap: Allow moves within the same VMA for stack moves Joel Fernandes (Google)
2023-09-05  6:47   ` Lorenzo Stoakes
2023-09-08 13:11   ` Michal Hocko
2023-09-03 15:13 ` [PATCH v6 3/7] selftests: mm: Fix failure case when new remap region was not found Joel Fernandes (Google)
2023-09-03 15:13 ` [PATCH v6 4/7] selftests: mm: Add a test for mutually aligned moves > PMD size Joel Fernandes (Google)
2023-09-03 15:13 ` [PATCH v6 5/7] selftests: mm: Add a test for remapping to area immediately after existing mapping Joel Fernandes (Google)
2023-09-03 15:13 ` [PATCH v6 6/7] selftests: mm: Add a test for remapping within a range Joel Fernandes (Google)
2023-09-05  6:48   ` Lorenzo Stoakes [this message]
2023-09-03 15:13 ` [PATCH v6 7/7] selftests: mm: Add a test for moving from an offset from start of mapping Joel Fernandes (Google)
2023-09-18 15:35 ` [PATCH v6 0/7] Optimize mremap during mutual alignment within PMD zhenyu zhang
2023-09-19 12:31   ` zhenyu zhang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2bc8a939-5d98-4129-9cc7-ff6c8aa8493e@lucifer.local \
    --to=lstoakes@gmail.com \
    --cc=joel@joelfernandes.org \
    --cc=kaleshsingh@google.com \
    --cc=kirill@shutemov.name \
    --cc=liam.howlett@oracle.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-kselftest@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=lokeshgidra@google.com \
    --cc=mhocko@suse.com \
    --cc=paulmck@kernel.org \
    --cc=shuah@kernel.org \
    --cc=surenb@google.com \
    --cc=torvalds@linux-foundation.org \
    --cc=vbabka@suse.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox