From: Simon Horman <horms@kernel.org>
To: Yunsheng Lin <linyunsheng@huawei.com>
Cc: davem@davemloft.net, kuba@kernel.org, pabeni@redhat.com,
zhangkun09@huawei.com, fanghaiqing@huawei.com,
liuyonglong@huawei.com, Robin Murphy <robin.murphy@arm.com>,
Alexander Duyck <alexander.duyck@gmail.com>,
IOMMU <iommu@lists.linux.dev>,
Andrew Morton <akpm@linux-foundation.org>,
Eric Dumazet <edumazet@google.com>,
Jesper Dangaard Brouer <hawk@kernel.org>,
Ilias Apalodimas <ilias.apalodimas@linaro.org>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org,
netdev@vger.kernel.org
Subject: Re: [PATCH net-next v3 3/3] page_pool: fix IOMMU crash when driver has already unbound
Date: Tue, 22 Oct 2024 17:40:13 +0100 [thread overview]
Message-ID: <20241022164013.GI402847@kernel.org> (raw)
In-Reply-To: <20241022032214.3915232-4-linyunsheng@huawei.com>
On Tue, Oct 22, 2024 at 11:22:13AM +0800, Yunsheng Lin wrote:
> Networking driver with page_pool support may hand over page
> still with dma mapping to network stack and try to reuse that
> page after network stack is done with it and passes it back
> to page_pool to avoid the penalty of dma mapping/unmapping.
> With all the caching in the network stack, some pages may be
> held in the network stack without returning to the page_pool
> soon enough, and with VF disable causing the driver unbound,
> the page_pool does not stop the driver from doing it's
> unbounding work, instead page_pool uses workqueue to check
> if there is some pages coming back from the network stack
> periodically, if there is any, it will do the dma unmmapping
> related cleanup work.
>
> As mentioned in [1], attempting DMA unmaps after the driver
> has already unbound may leak resources or at worst corrupt
> memory. Fundamentally, the page pool code cannot allow DMA
> mappings to outlive the driver they belong to.
>
> Currently it seems there are at least two cases that the page
> is not released fast enough causing dma unmmapping done after
> driver has already unbound:
> 1. ipv4 packet defragmentation timeout: this seems to cause
> delay up to 30 secs.
> 2. skb_defer_free_flush(): this may cause infinite delay if
> there is no triggering for net_rx_action().
>
> In order not to do the dma unmmapping after driver has already
> unbound and stall the unloading of the networking driver, add
> the pool->items array to record all the pages including the ones
> which are handed over to network stack, so the page_pool can
> do the dma unmmapping for those pages when page_pool_destroy()
> is called. As the pool->items need to be large enough to avoid
> performance degradation, add a 'item_full' stat to indicate the
> allocation failure due to unavailability of pool->items.
>
> Note, the devmem patchset seems to make the bug harder to fix,
> and may make backporting harder too. As there is no actual user
> for the devmem and the fixing for devmem is unclear for now,
> this patch does not consider fixing the case for devmem yet.
>
> 1. https://lore.kernel.org/lkml/8067f204-1380-4d37-8ffd-007fc6f26738@kernel.org/T/
>
> Fixes: f71fec47c2df ("page_pool: make sure struct device is stable")
> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
> Tested-by: Yonglong Liu <liuyonglong@huawei.com>
> CC: Robin Murphy <robin.murphy@arm.com>
> CC: Alexander Duyck <alexander.duyck@gmail.com>
> CC: IOMMU <iommu@lists.linux.dev>
...
> diff --git a/include/net/page_pool/types.h b/include/net/page_pool/types.h
> index c022c410abe3..194006d2930f 100644
> --- a/include/net/page_pool/types.h
> +++ b/include/net/page_pool/types.h
> @@ -102,6 +102,7 @@ struct page_pool_params {
> * @refill: an allocation which triggered a refill of the cache
> * @waive: pages obtained from the ptr ring that cannot be added to
> * the cache due to a NUMA mismatch
> + * @item_full items array is full
No need to block progress because of this, but the correct syntax is:
* @item_full: ...
Flagged by ./scripts/kernel-doc -none
...
next prev parent reply other threads:[~2024-10-22 16:40 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20241022032214.3915232-1-linyunsheng@huawei.com>
2024-10-22 3:22 ` Yunsheng Lin
2024-10-22 16:40 ` Simon Horman [this message]
2024-10-22 18:14 ` Jesper Dangaard Brouer
2024-10-23 8:59 ` Yunsheng Lin
2024-10-24 14:40 ` Toke Høiland-Jørgensen
2024-10-25 3:20 ` Yunsheng Lin
2024-10-25 11:16 ` Toke Høiland-Jørgensen
2024-10-25 14:07 ` Jesper Dangaard Brouer
2024-10-26 7:33 ` Yunsheng Lin
2024-11-06 13:25 ` Jesper Dangaard Brouer
2024-11-06 15:57 ` Jesper Dangaard Brouer
2024-11-06 19:55 ` Alexander Duyck
2024-11-07 11:10 ` Yunsheng Lin
2024-11-07 11:09 ` Yunsheng Lin
2024-11-11 11:31 ` Yunsheng Lin
2024-11-11 18:51 ` Toke Høiland-Jørgensen
2024-11-12 12:22 ` Yunsheng Lin
2024-11-12 14:19 ` Jesper Dangaard Brouer
2024-11-13 12:21 ` Yunsheng Lin
[not found] ` <40c9b515-1284-4c49-bdce-c9eeff5092f9@huawei.com>
2024-11-18 15:11 ` Jesper Dangaard Brouer
2024-10-26 7:32 ` Yunsheng Lin
2024-10-29 13:58 ` Toke Høiland-Jørgensen
2024-10-30 11:30 ` Yunsheng Lin
2024-10-30 11:57 ` Toke Høiland-Jørgensen
2024-10-31 12:17 ` Yunsheng Lin
2024-10-31 16:18 ` Toke Høiland-Jørgensen
2024-11-01 11:11 ` Yunsheng Lin
2024-11-05 20:11 ` Jesper Dangaard Brouer
2024-11-06 10:56 ` Yunsheng Lin
2024-11-06 14:17 ` Robin Murphy
2024-11-07 8:41 ` Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241022164013.GI402847@kernel.org \
--to=horms@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=alexander.duyck@gmail.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=fanghaiqing@huawei.com \
--cc=hawk@kernel.org \
--cc=ilias.apalodimas@linaro.org \
--cc=iommu@lists.linux.dev \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linyunsheng@huawei.com \
--cc=liuyonglong@huawei.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=robin.murphy@arm.com \
--cc=zhangkun09@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox