From: SeongJae Park <sj@kernel.org>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: SeongJae Park <sj@kernel.org>,
"Liam R. Howlett" <Liam.Howlett@oracle.com>,
David Hildenbrand <david@redhat.com>,
Davidlohr Bueso <dave@stgolabs.net>,
Lorenzo Stoakes <lorenzo.stoakes@oracle.com>,
Shakeel Butt <shakeel.butt@linux.dev>,
Vlastimil Babka <vbabka@suse.cz>,
linux-kernel@vger.kernel.org, linux-mm@kvack.org
Subject: [PATCH 1/4] mm/madvise: split out mmap locking operations for madvise()
Date: Wed, 5 Feb 2025 22:15:14 -0800 [thread overview]
Message-ID: <20250206061517.2958-2-sj@kernel.org> (raw)
In-Reply-To: <20250206061517.2958-1-sj@kernel.org>
Split out the madvise behavior-dependent mmap_lock operations from
do_madvise(), for easier reuse of the logic in an upcoming change.
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: SeongJae Park <sj@kernel.org>
---
mm/madvise.c | 45 ++++++++++++++++++++++++++++++++-------------
1 file changed, 32 insertions(+), 13 deletions(-)
diff --git a/mm/madvise.c b/mm/madvise.c
index c8e28d51978a..df5a87a1846a 100644
--- a/mm/madvise.c
+++ b/mm/madvise.c
@@ -1567,6 +1567,33 @@ int madvise_set_anon_name(struct mm_struct *mm, unsigned long start,
madvise_vma_anon_name);
}
#endif /* CONFIG_ANON_VMA_NAME */
+
+static int madvise_lock(struct mm_struct *mm, int behavior)
+{
+
+#ifdef CONFIG_MEMORY_FAILURE
+ if (behavior == MADV_HWPOISON || behavior == MADV_SOFT_OFFLINE)
+ return 0;
+#endif
+
+ if (madvise_need_mmap_write(behavior)) {
+ if (mmap_write_lock_killable(mm))
+ return -EINTR;
+ } else {
+ mmap_read_lock(mm);
+ }
+ return 0;
+
+}
+
+static void madvise_unlock(struct mm_struct *mm, int behavior)
+{
+ if (madvise_need_mmap_write(behavior))
+ mmap_write_unlock(mm);
+ else
+ mmap_read_unlock(mm);
+}
+
/*
* The madvise(2) system call.
*
@@ -1643,7 +1670,6 @@ int do_madvise(struct mm_struct *mm, unsigned long start, size_t len_in, int beh
{
unsigned long end;
int error;
- int write;
size_t len;
struct blk_plug plug;
@@ -1665,19 +1691,15 @@ int do_madvise(struct mm_struct *mm, unsigned long start, size_t len_in, int beh
if (end == start)
return 0;
+ error = madvise_lock(mm, behavior);
+ if (error)
+ return error;
+
#ifdef CONFIG_MEMORY_FAILURE
if (behavior == MADV_HWPOISON || behavior == MADV_SOFT_OFFLINE)
return madvise_inject_error(behavior, start, start + len_in);
#endif
- write = madvise_need_mmap_write(behavior);
- if (write) {
- if (mmap_write_lock_killable(mm))
- return -EINTR;
- } else {
- mmap_read_lock(mm);
- }
-
start = untagged_addr_remote(mm, start);
end = start + len;
@@ -1694,10 +1716,7 @@ int do_madvise(struct mm_struct *mm, unsigned long start, size_t len_in, int beh
}
blk_finish_plug(&plug);
- if (write)
- mmap_write_unlock(mm);
- else
- mmap_read_unlock(mm);
+ madvise_unlock(mm, behavior);
return error;
}
--
2.39.5
next prev parent reply other threads:[~2025-02-06 6:15 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-06 6:15 [PATCH 0/4] mm/madvise: remove redundant mmap_lock operations from process_madvise() SeongJae Park
2025-02-06 6:15 ` SeongJae Park [this message]
2025-02-06 20:27 ` [PATCH 1/4] mm/madvise: split out mmap locking operations for madvise() Liam R. Howlett
2025-02-06 6:15 ` [PATCH 2/4] mm/madvise: split out madvise input validity check SeongJae Park
2025-02-06 20:29 ` Liam R. Howlett
2025-02-06 6:15 ` [PATCH 3/4] mm/madvise: split out madvise() behavior execution SeongJae Park
2025-02-06 20:30 ` Liam R. Howlett
2025-02-06 6:15 ` [PATCH 4/4] mm/madvise: remove redundant mmap_lock operations from process_madvise() SeongJae Park
2025-02-06 13:04 ` Lorenzo Stoakes
2025-02-06 16:53 ` SeongJae Park
2025-02-06 20:32 ` Liam R. Howlett
2025-02-11 5:30 ` Lai, Yi
2025-02-11 6:37 ` SeongJae Park
2025-02-11 10:34 ` Lorenzo Stoakes
2025-02-11 18:32 ` SeongJae Park
2025-02-11 8:48 ` [PATCH 0/4] " Vern Hao
2025-02-11 18:28 ` SeongJae Park
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250206061517.2958-2-sj@kernel.org \
--to=sj@kernel.org \
--cc=Liam.Howlett@oracle.com \
--cc=akpm@linux-foundation.org \
--cc=dave@stgolabs.net \
--cc=david@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=lorenzo.stoakes@oracle.com \
--cc=shakeel.butt@linux.dev \
--cc=vbabka@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox