[PATCH v2 07/10] arm64: tegra: Add VPR placeholder node on Tegra234

[Thierry Reding <thierry.reding@kernel.org>]

From: Thierry Reding <treding@nvidia.com>

This node contains two sets of properties, one for the case where the
VPR is resizable (in which case the VPR region will be dynamically
allocated at boot time) and another case where the VPR is fixed in size
and initialized by early firmware.

The firmware running on the device is responsible for updating the node
with the real physical address for the fixed VPR case and remove the
properties needed only for resizable VPR. Similarly, if the VPR is
resizable, the firmware should remove the "reg" property since it is no
longer needed.

Signed-off-by: Thierry Reding <treding@nvidia.com>
---
 arch/arm64/boot/dts/nvidia/tegra234.dtsi | 34 ++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
index 850c473235e3..62a5dfde9e38 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
@@ -29,6 +29,40 @@ aliases {
 		i2c8 = &dp_aux_ch3_i2c;
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		vpr: video-protection-region@0 {
+			compatible = "nvidia,tegra-video-protection-region";
+			status = "disabled";
+			no-map;
+
+			/*
+			 * Two variants exist for this. For fixed VPR, the
+			 * firmware is supposed to update the "reg" property
+			 * with the fixed memory region configured as VPR.
+			 *
+			 * For resizable VPR we don't care about the exact
+			 * address and instead want a reserved region to be
+			 * allocated with a certain size and alignment at
+			 * boot time.
+			 *
+			 * The firmware is responsible for removing the
+			 * unused set of properties.
+			 */
+
+			/* fixed VPR */
+			reg = <0x0 0x0 0x0 0x0>;
+
+			/* resizable VPR */
+			size = <0x0 0x70000000>;
+			alignment = <0x0 0x100000>;
+			reusable;
+		};
+	};
+
 	bus@0 {
 		compatible = "simple-bus";
 
-- 
2.52.0