Re: [PATCH v7 07/11] iomap: fix iomap_dio_zero() for fs bs > system page size

["Darrick J. Wong" <djwong@kernel.org>]

On Fri, Jun 07, 2024 at 02:58:58PM +0000, Pankaj Raghav (Samsung) wrote:
> From: Pankaj Raghav <p.raghav@samsung.com>
> 
> iomap_dio_zero() will pad a fs block with zeroes if the direct IO size
> < fs block size. iomap_dio_zero() has an implicit assumption that fs block
> size < page_size. This is true for most filesystems at the moment.
> 
> If the block size > page size, this will send the contents of the page
> next to zero page(as len > PAGE_SIZE) to the underlying block device,
> causing FS corruption.
> 
> iomap is a generic infrastructure and it should not make any assumptions
> about the fs block size and the page size of the system.
> 
> Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
> Reviewed-by: Hannes Reinecke <hare@suse.de>
> ---
>  fs/internal.h          |  5 +++++
>  fs/iomap/buffered-io.c |  6 ++++++
>  fs/iomap/direct-io.c   | 26 ++++++++++++++++++++++++--
>  3 files changed, 35 insertions(+), 2 deletions(-)
> 
> diff --git a/fs/internal.h b/fs/internal.h
> index 84f371193f74..30217f0ff4c6 100644
> --- a/fs/internal.h
> +++ b/fs/internal.h
> @@ -35,6 +35,11 @@ static inline void bdev_cache_init(void)
>  int __block_write_begin_int(struct folio *folio, loff_t pos, unsigned len,
>  		get_block_t *get_block, const struct iomap *iomap);
>  
> +/*
> + * iomap/direct-io.c
> + */
> +int iomap_dio_init(void);
> +
>  /*
>   * char_dev.c
>   */
> diff --git a/fs/iomap/buffered-io.c b/fs/iomap/buffered-io.c
> index 49938419fcc7..9f791db473e4 100644
> --- a/fs/iomap/buffered-io.c
> +++ b/fs/iomap/buffered-io.c
> @@ -1990,6 +1990,12 @@ EXPORT_SYMBOL_GPL(iomap_writepages);
>  
>  static int __init iomap_init(void)
>  {
> +	int ret;
> +
> +	ret = iomap_dio_init();
> +	if (ret)
> +		return ret;
> +
>  	return bioset_init(&iomap_ioend_bioset, 4 * (PAGE_SIZE / SECTOR_SIZE),
>  			   offsetof(struct iomap_ioend, io_bio),
>  			   BIOSET_NEED_BVECS);
> diff --git a/fs/iomap/direct-io.c b/fs/iomap/direct-io.c
> index f3b43d223a46..b95600b254a3 100644
> --- a/fs/iomap/direct-io.c
> +++ b/fs/iomap/direct-io.c
> @@ -27,6 +27,13 @@
>  #define IOMAP_DIO_WRITE		(1U << 30)
>  #define IOMAP_DIO_DIRTY		(1U << 31)
>  
> +/*
> + * Used for sub block zeroing in iomap_dio_zero()
> + */
> +#define ZERO_FSB_SIZE (65536)
> +#define ZERO_FSB_ORDER (get_order(ZERO_FSB_SIZE))
> +static struct page *zero_fs_block;

Er... zero_page_64k ?

Since it's a permanent allocation, can we also mark the memory ro?

> +
>  struct iomap_dio {
>  	struct kiocb		*iocb;
>  	const struct iomap_dio_ops *dops;
> @@ -52,6 +59,16 @@ struct iomap_dio {
>  	};
>  };
>  
> +int iomap_dio_init(void)
> +{
> +	zero_fs_block = alloc_pages(GFP_KERNEL | __GFP_ZERO, ZERO_FSB_ORDER);
> +
> +	if (!zero_fs_block)
> +		return -ENOMEM;
> +
> +	return 0;
> +}

Can't we just turn this into another fs_initcall() instead of exporting
it just so we can call it from iomap_init?  And maybe rename the
existing iomap_init to iomap_pagecache_init or something, for clarity's
sake?

--D

> +
>  static struct bio *iomap_dio_alloc_bio(const struct iomap_iter *iter,
>  		struct iomap_dio *dio, unsigned short nr_vecs, blk_opf_t opf)
>  {
> @@ -236,17 +253,22 @@ static void iomap_dio_zero(const struct iomap_iter *iter, struct iomap_dio *dio,
>  		loff_t pos, unsigned len)
>  {
>  	struct inode *inode = file_inode(dio->iocb->ki_filp);
> -	struct page *page = ZERO_PAGE(0);
>  	struct bio *bio;
>  
> +	/*
> +	 * Max block size supported is 64k
> +	 */
> +	WARN_ON_ONCE(len > ZERO_FSB_SIZE);
> +
>  	bio = iomap_dio_alloc_bio(iter, dio, 1, REQ_OP_WRITE | REQ_SYNC | REQ_IDLE);
>  	fscrypt_set_bio_crypt_ctx(bio, inode, pos >> inode->i_blkbits,
>  				  GFP_KERNEL);
> +
>  	bio->bi_iter.bi_sector = iomap_sector(&iter->iomap, pos);
>  	bio->bi_private = dio;
>  	bio->bi_end_io = iomap_dio_bio_end_io;
>  
> -	__bio_add_page(bio, page, len, 0);
> +	__bio_add_page(bio, zero_fs_block, len, 0);
>  	iomap_dio_submit_bio(iter, dio, bio, pos);
>  }
>  
> -- 
> 2.44.1
> 
>