On Wed, Oct 08, 2025 at 06:57:53PM -0700, Samuel Holland wrote: > JH7100 provides a physical memory region which is a noncached alias of > normal cacheable DRAM. Now that Linux can apply PMAs by selecting > between aliases of a physical memory region, any page of DRAM can be > marked as noncached for use with DMA, and the preallocated DMA pool is > no longer needed. This allows portable kernels to boot on JH7100 boards. > > Signed-off-by: Samuel Holland > --- > > Changes in v2: > - Move the JH7100 DT changes from jh7100-common.dtsi to jh7100.dtsi > - Keep RISCV_DMA_NONCOHERENT and RISCV_NONSTANDARD_CACHE_OPS selected > > arch/riscv/Kconfig.errata | 19 --------------- > arch/riscv/Kconfig.socs | 2 ++ > .../boot/dts/starfive/jh7100-common.dtsi | 24 ------------------- > arch/riscv/boot/dts/starfive/jh7100.dtsi | 4 ++++ > 4 files changed, 6 insertions(+), 43 deletions(-) > > diff --git a/arch/riscv/Kconfig.errata b/arch/riscv/Kconfig.errata > index e318119d570de..62700631a5c5d 100644 > --- a/arch/riscv/Kconfig.errata > +++ b/arch/riscv/Kconfig.errata > @@ -53,25 +53,6 @@ config ERRATA_SIFIVE_CIP_1200 > > If you don't know what to do here, say "Y". > > -config ERRATA_STARFIVE_JH7100 > - bool "StarFive JH7100 support" > - depends on ARCH_STARFIVE > - depends on !DMA_DIRECT_REMAP > - depends on NONPORTABLE > - select DMA_GLOBAL_POOL > - select RISCV_DMA_NONCOHERENT > - select RISCV_NONSTANDARD_CACHE_OPS > - select SIFIVE_CCACHE > - default n > - help > - The StarFive JH7100 was a test chip for the JH7110 and has > - caches that are non-coherent with respect to peripheral DMAs. > - It was designed before the Zicbom extension so needs non-standard > - cache operations through the SiFive cache controller. > - > - Say "Y" if you want to support the BeagleV Starlight and/or > - StarFive VisionFive V1 boards. Hmm, removing this is going to break old devicetrees, right? Shouldn't we just keep this with a wording change stating that it has been replaced, rather than removing it right away? Cheers, Conor. > - > config ERRATA_THEAD > bool "T-HEAD errata" > depends on RISCV_ALTERNATIVE > diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs > index 848e7149e4435..a8950206fb750 100644 > --- a/arch/riscv/Kconfig.socs > +++ b/arch/riscv/Kconfig.socs > @@ -50,6 +50,8 @@ config SOC_STARFIVE > bool "StarFive SoCs" > select PINCTRL > select RESET_CONTROLLER > + select RISCV_DMA_NONCOHERENT > + select RISCV_NONSTANDARD_CACHE_OPS > select ARM_AMBA > help > This enables support for StarFive SoC platform hardware. > diff --git a/arch/riscv/boot/dts/starfive/jh7100-common.dtsi b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi > index ae1a6aeb0aeaa..47d0cf55bfc02 100644 > --- a/arch/riscv/boot/dts/starfive/jh7100-common.dtsi > +++ b/arch/riscv/boot/dts/starfive/jh7100-common.dtsi > @@ -42,30 +42,6 @@ led-ack { > }; > }; > > - reserved-memory { > - #address-cells = <2>; > - #size-cells = <2>; > - ranges; > - > - dma-reserved@fa000000 { > - reg = <0x0 0xfa000000 0x0 0x1000000>; > - no-map; > - }; > - > - linux,dma@107a000000 { > - compatible = "shared-dma-pool"; > - reg = <0x10 0x7a000000 0x0 0x1000000>; > - no-map; > - linux,dma-default; > - }; > - }; > - > - soc { > - dma-ranges = <0x00 0x80000000 0x00 0x80000000 0x00 0x7a000000>, > - <0x00 0xfa000000 0x10 0x7a000000 0x00 0x01000000>, > - <0x00 0xfb000000 0x00 0xfb000000 0x07 0x85000000>; > - }; > - > wifi_pwrseq: wifi-pwrseq { > compatible = "mmc-pwrseq-simple"; > reset-gpios = <&gpio 37 GPIO_ACTIVE_LOW>; > diff --git a/arch/riscv/boot/dts/starfive/jh7100.dtsi b/arch/riscv/boot/dts/starfive/jh7100.dtsi > index 7de0732b8eabe..34ff65d65ac7e 100644 > --- a/arch/riscv/boot/dts/starfive/jh7100.dtsi > +++ b/arch/riscv/boot/dts/starfive/jh7100.dtsi > @@ -7,11 +7,15 @@ > /dts-v1/; > #include > #include > +#include > > / { > compatible = "starfive,jh7100"; > #address-cells = <2>; > #size-cells = <2>; > + riscv,physical-memory-regions = > + <0x00 0x80000000 0x08 0x00000000 (PMA_RWXA | PMA_NONCOHERENT_MEMORY) 0x0>, > + <0x10 0x00000000 0x08 0x00000000 (PMA_RWX | PMA_NONCACHEABLE_MEMORY | PMR_ALIAS(1)) 0x0>; > > cpus: cpus { > #address-cells = <1>; > -- > 2.47.2 >