linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Mahmoud Adam <mngyadam@amazon.de>
To: <stable@vger.kernel.org>
Cc: <gregkh@linuxfoundation.org>, <nagy@khwaternagy.com>,
	"Darrick J. Wong" <djwong@kernel.org>,
	Christoph Hellwig <hch@lst.de>,
	Luis Chamberlain <mcgrof@kernel.org>,
	Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>,
	"Jens Axboe" <axboe@kernel.dk>, Xiubo Li <xiubli@redhat.com>,
	Ilya Dryomov <idryomov@gmail.com>,
	Jeff Layton <jlayton@kernel.org>,
	Alexander Viro <viro@zeniv.linux.org.uk>,
	Theodore Ts'o <tytso@mit.edu>,
	Andreas Dilger <adilger.kernel@dilger.ca>,
	Jaegeuk Kim <jaegeuk@kernel.org>, Chao Yu <chao@kernel.org>,
	Christoph Hellwig <hch@infradead.org>,
	Trond Myklebust <trond.myklebust@hammerspace.com>,
	Anna Schumaker <anna@kernel.org>,
	"Ryusuke Konishi" <konishi.ryusuke@gmail.com>,
	"Matthew Wilcox (Oracle)" <willy@infradead.org>,
	Andrew Morton <akpm@linux-foundation.org>,
	"Hannes Reinecke" <hare@suse.de>,
	Damien Le Moal <dlemoal@kernel.org>,
	<linux-block@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<ceph-devel@vger.kernel.org>, <linux-fsdevel@vger.kernel.org>,
	<linux-ext4@vger.kernel.org>,
	<linux-f2fs-devel@lists.sourceforge.net>,
	<linux-xfs@vger.kernel.org>, <linux-nfs@vger.kernel.org>,
	<linux-nilfs@vger.kernel.org>, <linux-mm@kvack.org>
Subject: [PATCH 6.1 7/8] block: fix race between set_blocksize and read paths
Date: Tue, 21 Oct 2025 09:03:42 +0200	[thread overview]
Message-ID: <20251021070353.96705-9-mngyadam@amazon.de> (raw)
In-Reply-To: <20251021070353.96705-2-mngyadam@amazon.de>

From: "Darrick J. Wong" <djwong@kernel.org>

commit c0e473a0d226479e8e925d5ba93f751d8df628e9 upstream.

With the new large sector size support, it's now the case that
set_blocksize can change i_blksize and the folio order in a manner that
conflicts with a concurrent reader and causes a kernel crash.

Specifically, let's say that udev-worker calls libblkid to detect the
labels on a block device.  The read call can create an order-0 folio to
read the first 4096 bytes from the disk.  But then udev is preempted.

Next, someone tries to mount an 8k-sectorsize filesystem from the same
block device.  The filesystem calls set_blksize, which sets i_blksize to
8192 and the minimum folio order to 1.

Now udev resumes, still holding the order-0 folio it allocated.  It then
tries to schedule a read bio and do_mpage_readahead tries to create
bufferheads for the folio.  Unfortunately, blocks_per_folio == 0 because
the page size is 4096 but the blocksize is 8192 so no bufferheads are
attached and the bh walk never sets bdev.  We then submit the bio with a
NULL block device and crash.

Therefore, truncate the page cache after flushing but before updating
i_blksize.  However, that's not enough -- we also need to lock out file
IO and page faults during the update.  Take both the i_rwsem and the
invalidate_lock in exclusive mode for invalidations, and in shared mode
for read/write operations.

I don't know if this is the correct fix, but xfs/259 found it.

Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/174543795699.4139148.2086129139322431423.stgit@frogsfrogsfrogs
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[use bdev->bd_inode instead & fix small contextual changes]
Signed-off-by: Mahmoud Adam <mngyadam@amazon.de>
---
 block/bdev.c      | 17 +++++++++++++++++
 block/blk-zoned.c |  5 ++++-
 block/fops.c      | 16 ++++++++++++++++
 block/ioctl.c     |  6 ++++++
 4 files changed, 43 insertions(+), 1 deletion(-)

diff --git a/block/bdev.c b/block/bdev.c
index b61502ec8da06c..5a631a0ca46a81 100644
--- a/block/bdev.c
+++ b/block/bdev.c
@@ -147,9 +147,26 @@ int set_blocksize(struct block_device *bdev, int size)
 
 	/* Don't change the size if it is same as current */
 	if (bdev->bd_inode->i_blkbits != blksize_bits(size)) {
+		/*
+		 * Flush and truncate the pagecache before we reconfigure the
+		 * mapping geometry because folio sizes are variable now.  If a
+		 * reader has already allocated a folio whose size is smaller
+		 * than the new min_order but invokes readahead after the new
+		 * min_order becomes visible, readahead will think there are
+		 * "zero" blocks per folio and crash.  Take the inode and
+		 * invalidation locks to avoid racing with
+		 * read/write/fallocate.
+		 */
+		inode_lock(bdev->bd_inode);
+		filemap_invalidate_lock(bdev->bd_inode->i_mapping);
+
 		sync_blockdev(bdev);
+		kill_bdev(bdev);
+
 		bdev->bd_inode->i_blkbits = blksize_bits(size);
 		kill_bdev(bdev);
+		filemap_invalidate_unlock(bdev->bd_inode->i_mapping);
+		inode_unlock(bdev->bd_inode);
 	}
 	return 0;
 }
diff --git a/block/blk-zoned.c b/block/blk-zoned.c
index db829401d8d0ca..ef72612ca4645f 100644
--- a/block/blk-zoned.c
+++ b/block/blk-zoned.c
@@ -417,6 +417,7 @@ int blkdev_zone_mgmt_ioctl(struct block_device *bdev, fmode_t mode,
 		op = REQ_OP_ZONE_RESET;
 
 		/* Invalidate the page cache, including dirty pages. */
+		inode_lock(bdev->bd_inode);
 		filemap_invalidate_lock(bdev->bd_inode->i_mapping);
 		ret = blkdev_truncate_zone_range(bdev, mode, &zrange);
 		if (ret)
@@ -439,8 +440,10 @@ int blkdev_zone_mgmt_ioctl(struct block_device *bdev, fmode_t mode,
 			       GFP_KERNEL);
 
 fail:
-	if (cmd == BLKRESETZONE)
+	if (cmd == BLKRESETZONE) {
 		filemap_invalidate_unlock(bdev->bd_inode->i_mapping);
+		inode_unlock(bdev->bd_inode);
+	}
 
 	return ret;
 }
diff --git a/block/fops.c b/block/fops.c
index fb7a57ed42d995..2fc6ac6679ee63 100644
--- a/block/fops.c
+++ b/block/fops.c
@@ -592,7 +592,14 @@ static ssize_t blkdev_write_iter(struct kiocb *iocb, struct iov_iter *from)
 			ret = direct_write_fallback(iocb, from, ret,
 					generic_perform_write(iocb, from));
 	} else {
+		/*
+		 * Take i_rwsem and invalidate_lock to avoid racing with
+		 * set_blocksize changing i_blkbits/folio order and punching
+		 * out the pagecache.
+		 */
+		inode_lock_shared(bd_inode);
 		ret = generic_perform_write(iocb, from);
+		inode_unlock_shared(bd_inode);
 	}
 
 	if (ret > 0)
@@ -605,6 +612,7 @@ static ssize_t blkdev_write_iter(struct kiocb *iocb, struct iov_iter *from)
 static ssize_t blkdev_read_iter(struct kiocb *iocb, struct iov_iter *to)
 {
 	struct block_device *bdev = iocb->ki_filp->private_data;
+	struct inode *bd_inode = bdev->bd_inode;
 	loff_t size = bdev_nr_bytes(bdev);
 	loff_t pos = iocb->ki_pos;
 	size_t shorted = 0;
@@ -652,7 +660,13 @@ static ssize_t blkdev_read_iter(struct kiocb *iocb, struct iov_iter *to)
 			goto reexpand;
 	}
 
+	/*
+	 * Take i_rwsem and invalidate_lock to avoid racing with set_blocksize
+	 * changing i_blkbits/folio order and punching out the pagecache.
+	 */
+	inode_lock_shared(bd_inode);
 	ret = filemap_read(iocb, to, ret);
+	inode_unlock_shared(bd_inode);
 
 reexpand:
 	if (unlikely(shorted))
@@ -695,6 +709,7 @@ static long blkdev_fallocate(struct file *file, int mode, loff_t start,
 	if ((start | len) & (bdev_logical_block_size(bdev) - 1))
 		return -EINVAL;
 
+	inode_lock(inode);
 	filemap_invalidate_lock(inode->i_mapping);
 
 	/*
@@ -735,6 +750,7 @@ static long blkdev_fallocate(struct file *file, int mode, loff_t start,
 
  fail:
 	filemap_invalidate_unlock(inode->i_mapping);
+	inode_unlock(inode);
 	return error;
 }
 
diff --git a/block/ioctl.c b/block/ioctl.c
index 552da0ccbec09e..b37bbe9b3487d8 100644
--- a/block/ioctl.c
+++ b/block/ioctl.c
@@ -114,6 +114,7 @@ static int blk_ioctl_discard(struct block_device *bdev, fmode_t mode,
 	    end > bdev_nr_bytes(bdev))
 		return -EINVAL;
 
+	inode_lock(inode);
 	filemap_invalidate_lock(inode->i_mapping);
 	err = truncate_bdev_range(bdev, mode, start, end - 1);
 	if (err)
@@ -121,6 +122,7 @@ static int blk_ioctl_discard(struct block_device *bdev, fmode_t mode,
 	err = blkdev_issue_discard(bdev, start >> 9, len >> 9, GFP_KERNEL);
 fail:
 	filemap_invalidate_unlock(inode->i_mapping);
+	inode_unlock(inode);
 	return err;
 }
 
@@ -146,12 +148,14 @@ static int blk_ioctl_secure_erase(struct block_device *bdev, fmode_t mode,
 	    end > bdev_nr_bytes(bdev))
 		return -EINVAL;
 
+	inode_lock(bdev->bd_inode);
 	filemap_invalidate_lock(bdev->bd_inode->i_mapping);
 	err = truncate_bdev_range(bdev, mode, start, end - 1);
 	if (!err)
 		err = blkdev_issue_secure_erase(bdev, start >> 9, len >> 9,
 						GFP_KERNEL);
 	filemap_invalidate_unlock(bdev->bd_inode->i_mapping);
+	inode_unlock(bdev->bd_inode);
 	return err;
 }
 
@@ -184,6 +188,7 @@ static int blk_ioctl_zeroout(struct block_device *bdev, fmode_t mode,
 		return -EINVAL;
 
 	/* Invalidate the page cache, including dirty pages */
+	inode_lock(inode);
 	filemap_invalidate_lock(inode->i_mapping);
 	err = truncate_bdev_range(bdev, mode, start, end);
 	if (err)
@@ -194,6 +199,7 @@ static int blk_ioctl_zeroout(struct block_device *bdev, fmode_t mode,
 
 fail:
 	filemap_invalidate_unlock(inode->i_mapping);
+	inode_unlock(inode);
 	return err;
 }
 
-- 
2.47.3




Amazon Web Services Development Center Germany GmbH
Tamara-Danz-Str. 13
10243 Berlin
Geschaeftsfuehrung: Christian Schlaeger
Eingetragen am Amtsgericht Charlottenburg unter HRB 257764 B
Sitz: Berlin
Ust-ID: DE 365 538 597



  parent reply	other threads:[~2025-10-21  7:12 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-10-21  7:03 [PATCH 6.1 0/8] Backporting CVE-2025-38073 fix patch Mahmoud Adam
2025-10-21  7:03 ` [PATCH 6.1 1/8] filemap: add a kiocb_invalidate_pages helper Mahmoud Adam
2025-11-03  1:46   ` Patch "filemap: add a kiocb_invalidate_pages helper" has been added to the 6.1-stable tree gregkh
2025-10-21  7:03 ` [PATCH 6.1 2/8] filemap: add a kiocb_invalidate_post_direct_write helper Mahmoud Adam
2025-11-03  1:46   ` Patch "filemap: add a kiocb_invalidate_post_direct_write helper" has been added to the 6.1-stable tree gregkh
2025-10-21  7:03 ` [PATCH 6.1 3/8] filemap: update ki_pos in generic_perform_write Mahmoud Adam
2025-11-03  1:46   ` Patch "filemap: update ki_pos in generic_perform_write" has been added to the 6.1-stable tree gregkh
2025-10-21  7:03 ` [PATCH 6.1 4/8] fs: factor out a direct_write_fallback helper Mahmoud Adam
2025-11-03  1:46   ` Patch "fs: factor out a direct_write_fallback helper" has been added to the 6.1-stable tree gregkh
2025-10-21  7:03 ` [PATCH 6.1 5/8] direct_write_fallback(): on error revert the ->ki_pos update from buffered write Mahmoud Adam
2025-10-21  7:03 ` [PATCH 6.1 6/8] block: open code __generic_file_write_iter for blkdev writes Mahmoud Adam
2025-11-03  1:46   ` Patch "block: open code __generic_file_write_iter for blkdev writes" has been added to the 6.1-stable tree gregkh
2025-10-21  7:03 ` Mahmoud Adam [this message]
2025-11-03  1:46   ` Patch "block: fix race between set_blocksize and read paths" " gregkh
2025-10-21  7:03 ` [PATCH 6.1 8/8] nilfs2: fix deadlock warnings caused by lock dependency in init_nilfs() Mahmoud Adam
2025-11-03  1:46   ` Patch "nilfs2: fix deadlock warnings caused by lock dependency in init_nilfs()" has been added to the 6.1-stable tree gregkh
2025-10-21  7:16 ` [PATCH 6.1 0/8] Backporting CVE-2025-38073 fix patch Greg KH
2025-10-21  7:25   ` Mahmoud Nagy Adam
2025-10-21  7:43     ` Greg KH
2025-10-21 10:16       ` Mahmoud Nagy Adam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251021070353.96705-9-mngyadam@amazon.de \
    --to=mngyadam@amazon.de \
    --cc=adilger.kernel@dilger.ca \
    --cc=akpm@linux-foundation.org \
    --cc=anna@kernel.org \
    --cc=axboe@kernel.dk \
    --cc=ceph-devel@vger.kernel.org \
    --cc=chao@kernel.org \
    --cc=djwong@kernel.org \
    --cc=dlemoal@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=hare@suse.de \
    --cc=hch@infradead.org \
    --cc=hch@lst.de \
    --cc=idryomov@gmail.com \
    --cc=jaegeuk@kernel.org \
    --cc=jlayton@kernel.org \
    --cc=konishi.ryusuke@gmail.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-ext4@vger.kernel.org \
    --cc=linux-f2fs-devel@lists.sourceforge.net \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linux-nfs@vger.kernel.org \
    --cc=linux-nilfs@vger.kernel.org \
    --cc=linux-xfs@vger.kernel.org \
    --cc=mcgrof@kernel.org \
    --cc=nagy@khwaternagy.com \
    --cc=shinichiro.kawasaki@wdc.com \
    --cc=stable@vger.kernel.org \
    --cc=trond.myklebust@hammerspace.com \
    --cc=tytso@mit.edu \
    --cc=viro@zeniv.linux.org.uk \
    --cc=willy@infradead.org \
    --cc=xiubli@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox