linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: <shiju.jose@huawei.com>
To: <linux-edac@vger.kernel.org>, <linux-cxl@vger.kernel.org>,
	<linux-acpi@vger.kernel.org>, <linux-mm@kvack.org>,
	<linux-kernel@vger.kernel.org>
Cc: <linux-doc@vger.kernel.org>, <bp@alien8.de>,
	<tony.luck@intel.com>, <rafael@kernel.org>, <lenb@kernel.org>,
	<mchehab@kernel.org>, <dan.j.williams@intel.com>,
	<dave@stgolabs.net>, <jonathan.cameron@huawei.com>,
	<dave.jiang@intel.com>, <alison.schofield@intel.com>,
	<vishal.l.verma@intel.com>, <ira.weiny@intel.com>,
	<david@redhat.com>, <Vilas.Sridharan@amd.com>,
	<leo.duran@amd.com>, <Yazen.Ghannam@amd.com>,
	<rientjes@google.com>, <jiaqiyan@google.com>, <Jon.Grimm@amd.com>,
	<dave.hansen@linux.intel.com>, <naoya.horiguchi@nec.com>,
	<james.morse@arm.com>, <jthoughton@google.com>,
	<somasundaram.a@hpe.com>, <erdemaktas@google.com>,
	<pgonda@google.com>, <duenwen@google.com>, <gthelen@google.com>,
	<wschwartz@amperecomputing.com>, <dferguson@amperecomputing.com>,
	<wbs@os.amperecomputing.com>, <nifan.cxl@gmail.com>,
	<yazen.ghannam@amd.com>, <tanxiaofei@huawei.com>,
	<prime.zeng@hisilicon.com>, <roberto.sassu@huawei.com>,
	<kangkang.shen@futurewei.com>, <wanghuiqiang@huawei.com>,
	<linuxarm@huawei.com>, <shiju.jose@huawei.com>
Subject: [PATCH v19 09/15] cxl/memfeature: Add CXL memory device ECS control feature
Date: Fri, 7 Feb 2025 14:44:38 +0000	[thread overview]
Message-ID: <20250207144445.1879-10-shiju.jose@huawei.com> (raw)
In-Reply-To: <20250207144445.1879-1-shiju.jose@huawei.com>

From: Shiju Jose <shiju.jose@huawei.com>

CXL spec 3.1 section 8.2.9.9.11.2 describes the DDR5 ECS (Error Check
Scrub) control feature.
The Error Check Scrub (ECS) is a feature defined in JEDEC DDR5 SDRAM
Specification (JESD79-5) and allows the DRAM to internally read, correct
single-bit errors, and write back corrected data bits to the DRAM array
while providing transparency to error counts.

The ECS control allows the requester to change the log entry type, the ECS
threshold count (provided the request falls within the limits specified in
DDR5 mode registers), switch between codeword mode and row count mode, and
reset the ECS counter.

Register with EDAC device driver, which retrieves the ECS attribute
descriptors from the EDAC ECS and exposes the ECS control attributes to
userspace via sysfs. For example, the ECS control for the memory media FRU0
in CXL mem0 device is located at /sys/bus/edac/devices/cxl_mem0/ecs_fru0/

Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
---
 drivers/cxl/Kconfig           |   1 +
 drivers/cxl/core/memfeature.c | 355 +++++++++++++++++++++++++++++++++-
 2 files changed, 355 insertions(+), 1 deletion(-)

diff --git a/drivers/cxl/Kconfig b/drivers/cxl/Kconfig
index ac5ad2dc5996..892c9a3c5679 100644
--- a/drivers/cxl/Kconfig
+++ b/drivers/cxl/Kconfig
@@ -165,6 +165,7 @@ config CXL_RAS_FEATURES
 	tristate "CXL: Memory RAS features"
 	depends on CXL_MEM
 	depends on EDAC_SCRUB
+	depends on EDAC_ECS
 	help
 	  The CXL memory RAS feature control is optional and allows host to
 	  control the RAS features configurations of CXL Type 3 devices.
diff --git a/drivers/cxl/core/memfeature.c b/drivers/cxl/core/memfeature.c
index c13b25a18e1a..c8540df567f1 100644
--- a/drivers/cxl/core/memfeature.c
+++ b/drivers/cxl/core/memfeature.c
@@ -19,7 +19,7 @@
 #include <cxlmem.h>
 #include "core.h"
 
-#define CXL_DEV_NUM_RAS_FEATURES	1
+#define CXL_DEV_NUM_RAS_FEATURES	2
 #define CXL_DEV_HOUR_IN_SECS	3600
 
 #define CXL_DEV_NAME_LEN	128
@@ -426,6 +426,352 @@ static int cxl_region_scrub_init(struct cxl_region *cxlr,
 	return 0;
 }
 
+/*
+ * CXL DDR5 ECS control definitions.
+ */
+struct cxl_ecs_context {
+	u16 num_media_frus;
+	u16 get_feat_size;
+	u16 set_feat_size;
+	u8 get_version;
+	u8 set_version;
+	u16 effects;
+	struct cxl_memdev *cxlmd;
+};
+
+enum {
+	CXL_ECS_PARAM_LOG_ENTRY_TYPE,
+	CXL_ECS_PARAM_THRESHOLD,
+	CXL_ECS_PARAM_MODE,
+	CXL_ECS_PARAM_RESET_COUNTER,
+};
+
+#define CXL_ECS_LOG_ENTRY_TYPE_MASK	GENMASK(1, 0)
+#define CXL_ECS_REALTIME_REPORT_CAP_MASK	BIT(0)
+#define CXL_ECS_THRESHOLD_COUNT_MASK	GENMASK(2, 0)
+#define CXL_ECS_COUNT_MODE_MASK	BIT(3)
+#define CXL_ECS_RESET_COUNTER_MASK	BIT(4)
+#define CXL_ECS_RESET_COUNTER	1
+
+enum {
+	ECS_THRESHOLD_256 = 256,
+	ECS_THRESHOLD_1024 = 1024,
+	ECS_THRESHOLD_4096 = 4096,
+};
+
+enum {
+	ECS_THRESHOLD_IDX_256 = 3,
+	ECS_THRESHOLD_IDX_1024 = 4,
+	ECS_THRESHOLD_IDX_4096 = 5,
+};
+
+static const u16 ecs_supp_threshold[] = {
+	[ECS_THRESHOLD_IDX_256] = 256,
+	[ECS_THRESHOLD_IDX_1024] = 1024,
+	[ECS_THRESHOLD_IDX_4096] = 4096,
+};
+
+enum {
+	ECS_LOG_ENTRY_TYPE_DRAM = 0x0,
+	ECS_LOG_ENTRY_TYPE_MEM_MEDIA_FRU = 0x1,
+};
+
+enum cxl_ecs_count_mode {
+	ECS_MODE_COUNTS_ROWS = 0,
+	ECS_MODE_COUNTS_CODEWORDS = 1,
+};
+
+/**
+ * struct cxl_ecs_params - CXL memory DDR5 ECS parameter data structure.
+ * @threshold: ECS threshold count per GB of memory cells.
+ * @log_entry_type: ECS log entry type, per DRAM or per memory media FRU.
+ * @reset_counter: [IN] reset ECC counter to default value.
+ * @count_mode: codeword/row count mode
+ *		0 : ECS counts rows with errors
+ *		1 : ECS counts codeword with errors
+ */
+struct cxl_ecs_params {
+	u16 threshold;
+	u8 log_entry_type;
+	u8 reset_counter;
+	enum cxl_ecs_count_mode count_mode;
+};
+
+/*
+ * See CXL spec rev 3.1 @8.2.9.9.11.2 Table 8-210 DDR5 ECS Control Feature
+ * Readable Attributes.
+ */
+struct cxl_ecs_fru_rd_attrs {
+	u8 ecs_cap;
+	__le16 ecs_config;
+	u8 ecs_flags;
+}  __packed;
+
+struct cxl_ecs_rd_attrs {
+	u8 ecs_log_cap;
+	struct cxl_ecs_fru_rd_attrs fru_attrs[];
+}  __packed;
+
+/*
+ * See CXL spec rev 3.1 @8.2.9.9.11.2 Table 8-211 DDR5 ECS Control Feature
+ * Writable Attributes.
+ */
+struct cxl_ecs_fru_wr_attrs {
+	__le16 ecs_config;
+} __packed;
+
+struct cxl_ecs_wr_attrs {
+	u8 ecs_log_cap;
+	struct cxl_ecs_fru_wr_attrs fru_attrs[];
+}  __packed;
+
+/*
+ * CXL DDR5 ECS control functions.
+ */
+static int cxl_mem_ecs_get_attrs(struct device *dev,
+				 struct cxl_ecs_context *cxl_ecs_ctx,
+				 int fru_id, struct cxl_ecs_params *params)
+{
+	struct cxl_memdev *cxlmd = cxl_ecs_ctx->cxlmd;
+	struct cxl_mailbox *cxl_mbox = &cxlmd->cxlds->cxl_mbox;
+	struct cxl_ecs_fru_rd_attrs *fru_rd_attrs;
+	size_t rd_data_size;
+	u8 threshold_index;
+	size_t data_size;
+	u16 ecs_config;
+
+	rd_data_size = cxl_ecs_ctx->get_feat_size;
+
+	struct cxl_ecs_rd_attrs *rd_attrs __free(kvfree) =
+		kvzalloc(rd_data_size, GFP_KERNEL);
+	if (!rd_attrs)
+		return -ENOMEM;
+
+	params->log_entry_type = 0;
+	params->threshold = 0;
+	params->count_mode = 0;
+	data_size = cxl_get_feature(cxl_mbox, &CXL_FEAT_ECS_UUID,
+				    CXL_GET_FEAT_SEL_CURRENT_VALUE,
+				    rd_attrs, rd_data_size, 0, NULL);
+	if (!data_size)
+		return -EIO;
+
+	fru_rd_attrs = rd_attrs->fru_attrs;
+	params->log_entry_type = FIELD_GET(CXL_ECS_LOG_ENTRY_TYPE_MASK,
+					   rd_attrs->ecs_log_cap);
+	ecs_config = le16_to_cpu(fru_rd_attrs[fru_id].ecs_config);
+	threshold_index = FIELD_GET(CXL_ECS_THRESHOLD_COUNT_MASK,
+				    ecs_config);
+	params->threshold = ecs_supp_threshold[threshold_index];
+	params->count_mode = FIELD_GET(CXL_ECS_COUNT_MODE_MASK,
+				       ecs_config);
+	return 0;
+}
+
+static int cxl_mem_ecs_set_attrs(struct device *dev,
+				 struct cxl_ecs_context *cxl_ecs_ctx,
+				 int fru_id, struct cxl_ecs_params *params,
+				 u8 param_type)
+{
+	struct cxl_memdev *cxlmd = cxl_ecs_ctx->cxlmd;
+	struct cxl_mailbox *cxl_mbox = &cxlmd->cxlds->cxl_mbox;
+	struct cxl_ecs_fru_rd_attrs *fru_rd_attrs;
+	struct cxl_ecs_fru_wr_attrs *fru_wr_attrs;
+	size_t rd_data_size, wr_data_size;
+	u16 num_media_frus, count;
+	size_t data_size;
+	u16 ecs_config;
+
+	num_media_frus = cxl_ecs_ctx->num_media_frus;
+	rd_data_size = cxl_ecs_ctx->get_feat_size;
+	wr_data_size = cxl_ecs_ctx->set_feat_size;
+	struct cxl_ecs_rd_attrs *rd_attrs __free(kvfree) =
+		kvzalloc(rd_data_size, GFP_KERNEL);
+	if (!rd_attrs)
+		return -ENOMEM;
+
+	data_size = cxl_get_feature(cxl_mbox, &CXL_FEAT_ECS_UUID,
+				    CXL_GET_FEAT_SEL_CURRENT_VALUE,
+				    rd_attrs, rd_data_size, 0, NULL);
+	if (!data_size)
+		return -EIO;
+
+	struct cxl_ecs_wr_attrs *wr_attrs __free(kvfree) =
+					kvzalloc(wr_data_size, GFP_KERNEL);
+	if (!wr_attrs)
+		return -ENOMEM;
+
+	/*
+	 * Fill writable attributes from the current attributes read
+	 * for all the media FRUs.
+	 */
+	fru_rd_attrs = rd_attrs->fru_attrs;
+	fru_wr_attrs = wr_attrs->fru_attrs;
+	wr_attrs->ecs_log_cap = rd_attrs->ecs_log_cap;
+	for (count = 0; count < num_media_frus; count++)
+		fru_wr_attrs[count].ecs_config = fru_rd_attrs[count].ecs_config;
+
+	/*
+	 * Fill attribute to be set for the media FRU
+	 */
+	ecs_config = le16_to_cpu(fru_rd_attrs[fru_id].ecs_config);
+	switch (param_type) {
+	case CXL_ECS_PARAM_LOG_ENTRY_TYPE:
+		if (params->log_entry_type != ECS_LOG_ENTRY_TYPE_DRAM &&
+		    params->log_entry_type != ECS_LOG_ENTRY_TYPE_MEM_MEDIA_FRU)
+			return -EINVAL;
+
+		wr_attrs->ecs_log_cap = FIELD_PREP(CXL_ECS_LOG_ENTRY_TYPE_MASK,
+						   params->log_entry_type);
+		break;
+	case CXL_ECS_PARAM_THRESHOLD:
+		ecs_config &= ~CXL_ECS_THRESHOLD_COUNT_MASK;
+		switch (params->threshold) {
+		case ECS_THRESHOLD_256:
+			ecs_config |= FIELD_PREP(CXL_ECS_THRESHOLD_COUNT_MASK,
+						 ECS_THRESHOLD_IDX_256);
+			break;
+		case ECS_THRESHOLD_1024:
+			ecs_config |= FIELD_PREP(CXL_ECS_THRESHOLD_COUNT_MASK,
+						 ECS_THRESHOLD_IDX_1024);
+			break;
+		case ECS_THRESHOLD_4096:
+			ecs_config |= FIELD_PREP(CXL_ECS_THRESHOLD_COUNT_MASK,
+						 ECS_THRESHOLD_IDX_4096);
+			break;
+		default:
+			dev_dbg(dev,
+				"Invalid CXL ECS scrub threshold count(%d) to set\n",
+				params->threshold);
+			dev_dbg(dev,
+				"Supported scrub threshold counts: %u, %u, %u\n",
+				ECS_THRESHOLD_256, ECS_THRESHOLD_1024, ECS_THRESHOLD_4096);
+			return -EINVAL;
+		}
+		break;
+	case CXL_ECS_PARAM_MODE:
+		if (params->count_mode != ECS_MODE_COUNTS_ROWS &&
+		    params->count_mode != ECS_MODE_COUNTS_CODEWORDS) {
+			dev_dbg(dev,
+				"Invalid CXL ECS scrub mode(%d) to set\n",
+				params->count_mode);
+			dev_dbg(dev,
+				"Supported ECS Modes: 0: ECS counts rows with errors,"
+				" 1: ECS counts codewords with errors\n");
+			return -EINVAL;
+		}
+		ecs_config &= ~CXL_ECS_COUNT_MODE_MASK;
+		ecs_config |= FIELD_PREP(CXL_ECS_COUNT_MODE_MASK, params->count_mode);
+		break;
+	case CXL_ECS_PARAM_RESET_COUNTER:
+		if (params->reset_counter != CXL_ECS_RESET_COUNTER)
+			return -EINVAL;
+
+		ecs_config &= ~CXL_ECS_RESET_COUNTER_MASK;
+		ecs_config |= FIELD_PREP(CXL_ECS_RESET_COUNTER_MASK, params->reset_counter);
+		break;
+	default:
+		return -EINVAL;
+	}
+	fru_wr_attrs[fru_id].ecs_config = cpu_to_le16(ecs_config);
+
+	return cxl_set_feature(cxl_mbox, &CXL_FEAT_ECS_UUID,
+			       cxl_ecs_ctx->set_version,
+			       wr_attrs, wr_data_size,
+			       CXL_SET_FEAT_FLAG_DATA_SAVED_ACROSS_RESET,
+			       0, NULL);
+}
+
+#define CXL_ECS_GET_ATTR(attrib)						\
+static int cxl_ecs_get_##attrib(struct device *dev, void *drv_data,		\
+				int fru_id, u32 *val)				\
+{										\
+	struct cxl_ecs_context *ctx = drv_data;					\
+	struct cxl_ecs_params params;						\
+	int ret;								\
+										\
+	ret = cxl_mem_ecs_get_attrs(dev, ctx, fru_id, &params);			\
+	if (ret)								\
+		return ret;							\
+										\
+	*val = params.attrib;							\
+										\
+	return 0;								\
+}
+
+CXL_ECS_GET_ATTR(log_entry_type)
+CXL_ECS_GET_ATTR(count_mode)
+CXL_ECS_GET_ATTR(threshold)
+
+#define CXL_ECS_SET_ATTR(attrib, param_type)						\
+static int cxl_ecs_set_##attrib(struct device *dev, void *drv_data,			\
+				int fru_id, u32 val)					\
+{											\
+	struct cxl_ecs_context *ctx = drv_data;						\
+	struct cxl_ecs_params params = {						\
+		.attrib = val,								\
+	};										\
+											\
+	return cxl_mem_ecs_set_attrs(dev, ctx, fru_id, &params, (param_type));		\
+}
+CXL_ECS_SET_ATTR(log_entry_type, CXL_ECS_PARAM_LOG_ENTRY_TYPE)
+CXL_ECS_SET_ATTR(count_mode, CXL_ECS_PARAM_MODE)
+CXL_ECS_SET_ATTR(reset_counter, CXL_ECS_PARAM_RESET_COUNTER)
+CXL_ECS_SET_ATTR(threshold, CXL_ECS_PARAM_THRESHOLD)
+
+static const struct edac_ecs_ops cxl_ecs_ops = {
+	.get_log_entry_type = cxl_ecs_get_log_entry_type,
+	.set_log_entry_type = cxl_ecs_set_log_entry_type,
+	.get_mode = cxl_ecs_get_count_mode,
+	.set_mode = cxl_ecs_set_count_mode,
+	.reset = cxl_ecs_set_reset_counter,
+	.get_threshold = cxl_ecs_get_threshold,
+	.set_threshold = cxl_ecs_set_threshold,
+};
+
+static int cxl_memdev_ecs_init(struct cxl_memdev *cxlmd,
+			       struct edac_dev_feature *ras_feature)
+{
+	struct cxl_ecs_context *cxl_ecs_ctx;
+	struct cxl_feat_entry *feat_entry;
+	int num_media_frus;
+
+	feat_entry = cxl_get_feature_entry(cxlmd, &CXL_FEAT_ECS_UUID);
+	if (IS_ERR(feat_entry))
+		return -EOPNOTSUPP;
+
+	if (!(le32_to_cpu(feat_entry->flags) & CXL_FEATURE_F_CHANGEABLE))
+		return -EOPNOTSUPP;
+
+	num_media_frus = (le16_to_cpu(feat_entry->get_feat_size) -
+			  sizeof(struct cxl_ecs_rd_attrs)) /
+			  sizeof(struct cxl_ecs_fru_rd_attrs);
+	if (!num_media_frus)
+		return -EOPNOTSUPP;
+
+	cxl_ecs_ctx = devm_kzalloc(&cxlmd->dev, sizeof(*cxl_ecs_ctx),
+				   GFP_KERNEL);
+	if (!cxl_ecs_ctx)
+		return -ENOMEM;
+
+	*cxl_ecs_ctx = (struct cxl_ecs_context) {
+		.get_feat_size = le16_to_cpu(feat_entry->get_feat_size),
+		.set_feat_size = le16_to_cpu(feat_entry->set_feat_size),
+		.get_version = feat_entry->get_feat_ver,
+		.set_version = feat_entry->set_feat_ver,
+		.effects = le16_to_cpu(feat_entry->effects),
+		.num_media_frus = num_media_frus,
+		.cxlmd = cxlmd,
+	};
+
+	ras_feature->ft_type = RAS_FEAT_ECS;
+	ras_feature->ecs_ops = &cxl_ecs_ops;
+	ras_feature->ctx = cxl_ecs_ctx;
+	ras_feature->ecs_info.num_media_frus = num_media_frus;
+
+	return 0;
+}
+
 int devm_cxl_memdev_edac_register(struct cxl_memdev *cxlmd)
 {
 	struct edac_dev_feature ras_features[CXL_DEV_NUM_RAS_FEATURES];
@@ -442,6 +788,13 @@ int devm_cxl_memdev_edac_register(struct cxl_memdev *cxlmd)
 	if (rc != -EOPNOTSUPP)
 		num_ras_features++;
 
+	rc = cxl_memdev_ecs_init(cxlmd, &ras_features[num_ras_features]);
+	if (rc < 0 && rc != -EOPNOTSUPP)
+		return rc;
+
+	if (rc != -EOPNOTSUPP)
+		num_ras_features++;
+
 	snprintf(cxl_dev_name, sizeof(cxl_dev_name), "%s_%s",
 		 "cxl", dev_name(&cxlmd->dev));
 
-- 
2.43.0




  parent reply	other threads:[~2025-02-07 14:48 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-07 14:44 [PATCH v19 00/15] EDAC: Scrub: introduce generic EDAC RAS control feature driver + CXL/ACPI-RAS2 drivers shiju.jose
2025-02-07 14:44 ` [PATCH v19 01/15] EDAC: Add support for EDAC device features control shiju.jose
2025-02-07 14:44 ` [PATCH v19 02/15] EDAC: Add scrub control feature shiju.jose
2025-02-07 14:44 ` [PATCH v19 03/15] EDAC: Add ECS " shiju.jose
2025-02-07 14:44 ` [PATCH v19 04/15] EDAC: Add memory repair " shiju.jose
2025-02-07 14:44 ` [PATCH v19 05/15] ACPI:RAS2: Add ACPI RAS2 driver shiju.jose
2025-02-07 14:44 ` [PATCH v19 06/15] ras: mem: Add memory " shiju.jose
2025-02-07 14:44 ` [PATCH v19 07/15] cxl: Add helper function to retrieve a feature entry shiju.jose
2025-02-11  2:39   ` Dave Jiang
2025-02-11 20:46     ` Shiju Jose
2025-02-07 14:44 ` [PATCH v19 08/15] cxl/memfeature: Add CXL memory device patrol scrub control feature shiju.jose
2025-02-07 14:44 ` shiju.jose [this message]
2025-02-07 14:44 ` [PATCH v19 10/15] cxl/mbox: Add support for PERFORM_MAINTENANCE mailbox command shiju.jose
2025-02-07 14:44 ` [PATCH v19 11/15] cxl/region: Add helper function to determine memory is online shiju.jose
2025-02-07 14:44 ` [PATCH v19 12/15] cxl: Support for finding memory operation attributes from the current boot shiju.jose
2025-02-07 14:44 ` [PATCH v19 13/15] cxl/memfeature: Add CXL memory device soft PPR control feature shiju.jose
2025-02-07 14:44 ` [PATCH v19 14/15] EDAC: Update memory repair control interface for memory sparing feature shiju.jose
2025-02-07 14:44 ` [PATCH v19 15/15] cxl/memfeature: Add CXL memory device memory sparing control feature shiju.jose
2025-02-10 17:52 ` [PATCH v19 00/15] EDAC: Scrub: introduce generic EDAC RAS control feature driver + CXL/ACPI-RAS2 drivers Fan Ni
2025-02-11 16:55   ` Shiju Jose
2025-02-11 18:43     ` Fan Ni
2025-02-11 20:42       ` Shiju Jose

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250207144445.1879-10-shiju.jose@huawei.com \
    --to=shiju.jose@huawei.com \
    --cc=Jon.Grimm@amd.com \
    --cc=Vilas.Sridharan@amd.com \
    --cc=Yazen.Ghannam@amd.com \
    --cc=alison.schofield@intel.com \
    --cc=bp@alien8.de \
    --cc=dan.j.williams@intel.com \
    --cc=dave.hansen@linux.intel.com \
    --cc=dave.jiang@intel.com \
    --cc=dave@stgolabs.net \
    --cc=david@redhat.com \
    --cc=dferguson@amperecomputing.com \
    --cc=duenwen@google.com \
    --cc=erdemaktas@google.com \
    --cc=gthelen@google.com \
    --cc=ira.weiny@intel.com \
    --cc=james.morse@arm.com \
    --cc=jiaqiyan@google.com \
    --cc=jonathan.cameron@huawei.com \
    --cc=jthoughton@google.com \
    --cc=kangkang.shen@futurewei.com \
    --cc=lenb@kernel.org \
    --cc=leo.duran@amd.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-cxl@vger.kernel.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-edac@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linuxarm@huawei.com \
    --cc=mchehab@kernel.org \
    --cc=naoya.horiguchi@nec.com \
    --cc=nifan.cxl@gmail.com \
    --cc=pgonda@google.com \
    --cc=prime.zeng@hisilicon.com \
    --cc=rafael@kernel.org \
    --cc=rientjes@google.com \
    --cc=roberto.sassu@huawei.com \
    --cc=somasundaram.a@hpe.com \
    --cc=tanxiaofei@huawei.com \
    --cc=tony.luck@intel.com \
    --cc=vishal.l.verma@intel.com \
    --cc=wanghuiqiang@huawei.com \
    --cc=wbs@os.amperecomputing.com \
    --cc=wschwartz@amperecomputing.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox