[patch 10/38] arcnet: Remove function timing code

[Thomas Gleixner <tglx@kernel.org>]

ARCNET is a museums piece and the function timing can be done with
ftrace. Remove the cruft.

Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: Michael Grzeschik <m.grzeschik@pengutronix.de>
Cc: netdev@vger.kernel.org
---
 drivers/net/arcnet/arc-rimi.c  |    4 ++--
 drivers/net/arcnet/arcdevice.h |   20 +-------------------
 drivers/net/arcnet/com20020.c  |    6 ++----
 drivers/net/arcnet/com90io.c   |    6 ++----
 drivers/net/arcnet/com90xx.c   |    4 ++--
 5 files changed, 9 insertions(+), 31 deletions(-)

--- a/drivers/net/arcnet/arc-rimi.c
+++ b/drivers/net/arcnet/arc-rimi.c
@@ -291,7 +291,7 @@ static void arcrimi_copy_to_card(struct
 	struct arcnet_local *lp = netdev_priv(dev);
 	void __iomem *memaddr = lp->mem_start + 0x800 + bufnum * 512 + offset;
 
-	TIME(dev, "memcpy_toio", count, memcpy_toio(memaddr, buf, count));
+	memcpy_toio(memaddr, buf, count);
 }
 
 static void arcrimi_copy_from_card(struct net_device *dev, int bufnum,
@@ -300,7 +300,7 @@ static void arcrimi_copy_from_card(struc
 	struct arcnet_local *lp = netdev_priv(dev);
 	void __iomem *memaddr = lp->mem_start + 0x800 + bufnum * 512 + offset;
 
-	TIME(dev, "memcpy_fromio", count, memcpy_fromio(buf, memaddr, count));
+	memcpy_fromio(buf, memaddr, count);
 }
 
 static int node;
--- a/drivers/net/arcnet/arcdevice.h
+++ b/drivers/net/arcnet/arcdevice.h
@@ -11,7 +11,6 @@
 #ifndef _LINUX_ARCDEVICE_H
 #define _LINUX_ARCDEVICE_H
 
-#include <asm/timex.h>
 #include <linux/if_arcnet.h>
 
 #ifdef __KERNEL__
@@ -62,7 +61,7 @@
 #define D_RX		512	/* show rx packets                        */
 #define D_SKB		1024	/* show skb's                             */
 #define D_SKB_SIZE	2048	/* show skb sizes			  */
-#define D_TIMING	4096	/* show time needed to copy buffers to card */
+#define D_TIMING	4096	/* Not longer supported. Use tracing instead */
 #define D_DEBUG         8192    /* Very detailed debug line for line */
 
 #ifndef ARCNET_DEBUG_MAX
@@ -95,23 +94,6 @@ do {									\
 		pr_cont(fmt, ##__VA_ARGS__);				\
 } while (0)
 
-/* see how long a function call takes to run, expressed in CPU cycles */
-#define TIME(dev, name, bytes, call)					\
-do {									\
-	if (BUGLVL(D_TIMING)) {						\
-		unsigned long _x, _y;					\
-		_x = get_cycles();					\
-		call;							\
-		_y = get_cycles();					\
-		arc_printk(D_TIMING, dev,				\
-			   "%s: %d bytes in %lu cycles == %lu Kbytes/100Mcycle\n", \
-			   name, bytes, _y - _x,			\
-			   100000000 / 1024 * bytes / (_y - _x + 1));	\
-	} else {							\
-		call;							\
-	}								\
-} while (0)
-
 /*
  * Time needed to reset the card - in ms (milliseconds).  This works on my
  * SMC PC100.  I can't find a reference that tells me just how long I
--- a/drivers/net/arcnet/com20020.c
+++ b/drivers/net/arcnet/com20020.c
@@ -70,8 +70,7 @@ static void com20020_copy_from_card(stru
 	arcnet_outb(ofs & 0xff, ioaddr, COM20020_REG_W_ADDR_LO);
 
 	/* copy the data */
-	TIME(dev, "insb", count,
-	     arcnet_insb(ioaddr, COM20020_REG_RW_MEMDATA, buf, count));
+	arcnet_insb(ioaddr, COM20020_REG_RW_MEMDATA, buf, count);
 }
 
 static void com20020_copy_to_card(struct net_device *dev, int bufnum,
@@ -84,8 +83,7 @@ static void com20020_copy_to_card(struct
 	arcnet_outb(ofs & 0xff, ioaddr, COM20020_REG_W_ADDR_LO);
 
 	/* copy the data */
-	TIME(dev, "outsb", count,
-	     arcnet_outsb(ioaddr, COM20020_REG_RW_MEMDATA, buf, count));
+	arcnet_outsb(ioaddr, COM20020_REG_RW_MEMDATA, buf, count);
 }
 
 /* Reset the card and check some basic stuff during the detection stage. */
--- a/drivers/net/arcnet/com90io.c
+++ b/drivers/net/arcnet/com90io.c
@@ -332,15 +332,13 @@ static void com90io_setmask(struct net_d
 static void com90io_copy_to_card(struct net_device *dev, int bufnum,
 				 int offset, void *buf, int count)
 {
-	TIME(dev, "put_whole_buffer", count,
-	     put_whole_buffer(dev, bufnum * 512 + offset, count, buf));
+	put_whole_buffer(dev, bufnum * 512 + offset, count, buf);
 }
 
 static void com90io_copy_from_card(struct net_device *dev, int bufnum,
 				   int offset, void *buf, int count)
 {
-	TIME(dev, "get_whole_buffer", count,
-	     get_whole_buffer(dev, bufnum * 512 + offset, count, buf));
+	get_whole_buffer(dev, bufnum * 512 + offset, count, buf);
 }
 
 static int io;			/* use the insmod io= irq= shmem= options */
--- a/drivers/net/arcnet/com90xx.c
+++ b/drivers/net/arcnet/com90xx.c
@@ -633,7 +633,7 @@ static void com90xx_copy_to_card(struct
 	struct arcnet_local *lp = netdev_priv(dev);
 	void __iomem *memaddr = lp->mem_start + bufnum * 512 + offset;
 
-	TIME(dev, "memcpy_toio", count, memcpy_toio(memaddr, buf, count));
+	memcpy_toio(memaddr, buf, count);
 }
 
 static void com90xx_copy_from_card(struct net_device *dev, int bufnum,
@@ -642,7 +642,7 @@ static void com90xx_copy_from_card(struc
 	struct arcnet_local *lp = netdev_priv(dev);
 	void __iomem *memaddr = lp->mem_start + bufnum * 512 + offset;
 
-	TIME(dev, "memcpy_fromio", count, memcpy_fromio(buf, memaddr, count));
+	memcpy_fromio(buf, memaddr, count);
 }
 
 MODULE_DESCRIPTION("ARCnet COM90xx normal chipset driver");