From: Sergey Senozhatsky <senozhatsky@chromium.org>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Yosry Ahmed <yosry.ahmed@linux.dev>,
Hillf Danton <hdanton@sina.com>, Kairui Song <ryncsn@gmail.com>,
Sebastian Andrzej Siewior <bigeasy@linutronix.de>,
Minchan Kim <minchan@kernel.org>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org,
Sergey Senozhatsky <senozhatsky@chromium.org>
Subject: [PATCH v8 09/17] zram: rework recompression loop
Date: Sat, 22 Feb 2025 07:25:40 +0900 [thread overview]
Message-ID: <20250221222958.2225035-10-senozhatsky@chromium.org> (raw)
In-Reply-To: <20250221222958.2225035-1-senozhatsky@chromium.org>
This reworks recompression loop handling:
- set a rule that stream-put NULLs the stream pointer
If the loop returns with a non-NULL stream then it's a
successfull recompression, otherwise the stream should
always be NULL.
- do not count the number of recompressions
Mark object as incompressible as soon as the algorithm
with the highest priority failed to compress that object.
- count compression errors as resource usage
Even if compression has failed, we still need to bump
num_recomp_pages counter.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
---
drivers/block/zram/zram_drv.c | 53 +++++++++++++----------------------
1 file changed, 19 insertions(+), 34 deletions(-)
diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c
index 92908495c904..b96be8576cbc 100644
--- a/drivers/block/zram/zram_drv.c
+++ b/drivers/block/zram/zram_drv.c
@@ -1892,9 +1892,8 @@ static int recompress_slot(struct zram *zram, u32 index, struct page *page,
unsigned int comp_len_new;
unsigned int class_index_old;
unsigned int class_index_new;
- u32 num_recomps = 0;
void *src, *dst;
- int ret;
+ int ret = 0;
handle_old = zram_get_handle(zram, index);
if (!handle_old)
@@ -1937,7 +1936,6 @@ static int recompress_slot(struct zram *zram, u32 index, struct page *page,
if (!zram->comps[prio])
continue;
- num_recomps++;
zstrm = zcomp_stream_get(zram->comps[prio]);
src = kmap_local_page(page);
ret = zcomp_compress(zram->comps[prio], zstrm,
@@ -1946,7 +1944,8 @@ static int recompress_slot(struct zram *zram, u32 index, struct page *page,
if (ret) {
zcomp_stream_put(zstrm);
- return ret;
+ zstrm = NULL;
+ break;
}
class_index_new = zs_lookup_class_index(zram->mem_pool,
@@ -1956,6 +1955,7 @@ static int recompress_slot(struct zram *zram, u32 index, struct page *page,
if (class_index_new >= class_index_old ||
(threshold && comp_len_new >= threshold)) {
zcomp_stream_put(zstrm);
+ zstrm = NULL;
continue;
}
@@ -1963,14 +1963,6 @@ static int recompress_slot(struct zram *zram, u32 index, struct page *page,
break;
}
- /*
- * We did not try to recompress, e.g. when we have only one
- * secondary algorithm and the page is already recompressed
- * using that algorithm
- */
- if (!zstrm)
- return 0;
-
/*
* Decrement the limit (if set) on pages we can recompress, even
* when current recompression was unsuccessful or did not compress
@@ -1980,38 +1972,31 @@ static int recompress_slot(struct zram *zram, u32 index, struct page *page,
if (*num_recomp_pages)
*num_recomp_pages -= 1;
- if (class_index_new >= class_index_old) {
+ /* Compression error */
+ if (ret)
+ return ret;
+
+ if (!zstrm) {
/*
* Secondary algorithms failed to re-compress the page
- * in a way that would save memory, mark the object as
- * incompressible so that we will not try to compress
- * it again.
+ * in a way that would save memory.
*
- * We need to make sure that all secondary algorithms have
- * failed, so we test if the number of recompressions matches
- * the number of active secondary algorithms.
+ * Mark the object incompressible if the max-priority
+ * algorithm couldn't re-compress it.
*/
- if (num_recomps == zram->num_active_comps - 1)
- zram_set_flag(zram, index, ZRAM_INCOMPRESSIBLE);
+ if (prio < zram->num_active_comps)
+ return 0;
+ zram_set_flag(zram, index, ZRAM_INCOMPRESSIBLE);
return 0;
}
- /* Successful recompression but above threshold */
- if (threshold && comp_len_new >= threshold)
- return 0;
-
/*
- * No direct reclaim (slow path) for handle allocation and no
- * re-compression attempt (unlike in zram_write_bvec()) since
- * we already have stored that object in zsmalloc. If we cannot
- * alloc memory for recompressed object then we bail out and
- * simply keep the old (existing) object in zsmalloc.
+ * We are holding per-CPU stream mutex and entry lock so better
+ * avoid direct reclaim. Allocation error is not fatal since
+ * we still have the old object in the mem_pool.
*/
handle_new = zs_malloc(zram->mem_pool, comp_len_new,
- __GFP_KSWAPD_RECLAIM |
- __GFP_NOWARN |
- __GFP_HIGHMEM |
- __GFP_MOVABLE);
+ GFP_NOWAIT | __GFP_HIGHMEM | __GFP_MOVABLE);
if (IS_ERR_VALUE(handle_new)) {
zcomp_stream_put(zstrm);
return PTR_ERR((void *)handle_new);
--
2.48.1.601.g30ceb7b040-goog
next prev parent reply other threads:[~2025-02-21 22:31 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-21 22:25 [PATCH v8 00/17] zsmalloc/zram: there be preemption Sergey Senozhatsky
2025-02-21 22:25 ` [PATCH v8 01/17] zram: sleepable entry locking Sergey Senozhatsky
2025-02-24 8:19 ` Sebastian Andrzej Siewior
2025-02-25 4:51 ` Sergey Senozhatsky
2025-02-27 12:05 ` Sebastian Andrzej Siewior
2025-02-27 12:42 ` Sergey Senozhatsky
2025-02-27 13:04 ` Sergey Senozhatsky
2025-02-27 13:12 ` Sebastian Andrzej Siewior
2025-02-27 13:20 ` Sergey Senozhatsky
2025-02-21 22:25 ` [PATCH v8 02/17] zram: permit preemption with active compression stream Sergey Senozhatsky
2025-02-21 22:25 ` [PATCH v8 03/17] zram: remove unused crypto include Sergey Senozhatsky
2025-02-21 22:25 ` [PATCH v8 04/17] zram: remove max_comp_streams device attr Sergey Senozhatsky
2025-02-21 22:25 ` [PATCH v8 05/17] zram: remove second stage of handle allocation Sergey Senozhatsky
2025-02-21 22:25 ` [PATCH v8 06/17] zram: remove writestall zram_stats member Sergey Senozhatsky
2025-02-21 22:25 ` [PATCH v8 07/17] zram: limit max recompress prio to num_active_comps Sergey Senozhatsky
2025-02-21 22:25 ` [PATCH v8 08/17] zram: filter out recomp targets based on priority Sergey Senozhatsky
2025-02-21 22:25 ` Sergey Senozhatsky [this message]
2025-02-21 22:25 ` [PATCH v8 10/17] zsmalloc: rename pool lock Sergey Senozhatsky
2025-02-21 22:25 ` [PATCH v8 11/17] zsmalloc: make zspage lock preemptible Sergey Senozhatsky
2025-02-24 8:59 ` Sebastian Andrzej Siewior
2025-02-25 4:28 ` Sergey Senozhatsky
2025-02-21 22:25 ` [PATCH v8 12/17] zsmalloc: introduce new object mapping API Sergey Senozhatsky
2025-02-24 9:01 ` Sebastian Andrzej Siewior
2025-02-25 4:29 ` Sergey Senozhatsky
2025-02-21 22:25 ` [PATCH v8 13/17] zram: switch to new zsmalloc " Sergey Senozhatsky
2025-02-21 22:25 ` [PATCH v8 14/17] zram: permit reclaim in zstd custom allocator Sergey Senozhatsky
2025-02-24 9:10 ` Sebastian Andrzej Siewior
2025-02-25 4:42 ` Sergey Senozhatsky
2025-02-26 3:01 ` Sergey Senozhatsky
2025-02-27 13:19 ` Sebastian Andrzej Siewior
2025-02-21 22:25 ` [PATCH v8 15/17] zram: do not leak page on recompress_store error path Sergey Senozhatsky
2025-02-21 22:25 ` [PATCH v8 16/17] zram: do not leak page on writeback_store " Sergey Senozhatsky
2025-02-21 22:25 ` [PATCH v8 17/17] zram: add might_sleep to zcomp API Sergey Senozhatsky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250221222958.2225035-10-senozhatsky@chromium.org \
--to=senozhatsky@chromium.org \
--cc=akpm@linux-foundation.org \
--cc=bigeasy@linutronix.de \
--cc=hdanton@sina.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=minchan@kernel.org \
--cc=ryncsn@gmail.com \
--cc=yosry.ahmed@linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox