From: Zi Yan <ziy@nvidia.com>
To: linux-mm@kvack.org
Cc: Andrew Morton <akpm@linux-foundation.org>,
David Hildenbrand <david@redhat.com>,
"Huang, Ying" <ying.huang@intel.com>,
Baolin Wang <baolin.wang@linux.alibaba.com>,
Kefeng Wang <wangkefeng.wang@huawei.com>,
Yang Shi <shy828301@gmail.com>, Mel Gorman <mgorman@suse.de>,
linux-kernel@vger.kernel.org, Zi Yan <ziy@nvidia.com>
Subject: [PATCH v3 3/3] mm/migrate: move common code to numa_migrate_check (was numa_migrate_prep)
Date: Fri, 9 Aug 2024 10:59:06 -0400 [thread overview]
Message-ID: <20240809145906.1513458-4-ziy@nvidia.com> (raw)
In-Reply-To: <20240809145906.1513458-1-ziy@nvidia.com>
do_numa_page() and do_huge_pmd_numa_page() share a lot of common code. To
reduce redundancy, move common code to numa_migrate_prep() and rename
the function to numa_migrate_check() to reflect its functionality.
Now do_huge_pmd_numa_page() also checks shared folios to set TNF_SHARED
flag.
Suggested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
---
mm/huge_memory.c | 29 +++++++++-------------
mm/internal.h | 5 ++--
mm/memory.c | 63 +++++++++++++++++++++++++-----------------------
3 files changed, 47 insertions(+), 50 deletions(-)
diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index 666fa675e5b6..f2fd3aabb67b 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -1669,22 +1669,23 @@ static inline bool can_change_pmd_writable(struct vm_area_struct *vma,
vm_fault_t do_huge_pmd_numa_page(struct vm_fault *vmf)
{
struct vm_area_struct *vma = vmf->vma;
- pmd_t oldpmd = vmf->orig_pmd;
- pmd_t pmd;
struct folio *folio;
unsigned long haddr = vmf->address & HPAGE_PMD_MASK;
int nid = NUMA_NO_NODE;
- int target_nid, last_cpupid = (-1 & LAST_CPUPID_MASK);
+ int target_nid, last_cpupid;
+ pmd_t pmd, old_pmd;
bool writable = false;
int flags = 0;
vmf->ptl = pmd_lock(vma->vm_mm, vmf->pmd);
- if (unlikely(!pmd_same(oldpmd, *vmf->pmd))) {
+ old_pmd = pmdp_get(vmf->pmd);
+
+ if (unlikely(!pmd_same(old_pmd, vmf->orig_pmd))) {
spin_unlock(vmf->ptl);
return 0;
}
- pmd = pmd_modify(oldpmd, vma->vm_page_prot);
+ pmd = pmd_modify(old_pmd, vma->vm_page_prot);
/*
* Detect now whether the PMD could be writable; this information
@@ -1699,18 +1700,10 @@ vm_fault_t do_huge_pmd_numa_page(struct vm_fault *vmf)
if (!folio)
goto out_map;
- /* See similar comment in do_numa_page for explanation */
- if (!writable)
- flags |= TNF_NO_GROUP;
-
nid = folio_nid(folio);
- /*
- * For memory tiering mode, cpupid of slow memory page is used
- * to record page access time. So use default value.
- */
- if (!folio_use_access_time(folio))
- last_cpupid = folio_last_cpupid(folio);
- target_nid = numa_migrate_prep(folio, vmf, haddr, nid, &flags);
+
+ target_nid = numa_migrate_check(folio, vmf, haddr, &flags, writable,
+ &last_cpupid);
if (target_nid == NUMA_NO_NODE)
goto out_map;
if (migrate_misplaced_folio_prepare(folio, vma, target_nid)) {
@@ -1730,13 +1723,13 @@ vm_fault_t do_huge_pmd_numa_page(struct vm_fault *vmf)
flags |= TNF_MIGRATE_FAIL;
vmf->ptl = pmd_lock(vma->vm_mm, vmf->pmd);
- if (unlikely(!pmd_same(oldpmd, *vmf->pmd))) {
+ if (unlikely(!pmd_same(pmdp_get(vmf->pmd), vmf->orig_pmd))) {
spin_unlock(vmf->ptl);
return 0;
}
out_map:
/* Restore the PMD */
- pmd = pmd_modify(oldpmd, vma->vm_page_prot);
+ pmd = pmd_modify(pmdp_get(vmf->pmd), vma->vm_page_prot);
pmd = pmd_mkyoung(pmd);
if (writable)
pmd = pmd_mkwrite(pmd, vma);
diff --git a/mm/internal.h b/mm/internal.h
index 52f7fc4e8ac3..fb16e18c9761 100644
--- a/mm/internal.h
+++ b/mm/internal.h
@@ -1191,8 +1191,9 @@ void vunmap_range_noflush(unsigned long start, unsigned long end);
void __vunmap_range_noflush(unsigned long start, unsigned long end);
-int numa_migrate_prep(struct folio *folio, struct vm_fault *vmf,
- unsigned long addr, int page_nid, int *flags);
+int numa_migrate_check(struct folio *folio, struct vm_fault *vmf,
+ unsigned long addr, int *flags, bool writable,
+ int *last_cpupid);
void free_zone_device_folio(struct folio *folio);
int migrate_device_coherent_page(struct page *page);
diff --git a/mm/memory.c b/mm/memory.c
index bf791da57cab..e4f27c0696cb 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -5368,16 +5368,43 @@ static vm_fault_t do_fault(struct vm_fault *vmf)
return ret;
}
-int numa_migrate_prep(struct folio *folio, struct vm_fault *vmf,
- unsigned long addr, int page_nid, int *flags)
+int numa_migrate_check(struct folio *folio, struct vm_fault *vmf,
+ unsigned long addr, int *flags,
+ bool writable, int *last_cpupid)
{
struct vm_area_struct *vma = vmf->vma;
+ /*
+ * Avoid grouping on RO pages in general. RO pages shouldn't hurt as
+ * much anyway since they can be in shared cache state. This misses
+ * the case where a mapping is writable but the process never writes
+ * to it but pte_write gets cleared during protection updates and
+ * pte_dirty has unpredictable behaviour between PTE scan updates,
+ * background writeback, dirty balancing and application behaviour.
+ */
+ if (!writable)
+ *flags |= TNF_NO_GROUP;
+
+ /*
+ * Flag if the folio is shared between multiple address spaces. This
+ * is later used when determining whether to group tasks together
+ */
+ if (folio_likely_mapped_shared(folio) && (vma->vm_flags & VM_SHARED))
+ *flags |= TNF_SHARED;
+ /*
+ * For memory tiering mode, cpupid of slow memory page is used
+ * to record page access time. So use default value.
+ */
+ if (folio_use_access_time(folio))
+ *last_cpupid = (-1 & LAST_CPUPID_MASK);
+ else
+ *last_cpupid = folio_last_cpupid(folio);
+
/* Record the current PID acceesing VMA */
vma_set_access_pid_bit(vma);
count_vm_numa_event(NUMA_HINT_FAULTS);
- if (page_nid == numa_node_id()) {
+ if (folio_nid(folio) == numa_node_id()) {
count_vm_numa_event(NUMA_HINT_FAULTS_LOCAL);
*flags |= TNF_FAULT_LOCAL;
}
@@ -5479,35 +5506,11 @@ static vm_fault_t do_numa_page(struct vm_fault *vmf)
if (!folio || folio_is_zone_device(folio))
goto out_map;
- /*
- * Avoid grouping on RO pages in general. RO pages shouldn't hurt as
- * much anyway since they can be in shared cache state. This misses
- * the case where a mapping is writable but the process never writes
- * to it but pte_write gets cleared during protection updates and
- * pte_dirty has unpredictable behaviour between PTE scan updates,
- * background writeback, dirty balancing and application behaviour.
- */
- if (!writable)
- flags |= TNF_NO_GROUP;
-
- /*
- * Flag if the folio is shared between multiple address spaces. This
- * is later used when determining whether to group tasks together
- */
- if (folio_likely_mapped_shared(folio) && (vma->vm_flags & VM_SHARED))
- flags |= TNF_SHARED;
-
nid = folio_nid(folio);
nr_pages = folio_nr_pages(folio);
- /*
- * For memory tiering mode, cpupid of slow memory page is used
- * to record page access time. So use default value.
- */
- if (folio_use_access_time(folio))
- last_cpupid = (-1 & LAST_CPUPID_MASK);
- else
- last_cpupid = folio_last_cpupid(folio);
- target_nid = numa_migrate_prep(folio, vmf, vmf->address, nid, &flags);
+
+ target_nid = numa_migrate_check(folio, vmf, vmf->address, &flags,
+ writable, &last_cpupid);
if (target_nid == NUMA_NO_NODE)
goto out_map;
if (migrate_misplaced_folio_prepare(folio, vma, target_nid)) {
--
2.43.0
next prev parent reply other threads:[~2024-08-09 15:01 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-09 14:59 [PATCH v3 0/3] do_numa_page(),do_huge_pmd_numa_page() fix and cleanup Zi Yan
2024-08-09 14:59 ` [PATCH v3 1/3] mm/numa: no task_numa_fault() call if PTE is changed Zi Yan
2024-08-09 15:29 ` David Hildenbrand
2024-08-09 14:59 ` [PATCH v3 2/3] mm/numa: no task_numa_fault() call if PMD " Zi Yan
2024-08-09 15:29 ` David Hildenbrand
2024-08-09 14:59 ` Zi Yan [this message]
2024-08-09 15:32 ` [PATCH v3 3/3] mm/migrate: move common code to numa_migrate_check (was numa_migrate_prep) David Hildenbrand
2024-08-12 2:20 ` Huang, Ying
2024-08-12 9:06 ` David Hildenbrand
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240809145906.1513458-4-ziy@nvidia.com \
--to=ziy@nvidia.com \
--cc=akpm@linux-foundation.org \
--cc=baolin.wang@linux.alibaba.com \
--cc=david@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mgorman@suse.de \
--cc=shy828301@gmail.com \
--cc=wangkefeng.wang@huawei.com \
--cc=ying.huang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox