From: Roman Gushchin <roman.gushchin@linux.dev>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Muchun Song <muchun.song@linux.dev>,
Johannes Weiner <hannes@cmpxchg.org>,
Michal Hocko <mhocko@kernel.org>,
Shakeel Butt <shakeel.butt@linux.dev>,
Matthew Wilcox <willy@infradead.org>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org,
Roman Gushchin <roman.gushchin@linux.dev>
Subject: [PATCH v1 01/14] mm: memcg: introduce memcontrol-v1.c
Date: Tue, 28 May 2024 13:20:53 -0700 [thread overview]
Message-ID: <20240528202101.3099300-2-roman.gushchin@linux.dev> (raw)
In-Reply-To: <20240528202101.3099300-1-roman.gushchin@linux.dev>
This patch introduces the mm/memcontrol-v1.c source file which will be used for
all legacy (cgroup v1) memory cgroup code. It also introduces mm/memcontrol-v1.h
to keep declarations shared between mm/memcontrol.c and mm/memcontrol-v1.c.
As of now, let's compile it if CONFIG_MEMCG is set, similar to mm/memcontrol.c.
Later on it can be switched to use a separate config option, so that the legacy
code won't be compiled if not required.
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
---
mm/Makefile | 3 ++-
mm/memcontrol-v1.c | 3 +++
mm/memcontrol-v1.h | 7 +++++++
3 files changed, 12 insertions(+), 1 deletion(-)
create mode 100644 mm/memcontrol-v1.c
create mode 100644 mm/memcontrol-v1.h
diff --git a/mm/Makefile b/mm/Makefile
index 8fb85acda1b1c..124d4dea20351 100644
--- a/mm/Makefile
+++ b/mm/Makefile
@@ -26,6 +26,7 @@ KCOV_INSTRUMENT_page_alloc.o := n
KCOV_INSTRUMENT_debug-pagealloc.o := n
KCOV_INSTRUMENT_kmemleak.o := n
KCOV_INSTRUMENT_memcontrol.o := n
+KCOV_INSTRUMENT_memcontrol-v1.o := n
KCOV_INSTRUMENT_mmzone.o := n
KCOV_INSTRUMENT_vmstat.o := n
KCOV_INSTRUMENT_failslab.o := n
@@ -95,7 +96,7 @@ obj-$(CONFIG_NUMA) += memory-tiers.o
obj-$(CONFIG_DEVICE_MIGRATION) += migrate_device.o
obj-$(CONFIG_TRANSPARENT_HUGEPAGE) += huge_memory.o khugepaged.o
obj-$(CONFIG_PAGE_COUNTER) += page_counter.o
-obj-$(CONFIG_MEMCG) += memcontrol.o vmpressure.o
+obj-$(CONFIG_MEMCG) += memcontrol.o memcontrol-v1.o vmpressure.o
ifdef CONFIG_SWAP
obj-$(CONFIG_MEMCG) += swap_cgroup.o
endif
diff --git a/mm/memcontrol-v1.c b/mm/memcontrol-v1.c
new file mode 100644
index 0000000000000..a941446ba575b
--- /dev/null
+++ b/mm/memcontrol-v1.c
@@ -0,0 +1,3 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "memcontrol-v1.h"
diff --git a/mm/memcontrol-v1.h b/mm/memcontrol-v1.h
new file mode 100644
index 0000000000000..7c5f094755ff8
--- /dev/null
+++ b/mm/memcontrol-v1.h
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#ifndef __MM_MEMCONTROL_V1_H
+#define __MM_MEMCONTROL_V1_H
+
+
+#endif /* __MM_MEMCONTROL_V1_H */
--
2.45.1
next prev parent reply other threads:[~2024-05-28 20:21 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-28 20:20 [PATCH v1 00/14] mm: memcg: separate legacy cgroup v1 code and put under config option Roman Gushchin
2024-05-28 20:20 ` Roman Gushchin [this message]
2024-06-01 6:42 ` [PATCH v1 01/14] mm: memcg: introduce memcontrol-v1.c Shakeel Butt
2024-06-04 3:58 ` Roman Gushchin
2024-05-28 20:20 ` [PATCH v1 02/14] mm: memcg: move soft limit reclaim code to memcontrol-v1.c Roman Gushchin
2024-06-01 6:42 ` Shakeel Butt
2024-05-28 20:20 ` [PATCH v1 03/14] mm: memcg: rename soft limit reclaim-related functions Roman Gushchin
2024-06-01 6:43 ` Shakeel Butt
2024-05-28 20:20 ` [PATCH v1 04/14] mm: memcg: move charge migration code to memcontrol-v1.c Roman Gushchin
2024-06-01 6:44 ` Shakeel Butt
2024-05-28 20:20 ` [PATCH v1 05/14] mm: memcg: rename charge move-related functions Roman Gushchin
2024-06-01 6:45 ` Shakeel Butt
2024-05-28 20:20 ` [PATCH v1 06/14] mm: memcg: move legacy memcg event code into memcontrol-v1.c Roman Gushchin
2024-06-01 6:33 ` Shakeel Butt
2024-06-04 3:57 ` Roman Gushchin
2024-06-01 6:45 ` Shakeel Butt
2024-05-28 20:20 ` [PATCH v1 07/14] mm: memcg: rename memcg_check_events() Roman Gushchin
2024-06-01 6:39 ` Shakeel Butt
2024-06-01 6:46 ` Shakeel Butt
2024-05-28 20:21 ` [PATCH v1 08/14] mm: memcg: move cgroup v1 oom handling code into memcontrol-v1.c Roman Gushchin
2024-06-01 6:46 ` Shakeel Butt
2024-06-01 6:47 ` Shakeel Butt
2024-05-28 20:21 ` [PATCH v1 09/14] mm: memcg: rename memcg_oom_recover() Roman Gushchin
2024-06-01 6:48 ` Shakeel Butt
2024-05-28 21:44 ` [PATCH v1 10/14] mm: memcg: move cgroup v1 interface files to memcontrol-v1.c Roman Gushchin
2024-05-28 21:44 ` [PATCH v1 11/14] mm: memcg: make memcg1_update_tree() static Roman Gushchin
2024-06-01 6:48 ` Shakeel Butt
2024-05-28 21:44 ` [PATCH v1 12/14] mm: memcg: group cgroup v1 memcg related declarations Roman Gushchin
2024-06-01 6:49 ` Shakeel Butt
2024-05-28 21:44 ` [PATCH v1 13/14] mm: memcg: put cgroup v1-related members of task_struct under config option Roman Gushchin
2024-06-01 6:51 ` Shakeel Butt
2024-06-02 12:00 ` Lance Yang
2024-06-03 19:13 ` Roman Gushchin
2024-05-28 21:44 ` [PATCH v1 14/14] MAINTAINERS: add mm/memcontrol-v1.c/h to the list of maintained files Roman Gushchin
2024-06-01 6:53 ` Shakeel Butt
2024-06-01 6:48 ` [PATCH v1 10/14] mm: memcg: move cgroup v1 interface files to memcontrol-v1.c Shakeel Butt
2024-06-03 19:34 ` [PATCH v1 00/14] mm: memcg: separate legacy cgroup v1 code and put under config option Roman Gushchin
2024-06-07 15:29 ` Shakeel Butt
2024-06-07 16:13 ` Roman Gushchin
2024-06-24 22:00 ` Shakeel Butt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240528202101.3099300-2-roman.gushchin@linux.dev \
--to=roman.gushchin@linux.dev \
--cc=akpm@linux-foundation.org \
--cc=hannes@cmpxchg.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mhocko@kernel.org \
--cc=muchun.song@linux.dev \
--cc=shakeel.butt@linux.dev \
--cc=willy@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox