From: ran xiaokai <ranxiaokai627@163.com>
To: ziy@nvidia.com
Cc: akpm@linux-foundation.org, david@redhat.com,
linux-kernel@vger.kernel.org, linux-mm@kvack.org,
mhocko@kernel.org, ran.xiaokai@zte.com.cn, v-songbaohua@oppo.com,
xu.xin16@zte.com.cn, yang.yang29@zte.com.cn
Subject: Re: [PATCH linux-next] mm: huge_memory: fix misused mapping_large_folio_support() for anon folios
Date: Wed, 5 Jun 2024 02:56:56 +0000 [thread overview]
Message-ID: <20240605025656.889177-1-ranxiaokai627@163.com> (raw)
In-Reply-To: <E30FDAA1-B4D4-41C9-993C-0AD5044F30C0@nvidia.com>
> On 4 Jun 2024, at 0:57, David Hildenbrand wrote:
>
> > On 04.06.24 07:47, xu.xin16@zte.com.cn wrote:
> >> From: Ran Xiaokai <ran.xiaokai@zte.com.cn>
> >>
> >> When I did a large folios split test, a WARNING
> >> "[ 5059.122759][ T166] Cannot split file folio to non-0 order"
> >> was triggered. But my test cases are only for anonmous folios.
> >> while mapping_large_folio_support() is only reasonable for page
> >> cache folios.
> >
> > Agreed.
> >
> > I wonder if mapping_large_folio_support() should either
> >
> > a) Complain if used for anon folios, so we can detect the wrong use more easily. (VM_WARN_ON_ONCE())
>
> This is much better.
>
> >
> > b) Return "true" for anonymous mappings, although that's more debatable.
>
> This might fix the warning here, but the function might get wrong uses easily.
yes, maybe we should rename mapping_large_folio_support() if we choose b).
> >
> >>
> >> In split_huge_page_to_list_to_order(), the folio passed to
> >> mapping_large_folio_support() maybe anonmous folio. The
> >> folio_test_anon() check is missing. So the split of the anonmous THP
> >> is failed. This is also the same for shmem_mapping(). We'd better add
> >> a check for both. But the shmem_mapping() in __split_huge_page() is
> >> not involved, as for anonmous folios, the end parameter is set to -1, so
> >> (head[i].index >= end) is always false. shmem_mapping() is not called.
> >>
> >> Using /sys/kernel/debug/split_huge_pages to verify this, with this
> >> patch, large anon THP is successfully split and the warning is ceased.
> >>
> >> Signed-off-by: Ran Xiaokai <ran.xiaokai@zte.com.cn>
> >> Cc: xu xin <xu.xin16@zte.com.cn>
> >> Cc: Yang Yang <yang.yang29@zte.com.cn>
> >> ---
> >> mm/huge_memory.c | 38 ++++++++++++++++++++------------------
> >> 1 file changed, 20 insertions(+), 18 deletions(-)
> >>
> >> diff --git a/mm/huge_memory.c b/mm/huge_memory.c
> >> index 317de2afd371..4c9c7e5ea20c 100644
> >> --- a/mm/huge_memory.c
> >> +++ b/mm/huge_memory.c
> >> @@ -3009,31 +3009,33 @@ int split_huge_page_to_list_to_order(struct page *page, struct list_head *list,
> >> if (new_order >= folio_order(folio))
> >> return -EINVAL;
> >>
> >> - /* Cannot split anonymous THP to order-1 */
> >> - if (new_order == 1 && folio_test_anon(folio)) {
> >> - VM_WARN_ONCE(1, "Cannot split to order-1 folio");
> >> - return -EINVAL;
> >> - }
> >> -
> >> if (new_order) {
> >> /* Only swapping a whole PMD-mapped folio is supported */
> >> if (folio_test_swapcache(folio))
> >> return -EINVAL;
> >> - /* Split shmem folio to non-zero order not supported */
> >> - if (shmem_mapping(folio->mapping)) {
> >> - VM_WARN_ONCE(1,
> >> - "Cannot split shmem folio to non-0 order");
> >> - return -EINVAL;
> >> - }
> >> - /* No split if the file system does not support large folio */
> >> - if (!mapping_large_folio_support(folio->mapping)) {
> >> - VM_WARN_ONCE(1,
> >> - "Cannot split file folio to non-0 order");
> >> - return -EINVAL;
> >> +
> >> + if (folio_test_anon(folio)) {
> >> + /* Cannot split anonymous THP to order-1 */
> >> + if (new_order == 1) {
> >> + VM_WARN_ONCE(1, "Cannot split to order-1 folio");
> >> + return -EINVAL;
> >> + }
> >> + } else {
> >> + /* Split shmem folio to non-zero order not supported */
> >> + if (shmem_mapping(folio->mapping)) {
> >> + VM_WARN_ONCE(1,
> >> + "Cannot split shmem folio to non-0 order");
> >> + return -EINVAL;
> >> + }
> >> + /* No split if the file system does not support large folio */
> >> + if (!mapping_large_folio_support(folio->mapping)) {
> >> + VM_WARN_ONCE(1,
> >> + "Cannot split file folio to non-0 order");
> >> + return -EINVAL;
> >> + }
> >> }
> >> }
> >
> > What about the following sequence:
> >
> > if (folio_test_anon(folio)) {
> > if (new_order == 1)
> > ...
> > } else if (new_order) {
> > if (shmem_mapping(...))
> > ...
> > ...
> > }
> >
> > if (folio_test_swapcache(folio) && new_order)
> > return -EINVAL;
> >
> > Should result in less churn and reduce indentation level.
>
> Yeah, this looks better to me.
>
> Best Regards,
> Yan, Zi
next prev parent reply other threads:[~2024-06-05 2:57 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-04 5:47 xu.xin16
2024-06-04 7:57 ` David Hildenbrand
2024-06-04 13:52 ` Zi Yan
2024-06-04 13:57 ` Zi Yan
2024-06-05 2:56 ` ran xiaokai [this message]
2024-06-05 2:20 ` ran xiaokai
2024-06-05 7:25 ` David Hildenbrand
2024-06-05 8:30 ` ran xiaokai
2024-06-05 8:33 ` David Hildenbrand
2024-06-05 9:06 ` Barry Song
[not found] ` <20240605095406.891512-1-ranxiaokai627@163.com>
2024-06-05 14:08 ` Zi Yan
[not found] ` <c110eb46-3c9d-40c3-ab16-5bd9f75b6501@redhat.com>
2024-06-06 1:34 ` Barry Song
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240605025656.889177-1-ranxiaokai627@163.com \
--to=ranxiaokai627@163.com \
--cc=akpm@linux-foundation.org \
--cc=david@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mhocko@kernel.org \
--cc=ran.xiaokai@zte.com.cn \
--cc=v-songbaohua@oppo.com \
--cc=xu.xin16@zte.com.cn \
--cc=yang.yang29@zte.com.cn \
--cc=ziy@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox