From: Yury Khrustalev <yury.khrustalev@arm.com>
To: linux-arch@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>,
Kevin Brodsky <kevin.brodsky@arm.com>,
Joey Gouly <joey.gouly@arm.com>,
Dave Hansen <dave.hansen@linux.intel.com>,
Sandipan Das <sandipan@linux.ibm.com>,
Michael Ellerman <mpe@ellerman.id.au>,
Catalin Marinas <catalin.marinas@arm.com>,
linuxppc-dev@lists.ozlabs.org,
linux-arm-kernel@lists.infradead.org, x86@kernel.org,
linux-mm@kvack.org, linux-kselftest@vger.kernel.org,
Andrew Morton <akpm@linux-foundation.org>,
nd@arm.com, Yury Khrustalev <yury.khrustalev@arm.com>
Subject: [RESEND v4 2/3] selftests/mm: Use PKEY_UNRESTRICTED macro
Date: Mon, 13 Jan 2025 17:06:18 +0000 [thread overview]
Message-ID: <20250113170619.484698-3-yury.khrustalev@arm.com> (raw)
In-Reply-To: <20250113170619.484698-1-yury.khrustalev@arm.com>
Replace literal 0 with macro PKEY_UNRESTRICTED where pkey_*() functions
are used in mm selftests for memory protection keys.
Signed-off-by: Yury Khrustalev <yury.khrustalev@arm.com>
Suggested-by: Joey Gouly <joey.gouly@arm.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
---
tools/testing/selftests/mm/mseal_test.c | 6 +++---
tools/testing/selftests/mm/pkey-helpers.h | 3 ++-
tools/testing/selftests/mm/pkey_sighandler_tests.c | 4 ++--
tools/testing/selftests/mm/protection_keys.c | 2 +-
4 files changed, 8 insertions(+), 7 deletions(-)
diff --git a/tools/testing/selftests/mm/mseal_test.c b/tools/testing/selftests/mm/mseal_test.c
index 01675c412b2a..30ea37e8ecf8 100644
--- a/tools/testing/selftests/mm/mseal_test.c
+++ b/tools/testing/selftests/mm/mseal_test.c
@@ -218,7 +218,7 @@ bool seal_support(void)
bool pkey_supported(void)
{
#if defined(__i386__) || defined(__x86_64__) /* arch */
- int pkey = sys_pkey_alloc(0, 0);
+ int pkey = sys_pkey_alloc(0, PKEY_UNRESTRICTED);
if (pkey > 0)
return true;
@@ -1671,7 +1671,7 @@ static void test_seal_discard_ro_anon_on_pkey(bool seal)
setup_single_address_rw(size, &ptr);
FAIL_TEST_IF_FALSE(ptr != (void *)-1);
- pkey = sys_pkey_alloc(0, 0);
+ pkey = sys_pkey_alloc(0, PKEY_UNRESTRICTED);
FAIL_TEST_IF_FALSE(pkey > 0);
ret = sys_mprotect_pkey((void *)ptr, size, PROT_READ | PROT_WRITE, pkey);
@@ -1683,7 +1683,7 @@ static void test_seal_discard_ro_anon_on_pkey(bool seal)
}
/* sealing doesn't take effect if PKRU allow write. */
- set_pkey(pkey, 0);
+ set_pkey(pkey, PKEY_UNRESTRICTED);
ret = sys_madvise(ptr, size, MADV_DONTNEED);
FAIL_TEST_IF_FALSE(!ret);
diff --git a/tools/testing/selftests/mm/pkey-helpers.h b/tools/testing/selftests/mm/pkey-helpers.h
index f7cfe163b0ff..10fa3ca9b05b 100644
--- a/tools/testing/selftests/mm/pkey-helpers.h
+++ b/tools/testing/selftests/mm/pkey-helpers.h
@@ -12,6 +12,7 @@
#include <stdlib.h>
#include <ucontext.h>
#include <sys/mman.h>
+#include <linux/mman.h>
#include "../kselftest.h"
@@ -224,7 +225,7 @@ static inline u32 *siginfo_get_pkey_ptr(siginfo_t *si)
static inline int kernel_has_pkeys(void)
{
/* try allocating a key and see if it succeeds */
- int ret = sys_pkey_alloc(0, 0);
+ int ret = sys_pkey_alloc(0, PKEY_UNRESTRICTED);
if (ret <= 0) {
return 0;
}
diff --git a/tools/testing/selftests/mm/pkey_sighandler_tests.c b/tools/testing/selftests/mm/pkey_sighandler_tests.c
index c593a426341c..2015ed7e0928 100644
--- a/tools/testing/selftests/mm/pkey_sighandler_tests.c
+++ b/tools/testing/selftests/mm/pkey_sighandler_tests.c
@@ -314,7 +314,7 @@ static void test_sigsegv_handler_with_different_pkey_for_stack(void)
__write_pkey_reg(pkey_reg);
/* Protect the new stack with MPK 1 */
- pkey = pkey_alloc(0, 0);
+ pkey = pkey_alloc(0, PKEY_UNRESTRICTED);
pkey_mprotect(stack, STACK_SIZE, PROT_READ | PROT_WRITE, pkey);
/* Set up alternate signal stack that will use the default MPK */
@@ -487,7 +487,7 @@ static void test_pkru_sigreturn(void)
__write_pkey_reg(pkey_reg);
/* Protect the stack with MPK 2 */
- pkey = pkey_alloc(0, 0);
+ pkey = pkey_alloc(0, PKEY_UNRESTRICTED);
pkey_mprotect(stack, STACK_SIZE, PROT_READ | PROT_WRITE, pkey);
/* Set up alternate signal stack that will use the default MPK */
diff --git a/tools/testing/selftests/mm/protection_keys.c b/tools/testing/selftests/mm/protection_keys.c
index 4990f7ab4cb7..cca7435a7bc5 100644
--- a/tools/testing/selftests/mm/protection_keys.c
+++ b/tools/testing/selftests/mm/protection_keys.c
@@ -491,7 +491,7 @@ int sys_pkey_alloc(unsigned long flags, unsigned long init_val)
int alloc_pkey(void)
{
int ret;
- unsigned long init_val = 0x0;
+ unsigned long init_val = PKEY_UNRESTRICTED;
dprintf1("%s()::%d, pkey_reg: 0x%016llx shadow: %016llx\n",
__func__, __LINE__, __read_pkey_reg(), shadow_pkey_reg);
--
2.39.5
next prev parent reply other threads:[~2025-01-13 17:06 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-13 17:06 [RESEND v4 0/3] mm/pkey: Add " Yury Khrustalev
2025-01-13 17:06 ` [RESEND v4 1/3] " Yury Khrustalev
2025-01-13 17:06 ` Yury Khrustalev [this message]
2025-01-13 17:06 ` [RESEND v4 3/3] selftests/powerpc: Use " Yury Khrustalev
2025-02-12 17:24 ` [RESEND v4 0/3] mm/pkey: Add " Catalin Marinas
2025-02-12 21:29 ` Andrew Morton
2025-02-17 21:33 ` Catalin Marinas
2025-02-18 9:56 ` Yury Khrustalev
-- strict thread matches above, loose matches on Subject: below --
2024-12-09 9:47 Yury Khrustalev
2024-12-09 9:47 ` [RESEND v4 2/3] selftests/mm: Use " Yury Khrustalev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250113170619.484698-3-yury.khrustalev@arm.com \
--to=yury.khrustalev@arm.com \
--cc=akpm@linux-foundation.org \
--cc=arnd@arndb.de \
--cc=catalin.marinas@arm.com \
--cc=dave.hansen@linux.intel.com \
--cc=joey.gouly@arm.com \
--cc=kevin.brodsky@arm.com \
--cc=linux-arch@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=nd@arm.com \
--cc=sandipan@linux.ibm.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox