From: kernel test robot <lkp@intel.com>
To: Rayyan Ansari <rayyan.ansari@linaro.org>
Cc: oe-kbuild-all@lists.linux.dev,
Linux Memory Management List <linux-mm@kvack.org>,
Damien Le Moal <dlemoal@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>
Subject: [linux-next:master 13643/13921] arch/arm/boot/dts/qcom/qcom-ipq8064-ap148.dtb: sata@29000000: clock-names:0: 'slave_iface' was expected
Date: Sat, 27 Jul 2024 06:00:36 +0800 [thread overview]
Message-ID: <202407270547.03GsBp5q-lkp@intel.com> (raw)
tree: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git master
head: 668d33c9ff922c4590c58754ab064aaf53c387dd
commit: b835b773dbf1b1e8651b6974d5e56731e191c918 [13643/13921] dt-bindings: ata: qcom,ipq806x-ahci: use dtschema
config: arm-randconfig-051-20240726 (https://download.01.org/0day-ci/archive/20240727/202407270547.03GsBp5q-lkp@intel.com/config)
compiler: clang version 15.0.7 (https://github.com/llvm/llvm-project 8dfdcc7b7bf66834a761bd8de445840ef68e4d1a)
dtschema version: 2024.6.dev4+g23441a4
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240727/202407270547.03GsBp5q-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202407270547.03GsBp5q-lkp@intel.com/
dtcheck warnings: (new ones prefixed by >>)
from schema $id: http://devicetree.org/schemas/root-node.yaml#
arch/arm/boot/dts/qcom/qcom-ipq8064-ap148.dtb: rpm@108000: 'clock-controller', 'clock-names', 'clocks' do not match any of the regexes: '^regulators(-[01])?$', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,rpm.yaml#
arch/arm/boot/dts/qcom/qcom-ipq8064-ap148.dtb: /soc/pinmux@800000: failed to match any schema with compatible: ['qcom,ipq8064-pinctrl']
arch/arm/boot/dts/qcom/qcom-ipq8064-ap148.dtb: syscon@3000000: compatible: ['syscon'] is too short
from schema $id: http://devicetree.org/schemas/mfd/syscon-common.yaml#
arch/arm/boot/dts/qcom/qcom-ipq8064-ap148.dtb: amba: $nodename:0: 'amba' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm/boot/dts/qcom/qcom-ipq8064-ap148.dtb: syscon@1bb00000: compatible: ['syscon'] is too short
from schema $id: http://devicetree.org/schemas/mfd/syscon-common.yaml#
>> arch/arm/boot/dts/qcom/qcom-ipq8064-ap148.dtb: sata@29000000: clock-names:0: 'slave_iface' was expected
from schema $id: http://devicetree.org/schemas/ata/ahci-platform.yaml#
arch/arm/boot/dts/qcom/qcom-ipq8064-ap148.dtb: leds: led-0:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
'usbdev' is not one of ['backlight', 'default-on', 'heartbeat', 'disk-activity', 'disk-read', 'disk-write', 'timer', 'pattern', 'audio-micmute', 'audio-mute', 'bluetooth-power', 'flash', 'kbd-capslock', 'mtd', 'nand-disk', 'none', 'torch', 'usb-gadget', 'usb-host', 'usbport']
'usbdev' does not match '^cpu[0-9]*$'
'usbdev' does not match '^hci[0-9]+-power$'
'usbdev' does not match '^mmc[0-9]+$'
'usbdev' does not match '^phy[0-9]+tx$'
from schema $id: http://devicetree.org/schemas/leds/leds-gpio.yaml#
arch/arm/boot/dts/qcom/qcom-ipq8064-ap148.dtb: leds: led-0: Unevaluated properties are not allowed ('linux,default-trigger' was unexpected)
from schema $id: http://devicetree.org/schemas/leds/leds-gpio.yaml#
--
arch/arm/boot/dts/qcom/qcom-ipq8064-rb3011.dtb: usb@110f8800: 'interrupt-names' is a required property
from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
arch/arm/boot/dts/qcom/qcom-ipq8064-rb3011.dtb: usb@110f8800: 'oneOf' conditional failed, one must be fixed:
'interrupts' is a required property
'interrupts-extended' is a required property
from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
arch/arm/boot/dts/qcom/qcom-ipq8064-rb3011.dtb: amba: $nodename:0: 'amba' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
from schema $id: http://devicetree.org/schemas/simple-bus.yaml#
arch/arm/boot/dts/qcom/qcom-ipq8064-rb3011.dtb: syscon@1bb00000: compatible: ['syscon'] is too short
from schema $id: http://devicetree.org/schemas/mfd/syscon-common.yaml#
>> arch/arm/boot/dts/qcom/qcom-ipq8064-rb3011.dtb: sata@29000000: clock-names:0: 'slave_iface' was expected
from schema $id: http://devicetree.org/schemas/ata/ahci-platform.yaml#
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
reply other threads:[~2024-07-26 22:01 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=202407270547.03GsBp5q-lkp@intel.com \
--to=lkp@intel.com \
--cc=dlemoal@kernel.org \
--cc=krzk@kernel.org \
--cc=linux-mm@kvack.org \
--cc=oe-kbuild-all@lists.linux.dev \
--cc=rayyan.ansari@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox