* kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
@ 2024-05-08 18:21 Erhard Furtner
2024-05-15 20:45 ` Erhard Furtner
0 siblings, 1 reply; 45+ messages in thread
From: Erhard Furtner @ 2024-05-08 18:21 UTC (permalink / raw)
To: linux-mm; +Cc: linux-kernel, linuxppc-dev
[-- Attachment #1: Type: text/plain, Size: 4286 bytes --]
Greetings!
Got that on my dual CPU PowerMac G4 DP shortly after boot. This does not happen every time at bootup though:
[...]
kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0
CPU: 1 PID: 40 Comm: kswapd0 Not tainted 6.8.9-gentoo-PMacG4 #1
Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
Call Trace:
[effe5cc0] [c0784b64] dump_stack_lvl+0x80/0xac (unreliable)
[effe5ce0] [c01aef80] warn_alloc+0x100/0x178
[effe5d40] [c01af34c] __alloc_pages+0x354/0x8ac
[effe5e00] [c01af988] page_frag_alloc_align+0x68/0x17c
[effe5e30] [c063b7b4] __netdev_alloc_skb+0xb4/0x17c
[effe5e60] [be99573c] setup_rx_descbuffer+0x40/0x144 [b43legacy]
[effe5e90] [be99687c] b43legacy_dma_rx+0x20c/0x278 [b43legacy]
[effe5ee0] [be9897f4] b43legacy_interrupt_tasklet+0x580/0x5a4 [b43legacy]
[effe5f50] [c0050b34] tasklet_action_common.isra.0+0xb0/0xe8
[effe5f80] [c07aaf5c] __do_softirq+0x1dc/0x218
[effe5ff0] [c0008820] do_softirq_own_stack+0x34/0x40
[c1c555f0] [c07ff5f0] 0xc07ff5f0
[c1c55610] [c0050384] __irq_exit_rcu+0x6c/0xbc
[c1c55620] [c00507f8] irq_exit+0x10/0x20
[c1c55630] [c00045b4] HardwareInterrupt_virt+0x108/0x10c
--- interrupt: 500 at BIT_flushBits+0x1c/0x58
NIP: c0458840 LR: c0458fdc CTR: 00000000
REGS: c1c55640 TRAP: 0500 Not tainted (6.8.9-gentoo-PMacG4)
MSR: 0220b032 <VEC,EE,FP,ME,IR,DR,RI> CR: 88082202 XER: 00000000
GPR00: c0458f98 c1c55700 c1c2b9a0 c1c5575c 00000000 00000000 00000000 00000000
GPR08: 00000000 00000000 f2c1d0d5 c1c55710 88084202 00000000 f2c1e000 f35f8150
GPR16: 00000000 f34bf238 f34bf30c 00000000 0000001b 00000002 00000000 00000000
GPR24: f35f8150 00000080 f35f7950 f35f7d50 00000000 c07ff5f0 00000052 f35f5be0
NIP [c0458840] BIT_flushBits+0x1c/0x58
LR [c0458fdc] ZSTD_encodeSequences+0x2ac/0x308
--- interrupt: 500
[c1c55700] [c07ff5f0] 0xc07ff5f0 (unreliable)
[c1c55710] [c0458f98] ZSTD_encodeSequences+0x268/0x308
[c1c557b0] [c0452eb0] ZSTD_entropyCompressSeqStore.constprop.0+0x1c4/0x2bc
[c1c55840] [c045357c] ZSTD_compressBlock_internal+0xac/0x144
[c1c55870] [c04543c8] ZSTD_compressContinue_internal+0x734/0x7c0
[c1c55920] [c04559d4] ZSTD_compressEnd+0x2c/0x13c
[c1c55950] [c04574b0] ZSTD_compressStream2+0x1b8/0x508
[c1c559a0] [c045788c] ZSTD_compressStream2_simpleArgs+0x48/0x60
[c1c559e0] [c0457904] ZSTD_compress2+0x60/0x90
[c1c55a10] [c03d0abc] __zstd_compress+0x54/0x78
[c1c55a70] [c03c3794] scomp_acomp_comp_decomp+0xe8/0x16c
[c1c55aa0] [c01c4c80] zswap_store+0x4b4/0x668
[c1c55b20] [c01bc404] swap_writepage+0x3c/0xa8
[c1c55b40] [c0172dd4] pageout+0x11c/0x1ec
[c1c55bc0] [c0174e2c] shrink_folio_list+0x6b0/0x878
[c1c55c40] [c01767e8] evict_folios+0x9d4/0xd08
[c1c55d40] [c0176cec] try_to_shrink_lruvec+0x1d0/0x210
[c1c55da0] [c0176dcc] shrink_one+0xa0/0x134
[c1c55dd0] [c01786a4] shrink_node+0x248/0x844
[c1c55e50] [c0178f68] balance_pgdat+0x2c8/0x614
[c1c55f50] [c01794cc] kswapd+0x218/0x24c
[c1c55fc0] [c006aae4] kthread+0xe4/0xe8
[c1c55ff0] [c0015304] start_kernel_thread+0x10/0x14
Mem-Info:
active_anon:247864 inactive_anon:215615 isolated_anon:0
active_file:9633 inactive_file:12323 isolated_file:0
unevictable:4 dirty:0 writeback:2
slab_reclaimable:1293 slab_unreclaimable:6904
mapped:16876 shmem:155 pagetables:899
sec_pagetables:0 bounce:0
kernel_misc_reclaimable:0
free:2224 free_pcp:596 free_cma:0
Node 0 active_anon:991456kB inactive_anon:862460kB active_file:38532kB inactive_file:49292kB unevictable:16kB isolated(anon):0kB isolated(file):0kB mapped:67504kB dirty:0kB writeback:8kB shmem:620kB writeback_tmp:0kB kernel_stack:1536kB pagetables:3596kB sec_pagetables:0kB all_unreclaimable? no
DMA free:1680kB boost:4096kB min:7548kB low:8408kB high:9268kB reserved_highatomic:0KB active_anon:675928kB inactive_anon:5644kB active_file:124kB inactive_file:596kB unevictable:0kB writepending:0kB present:786432kB managed:746656kB mlocked:0kB bounce:0kB free_pcp:2384kB local_pcp:1004kB free_cma:0kB
lowmem_reserve[]: 0 0 1280 1280
DMA: 2*4kB (UM) 1*8kB (U) 1*16kB (U) 18*32kB (UME) 7*64kB (UM) 0*128kB 1*256kB (M) 1*512kB (M) 0*1024kB 0*2048kB 0*4096kB = 1824kB
35907 total pagecache pages
13813 pages in swap cache
Free swap = 8270180kB
[...]
There was no crash though, the G4 was still usable via VNC.
Full dmesg and kernel .config attached.
Regards,
Erhard
[-- Attachment #2: config_689_g4 --]
[-- Type: application/octet-stream, Size: 116560 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/powerpc 6.8.9-gentoo Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="gcc (Gentoo 13.2.1_p20240210 p14) 13.2.1 20240210"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=130201
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=24200
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=24200
CONFIG_LLD_VERSION=0
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_GOTO_TIED_OUTPUT=y
CONFIG_GCC_ASM_GOTO_OUTPUT_WORKAROUND=y
CONFIG_TOOLS_SUPPORT_RELR=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=0
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION="-PMacG4"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_XZ is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_WATCH_QUEUE=y
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_DOMAIN_NOMAP=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_TIME_KUNIT_TEST=m
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem
CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y
#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
CONFIG_BPF_JIT=y
CONFIG_BPF_JIT_ALWAYS_ON=y
CONFIG_BPF_JIT_DEFAULT_ON=y
CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
# CONFIG_BPF_PRELOAD is not set
# end of BPF subsystem
CONFIG_PREEMPT_VOLUNTARY_BUILD=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting
CONFIG_CPU_ISOLATION=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_TREE_SRCU=y
CONFIG_NEED_SRCU_NMI_SAFE=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem
# CONFIG_IKCONFIG is not set
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=16
CONFIG_LOG_CPU_MAX_BUF_SHIFT=13
# CONFIG_PRINTK_INDEX is not set
#
# Scheduler features
#
# CONFIG_SCHED_ALT is not set
# end of Scheduler features
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC10_NO_ARRAY_BOUNDS=y
CONFIG_CC_NO_ARRAY_BOUNDS=y
CONFIG_GCC_NO_STRINGOP_OVERFLOW=y
CONFIG_CC_NO_STRINGOP_OVERFLOW=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
# CONFIG_CGROUP_FAVOR_DYNMODS is not set
CONFIG_MEMCG=y
CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_SCHED_MM_CID=y
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
CONFIG_CGROUP_MISC=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_TIME_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
# CONFIG_RD_ZSTD is not set
# CONFIG_BOOT_CONFIG is not set
# CONFIG_INITRAMFS_PRESERVE_MTIME is not set
# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
# CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_LD_ORPHAN_WARN_LEVEL="warn"
CONFIG_SYSCTL=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_EXPERT=y
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
# CONFIG_SYSFS_SYSCALL is not set
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KCMP=y
CONFIG_RSEQ=y
# CONFIG_DEBUG_RSEQ is not set
CONFIG_CACHESTAT_SYSCALL=y
# CONFIG_PC104 is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_SELFTEST is not set
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_ARCH_HAS_MEMBARRIER_CALLBACKS=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# end of Kernel Performance Events And Counters
CONFIG_SYSTEM_DATA_VERIFICATION=y
# CONFIG_PROFILING is not set
#
# Kexec and crash features
#
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
# end of Kexec and crash features
# end of General setup
CONFIG_PPC32=y
# CONFIG_PPC64 is not set
#
# Processor support
#
CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_PPC_BOOK3S_603 is not set
CONFIG_PPC_BOOK3S_604=y
# CONFIG_POWERPC_CPU is not set
# CONFIG_E300C2_CPU is not set
# CONFIG_E300C3_CPU is not set
CONFIG_G4_CPU=y
# CONFIG_TOOLCHAIN_DEFAULT_CPU is not set
CONFIG_TARGET_CPU_BOOL=y
CONFIG_TARGET_CPU="G4"
CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU_REGS=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_KUEP=y
CONFIG_PPC_KUAP=y
# CONFIG_PPC_KUAP_DEBUG is not set
CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_PMU_SYSFS is not set
CONFIG_PPC_PERF_CTRS=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
# end of Processor support
CONFIG_VDSO32=y
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_32BIT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MAX=17
CONFIG_ARCH_MMAP_RND_BITS_MIN=11
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
CONFIG_NR_IRQS=512
CONFIG_NMI_IPI=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_PANIC_TIMEOUT=40
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_TBSYNC=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_HAS_ADD_PAGES=y
# CONFIG_PPC_PCI_OF_BUS_MAP is not set
CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PPC_MSI_BITMAP=y
#
# Platform support
#
# CONFIG_SCOM_DEBUGFS is not set
# CONFIG_PPC_CHRP is not set
# CONFIG_PPC_MPC512x is not set
# CONFIG_PPC_MPC52xx is not set
CONFIG_PPC_PMAC=y
CONFIG_PPC_PMAC32_PSURGE=y
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
CONFIG_KVM_GUEST=y
CONFIG_EPAPR_PARAVIRT=y
CONFIG_PPC_HASH_MMU_NATIVE=y
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_PPC_SMP_MUXED_IPI=y
CONFIG_MPIC=y
CONFIG_MPIC_MSGR=y
CONFIG_PPC_MPC106=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set
#
# CPU frequency scaling drivers
#
# CONFIG_CPUFREQ_DT_PLATDEV is not set
CONFIG_CPU_FREQ_PMAC=y
# end of CPU Frequency scaling
#
# CPUIdle driver
#
#
# CPU Idle
#
# CONFIG_CPU_IDLE is not set
# end of CPU Idle
# end of CPUIdle driver
CONFIG_TAU=y
# CONFIG_TAU_INT is not set
# CONFIG_TAU_AVERAGE is not set
# CONFIG_GEN_RTC is not set
# end of Platform support
#
# Kernel options
#
CONFIG_HIGHMEM=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
CONFIG_HOTPLUG_CPU=y
# CONFIG_PPC_QUEUED_SPINLOCKS is not set
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_ARCH_SUPPORTS_KEXEC=y
CONFIG_ARCH_SUPPORTS_KEXEC_PURGATORY=y
CONFIG_ARCH_SUPPORTS_CRASH_DUMP=y
CONFIG_IRQ_ALL_CPUS=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_PPC_4K_PAGES=y
CONFIG_PAGE_SIZE_4KB=y
CONFIG_PPC_PAGE_SHIFT=12
CONFIG_THREAD_SHIFT=13
CONFIG_DATA_SHIFT=22
CONFIG_ARCH_FORCE_MAX_ORDER=10
CONFIG_CMDLINE=""
CONFIG_EXTRA_TARGETS=""
CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_APM_EMULATION=m
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
# CONFIG_ENERGY_MODEL is not set
# end of Kernel options
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
# CONFIG_FSL_LBC is not set
# end of Bus options
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xb0000000
# end of Advanced setup
# CONFIG_VIRTUALIZATION is not set
CONFIG_HAVE_LIVEPATCH=y
CONFIG_CPU_MITIGATIONS=y
#
# General architecture-dependent options
#
CONFIG_HOTPLUG_SMT=y
CONFIG_SMT_NUM_THREADS_DYNAMIC=y
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_STATIC_CALL_SELFTEST is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_MMU_GATHER_PAGE_SIZE=y
CONFIG_MMU_GATHER_MERGE_VMAS=y
CONFIG_ARCH_WANT_IRQS_OFF_ACTIVATE_MM=y
CONFIG_MMU_LAZY_TLB_REFCOUNT=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
# CONFIG_SECCOMP_CACHE_DEBUG is not set
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
# CONFIG_STACKPROTECTOR_STRONG is not set
CONFIG_LTO_NONE=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING_USER=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOC=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_ARCH_MMAP_RND_BITS=11
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y
CONFIG_HAVE_OBJTOOL=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_HAVE_ARCH_NVRAM_OPS=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND=y
CONFIG_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
# CONFIG_VMAP_STACK is not set
CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT=y
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
# CONFIG_STRICT_MODULE_RWX is not set
CONFIG_ARCH_HAS_PHYS_TO_DMA=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_HAVE_STATIC_CALL=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SPLIT_ARG64=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling
CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_GCC_PLUGINS=y
CONFIG_GCC_PLUGIN_LATENT_ENTROPY=y
CONFIG_FUNCTION_ALIGNMENT_4B=y
CONFIG_FUNCTION_ALIGNMENT=4
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_DEBUG is not set
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODULE_UNLOAD_TAINT_TRACKING is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
CONFIG_MODPROBE_PATH="/sbin/modprobe"
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
CONFIG_BLK_CGROUP_RWSTAT=y
CONFIG_BLK_CGROUP_PUNT_BIO=y
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_ICQ=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_WRITE_MOUNTED is not set
# CONFIG_BLK_DEV_ZONED is not set
# CONFIG_BLK_DEV_THROTTLING is not set
CONFIG_BLK_WBT=y
CONFIG_BLK_WBT_MQ=y
# CONFIG_BLK_CGROUP_IOLATENCY is not set
# CONFIG_BLK_CGROUP_IOCOST is not set
# CONFIG_BLK_CGROUP_IOPRIO is not set
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set
# CONFIG_BLK_INLINE_ENCRYPTION is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
CONFIG_BLK_MQ_STACKING=y
#
# IO Schedulers
#
# CONFIG_MQ_IOSCHED_DEADLINE is not set
# CONFIG_MQ_IOSCHED_KYBER is not set
CONFIG_IOSCHED_BFQ=y
CONFIG_BFQ_GROUP_IOSCHED=y
# CONFIG_BFQ_CGROUP_DEBUG is not set
# end of IO Schedulers
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#
CONFIG_ZPOOL=y
CONFIG_SWAP=y
CONFIG_ZSWAP=y
CONFIG_ZSWAP_DEFAULT_ON=y
CONFIG_ZSWAP_EXCLUSIVE_LOADS_DEFAULT_ON=y
CONFIG_ZSWAP_SHRINKER_DEFAULT_ON=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD=y
CONFIG_ZSWAP_COMPRESSOR_DEFAULT="zstd"
# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD is not set
# CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set
CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC=y
CONFIG_ZSWAP_ZPOOL_DEFAULT="zsmalloc"
# CONFIG_ZBUD is not set
# CONFIG_Z3FOLD is not set
CONFIG_ZSMALLOC=y
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_ZSMALLOC_CHAIN_SIZE=8
#
# Slab allocator options
#
CONFIG_SLUB=y
# CONFIG_SLUB_TINY is not set
# CONFIG_SLAB_MERGE_DEFAULT is not set
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLAB_FREELIST_HARDENED=y
# CONFIG_SLUB_STATS is not set
# CONFIG_SLUB_CPU_PARTIAL is not set
CONFIG_RANDOM_KMALLOC_CACHES=y
# end of Slab allocator options
CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
# CONFIG_COMPAT_BRK is not set
CONFIG_FLATMEM=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_ARCH_KEEP_MEMBLOCK=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_PCP_BATCH_SCALE_MAX=5
CONFIG_BOUNCE=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=16384
# CONFIG_CMA is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ZONE_DMA=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not set
# CONFIG_DMAPOOL_TEST is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_KMAP_LOCAL=y
CONFIG_MEMFD_CREATE=y
# CONFIG_ANON_VMA_NAME is not set
CONFIG_USERFAULTFD=y
CONFIG_LRU_GEN=y
CONFIG_LRU_GEN_ENABLED=y
# CONFIG_LRU_GEN_STATS is not set
CONFIG_LOCK_MM_AND_FIND_VMA=y
#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options
CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_NET_XGRESS=y
CONFIG_SKB_EXTENSIONS=y
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
CONFIG_UNIX_DIAG=m
CONFIG_TLS=m
CONFIG_TLS_DEVICE=y
# CONFIG_TLS_TOE is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=m
CONFIG_XFRM_USER=m
# CONFIG_XFRM_INTERFACE is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_AH=m
CONFIG_XFRM_ESP=m
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
# CONFIG_XDP_SOCKETS is not set
CONFIG_NET_HANDSHAKE=y
# CONFIG_NET_HANDSHAKE_KUNIT_TEST is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=m
CONFIG_SYN_COOKIES=y
# CONFIG_NET_IPVTI is not set
CONFIG_NET_UDP_TUNNEL=m
# CONFIG_NET_FOU is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
# CONFIG_INET_ESP_OFFLOAD is not set
# CONFIG_INET_ESPINTCP is not set
CONFIG_INET_IPCOMP=m
CONFIG_INET_TABLE_PERTURB_ORDER=16
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
# CONFIG_TCP_CONG_CUBIC is not set
CONFIG_TCP_CONG_WESTWOOD=y
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_NV is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_TCP_CONG_DCTCP is not set
# CONFIG_TCP_CONG_CDG is not set
# CONFIG_TCP_CONG_BBR is not set
CONFIG_DEFAULT_WESTWOOD=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="westwood"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
# CONFIG_INET6_ESP_OFFLOAD is not set
# CONFIG_INET6_ESPINTCP is not set
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
# CONFIG_IPV6_VTI is not set
# CONFIG_IPV6_SIT is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_IPV6_RPL_LWTUNNEL is not set
# CONFIG_IPV6_IOAM6_LWTUNNEL is not set
# CONFIG_NETLABEL is not set
# CONFIG_MPTCP is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_COOKIE_HMAC_SHA1 is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_BRIDGE_MRP is not set
# CONFIG_BRIDGE_CFM is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_CBS is not set
# CONFIG_NET_SCH_ETF is not set
# CONFIG_NET_SCH_TAPRIO is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_SKBPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
# CONFIG_NET_SCH_CODEL is not set
CONFIG_NET_SCH_FQ_CODEL=y
# CONFIG_NET_SCH_CAKE is not set
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
# CONFIG_NET_SCH_PLUG is not set
# CONFIG_NET_SCH_ETS is not set
CONFIG_NET_SCH_DEFAULT=y
CONFIG_DEFAULT_FQ_CODEL=y
# CONFIG_DEFAULT_PFIFO_FAST is not set
CONFIG_DEFAULT_NET_SCH="fq_codel"
#
# Classification
#
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_CLS_CGROUP is not set
# CONFIG_NET_CLS_BPF is not set
# CONFIG_NET_CLS_FLOWER is not set
# CONFIG_NET_CLS_MATCHALL is not set
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
CONFIG_VSOCKETS=m
CONFIG_VSOCKETS_DIAG=m
# CONFIG_VSOCKETS_LOOPBACK is not set
# CONFIG_VIRTIO_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_NET_NSH is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_QRTR is not set
# CONFIG_NET_NCSI is not set
CONFIG_PCPU_DEV_REFCNT=y
CONFIG_MAX_SKB_FRAGS=17
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_STREAM_PARSER=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# end of Network testing
# end of Networking options
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
CONFIG_BT=m
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
CONFIG_BT_LE=y
CONFIG_BT_LE_L2CAP_ECRED=y
# CONFIG_BT_LEDS is not set
CONFIG_BT_MSFTEXT=y
CONFIG_BT_AOSPEXT=y
CONFIG_BT_DEBUGFS=y
# CONFIG_BT_SELFTEST is not set
CONFIG_BT_FEATURE_DEBUG=y
#
# Bluetooth device drivers
#
CONFIG_BT_INTEL=m
CONFIG_BT_BCM=m
CONFIG_BT_RTL=m
CONFIG_BT_MTK=m
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
CONFIG_BT_HCIBTUSB_POLL_SYNC=y
CONFIG_BT_HCIBTUSB_BCM=y
CONFIG_BT_HCIBTUSB_MTK=y
CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_AG6XX=y
CONFIG_BT_HCIBCM203X=m
# CONFIG_BT_HCIBCM4377 is not set
# CONFIG_BT_HCIBPA10X is not set
CONFIG_BT_HCIBFUSB=m
# CONFIG_BT_HCIDTL1 is not set
# CONFIG_BT_HCIBT3C is not set
# CONFIG_BT_HCIBLUECARD is not set
# CONFIG_BT_HCIVHCI is not set
CONFIG_BT_MRVL=m
CONFIG_BT_ATH3K=m
# CONFIG_BT_VIRTIO is not set
# end of Bluetooth device drivers
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_STREAM_PARSER=y
# CONFIG_MCTP is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
# CONFIG_CFG80211_WEXT is not set
CONFIG_CFG80211_KUNIT_TEST=m
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_KUNIT_TEST=m
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
# CONFIG_RFKILL_INPUT is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_FD=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_SOCK_VALIDATE_XMIT=y
CONFIG_NET_SOCK_MSG=y
CONFIG_PAGE_POOL=y
# CONFIG_PAGE_POOL_STATS is not set
CONFIG_FAILOVER=y
CONFIG_ETHTOOL_NETLINK=y
CONFIG_NETDEV_ADDR_LIST_TEST=m
CONFIG_NET_TEST=m
#
# Device Drivers
#
CONFIG_HAVE_PCI=y
CONFIG_FORCE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCIEASPM is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_ARCH_FALLBACKS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_PCI_DYNAMIC_OF_NODES=y
# CONFIG_PCIE_BUS_TUNE_OFF is not set
CONFIG_PCIE_BUS_DEFAULT=y
# CONFIG_PCIE_BUS_SAFE is not set
# CONFIG_PCIE_BUS_PERFORMANCE is not set
# CONFIG_PCIE_BUS_PEER2PEER is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=4
# CONFIG_HOTPLUG_PCI is not set
#
# PCI controller drivers
#
# CONFIG_PCI_FTPCI100 is not set
# CONFIG_PCI_HOST_GENERIC is not set
# CONFIG_PCIE_MICROCHIP_HOST is not set
# CONFIG_PCIE_XILINX is not set
#
# Cadence-based PCIe controllers
#
# CONFIG_PCIE_CADENCE_PLAT_HOST is not set
# end of Cadence-based PCIe controllers
#
# DesignWare-based PCIe controllers
#
# CONFIG_PCI_MESON is not set
# CONFIG_PCIE_DW_PLAT_HOST is not set
# end of DesignWare-based PCIe controllers
#
# Mobiveil-based PCIe controllers
#
# end of Mobiveil-based PCIe controllers
# end of PCI controller drivers
#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint
#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers
# CONFIG_CXL_BUS is not set
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
# CONFIG_PCMCIA_LOAD_CIS is not set
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=y
# CONFIG_YENTA_O2 is not set
# CONFIG_YENTA_RICOH is not set
# CONFIG_YENTA_TI is not set
# CONFIG_YENTA_TOSHIBA is not set
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=y
# CONFIG_RAPIDIO is not set
#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_DEVTMPFS_SAFE=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
CONFIG_FW_LOADER_COMPRESS=y
# CONFIG_FW_LOADER_COMPRESS_XZ is not set
CONFIG_FW_LOADER_COMPRESS_ZSTD=y
# CONFIG_FW_UPLOAD is not set
# end of Firmware loader
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_DM_KUNIT_TEST=m
CONFIG_DRIVER_PE_KUNIT_TEST=m
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_KUNIT=m
# CONFIG_REGMAP_BUILD is not set
CONFIG_REGMAP_RAM=m
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_DMA_FENCE_TRACE=y
# CONFIG_FW_DEVLINK_SYNC_STATE_TIMEOUT is not set
# end of Generic Driver Options
#
# Bus devices
#
# CONFIG_MHI_BUS is not set
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices
#
# Cache Drivers
#
# end of Cache Drivers
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
#
# Firmware Drivers
#
#
# ARM System Control and Management Interface Protocol
#
# end of ARM System Control and Management Interface Protocol
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_FW_CFG_SYSFS=m
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# Qualcomm firmware drivers
#
# end of Qualcomm firmware drivers
#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers
# CONFIG_GNSS is not set
# CONFIG_MTD is not set
CONFIG_DTC=y
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
# CONFIG_OF_OVERLAY is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_FD is not set
# CONFIG_MAC_FLOPPY is not set
CONFIG_CDROM=y
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_ZRAM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_UBLK is not set
#
# NVME Support
#
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_NVME_FC is not set
# CONFIG_NVME_TCP is not set
# CONFIG_NVME_TARGET is not set
# end of NVME Support
#
# Misc devices
#
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_PHANTOM is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_SRAM is not set
# CONFIG_DW_XDATA_PCIE is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
# CONFIG_OPEN_DICE is not set
# CONFIG_VCPU_STALL_DETECTOR is not set
# CONFIG_NSM is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support
# CONFIG_CB710_CORE is not set
#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline
# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_ALTERA_STAPL is not set
# CONFIG_ECHO is not set
# CONFIG_BCM_VK is not set
# CONFIG_MISC_ALCOR_PCI is not set
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_MISC_RTSX_USB is not set
CONFIG_PVPANIC=y
CONFIG_PVPANIC_MMIO=m
CONFIG_PVPANIC_PCI=m
# end of Misc devices
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=m
CONFIG_BLK_DEV_BSG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# end of SCSI Transports
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_MPI3MR is not set
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FDOMAIN_PCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_WD719X is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_MESH is not set
# CONFIG_SCSI_MAC53C94 is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
CONFIG_SCSI_VIRTIO=y
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# end of SCSI device support
CONFIG_ATA=y
CONFIG_SATA_HOST=y
CONFIG_ATA_VERBOSE_ERROR=y
# CONFIG_ATA_FORCE is not set
# CONFIG_SATA_PMP is not set
#
# Controllers with non-SFF native interface
#
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_AHCI_DWC is not set
# CONFIG_AHCI_CEVA is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
CONFIG_SATA_SIL=y
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
CONFIG_PATA_MACIO=y
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_OF_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
# CONFIG_MD_BITMAP_FILE is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=m
CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING=y
# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_UNSTRIPED is not set
CONFIG_DM_CRYPT=m
# CONFIG_DM_SNAPSHOT is not set
CONFIG_DM_THIN_PROVISIONING=m
# CONFIG_DM_CACHE is not set
# CONFIG_DM_WRITECACHE is not set
# CONFIG_DM_ERA is not set
# CONFIG_DM_CLONE is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_RAID is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_DUST is not set
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_DM_LOG_WRITES is not set
# CONFIG_DM_INTEGRITY is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_KUNIT_UAPI_TEST=m
CONFIG_FIREWIRE_KUNIT_DEVICE_ATTRIBUTE_TEST=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_ADB=y
# CONFIG_ADB_CUDA is not set
CONFIG_ADB_PMU=y
CONFIG_ADB_PMU_EVENT=y
CONFIG_ADB_PMU_LED=y
# CONFIG_ADB_PMU_LED_DISK is not set
CONFIG_PMAC_APM_EMU=m
CONFIG_PMAC_MEDIABAY=y
# CONFIG_PMAC_BACKLIGHT is not set
CONFIG_INPUT_ADBHID=y
CONFIG_MAC_EMUMOUSEBTN=m
CONFIG_THERM_WINDTUNNEL=m
CONFIG_THERM_ADT746X=m
CONFIG_WINDFARM=m
# CONFIG_PMAC_RACKMETER is not set
CONFIG_SENSORS_AMS=m
CONFIG_SENSORS_AMS_PMU=y
CONFIG_SENSORS_AMS_I2C=y
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
CONFIG_WIREGUARD=m
# CONFIG_WIREGUARD_DEBUG is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_GENEVE is not set
# CONFIG_BAREUDP is not set
# CONFIG_GTP is not set
# CONFIG_MACSEC is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_EXTENDED_LOG is not set
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
CONFIG_VIRTIO_NET=y
# CONFIG_NLMON is not set
# CONFIG_NETKIT is not set
CONFIG_SUNGEM_PHY=y
# CONFIG_ARCNET is not set
CONFIG_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_AGERE is not set
# CONFIG_NET_VENDOR_ALACRITECH is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
# CONFIG_NET_VENDOR_AMAZON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_APPLE is not set
# CONFIG_NET_VENDOR_AQUANTIA is not set
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_ASIX is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CADENCE is not set
# CONFIG_NET_VENDOR_CAVIUM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_NET_VENDOR_CORTINA is not set
# CONFIG_NET_VENDOR_DAVICOM is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_ENGLEDER is not set
# CONFIG_NET_VENDOR_EZCHIP is not set
# CONFIG_NET_VENDOR_FUJITSU is not set
# CONFIG_NET_VENDOR_FUNGIBLE is not set
# CONFIG_NET_VENDOR_GOOGLE is not set
# CONFIG_NET_VENDOR_HUAWEI is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_JME is not set
# CONFIG_NET_VENDOR_LITEX is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_MICROSEMI is not set
# CONFIG_NET_VENDOR_MICROSOFT is not set
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NI is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NETERION is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_VENDOR_PACKET_ENGINES is not set
# CONFIG_NET_VENDOR_PENSANDO is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
# CONFIG_NET_VENDOR_BROCADE is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_RDC is not set
# CONFIG_NET_VENDOR_REALTEK is not set
# CONFIG_NET_VENDOR_RENESAS is not set
# CONFIG_NET_VENDOR_ROCKER is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_NET_VENDOR_SOLARFLARE is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_SOCIONEXT is not set
# CONFIG_NET_VENDOR_STMICRO is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
CONFIG_SUNGEM=y
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VERTEXCOM is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WANGXUN is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_NET_VENDOR_XILINX is not set
# CONFIG_NET_VENDOR_XIRCOM is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PHYLIB is not set
# CONFIG_PSE_CONTROLLER is not set
# CONFIG_MDIO_DEVICE is not set
#
# PCS device drivers
#
# end of PCS device drivers
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_USB_NET_DRIVERS is not set
CONFIG_WLAN=y
# CONFIG_WLAN_VENDOR_ADMTEK is not set
# CONFIG_WLAN_VENDOR_ATH is not set
# CONFIG_WLAN_VENDOR_ATMEL is not set
CONFIG_WLAN_VENDOR_BROADCOM=y
# CONFIG_B43 is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not set
# CONFIG_WLAN_VENDOR_INTEL is not set
# CONFIG_WLAN_VENDOR_INTERSIL is not set
# CONFIG_WLAN_VENDOR_MARVELL is not set
# CONFIG_WLAN_VENDOR_MEDIATEK is not set
# CONFIG_WLAN_VENDOR_MICROCHIP is not set
# CONFIG_WLAN_VENDOR_PURELIFI is not set
# CONFIG_WLAN_VENDOR_RALINK is not set
CONFIG_WLAN_VENDOR_REALTEK=y
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_RTL_CARDS is not set
CONFIG_RTL8XXXU=m
# CONFIG_RTL8XXXU_UNTESTED is not set
# CONFIG_RTW88 is not set
# CONFIG_RTW89 is not set
# CONFIG_WLAN_VENDOR_RSI is not set
# CONFIG_WLAN_VENDOR_SILABS is not set
# CONFIG_WLAN_VENDOR_ST is not set
# CONFIG_WLAN_VENDOR_TI is not set
# CONFIG_WLAN_VENDOR_ZYDAS is not set
# CONFIG_WLAN_VENDOR_QUANTENNA is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_VIRT_WIFI is not set
# CONFIG_WAN is not set
#
# Wireless WAN
#
# CONFIG_WWAN is not set
# end of Wireless WAN
# CONFIG_VMXNET3 is not set
# CONFIG_NETDEVSIM is not set
CONFIG_NET_FAILOVER=y
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
CONFIG_INPUT_KUNIT_TEST=m
# CONFIG_INPUT_APMPOWER is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_APPLETOUCH=m
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_AS5011 is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
CONFIG_JOYSTICK_XPAD=m
# CONFIG_JOYSTICK_XPAD_FF is not set
CONFIG_JOYSTICK_XPAD_LEDS=y
# CONFIG_JOYSTICK_PXRC is not set
# CONFIG_JOYSTICK_QWIIC is not set
# CONFIG_JOYSTICK_FSIA6B is not set
# CONFIG_JOYSTICK_SENSEHAT is not set
# CONFIG_JOYSTICK_SEESAW is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_ATMEL_CAPTOUCH is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_DA7280_HAPTICS is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_IQS269A is not set
# CONFIG_INPUT_IQS626A is not set
# CONFIG_INPUT_IQS7222 is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_RMI4_CORE is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_LEGACY_TIOCSTI is not set
CONFIG_LDISC_AUTOLOAD=y
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
# CONFIG_SERIAL_8250_16550A_VARIANTS is not set
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCILIB=y
CONFIG_SERIAL_8250_PCI=y
# CONFIG_SERIAL_8250_EXAR is not set
CONFIG_SERIAL_8250_CS=y
CONFIG_SERIAL_8250_NR_UARTS=8
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_PCI1XXXX is not set
CONFIG_SERIAL_8250_FSL=y
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
# CONFIG_SERIAL_8250_PERICOM is not set
CONFIG_SERIAL_OF_PLATFORM=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_PMACZILOG is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SIFIVE is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
# end of Serial drivers
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_PPC_EPAPR_HV_BYTECHAN is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_N_GSM is not set
# CONFIG_NOZOMI is not set
# CONFIG_NULL_TTY is not set
CONFIG_HVC_DRIVER=y
# CONFIG_HVC_UDBG is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_BA431 is not set
CONFIG_HW_RANDOM_VIRTIO=m
# CONFIG_HW_RANDOM_CCTRNG is not set
# CONFIG_HW_RANDOM_XIPHERA is not set
# CONFIG_APPLICOM is not set
CONFIG_DEVMEM=y
CONFIG_NVRAM=m
CONFIG_DEVPORT=y
# CONFIG_TCG_TPM is not set
# CONFIG_XILLYBUS is not set
# CONFIG_XILLYUSB is not set
# end of Character devices
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=m
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_NVIDIA_GPU is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# Mac SMBus host controller drivers
#
CONFIG_I2C_POWERMAC=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_MPC is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_CP2615 is not set
# CONFIG_I2C_PCI1XXXX is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_VIRTIO is not set
# end of I2C Hardware Bus support
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support
# CONFIG_I3C is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
# CONFIG_PPS is not set
#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support
# CONFIG_PINCTRL is not set
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_APM_POWER=m
# CONFIG_IP5XXX_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_CW2015 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
CONFIG_BATTERY_PMU=m
# CONFIG_BATTERY_SAMSUNG_SDI is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_LTC4162L is not set
# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
# CONFIG_CHARGER_MAX77976 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_BATTERY_GOLDFISH is not set
# CONFIG_BATTERY_RT5033 is not set
# CONFIG_CHARGER_BD99954 is not set
# CONFIG_BATTERY_UG3105 is not set
# CONFIG_FUEL_GAUGE_MM8013 is not set
CONFIG_HWMON=m
CONFIG_HWMON_DEBUG_CHIP=y
#
# Native drivers
#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM1177 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_AHT10 is not set
# CONFIG_SENSORS_AQUACOMPUTER_D5NEXT is not set
# CONFIG_SENSORS_AS370 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_AXI_FAN_CONTROL is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_CORSAIR_CPRO is not set
# CONFIG_SENSORS_CORSAIR_PSU is not set
CONFIG_SENSORS_DRIVETEMP=m
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GIGABYTE_WATERFORCE is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_HS3001 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWERZ is not set
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2947_I2C is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC2991 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_MAX127 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX31730 is not set
# CONFIG_SENSORS_MAX31760 is not set
# CONFIG_MAX31827 is not set
# CONFIG_SENSORS_MAX6620 is not set
# CONFIG_SENSORS_MAX6621 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MC34VR500 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_TPS23861 is not set
# CONFIG_SENSORS_MR75203 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_NCT6775_I2C is not set
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NPCM7XX is not set
# CONFIG_SENSORS_NZXT_KRAKEN2 is not set
# CONFIG_SENSORS_NZXT_SMART2 is not set
# CONFIG_SENSORS_OCC_P8_I2C is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SBTSI is not set
# CONFIG_SENSORS_SBRMI is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHT4x is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC2305 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA238 is not set
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_TMP464 is not set
# CONFIG_SENSORS_TMP513 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83773G is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_ACT8945A is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_SMPRO is not set
# CONFIG_MFD_AS3722 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_CS42L43_I2C is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_MFD_MAX5970 is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_GATEWORKS_GSC is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_MP2629 is not set
# CONFIG_MFD_HI6421_PMIC is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_IQS62X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77541 is not set
# CONFIG_MFD_MAX77620 is not set
# CONFIG_MFD_MAX77650 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77714 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6370 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_NTXEC is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_SY7636A is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT4831 is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RT5120 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_RK8XX_I2C is not set
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TI_LP87565 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS65219 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS6594_I2C is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_LOCHNAGAR is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_ROHM_BD718XX is not set
# CONFIG_MFD_ROHM_BD71828 is not set
# CONFIG_MFD_ROHM_BD957XMUF is not set
# CONFIG_MFD_STPMIC1 is not set
# CONFIG_MFD_STMFX is not set
# CONFIG_MFD_ATC260X_I2C is not set
# CONFIG_MFD_QCOM_PM8008 is not set
# CONFIG_MFD_RSMU_I2C is not set
# end of Multifunction device drivers
# CONFIG_REGULATOR is not set
# CONFIG_RC_CORE is not set
#
# CEC support
#
# CONFIG_MEDIA_CEC_SUPPORT is not set
# end of CEC support
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_APERTURE_HELPERS=y
CONFIG_VIDEO_CMDLINE=y
CONFIG_VIDEO_NOMODESET=y
# CONFIG_AUXDISPLAY is not set
# CONFIG_AGP is not set
CONFIG_DRM=y
# CONFIG_DRM_DEBUG_MM is not set
CONFIG_DRM_KUNIT_TEST_HELPERS=m
CONFIG_DRM_KUNIT_TEST=m
CONFIG_DRM_KMS_HELPER=y
# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set
CONFIG_DRM_DEBUG_MODESET_LOCK=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_DISPLAY_HELPER=m
CONFIG_DRM_DISPLAY_DP_HELPER=y
# CONFIG_DRM_DP_AUX_CHARDEV is not set
# CONFIG_DRM_DP_CEC is not set
CONFIG_DRM_TTM=m
CONFIG_DRM_EXEC=m
CONFIG_DRM_BUDDY=m
CONFIG_DRM_VRAM_HELPER=m
CONFIG_DRM_TTM_HELPER=m
CONFIG_DRM_GEM_SHMEM_HELPER=m
CONFIG_DRM_SUBALLOC_HELPER=m
#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# end of I2C encoder or helper chips
#
# ARM devices
#
# end of ARM devices
CONFIG_DRM_RADEON=m
CONFIG_DRM_RADEON_USERPTR=y
# CONFIG_DRM_AMDGPU is not set
# CONFIG_DRM_NOUVEAU is not set
CONFIG_DRM_VGEM=m
# CONFIG_DRM_VKMS is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_QXL is not set
CONFIG_DRM_VIRTIO_GPU=m
CONFIG_DRM_VIRTIO_GPU_KMS=y
CONFIG_DRM_PANEL=y
#
# Display Panels
#
# CONFIG_DRM_PANEL_LVDS is not set
# CONFIG_DRM_PANEL_SIMPLE is not set
# CONFIG_DRM_PANEL_EDP is not set
# CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO is not set
# CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6D7AA0 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E63M0 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set
# CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set
# end of Display Panels
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y
#
# Display Interface Bridges
#
# CONFIG_DRM_CHIPONE_ICN6211 is not set
# CONFIG_DRM_CHRONTEL_CH7033 is not set
# CONFIG_DRM_DISPLAY_CONNECTOR is not set
# CONFIG_DRM_ITE_IT6505 is not set
# CONFIG_DRM_LONTIUM_LT8912B is not set
# CONFIG_DRM_LONTIUM_LT9211 is not set
# CONFIG_DRM_LONTIUM_LT9611 is not set
# CONFIG_DRM_LONTIUM_LT9611UXC is not set
# CONFIG_DRM_ITE_IT66121 is not set
# CONFIG_DRM_LVDS_CODEC is not set
# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set
# CONFIG_DRM_NXP_PTN3460 is not set
# CONFIG_DRM_PARADE_PS8622 is not set
# CONFIG_DRM_PARADE_PS8640 is not set
# CONFIG_DRM_SIL_SII8620 is not set
# CONFIG_DRM_SII902X is not set
# CONFIG_DRM_SII9234 is not set
# CONFIG_DRM_SIMPLE_BRIDGE is not set
# CONFIG_DRM_THINE_THC63LVD1024 is not set
# CONFIG_DRM_TOSHIBA_TC358762 is not set
# CONFIG_DRM_TOSHIBA_TC358764 is not set
# CONFIG_DRM_TOSHIBA_TC358767 is not set
# CONFIG_DRM_TOSHIBA_TC358768 is not set
# CONFIG_DRM_TOSHIBA_TC358775 is not set
# CONFIG_DRM_TI_DLPC3433 is not set
# CONFIG_DRM_TI_TFP410 is not set
# CONFIG_DRM_TI_SN65DSI83 is not set
# CONFIG_DRM_TI_SN65DSI86 is not set
# CONFIG_DRM_TI_TPD12S015 is not set
# CONFIG_DRM_ANALOGIX_ANX6345 is not set
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_ANALOGIX_ANX7625 is not set
# CONFIG_DRM_I2C_ADV7511 is not set
# CONFIG_DRM_CDNS_DSI is not set
# CONFIG_DRM_CDNS_MHDP8546 is not set
# end of Display Interface Bridges
# CONFIG_DRM_ETNAVIV is not set
# CONFIG_DRM_LOGICVC is not set
# CONFIG_DRM_ARCPGU is not set
CONFIG_DRM_BOCHS=m
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_GM12U320 is not set
# CONFIG_DRM_OFDRM is not set
# CONFIG_DRM_SIMPLEDRM is not set
# CONFIG_DRM_GUD is not set
# CONFIG_DRM_SSD130X is not set
CONFIG_DRM_EXPORT_FOR_TESTS=y
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
CONFIG_DRM_LIB_RANDOM=y
#
# Frame buffer Devices
#
CONFIG_FB=y
CONFIG_FB_MACMODES=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_OF=y
# CONFIG_FB_CONTROL is not set
# CONFIG_FB_PLATINUM is not set
# CONFIG_FB_VALKYRIE is not set
CONFIG_FB_CT65550=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SM712 is not set
CONFIG_FB_CORE=y
CONFIG_FB_NOTIFY=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DEVICE is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYSMEM_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_IOMEM_FOPS=y
CONFIG_FB_IOMEM_HELPERS=y
CONFIG_FB_SYSMEM_HELPERS=y
CONFIG_FB_SYSMEM_HELPERS_DEFERRED=y
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=m
# CONFIG_BACKLIGHT_KTZ8866 is not set
# CONFIG_BACKLIGHT_QCOM_WLED is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
CONFIG_BACKLIGHT_LED=m
# end of Backlight & LCD device support
CONFIG_HDMI=y
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION is not set
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
# end of Console display driver support
# CONFIG_LOGO is not set
# end of Graphics support
# CONFIG_DRM_ACCEL is not set
CONFIG_SOUND=m
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_SEQ_DEVICE=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
# CONFIG_SND_OSSEMUL is not set
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=6
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_CTL_FAST_LOOKUP is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_CTL_INPUT_VALIDATION=y
CONFIG_SND_VMASTER=y
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_SEQ_MIDI_EVENT=m
CONFIG_SND_SEQ_MIDI=m
CONFIG_SND_SEQ_VIRMIDI=m
# CONFIG_SND_SEQ_UMP is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
CONFIG_SND_ALOOP=m
# CONFIG_SND_PCMTEST is not set
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SE6X is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
#
# HD-Audio
#
CONFIG_SND_HDA=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
# CONFIG_SND_HDA_INPUT_BEEP is not set
# CONFIG_SND_HDA_PATCH_LOADER is not set
# CONFIG_SND_HDA_CIRRUS_SCODEC_KUNIT_TEST is not set
# CONFIG_SND_HDA_CODEC_REALTEK is not set
# CONFIG_SND_HDA_CODEC_ANALOG is not set
# CONFIG_SND_HDA_CODEC_SIGMATEL is not set
# CONFIG_SND_HDA_CODEC_VIA is not set
CONFIG_SND_HDA_CODEC_HDMI=m
# CONFIG_SND_HDA_CODEC_CIRRUS is not set
# CONFIG_SND_HDA_CODEC_CS8409 is not set
# CONFIG_SND_HDA_CODEC_CONEXANT is not set
# CONFIG_SND_HDA_CODEC_CA0110 is not set
# CONFIG_SND_HDA_CODEC_CA0132 is not set
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
# CONFIG_SND_HDA_CODEC_SI3054 is not set
# CONFIG_SND_HDA_GENERIC is not set
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# CONFIG_SND_HDA_INTEL_HDMI_SILENT_STREAM is not set
# CONFIG_SND_HDA_CTL_DEV_ID is not set
# end of HD-Audio
CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_COMPONENT=y
CONFIG_SND_HDA_PREALLOC_SIZE=2048
CONFIG_SND_INTEL_DSP_CONFIG=m
# CONFIG_SND_PPC is not set
CONFIG_SND_AOA=m
CONFIG_SND_AOA_FABRIC_LAYOUT=m
CONFIG_SND_AOA_ONYX=m
CONFIG_SND_AOA_TAS=m
CONFIG_SND_AOA_TOONIE=m
CONFIG_SND_AOA_SOUNDBUS=m
CONFIG_SND_AOA_SOUNDBUS_I2S=m
# CONFIG_SND_USB is not set
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
# CONFIG_SND_DICE is not set
# CONFIG_SND_OXFW is not set
CONFIG_SND_ISIGHT=m
# CONFIG_SND_FIREWORKS is not set
# CONFIG_SND_BEBOB is not set
# CONFIG_SND_FIREWIRE_DIGI00X is not set
# CONFIG_SND_FIREWIRE_TASCAM is not set
# CONFIG_SND_FIREWIRE_MOTU is not set
# CONFIG_SND_FIREFACE is not set
# CONFIG_SND_PCMCIA is not set
# CONFIG_SND_SOC is not set
# CONFIG_SND_VIRTIO is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACCUTOUCH is not set
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=y
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_ASUS is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_BIGBEN_FF is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_MACALLY is not set
# CONFIG_HID_PRODIKEYS is not set
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CREATIVE_SB0540 is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELAN is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
# CONFIG_HID_EVISION is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_FT260 is not set
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_GLORIOUS is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_GOOGLE_STADIA_FF is not set
# CONFIG_HID_VIVALDI is not set
# CONFIG_HID_GT683R is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
CONFIG_HID_UCLOGIC=m
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_VRC2 is not set
# CONFIG_HID_XIAOMI is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_ITE is not set
# CONFIG_HID_JABRA is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LED is not set
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_LETSKETCH is not set
# CONFIG_HID_LOGITECH is not set
CONFIG_HID_MAGICMOUSE=y
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_MEGAWORLD_FF is not set
# CONFIG_HID_REDRAGON is not set
CONFIG_HID_MICROSOFT=m
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
CONFIG_HID_NINTENDO=m
# CONFIG_NINTENDO_FF is not set
# CONFIG_HID_NTI is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_NVIDIA_SHIELD is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PENMOUNT is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PXRC is not set
# CONFIG_HID_RAZER is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_RETRODE is not set
CONFIG_HID_ROCCAT=m
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SEMITEK is not set
# CONFIG_HID_SIGMAMICRO is not set
CONFIG_HID_SONY=m
# CONFIG_SONY_FF is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEAM is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_TOPRE is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_U2FZERO is not set
# CONFIG_HID_WACOM is not set
CONFIG_HID_WIIMOTE=m
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set
# CONFIG_HID_MCP2221 is not set
CONFIG_HID_KUNIT_TEST=m
# end of Special HID drivers
#
# HID-BPF support
#
# end of HID-BPF support
#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
# end of USB HID support
# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
# CONFIG_USB_PCI_AMD is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_FEW_INIT_RETRIES is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_PRODUCTLIST is not set
# CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB is not set
# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_MON=m
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_XPS_USB_HCD_XILINX is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=m
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_SSB is not set
# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
CONFIG_USB_UAS=m
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
#
# USB dual-mode controller drivers
#
# CONFIG_USB_CDNS_SUPPORT is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set
#
# USB port drivers
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_SIMPLE is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_F8153X is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MXUPORT is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_XSENS_MT is not set
# CONFIG_USB_SERIAL_WISHBONE is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_QT2 is not set
# CONFIG_USB_SERIAL_UPD78F0730 is not set
# CONFIG_USB_SERIAL_XR is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
CONFIG_USB_APPLEDISPLAY=m
# CONFIG_APPLE_MFI_FASTCHARGE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
CONFIG_USB_ISIGHTFW=m
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HUB_USB251XB is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
# CONFIG_USB_ONBOARD_HUB is not set
#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_ISP1301 is not set
# end of USB Physical Layer drivers
# CONFIG_USB_GADGET is not set
# CONFIG_TYPEC is not set
# CONFIG_USB_ROLE_SWITCH is not set
# CONFIG_MMC is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_CLASS_MULTICOLOR is not set
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
#
# LED drivers
#
# CONFIG_LEDS_AN30259A is not set
# CONFIG_LEDS_AW200XX is not set
# CONFIG_LEDS_AW2013 is not set
# CONFIG_LEDS_BCM6328 is not set
# CONFIG_LEDS_BCM6358 is not set
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3532 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_LM3692X is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP55XX_COMMON is not set
# CONFIG_LEDS_LP8860 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_PCA995X is not set
# CONFIG_LEDS_BD2606MVV is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_IS31FL319X is not set
# CONFIG_LEDS_IS31FL32XX is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_LM3697 is not set
#
# Flash and Torch LED drivers
#
#
# RGB LED drivers
#
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
CONFIG_LEDS_TRIGGER_DISK=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_LEDS_TRIGGER_CAMERA is not set
CONFIG_LEDS_TRIGGER_PANIC=y
# CONFIG_LEDS_TRIGGER_NETDEV is not set
# CONFIG_LEDS_TRIGGER_PATTERN is not set
# CONFIG_LEDS_TRIGGER_AUDIO is not set
# CONFIG_LEDS_TRIGGER_TTY is not set
#
# Simple LED drivers
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_LIB_KUNIT_TEST=m
CONFIG_RTC_NVMEM=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABEOZ9 is not set
# CONFIG_RTC_DRV_ABX80X is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_HYM8563 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_NCT3018Y is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_ISL12026 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3028 is not set
# CONFIG_RTC_DRV_RV3032 is not set
# CONFIG_RTC_DRV_RV8803 is not set
# CONFIG_RTC_DRV_SD3078 is not set
#
# SPI RTC drivers
#
CONFIG_RTC_I2C_AND_SPI=y
#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
# CONFIG_RTC_DRV_RX6110 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_ZYNQMP is not set
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_GENERIC=y
# CONFIG_RTC_DRV_CADENCE is not set
# CONFIG_RTC_DRV_FTRTC010 is not set
# CONFIG_RTC_DRV_R7301 is not set
#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_GOLDFISH is not set
# CONFIG_DMADEVICES is not set
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
CONFIG_UDMABUF=y
# CONFIG_DMABUF_MOVE_NOTIFY is not set
CONFIG_DMABUF_DEBUG=y
CONFIG_DMABUF_SELFTESTS=m
CONFIG_DMABUF_HEAPS=y
# CONFIG_DMABUF_SYSFS_STATS is not set
CONFIG_DMABUF_HEAPS_SYSTEM=y
# end of DMABUF options
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_PCI_LIB=y
CONFIG_VIRTIO_PCI_LIB_LEGACY=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VIRTIO_INPUT is not set
# CONFIG_VIRTIO_MMIO is not set
CONFIG_VIRTIO_DMA_SHARED_BUFFER=m
# CONFIG_VDPA is not set
CONFIG_VHOST_IOTLB=m
CONFIG_VHOST_TASK=y
CONFIG_VHOST=m
CONFIG_VHOST_MENU=y
CONFIG_VHOST_NET=m
# CONFIG_VHOST_VSOCK is not set
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support
# CONFIG_GREYBUS is not set
# CONFIG_COMEDI is not set
# CONFIG_STAGING is not set
# CONFIG_GOLDFISH is not set
# CONFIG_COMMON_CLK is not set
# CONFIG_HWSPINLOCK is not set
#
# Clock Source drivers
#
# end of Clock Source drivers
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
# end of Generic IOMMU Pagetable Support
# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMUFD is not set
#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers
#
# Rpmsg drivers
#
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers
# CONFIG_SOUNDWIRE is not set
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers
#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# CONFIG_QUICC_ENGINE is not set
# end of NXP/Freescale QorIQ SoC drivers
#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers
#
# i.MX SoC drivers
#
# end of i.MX SoC drivers
#
# Enable LiteX SoC Builder specific drivers
#
# CONFIG_LITEX_SOC_CONTROLLER is not set
# end of Enable LiteX SoC Builder specific drivers
# CONFIG_WPCM450_SOC is not set
#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers
# CONFIG_SOC_TI is not set
#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
#
# PM Domains
#
#
# Amlogic PM Domains
#
# end of Amlogic PM Domains
#
# Broadcom PM Domains
#
# end of Broadcom PM Domains
#
# i.MX PM Domains
#
# end of i.MX PM Domains
#
# Qualcomm PM Domains
#
# end of Qualcomm PM Domains
# end of PM Domains
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_PWM is not set
#
# IRQ chip support
#
CONFIG_IRQCHIP=y
# CONFIG_AL_FIC is not set
# CONFIG_XILINX_INTC is not set
# end of IRQ chip support
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_PHY_CAN_TRANSCEIVER is not set
#
# PHY drivers for Broadcom platforms
#
# CONFIG_BCM_KONA_USB2_PHY is not set
# end of PHY drivers for Broadcom platforms
# CONFIG_PHY_CADENCE_DPHY is not set
# CONFIG_PHY_CADENCE_DPHY_RX is not set
# CONFIG_PHY_CADENCE_SALVO is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# end of PHY Subsystem
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
#
# Performance monitor support
#
# CONFIG_DWC_PCIE_PMU is not set
# end of Performance monitor support
# CONFIG_RAS is not set
# CONFIG_USB4 is not set
#
# Android
#
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android
# CONFIG_DAX is not set
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
CONFIG_NVMEM_LAYOUTS=y
#
# Layout Types
#
# CONFIG_NVMEM_LAYOUT_SL28_VPD is not set
# CONFIG_NVMEM_LAYOUT_ONIE_TLV is not set
# end of Layout Types
# CONFIG_NVMEM_RMEM is not set
#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# end of HW tracing support
# CONFIG_FPGA is not set
# CONFIG_FSI is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# CONFIG_MOST is not set
# CONFIG_PECI is not set
# CONFIG_HTE is not set
# end of Device Drivers
#
# File systems
#
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
CONFIG_BUFFER_HEAD=y
CONFIG_LEGACY_DIRECT_IO=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_EXT4_KUNIT_TESTS=m
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_SUPPORT_V4 is not set
# CONFIG_XFS_SUPPORT_ASCII_CI is not set
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_ONLINE_SCRUB is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_FS_REF_VERIFY is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
CONFIG_BCACHEFS_FS=m
# CONFIG_BCACHEFS_QUOTA is not set
# CONFIG_BCACHEFS_ERASURE_CODING is not set
CONFIG_BCACHEFS_POSIX_ACL=y
# CONFIG_BCACHEFS_DEBUG is not set
CONFIG_BCACHEFS_TESTS=y
# CONFIG_BCACHEFS_LOCK_TIME_STATS is not set
# CONFIG_BCACHEFS_NO_LATENCY_ACCT is not set
CONFIG_BCACHEFS_SIX_OPTIMISTIC_SPIN=y
CONFIG_MEAN_AND_VARIANCE_UNIT_TEST=m
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=m
# CONFIG_CUSE is not set
CONFIG_VIRTIO_FS=m
# CONFIG_OVERLAY_FS is not set
#
# Caches
#
CONFIG_NETFS_SUPPORT=y
# CONFIG_NETFS_STATS is not set
# CONFIG_FSCACHE is not set
# end of Caches
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
CONFIG_FAT_DEFAULT_UTF8=y
CONFIG_FAT_KUNIT_TEST=m
CONFIG_EXFAT_FS=m
CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8"
# CONFIG_NTFS_FS is not set
CONFIG_NTFS3_FS=m
CONFIG_NTFS3_LZX_XPRESS=y
# CONFIG_NTFS3_FS_POSIX_ACL is not set
# end of DOS/FAT/EXFAT/NT Filesystems
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_TMPFS_QUOTA is not set
CONFIG_CONFIGFS_FS=m
# end of Pseudo filesystems
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
# CONFIG_ECRYPT_FS is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
CONFIG_BEFS_DEBUG=y
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EROFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
# CONFIG_NFS_V2 is not set
# CONFIG_NFS_V3 is not set
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_FLEXFILE_LAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
CONFIG_NFS_V4_SECURITY_LABEL=y
# CONFIG_NFS_FSCACHE is not set
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFS_DISABLE_UDP_SUPPORT=y
# CONFIG_NFS_V4_2_READ_PLUS is not set
# CONFIG_NFSD is not set
CONFIG_GRACE_PERIOD=m
CONFIG_LOCKD=m
CONFIG_NFS_COMMON=y
CONFIG_NFS_V4_2_SSC_HELPER=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_BACKCHANNEL=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
CONFIG_SUNRPC_DEBUG=y
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
# CONFIG_CIFS_UPCALL is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_SWN_UPCALL=y
# CONFIG_SMB_SERVER is not set
CONFIG_SMBFS=m
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=y
CONFIG_9P_FS_POSIX_ACL=y
# CONFIG_9P_FS_SECURITY is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=m
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_MAC_ROMAN=m
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
CONFIG_NLS_UCS2_UTILS=m
# CONFIG_DLM is not set
CONFIG_UNICODE=m
# CONFIG_UNICODE_NORMALIZATION_SELFTEST is not set
CONFIG_IO_WQ=y
# end of File systems
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_REQUEST_CACHE=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_TRUSTED_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
CONFIG_KEY_DH_OPERATIONS=y
CONFIG_KEY_NOTIFICATIONS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_PATH is not set
CONFIG_HARDENED_USERCOPY=y
CONFIG_FORTIFY_SOURCE=y
# CONFIG_STATIC_USERMODEHELPER is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_LOADPIN is not set
CONFIG_SECURITY_YAMA=y
# CONFIG_SECURITY_SAFESETID is not set
# CONFIG_SECURITY_LOCKDOWN_LSM is not set
# CONFIG_SECURITY_LANDLOCK is not set
# CONFIG_INTEGRITY is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
# CONFIG_INIT_STACK_NONE is not set
CONFIG_INIT_STACK_ALL_PATTERN=y
# CONFIG_INIT_STACK_ALL_ZERO is not set
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
# CONFIG_ZERO_CALL_USED_REGS is not set
# end of Memory initialization
#
# Hardening of kernel data structures
#
CONFIG_LIST_HARDENED=y
CONFIG_BUG_ON_DATA_CORRUPTION=y
# end of Hardening of kernel data structures
CONFIG_RANDSTRUCT_NONE=y
# CONFIG_RANDSTRUCT_FULL is not set
# CONFIG_RANDSTRUCT_PERFORMANCE is not set
# end of Kernel hardening options
# end of Security options
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SIG2=y
CONFIG_CRYPTO_SKCIPHER=m
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=m
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
# CONFIG_CRYPTO_MANAGER_EXTRA_TESTS is not set
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_NULL2=m
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_ENGINE=m
# end of Crypto core or helper
#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
# CONFIG_CRYPTO_DH_RFC7919_GROUPS is not set
CONFIG_CRYPTO_ECC=m
CONFIG_CRYPTO_ECDH=m
# CONFIG_CRYPTO_ECDSA is not set
# CONFIG_CRYPTO_ECRDSA is not set
# CONFIG_CRYPTO_SM2 is not set
# CONFIG_CRYPTO_CURVE25519 is not set
# end of Public-key cryptography
#
# Block ciphers
#
CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_AES_TI is not set
# CONFIG_CRYPTO_ARIA is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SM4_GENERIC is not set
# CONFIG_CRYPTO_TWOFISH is not set
# end of Block ciphers
#
# Length-preserving ciphers and modes
#
CONFIG_CRYPTO_ADIANTUM=m
CONFIG_CRYPTO_CHACHA20=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_HCTR2 is not set
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_NHPOLY1305=m
# end of Length-preserving ciphers and modes
#
# AEAD (authenticated encryption with associated data) ciphers
#
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_GENIV=m
CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_ECHAINIV=m
CONFIG_CRYPTO_ESSIV=m
# end of AEAD (authenticated encryption with associated data) ciphers
#
# Hashes, digests, and MACs
#
CONFIG_CRYPTO_BLAKE2B=y
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_POLY1305=m
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_SHA3=m
# CONFIG_CRYPTO_SM3_GENERIC is not set
# CONFIG_CRYPTO_STREEBOG is not set
# CONFIG_CRYPTO_VMAC is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_XXHASH=y
# end of Hashes, digests, and MACs
#
# CRCs (cyclic redundancy checks)
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRCT10DIF is not set
# CONFIG_CRYPTO_CRC64_ROCKSOFT is not set
# end of CRCs (cyclic redundancy checks)
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
CONFIG_CRYPTO_LZ4=m
# CONFIG_CRYPTO_LZ4HC is not set
CONFIG_CRYPTO_ZSTD=y
# end of Compression
#
# Random number generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DRBG_MENU=m
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=m
CONFIG_CRYPTO_JITTERENTROPY=m
CONFIG_CRYPTO_JITTERENTROPY_MEMORY_BLOCKS=64
CONFIG_CRYPTO_JITTERENTROPY_MEMORY_BLOCKSIZE=32
CONFIG_CRYPTO_JITTERENTROPY_OSR=1
CONFIG_CRYPTO_KDF800108_CTR=y
# end of Random number generation
#
# Userspace interface
#
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_USER_API_RNG=m
# CONFIG_CRYPTO_USER_API_RNG_CAVP is not set
CONFIG_CRYPTO_USER_API_AEAD=m
# CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE is not set
# CONFIG_CRYPTO_STATS is not set
# end of Userspace interface
CONFIG_CRYPTO_HASH_INFO=y
#
# Accelerated Cryptographic Algorithms for CPU (powerpc)
#
CONFIG_CRYPTO_MD5_PPC=m
CONFIG_CRYPTO_SHA1_PPC=m
# end of Accelerated Cryptographic Algorithms for CPU (powerpc)
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
CONFIG_CRYPTO_DEV_VIRTIO=m
# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
# CONFIG_CRYPTO_DEV_CCREE is not set
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set
# CONFIG_FIPS_SIGNATURE_SELFTEST is not set
#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
# end of Certificates for signature checking
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_RAID6_PQ_BENCHMARK=y
CONFIG_LINEAR_RANGES=m
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
# CONFIG_CORDIC is not set
CONFIG_PRIME_NUMBERS=m
CONFIG_GENERIC_PCI_IOMAP=y
#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LIB_AES=m
CONFIG_CRYPTO_LIB_ARC4=m
CONFIG_CRYPTO_LIB_GF128MUL=m
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=m
CONFIG_CRYPTO_LIB_CHACHA=m
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=m
CONFIG_CRYPTO_LIB_CURVE25519=m
CONFIG_CRYPTO_LIB_DES=m
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=m
CONFIG_CRYPTO_LIB_POLY1305=m
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=m
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC64_ROCKSOFT is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=m
# CONFIG_CRC4 is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=m
CONFIG_LZ4HC_COMPRESS=m
CONFIG_LZ4_DECOMPRESS=m
CONFIG_ZSTD_COMMON=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
# CONFIG_XZ_DEC is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC16=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_CLOSURES=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_ARCH_DMA_DEFAULT_COHERENT=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
# CONFIG_FORCE_NR_CPUS is not set
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_CLZ_TAB=y
# CONFIG_IRQ_POLL is not set
CONFIG_MPILIB=y
CONFIG_DIMLIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_FONT_SUN8x16=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_STACKDEPOT_MAX_FRAMES=64
CONFIG_SBITMAP=y
# CONFIG_LWQ_TEST is not set
# end of Library routines
CONFIG_GENERIC_IOREMAP=y
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DYNAMIC_DEBUG_CORE is not set
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_MISC is not set
#
# Compile-time checks and compiler options
#
CONFIG_AS_HAS_NON_CONST_ULEB128=y
CONFIG_DEBUG_INFO_NONE=y
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_DWARF5 is not set
CONFIG_FRAME_WARN=1024
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B is not set
# CONFIG_VMLINUX_MAP is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
CONFIG_HAVE_ARCH_KCSAN=y
CONFIG_HAVE_KCSAN_COMPILER=y
# CONFIG_KCSAN is not set
# end of Generic Kernel Debugging Instruments
#
# Networking Debugging
#
# CONFIG_NET_DEV_REFCNT_TRACKER is not set
# CONFIG_NET_NS_REFCNT_TRACKER is not set
# CONFIG_DEBUG_NET is not set
# end of Networking Debugging
#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_DEBUG_PAGEALLOC=y
# CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT is not set
CONFIG_SLUB_DEBUG=y
# CONFIG_SLUB_DEBUG_ON is not set
CONFIG_PAGE_OWNER=y
CONFIG_PAGE_POISONING=y
CONFIG_DEBUG_RODATA_TEST=y
CONFIG_ARCH_HAS_DEBUG_WX=y
CONFIG_DEBUG_WX=y
CONFIG_GENERIC_PTDUMP=y
CONFIG_PTDUMP_CORE=y
# CONFIG_PTDUMP_DEBUGFS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SHRINKER_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_VM_PGTABLE=y
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_DEBUG_KMAP_LOCAL is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# CONFIG_KASAN is not set
CONFIG_HAVE_ARCH_KFENCE=y
CONFIG_KFENCE=y
CONFIG_KFENCE_SAMPLE_INTERVAL=100
CONFIG_KFENCE_NUM_OBJECTS=255
CONFIG_KFENCE_DEFERRABLE=y
# CONFIG_KFENCE_STATIC_KEYS is not set
CONFIG_KFENCE_STRESS_TEST_FAULTS=0
# end of Memory Debugging
CONFIG_DEBUG_SHIRQ=y
#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_HAVE_HARDLOCKUP_DETECTOR_BUDDY=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_HARDLOCKUP_DETECTOR_PERF is not set
CONFIG_HARDLOCKUP_DETECTOR_BUDDY=y
# CONFIG_HARDLOCKUP_DETECTOR_ARCH is not set
CONFIG_HARDLOCKUP_DETECTOR_COUNTS_HRTIMER=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=60
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_WQ_WATCHDOG=y
# CONFIG_WQ_CPU_INTENSIVE_REPORT is not set
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHED_INFO=y
# CONFIG_SCHEDSTATS is not set
# end of Scheduler Debugging
# CONFIG_DEBUG_TIMEKEEPING is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
CONFIG_DEBUG_RWSEMS=y
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)
CONFIG_DEBUG_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PLIST is not set
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_DEBUG_CLOSURES=y
CONFIG_DEBUG_MAPLE_TREE=y
# end of Debug kernel data structures
#
# RCU Debugging
#
# CONFIG_RCU_SCALE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_REF_SCALE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
CONFIG_RCU_CPU_STALL_CPUTIME=y
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_OBJTOOL_MCOUNT=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
CONFIG_IO_STRICT_DEVMEM=y
#
# powerpc Debugging
#
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_JUMP_LABEL_FEATURE_CHECKS is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
# CONFIG_BDI_SWITCH is not set
CONFIG_BOOTX_TEXT=y
# CONFIG_PPC_EARLY_DEBUG is not set
# end of powerpc Debugging
#
# Kernel Testing and Coverage
#
CONFIG_KUNIT=m
CONFIG_KUNIT_DEBUGFS=y
CONFIG_KUNIT_TEST=m
# CONFIG_KUNIT_EXAMPLE_TEST is not set
# CONFIG_KUNIT_ALL_TESTS is not set
CONFIG_KUNIT_DEFAULT_ENABLED=y
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
CONFIG_RUNTIME_TESTING_MENU=y
# CONFIG_TEST_DHRY is not set
# CONFIG_LKDTM is not set
CONFIG_CPUMASK_KUNIT_TEST=m
CONFIG_TEST_LIST_SORT=m
CONFIG_TEST_MIN_HEAP=m
CONFIG_TEST_SORT=m
CONFIG_TEST_DIV64=m
CONFIG_TEST_IOV_ITER=m
CONFIG_BACKTRACE_SELF_TEST=m
# CONFIG_TEST_REF_TRACKER is not set
CONFIG_RBTREE_TEST=m
CONFIG_REED_SOLOMON_TEST=m
CONFIG_INTERVAL_TREE_TEST=m
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_ASYNC_RAID6_TEST=m
# CONFIG_TEST_HEXDUMP is not set
CONFIG_STRING_SELFTEST=m
CONFIG_TEST_STRING_HELPERS=m
CONFIG_TEST_KSTRTOX=y
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_SCANF is not set
# CONFIG_TEST_BITMAP is not set
CONFIG_TEST_UUID=m
CONFIG_TEST_XARRAY=m
CONFIG_TEST_MAPLE_TREE=m
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_IDA is not set
# CONFIG_TEST_LKM is not set
CONFIG_TEST_BITOPS=m
CONFIG_TEST_VMALLOC=m
CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
# CONFIG_TEST_BLACKHOLE_DEV is not set
CONFIG_FIND_BIT_BENCHMARK=m
# CONFIG_TEST_FIRMWARE is not set
CONFIG_TEST_SYSCTL=m
CONFIG_BITFIELD_KUNIT=m
CONFIG_CHECKSUM_KUNIT=m
CONFIG_HASH_KUNIT_TEST=m
CONFIG_RESOURCE_KUNIT_TEST=m
CONFIG_SYSCTL_KUNIT_TEST=m
CONFIG_LIST_KUNIT_TEST=m
CONFIG_HASHTABLE_KUNIT_TEST=m
CONFIG_LINEAR_RANGES_TEST=m
CONFIG_CMDLINE_KUNIT_TEST=m
CONFIG_BITS_TEST=m
CONFIG_SLUB_KUNIT_TEST=m
CONFIG_MEMCPY_KUNIT_TEST=m
CONFIG_MEMCPY_SLOW_KUNIT_TEST=y
CONFIG_IS_SIGNED_TYPE_KUNIT_TEST=m
CONFIG_OVERFLOW_KUNIT_TEST=m
CONFIG_STACKINIT_KUNIT_TEST=m
CONFIG_FORTIFY_KUNIT_TEST=m
CONFIG_STRCAT_KUNIT_TEST=m
CONFIG_STRSCPY_KUNIT_TEST=m
CONFIG_SIPHASH_KUNIT_TEST=m
# CONFIG_TEST_UDELAY is not set
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_TEST_KMOD is not set
CONFIG_TEST_MEMCAT_P=m
CONFIG_TEST_MEMINIT=m
CONFIG_TEST_FREE_PAGES=m
CONFIG_TEST_OBJPOOL=m
CONFIG_ARCH_USE_MEMTEST=y
# CONFIG_MEMTEST is not set
# end of Kernel Testing and Coverage
#
# Rust hacking
#
# end of Rust hacking
# end of Kernel hacking
#
# Gentoo Linux
#
CONFIG_GENTOO_LINUX=y
CONFIG_GENTOO_LINUX_UDEV=y
CONFIG_GENTOO_LINUX_PORTAGE=y
#
# Support for init systems, system and service managers
#
CONFIG_GENTOO_LINUX_INIT_SCRIPT=y
CONFIG_GENTOO_LINUX_INIT_SYSTEMD=y
# end of Support for init systems, system and service managers
# CONFIG_GENTOO_KERNEL_SELF_PROTECTION is not set
CONFIG_GENTOO_PRINT_FIRMWARE_INFO=y
# end of Gentoo Linux
[-- Attachment #3: dmesg_689_g4 --]
[-- Type: application/octet-stream, Size: 48148 bytes --]
[ 0.000000] Total memory = 2048MB; using 4096kB for hash table
[ 0.000000] Activating Kernel Userspace Access Protection
[ 0.000000] Activating Kernel Userspace Execution Prevention
[ 0.000000] Linux version 6.8.9-gentoo-PMacG4 (root@T800) (gcc (Gentoo 13.2.1_p20240210 p14) 13.2.1 20240210, GNU ld (Gentoo 2.42 p3) 2.42.0) #1 SMP Mon May 6 20:04:36 CEST 2024
[ 0.000000] ioremap() called early from pmac_feature_init+0x208/0xff8. Use early_ioremap() instead
[ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0x24
[ 0.000000] Mapped at 0xff3bf000
[ 0.000000] ioremap() called early from probe_one_macio+0x214/0x374. Use early_ioremap() instead
[ 0.000000] Found a Keylargo mac-io controller, rev: 3, mapped at 0x(ptrval)
[ 0.000000] PowerMac motherboard: PowerMac G4 Windtunnel
[ 0.000000] ioremap() called early from btext_map+0x5c/0x7c. Use early_ioremap() instead
[ 0.000000] Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
[ 0.000000] printk: legacy bootconsole [udbg0] enabled
[ 0.000000] CPU maps initialized for 1 thread per core
[ 0.000000] (thread shift is 0)
[ 0.000000] -----------------------------------------------------
[ 0.000000] phys_mem_size = 0x80000000
[ 0.000000] dcache_bsize = 0x20
[ 0.000000] icache_bsize = 0x20
[ 0.000000] cpu_features = 0x000000002514600a
[ 0.000000] possible = 0x00000000277de00a
[ 0.000000] always = 0x0000000001000000
[ 0.000000] cpu_user_features = 0x9c000001 0x00000000
[ 0.000000] mmu_features = 0x00010201
[ 0.000000] Hash_size = 0x400000
[ 0.000000] Hash_mask = 0xffff
[ 0.000000] -----------------------------------------------------
[ 0.000000] ioremap() called early from pmac_setup_arch+0xfc/0x3c0. Use early_ioremap() instead
[ 0.000000] ioremap() called early from find_via_pmu+0x31c/0x3b8. Use early_ioremap() instead
[ 0.000000] ioremap() called early from find_via_pmu+0x158/0x3b8. Use early_ioremap() instead
[ 0.000000] via-pmu: Server Mode is disabled
[ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c
[ 0.000000] ioremap() called early from pmac_nvram_init+0x20c/0x6c4. Use early_ioremap() instead
[ 0.000000] nvram: Checking bank 0...
[ 0.000000] nvram: gen0=3419, gen1=3420
[ 0.000000] nvram: Active bank is: 1
[ 0.000000] nvram: OF partition at 0x410
[ 0.000000] nvram: XP partition at 0x1020
[ 0.000000] nvram: NR partition at 0x1120
[ 0.000000] Top of RAM: 0x80000000, Total RAM: 0x80000000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
[ 0.000000] Normal empty
[ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] percpu: Embedded 28 pages/cpu s24544 r8192 d81952 u114688
[ 0.000000] pcpu-alloc: s24544 r8192 d81952 u114688 alloc=28*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Kernel command line: ro root=/dev/sda5 slub_debug=FZP page_poison=1 netconsole=6666@192.168.2.8/eth0,6666@192.168.2.3/A8:A1:59:16:4F:EA debug
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560
[ 0.000000] mem auto-init: stack:all(pattern), heap alloc:off, heap free:off
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xffbbf000..0xfffff000 : fixmap
[ 0.000000] * 0xff400000..0xff800000 : highmem PTEs
[ 0.000000] * 0xff115000..0xff400000 : early ioremap
[ 0.000000] * 0xf1000000..0xff115000 : vmalloc & ioremap
[ 0.000000] * 0xb0000000..0xc0000000 : modules
[ 0.000000] Memory: 2056020K/2097152K available (7852K kernel code, 536K rwdata, 4436K rodata, 1356K init, 281K bss, 41132K reserved, 0K cma-reserved, 1310720K highmem)
[ 0.000000] **********************************************************
[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.000000] ** **
[ 0.000000] ** This system shows unhashed kernel memory addresses **
[ 0.000000] ** via the console, logs, and other interfaces. This **
[ 0.000000] ** might reduce the security of your system. **
[ 0.000000] ** **
[ 0.000000] ** If you see this message and you are not debugging **
[ 0.000000] ** the kernel, report this immediately to your system **
[ 0.000000] ** administrator! **
[ 0.000000] ** **
[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.000000] **********************************************************
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
[ 0.000000] mpic: Resetting
[ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 2 CPUs
[ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f
[ 0.000000] mpic: Initializing for 64 sources
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] time_init: decrementer frequency = 41.658765 MHz
[ 0.000000] time_init: processor frequency = 1416.666661 MHz
[ 0.000006] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x99b97f1da, max_idle_ns: 440795202966 ns
[ 0.000557] clocksource: timebase mult[18012a56] shift[24] registered
[ 0.001052] clockevent: decrementer mult[aaa2619] shift[32] cpu[0]
[ 0.001788] kfence: initialized - using 2097152 bytes for 255 objects at 0xeeae2000-0xeece2000
[ 0.003255] Console: colour dummy device 80x25
[ 0.003721] printk: legacy console [tty0] enabled
[ 0.004181] printk: legacy bootconsole [udbg0] disabled
[ 0.004731] pid_max: default: 32768 minimum: 301
[ 0.007547] LSM: initializing lsm=capability,yama
[ 0.007628] Yama: becoming mindful.
[ 0.008551] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.008603] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.015004] PowerMac SMP probe found 2 cpus
[ 0.015553] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
[ 0.015610] channel 0 bus <multibus>
[ 0.015632] channel 1 bus <multibus>
[ 0.015740] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
[ 0.015783] channel 0 bus <multibus>
[ 0.015844] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c
[ 0.016026] channel 1 bus <multibus>
[ 0.016047] channel 2 bus <multibus>
[ 0.016132] pmf: no parser for command 17 !
[ 0.016206] Processor timebase sync using GPIO 0x73
[ 0.016220] mpic: requesting IPIs...
[ 0.016324] CPU0: L2CR is 80000000
[ 0.016339] CPU0: L3CR is 9c030000
[ 0.018222] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.018393] MPC7450 family performance monitor hardware support registered
[ 0.018604] rcu: Hierarchical SRCU implementation.
[ 0.018623] rcu: Max phase no-delay instances is 1000.
[ 0.019330] smp: Bringing up secondary CPUs ...
[83973666.357117] CPU1: L2CR was 0
[83973666.357177] CPU1: L2CR set to 80000000
[83973666.357184] CPU1: L3CR was 0
[83973666.357330] CPU1: L3CR set to 9c030000
[ 0.022603] smp: Brought up 1 node, 2 CPUs
[ 0.025293] devtmpfs: initialized
[ 0.026204] Duplicate name in PowerPC,G4@0, renamed to "l2-cache#1"
[ 0.026368] Duplicate name in l2-cache#1, renamed to "l2-cache#1"
[ 0.026858] Duplicate name in PowerPC,G4@1, renamed to "l2-cache#1"
[ 0.026985] Duplicate name in l2-cache#1, renamed to "l2-cache#1"
[ 0.033009] Duplicate name in gpio@50, renamed to "gpio5@6f#1"
[ 0.033115] Duplicate name in gpio@50, renamed to "gpio6@70#1"
[ 0.033328] Duplicate name in gpio@50, renamed to "gpio11@75#1"
[ 0.033426] Duplicate name in gpio@50, renamed to "extint-gpio15@67#1"
[ 0.041366] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0
[ 0.041414] PCI host bridge /pci@f0000000 ranges:
[ 0.041454] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000
[ 0.041484] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
[ 0.041619] MEM 0x0000000090000000..0x00000000afffffff -> 0x0000000090000000
[ 0.041678] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0
[ 0.041701] PCI host bridge /pci@f2000000 (primary) ranges:
[ 0.041734] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000
[ 0.041763] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000
[ 0.041921] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000
[ 0.041994] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0
[ 0.042017] PCI host bridge /pci@f4000000 ranges:
[ 0.042048] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000
[ 0.042073] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000
[ 0.042322] Found NEC PD720100A USB2 chip with disabled EHCI, fixing up...
[ 0.042797] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.042893] futex hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.046255] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.052737] PCI: Probing PCI hardware
[ 0.053628] PCI host bridge to bus 0000:00
[ 0.053664] pci_bus 0000:00: root bus resource [io 0xff780000-0xfff7ffff] (bus address [0x0000-0x7fffff])
[ 0.053695] pci_bus 0000:00: root bus resource [mem 0xf1000000-0xf1ffffff]
[ 0.053717] pci_bus 0000:00: root bus resource [mem 0x90000000-0xafffffff]
[ 0.053773] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.053796] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.054451] pci 0000:00:0b.0: [106b:0034] type 00 class 0x060000 conventional PCI endpoint
[ 0.055061] pci 0000:00:10.0: [1002:4150] type 00 class 0x030000 conventional PCI endpoint
[ 0.055107] pci 0000:00:10.0: BAR 0 [mem 0xa0000000-0xafffffff pref]
[ 0.055133] pci 0000:00:10.0: BAR 1 [io 0xff780400-0xff7804ff]
[ 0.055158] pci 0000:00:10.0: BAR 2 [mem 0x90000000-0x9000ffff]
[ 0.055199] pci 0000:00:10.0: ROM [mem 0x90020000-0x9003ffff pref]
[ 0.055255] pci 0000:00:10.0: supports D1 D2
[ 0.056189] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.056839] OF: /pci@f2000000/mac-io@17/gpio@50/gpio5@6f: could not find phandle 1751474532
[ 0.056913] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio15@67: could not find phandle 1751474532
[ 0.056989] OF: /pci@f2000000/mac-io@17/gpio@50/gpio6@70: could not find phandle 1634562093
[ 0.057057] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio16@68: could not find phandle 1936745825
[ 0.057135] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio14@66: could not find phandle 1818848869
[ 0.057212] OF: /pci@f2000000/mac-io@17/gpio@50/gpio12@76: could not find phandle 1835103092
[ 0.057276] OF: /pci@f2000000/mac-io@17/gpio@50/gpio11@75: could not find phandle 1635083369
[ 0.057338] OF: /pci@f2000000/mac-io@17/gpio@50/gpio5@6f: could not find phandle 1751474532
[ 0.057399] OF: /pci@f2000000/mac-io@17/gpio@50/gpio6@70: could not find phandle 1634562093
[ 0.057460] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio4@5c: could not find phandle 1818848869
[ 0.057534] OF: /pci@f2000000/mac-io@17/gpio@50/gpio11@75: could not find phandle 1635083369
[ 0.057596] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio15@67: could not find phandle 1751474532
[ 0.058856] pci_bus 0001:00: Fixed dependency cycle(s) with /pci@f2000000/mac-io@17/interrupt-controller@40000
[ 0.058978] PCI host bridge to bus 0001:00
[ 0.058998] pci_bus 0001:00: root bus resource [io 0x0000-0x7fffff]
[ 0.059021] pci_bus 0001:00: root bus resource [mem 0xf3000000-0xf3ffffff]
[ 0.059043] pci_bus 0001:00: root bus resource [mem 0x80000000-0x8fffffff]
[ 0.059067] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.059087] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.059563] pci 0001:00:0b.0: [106b:0035] type 00 class 0x060000 conventional PCI endpoint
[ 0.060163] pci 0001:00:12.0: [1033:0035] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.060207] pci 0001:00:12.0: BAR 0 [mem 0x8008c000-0x8008cfff]
[ 0.060288] pci 0001:00:12.0: supports D1 D2
[ 0.060304] pci 0001:00:12.0: PME# supported from D0 D1 D2 D3hot
[ 0.060651] pci 0001:00:12.1: [1033:0035] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.060692] pci 0001:00:12.1: BAR 0 [mem 0x8008b000-0x8008bfff]
[ 0.060770] pci 0001:00:12.1: supports D1 D2
[ 0.060787] pci 0001:00:12.1: PME# supported from D0 D1 D2 D3hot
[ 0.061239] pci 0001:00:12.2: [1033:00e0] type 00 class 0x0c0320 conventional PCI endpoint
[ 0.061281] pci 0001:00:12.2: BAR 0 [mem 0x80081000-0x800810ff]
[ 0.061360] pci 0001:00:12.2: supports D1 D2
[ 0.061378] pci 0001:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.061710] pci 0001:00:13.0: [1095:3112] type 00 class 0x018000 conventional PCI endpoint
[ 0.061751] pci 0001:00:13.0: BAR 0 [io 0x0460-0x0467]
[ 0.061774] pci 0001:00:13.0: BAR 1 [io 0x0450-0x0453]
[ 0.061796] pci 0001:00:13.0: BAR 2 [io 0x0440-0x0447]
[ 0.061819] pci 0001:00:13.0: BAR 3 [io 0x0430-0x0433]
[ 0.061841] pci 0001:00:13.0: BAR 4 [io 0x0420-0x042f]
[ 0.061864] pci 0001:00:13.0: BAR 5 [mem 0x80082000-0x800821ff]
[ 0.061888] pci 0001:00:13.0: ROM [mem 0x80100000-0x8017ffff pref]
[ 0.061938] pci 0001:00:13.0: supports D1 D2
[ 0.062344] pci 0001:00:15.0: [9710:9865] type 00 class 0x070002 conventional PCI endpoint
[ 0.062389] pci 0001:00:15.0: BAR 0 [io 0x0410-0x0417]
[ 0.062413] pci 0001:00:15.0: BAR 1 [mem 0x8008a000-0x8008afff]
[ 0.062446] pci 0001:00:15.0: BAR 4 [mem 0x80089000-0x80089fff]
[ 0.062509] pci 0001:00:15.0: supports D1 D2
[ 0.062525] pci 0001:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.062866] pci 0001:00:15.1: [9710:9865] type 00 class 0x070002 conventional PCI endpoint
[ 0.062908] pci 0001:00:15.1: BAR 0 [io 0x0400-0x0407]
[ 0.062931] pci 0001:00:15.1: BAR 1 [mem 0x80088000-0x80088fff]
[ 0.062964] pci 0001:00:15.1: BAR 4 [mem 0x80087000-0x80087fff]
[ 0.063026] pci 0001:00:15.1: supports D1 D2
[ 0.063044] pci 0001:00:15.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.063416] pci 0001:00:15.2: [ffff:9865] type 00 class 0x070103 conventional PCI endpoint
[ 0.063458] pci 0001:00:15.2: BAR 0 [io 0x0000-0x0007]
[ 0.063481] pci 0001:00:15.2: BAR 1 [io 0x0000-0x0007]
[ 0.063504] pci 0001:00:15.2: BAR 2 [mem 0x00000000-0x00000fff]
[ 0.063532] pci 0001:00:15.2: BAR 4 [mem 0x00000000-0x00000fff]
[ 0.063594] pci 0001:00:15.2: supports D1 D2
[ 0.063610] pci 0001:00:15.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.064054] pci 0001:00:16.0: [14e4:4320] type 00 class 0x028000 conventional PCI endpoint
[ 0.064096] pci 0001:00:16.0: BAR 0 [mem 0x8008e000-0x8008ffff]
[ 0.064173] pci 0001:00:16.0: supports D1 D2
[ 0.064190] pci 0001:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.064533] pci 0001:00:17.0: [106b:0022] type 00 class 0xff0000 conventional PCI endpoint
[ 0.064574] pci 0001:00:17.0: BAR 0 [mem 0x80000000-0x8007ffff]
[ 0.065053] pci 0001:00:18.0: [106b:0019] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.065094] pci 0001:00:18.0: BAR 0 [mem 0x80086000-0x80086fff]
[ 0.065458] pci 0001:00:19.0: [106b:0019] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.065500] pci 0001:00:19.0: BAR 0 [mem 0x80085000-0x80085fff]
[ 0.065903] pci 0001:00:1b.0: [1033:0035] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.065946] pci 0001:00:1b.0: BAR 0 [mem 0x80084000-0x80084fff]
[ 0.066026] pci 0001:00:1b.0: supports D1 D2
[ 0.066042] pci 0001:00:1b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.066521] pci 0001:00:1b.1: [1033:0035] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.066565] pci 0001:00:1b.1: BAR 0 [mem 0x80083000-0x80083fff]
[ 0.066644] pci 0001:00:1b.1: supports D1 D2
[ 0.066660] pci 0001:00:1b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.066995] pci 0001:00:1b.2: [1033:00e0] type 00 class 0x0c0320 conventional PCI endpoint
[ 0.067036] pci 0001:00:1b.2: BAR 0 [mem 0x80080000-0x800800ff]
[ 0.067114] pci 0001:00:1b.2: supports D1 D2
[ 0.067131] pci 0001:00:1b.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.067575] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.068987] PCI host bridge to bus 0002:00
[ 0.069020] pci_bus 0002:00: root bus resource [io 0x880000-0x107ffff] (bus address [0x0000-0x7fffff])
[ 0.069047] pci_bus 0002:00: root bus resource [mem 0xf5000000-0xf5ffffff]
[ 0.069071] pci_bus 0002:00: root bus resource [bus 00-ff]
[ 0.069091] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.069567] pci 0002:00:0b.0: [106b:0036] type 00 class 0x060000 conventional PCI endpoint
[ 0.069973] pci 0002:00:0d.0: [106b:0033] type 00 class 0xff0000 conventional PCI endpoint
[ 0.070014] pci 0002:00:0d.0: BAR 0 [mem 0xf5004000-0xf5007fff]
[ 0.070395] pci 0002:00:0e.0: [106b:0031] type 00 class 0x0c0010 conventional PCI endpoint
[ 0.070435] pci 0002:00:0e.0: BAR 0 [mem 0xf5000000-0xf5000fff]
[ 0.070506] pci 0002:00:0e.0: supports D1 D2
[ 0.070522] pci 0002:00:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.070966] pci 0002:00:0f.0: [106b:0032] type 00 class 0x020000 conventional PCI endpoint
[ 0.071010] pci 0002:00:0f.0: BAR 0 [mem 0xf5200000-0xf53fffff]
[ 0.071061] pci 0002:00:0f.0: ROM [mem 0xf5100000-0xf51fffff pref]
[ 0.071939] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.072580] PCI 0000:00 Cannot reserve Legacy IO [io 0xff780000-0xff780fff]
[ 0.072622] PCI 0001:00 Cannot reserve Legacy IO [io 0x0000-0x0fff]
[ 0.072656] pci_bus 0000:00: resource 4 [io 0xff780000-0xfff7ffff]
[ 0.072677] pci_bus 0000:00: resource 5 [mem 0xf1000000-0xf1ffffff]
[ 0.072696] pci_bus 0000:00: resource 6 [mem 0x90000000-0xafffffff]
[ 0.072738] pci 0001:00:15.2: BAR 2 [mem 0xf3000000-0xf3000fff]: assigned
[ 0.072764] pci 0001:00:15.2: BAR 4 [mem 0xf3001000-0xf3001fff]: assigned
[ 0.072787] pci 0001:00:15.2: BAR 0 [io 0x1000-0x1007]: assigned
[ 0.072809] pci 0001:00:15.2: BAR 1 [io 0x1008-0x100f]: assigned
[ 0.072845] pci_bus 0001:00: resource 4 [io 0x0000-0x7fffff]
[ 0.072864] pci_bus 0001:00: resource 5 [mem 0xf3000000-0xf3ffffff]
[ 0.072883] pci_bus 0001:00: resource 6 [mem 0x80000000-0x8fffffff]
[ 0.072905] pci_bus 0002:00: resource 4 [io 0x880000-0x107ffff]
[ 0.072924] pci_bus 0002:00: resource 5 [mem 0xf5000000-0xf5ffffff]
[ 0.135603] raid6: altivecx8 gen() 3316 MB/s
[ 0.192365] raid6: altivecx4 gen() 3389 MB/s
[ 0.249118] raid6: altivecx2 gen() 3177 MB/s
[ 0.305877] raid6: altivecx1 gen() 2442 MB/s
[ 0.362691] raid6: int32x8 gen() 352 MB/s
[ 0.419415] raid6: int32x4 gen() 426 MB/s
[ 0.476147] raid6: int32x2 gen() 795 MB/s
[ 0.532920] raid6: int32x1 gen() 551 MB/s
[ 0.532937] raid6: using algorithm altivecx4 gen() 3389 MB/s
[ 0.532953] raid6: using intx1 recovery algorithm
[ 0.535752] SCSI subsystem initialized
[ 0.536474] libata version 3.00 loaded.
[ 0.536862] usbcore: registered new interface driver usbfs
[ 0.537006] usbcore: registered new interface driver hub
[ 0.537109] usbcore: registered new device driver usb
[ 0.540465] pci 0000:00:10.0: vgaarb: setting as boot VGA device
[ 0.540507] pci 0000:00:10.0: vgaarb: bridge control possible
[ 0.540525] pci 0000:00:10.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
[ 0.540579] vgaarb: loaded
[ 0.540943] clocksource: Switched to clocksource timebase
[ 0.562749] NET: Registered PF_INET protocol family
[ 0.563451] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.566756] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 10240 bytes, linear)
[ 0.567672] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.568341] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.570129] TCP bind hash table entries: 8192 (order: 6, 327680 bytes, linear)
[ 0.570672] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.571355] UDP hash table entries: 512 (order: 2, 24576 bytes, linear)
[ 0.571542] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes, linear)
[ 0.572335] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.572681] pci 0001:00:12.0: enabling device (0000 -> 0002)
[ 0.572776] pci 0001:00:12.1: enabling device (0000 -> 0002)
[ 0.572839] pci 0001:00:12.2: enabling device (0004 -> 0006)
[ 0.572926] Apple USB OHCI 0001:00:18.0 disabled by firmware
[ 0.572945] pci 0001:00:18.0: Can't enable PCI device, BIOS handoff failed.
[ 0.572969] Apple USB OHCI 0001:00:19.0 disabled by firmware
[ 0.572984] pci 0001:00:19.0: Can't enable PCI device, BIOS handoff failed.
[ 0.573013] pci 0001:00:1b.0: enabling device (0000 -> 0002)
[ 0.573066] pci 0001:00:1b.1: enabling device (0000 -> 0002)
[ 0.573119] pci 0001:00:1b.2: enabling device (0004 -> 0006)
[ 0.573187] pci 0002:00:0f.0: CLS mismatch (32 != 1020), using 32 bytes
[ 0.574325] Thermal assist unit not available
[ 0.576766] Initialise system trusted keyrings
[ 0.577095] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 0.588811] 9p: Installing v9fs 9p2000 file system support
[ 0.589464] NET: Registered PF_ALG protocol family
[ 0.589549] xor: measuring software checksum speed
[ 0.598145] 8regs : 1150 MB/sec
[ 0.608245] 8regs_prefetch : 975 MB/sec
[ 0.616361] 32regs : 1215 MB/sec
[ 0.625593] 32regs_prefetch : 1067 MB/sec
[ 0.627706] altivec : 4710 MB/sec
[ 0.627722] xor: using function: altivec (4710 MB/sec)
[ 0.627753] Key type asymmetric registered
[ 0.627768] Asymmetric key parser 'x509' registered
[ 0.633900] bounce: pool size: 64 pages
[ 0.634368] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.634682] io scheduler bfq registered
[ 0.639580] atomic64_test: passed
[ 0.640251] Using unsupported 1920x1080 (null) at a0008000, depth=8, pitch=2048
[ 0.681978] Console: switching to colour frame buffer device 240x67
[ 0.722166] fb0: Open Firmware frame buffer device on /pci@f0000000/ATY,AlteracParent@10/ATY,Alterac_A@0
[ 0.723289] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.726794] serial 0001:00:15.0: enabling device (0004 -> 0007)
[ 0.728468] 0001:00:15.0: ttyS0 at I/O 0x410 (irq = 58, base_baud = 115200) is a 16550A
[ 0.729247] serial 0001:00:15.1: enabling device (0004 -> 0007)
[ 0.730426] 0001:00:15.1: ttyS1 at I/O 0x400 (irq = 58, base_baud = 115200) is a 16550A
[ 0.732774] MacIO PCI driver attached to Keylargo chipset
[ 0.739590] sata_sil 0001:00:13.0: version 2.4
[ 0.739939] sata_sil 0001:00:13.0: enabling device (0004 -> 0007)
[ 0.742422] scsi host0: sata_sil
[ 0.743804] scsi host1: sata_sil
[ 0.744645] ata1: SATA max UDMA/100 mmio m512@0x80082000 tf 0x80082080 irq 53 lpm-pol 0
[ 0.744902] ata2: SATA max UDMA/100 mmio m512@0x80082000 tf 0x800820c0 irq 53 lpm-pol 0
[ 0.745506] pata-pci-macio 0002:00:0d.0: enabling device (0004 -> 0006)
[ 0.760953] pata-pci-macio 0002:00:0d.0: Activating pata-macio chipset UniNorth ATA-6, Apple bus ID 3
[ 0.762888] scsi host2: pata_macio
[ 0.763418] ata3: PATA max UDMA/100 irq 39 lpm-pol 0
[ 1.057305] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1.060267] ata1.00: ATA-9: SanDisk SSD PLUS 240GB, UF4500RL, max UDMA/133
[ 1.060489] ata1.00: 468877312 sectors, multi 1: LBA48 NCQ (depth 0/32)
[ 1.062250] ata1.00: Features: Dev-Sleep
[ 1.088146] ata1.00: configured for UDMA/100
[ 1.089073] scsi 0:0:0:0: Direct-Access ATA SanDisk SSD PLUS 00RL PQ: 0 ANSI: 5
[ 1.091724] sd 0:0:0:0: [sda] 468877312 512-byte logical blocks: (240 GB/224 GiB)
[ 1.092078] sd 0:0:0:0: [sda] Write Protect is off
[ 1.092241] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.092483] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.092876] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 1.096694] sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[ 1.099349] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.514293] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1.516859] ata2.00: ATA-9: WDC WD5000LPLX-60ZNTT1, 02.01A02, max UDMA/133
[ 1.517080] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 1.519773] ata2.00: configured for UDMA/100
[ 1.520501] scsi 1:0:0:0: Direct-Access ATA WDC WD5000LPLX-6 1A02 PQ: 0 ANSI: 5
[ 1.522974] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.523229] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1.523458] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.523619] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.523859] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.524249] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
[ 1.787620] pata-macio 0.0001f000:ata-4: Activating pata-macio chipset KeyLargo ATA-4, Apple bus ID 2
[ 1.798560] scsi host3: pata_macio
[ 1.808228] ata4: PATA max UDMA/66 irq 19 lpm-pol 0
[ 1.976891] ata4.00: CFA: DeLOCK 54143 512MB, 100511E, max UDMA/66
[ 1.986120] ata4.00: 1009008 sectors, multi 1: LBA
[ 2.280981] sdb: [mac] sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8
[ 2.292691] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.302664] scsi 3:0:0:0: Direct-Access ATA DeLOCK 54143 512 11E PQ: 0 ANSI: 5
[ 2.314307] sd 3:0:0:0: [sdc] 1009008 512-byte logical blocks: (517 MB/493 MiB)
[ 2.323787] sd 3:0:0:0: [sdc] Write Protect is off
[ 2.333078] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.342504] sd 3:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.352186] sd 3:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
[ 2.364569] sdc: [mac] sdc1 sdc2 sdc3 sdc4 sdc5 sdc6
[ 2.376062] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 2.854284] pata-macio 0.00020000:ata-3: Activating pata-macio chipset KeyLargo ATA-3, Apple bus ID 0
[ 2.865921] scsi host4: pata_macio
[ 2.876197] ata5: PATA max MWDMA2 irq 20 lpm-pol 0
[ 2.886553] sungem.c:v1.0 David S. Miller <davem@redhat.com>
[ 2.898153] gem 0002:00:0f.0 eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0a:95:9c:76:3a
[ 2.909051] ehci-pci 0001:00:12.2: EHCI Host Controller
[ 2.919180] ehci-pci 0001:00:12.2: new USB bus registered, assigned bus number 1
[ 2.929543] rtc-generic rtc-generic: registered as rtc0
[ 2.929732] ehci-pci 0001:00:12.2: irq 52, io mem 0x80081000
[ 2.940178] PowerMac i2c bus pmu 2 registered
[ 2.960110] PowerMac i2c bus pmu 1 registered
[ 2.960945] ehci-pci 0001:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.970557] PowerMac i2c bus mac-io 0 registered
[ 2.980028] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08
[ 2.989396] i2c i2c-2: No i2c address for /pci@f2000000/mac-io@17/i2c@18000/i2c-modem
[ 2.998999] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.009067] PowerMac i2c bus uni-n 1 registered
[ 3.018533] usb usb1: Product: EHCI Host Controller
[ 3.018542] usb usb1: Manufacturer: Linux 6.8.9-gentoo-PMacG4 ehci_hcd
[ 3.018549] usb usb1: SerialNumber: 0001:00:12.2
[ 3.029112] hub 1-0:1.0: USB hub found
[ 3.037836] i2c i2c-3: i2c-powermac: modalias failure on /uni-n@f8000000/i2c@f8001000/cereal@1c0
[ 3.047761] hub 1-0:1.0: 5 ports detected
[ 3.057776] PowerMac i2c bus uni-n 0 registered
[ 3.069655] ata5.00: ATAPI: _NEC DVD_RW ND-3520A, 1.04, max UDMA/33
[ 3.077134] ehci-pci 0001:00:1b.2: EHCI Host Controller
[ 3.117797] hid: raw HID events driver (C) Jiri Kosina
[ 3.127649] ehci-pci 0001:00:1b.2: new USB bus registered, assigned bus number 2
[ 3.128052] usbcore: registered new interface driver usbhid
[ 3.138095] ehci-pci 0001:00:1b.2: irq 63, io mem 0x80080000
[ 3.147620] usbhid: USB HID core driver
[ 3.167528] scsi 4:0:0:0: CD-ROM _NEC DVD_RW ND-3520A 1.04 PQ: 0 ANSI: 5
[ 3.168847] NET: Registered PF_INET6 protocol family
[ 3.177854] ehci-pci 0001:00:1b.2: USB 2.0 started, EHCI 1.00
[ 3.191023] Segment Routing with IPv6
[ 3.199292] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.08
[ 3.207989] In-situ OAM (IOAM) with IPv6
[ 3.217884] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.228669] 9pnet: Installing 9P2000 support
[ 3.238181] usb usb2: Product: EHCI Host Controller
[ 3.238191] usb usb2: Manufacturer: Linux 6.8.9-gentoo-PMacG4 ehci_hcd
[ 3.248829] drmem: No dynamic reconfiguration memory found
[ 3.258490] usb usb2: SerialNumber: 0001:00:1b.2
[ 3.259571] hub 2-0:1.0: USB hub found
[ 3.288662] registered taskstats version 1
[ 3.289224] hub 2-0:1.0: 5 ports detected
[ 3.299829] Loading compiled-in X.509 certificates
[ 3.328921] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 3.339078] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.349268] usb 1-5: new high-speed USB device number 2 using ehci-pci
[ 3.369876] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 3.493263] zswap: loaded using pool zstd/zsmalloc
[ 3.504026] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers
[ 3.514600] page_owner is disabled
[ 3.524959] usb 1-5: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98
[ 3.535319] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.545435] usb 1-5: Product: USB2.0 Hub
[ 3.556762] hub 1-5:1.0: USB hub found
[ 3.559550] Btrfs loaded, zoned=no, fsverity=no
[ 3.583692] hub 1-5:1.0: 4 ports detected
[ 3.880951] usb 1-5.1: new low-speed USB device number 3 using ehci-pci
[ 4.019185] usb 1-5.1: New USB device found, idVendor=04d9, idProduct=0006, bcdDevice= 1.40
[ 4.029313] usb 1-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.039345] usb 1-5.1: Product: RPI Wired Keyboard 5
[ 4.049271] usb 1-5.1: Manufacturer:
[ 4.074173] input: RPI Wired Keyboard 5 as /devices/pci0001:00/0001:00:12.2/usb1/1-5/1-5.1/1-5.1:1.0/0003:04D9:0006.0001/input/input0
[ 4.142217] hid-generic 0003:04D9:0006.0001: input,hidraw0: USB HID v1.11 Keyboard [ RPI Wired Keyboard 5] on usb-0001:00:12.2-5.1/input0
[ 4.166085] input: RPI Wired Keyboard 5 as /devices/pci0001:00/0001:00:12.2/usb1/1-5/1-5.1/1-5.1:1.1/0003:04D9:0006.0002/input/input1
[ 4.231500] hid-generic 0003:04D9:0006.0002: input,hidraw1: USB HID v1.11 Device [ RPI Wired Keyboard 5] on usb-0001:00:12.2-5.1/input1
[ 4.320960] usb 1-5.3: new low-speed USB device number 4 using ehci-pci
[ 4.432077] usb 1-5.3: New USB device found, idVendor=275d, idProduct=0ba6, bcdDevice= 1.00
[ 4.442834] usb 1-5.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.453484] usb 1-5.3: Product: USB OPTICAL MOUSE
[ 4.469038] input: USB OPTICAL MOUSE as /devices/pci0001:00/0001:00:12.2/usb1/1-5/1-5.3/1-5.3:1.0/0003:275D:0BA6.0003/input/input2
[ 4.480668] hid-generic 0003:275D:0BA6.0003: input,hidraw2: USB HID v1.11 Mouse [USB OPTICAL MOUSE ] on usb-0001:00:12.2-5.3/input0
[ 4.883212] input: PMU as /devices/virtual/input/input3
[ 4.894779] netpoll: netconsole: local port 6666
[ 4.905980] netpoll: netconsole: local IPv4 address 192.168.2.8
[ 4.917134] netpoll: netconsole: interface 'eth0'
[ 4.928211] netpoll: netconsole: remote port 6666
[ 4.939144] netpoll: netconsole: remote IPv4 address 192.168.2.3
[ 4.949988] netpoll: netconsole: remote ethernet address a8:a1:59:16:4f:ea
[ 4.960792] netpoll: netconsole: device eth0 not up yet, forcing it
[ 5.048003] sungem_phy: PHY ID: 2060e1, addr: 0
[ 5.059002] gem 0002:00:0f.0 eth0: Found BCM5421 PHY
[ 8.747948] gem 0002:00:0f.0 eth0: Link is up at 1000 Mbps, full-duplex
[ 8.758798] gem 0002:00:0f.0 eth0: Pause is enabled (rxfifo: 10240 off: 7168 on: 5632)
[ 8.771470] printk: legacy console [netcon0] enabled
[ 8.790073] netconsole: network logging started
[ 8.816767] EXT4-fs (sda5): mounted filesystem fa07e66f-b4f9-404f-85d8-487d3c097aec ro with ordered data mode. Quota mode: disabled.
[ 8.828228] VFS: Mounted root (ext4 filesystem) readonly on device 8:5.
[ 8.842946] devtmpfs: mounted
[ 8.856964] Freeing unused kernel image (initmem) memory: 1356K
[ 8.884140] Checked W+X mappings: passed, no W+X pages found
[ 8.895148] rodata_test: all tests were successful
[ 8.906005] Run /sbin/init as init process
[ 8.916790] with arguments:
[ 8.927532] /sbin/init
[ 8.938149] with environment:
[ 8.948665] HOME=/
[ 8.959109] TERM=linux
[ 13.266558] ohci-pci 0001:00:12.0: OHCI PCI host controller
[ 13.277181] ohci-pci 0001:00:12.0: new USB bus registered, assigned bus number 3
[ 13.394538] ohci-pci 0001:00:12.0: irq 52, io mem 0x8008c000
[ 13.480831] b43-pci-bridge 0001:00:16.0: enabling device (0004 -> 0006)
[ 13.545452] ssb: Found chip with id 0x4306, rev 0x02 and package 0x00
[ 13.571454] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.08
[ 13.581037] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.590322] usb usb3: Product: OHCI PCI host controller
[ 13.599596] usb usb3: Manufacturer: Linux 6.8.9-gentoo-PMacG4 ohci_hcd
[ 13.608744] usb usb3: SerialNumber: 0001:00:12.0
[ 13.626933] b43-pci-bridge 0001:00:16.0: Sonics Silicon Backplane found on PCI device 0001:00:16.0
[ 13.671685] hub 3-0:1.0: USB hub found
[ 13.721175] hub 3-0:1.0: 3 ports detected
[ 13.842798] ohci-pci 0001:00:12.1: OHCI PCI host controller
[ 13.857743] ohci-pci 0001:00:12.1: new USB bus registered, assigned bus number 4
[ 13.875568] ohci-pci 0001:00:12.1: irq 52, io mem 0x8008b000
[ 13.988808] [drm] radeon kernel modesetting enabled.
[ 13.998974] Console: switching to colour dummy device 80x25
[ 14.003027] radeon 0000:00:10.0: enabling device (0006 -> 0007)
[ 14.004092] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.08
[ 14.004148] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.004205] usb usb4: Product: OHCI PCI host controller
[ 14.004246] usb usb4: Manufacturer: Linux 6.8.9-gentoo-PMacG4 ohci_hcd
[ 14.004335] usb usb4: SerialNumber: 0001:00:12.1
[ 14.005695] [drm] initializing kernel modesetting (RV350 0x1002:0x4150 0x1002:0x0002 0x00).
[ 14.005762] [drm] Forcing AGP to PCI mode
[ 14.005909] radeon 0000:00:10.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0x0000
[ 14.064517] hub 4-0:1.0: USB hub found
[ 14.064718] hub 4-0:1.0: 2 ports detected
[ 14.066139] Apple USB OHCI 0001:00:18.0 disabled by firmware
[ 14.066246] Apple USB OHCI 0001:00:19.0 disabled by firmware
[ 14.066421] ohci-pci 0001:00:1b.0: OHCI PCI host controller
[ 14.066482] ohci-pci 0001:00:1b.0: new USB bus registered, assigned bus number 5
[ 14.066896] ohci-pci 0001:00:1b.0: irq 63, io mem 0x80084000
[ 14.070597] [drm] Generation 2 PCI interface, using max accessible memory
[ 14.070672] radeon 0000:00:10.0: VRAM: 256M 0x00000000A0000000 - 0x00000000AFFFFFFF (256M used)
[ 14.070715] radeon 0000:00:10.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
[ 14.071142] [drm] Detected VRAM RAM=256M, BAR=256M
[ 14.071182] [drm] RAM width 128bits DDR
[ 14.073125] [drm] radeon: 256M of VRAM memory ready
[ 14.073207] [drm] radeon: 512M of GTT memory ready.
[ 14.073431] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 14.082971] [drm] radeon: 1 quad pipes, 1 Z pipes initialized
[ 14.083072] [drm] PCI GART of 512M enabled (table at 0x0000000003700000).
[ 14.083437] radeon 0000:00:10.0: WB enabled
[ 14.083507] radeon 0000:00:10.0: fence driver on ring 0 use gpu addr 0x0000000080000000
[ 14.085436] [drm] radeon: irq initialized.
[ 14.085598] [drm] Loading R300 Microcode
[ 14.085673] Loading firmware: radeon/R300_cp.bin
[ 14.184895] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.08
[ 14.185012] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.185053] usb usb5: Product: OHCI PCI host controller
[ 14.185085] usb usb5: Manufacturer: Linux 6.8.9-gentoo-PMacG4 ohci_hcd
[ 14.185161] usb usb5: SerialNumber: 0001:00:1b.0
[ 14.201458] [drm] radeon: ring at 0x0000000080001000
[ 14.201639] [drm] ring test succeeded in 1 usecs
[ 14.210669] hub 5-0:1.0: USB hub found
[ 14.210895] hub 5-0:1.0: 3 ports detected
[ 14.234448] [drm] ib test succeeded in 0 usecs
[ 14.234640] stackdepot: allocating hash table of 65536 entries via kvcalloc
[ 14.235459] ohci-pci 0001:00:1b.1: OHCI PCI host controller
[ 14.235617] ohci-pci 0001:00:1b.1: new USB bus registered, assigned bus number 6
[ 14.235881] ohci-pci 0001:00:1b.1: irq 63, io mem 0x80083000
[ 14.301992] [drm] Radeon Display Connectors
[ 14.302069] [drm] Connector 0:
[ 14.302126] [drm] DVI-I-1
[ 14.302160] [drm] HPD2
[ 14.302193] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 14.302226] [drm] Encoders:
[ 14.302252] [drm] CRT1: INTERNAL_DAC1
[ 14.302279] [drm] DFP2: INTERNAL_DVO1
[ 14.302304] [drm] Connector 1:
[ 14.302330] [drm] DVI-I-2
[ 14.302355] [drm] HPD1
[ 14.302381] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 14.302412] [drm] Encoders:
[ 14.302447] [drm] CRT2: INTERNAL_DAC2
[ 14.302481] [drm] DFP1: INTERNAL_TMDS1
[ 14.302712] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:10.0 on minor 0
[ 14.387357] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.08
[ 14.387457] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.387524] usb usb6: Product: OHCI PCI host controller
[ 14.387566] usb usb6: Manufacturer: Linux 6.8.9-gentoo-PMacG4 ohci_hcd
[ 14.387656] usb usb6: SerialNumber: 0001:00:1b.1
[ 14.404049] hub 6-0:1.0: USB hub found
[ 14.404376] hub 6-0:1.0: 2 ports detected
[ 14.608546] [drm] fb mappable at 0xA0040000
[ 14.608664] [drm] vram apper at 0xA0000000
[ 14.608691] [drm] size 8294400
[ 14.608717] [drm] fb depth is 24
[ 14.608742] [drm] pitch is 7680
[ 14.674376] Console: switching to colour frame buffer device 240x67
[ 14.727998] radeon 0000:00:10.0: [drm] fb0: radeondrmfb frame buffer device
[ 15.049087] firewire_ohci 0002:00:0e.0: enabling device (0000 -> 0002)
[ 15.124588] firewire_ohci 0002:00:0e.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[ 15.168634] gem 0002:00:0f.0 enP2p0s15: renamed from eth0 (while UP)
[ 15.241571] ADM1030 fan controller [@2c]
[ 15.255370] DS1775 digital thermometer [@49]
[ 15.255616] Temp: 56.3 C
[ 15.255625] Hyst: 70.0 C
[ 15.255748] OS: 75.0 C
[ 15.255905]
[ 15.628382] firewire_core 0002:00:0e.0: created device fw0: GUID 000a95fffe9c763a, S800
[ 15.891394] EXT4-fs (sda5): re-mounted fa07e66f-b4f9-404f-85d8-487d3c097aec r/w. Quota mode: disabled.
[ 15.993618] EXT4-fs (sda5): re-mounted fa07e66f-b4f9-404f-85d8-487d3c097aec r/w. Quota mode: disabled.
[ 16.298280] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 16.347217] snd-aoa-fabric-layout: can use this codec
[ 16.443010] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 16.444934] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 16.445654] Loading firmware: regulatory.db
[ 16.446441] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 16.446843] cfg80211: failed to load regulatory.db
[ 16.588041] b43legacy-phy0: Broadcom 4306 WLAN found (core revision 4)
[ 16.654806] b43legacy-phy0: Loading firmware b43legacy/ucode4.fw
[ 16.655215] Loading firmware: b43legacy/ucode4.fw
[ 16.657241] Broadcom 43xx-legacy driver loaded [ Features: PLID ]
[ 16.657960] b43legacy-phy0: Loading firmware b43legacy/pcm4.fw
[ 16.658297] Loading firmware: b43legacy/pcm4.fw
[ 16.659338] b43legacy-phy0: Loading firmware b43legacy/b0g0initvals2.fw
[ 16.659710] Loading firmware: b43legacy/b0g0initvals2.fw
[ 16.742630] Adding 8388604k swap on /dev/sdb6. Priority:-2 extents:1 across:8388604k
[ 16.955380] random: crng init done
[ 16.960999] EXT4-fs (sdc5): mounting ext2 file system using the ext4 subsystem
[ 16.988539] EXT4-fs (sdc5): warning: mounting unchecked fs, running e2fsck is recommended
[ 17.005996] EXT4-fs (sdc5): mounted filesystem e4e8af9e-0f0d-44f9-b983-71bf61d782de r/w without journal. Quota mode: disabled.
[ 17.022050] ext2 filesystem being mounted at /boot supports timestamps until 2038-01-19 (0x7fffffff)
[ 17.040015] BTRFS: device label tmp devid 1 transid 4222 /dev/sda6 scanned by mount (896)
[ 17.058523] BTRFS info (device sda6): first mount of filesystem 65162d91-887e-4e48-a356-fbf7093eefb5
[ 17.072268] BTRFS info (device sda6): using xxhash64 (xxhash64-generic) checksum algorithm
[ 17.088846] BTRFS info (device sda6): using free-space-tree
[ 72.285833] kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0
[ 72.285964] CPU: 1 PID: 40 Comm: kswapd0 Not tainted 6.8.9-gentoo-PMacG4 #1
[ 72.285993] Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
[ 72.286016] Call Trace:
[ 72.286035] [effe5cc0] [c0784b64] dump_stack_lvl+0x80/0xac (unreliable)
[ 72.286092] [effe5ce0] [c01aef80] warn_alloc+0x100/0x178
[ 72.286172] [effe5d40] [c01af34c] __alloc_pages+0x354/0x8ac
[ 72.286238] [effe5e00] [c01af988] page_frag_alloc_align+0x68/0x17c
[ 72.286279] [effe5e30] [c063b7b4] __netdev_alloc_skb+0xb4/0x17c
[ 72.286324] [effe5e60] [be99573c] setup_rx_descbuffer+0x40/0x144 [b43legacy]
[ 72.286418] [effe5e90] [be99687c] b43legacy_dma_rx+0x20c/0x278 [b43legacy]
[ 72.286470] [effe5ee0] [be9897f4] b43legacy_interrupt_tasklet+0x580/0x5a4 [b43legacy]
[ 72.286522] [effe5f50] [c0050b34] tasklet_action_common.isra.0+0xb0/0xe8
[ 72.286565] [effe5f80] [c07aaf5c] __do_softirq+0x1dc/0x218
[ 72.286604] [effe5ff0] [c0008820] do_softirq_own_stack+0x34/0x40
[ 72.286648] [c1c555f0] [c07ff5f0] 0xc07ff5f0
[ 72.286685] [c1c55610] [c0050384] __irq_exit_rcu+0x6c/0xbc
[ 72.286723] [c1c55620] [c00507f8] irq_exit+0x10/0x20
[ 72.286760] [c1c55630] [c00045b4] HardwareInterrupt_virt+0x108/0x10c
[ 72.286799] --- interrupt: 500 at BIT_flushBits+0x1c/0x58
[ 72.286846] NIP: c0458840 LR: c0458fdc CTR: 00000000
[ 72.286875] REGS: c1c55640 TRAP: 0500 Not tainted (6.8.9-gentoo-PMacG4)
[ 72.286906] MSR: 0220b032 <VEC,EE,FP,ME,IR,DR,RI> CR: 88082202 XER: 00000000
[ 72.286980]
[ 72.286980] GPR00: c0458f98 c1c55700 c1c2b9a0 c1c5575c 00000000 00000000 00000000 00000000
[ 72.286980] GPR08: 00000000 00000000 f2c1d0d5 c1c55710 88084202 00000000 f2c1e000 f35f8150
[ 72.286980] GPR16: 00000000 f34bf238 f34bf30c 00000000 0000001b 00000002 00000000 00000000
[ 72.286980] GPR24: f35f8150 00000080 f35f7950 f35f7d50 00000000 c07ff5f0 00000052 f35f5be0
[ 72.287185] NIP [c0458840] BIT_flushBits+0x1c/0x58
[ 72.287220] LR [c0458fdc] ZSTD_encodeSequences+0x2ac/0x308
[ 72.287255] --- interrupt: 500
[ 72.287283] [c1c55700] [c07ff5f0] 0xc07ff5f0 (unreliable)
[ 72.287323] [c1c55710] [c0458f98] ZSTD_encodeSequences+0x268/0x308
[ 72.287363] [c1c557b0] [c0452eb0] ZSTD_entropyCompressSeqStore.constprop.0+0x1c4/0x2bc
[ 72.287403] [c1c55840] [c045357c] ZSTD_compressBlock_internal+0xac/0x144
[ 72.287442] [c1c55870] [c04543c8] ZSTD_compressContinue_internal+0x734/0x7c0
[ 72.287482] [c1c55920] [c04559d4] ZSTD_compressEnd+0x2c/0x13c
[ 72.287520] [c1c55950] [c04574b0] ZSTD_compressStream2+0x1b8/0x508
[ 72.287560] [c1c559a0] [c045788c] ZSTD_compressStream2_simpleArgs+0x48/0x60
[ 72.287600] [c1c559e0] [c0457904] ZSTD_compress2+0x60/0x90
[ 72.287640] [c1c55a10] [c03d0abc] __zstd_compress+0x54/0x78
[ 72.287679] [c1c55a70] [c03c3794] scomp_acomp_comp_decomp+0xe8/0x16c
[ 72.287719] [c1c55aa0] [c01c4c80] zswap_store+0x4b4/0x668
[ 72.287760] [c1c55b20] [c01bc404] swap_writepage+0x3c/0xa8
[ 72.288830] [c1c55b40] [c0172dd4] pageout+0x11c/0x1ec
[ 72.289097] [c1c55bc0] [c0174e2c] shrink_folio_list+0x6b0/0x878
[ 72.289140] [c1c55c40] [c01767e8] evict_folios+0x9d4/0xd08
[ 72.289180] [c1c55d40] [c0176cec] try_to_shrink_lruvec+0x1d0/0x210
[ 72.289219] [c1c55da0] [c0176dcc] shrink_one+0xa0/0x134
[ 72.289257] [c1c55dd0] [c01786a4] shrink_node+0x248/0x844
[ 72.289294] [c1c55e50] [c0178f68] balance_pgdat+0x2c8/0x614
[ 72.289331] [c1c55f50] [c01794cc] kswapd+0x218/0x24c
[ 72.289368] [c1c55fc0] [c006aae4] kthread+0xe4/0xe8
[ 72.289414] [c1c55ff0] [c0015304] start_kernel_thread+0x10/0x14
[ 72.289463] Mem-Info:
[ 72.289493] active_anon:247864 inactive_anon:215615 isolated_anon:0
[ 72.289493] active_file:9633 inactive_file:12323 isolated_file:0
[ 72.289493] unevictable:4 dirty:0 writeback:2
[ 72.289493] slab_reclaimable:1293 slab_unreclaimable:6904
[ 72.289493] mapped:16876 shmem:155 pagetables:899
[ 72.289493] sec_pagetables:0 bounce:0
[ 72.289493] kernel_misc_reclaimable:0
[ 72.289493] free:2224 free_pcp:596 free_cma:0
[ 72.289547] Node 0 active_anon:991456kB inactive_anon:862460kB active_file:38532kB inactive_file:49292kB unevictable:16kB isolated(anon):0kB isolated(file):0kB mapped:67504kB dirty:0kB writeback:8kB shmem:620kB writeback_tmp:0kB kernel_stack:1536kB pagetables:3596kB sec_pagetables:0kB all_unreclaimable? no
[ 72.289599] DMA free:1680kB boost:4096kB min:7548kB low:8408kB high:9268kB reserved_highatomic:0KB active_anon:675928kB inactive_anon:5644kB active_file:124kB inactive_file:596kB unevictable:0kB writepending:0kB present:786432kB managed:746656kB mlocked:0kB bounce:0kB free_pcp:2384kB local_pcp:1004kB free_cma:0kB
[ 72.289651] lowmem_reserve[]: 0 0 1280 1280
[ 72.289698] DMA: 2*4kB (UM) 1*8kB (U) 1*16kB (U) 18*32kB (UME) 7*64kB (UM) 0*128kB 1*256kB (M) 1*512kB (M) 0*1024kB 0*2048kB 0*4096kB = 1824kB
[ 72.289816] 35907 total pagecache pages
[ 72.289842] 13813 pages in swap cache
[ 72.289868] Free swap = 8270180kB
[ 80.058408] CPU-temp: 57.0 C
[ 80.058446] , Case: 34.0 C
[ 80.059522] , Fan: 3 (tuned +3)
[ 121.016157] b43legacy-phy0 warning: Unexpected value for chanstat (0x7C00)
[ 152.080597] BTRFS info (device sda6): last unmount of filesystem 65162d91-887e-4e48-a356-fbf7093eefb5
[ 152.127885] EXT4-fs (sdc5): unmounting filesystem e4e8af9e-0f0d-44f9-b983-71bf61d782de.
[ 155.015271] b43legacy-phy0 warning: Unexpected value for chanstat (0x7C00)
[ 155.127139] elogind-daemon[1544]: Received signal 15 [TERM]
[ 155.737910] EXT4-fs (sda5): re-mounted fa07e66f-b4f9-404f-85d8-487d3c097aec ro. Quota mode: disabled.
[ 155.873192] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 155.873833] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 155.874935] reboot: Restarting system
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-05-08 18:21 kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc) Erhard Furtner
@ 2024-05-15 20:45 ` Erhard Furtner
2024-05-15 22:06 ` Yu Zhao
0 siblings, 1 reply; 45+ messages in thread
From: Erhard Furtner @ 2024-05-15 20:45 UTC (permalink / raw)
To: linux-mm; +Cc: linux-kernel, linuxppc-dev
[-- Attachment #1: Type: text/plain, Size: 14656 bytes --]
On Wed, 8 May 2024 20:21:11 +0200
Erhard Furtner <erhard_f@mailbox.org> wrote:
> Greetings!
>
> Got that on my dual CPU PowerMac G4 DP shortly after boot. This does not happen every time at bootup though:
>
> [...]
> kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0
> CPU: 1 PID: 40 Comm: kswapd0 Not tainted 6.8.9-gentoo-PMacG4 #1
> Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
Very similar page allocation failure on the same machine on kernel 6.9.0 too. Seems it can easily be provoked by running a memory stressor, e.g. "stress-ng --vm 2 --vm-bytes 1930M --verify -v":
[...]
kswapd0: page allocation failure: order:0, mode:0xcc0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0
CPU: 0 PID: 41 Comm: kswapd0 Not tainted 6.9.0-gentoo-PMacG4 #1
Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
Call Trace:
[c1c65940] [c07926d4] dump_stack_lvl+0x80/0xac (unreliable)
[c1c65960] [c01b6234] warn_alloc+0x100/0x178
[c1c659c0] [c01b661c] __alloc_pages+0x370/0x8d0
[c1c65a80] [c01c4854] __read_swap_cache_async+0xc0/0x1cc
[c1c65ad0] [c01cb580] zswap_writeback_entry+0x50/0x154
[c1c65be0] [c01cb6f4] shrink_memcg_cb+0x70/0xec
[c1c65c10] [c019518c] __list_lru_walk_one+0xa0/0x154
[c1c65c70] [c01952a4] list_lru_walk_one+0x64/0x7c
[c1c65ca0] [c01cad00] zswap_shrinker_scan+0xac/0xc4
[c1c65cd0] [c018052c] do_shrink_slab+0x18c/0x304
[c1c65d20] [c0180a40] shrink_slab+0x174/0x260
[c1c65da0] [c017cb0c] shrink_one+0xbc/0x134
[c1c65dd0] [c017e3e4] shrink_node+0x238/0x84c
[c1c65e50] [c017ed38] balance_pgdat+0x340/0x650
[c1c65f50] [c017f270] kswapd+0x228/0x25c
[c1c65fc0] [c006bbac] kthread+0xe4/0xe8
[c1c65ff0] [c0015304] start_kernel_thread+0x10/0x14
SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
node 0: slabs: 15, objs: 225, free: 0
SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
node 0: slabs: 15, objs: 225, free: 0
SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
node 0: slabs: 15, objs: 225, free: 0
SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
node 0: slabs: 15, objs: 225, free: 0
SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
node 0: slabs: 15, objs: 225, free: 0
SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
node 0: slabs: 33, objs: 165, free: 0
SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
node 0: slabs: 15, objs: 225, free: 0
SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
node 0: slabs: 33, objs: 165, free: 0
SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
node 0: slabs: 15, objs: 225, free: 0
SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
node 0: slabs: 33, objs: 165, free: 0
Mem-Info:
active_anon:340071 inactive_anon:139179 isolated_anon:0
active_file:8297 inactive_file:2506 isolated_file:0
unevictable:4 dirty:1 writeback:18
slab_reclaimable:1377 slab_unreclaimable:7426
mapped:6804 shmem:112 pagetables:946
sec_pagetables:0 bounce:0
kernel_misc_reclaimable:0
free:1141 free_pcp:7 free_cma:0
Node 0 active_anon:1360284kB inactive_anon:556716kB active_file:33188kB inactive_file:10024kB unevictable:16kB isolated(anon):0kB isolated(file):0kB mapped:27216kB dirty:4kB writeback:72kB shmem:448kB writeback_tmp:0kB kernel_stack:1560kB pagetables:3784kB sec_pagetables:0kB all_unreclaimable? no
DMA free:56kB boost:7756kB min:11208kB low:12068kB high:12928kB reserved_highatomic:0KB active_anon:635128kB inactive_anon:58260kB active_file:268kB inactive_file:3000kB unevictable:0kB writepending:324kB present:786432kB managed:746644kB mlocked:0kB bounce:0kB free_pcp:28kB local_pcp:28kB free_cma:0kB
lowmem_reserve[]: 0 0 1280 1280
DMA: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 0kB
63943 total pagecache pages
53024 pages in swap cache
Free swap = 8057248kB
Total swap = 8388604kB
524288 pages RAM
327680 pages HighMem/MovableOnly
9947 pages reserved
warn_alloc: 396 callbacks suppressed
kswapd0: page allocation failure: order:0, mode:0xcc0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0
CPU: 1 PID: 41 Comm: kswapd0 Not tainted 6.9.0-gentoo-PMacG4 #1
Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
Call Trace:
[c1c65940] [c07926d4] dump_stack_lvl+0x80/0xac (unreliable)
[c1c65960] [c01b6234] warn_alloc+0x100/0x178
[c1c659c0] [c01b661c] __alloc_pages+0x370/0x8d0
[c1c65a80] [c01c4854] __read_swap_cache_async+0xc0/0x1cc
[c1c65ad0] [c01cb580] zswap_writeback_entry+0x50/0x154
[c1c65be0] [c01cb6f4] shrink_memcg_cb+0x70/0xec
[c1c65c10] [c019518c] __list_lru_walk_one+0xa0/0x154
[c1c65c70] [c01952a4] list_lru_walk_one+0x64/0x7c
[c1c65ca0] [c01cad00] zswap_shrinker_scan+0xac/0xc4
[c1c65cd0] [c018052c] do_shrink_slab+0x18c/0x304
[c1c65d20] [c0180a40] shrink_slab+0x174/0x260
[c1c65da0] [c017cb0c] shrink_one+0xbc/0x134
[c1c65dd0] [c017e3e4] shrink_node+0x238/0x84c
[c1c65e50] [c017ed38] balance_pgdat+0x340/0x650
[c1c65f50] [c017f270] kswapd+0x228/0x25c
slab_out_of_memory: 53 callbacks suppressed
SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
node 0: slabs: 18, objs: 270, free: 0
SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
node 0: slabs: 18, objs: 270, free: 0
SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
node 0: slabs: 18, objs: 270, free: 0
SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
node 0: slabs: 18, objs: 270, free: 0
SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
node 0: slabs: 18, objs: 270, free: 0
SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
node 0: slabs: 33, objs: 165, free: 0
SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
node 0: slabs: 18, objs: 270, free: 0
SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
node 0: slabs: 33, objs: 165, free: 0
SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
node 0: slabs: 18, objs: 270, free: 0
SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
node 0: slabs: 33, objs: 165, free: 0
[c1c65fc0] [c006bbac] kthread+0xe4/0xe8
[c1c65ff0] [c0015304] start_kernel_thread+0x10/0x14
Mem-Info:
active_anon:351976 inactive_anon:123514 isolated_anon:0
active_file:4648 inactive_file:2081 isolated_file:0
unevictable:4 dirty:1 writeback:39
slab_reclaimable:918 slab_unreclaimable:7222
mapped:5359 shmem:21 pagetables:940
sec_pagetables:0 bounce:0
kernel_misc_reclaimable:0
free:2563 free_pcp:142 free_cma:0
Node 0 active_anon:1407904kB inactive_anon:494056kB active_file:18592kB inactive_file:8324kB unevictable:16kB isolated(anon):0kB isolated(file):0kB mapped:21436kB dirty:4kB writeback:156kB shmem:84kB writeback_tmp:0kB kernel_stack:1552kB pagetables:3760kB sec_pagetables:0kB all_unreclaimable? no
DMA free:0kB boost:7756kB min:11208kB low:12068kB high:12928kB reserved_highatomic:0KB active_anon:199336kB inactive_anon:491432kB active_file:4612kB inactive_file:5980kB unevictable:0kB writepending:660kB present:786432kB managed:746644kB mlocked:0kB bounce:0kB free_pcp:568kB local_pcp:20kB free_cma:0kB
lowmem_reserve[]: 0 0 1280 1280
DMA: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 0kB
45961 total pagecache pages
39207 pages in swap cache
Free swap = 8093096kB
Total swap = 8388604kB
524288 pages RAM
327680 pages HighMem/MovableOnly
9947 pages reserved
warn_alloc: 343 callbacks suppressed
kswapd0: page allocation failure: order:0, mode:0xcc0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0
CPU: 0 PID: 41 Comm: kswapd0 Not tainted 6.9.0-gentoo-PMacG4 #1
Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
Call Trace:
[c1c65940] [c07926d4] dump_stack_lvl+0x80/0xac (unreliable)
[c1c65960] [c01b6234] warn_alloc+0x100/0x178
[c1c659c0] [c01b661c] __alloc_pages+0x370/0x8d0
[c1c65a80] [c01c4854] __read_swap_cache_async+0xc0/0x1cc
[c1c65ad0] [c01cb580] zswap_writeback_entry+0x50/0x154
[c1c65be0] [c01cb6f4] shrink_memcg_cb+0x70/0xec
[c1c65c10] [c019518c] __list_lru_walk_one+0xa0/0x154
slab_out_of_memory: 59 callbacks suppressed
SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
node 0: slabs: 18, objs: 270, free: 0
SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
node 0: slabs: 18, objs: 270, free: 0
SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
node 0: slabs: 18, objs: 270, free: 0
SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
node 0: slabs: 18, objs: 270, free: 0
SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
node 0: slabs: 18, objs: 270, free: 0
SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
node 0: slabs: 33, objs: 165, free: 0
SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
node 0: slabs: 18, objs: 270, free: 0
SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
node 0: slabs: 33, objs: 165, free: 0
SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
node 0: slabs: 18, objs: 270, free: 0
SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
node 0: slabs: 33, objs: 165, free: 0
[c1c65c70] [c01952a4] list_lru_walk_one+0x64/0x7c
[c1c65ca0] [c01cad00] zswap_shrinker_scan+0xac/0xc4
[c1c65cd0] [c018052c] do_shrink_slab+0x18c/0x304
[c1c65d20] [c0180a40] shrink_slab+0x174/0x260
[c1c65da0] [c017cb0c] shrink_one+0xbc/0x134
[c1c65dd0] [c017e3e4] shrink_node+0x238/0x84c
[c1c65e50] [c017ed38] balance_pgdat+0x340/0x650
[c1c65f50] [c017f270] kswapd+0x228/0x25c
[c1c65fc0] [c006bbac] kthread+0xe4/0xe8
[c1c65ff0] [c0015304] start_kernel_thread+0x10/0x14
Mem-Info:
active_anon:235002 inactive_anon:240975 isolated_anon:0
active_file:4356 inactive_file:2551 isolated_file:0
unevictable:4 dirty:7 writeback:19
slab_reclaimable:1008 slab_unreclaimable:7218
mapped:5601 shmem:21 pagetables:939
sec_pagetables:0 bounce:0
kernel_misc_reclaimable:0
free:1340 free_pcp:23 free_cma:0
Node 0 active_anon:940008kB inactive_anon:963900kB active_file:17424kB inactive_file:10204kB unevictable:16kB isolated(anon):0kB isolated(file):0kB mapped:22404kB dirty:28kB writeback:76kB shmem:84kB writeback_tmp:0kB kernel_stack:1552kB pagetables:3756kB sec_pagetables:0kB all_unreclaimable? no
DMA free:0kB boost:7756kB min:11208kB low:12068kB high:12928kB reserved_highatomic:0KB active_anon:644060kB inactive_anon:36332kB active_file:5276kB inactive_file:5516kB unevictable:0kB writepending:348kB present:786432kB managed:746644kB mlocked:0kB bounce:0kB free_pcp:92kB local_pcp:92kB free_cma:0kB
lowmem_reserve[]: 0 0 1280 1280
DMA: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 0kB
116345 total pagecache pages
109413 pages in swap cache
Free swap = 7819300kB
Total swap = 8388604kB
524288 pages RAM
327680 pages HighMem/MovableOnly
9947 pages reserved
I switched from zstd to lzo as zswap default compressor so zstd does not show up on the dmesg. But the rest looks pretty similar.
Full dmesg and kernel .config attached.
Regards,
Erhard
[-- Attachment #2: config_690_g4 --]
[-- Type: application/octet-stream, Size: 116776 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/powerpc 6.9.0-gentoo Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="gcc (Gentoo 13.2.1_p20240210 p14) 13.2.1 20240210"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=130201
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=24200
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=24200
CONFIG_LLD_VERSION=0
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_GOTO_TIED_OUTPUT=y
CONFIG_GCC_ASM_GOTO_OUTPUT_WORKAROUND=y
CONFIG_TOOLS_SUPPORT_RELR=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=0
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION="-PMacG4"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_XZ is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_WATCH_QUEUE=y
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_DOMAIN_NOMAP=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_TIME_KUNIT_TEST=m
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem
CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y
#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
CONFIG_BPF_JIT=y
CONFIG_BPF_JIT_ALWAYS_ON=y
CONFIG_BPF_JIT_DEFAULT_ON=y
CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
# CONFIG_BPF_PRELOAD is not set
# end of BPF subsystem
CONFIG_PREEMPT_VOLUNTARY_BUILD=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting
CONFIG_CPU_ISOLATION=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_TREE_SRCU=y
CONFIG_NEED_SRCU_NMI_SAFE=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem
# CONFIG_IKCONFIG is not set
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=16
CONFIG_LOG_CPU_MAX_BUF_SHIFT=13
# CONFIG_PRINTK_INDEX is not set
#
# Scheduler features
#
# end of Scheduler features
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC10_NO_ARRAY_BOUNDS=y
CONFIG_CC_NO_ARRAY_BOUNDS=y
CONFIG_GCC_NO_STRINGOP_OVERFLOW=y
CONFIG_CC_NO_STRINGOP_OVERFLOW=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
# CONFIG_CGROUP_FAVOR_DYNMODS is not set
CONFIG_MEMCG=y
CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_SCHED_MM_CID=y
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
CONFIG_CGROUP_MISC=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_TIME_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
# CONFIG_RD_ZSTD is not set
# CONFIG_BOOT_CONFIG is not set
# CONFIG_INITRAMFS_PRESERVE_MTIME is not set
# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
# CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_LD_ORPHAN_WARN_LEVEL="warn"
CONFIG_SYSCTL=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_EXPERT=y
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
# CONFIG_SYSFS_SYSCALL is not set
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KCMP=y
CONFIG_RSEQ=y
# CONFIG_DEBUG_RSEQ is not set
CONFIG_CACHESTAT_SYSCALL=y
# CONFIG_PC104 is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_SELFTEST is not set
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_ARCH_HAS_MEMBARRIER_CALLBACKS=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# end of Kernel Performance Events And Counters
CONFIG_SYSTEM_DATA_VERIFICATION=y
# CONFIG_PROFILING is not set
#
# Kexec and crash features
#
# CONFIG_KEXEC is not set
# end of Kexec and crash features
# end of General setup
CONFIG_PPC32=y
# CONFIG_PPC64 is not set
#
# Processor support
#
CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_PPC_BOOK3S_603 is not set
CONFIG_PPC_BOOK3S_604=y
# CONFIG_POWERPC_CPU is not set
# CONFIG_E300C2_CPU is not set
# CONFIG_E300C3_CPU is not set
CONFIG_G4_CPU=y
# CONFIG_TOOLCHAIN_DEFAULT_CPU is not set
CONFIG_TARGET_CPU_BOOL=y
CONFIG_TARGET_CPU="G4"
CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU_REGS=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_KUEP=y
CONFIG_PPC_KUAP=y
# CONFIG_PPC_KUAP_DEBUG is not set
CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_PMU_SYSFS is not set
CONFIG_PPC_PERF_CTRS=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
# end of Processor support
CONFIG_VDSO32=y
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_32BIT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MAX=17
CONFIG_ARCH_MMAP_RND_BITS_MIN=11
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
CONFIG_NR_IRQS=512
CONFIG_NMI_IPI=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_PANIC_TIMEOUT=40
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_TBSYNC=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_HAS_ADD_PAGES=y
# CONFIG_PPC_PCI_OF_BUS_MAP is not set
CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PPC_MSI_BITMAP=y
#
# Platform support
#
# CONFIG_SCOM_DEBUGFS is not set
# CONFIG_PPC_CHRP is not set
# CONFIG_PPC_MPC512x is not set
# CONFIG_PPC_MPC52xx is not set
CONFIG_PPC_PMAC=y
CONFIG_PPC_PMAC32_PSURGE=y
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
CONFIG_KVM_GUEST=y
CONFIG_EPAPR_PARAVIRT=y
CONFIG_PPC_HASH_MMU_NATIVE=y
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_PPC_SMP_MUXED_IPI=y
CONFIG_MPIC=y
CONFIG_MPIC_MSGR=y
CONFIG_PPC_MPC106=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set
#
# CPU frequency scaling drivers
#
# CONFIG_CPUFREQ_DT_PLATDEV is not set
CONFIG_CPU_FREQ_PMAC=y
# end of CPU Frequency scaling
#
# CPUIdle driver
#
#
# CPU Idle
#
# CONFIG_CPU_IDLE is not set
# end of CPU Idle
# end of CPUIdle driver
CONFIG_TAU=y
# CONFIG_TAU_INT is not set
# CONFIG_TAU_AVERAGE is not set
# CONFIG_GEN_RTC is not set
# end of Platform support
#
# Kernel options
#
CONFIG_HIGHMEM=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
CONFIG_HOTPLUG_CPU=y
# CONFIG_PPC_QUEUED_SPINLOCKS is not set
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_ARCH_SUPPORTS_KEXEC=y
CONFIG_ARCH_SUPPORTS_KEXEC_PURGATORY=y
CONFIG_ARCH_SUPPORTS_CRASH_DUMP=y
CONFIG_IRQ_ALL_CPUS=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_PPC_4K_PAGES=y
CONFIG_THREAD_SHIFT=13
CONFIG_DATA_SHIFT=22
CONFIG_ARCH_FORCE_MAX_ORDER=10
CONFIG_CMDLINE=""
CONFIG_EXTRA_TARGETS=""
CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_APM_EMULATION=m
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
# CONFIG_ENERGY_MODEL is not set
# end of Kernel options
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
# CONFIG_FSL_LBC is not set
# end of Bus options
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xb0000000
# end of Advanced setup
# CONFIG_VIRTUALIZATION is not set
CONFIG_HAVE_LIVEPATCH=y
CONFIG_CPU_MITIGATIONS=y
#
# General architecture-dependent options
#
CONFIG_HOTPLUG_SMT=y
CONFIG_SMT_NUM_THREADS_DYNAMIC=y
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_STATIC_CALL_SELFTEST is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_MMU_GATHER_PAGE_SIZE=y
CONFIG_MMU_GATHER_MERGE_VMAS=y
CONFIG_ARCH_WANT_IRQS_OFF_ACTIVATE_MM=y
CONFIG_MMU_LAZY_TLB_REFCOUNT=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
# CONFIG_SECCOMP_CACHE_DEBUG is not set
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
# CONFIG_STACKPROTECTOR_STRONG is not set
CONFIG_LTO_NONE=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING_USER=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOC=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_ARCH_MMAP_RND_BITS=11
CONFIG_HAVE_PAGE_SIZE_4KB=y
CONFIG_PAGE_SIZE_4KB=y
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_PAGE_SHIFT=12
CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y
CONFIG_HAVE_OBJTOOL=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_HAVE_ARCH_NVRAM_OPS=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND=y
CONFIG_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
# CONFIG_VMAP_STACK is not set
CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT=y
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
# CONFIG_STRICT_MODULE_RWX is not set
CONFIG_ARCH_HAS_PHYS_TO_DMA=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_HAVE_STATIC_CALL=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SPLIT_ARG64=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling
CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_GCC_PLUGINS=y
CONFIG_GCC_PLUGIN_LATENT_ENTROPY=y
CONFIG_FUNCTION_ALIGNMENT_4B=y
CONFIG_FUNCTION_ALIGNMENT=4
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_DEBUG is not set
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODULE_UNLOAD_TAINT_TRACKING is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
CONFIG_MODPROBE_PATH="/sbin/modprobe"
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
CONFIG_BLK_CGROUP_RWSTAT=y
CONFIG_BLK_CGROUP_PUNT_BIO=y
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_ICQ=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_WRITE_MOUNTED is not set
# CONFIG_BLK_DEV_ZONED is not set
# CONFIG_BLK_DEV_THROTTLING is not set
CONFIG_BLK_WBT=y
CONFIG_BLK_WBT_MQ=y
# CONFIG_BLK_CGROUP_IOLATENCY is not set
# CONFIG_BLK_CGROUP_IOCOST is not set
# CONFIG_BLK_CGROUP_IOPRIO is not set
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set
# CONFIG_BLK_INLINE_ENCRYPTION is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
CONFIG_BLK_MQ_STACKING=y
#
# IO Schedulers
#
# CONFIG_MQ_IOSCHED_DEADLINE is not set
# CONFIG_MQ_IOSCHED_KYBER is not set
CONFIG_IOSCHED_BFQ=y
CONFIG_BFQ_GROUP_IOSCHED=y
# CONFIG_BFQ_CGROUP_DEBUG is not set
# end of IO Schedulers
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#
CONFIG_ZPOOL=y
CONFIG_SWAP=y
CONFIG_ZSWAP=y
CONFIG_ZSWAP_DEFAULT_ON=y
CONFIG_ZSWAP_SHRINKER_DEFAULT_ON=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo"
# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD is not set
# CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set
CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC=y
CONFIG_ZSWAP_ZPOOL_DEFAULT="zsmalloc"
# CONFIG_ZBUD is not set
# CONFIG_Z3FOLD is not set
CONFIG_ZSMALLOC=y
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_ZSMALLOC_CHAIN_SIZE=8
#
# Slab allocator options
#
CONFIG_SLUB=y
# CONFIG_SLUB_TINY is not set
# CONFIG_SLAB_MERGE_DEFAULT is not set
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLAB_FREELIST_HARDENED=y
# CONFIG_SLUB_STATS is not set
# CONFIG_SLUB_CPU_PARTIAL is not set
CONFIG_RANDOM_KMALLOC_CACHES=y
# end of Slab allocator options
CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
# CONFIG_COMPAT_BRK is not set
CONFIG_FLATMEM=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_ARCH_KEEP_MEMBLOCK=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_PCP_BATCH_SCALE_MAX=5
CONFIG_BOUNCE=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=16384
# CONFIG_CMA is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ZONE_DMA=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not set
# CONFIG_DMAPOOL_TEST is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_KMAP_LOCAL=y
CONFIG_MEMFD_CREATE=y
# CONFIG_ANON_VMA_NAME is not set
CONFIG_USERFAULTFD=y
CONFIG_LRU_GEN=y
CONFIG_LRU_GEN_ENABLED=y
# CONFIG_LRU_GEN_STATS is not set
CONFIG_LOCK_MM_AND_FIND_VMA=y
#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options
CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_NET_XGRESS=y
CONFIG_SKB_EXTENSIONS=y
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_AF_UNIX_OOB=y
CONFIG_UNIX_DIAG=m
CONFIG_TLS=m
CONFIG_TLS_DEVICE=y
# CONFIG_TLS_TOE is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=m
CONFIG_XFRM_USER=m
# CONFIG_XFRM_INTERFACE is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_AH=m
CONFIG_XFRM_ESP=m
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
# CONFIG_XDP_SOCKETS is not set
CONFIG_NET_HANDSHAKE=y
# CONFIG_NET_HANDSHAKE_KUNIT_TEST is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=m
CONFIG_SYN_COOKIES=y
# CONFIG_NET_IPVTI is not set
CONFIG_NET_UDP_TUNNEL=m
# CONFIG_NET_FOU is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
# CONFIG_INET_ESP_OFFLOAD is not set
# CONFIG_INET_ESPINTCP is not set
CONFIG_INET_IPCOMP=m
CONFIG_INET_TABLE_PERTURB_ORDER=16
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
# CONFIG_TCP_CONG_CUBIC is not set
CONFIG_TCP_CONG_WESTWOOD=y
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_NV is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_TCP_CONG_DCTCP is not set
# CONFIG_TCP_CONG_CDG is not set
# CONFIG_TCP_CONG_BBR is not set
CONFIG_DEFAULT_WESTWOOD=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="westwood"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
# CONFIG_INET6_ESP_OFFLOAD is not set
# CONFIG_INET6_ESPINTCP is not set
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
# CONFIG_IPV6_VTI is not set
# CONFIG_IPV6_SIT is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_IPV6_RPL_LWTUNNEL is not set
# CONFIG_IPV6_IOAM6_LWTUNNEL is not set
# CONFIG_NETLABEL is not set
# CONFIG_MPTCP is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_COOKIE_HMAC_SHA1 is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_BRIDGE_MRP is not set
# CONFIG_BRIDGE_CFM is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_CBS is not set
# CONFIG_NET_SCH_ETF is not set
# CONFIG_NET_SCH_TAPRIO is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_SKBPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
# CONFIG_NET_SCH_CODEL is not set
CONFIG_NET_SCH_FQ_CODEL=y
# CONFIG_NET_SCH_CAKE is not set
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
# CONFIG_NET_SCH_PLUG is not set
# CONFIG_NET_SCH_ETS is not set
CONFIG_NET_SCH_DEFAULT=y
CONFIG_DEFAULT_FQ_CODEL=y
# CONFIG_DEFAULT_PFIFO_FAST is not set
CONFIG_DEFAULT_NET_SCH="fq_codel"
#
# Classification
#
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_CLS_CGROUP is not set
# CONFIG_NET_CLS_BPF is not set
# CONFIG_NET_CLS_FLOWER is not set
# CONFIG_NET_CLS_MATCHALL is not set
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
CONFIG_VSOCKETS=m
CONFIG_VSOCKETS_DIAG=m
# CONFIG_VSOCKETS_LOOPBACK is not set
# CONFIG_VIRTIO_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_NET_NSH is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_QRTR is not set
# CONFIG_NET_NCSI is not set
CONFIG_PCPU_DEV_REFCNT=y
CONFIG_MAX_SKB_FRAGS=17
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_STREAM_PARSER=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# end of Network testing
# end of Networking options
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
CONFIG_BT=m
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
CONFIG_BT_LE=y
CONFIG_BT_LE_L2CAP_ECRED=y
# CONFIG_BT_LEDS is not set
CONFIG_BT_MSFTEXT=y
CONFIG_BT_AOSPEXT=y
CONFIG_BT_DEBUGFS=y
# CONFIG_BT_SELFTEST is not set
CONFIG_BT_FEATURE_DEBUG=y
#
# Bluetooth device drivers
#
CONFIG_BT_INTEL=m
CONFIG_BT_BCM=m
CONFIG_BT_RTL=m
CONFIG_BT_MTK=m
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
CONFIG_BT_HCIBTUSB_POLL_SYNC=y
CONFIG_BT_HCIBTUSB_BCM=y
CONFIG_BT_HCIBTUSB_MTK=y
CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_AG6XX=y
CONFIG_BT_HCIBCM203X=m
# CONFIG_BT_HCIBCM4377 is not set
# CONFIG_BT_HCIBPA10X is not set
CONFIG_BT_HCIBFUSB=m
# CONFIG_BT_HCIDTL1 is not set
# CONFIG_BT_HCIBT3C is not set
# CONFIG_BT_HCIBLUECARD is not set
# CONFIG_BT_HCIVHCI is not set
CONFIG_BT_MRVL=m
CONFIG_BT_ATH3K=m
# CONFIG_BT_VIRTIO is not set
# end of Bluetooth device drivers
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_STREAM_PARSER=y
# CONFIG_MCTP is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
# CONFIG_CFG80211_WEXT is not set
CONFIG_CFG80211_KUNIT_TEST=m
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_KUNIT_TEST=m
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
# CONFIG_RFKILL_INPUT is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_FD=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_SOCK_VALIDATE_XMIT=y
CONFIG_NET_SOCK_MSG=y
CONFIG_PAGE_POOL=y
# CONFIG_PAGE_POOL_STATS is not set
CONFIG_FAILOVER=y
CONFIG_ETHTOOL_NETLINK=y
CONFIG_NETDEV_ADDR_LIST_TEST=m
CONFIG_NET_TEST=m
#
# Device Drivers
#
CONFIG_HAVE_PCI=y
CONFIG_FORCE_PCI=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCIEASPM is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_ARCH_FALLBACKS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_PCI_DYNAMIC_OF_NODES=y
# CONFIG_PCIE_BUS_TUNE_OFF is not set
CONFIG_PCIE_BUS_DEFAULT=y
# CONFIG_PCIE_BUS_SAFE is not set
# CONFIG_PCIE_BUS_PERFORMANCE is not set
# CONFIG_PCIE_BUS_PEER2PEER is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=4
# CONFIG_HOTPLUG_PCI is not set
#
# PCI controller drivers
#
# CONFIG_PCI_FTPCI100 is not set
# CONFIG_PCI_HOST_GENERIC is not set
# CONFIG_PCIE_MICROCHIP_HOST is not set
# CONFIG_PCIE_XILINX is not set
#
# Cadence-based PCIe controllers
#
# CONFIG_PCIE_CADENCE_PLAT_HOST is not set
# end of Cadence-based PCIe controllers
#
# DesignWare-based PCIe controllers
#
# CONFIG_PCI_MESON is not set
# CONFIG_PCIE_DW_PLAT_HOST is not set
# end of DesignWare-based PCIe controllers
#
# Mobiveil-based PCIe controllers
#
# end of Mobiveil-based PCIe controllers
# end of PCI controller drivers
#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint
#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers
# CONFIG_CXL_BUS is not set
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
# CONFIG_PCMCIA_LOAD_CIS is not set
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=y
# CONFIG_YENTA_O2 is not set
# CONFIG_YENTA_RICOH is not set
# CONFIG_YENTA_TI is not set
# CONFIG_YENTA_TOSHIBA is not set
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=y
# CONFIG_RAPIDIO is not set
#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_DEVTMPFS_SAFE=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
CONFIG_FW_LOADER_COMPRESS=y
# CONFIG_FW_LOADER_COMPRESS_XZ is not set
CONFIG_FW_LOADER_COMPRESS_ZSTD=y
# CONFIG_FW_UPLOAD is not set
# end of Firmware loader
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_DM_KUNIT_TEST=m
CONFIG_DRIVER_PE_KUNIT_TEST=m
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_KUNIT=m
# CONFIG_REGMAP_BUILD is not set
CONFIG_REGMAP_RAM=m
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_DMA_FENCE_TRACE=y
# CONFIG_FW_DEVLINK_SYNC_STATE_TIMEOUT is not set
# end of Generic Driver Options
#
# Bus devices
#
# CONFIG_MHI_BUS is not set
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices
#
# Cache Drivers
#
# end of Cache Drivers
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
#
# Firmware Drivers
#
#
# ARM System Control and Management Interface Protocol
#
# end of ARM System Control and Management Interface Protocol
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_FW_CFG_SYSFS=m
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# Qualcomm firmware drivers
#
# end of Qualcomm firmware drivers
#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers
# CONFIG_GNSS is not set
# CONFIG_MTD is not set
CONFIG_DTC=y
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_KUNIT_TEST=m
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
# CONFIG_OF_OVERLAY is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_FD is not set
# CONFIG_MAC_FLOPPY is not set
CONFIG_CDROM=y
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_ZRAM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_UBLK is not set
#
# NVME Support
#
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_NVME_FC is not set
# CONFIG_NVME_TCP is not set
# CONFIG_NVME_TARGET is not set
# end of NVME Support
#
# Misc devices
#
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_PHANTOM is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_SRAM is not set
# CONFIG_DW_XDATA_PCIE is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
# CONFIG_OPEN_DICE is not set
# CONFIG_VCPU_STALL_DETECTOR is not set
# CONFIG_NSM is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support
# CONFIG_CB710_CORE is not set
#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline
# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_ALTERA_STAPL is not set
# CONFIG_ECHO is not set
# CONFIG_BCM_VK is not set
# CONFIG_MISC_ALCOR_PCI is not set
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_MISC_RTSX_USB is not set
CONFIG_PVPANIC=y
CONFIG_PVPANIC_MMIO=m
CONFIG_PVPANIC_PCI=m
# end of Misc devices
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_PROC_FS is not set
CONFIG_SCSI_LIB_KUNIT_TEST=m
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=m
CONFIG_BLK_DEV_BSG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_PROTO_TEST=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# end of SCSI Transports
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_MPI3MR is not set
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FDOMAIN_PCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_WD719X is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_MESH is not set
# CONFIG_SCSI_MAC53C94 is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
CONFIG_SCSI_VIRTIO=y
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# end of SCSI device support
CONFIG_ATA=y
CONFIG_SATA_HOST=y
CONFIG_ATA_VERBOSE_ERROR=y
# CONFIG_ATA_FORCE is not set
# CONFIG_SATA_PMP is not set
#
# Controllers with non-SFF native interface
#
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_AHCI_DWC is not set
# CONFIG_AHCI_CEVA is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
CONFIG_SATA_SIL=y
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
CONFIG_PATA_MACIO=y
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_OF_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
# CONFIG_MD_BITMAP_FILE is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=m
CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING=y
# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_UNSTRIPED is not set
CONFIG_DM_CRYPT=m
# CONFIG_DM_SNAPSHOT is not set
CONFIG_DM_THIN_PROVISIONING=m
# CONFIG_DM_CACHE is not set
# CONFIG_DM_WRITECACHE is not set
# CONFIG_DM_ERA is not set
# CONFIG_DM_CLONE is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_RAID is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_DUST is not set
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_DM_LOG_WRITES is not set
# CONFIG_DM_INTEGRITY is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_KUNIT_UAPI_TEST=m
CONFIG_FIREWIRE_KUNIT_DEVICE_ATTRIBUTE_TEST=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_ADB=y
# CONFIG_ADB_CUDA is not set
CONFIG_ADB_PMU=y
CONFIG_ADB_PMU_EVENT=y
CONFIG_ADB_PMU_LED=y
# CONFIG_ADB_PMU_LED_DISK is not set
CONFIG_PMAC_APM_EMU=m
CONFIG_PMAC_MEDIABAY=y
# CONFIG_PMAC_BACKLIGHT is not set
CONFIG_INPUT_ADBHID=y
CONFIG_MAC_EMUMOUSEBTN=m
CONFIG_THERM_WINDTUNNEL=m
CONFIG_THERM_ADT746X=m
CONFIG_WINDFARM=m
# CONFIG_PMAC_RACKMETER is not set
CONFIG_SENSORS_AMS=m
CONFIG_SENSORS_AMS_PMU=y
CONFIG_SENSORS_AMS_I2C=y
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
CONFIG_WIREGUARD=m
# CONFIG_WIREGUARD_DEBUG is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_GENEVE is not set
# CONFIG_BAREUDP is not set
# CONFIG_GTP is not set
# CONFIG_MACSEC is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_EXTENDED_LOG is not set
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
CONFIG_VIRTIO_NET=y
# CONFIG_NLMON is not set
# CONFIG_NETKIT is not set
CONFIG_SUNGEM_PHY=y
# CONFIG_ARCNET is not set
CONFIG_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_AGERE is not set
# CONFIG_NET_VENDOR_ALACRITECH is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
# CONFIG_NET_VENDOR_AMAZON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_APPLE is not set
# CONFIG_NET_VENDOR_AQUANTIA is not set
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_ASIX is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CADENCE is not set
# CONFIG_NET_VENDOR_CAVIUM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_NET_VENDOR_CORTINA is not set
# CONFIG_NET_VENDOR_DAVICOM is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_ENGLEDER is not set
# CONFIG_NET_VENDOR_EZCHIP is not set
# CONFIG_NET_VENDOR_FUJITSU is not set
# CONFIG_NET_VENDOR_FUNGIBLE is not set
# CONFIG_NET_VENDOR_GOOGLE is not set
# CONFIG_NET_VENDOR_HUAWEI is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_JME is not set
# CONFIG_NET_VENDOR_LITEX is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_MICROSEMI is not set
# CONFIG_NET_VENDOR_MICROSOFT is not set
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NI is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NETERION is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_VENDOR_PACKET_ENGINES is not set
# CONFIG_NET_VENDOR_PENSANDO is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
# CONFIG_NET_VENDOR_BROCADE is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_RDC is not set
# CONFIG_NET_VENDOR_REALTEK is not set
# CONFIG_NET_VENDOR_RENESAS is not set
# CONFIG_NET_VENDOR_ROCKER is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_NET_VENDOR_SOLARFLARE is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_SOCIONEXT is not set
# CONFIG_NET_VENDOR_STMICRO is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
CONFIG_SUNGEM=y
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VERTEXCOM is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WANGXUN is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_NET_VENDOR_XILINX is not set
# CONFIG_NET_VENDOR_XIRCOM is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PHYLIB is not set
# CONFIG_PSE_CONTROLLER is not set
# CONFIG_MDIO_DEVICE is not set
#
# PCS device drivers
#
# end of PCS device drivers
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_USB_NET_DRIVERS is not set
CONFIG_WLAN=y
# CONFIG_WLAN_VENDOR_ADMTEK is not set
# CONFIG_WLAN_VENDOR_ATH is not set
# CONFIG_WLAN_VENDOR_ATMEL is not set
CONFIG_WLAN_VENDOR_BROADCOM=y
# CONFIG_B43 is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not set
# CONFIG_WLAN_VENDOR_INTEL is not set
# CONFIG_WLAN_VENDOR_INTERSIL is not set
# CONFIG_WLAN_VENDOR_MARVELL is not set
# CONFIG_WLAN_VENDOR_MEDIATEK is not set
# CONFIG_WLAN_VENDOR_MICROCHIP is not set
# CONFIG_WLAN_VENDOR_PURELIFI is not set
# CONFIG_WLAN_VENDOR_RALINK is not set
CONFIG_WLAN_VENDOR_REALTEK=y
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_RTL_CARDS is not set
CONFIG_RTL8XXXU=m
# CONFIG_RTL8XXXU_UNTESTED is not set
# CONFIG_RTW88 is not set
# CONFIG_RTW89 is not set
# CONFIG_WLAN_VENDOR_RSI is not set
# CONFIG_WLAN_VENDOR_SILABS is not set
# CONFIG_WLAN_VENDOR_ST is not set
# CONFIG_WLAN_VENDOR_TI is not set
# CONFIG_WLAN_VENDOR_ZYDAS is not set
# CONFIG_WLAN_VENDOR_QUANTENNA is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_VIRT_WIFI is not set
# CONFIG_WAN is not set
#
# Wireless WAN
#
# CONFIG_WWAN is not set
# end of Wireless WAN
# CONFIG_VMXNET3 is not set
# CONFIG_NETDEVSIM is not set
CONFIG_NET_FAILOVER=y
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
CONFIG_INPUT_KUNIT_TEST=m
# CONFIG_INPUT_APMPOWER is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_APPLETOUCH=m
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_AS5011 is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
CONFIG_JOYSTICK_XPAD=m
# CONFIG_JOYSTICK_XPAD_FF is not set
CONFIG_JOYSTICK_XPAD_LEDS=y
# CONFIG_JOYSTICK_PXRC is not set
# CONFIG_JOYSTICK_QWIIC is not set
# CONFIG_JOYSTICK_FSIA6B is not set
# CONFIG_JOYSTICK_SENSEHAT is not set
# CONFIG_JOYSTICK_SEESAW is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_ATMEL_CAPTOUCH is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_DA7280_HAPTICS is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_IQS269A is not set
# CONFIG_INPUT_IQS626A is not set
# CONFIG_INPUT_IQS7222 is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_RMI4_CORE is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_LEGACY_TIOCSTI is not set
CONFIG_LDISC_AUTOLOAD=y
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
# CONFIG_SERIAL_8250_16550A_VARIANTS is not set
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCILIB=y
CONFIG_SERIAL_8250_PCI=y
# CONFIG_SERIAL_8250_EXAR is not set
CONFIG_SERIAL_8250_CS=y
CONFIG_SERIAL_8250_NR_UARTS=8
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_PCI1XXXX is not set
CONFIG_SERIAL_8250_FSL=y
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
# CONFIG_SERIAL_8250_PERICOM is not set
CONFIG_SERIAL_OF_PLATFORM=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_PMACZILOG is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SIFIVE is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
# end of Serial drivers
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_PPC_EPAPR_HV_BYTECHAN is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_N_GSM is not set
# CONFIG_NOZOMI is not set
# CONFIG_NULL_TTY is not set
CONFIG_HVC_DRIVER=y
# CONFIG_HVC_UDBG is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_BA431 is not set
CONFIG_HW_RANDOM_VIRTIO=m
# CONFIG_HW_RANDOM_CCTRNG is not set
# CONFIG_HW_RANDOM_XIPHERA is not set
# CONFIG_APPLICOM is not set
CONFIG_DEVMEM=y
CONFIG_NVRAM=m
CONFIG_DEVPORT=y
# CONFIG_TCG_TPM is not set
# CONFIG_XILLYBUS is not set
# CONFIG_XILLYUSB is not set
# end of Character devices
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=m
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_NVIDIA_GPU is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# Mac SMBus host controller drivers
#
CONFIG_I2C_POWERMAC=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_MPC is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_CP2615 is not set
# CONFIG_I2C_PCI1XXXX is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_VIRTIO is not set
# end of I2C Hardware Bus support
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support
# CONFIG_I3C is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
# CONFIG_PPS is not set
#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support
# CONFIG_PINCTRL is not set
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_APM_POWER=m
# CONFIG_IP5XXX_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_CW2015 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
CONFIG_BATTERY_PMU=m
# CONFIG_BATTERY_SAMSUNG_SDI is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_LTC4162L is not set
# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
# CONFIG_CHARGER_MAX77976 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_BATTERY_GOLDFISH is not set
# CONFIG_BATTERY_RT5033 is not set
# CONFIG_CHARGER_BD99954 is not set
# CONFIG_BATTERY_UG3105 is not set
# CONFIG_FUEL_GAUGE_MM8013 is not set
CONFIG_HWMON=m
CONFIG_HWMON_DEBUG_CHIP=y
#
# Native drivers
#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM1177 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_AHT10 is not set
# CONFIG_SENSORS_AQUACOMPUTER_D5NEXT is not set
# CONFIG_SENSORS_AS370 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ASUS_ROG_RYUJIN is not set
# CONFIG_SENSORS_AXI_FAN_CONTROL is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_CHIPCAP2 is not set
# CONFIG_SENSORS_CORSAIR_CPRO is not set
# CONFIG_SENSORS_CORSAIR_PSU is not set
CONFIG_SENSORS_DRIVETEMP=m
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GIGABYTE_WATERFORCE is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_HS3001 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWERZ is not set
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2947_I2C is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC2991 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_LTC4282 is not set
# CONFIG_SENSORS_MAX127 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX31730 is not set
# CONFIG_SENSORS_MAX31760 is not set
# CONFIG_MAX31827 is not set
# CONFIG_SENSORS_MAX6620 is not set
# CONFIG_SENSORS_MAX6621 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MC34VR500 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_TPS23861 is not set
# CONFIG_SENSORS_MR75203 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_NCT6775_I2C is not set
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NPCM7XX is not set
# CONFIG_SENSORS_NZXT_KRAKEN2 is not set
# CONFIG_SENSORS_NZXT_KRAKEN3 is not set
# CONFIG_SENSORS_NZXT_SMART2 is not set
# CONFIG_SENSORS_OCC_P8_I2C is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_PT5161L is not set
# CONFIG_SENSORS_SBTSI is not set
# CONFIG_SENSORS_SBRMI is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHT4x is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC2305 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA238 is not set
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_TMP464 is not set
# CONFIG_SENSORS_TMP513 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83773G is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_ACT8945A is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_SMPRO is not set
# CONFIG_MFD_AS3722 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_CS42L43_I2C is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_MFD_MAX5970 is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_GATEWORKS_GSC is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_MP2629 is not set
# CONFIG_MFD_HI6421_PMIC is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_IQS62X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77541 is not set
# CONFIG_MFD_MAX77620 is not set
# CONFIG_MFD_MAX77650 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77714 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6370 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_NTXEC is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_SY7636A is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT4831 is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RT5120 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_RK8XX_I2C is not set
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TI_LP87565 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS65219 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS6594_I2C is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_LOCHNAGAR is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_ROHM_BD718XX is not set
# CONFIG_MFD_ROHM_BD71828 is not set
# CONFIG_MFD_ROHM_BD957XMUF is not set
# CONFIG_MFD_STPMIC1 is not set
# CONFIG_MFD_STMFX is not set
# CONFIG_MFD_ATC260X_I2C is not set
# CONFIG_MFD_QCOM_PM8008 is not set
# CONFIG_MFD_RSMU_I2C is not set
# end of Multifunction device drivers
# CONFIG_REGULATOR is not set
# CONFIG_RC_CORE is not set
#
# CEC support
#
# CONFIG_MEDIA_CEC_SUPPORT is not set
# end of CEC support
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_APERTURE_HELPERS=y
CONFIG_VIDEO=y
# CONFIG_AUXDISPLAY is not set
# CONFIG_AGP is not set
CONFIG_DRM=y
# CONFIG_DRM_DEBUG_MM is not set
CONFIG_DRM_KUNIT_TEST_HELPERS=m
CONFIG_DRM_KUNIT_TEST=m
CONFIG_DRM_KMS_HELPER=y
# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set
CONFIG_DRM_DEBUG_MODESET_LOCK=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_DISPLAY_HELPER=m
CONFIG_DRM_DISPLAY_DP_HELPER=y
# CONFIG_DRM_DP_AUX_CHARDEV is not set
# CONFIG_DRM_DP_CEC is not set
CONFIG_DRM_TTM=m
CONFIG_DRM_EXEC=m
CONFIG_DRM_BUDDY=m
CONFIG_DRM_VRAM_HELPER=m
CONFIG_DRM_TTM_HELPER=m
CONFIG_DRM_GEM_SHMEM_HELPER=m
CONFIG_DRM_SUBALLOC_HELPER=m
#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# end of I2C encoder or helper chips
#
# ARM devices
#
# end of ARM devices
CONFIG_DRM_RADEON=m
CONFIG_DRM_RADEON_USERPTR=y
# CONFIG_DRM_AMDGPU is not set
# CONFIG_DRM_NOUVEAU is not set
# CONFIG_DRM_XE is not set
CONFIG_DRM_VGEM=m
# CONFIG_DRM_VKMS is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_QXL is not set
CONFIG_DRM_VIRTIO_GPU=m
CONFIG_DRM_VIRTIO_GPU_KMS=y
CONFIG_DRM_PANEL=y
#
# Display Panels
#
# CONFIG_DRM_PANEL_LVDS is not set
# CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 is not set
# CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6D7AA0 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E63M0 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set
# CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set
# CONFIG_DRM_PANEL_EDP is not set
# CONFIG_DRM_PANEL_SIMPLE is not set
# end of Display Panels
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y
#
# Display Interface Bridges
#
# CONFIG_DRM_CHIPONE_ICN6211 is not set
# CONFIG_DRM_CHRONTEL_CH7033 is not set
# CONFIG_DRM_DISPLAY_CONNECTOR is not set
# CONFIG_DRM_ITE_IT6505 is not set
# CONFIG_DRM_LONTIUM_LT8912B is not set
# CONFIG_DRM_LONTIUM_LT9211 is not set
# CONFIG_DRM_LONTIUM_LT9611 is not set
# CONFIG_DRM_LONTIUM_LT9611UXC is not set
# CONFIG_DRM_ITE_IT66121 is not set
# CONFIG_DRM_LVDS_CODEC is not set
# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set
# CONFIG_DRM_NXP_PTN3460 is not set
# CONFIG_DRM_PARADE_PS8622 is not set
# CONFIG_DRM_PARADE_PS8640 is not set
# CONFIG_DRM_SIL_SII8620 is not set
# CONFIG_DRM_SII902X is not set
# CONFIG_DRM_SII9234 is not set
# CONFIG_DRM_SIMPLE_BRIDGE is not set
# CONFIG_DRM_THINE_THC63LVD1024 is not set
# CONFIG_DRM_TOSHIBA_TC358762 is not set
# CONFIG_DRM_TOSHIBA_TC358764 is not set
# CONFIG_DRM_TOSHIBA_TC358767 is not set
# CONFIG_DRM_TOSHIBA_TC358768 is not set
# CONFIG_DRM_TOSHIBA_TC358775 is not set
# CONFIG_DRM_TI_DLPC3433 is not set
# CONFIG_DRM_TI_TFP410 is not set
# CONFIG_DRM_TI_SN65DSI83 is not set
# CONFIG_DRM_TI_SN65DSI86 is not set
# CONFIG_DRM_TI_TPD12S015 is not set
# CONFIG_DRM_ANALOGIX_ANX6345 is not set
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_ANALOGIX_ANX7625 is not set
# CONFIG_DRM_I2C_ADV7511 is not set
# CONFIG_DRM_CDNS_DSI is not set
# CONFIG_DRM_CDNS_MHDP8546 is not set
# end of Display Interface Bridges
# CONFIG_DRM_ETNAVIV is not set
# CONFIG_DRM_LOGICVC is not set
# CONFIG_DRM_ARCPGU is not set
CONFIG_DRM_BOCHS=m
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_GM12U320 is not set
# CONFIG_DRM_OFDRM is not set
# CONFIG_DRM_SIMPLEDRM is not set
# CONFIG_DRM_GUD is not set
# CONFIG_DRM_SSD130X is not set
CONFIG_DRM_EXPORT_FOR_TESTS=y
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
CONFIG_DRM_LIB_RANDOM=y
#
# Frame buffer Devices
#
CONFIG_FB=y
CONFIG_FB_MACMODES=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_OF=y
# CONFIG_FB_CONTROL is not set
# CONFIG_FB_PLATINUM is not set
# CONFIG_FB_VALKYRIE is not set
CONFIG_FB_CT65550=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SM712 is not set
CONFIG_FB_CORE=y
CONFIG_FB_NOTIFY=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DEVICE is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYSMEM_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_IOMEM_FOPS=y
CONFIG_FB_IOMEM_HELPERS=y
CONFIG_FB_SYSMEM_HELPERS=y
CONFIG_FB_SYSMEM_HELPERS_DEFERRED=y
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=m
# CONFIG_BACKLIGHT_KTD2801 is not set
# CONFIG_BACKLIGHT_KTZ8866 is not set
# CONFIG_BACKLIGHT_QCOM_WLED is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
CONFIG_BACKLIGHT_LED=m
# end of Backlight & LCD device support
CONFIG_HDMI=y
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION is not set
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
# end of Console display driver support
# CONFIG_LOGO is not set
# end of Graphics support
# CONFIG_DRM_ACCEL is not set
CONFIG_SOUND=m
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_SEQ_DEVICE=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_CORE_TEST=m
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
# CONFIG_SND_OSSEMUL is not set
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=6
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_CTL_FAST_LOOKUP is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_CTL_INPUT_VALIDATION=y
CONFIG_SND_VMASTER=y
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_SEQ_MIDI_EVENT=m
CONFIG_SND_SEQ_MIDI=m
CONFIG_SND_SEQ_VIRMIDI=m
# CONFIG_SND_SEQ_UMP is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_DUMMY is not set
CONFIG_SND_ALOOP=m
# CONFIG_SND_PCMTEST is not set
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SE6X is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
#
# HD-Audio
#
CONFIG_SND_HDA=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
# CONFIG_SND_HDA_INPUT_BEEP is not set
# CONFIG_SND_HDA_PATCH_LOADER is not set
# CONFIG_SND_HDA_CIRRUS_SCODEC_KUNIT_TEST is not set
# CONFIG_SND_HDA_CODEC_REALTEK is not set
# CONFIG_SND_HDA_CODEC_ANALOG is not set
# CONFIG_SND_HDA_CODEC_SIGMATEL is not set
# CONFIG_SND_HDA_CODEC_VIA is not set
CONFIG_SND_HDA_CODEC_HDMI=m
# CONFIG_SND_HDA_CODEC_CIRRUS is not set
# CONFIG_SND_HDA_CODEC_CS8409 is not set
# CONFIG_SND_HDA_CODEC_CONEXANT is not set
# CONFIG_SND_HDA_CODEC_CA0110 is not set
# CONFIG_SND_HDA_CODEC_CA0132 is not set
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
# CONFIG_SND_HDA_CODEC_SI3054 is not set
# CONFIG_SND_HDA_GENERIC is not set
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# CONFIG_SND_HDA_INTEL_HDMI_SILENT_STREAM is not set
# CONFIG_SND_HDA_CTL_DEV_ID is not set
# end of HD-Audio
CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_COMPONENT=y
CONFIG_SND_HDA_PREALLOC_SIZE=2048
CONFIG_SND_INTEL_DSP_CONFIG=m
# CONFIG_SND_PPC is not set
CONFIG_SND_AOA=m
CONFIG_SND_AOA_FABRIC_LAYOUT=m
CONFIG_SND_AOA_ONYX=m
CONFIG_SND_AOA_TAS=m
CONFIG_SND_AOA_TOONIE=m
CONFIG_SND_AOA_SOUNDBUS=m
CONFIG_SND_AOA_SOUNDBUS_I2S=m
# CONFIG_SND_USB is not set
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
# CONFIG_SND_DICE is not set
# CONFIG_SND_OXFW is not set
CONFIG_SND_ISIGHT=m
# CONFIG_SND_FIREWORKS is not set
# CONFIG_SND_BEBOB is not set
# CONFIG_SND_FIREWIRE_DIGI00X is not set
# CONFIG_SND_FIREWIRE_TASCAM is not set
# CONFIG_SND_FIREWIRE_MOTU is not set
# CONFIG_SND_FIREFACE is not set
# CONFIG_SND_PCMCIA is not set
# CONFIG_SND_SOC is not set
# CONFIG_SND_VIRTIO is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACCUTOUCH is not set
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=y
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_ASUS is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_BIGBEN_FF is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_MACALLY is not set
# CONFIG_HID_PRODIKEYS is not set
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CREATIVE_SB0540 is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELAN is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
# CONFIG_HID_EVISION is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_FT260 is not set
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_GLORIOUS is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_GOOGLE_STADIA_FF is not set
# CONFIG_HID_VIVALDI is not set
# CONFIG_HID_GT683R is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
CONFIG_HID_UCLOGIC=m
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_VRC2 is not set
# CONFIG_HID_XIAOMI is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_ITE is not set
# CONFIG_HID_JABRA is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LED is not set
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_LETSKETCH is not set
# CONFIG_HID_LOGITECH is not set
CONFIG_HID_MAGICMOUSE=y
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_MEGAWORLD_FF is not set
# CONFIG_HID_REDRAGON is not set
CONFIG_HID_MICROSOFT=m
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
CONFIG_HID_NINTENDO=m
# CONFIG_NINTENDO_FF is not set
# CONFIG_HID_NTI is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_NVIDIA_SHIELD is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PENMOUNT is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PXRC is not set
# CONFIG_HID_RAZER is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_RETRODE is not set
CONFIG_HID_ROCCAT=m
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SEMITEK is not set
# CONFIG_HID_SIGMAMICRO is not set
CONFIG_HID_SONY=m
# CONFIG_SONY_FF is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEAM is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_TOPRE is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_U2FZERO is not set
# CONFIG_HID_WACOM is not set
CONFIG_HID_WIIMOTE=m
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set
# CONFIG_HID_MCP2221 is not set
CONFIG_HID_KUNIT_TEST=m
# end of Special HID drivers
#
# HID-BPF support
#
# end of HID-BPF support
#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
# end of USB HID support
# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
# CONFIG_USB_PCI_AMD is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_FEW_INIT_RETRIES is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_PRODUCTLIST is not set
# CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB is not set
# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_DEFAULT_AUTHORIZATION_MODE=1
CONFIG_USB_MON=m
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_XPS_USB_HCD_XILINX is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=m
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_SSB is not set
# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
CONFIG_USB_UAS=m
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
#
# USB dual-mode controller drivers
#
# CONFIG_USB_CDNS_SUPPORT is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set
#
# USB port drivers
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_SIMPLE is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_F8153X is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MXUPORT is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_XSENS_MT is not set
# CONFIG_USB_SERIAL_WISHBONE is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_QT2 is not set
# CONFIG_USB_SERIAL_UPD78F0730 is not set
# CONFIG_USB_SERIAL_XR is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
CONFIG_USB_APPLEDISPLAY=m
# CONFIG_APPLE_MFI_FASTCHARGE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
CONFIG_USB_ISIGHTFW=m
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HUB_USB251XB is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
# CONFIG_USB_ONBOARD_HUB is not set
#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_ISP1301 is not set
# end of USB Physical Layer drivers
# CONFIG_USB_GADGET is not set
# CONFIG_TYPEC is not set
# CONFIG_USB_ROLE_SWITCH is not set
# CONFIG_MMC is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_CLASS_MULTICOLOR is not set
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
#
# LED drivers
#
# CONFIG_LEDS_AN30259A is not set
# CONFIG_LEDS_AW200XX is not set
# CONFIG_LEDS_AW2013 is not set
# CONFIG_LEDS_BCM6328 is not set
# CONFIG_LEDS_BCM6358 is not set
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3532 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_LM3692X is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP8860 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_PCA995X is not set
# CONFIG_LEDS_BD2606MVV is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_IS31FL319X is not set
# CONFIG_LEDS_IS31FL32XX is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_LM3697 is not set
#
# Flash and Torch LED drivers
#
#
# RGB LED drivers
#
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
CONFIG_LEDS_TRIGGER_DISK=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_LEDS_TRIGGER_CAMERA is not set
CONFIG_LEDS_TRIGGER_PANIC=y
# CONFIG_LEDS_TRIGGER_NETDEV is not set
# CONFIG_LEDS_TRIGGER_PATTERN is not set
# CONFIG_LEDS_TRIGGER_AUDIO is not set
# CONFIG_LEDS_TRIGGER_TTY is not set
#
# Simple LED drivers
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_LIB_KUNIT_TEST=m
CONFIG_RTC_NVMEM=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABEOZ9 is not set
# CONFIG_RTC_DRV_ABX80X is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_HYM8563 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_NCT3018Y is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_ISL12026 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3028 is not set
# CONFIG_RTC_DRV_RV3032 is not set
# CONFIG_RTC_DRV_RV8803 is not set
# CONFIG_RTC_DRV_SD3078 is not set
#
# SPI RTC drivers
#
CONFIG_RTC_I2C_AND_SPI=y
#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
# CONFIG_RTC_DRV_RX6110 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_ZYNQMP is not set
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_GENERIC=y
# CONFIG_RTC_DRV_CADENCE is not set
# CONFIG_RTC_DRV_FTRTC010 is not set
# CONFIG_RTC_DRV_R7301 is not set
#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_GOLDFISH is not set
# CONFIG_DMADEVICES is not set
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
CONFIG_UDMABUF=y
# CONFIG_DMABUF_MOVE_NOTIFY is not set
CONFIG_DMABUF_DEBUG=y
CONFIG_DMABUF_SELFTESTS=m
CONFIG_DMABUF_HEAPS=y
# CONFIG_DMABUF_SYSFS_STATS is not set
CONFIG_DMABUF_HEAPS_SYSTEM=y
# end of DMABUF options
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_PCI_LIB=y
CONFIG_VIRTIO_PCI_LIB_LEGACY=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VIRTIO_INPUT is not set
# CONFIG_VIRTIO_MMIO is not set
CONFIG_VIRTIO_DMA_SHARED_BUFFER=m
# CONFIG_VDPA is not set
CONFIG_VHOST_IOTLB=m
CONFIG_VHOST_TASK=y
CONFIG_VHOST=m
CONFIG_VHOST_MENU=y
CONFIG_VHOST_NET=m
# CONFIG_VHOST_VSOCK is not set
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support
# CONFIG_GREYBUS is not set
# CONFIG_COMEDI is not set
# CONFIG_STAGING is not set
# CONFIG_GOLDFISH is not set
# CONFIG_COMMON_CLK is not set
# CONFIG_HWSPINLOCK is not set
#
# Clock Source drivers
#
# end of Clock Source drivers
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
# end of Generic IOMMU Pagetable Support
# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMUFD is not set
#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers
#
# Rpmsg drivers
#
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers
# CONFIG_SOUNDWIRE is not set
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers
#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# CONFIG_QUICC_ENGINE is not set
# end of NXP/Freescale QorIQ SoC drivers
#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers
#
# i.MX SoC drivers
#
# end of i.MX SoC drivers
#
# Enable LiteX SoC Builder specific drivers
#
# CONFIG_LITEX_SOC_CONTROLLER is not set
# end of Enable LiteX SoC Builder specific drivers
# CONFIG_WPCM450_SOC is not set
#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers
# CONFIG_SOC_TI is not set
#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
#
# PM Domains
#
#
# Amlogic PM Domains
#
# end of Amlogic PM Domains
#
# Broadcom PM Domains
#
# end of Broadcom PM Domains
#
# i.MX PM Domains
#
# end of i.MX PM Domains
#
# Qualcomm PM Domains
#
# end of Qualcomm PM Domains
# end of PM Domains
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_PWM is not set
#
# IRQ chip support
#
CONFIG_IRQCHIP=y
# CONFIG_AL_FIC is not set
# CONFIG_XILINX_INTC is not set
# end of IRQ chip support
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_PHY_CAN_TRANSCEIVER is not set
#
# PHY drivers for Broadcom platforms
#
# CONFIG_BCM_KONA_USB2_PHY is not set
# end of PHY drivers for Broadcom platforms
# CONFIG_PHY_CADENCE_DPHY is not set
# CONFIG_PHY_CADENCE_DPHY_RX is not set
# CONFIG_PHY_CADENCE_SALVO is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# end of PHY Subsystem
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
#
# Performance monitor support
#
# CONFIG_DWC_PCIE_PMU is not set
# end of Performance monitor support
# CONFIG_RAS is not set
# CONFIG_USB4 is not set
#
# Android
#
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android
# CONFIG_DAX is not set
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
CONFIG_NVMEM_LAYOUTS=y
#
# Layout Types
#
# CONFIG_NVMEM_LAYOUT_SL28_VPD is not set
# CONFIG_NVMEM_LAYOUT_ONIE_TLV is not set
# end of Layout Types
# CONFIG_NVMEM_RMEM is not set
#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# end of HW tracing support
# CONFIG_FPGA is not set
# CONFIG_FSI is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# CONFIG_MOST is not set
# CONFIG_PECI is not set
# CONFIG_HTE is not set
# end of Device Drivers
#
# File systems
#
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
CONFIG_FS_STACK=y
CONFIG_BUFFER_HEAD=y
CONFIG_LEGACY_DIRECT_IO=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_EXT4_KUNIT_TESTS=m
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_SUPPORT_V4 is not set
# CONFIG_XFS_SUPPORT_ASCII_CI is not set
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_ONLINE_SCRUB is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_FS_REF_VERIFY is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
CONFIG_BCACHEFS_FS=m
# CONFIG_BCACHEFS_QUOTA is not set
# CONFIG_BCACHEFS_ERASURE_CODING is not set
CONFIG_BCACHEFS_POSIX_ACL=y
# CONFIG_BCACHEFS_DEBUG is not set
CONFIG_BCACHEFS_TESTS=y
# CONFIG_BCACHEFS_LOCK_TIME_STATS is not set
# CONFIG_BCACHEFS_NO_LATENCY_ACCT is not set
CONFIG_BCACHEFS_SIX_OPTIMISTIC_SPIN=y
CONFIG_MEAN_AND_VARIANCE_UNIT_TEST=m
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=m
# CONFIG_CUSE is not set
CONFIG_VIRTIO_FS=m
CONFIG_FUSE_PASSTHROUGH=y
# CONFIG_OVERLAY_FS is not set
#
# Caches
#
CONFIG_NETFS_SUPPORT=y
# CONFIG_NETFS_STATS is not set
# CONFIG_FSCACHE is not set
# end of Caches
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
CONFIG_FAT_DEFAULT_UTF8=y
CONFIG_FAT_KUNIT_TEST=m
CONFIG_EXFAT_FS=m
CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8"
CONFIG_NTFS3_FS=m
CONFIG_NTFS3_LZX_XPRESS=y
# CONFIG_NTFS3_FS_POSIX_ACL is not set
# CONFIG_NTFS_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_TMPFS_QUOTA is not set
CONFIG_CONFIGFS_FS=m
# end of Pseudo filesystems
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
# CONFIG_ECRYPT_FS is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
CONFIG_BEFS_DEBUG=y
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EROFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
# CONFIG_NFS_V2 is not set
# CONFIG_NFS_V3 is not set
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_FLEXFILE_LAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
CONFIG_NFS_V4_SECURITY_LABEL=y
# CONFIG_NFS_FSCACHE is not set
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFS_DISABLE_UDP_SUPPORT=y
# CONFIG_NFS_V4_2_READ_PLUS is not set
# CONFIG_NFSD is not set
CONFIG_GRACE_PERIOD=m
CONFIG_LOCKD=m
CONFIG_NFS_COMMON=y
CONFIG_NFS_V4_2_SSC_HELPER=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_BACKCHANNEL=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
CONFIG_SUNRPC_DEBUG=y
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
# CONFIG_CIFS_UPCALL is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_SWN_UPCALL=y
# CONFIG_SMB_SERVER is not set
CONFIG_SMBFS=m
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=y
CONFIG_9P_FS_POSIX_ACL=y
# CONFIG_9P_FS_SECURITY is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=m
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_MAC_ROMAN=m
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
CONFIG_NLS_UCS2_UTILS=m
# CONFIG_DLM is not set
CONFIG_UNICODE=m
# CONFIG_UNICODE_NORMALIZATION_SELFTEST is not set
CONFIG_IO_WQ=y
# end of File systems
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_REQUEST_CACHE=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_TRUSTED_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
CONFIG_KEY_DH_OPERATIONS=y
CONFIG_KEY_NOTIFICATIONS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_PATH is not set
CONFIG_HARDENED_USERCOPY=y
CONFIG_FORTIFY_SOURCE=y
# CONFIG_STATIC_USERMODEHELPER is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_LOADPIN is not set
CONFIG_SECURITY_YAMA=y
# CONFIG_SECURITY_SAFESETID is not set
# CONFIG_SECURITY_LOCKDOWN_LSM is not set
# CONFIG_SECURITY_LANDLOCK is not set
# CONFIG_INTEGRITY is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
# CONFIG_INIT_STACK_NONE is not set
CONFIG_INIT_STACK_ALL_PATTERN=y
# CONFIG_INIT_STACK_ALL_ZERO is not set
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
# CONFIG_ZERO_CALL_USED_REGS is not set
# end of Memory initialization
#
# Hardening of kernel data structures
#
CONFIG_LIST_HARDENED=y
CONFIG_BUG_ON_DATA_CORRUPTION=y
# end of Hardening of kernel data structures
CONFIG_RANDSTRUCT_NONE=y
# CONFIG_RANDSTRUCT_FULL is not set
# CONFIG_RANDSTRUCT_PERFORMANCE is not set
# end of Kernel hardening options
# end of Security options
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SIG2=y
CONFIG_CRYPTO_SKCIPHER=m
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=m
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
# CONFIG_CRYPTO_MANAGER_EXTRA_TESTS is not set
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_NULL2=m
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_ENGINE=m
# end of Crypto core or helper
#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
# CONFIG_CRYPTO_DH_RFC7919_GROUPS is not set
CONFIG_CRYPTO_ECC=m
CONFIG_CRYPTO_ECDH=m
# CONFIG_CRYPTO_ECDSA is not set
# CONFIG_CRYPTO_ECRDSA is not set
# CONFIG_CRYPTO_SM2 is not set
# CONFIG_CRYPTO_CURVE25519 is not set
# end of Public-key cryptography
#
# Block ciphers
#
CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_AES_TI is not set
# CONFIG_CRYPTO_ARIA is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SM4_GENERIC is not set
# CONFIG_CRYPTO_TWOFISH is not set
# end of Block ciphers
#
# Length-preserving ciphers and modes
#
CONFIG_CRYPTO_ADIANTUM=m
CONFIG_CRYPTO_CHACHA20=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_HCTR2 is not set
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_NHPOLY1305=m
# end of Length-preserving ciphers and modes
#
# AEAD (authenticated encryption with associated data) ciphers
#
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_GENIV=m
CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_ECHAINIV=m
CONFIG_CRYPTO_ESSIV=m
# end of AEAD (authenticated encryption with associated data) ciphers
#
# Hashes, digests, and MACs
#
CONFIG_CRYPTO_BLAKE2B=y
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_POLY1305=m
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_SHA3=m
# CONFIG_CRYPTO_SM3_GENERIC is not set
# CONFIG_CRYPTO_STREEBOG is not set
# CONFIG_CRYPTO_VMAC is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_XXHASH=y
# end of Hashes, digests, and MACs
#
# CRCs (cyclic redundancy checks)
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRCT10DIF is not set
# CONFIG_CRYPTO_CRC64_ROCKSOFT is not set
# end of CRCs (cyclic redundancy checks)
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
CONFIG_CRYPTO_LZ4=m
# CONFIG_CRYPTO_LZ4HC is not set
CONFIG_CRYPTO_ZSTD=m
# end of Compression
#
# Random number generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DRBG_MENU=m
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=m
CONFIG_CRYPTO_JITTERENTROPY=m
CONFIG_CRYPTO_JITTERENTROPY_MEMORY_BLOCKS=64
CONFIG_CRYPTO_JITTERENTROPY_MEMORY_BLOCKSIZE=32
CONFIG_CRYPTO_JITTERENTROPY_OSR=1
CONFIG_CRYPTO_KDF800108_CTR=y
# end of Random number generation
#
# Userspace interface
#
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_USER_API_RNG=m
# CONFIG_CRYPTO_USER_API_RNG_CAVP is not set
CONFIG_CRYPTO_USER_API_AEAD=m
# CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE is not set
# CONFIG_CRYPTO_STATS is not set
# end of Userspace interface
CONFIG_CRYPTO_HASH_INFO=y
#
# Accelerated Cryptographic Algorithms for CPU (powerpc)
#
CONFIG_CRYPTO_MD5_PPC=m
CONFIG_CRYPTO_SHA1_PPC=m
# end of Accelerated Cryptographic Algorithms for CPU (powerpc)
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
CONFIG_CRYPTO_DEV_VIRTIO=m
# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
# CONFIG_CRYPTO_DEV_CCREE is not set
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set
# CONFIG_FIPS_SIGNATURE_SELFTEST is not set
#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
# end of Certificates for signature checking
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_RAID6_PQ_BENCHMARK=y
CONFIG_LINEAR_RANGES=m
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
# CONFIG_CORDIC is not set
CONFIG_PRIME_NUMBERS=m
#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LIB_AES=m
CONFIG_CRYPTO_LIB_ARC4=m
CONFIG_CRYPTO_LIB_GF128MUL=m
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=m
CONFIG_CRYPTO_LIB_CHACHA=m
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=m
CONFIG_CRYPTO_LIB_CURVE25519=m
CONFIG_CRYPTO_LIB_DES=m
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=m
CONFIG_CRYPTO_LIB_POLY1305=m
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=m
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC64_ROCKSOFT is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=m
# CONFIG_CRC4 is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=m
CONFIG_LZ4HC_COMPRESS=m
CONFIG_LZ4_DECOMPRESS=m
CONFIG_ZSTD_COMMON=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
# CONFIG_XZ_DEC is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC16=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_CLOSURES=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_ARCH_DMA_DEFAULT_COHERENT=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
# CONFIG_FORCE_NR_CPUS is not set
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_CLZ_TAB=y
# CONFIG_IRQ_POLL is not set
CONFIG_MPILIB=y
CONFIG_DIMLIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_FONT_SUN8x16=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_STACKDEPOT_MAX_FRAMES=64
CONFIG_SBITMAP=y
# CONFIG_LWQ_TEST is not set
# end of Library routines
CONFIG_GENERIC_IOREMAP=y
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DYNAMIC_DEBUG_CORE is not set
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_MISC is not set
#
# Compile-time checks and compiler options
#
CONFIG_AS_HAS_NON_CONST_ULEB128=y
CONFIG_DEBUG_INFO_NONE=y
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_DWARF5 is not set
CONFIG_FRAME_WARN=1024
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B is not set
# CONFIG_VMLINUX_MAP is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN=y
# CONFIG_UBSAN is not set
CONFIG_HAVE_ARCH_KCSAN=y
CONFIG_HAVE_KCSAN_COMPILER=y
# CONFIG_KCSAN is not set
# end of Generic Kernel Debugging Instruments
#
# Networking Debugging
#
# CONFIG_NET_DEV_REFCNT_TRACKER is not set
# CONFIG_NET_NS_REFCNT_TRACKER is not set
# CONFIG_DEBUG_NET is not set
# end of Networking Debugging
#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_DEBUG_PAGEALLOC=y
# CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT is not set
CONFIG_SLUB_DEBUG=y
# CONFIG_SLUB_DEBUG_ON is not set
CONFIG_PAGE_OWNER=y
CONFIG_PAGE_POISONING=y
CONFIG_DEBUG_RODATA_TEST=y
CONFIG_ARCH_HAS_DEBUG_WX=y
CONFIG_DEBUG_WX=y
CONFIG_GENERIC_PTDUMP=y
CONFIG_PTDUMP_CORE=y
# CONFIG_PTDUMP_DEBUGFS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SHRINKER_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_VM_PGTABLE=y
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_DEBUG_KMAP_LOCAL is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# CONFIG_KASAN is not set
CONFIG_HAVE_ARCH_KFENCE=y
CONFIG_KFENCE=y
CONFIG_KFENCE_SAMPLE_INTERVAL=100
CONFIG_KFENCE_NUM_OBJECTS=255
CONFIG_KFENCE_DEFERRABLE=y
# CONFIG_KFENCE_STATIC_KEYS is not set
CONFIG_KFENCE_STRESS_TEST_FAULTS=0
# end of Memory Debugging
CONFIG_DEBUG_SHIRQ=y
#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_HAVE_HARDLOCKUP_DETECTOR_BUDDY=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_HARDLOCKUP_DETECTOR_PERF is not set
CONFIG_HARDLOCKUP_DETECTOR_BUDDY=y
# CONFIG_HARDLOCKUP_DETECTOR_ARCH is not set
CONFIG_HARDLOCKUP_DETECTOR_COUNTS_HRTIMER=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=60
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_WQ_WATCHDOG=y
# CONFIG_WQ_CPU_INTENSIVE_REPORT is not set
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHED_INFO=y
# CONFIG_SCHEDSTATS is not set
# end of Scheduler Debugging
# CONFIG_DEBUG_TIMEKEEPING is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
CONFIG_DEBUG_RWSEMS=y
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)
CONFIG_DEBUG_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PLIST is not set
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_DEBUG_CLOSURES=y
CONFIG_DEBUG_MAPLE_TREE=y
# end of Debug kernel data structures
#
# RCU Debugging
#
# CONFIG_RCU_SCALE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_REF_SCALE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
CONFIG_RCU_CPU_STALL_CPUTIME=y
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_OBJTOOL_MCOUNT=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
CONFIG_IO_STRICT_DEVMEM=y
#
# powerpc Debugging
#
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_JUMP_LABEL_FEATURE_CHECKS is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
# CONFIG_BDI_SWITCH is not set
CONFIG_BOOTX_TEXT=y
# CONFIG_PPC_EARLY_DEBUG is not set
# end of powerpc Debugging
#
# Kernel Testing and Coverage
#
CONFIG_KUNIT=m
CONFIG_KUNIT_DEBUGFS=y
CONFIG_KUNIT_TEST=m
# CONFIG_KUNIT_EXAMPLE_TEST is not set
# CONFIG_KUNIT_ALL_TESTS is not set
CONFIG_KUNIT_DEFAULT_ENABLED=y
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
CONFIG_RUNTIME_TESTING_MENU=y
# CONFIG_TEST_DHRY is not set
# CONFIG_LKDTM is not set
CONFIG_CPUMASK_KUNIT_TEST=m
CONFIG_TEST_LIST_SORT=m
CONFIG_TEST_MIN_HEAP=m
CONFIG_TEST_SORT=m
CONFIG_TEST_DIV64=m
CONFIG_TEST_IOV_ITER=m
CONFIG_BACKTRACE_SELF_TEST=m
# CONFIG_TEST_REF_TRACKER is not set
CONFIG_RBTREE_TEST=m
CONFIG_REED_SOLOMON_TEST=m
CONFIG_INTERVAL_TREE_TEST=m
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_ASYNC_RAID6_TEST=m
# CONFIG_TEST_HEXDUMP is not set
CONFIG_STRING_KUNIT_TEST=m
CONFIG_STRING_HELPERS_KUNIT_TEST=m
CONFIG_TEST_KSTRTOX=y
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_SCANF is not set
# CONFIG_TEST_BITMAP is not set
CONFIG_TEST_UUID=m
CONFIG_TEST_XARRAY=m
CONFIG_TEST_MAPLE_TREE=m
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_IDA is not set
# CONFIG_TEST_LKM is not set
CONFIG_TEST_BITOPS=m
CONFIG_TEST_VMALLOC=m
CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
# CONFIG_TEST_BLACKHOLE_DEV is not set
CONFIG_FIND_BIT_BENCHMARK=m
# CONFIG_TEST_FIRMWARE is not set
CONFIG_TEST_SYSCTL=m
CONFIG_BITFIELD_KUNIT=m
CONFIG_CHECKSUM_KUNIT=m
CONFIG_HASH_KUNIT_TEST=m
CONFIG_RESOURCE_KUNIT_TEST=m
CONFIG_SYSCTL_KUNIT_TEST=m
CONFIG_LIST_KUNIT_TEST=m
CONFIG_HASHTABLE_KUNIT_TEST=m
CONFIG_LINEAR_RANGES_TEST=m
CONFIG_CMDLINE_KUNIT_TEST=m
CONFIG_BITS_TEST=m
CONFIG_SLUB_KUNIT_TEST=m
CONFIG_MEMCPY_KUNIT_TEST=m
CONFIG_IS_SIGNED_TYPE_KUNIT_TEST=m
CONFIG_OVERFLOW_KUNIT_TEST=m
CONFIG_STACKINIT_KUNIT_TEST=m
CONFIG_FORTIFY_KUNIT_TEST=m
CONFIG_STRCAT_KUNIT_TEST=m
CONFIG_STRSCPY_KUNIT_TEST=m
CONFIG_SIPHASH_KUNIT_TEST=m
# CONFIG_TEST_UDELAY is not set
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_TEST_KMOD is not set
CONFIG_TEST_MEMCAT_P=m
CONFIG_TEST_MEMINIT=m
CONFIG_TEST_FREE_PAGES=m
CONFIG_TEST_OBJPOOL=m
CONFIG_ARCH_USE_MEMTEST=y
# CONFIG_MEMTEST is not set
# end of Kernel Testing and Coverage
#
# Rust hacking
#
# end of Rust hacking
# end of Kernel hacking
#
# Gentoo Linux
#
CONFIG_GENTOO_LINUX=y
CONFIG_GENTOO_LINUX_UDEV=y
CONFIG_GENTOO_LINUX_PORTAGE=y
#
# Support for init systems, system and service managers
#
CONFIG_GENTOO_LINUX_INIT_SCRIPT=y
CONFIG_GENTOO_LINUX_INIT_SYSTEMD=y
# end of Support for init systems, system and service managers
# CONFIG_GENTOO_KERNEL_SELF_PROTECTION is not set
CONFIG_GENTOO_PRINT_FIRMWARE_INFO=y
# end of Gentoo Linux
[-- Attachment #3: dmesg_690_g4 --]
[-- Type: application/octet-stream, Size: 58446 bytes --]
[ 0.000000] Total memory = 2048MB; using 4096kB for hash table
[ 0.000000] Activating Kernel Userspace Access Protection
[ 0.000000] Activating Kernel Userspace Execution Prevention
[ 0.000000] Linux version 6.9.0-gentoo-PMacG4 (root@T1000) (gcc (Gentoo 13.2.1_p20240210 p14) 13.2.1 20240210, GNU ld (Gentoo 2.42 p3) 2.42.0) #1 SMP Wed May 15 21:20:31 CEST 2024
[ 0.000000] ioremap() called early from pmac_feature_init+0x208/0x1008. Use early_ioremap() instead
[ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0x24
[ 0.000000] Mapped at 0xff3bf000
[ 0.000000] ioremap() called early from probe_one_macio+0x214/0x374. Use early_ioremap() instead
[ 0.000000] Found a Keylargo mac-io controller, rev: 3, mapped at 0x(ptrval)
[ 0.000000] PowerMac motherboard: PowerMac G4 Windtunnel
[ 0.000000] ioremap() called early from btext_map+0x5c/0x7c. Use early_ioremap() instead
[ 0.000000] Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
[ 0.000000] printk: legacy bootconsole [udbg0] enabled
[ 0.000000] CPU maps initialized for 1 thread per core
[ 0.000000] (thread shift is 0)
[ 0.000000] -----------------------------------------------------
[ 0.000000] phys_mem_size = 0x80000000
[ 0.000000] dcache_bsize = 0x20
[ 0.000000] icache_bsize = 0x20
[ 0.000000] cpu_features = 0x000000002514600a
[ 0.000000] possible = 0x00000000277de00a
[ 0.000000] always = 0x0000000001000000
[ 0.000000] cpu_user_features = 0x9c000001 0x00000000
[ 0.000000] mmu_features = 0x00010201
[ 0.000000] Hash_size = 0x400000
[ 0.000000] Hash_mask = 0xffff
[ 0.000000] -----------------------------------------------------
[ 0.000000] ioremap() called early from pmac_setup_arch+0xfc/0x3c0. Use early_ioremap() instead
[ 0.000000] ioremap() called early from find_via_pmu+0x338/0x3c4. Use early_ioremap() instead
[ 0.000000] ioremap() called early from find_via_pmu+0x158/0x3c4. Use early_ioremap() instead
[ 0.000000] via-pmu: Server Mode is disabled
[ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c
[ 0.000000] ioremap() called early from pmac_nvram_init+0x208/0x6c4. Use early_ioremap() instead
[ 0.000000] nvram: Checking bank 0...
[ 0.000000] nvram: gen0=3419, gen1=3420
[ 0.000000] nvram: Active bank is: 1
[ 0.000000] nvram: OF partition at 0x410
[ 0.000000] nvram: XP partition at 0x1020
[ 0.000000] nvram: NR partition at 0x1120
[ 0.000000] Top of RAM: 0x80000000, Total RAM: 0x80000000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
[ 0.000000] Normal empty
[ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] percpu: Embedded 29 pages/cpu s28448 r8192 d82144 u118784
[ 0.000000] pcpu-alloc: s28448 r8192 d82144 u118784 alloc=29*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Kernel command line: ro root=/dev/sda5 slub_debug=FZP page_poison=1 netconsole=6666@192.168.2.8/eth0,6666@192.168.2.3/A8:A1:59:16:4F:EA debug
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560
[ 0.000000] mem auto-init: stack:all(pattern), heap alloc:off, heap free:off
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xffbbf000..0xfffff000 : fixmap
[ 0.000000] * 0xff400000..0xff800000 : highmem PTEs
[ 0.000000] * 0xff115000..0xff400000 : early ioremap
[ 0.000000] * 0xf1000000..0xff115000 : vmalloc & ioremap
[ 0.000000] * 0xb0000000..0xc0000000 : modules
[ 0.000000] Memory: 2056004K/2097152K available (7908K kernel code, 540K rwdata, 4380K rodata, 1360K init, 284K bss, 41148K reserved, 0K cma-reserved, 1310720K highmem)
[ 0.000000] **********************************************************
[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.000000] ** **
[ 0.000000] ** This system shows unhashed kernel memory addresses **
[ 0.000000] ** via the console, logs, and other interfaces. This **
[ 0.000000] ** might reduce the security of your system. **
[ 0.000000] ** **
[ 0.000000] ** If you see this message and you are not debugging **
[ 0.000000] ** the kernel, report this immediately to your system **
[ 0.000000] ** administrator! **
[ 0.000000] ** **
[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.000000] **********************************************************
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
[ 0.000000] mpic: Resetting
[ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 2 CPUs
[ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f
[ 0.000000] mpic: Initializing for 64 sources
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] time_init: decrementer frequency = 41.658765 MHz
[ 0.000000] time_init: processor frequency = 1416.666661 MHz
[ 0.000005] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x99b97f1da, max_idle_ns: 440795202966 ns
[ 0.000556] clocksource: timebase mult[18012a56] shift[24] registered
[ 0.001052] clockevent: decrementer mult[aaa2619] shift[32] cpu[0]
[ 0.001786] kfence: initialized - using 2097152 bytes for 255 objects at 0xeeae1000-0xeece1000
[ 0.003077] Console: colour dummy device 80x25
[ 0.003544] printk: legacy console [tty0] enabled
[ 0.004005] printk: legacy bootconsole [udbg0] disabled
[ 0.004557] pid_max: default: 32768 minimum: 301
[ 0.007262] LSM: initializing lsm=capability,yama
[ 0.007303] Yama: becoming mindful.
[ 0.008130] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.008184] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.014929] PowerMac SMP probe found 2 cpus
[ 0.015541] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
[ 0.015741] channel 0 bus <multibus>
[ 0.015761] channel 1 bus <multibus>
[ 0.015878] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
[ 0.015919] channel 0 bus <multibus>
[ 0.015977] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c
[ 0.016161] channel 1 bus <multibus>
[ 0.016180] channel 2 bus <multibus>
[ 0.016234] pmf: no parser for command 17 !
[ 0.016310] Processor timebase sync using GPIO 0x73
[ 0.016325] mpic: requesting IPIs...
[ 0.016429] CPU0: L2CR is 80000000
[ 0.016443] CPU0: L3CR is 9c030000
[ 0.018352] MPC7450 family performance monitor hardware support registered
[ 0.018612] rcu: Hierarchical SRCU implementation.
[ 0.018636] rcu: Max phase no-delay instances is 1000.
[ 0.019639] smp: Bringing up secondary CPUs ...
[83973668.427957] CPU1: L2CR was 0
[83973668.428017] CPU1: L2CR set to 80000000
[83973668.428024] CPU1: L3CR was 0
[83973668.428170] CPU1: L3CR set to 9c030000
[ 0.022978] smp: Brought up 1 node, 2 CPUs
[ 0.025770] devtmpfs: initialized
[ 0.026686] Duplicate name in PowerPC,G4@0, renamed to "l2-cache#1"
[ 0.026824] Duplicate name in l2-cache#1, renamed to "l2-cache#1"
[ 0.027297] Duplicate name in PowerPC,G4@1, renamed to "l2-cache#1"
[ 0.027463] Duplicate name in l2-cache#1, renamed to "l2-cache#1"
[ 0.033475] Duplicate name in gpio@50, renamed to "gpio5@6f#1"
[ 0.033586] Duplicate name in gpio@50, renamed to "gpio6@70#1"
[ 0.033816] Duplicate name in gpio@50, renamed to "gpio11@75#1"
[ 0.033951] Duplicate name in gpio@50, renamed to "extint-gpio15@67#1"
[ 0.041562] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0
[ 0.041611] PCI host bridge /pci@f0000000 ranges:
[ 0.041650] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000
[ 0.041681] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
[ 0.041817] MEM 0x0000000090000000..0x00000000afffffff -> 0x0000000090000000
[ 0.041880] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0
[ 0.041905] PCI host bridge /pci@f2000000 (primary) ranges:
[ 0.041937] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000
[ 0.041966] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000
[ 0.042087] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000
[ 0.042153] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0
[ 0.042176] PCI host bridge /pci@f4000000 ranges:
[ 0.042206] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000
[ 0.042231] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000
[ 0.042486] Found NEC PD720100A USB2 chip with disabled EHCI, fixing up...
[ 0.043015] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.043113] futex hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.046634] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.053255] PCI: Probing PCI hardware
[ 0.054127] PCI host bridge to bus 0000:00
[ 0.054162] pci_bus 0000:00: root bus resource [io 0xff780000-0xfff7ffff] (bus address [0x0000-0x7fffff])
[ 0.054192] pci_bus 0000:00: root bus resource [mem 0xf1000000-0xf1ffffff]
[ 0.054213] pci_bus 0000:00: root bus resource [mem 0x90000000-0xafffffff]
[ 0.054239] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.054260] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.054913] pci 0000:00:0b.0: [106b:0034] type 00 class 0x060000 conventional PCI endpoint
[ 0.055556] pci 0000:00:10.0: [1002:4150] type 00 class 0x030000 conventional PCI endpoint
[ 0.055603] pci 0000:00:10.0: BAR 0 [mem 0xa0000000-0xafffffff pref]
[ 0.055629] pci 0000:00:10.0: BAR 1 [io 0xff780400-0xff7804ff]
[ 0.055653] pci 0000:00:10.0: BAR 2 [mem 0x90000000-0x9000ffff]
[ 0.055738] pci 0000:00:10.0: ROM [mem 0x90020000-0x9003ffff pref]
[ 0.055800] pci 0000:00:10.0: supports D1 D2
[ 0.056655] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.057342] OF: /pci@f2000000/mac-io@17/gpio@50/gpio5@6f: could not find phandle 1751474532
[ 0.057418] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio15@67: could not find phandle 1751474532
[ 0.057496] OF: /pci@f2000000/mac-io@17/gpio@50/gpio6@70: could not find phandle 1634562093
[ 0.057568] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio16@68: could not find phandle 1936745825
[ 0.057649] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio14@66: could not find phandle 1818848869
[ 0.057727] OF: /pci@f2000000/mac-io@17/gpio@50/gpio12@76: could not find phandle 1835103092
[ 0.057797] OF: /pci@f2000000/mac-io@17/gpio@50/gpio11@75: could not find phandle 1635083369
[ 0.057860] OF: /pci@f2000000/mac-io@17/gpio@50/gpio5@6f: could not find phandle 1751474532
[ 0.057924] OF: /pci@f2000000/mac-io@17/gpio@50/gpio6@70: could not find phandle 1634562093
[ 0.057987] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio4@5c: could not find phandle 1818848869
[ 0.058065] OF: /pci@f2000000/mac-io@17/gpio@50/gpio11@75: could not find phandle 1635083369
[ 0.058129] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio15@67: could not find phandle 1751474532
[ 0.059472] pci_bus 0001:00: Fixed dependency cycle(s) with /pci@f2000000/mac-io@17/interrupt-controller@40000
[ 0.059590] PCI host bridge to bus 0001:00
[ 0.059609] pci_bus 0001:00: root bus resource [io 0x0000-0x7fffff]
[ 0.059631] pci_bus 0001:00: root bus resource [mem 0xf3000000-0xf3ffffff]
[ 0.059653] pci_bus 0001:00: root bus resource [mem 0x80000000-0x8fffffff]
[ 0.059676] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.059696] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.060167] pci 0001:00:0b.0: [106b:0035] type 00 class 0x060000 conventional PCI endpoint
[ 0.060767] pci 0001:00:12.0: [1033:0035] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.060811] pci 0001:00:12.0: BAR 0 [mem 0x8008c000-0x8008cfff]
[ 0.060892] pci 0001:00:12.0: supports D1 D2
[ 0.060909] pci 0001:00:12.0: PME# supported from D0 D1 D2 D3hot
[ 0.061247] pci 0001:00:12.1: [1033:0035] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.061288] pci 0001:00:12.1: BAR 0 [mem 0x8008b000-0x8008bfff]
[ 0.061366] pci 0001:00:12.1: supports D1 D2
[ 0.061383] pci 0001:00:12.1: PME# supported from D0 D1 D2 D3hot
[ 0.061837] pci 0001:00:12.2: [1033:00e0] type 00 class 0x0c0320 conventional PCI endpoint
[ 0.061879] pci 0001:00:12.2: BAR 0 [mem 0x80081000-0x800810ff]
[ 0.061959] pci 0001:00:12.2: supports D1 D2
[ 0.061976] pci 0001:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.062315] pci 0001:00:13.0: [1095:3112] type 00 class 0x018000 conventional PCI endpoint
[ 0.062356] pci 0001:00:13.0: BAR 0 [io 0x0460-0x0467]
[ 0.062378] pci 0001:00:13.0: BAR 1 [io 0x0450-0x0453]
[ 0.062423] pci 0001:00:13.0: BAR 2 [io 0x0440-0x0447]
[ 0.062448] pci 0001:00:13.0: BAR 3 [io 0x0430-0x0433]
[ 0.062470] pci 0001:00:13.0: BAR 4 [io 0x0420-0x042f]
[ 0.062493] pci 0001:00:13.0: BAR 5 [mem 0x80082000-0x800821ff]
[ 0.062516] pci 0001:00:13.0: ROM [mem 0x80100000-0x8017ffff pref]
[ 0.062567] pci 0001:00:13.0: supports D1 D2
[ 0.062960] pci 0001:00:15.0: [9710:9865] type 00 class 0x070002 conventional PCI endpoint
[ 0.063003] pci 0001:00:15.0: BAR 0 [io 0x0410-0x0417]
[ 0.063026] pci 0001:00:15.0: BAR 1 [mem 0x8008a000-0x8008afff]
[ 0.063059] pci 0001:00:15.0: BAR 4 [mem 0x80089000-0x80089fff]
[ 0.063122] pci 0001:00:15.0: supports D1 D2
[ 0.063139] pci 0001:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.063478] pci 0001:00:15.1: [9710:9865] type 00 class 0x070002 conventional PCI endpoint
[ 0.063519] pci 0001:00:15.1: BAR 0 [io 0x0400-0x0407]
[ 0.063542] pci 0001:00:15.1: BAR 1 [mem 0x80088000-0x80088fff]
[ 0.063575] pci 0001:00:15.1: BAR 4 [mem 0x80087000-0x80087fff]
[ 0.063637] pci 0001:00:15.1: supports D1 D2
[ 0.063654] pci 0001:00:15.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.064037] pci 0001:00:15.2: [ffff:9865] type 00 class 0x070103 conventional PCI endpoint
[ 0.064078] pci 0001:00:15.2: BAR 0 [io 0x0000-0x0007]
[ 0.064101] pci 0001:00:15.2: BAR 1 [io 0x0000-0x0007]
[ 0.064124] pci 0001:00:15.2: BAR 2 [mem 0x00000000-0x00000fff]
[ 0.064152] pci 0001:00:15.2: BAR 4 [mem 0x00000000-0x00000fff]
[ 0.064212] pci 0001:00:15.2: supports D1 D2
[ 0.064228] pci 0001:00:15.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.064671] pci 0001:00:16.0: [14e4:4320] type 00 class 0x028000 conventional PCI endpoint
[ 0.064712] pci 0001:00:16.0: BAR 0 [mem 0x8008e000-0x8008ffff]
[ 0.064790] pci 0001:00:16.0: supports D1 D2
[ 0.064806] pci 0001:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.065165] pci 0001:00:17.0: [106b:0022] type 00 class 0xff0000 conventional PCI endpoint
[ 0.065206] pci 0001:00:17.0: BAR 0 [mem 0x80000000-0x8007ffff]
[ 0.065684] pci 0001:00:18.0: [106b:0019] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.065725] pci 0001:00:18.0: BAR 0 [mem 0x80086000-0x80086fff]
[ 0.066099] pci 0001:00:19.0: [106b:0019] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.066140] pci 0001:00:19.0: BAR 0 [mem 0x80085000-0x80085fff]
[ 0.066541] pci 0001:00:1b.0: [1033:0035] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.066582] pci 0001:00:1b.0: BAR 0 [mem 0x80084000-0x80084fff]
[ 0.066662] pci 0001:00:1b.0: supports D1 D2
[ 0.066679] pci 0001:00:1b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.067153] pci 0001:00:1b.1: [1033:0035] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.067198] pci 0001:00:1b.1: BAR 0 [mem 0x80083000-0x80083fff]
[ 0.067278] pci 0001:00:1b.1: supports D1 D2
[ 0.067295] pci 0001:00:1b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.067638] pci 0001:00:1b.2: [1033:00e0] type 00 class 0x0c0320 conventional PCI endpoint
[ 0.067678] pci 0001:00:1b.2: BAR 0 [mem 0x80080000-0x800800ff]
[ 0.067756] pci 0001:00:1b.2: supports D1 D2
[ 0.067772] pci 0001:00:1b.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.068209] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.069690] PCI host bridge to bus 0002:00
[ 0.069723] pci_bus 0002:00: root bus resource [io 0x880000-0x107ffff] (bus address [0x0000-0x7fffff])
[ 0.069750] pci_bus 0002:00: root bus resource [mem 0xf5000000-0xf5ffffff]
[ 0.069774] pci_bus 0002:00: root bus resource [bus 00-ff]
[ 0.069793] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.070260] pci 0002:00:0b.0: [106b:0036] type 00 class 0x060000 conventional PCI endpoint
[ 0.070674] pci 0002:00:0d.0: [106b:0033] type 00 class 0xff0000 conventional PCI endpoint
[ 0.070716] pci 0002:00:0d.0: BAR 0 [mem 0xf5004000-0xf5007fff]
[ 0.071076] pci 0002:00:0e.0: [106b:0031] type 00 class 0x0c0010 conventional PCI endpoint
[ 0.071116] pci 0002:00:0e.0: BAR 0 [mem 0xf5000000-0xf5000fff]
[ 0.071187] pci 0002:00:0e.0: supports D1 D2
[ 0.071203] pci 0002:00:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.071681] pci 0002:00:0f.0: [106b:0032] type 00 class 0x020000 conventional PCI endpoint
[ 0.071726] pci 0002:00:0f.0: BAR 0 [mem 0xf5200000-0xf53fffff]
[ 0.071776] pci 0002:00:0f.0: ROM [mem 0xf5100000-0xf51fffff pref]
[ 0.072675] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.073148] PCI 0000:00 Cannot reserve Legacy IO [io 0xff780000-0xff780fff]
[ 0.073186] PCI 0001:00 Cannot reserve Legacy IO [io 0x0000-0x0fff]
[ 0.073220] pci_bus 0000:00: resource 4 [io 0xff780000-0xfff7ffff]
[ 0.073240] pci_bus 0000:00: resource 5 [mem 0xf1000000-0xf1ffffff]
[ 0.073260] pci_bus 0000:00: resource 6 [mem 0x90000000-0xafffffff]
[ 0.073301] pci 0001:00:15.2: BAR 2 [mem 0xf3000000-0xf3000fff]: assigned
[ 0.073327] pci 0001:00:15.2: BAR 4 [mem 0xf3001000-0xf3001fff]: assigned
[ 0.073350] pci 0001:00:15.2: BAR 0 [io 0x1000-0x1007]: assigned
[ 0.073371] pci 0001:00:15.2: BAR 1 [io 0x1008-0x100f]: assigned
[ 0.073407] pci_bus 0001:00: resource 4 [io 0x0000-0x7fffff]
[ 0.073426] pci_bus 0001:00: resource 5 [mem 0xf3000000-0xf3ffffff]
[ 0.073445] pci_bus 0001:00: resource 6 [mem 0x80000000-0x8fffffff]
[ 0.073467] pci_bus 0002:00: resource 4 [io 0x880000-0x107ffff]
[ 0.073486] pci_bus 0002:00: resource 5 [mem 0xf5000000-0xf5ffffff]
[ 0.135998] raid6: altivecx8 gen() 3312 MB/s
[ 0.192761] raid6: altivecx4 gen() 3388 MB/s
[ 0.249513] raid6: altivecx2 gen() 3175 MB/s
[ 0.306280] raid6: altivecx1 gen() 2592 MB/s
[ 0.363068] raid6: int32x8 gen() 358 MB/s
[ 0.419800] raid6: int32x4 gen() 441 MB/s
[ 0.476550] raid6: int32x2 gen() 794 MB/s
[ 0.533352] raid6: int32x1 gen() 551 MB/s
[ 0.533368] raid6: using algorithm altivecx4 gen() 3388 MB/s
[ 0.533384] raid6: using intx1 recovery algorithm
[ 0.536102] SCSI subsystem initialized
[ 0.536832] libata version 3.00 loaded.
[ 0.537233] usbcore: registered new interface driver usbfs
[ 0.537409] usbcore: registered new interface driver hub
[ 0.537518] usbcore: registered new device driver usb
[ 0.541126] pci 0000:00:10.0: vgaarb: setting as boot VGA device
[ 0.541168] pci 0000:00:10.0: vgaarb: bridge control possible
[ 0.541184] pci 0000:00:10.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
[ 0.541238] vgaarb: loaded
[ 0.541609] clocksource: Switched to clocksource timebase
[ 0.564354] NET: Registered PF_INET protocol family
[ 0.565163] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.568493] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 10240 bytes, linear)
[ 0.569339] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.570003] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.571882] TCP bind hash table entries: 8192 (order: 6, 327680 bytes, linear)
[ 0.572440] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.573096] UDP hash table entries: 512 (order: 2, 24576 bytes, linear)
[ 0.573282] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes, linear)
[ 0.574059] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.574492] pci 0001:00:12.0: enabling device (0000 -> 0002)
[ 0.574585] pci 0001:00:12.1: enabling device (0000 -> 0002)
[ 0.574638] pci 0001:00:12.2: enabling device (0004 -> 0006)
[ 0.574723] Apple USB OHCI 0001:00:18.0 disabled by firmware
[ 0.574741] pci 0001:00:18.0: Can't enable PCI device, BIOS handoff failed.
[ 0.574765] Apple USB OHCI 0001:00:19.0 disabled by firmware
[ 0.574780] pci 0001:00:19.0: Can't enable PCI device, BIOS handoff failed.
[ 0.574809] pci 0001:00:1b.0: enabling device (0000 -> 0002)
[ 0.574858] pci 0001:00:1b.1: enabling device (0000 -> 0002)
[ 0.574906] pci 0001:00:1b.2: enabling device (0004 -> 0006)
[ 0.575014] pci 0002:00:0f.0: CLS mismatch (32 != 1020), using 32 bytes
[ 0.576340] Thermal assist unit not available
[ 0.578922] Initialise system trusted keyrings
[ 0.579299] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 0.590933] 9p: Installing v9fs 9p2000 file system support
[ 0.591689] NET: Registered PF_ALG protocol family
[ 0.591776] xor: measuring software checksum speed
[ 0.600448] 8regs : 1151 MB/sec
[ 0.610122] 8regs_prefetch : 1018 MB/sec
[ 0.618217] 32regs : 1219 MB/sec
[ 0.627457] 32regs_prefetch : 1066 MB/sec
[ 0.629575] altivec : 4699 MB/sec
[ 0.629590] xor: using function: altivec (4699 MB/sec)
[ 0.629620] Key type asymmetric registered
[ 0.629635] Asymmetric key parser 'x509' registered
[ 0.635976] bounce: pool size: 64 pages
[ 0.636401] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.636677] io scheduler bfq registered
[ 0.641635] atomic64_test: passed
[ 0.642312] Using unsupported 1920x1080 (null) at a0008000, depth=8, pitch=2048
[ 0.683892] Console: switching to colour frame buffer device 240x67
[ 0.724094] fb0: Open Firmware frame buffer device on /pci@f0000000/ATY,AlteracParent@10/ATY,Alterac_A@0
[ 0.725125] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.728811] serial 0001:00:15.0: enabling device (0004 -> 0007)
[ 0.730270] 0001:00:15.0: ttyS0 at I/O 0x410 (irq = 58, base_baud = 115200) is a 16550A
[ 0.731070] serial 0001:00:15.1: enabling device (0004 -> 0007)
[ 0.732241] 0001:00:15.1: ttyS1 at I/O 0x400 (irq = 58, base_baud = 115200) is a 16550A
[ 0.734642] MacIO PCI driver attached to Keylargo chipset
[ 0.741627] sata_sil 0001:00:13.0: version 2.4
[ 0.741936] sata_sil 0001:00:13.0: enabling device (0004 -> 0007)
[ 0.744271] scsi host0: sata_sil
[ 0.745841] scsi host1: sata_sil
[ 0.746402] ata1: SATA max UDMA/100 mmio m512@0x80082000 tf 0x80082080 irq 53 lpm-pol 0
[ 0.746656] ata2: SATA max UDMA/100 mmio m512@0x80082000 tf 0x800820c0 irq 53 lpm-pol 0
[ 0.747189] pata-pci-macio 0002:00:0d.0: enabling device (0004 -> 0006)
[ 0.764943] pata-pci-macio 0002:00:0d.0: Activating pata-macio chipset UniNorth ATA-6, Apple bus ID 3
[ 0.766821] scsi host2: pata_macio
[ 0.767346] ata3: PATA max UDMA/100 irq 39 lpm-pol 0
[ 1.061301] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1.064287] ata1.00: ATA-9: SanDisk SSD PLUS 240GB, UF4500RL, max UDMA/133
[ 1.064508] ata1.00: 468877312 sectors, multi 1: LBA48 NCQ (depth 0/32)
[ 1.066060] ata1.00: Features: Dev-Sleep
[ 1.091772] ata1.00: configured for UDMA/100
[ 1.092721] scsi 0:0:0:0: Direct-Access ATA SanDisk SSD PLUS 00RL PQ: 0 ANSI: 5
[ 1.095422] sd 0:0:0:0: [sda] 468877312 512-byte logical blocks: (240 GB/224 GiB)
[ 1.095736] sd 0:0:0:0: [sda] Write Protect is off
[ 1.095897] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.096339] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.096771] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 1.100355] sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[ 1.102905] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.521633] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1.524257] ata2.00: ATA-9: WDC WD5000LPLX-60ZNTT1, 02.01A02, max UDMA/133
[ 1.524479] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 1.527194] ata2.00: configured for UDMA/100
[ 1.527889] scsi 1:0:0:0: Direct-Access ATA WDC WD5000LPLX-6 1A02 PQ: 0 ANSI: 5
[ 1.530271] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.530523] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1.530749] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.530911] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.531163] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.531627] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
[ 1.814955] pata-macio 0.0001f000:ata-4: Activating pata-macio chipset KeyLargo ATA-4, Apple bus ID 2
[ 1.825906] scsi host3: pata_macio
[ 1.835520] ata4: PATA max UDMA/66 irq 19 lpm-pol 0
[ 2.004234] ata4.00: CFA: DeLOCK 54143 512MB, 100511E, max UDMA/66
[ 2.013450] ata4.00: 1009008 sectors, multi 1: LBA
[ 2.276064] sdb: [mac] sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8
[ 2.287734] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.297759] scsi 3:0:0:0: Direct-Access ATA DeLOCK 54143 512 11E PQ: 0 ANSI: 5
[ 2.309743] sd 3:0:0:0: [sdc] 1009008 512-byte logical blocks: (517 MB/493 MiB)
[ 2.319201] sd 3:0:0:0: [sdc] Write Protect is off
[ 2.328465] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.337856] sd 3:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.347522] sd 3:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
[ 2.360234] sdc: [mac] sdc1 sdc2 sdc3 sdc4 sdc5 sdc6
[ 2.371845] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 2.881610] pata-macio 0.00020000:ata-3: Activating pata-macio chipset KeyLargo ATA-3, Apple bus ID 0
[ 2.893435] scsi host4: pata_macio
[ 2.903691] ata5: PATA max MWDMA2 irq 20 lpm-pol 0
[ 2.913983] sungem.c:v1.0 David S. Miller <davem@redhat.com>
[ 2.925559] gem 0002:00:0f.0 eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0a:95:9c:76:3a
[ 2.937114] ehci-pci 0001:00:12.2: EHCI Host Controller
[ 2.947238] ehci-pci 0001:00:12.2: new USB bus registered, assigned bus number 1
[ 2.947270] rtc-generic rtc-generic: registered as rtc0
[ 2.957638] ehci-pci 0001:00:12.2: irq 52, io mem 0x80081000
[ 2.967889] PowerMac i2c bus pmu 2 registered
[ 2.987770] PowerMac i2c bus pmu 1 registered
[ 2.998279] ehci-pci 0001:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.998394] PowerMac i2c bus mac-io 0 registered
[ 3.008635] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09
[ 3.017889] i2c i2c-2: No i2c address for /pci@f2000000/mac-io@17/i2c@18000/i2c-modem
[ 3.027481] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.027493] usb usb1: Product: EHCI Host Controller
[ 3.027500] usb usb1: Manufacturer: Linux 6.9.0-gentoo-PMacG4 ehci_hcd
[ 3.037637] PowerMac i2c bus uni-n 1 registered
[ 3.047032] usb usb1: SerialNumber: 0001:00:12.2
[ 3.066065] hub 1-0:1.0: USB hub found
[ 3.066317] i2c i2c-3: i2c-powermac: modalias failure on /uni-n@f8000000/i2c@f8001000/cereal@1c0
[ 3.076139] hub 1-0:1.0: 5 ports detected
[ 3.086083] PowerMac i2c bus uni-n 0 registered
[ 3.108349] ehci-pci 0001:00:1b.2: EHCI Host Controller
[ 3.116799] hid: raw HID events driver (C) Jiri Kosina
[ 3.125360] ehci-pci 0001:00:1b.2: new USB bus registered, assigned bus number 2
[ 3.135624] ata5.00: ATAPI: _NEC DVD_RW ND-3520A, 1.04, max UDMA/33
[ 3.145893] ehci-pci 0001:00:1b.2: irq 63, io mem 0x80080000
[ 3.155649] usbcore: registered new interface driver usbhid
[ 3.184847] usbhid: USB HID core driver
[ 3.184944] ehci-pci 0001:00:1b.2: USB 2.0 started, EHCI 1.00
[ 3.195924] NET: Registered PF_INET6 protocol family
[ 3.205155] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09
[ 3.217745] Segment Routing with IPv6
[ 3.224600] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.234824] In-situ OAM (IOAM) with IPv6
[ 3.244795] usb usb2: Product: EHCI Host Controller
[ 3.244805] usb usb2: Manufacturer: Linux 6.9.0-gentoo-PMacG4 ehci_hcd
[ 3.255633] 9pnet: Installing 9P2000 support
[ 3.264978] usb usb2: SerialNumber: 0001:00:1b.2
[ 3.266802] hub 2-0:1.0: USB hub found
[ 3.276435] drmem: No dynamic reconfiguration memory found
[ 3.285376] hub 2-0:1.0: 5 ports detected
[ 3.315262] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 3.335234] scsi 4:0:0:0: CD-ROM _NEC DVD_RW ND-3520A 1.04 PQ: 0 ANSI: 5
[ 3.345701] registered taskstats version 1
[ 3.356969] Loading compiled-in X.509 certificates
[ 3.379672] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 3.390022] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.498467] zswap: loaded using pool lzo/zsmalloc
[ 3.509005] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers
[ 3.519573] page_owner is disabled
[ 3.540574] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 3.553844] Btrfs loaded, zoned=no, fsverity=no
[ 4.866551] input: PMU as /devices/virtual/input/input0
[ 4.877306] netpoll: netconsole: local port 6666
[ 4.887322] netpoll: netconsole: local IPv4 address 192.168.2.8
[ 4.897281] netpoll: netconsole: interface 'eth0'
[ 4.907135] netpoll: netconsole: remote port 6666
[ 4.916862] netpoll: netconsole: remote IPv4 address 192.168.2.3
[ 4.926588] netpoll: netconsole: remote ethernet address a8:a1:59:16:4f:ea
[ 4.936373] netpoll: netconsole: device eth0 not up yet, forcing it
[ 5.021996] sungem_phy: PHY ID: 2060e1, addr: 0
[ 5.031908] gem 0002:00:0f.0 eth0: Found BCM5421 PHY
[ 8.721950] gem 0002:00:0f.0 eth0: Link is up at 1000 Mbps, full-duplex
[ 8.731705] gem 0002:00:0f.0 eth0: Pause is enabled (rxfifo: 10240 off: 7168 on: 5632)
[ 8.743073] printk: legacy console [netcon0] enabled
[ 8.760361] netconsole: network logging started
[ 8.786052] EXT4-fs (sda5): mounted filesystem fa07e66f-b4f9-404f-85d8-487d3c097aec ro with ordered data mode. Quota mode: disabled.
[ 8.796182] VFS: Mounted root (ext4 filesystem) readonly on device 8:5.
[ 8.809616] devtmpfs: mounted
[ 8.822516] Freeing unused kernel image (initmem) memory: 1360K
[ 8.848130] Checked W+X mappings: passed, no W+X pages found
[ 8.857897] rodata_test: all tests were successful
[ 8.867549] Run /sbin/init as init process
[ 8.877145] with arguments:
[ 8.886747] /sbin/init
[ 8.896266] with environment:
[ 8.905756] HOME=/
[ 8.915066] TERM=linux
[ 13.200997] ohci-pci 0001:00:12.0: OHCI PCI host controller
[ 13.219182] ohci-pci 0001:00:12.0: new USB bus registered, assigned bus number 3
[ 13.234687] ohci-pci 0001:00:12.0: irq 52, io mem 0x8008c000
[ 13.378077] b43-pci-bridge 0001:00:16.0: enabling device (0004 -> 0006)
[ 13.425128] ssb: Found chip with id 0x4306, rev 0x02 and package 0x00
[ 13.505883] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09
[ 13.514380] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.522606] usb usb3: Product: OHCI PCI host controller
[ 13.530755] usb usb3: Manufacturer: Linux 6.9.0-gentoo-PMacG4 ohci_hcd
[ 13.534143] b43-pci-bridge 0001:00:16.0: Sonics Silicon Backplane found on PCI device 0001:00:16.0
[ 13.538775] usb usb3: SerialNumber: 0001:00:12.0
[ 13.573167] hub 3-0:1.0: USB hub found
[ 13.643032] hub 3-0:1.0: 3 ports detected
[ 13.663972] ohci-pci 0001:00:12.1: OHCI PCI host controller
[ 13.709216] ohci-pci 0001:00:12.1: new USB bus registered, assigned bus number 4
[ 13.783235] ohci-pci 0001:00:12.1: irq 52, io mem 0x8008b000
[ 13.809116] firewire_ohci 0002:00:0e.0: enabling device (0000 -> 0002)
[ 13.824137] [drm] radeon kernel modesetting enabled.
[ 13.839518] Console: switching to colour dummy device 80x25
[ 13.841073] radeon 0000:00:10.0: enabling device (0006 -> 0007)
[ 13.842640] [drm] initializing kernel modesetting (RV350 0x1002:0x4150 0x1002:0x0002 0x00).
[ 13.842750] [drm] Forcing AGP to PCI mode
[ 13.842881] radeon 0000:00:10.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0x0000
[ 13.900595] [drm] Generation 2 PCI interface, using max accessible memory
[ 13.900693] radeon 0000:00:10.0: VRAM: 256M 0x00000000A0000000 - 0x00000000AFFFFFFF (256M used)
[ 13.900733] radeon 0000:00:10.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
[ 13.900923] [drm] Detected VRAM RAM=256M, BAR=256M
[ 13.900955] [drm] RAM width 128bits DDR
[ 13.906542] [drm] radeon: 256M of VRAM memory ready
[ 13.906625] [drm] radeon: 512M of GTT memory ready.
[ 13.906774] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 13.912328] firewire_ohci 0002:00:0e.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[ 13.980057] [drm] radeon: 1 quad pipes, 1 Z pipes initialized
[ 13.980161] [drm] PCI GART of 512M enabled (table at 0x0000000003780000).
[ 13.980312] radeon 0000:00:10.0: WB enabled
[ 13.980355] radeon 0000:00:10.0: fence driver on ring 0 use gpu addr 0x0000000080000000
[ 13.988684] [drm] radeon: irq initialized.
[ 13.988854] [drm] Loading R300 Microcode
[ 13.988915] Loading firmware: radeon/R300_cp.bin
[ 14.006525] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09
[ 14.006621] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.006698] usb usb4: Product: OHCI PCI host controller
[ 14.006739] usb usb4: Manufacturer: Linux 6.9.0-gentoo-PMacG4 ohci_hcd
[ 14.006780] usb usb4: SerialNumber: 0001:00:12.1
[ 14.013122] hub 4-0:1.0: USB hub found
[ 14.013358] hub 4-0:1.0: 2 ports detected
[ 14.014724] Apple USB OHCI 0001:00:18.0 disabled by firmware
[ 14.017235] Apple USB OHCI 0001:00:19.0 disabled by firmware
[ 14.017706] ohci-pci 0001:00:1b.0: OHCI PCI host controller
[ 14.017785] ohci-pci 0001:00:1b.0: new USB bus registered, assigned bus number 5
[ 14.018361] ohci-pci 0001:00:1b.0: irq 63, io mem 0x80084000
[ 14.089251] [drm] radeon: ring at 0x0000000080001000
[ 14.089661] [drm] ring test succeeded in 1 usecs
[ 14.102126] [drm] ib test succeeded in 0 usecs
[ 14.105524] stackdepot: allocating hash table of 65536 entries via kvcalloc
[ 14.153873] [drm] Radeon Display Connectors
[ 14.153951] [drm] Connector 0:
[ 14.154007] [drm] DVI-I-1
[ 14.154042] [drm] HPD2
[ 14.154075] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 14.154109] [drm] Encoders:
[ 14.154143] [drm] CRT1: INTERNAL_DAC1
[ 14.154170] [drm] DFP2: INTERNAL_DVO1
[ 14.154197] [drm] Connector 1:
[ 14.154232] [drm] DVI-I-2
[ 14.154265] [drm] HPD1
[ 14.154288] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 14.154330] [drm] Encoders:
[ 14.154364] [drm] CRT2: INTERNAL_DAC2
[ 14.154399] [drm] DFP1: INTERNAL_TMDS1
[ 14.154647] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:10.0 on minor 0
[ 14.167033] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09
[ 14.167135] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.167204] usb usb5: Product: OHCI PCI host controller
[ 14.167248] usb usb5: Manufacturer: Linux 6.9.0-gentoo-PMacG4 ohci_hcd
[ 14.167278] usb usb5: SerialNumber: 0001:00:1b.0
[ 14.171274] hub 5-0:1.0: USB hub found
[ 14.172173] hub 5-0:1.0: 3 ports detected
[ 14.180746] ohci-pci 0001:00:1b.1: OHCI PCI host controller
[ 14.180866] ohci-pci 0001:00:1b.1: new USB bus registered, assigned bus number 6
[ 14.181100] ohci-pci 0001:00:1b.1: irq 63, io mem 0x80083000
[ 14.329060] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09
[ 14.329170] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 14.329242] usb usb6: Product: OHCI PCI host controller
[ 14.329284] usb usb6: Manufacturer: Linux 6.9.0-gentoo-PMacG4 ohci_hcd
[ 14.329324] usb usb6: SerialNumber: 0001:00:1b.1
[ 14.335622] hub 6-0:1.0: USB hub found
[ 14.335807] hub 6-0:1.0: 2 ports detected
[ 14.388487] [drm] fb mappable at 0xA0040000
[ 14.388554] [drm] vram apper at 0xA0000000
[ 14.388613] [drm] size 8294400
[ 14.388648] [drm] fb depth is 24
[ 14.388682] [drm] pitch is 7680
[ 14.429463] firewire_core 0002:00:0e.0: created device fw0: GUID 000a95fffe9c763a, S800
[ 14.575941] Console: switching to colour frame buffer device 240x67
[ 14.629742] radeon 0000:00:10.0: [drm] fb0: radeondrmfb frame buffer device
[ 14.754450] gem 0002:00:0f.0 enP2p0s15: renamed from eth0 (while UP)
[ 14.768567] ADM1030 fan controller [@2c]
[ 14.788834] DS1775 digital thermometer [@49]
[ 14.789087] Temp: 48.9 C
[ 14.789095] Hyst: 70.0 C
[ 14.789207] OS: 75.0 C
[ 14.789363]
[ 15.705334] EXT4-fs (sda5): re-mounted fa07e66f-b4f9-404f-85d8-487d3c097aec r/w. Quota mode: disabled.
[ 15.788552] EXT4-fs (sda5): re-mounted fa07e66f-b4f9-404f-85d8-487d3c097aec r/w. Quota mode: disabled.
[ 15.962366] snd-aoa-fabric-layout: can use this codec
[ 16.083070] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 16.234889] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 16.236792] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 16.237215] Loading firmware: regulatory.db
[ 16.237861] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 16.238321] random: crng init done
[ 16.239748] cfg80211: failed to load regulatory.db
[ 16.336747] b43legacy-phy0: Broadcom 4306 WLAN found (core revision 4)
[ 16.411912] b43legacy-phy0: Loading firmware b43legacy/ucode4.fw
[ 16.412284] Loading firmware: b43legacy/ucode4.fw
[ 16.414377] b43legacy-phy0: Loading firmware b43legacy/pcm4.fw
[ 16.414729] Loading firmware: b43legacy/pcm4.fw
[ 16.415589] Broadcom 43xx-legacy driver loaded [ Features: PLID ]
[ 16.416022] b43legacy-phy0: Loading firmware b43legacy/b0g0initvals2.fw
[ 16.416341] Loading firmware: b43legacy/b0g0initvals2.fw
[ 16.556134] Adding 8388604k swap on /dev/sdb6. Priority:-2 extents:1 across:8388604k
[ 16.779037] EXT4-fs (sdc5): mounting ext2 file system using the ext4 subsystem
[ 16.783076] EXT4-fs (sdc5): warning: mounting unchecked fs, running e2fsck is recommended
[ 16.788727] EXT4-fs (sdc5): mounted filesystem e4e8af9e-0f0d-44f9-b983-71bf61d782de r/w without journal. Quota mode: disabled.
[ 16.806097] ext2 filesystem being mounted at /boot supports timestamps until 2038-01-19 (0x7fffffff)
[ 16.825391] BTRFS: device label tmp devid 1 transid 4575 /dev/sda6 (8:6) scanned by mount (890)
[ 16.844648] BTRFS info (device sda6): first mount of filesystem 65162d91-887e-4e48-a356-fbf7093eefb5
[ 16.858533] BTRFS info (device sda6): using xxhash64 (xxhash64-generic) checksum algorithm
[ 16.875185] BTRFS info (device sda6): using free-space-tree
[ 99.431468] kswapd0: page allocation failure: order:0, mode:0xcc0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0
[ 99.431584] CPU: 0 PID: 41 Comm: kswapd0 Not tainted 6.9.0-gentoo-PMacG4 #1
[ 99.431613] Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
[ 99.431638] Call Trace:
[ 99.431657] [c1c65940] [c07926d4] dump_stack_lvl+0x80/0xac (unreliable)
[ 99.431698] [c1c65960] [c01b6234] warn_alloc+0x100/0x178
[ 99.431730] [c1c659c0] [c01b661c] __alloc_pages+0x370/0x8d0
[ 99.431757] [c1c65a80] [c01c4854] __read_swap_cache_async+0xc0/0x1cc
[ 99.431790] [c1c65ad0] [c01cb580] zswap_writeback_entry+0x50/0x154
[ 99.431824] [c1c65be0] [c01cb6f4] shrink_memcg_cb+0x70/0xec
[ 99.431855] [c1c65c10] [c019518c] __list_lru_walk_one+0xa0/0x154
[ 99.431890] [c1c65c70] [c01952a4] list_lru_walk_one+0x64/0x7c
[ 99.431919] [c1c65ca0] [c01cad00] zswap_shrinker_scan+0xac/0xc4
[ 99.431948] [c1c65cd0] [c018052c] do_shrink_slab+0x18c/0x304
[ 99.431985] [c1c65d20] [c0180a40] shrink_slab+0x174/0x260
[ 99.432015] [c1c65da0] [c017cb0c] shrink_one+0xbc/0x134
[ 99.432044] [c1c65dd0] [c017e3e4] shrink_node+0x238/0x84c
[ 99.432075] [c1c65e50] [c017ed38] balance_pgdat+0x340/0x650
[ 99.432105] [c1c65f50] [c017f270] kswapd+0x228/0x25c
[ 99.432135] [c1c65fc0] [c006bbac] kthread+0xe4/0xe8
[ 99.432172] [c1c65ff0] [c0015304] start_kernel_thread+0x10/0x14
[ 99.432215] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 99.432222] cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
[ 99.432230] node 0: slabs: 15, objs: 225, free: 0
[ 99.432294] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 99.432300] cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
[ 99.432307] node 0: slabs: 15, objs: 225, free: 0
[ 99.432359] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 99.432365] cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
[ 99.432372] node 0: slabs: 15, objs: 225, free: 0
[ 99.432423] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 99.432429] cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
[ 99.432436] node 0: slabs: 15, objs: 225, free: 0
[ 99.432492] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 99.432498] cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
[ 99.432505] node 0: slabs: 15, objs: 225, free: 0
[ 99.432533] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 99.432539] cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
[ 99.432546] kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
[ 99.432550] node 0: slabs: 33, objs: 165, free: 0
[ 99.432567] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 99.432573] cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
[ 99.432580] node 0: slabs: 15, objs: 225, free: 0
[ 99.432606] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 99.432612] cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
[ 99.432619] kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
[ 99.432623] node 0: slabs: 33, objs: 165, free: 0
[ 99.432640] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 99.432646] cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
[ 99.432653] node 0: slabs: 15, objs: 225, free: 0
[ 99.432678] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 99.432684] cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
[ 99.432691] kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
[ 99.432696] node 0: slabs: 33, objs: 165, free: 0
[ 99.434466] Mem-Info:
[ 99.435075] active_anon:340071 inactive_anon:139179 isolated_anon:0
[ 99.435075] active_file:8297 inactive_file:2506 isolated_file:0
[ 99.435075] unevictable:4 dirty:1 writeback:18
[ 99.435075] slab_reclaimable:1377 slab_unreclaimable:7426
[ 99.435075] mapped:6804 shmem:112 pagetables:946
[ 99.435075] sec_pagetables:0 bounce:0
[ 99.435075] kernel_misc_reclaimable:0
[ 99.435075] free:1141 free_pcp:7 free_cma:0
[ 99.435141] Node 0 active_anon:1360284kB inactive_anon:556716kB active_file:33188kB inactive_file:10024kB unevictable:16kB isolated(anon):0kB isolated(file):0kB mapped:27216kB dirty:4kB writeback:72kB shmem:448kB writeback_tmp:0kB kernel_stack:1560kB pagetables:3784kB sec_pagetables:0kB all_unreclaimable? no
[ 99.435200] DMA free:56kB boost:7756kB min:11208kB low:12068kB high:12928kB reserved_highatomic:0KB active_anon:635128kB inactive_anon:58260kB active_file:268kB inactive_file:3000kB unevictable:0kB writepending:324kB present:786432kB managed:746644kB mlocked:0kB bounce:0kB free_pcp:28kB local_pcp:28kB free_cma:0kB
[ 99.435258] lowmem_reserve[]: 0 0 1280 1280
[ 99.435296] DMA: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 0kB
[ 99.435375] 63943 total pagecache pages
[ 99.435393] 53024 pages in swap cache
[ 99.435415] Free swap = 8057248kB
[ 99.435434] Total swap = 8388604kB
[ 99.435456] 524288 pages RAM
[ 99.435477] 327680 pages HighMem/MovableOnly
[ 99.435498] 9947 pages reserved
[ 182.463445] warn_alloc: 396 callbacks suppressed
[ 182.463482] kswapd0: page allocation failure: order:0, mode:0xcc0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0
[ 182.463640] CPU: 1 PID: 41 Comm: kswapd0 Not tainted 6.9.0-gentoo-PMacG4 #1
[ 182.463667] Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
[ 182.463691] Call Trace:
[ 182.463712] [c1c65940] [c07926d4] dump_stack_lvl+0x80/0xac (unreliable)
[ 182.463759] [c1c65960] [c01b6234] warn_alloc+0x100/0x178
[ 182.463794] [c1c659c0] [c01b661c] __alloc_pages+0x370/0x8d0
[ 182.463823] [c1c65a80] [c01c4854] __read_swap_cache_async+0xc0/0x1cc
[ 182.463857] [c1c65ad0] [c01cb580] zswap_writeback_entry+0x50/0x154
[ 182.463893] [c1c65be0] [c01cb6f4] shrink_memcg_cb+0x70/0xec
[ 182.463923] [c1c65c10] [c019518c] __list_lru_walk_one+0xa0/0x154
[ 182.463959] [c1c65c70] [c01952a4] list_lru_walk_one+0x64/0x7c
[ 182.463989] [c1c65ca0] [c01cad00] zswap_shrinker_scan+0xac/0xc4
[ 182.464019] [c1c65cd0] [c018052c] do_shrink_slab+0x18c/0x304
[ 182.464060] [c1c65d20] [c0180a40] shrink_slab+0x174/0x260
[ 182.464091] [c1c65da0] [c017cb0c] shrink_one+0xbc/0x134
[ 182.464122] [c1c65dd0] [c017e3e4] shrink_node+0x238/0x84c
[ 182.464152] [c1c65e50] [c017ed38] balance_pgdat+0x340/0x650
[ 182.464181] [c1c65f50] [c017f270] kswapd+0x228/0x25c
[ 182.464216] slab_out_of_memory: 53 callbacks suppressed
[ 182.464222] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 182.464228] cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
[ 182.464236] node 0: slabs: 18, objs: 270, free: 0
[ 182.464305] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 182.464311] cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
[ 182.464318] node 0: slabs: 18, objs: 270, free: 0
[ 182.464378] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 182.464385] cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
[ 182.464391] node 0: slabs: 18, objs: 270, free: 0
[ 182.464446] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 182.464452] cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
[ 182.464459] node 0: slabs: 18, objs: 270, free: 0
[ 182.464517] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 182.464523] cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
[ 182.464530] node 0: slabs: 18, objs: 270, free: 0
[ 182.464557] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 182.464563] cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
[ 182.464570] kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
[ 182.464574] node 0: slabs: 33, objs: 165, free: 0
[ 182.464592] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 182.464597] cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
[ 182.464604] node 0: slabs: 18, objs: 270, free: 0
[ 182.464631] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 182.464637] cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
[ 182.464644] kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
[ 182.464648] node 0: slabs: 33, objs: 165, free: 0
[ 182.464664] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 182.464670] cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
[ 182.464677] node 0: slabs: 18, objs: 270, free: 0
[ 182.464703] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 182.464709] cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
[ 182.464716] kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
[ 182.464720] node 0: slabs: 33, objs: 165, free: 0
[ 182.465552] [c1c65fc0] [c006bbac] kthread+0xe4/0xe8
[ 182.465611] [c1c65ff0] [c0015304] start_kernel_thread+0x10/0x14
[ 182.466723] Mem-Info:
[ 182.467424] active_anon:351976 inactive_anon:123514 isolated_anon:0
[ 182.467424] active_file:4648 inactive_file:2081 isolated_file:0
[ 182.467424] unevictable:4 dirty:1 writeback:39
[ 182.467424] slab_reclaimable:918 slab_unreclaimable:7222
[ 182.467424] mapped:5359 shmem:21 pagetables:940
[ 182.467424] sec_pagetables:0 bounce:0
[ 182.467424] kernel_misc_reclaimable:0
[ 182.467424] free:2563 free_pcp:142 free_cma:0
[ 182.467491] Node 0 active_anon:1407904kB inactive_anon:494056kB active_file:18592kB inactive_file:8324kB unevictable:16kB isolated(anon):0kB isolated(file):0kB mapped:21436kB dirty:4kB writeback:156kB shmem:84kB writeback_tmp:0kB kernel_stack:1552kB pagetables:3760kB sec_pagetables:0kB all_unreclaimable? no
[ 182.467553] DMA free:0kB boost:7756kB min:11208kB low:12068kB high:12928kB reserved_highatomic:0KB active_anon:199336kB inactive_anon:491432kB active_file:4612kB inactive_file:5980kB unevictable:0kB writepending:660kB present:786432kB managed:746644kB mlocked:0kB bounce:0kB free_pcp:568kB local_pcp:20kB free_cma:0kB
[ 182.467608] lowmem_reserve[]: 0 0 1280 1280
[ 182.467661] DMA: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 0kB
[ 182.467744] 45961 total pagecache pages
[ 182.467773] 39207 pages in swap cache
[ 182.467795] Free swap = 8093096kB
[ 182.467824] Total swap = 8388604kB
[ 182.467852] 524288 pages RAM
[ 182.467872] 327680 pages HighMem/MovableOnly
[ 182.467902] 9947 pages reserved
[ 192.781883] warn_alloc: 343 callbacks suppressed
[ 192.781911] kswapd0: page allocation failure: order:0, mode:0xcc0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0
[ 192.782022] CPU: 0 PID: 41 Comm: kswapd0 Not tainted 6.9.0-gentoo-PMacG4 #1
[ 192.782050] Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
[ 192.782074] Call Trace:
[ 192.782094] [c1c65940] [c07926d4] dump_stack_lvl+0x80/0xac (unreliable)
[ 192.782138] [c1c65960] [c01b6234] warn_alloc+0x100/0x178
[ 192.782170] [c1c659c0] [c01b661c] __alloc_pages+0x370/0x8d0
[ 192.782199] [c1c65a80] [c01c4854] __read_swap_cache_async+0xc0/0x1cc
[ 192.782231] [c1c65ad0] [c01cb580] zswap_writeback_entry+0x50/0x154
[ 192.782265] [c1c65be0] [c01cb6f4] shrink_memcg_cb+0x70/0xec
[ 192.782295] [c1c65c10] [c019518c] __list_lru_walk_one+0xa0/0x154
[ 192.782334] slab_out_of_memory: 59 callbacks suppressed
[ 192.782341] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 192.782347] cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
[ 192.782355] node 0: slabs: 18, objs: 270, free: 0
[ 192.782421] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 192.782428] cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
[ 192.782434] node 0: slabs: 18, objs: 270, free: 0
[ 192.782487] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 192.782493] cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
[ 192.782500] node 0: slabs: 18, objs: 270, free: 0
[ 192.782551] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 192.782558] cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
[ 192.782565] node 0: slabs: 18, objs: 270, free: 0
[ 192.782617] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 192.782623] cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
[ 192.782630] node 0: slabs: 18, objs: 270, free: 0
[ 192.782655] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 192.782662] cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
[ 192.782668] kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
[ 192.782672] node 0: slabs: 33, objs: 165, free: 0
[ 192.782689] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 192.782695] cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
[ 192.782702] node 0: slabs: 18, objs: 270, free: 0
[ 192.782727] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 192.782733] cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
[ 192.782740] kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
[ 192.782744] node 0: slabs: 33, objs: 165, free: 0
[ 192.782760] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 192.782766] cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
[ 192.782773] node 0: slabs: 18, objs: 270, free: 0
[ 192.782798] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 192.782804] cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
[ 192.782810] kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
[ 192.782814] node 0: slabs: 33, objs: 165, free: 0
[ 192.783626] [c1c65c70] [c01952a4] list_lru_walk_one+0x64/0x7c
[ 192.783675] [c1c65ca0] [c01cad00] zswap_shrinker_scan+0xac/0xc4
[ 192.784576] [c1c65cd0] [c018052c] do_shrink_slab+0x18c/0x304
[ 192.785262] [c1c65d20] [c0180a40] shrink_slab+0x174/0x260
[ 192.785300] [c1c65da0] [c017cb0c] shrink_one+0xbc/0x134
[ 192.785329] [c1c65dd0] [c017e3e4] shrink_node+0x238/0x84c
[ 192.785358] [c1c65e50] [c017ed38] balance_pgdat+0x340/0x650
[ 192.785387] [c1c65f50] [c017f270] kswapd+0x228/0x25c
[ 192.785429] [c1c65fc0] [c006bbac] kthread+0xe4/0xe8
[ 192.785492] [c1c65ff0] [c0015304] start_kernel_thread+0x10/0x14
[ 192.785698] Mem-Info:
[ 192.785740] active_anon:235002 inactive_anon:240975 isolated_anon:0
[ 192.785740] active_file:4356 inactive_file:2551 isolated_file:0
[ 192.785740] unevictable:4 dirty:7 writeback:19
[ 192.785740] slab_reclaimable:1008 slab_unreclaimable:7218
[ 192.785740] mapped:5601 shmem:21 pagetables:939
[ 192.785740] sec_pagetables:0 bounce:0
[ 192.785740] kernel_misc_reclaimable:0
[ 192.785740] free:1340 free_pcp:23 free_cma:0
[ 192.785799] Node 0 active_anon:940008kB inactive_anon:963900kB active_file:17424kB inactive_file:10204kB unevictable:16kB isolated(anon):0kB isolated(file):0kB mapped:22404kB dirty:28kB writeback:76kB shmem:84kB writeback_tmp:0kB kernel_stack:1552kB pagetables:3756kB sec_pagetables:0kB all_unreclaimable? no
[ 192.785871] DMA free:0kB boost:7756kB min:11208kB low:12068kB high:12928kB reserved_highatomic:0KB active_anon:644060kB inactive_anon:36332kB active_file:5276kB inactive_file:5516kB unevictable:0kB writepending:348kB present:786432kB managed:746644kB mlocked:0kB bounce:0kB free_pcp:92kB local_pcp:92kB free_cma:0kB
[ 192.785926] lowmem_reserve[]: 0 0 1280 1280
[ 192.785965] DMA: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 0kB
[ 192.786044] 116345 total pagecache pages
[ 192.786061] 109413 pages in swap cache
[ 192.786081] Free swap = 7819300kB
[ 192.786102] Total swap = 8388604kB
[ 192.786132] 524288 pages RAM
[ 192.786153] 327680 pages HighMem/MovableOnly
[ 192.786181] 9947 pages reserved
[ 331.060012] CPU-temp: 55.0 C
[ 331.060047] , Case: 32.8 C
[ 331.060087] , Fan: 0 (tuned +0)
[ 371.573752] CPU-temp: 55.3 C
[ 371.573787] , Case: 33.0 C
[ 371.573826] , Fan: 0 (tuned +0)
[ 388.697804] BTRFS info (device sda6): last unmount of filesystem 65162d91-887e-4e48-a356-fbf7093eefb5
[ 388.740923] EXT4-fs (sdc5): unmounting filesystem e4e8af9e-0f0d-44f9-b983-71bf61d782de.
[ 391.409778] elogind-daemon[1534]: Received signal 15 [TERM]
[ 392.006616] EXT4-fs (sda5): re-mounted fa07e66f-b4f9-404f-85d8-487d3c097aec ro. Quota mode: disabled.
[ 392.142314] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 392.143518] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 392.145158] reboot: Restarting system
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-05-15 20:45 ` Erhard Furtner
@ 2024-05-15 22:06 ` Yu Zhao
2024-06-01 6:01 ` Yu Zhao
0 siblings, 1 reply; 45+ messages in thread
From: Yu Zhao @ 2024-05-15 22:06 UTC (permalink / raw)
To: Erhard Furtner; +Cc: linux-mm, linux-kernel, linuxppc-dev
On Wed, May 15, 2024 at 2:45 PM Erhard Furtner <erhard_f@mailbox.org> wrote:
>
> On Wed, 8 May 2024 20:21:11 +0200
> Erhard Furtner <erhard_f@mailbox.org> wrote:
>
> > Greetings!
> >
> > Got that on my dual CPU PowerMac G4 DP shortly after boot. This does not happen every time at bootup though:
> >
> > [...]
> > kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0
> > CPU: 1 PID: 40 Comm: kswapd0 Not tainted 6.8.9-gentoo-PMacG4 #1
> > Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
>
> Very similar page allocation failure on the same machine on kernel 6.9.0 too. Seems it can easily be provoked by running a memory stressor, e.g. "stress-ng --vm 2 --vm-bytes 1930M --verify -v":
>
> [...]
> kswapd0: page allocation failure: order:0, mode:0xcc0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0
> CPU: 0 PID: 41 Comm: kswapd0 Not tainted 6.9.0-gentoo-PMacG4 #1
> Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
> Call Trace:
> [c1c65940] [c07926d4] dump_stack_lvl+0x80/0xac (unreliable)
> [c1c65960] [c01b6234] warn_alloc+0x100/0x178
> [c1c659c0] [c01b661c] __alloc_pages+0x370/0x8d0
> [c1c65a80] [c01c4854] __read_swap_cache_async+0xc0/0x1cc
> [c1c65ad0] [c01cb580] zswap_writeback_entry+0x50/0x154
> [c1c65be0] [c01cb6f4] shrink_memcg_cb+0x70/0xec
> [c1c65c10] [c019518c] __list_lru_walk_one+0xa0/0x154
> [c1c65c70] [c01952a4] list_lru_walk_one+0x64/0x7c
> [c1c65ca0] [c01cad00] zswap_shrinker_scan+0xac/0xc4
> [c1c65cd0] [c018052c] do_shrink_slab+0x18c/0x304
> [c1c65d20] [c0180a40] shrink_slab+0x174/0x260
> [c1c65da0] [c017cb0c] shrink_one+0xbc/0x134
> [c1c65dd0] [c017e3e4] shrink_node+0x238/0x84c
> [c1c65e50] [c017ed38] balance_pgdat+0x340/0x650
> [c1c65f50] [c017f270] kswapd+0x228/0x25c
> [c1c65fc0] [c006bbac] kthread+0xe4/0xe8
> [c1c65ff0] [c0015304] start_kernel_thread+0x10/0x14
> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> node 0: slabs: 15, objs: 225, free: 0
> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> node 0: slabs: 15, objs: 225, free: 0
> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> node 0: slabs: 15, objs: 225, free: 0
> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> node 0: slabs: 15, objs: 225, free: 0
> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> node 0: slabs: 15, objs: 225, free: 0
> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
> kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
> node 0: slabs: 33, objs: 165, free: 0
> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> node 0: slabs: 15, objs: 225, free: 0
> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
> kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
> node 0: slabs: 33, objs: 165, free: 0
> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> node 0: slabs: 15, objs: 225, free: 0
> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
> kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
> node 0: slabs: 33, objs: 165, free: 0
> Mem-Info:
> active_anon:340071 inactive_anon:139179 isolated_anon:0
> active_file:8297 inactive_file:2506 isolated_file:0
> unevictable:4 dirty:1 writeback:18
> slab_reclaimable:1377 slab_unreclaimable:7426
> mapped:6804 shmem:112 pagetables:946
> sec_pagetables:0 bounce:0
> kernel_misc_reclaimable:0
> free:1141 free_pcp:7 free_cma:0
> Node 0 active_anon:1360284kB inactive_anon:556716kB active_file:33188kB inactive_file:10024kB unevictable:16kB isolated(anon):0kB isolated(file):0kB mapped:27216kB dirty:4kB writeback:72kB shmem:448kB writeback_tmp:0kB kernel_stack:1560kB pagetables:3784kB sec_pagetables:0kB all_unreclaimable? no
> DMA free:56kB boost:7756kB min:11208kB low:12068kB high:12928kB reserved_highatomic:0KB active_anon:635128kB inactive_anon:58260kB active_file:268kB inactive_file:3000kB unevictable:0kB writepending:324kB present:786432kB managed:746644kB mlocked:0kB bounce:0kB free_pcp:28kB local_pcp:28kB free_cma:0kB
> lowmem_reserve[]: 0 0 1280 1280
> DMA: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 0kB
> 63943 total pagecache pages
> 53024 pages in swap cache
> Free swap = 8057248kB
> Total swap = 8388604kB
> 524288 pages RAM
> 327680 pages HighMem/MovableOnly
> 9947 pages reserved
> warn_alloc: 396 callbacks suppressed
> kswapd0: page allocation failure: order:0, mode:0xcc0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0
> CPU: 1 PID: 41 Comm: kswapd0 Not tainted 6.9.0-gentoo-PMacG4 #1
> Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
> Call Trace:
> [c1c65940] [c07926d4] dump_stack_lvl+0x80/0xac (unreliable)
> [c1c65960] [c01b6234] warn_alloc+0x100/0x178
> [c1c659c0] [c01b661c] __alloc_pages+0x370/0x8d0
> [c1c65a80] [c01c4854] __read_swap_cache_async+0xc0/0x1cc
> [c1c65ad0] [c01cb580] zswap_writeback_entry+0x50/0x154
> [c1c65be0] [c01cb6f4] shrink_memcg_cb+0x70/0xec
> [c1c65c10] [c019518c] __list_lru_walk_one+0xa0/0x154
> [c1c65c70] [c01952a4] list_lru_walk_one+0x64/0x7c
> [c1c65ca0] [c01cad00] zswap_shrinker_scan+0xac/0xc4
> [c1c65cd0] [c018052c] do_shrink_slab+0x18c/0x304
> [c1c65d20] [c0180a40] shrink_slab+0x174/0x260
> [c1c65da0] [c017cb0c] shrink_one+0xbc/0x134
> [c1c65dd0] [c017e3e4] shrink_node+0x238/0x84c
> [c1c65e50] [c017ed38] balance_pgdat+0x340/0x650
> [c1c65f50] [c017f270] kswapd+0x228/0x25c
> slab_out_of_memory: 53 callbacks suppressed
> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> node 0: slabs: 18, objs: 270, free: 0
> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> node 0: slabs: 18, objs: 270, free: 0
> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> node 0: slabs: 18, objs: 270, free: 0
> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> node 0: slabs: 18, objs: 270, free: 0
> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> node 0: slabs: 18, objs: 270, free: 0
> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
> kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
> node 0: slabs: 33, objs: 165, free: 0
> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> node 0: slabs: 18, objs: 270, free: 0
> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
> kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
> node 0: slabs: 33, objs: 165, free: 0
> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> node 0: slabs: 18, objs: 270, free: 0
> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
> kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
> node 0: slabs: 33, objs: 165, free: 0
> [c1c65fc0] [c006bbac] kthread+0xe4/0xe8
> [c1c65ff0] [c0015304] start_kernel_thread+0x10/0x14
> Mem-Info:
> active_anon:351976 inactive_anon:123514 isolated_anon:0
> active_file:4648 inactive_file:2081 isolated_file:0
> unevictable:4 dirty:1 writeback:39
> slab_reclaimable:918 slab_unreclaimable:7222
> mapped:5359 shmem:21 pagetables:940
> sec_pagetables:0 bounce:0
> kernel_misc_reclaimable:0
> free:2563 free_pcp:142 free_cma:0
> Node 0 active_anon:1407904kB inactive_anon:494056kB active_file:18592kB inactive_file:8324kB unevictable:16kB isolated(anon):0kB isolated(file):0kB mapped:21436kB dirty:4kB writeback:156kB shmem:84kB writeback_tmp:0kB kernel_stack:1552kB pagetables:3760kB sec_pagetables:0kB all_unreclaimable? no
> DMA free:0kB boost:7756kB min:11208kB low:12068kB high:12928kB reserved_highatomic:0KB active_anon:199336kB inactive_anon:491432kB active_file:4612kB inactive_file:5980kB unevictable:0kB writepending:660kB present:786432kB managed:746644kB mlocked:0kB bounce:0kB free_pcp:568kB local_pcp:20kB free_cma:0kB
> lowmem_reserve[]: 0 0 1280 1280
> DMA: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 0kB
> 45961 total pagecache pages
> 39207 pages in swap cache
> Free swap = 8093096kB
> Total swap = 8388604kB
> 524288 pages RAM
> 327680 pages HighMem/MovableOnly
> 9947 pages reserved
> warn_alloc: 343 callbacks suppressed
> kswapd0: page allocation failure: order:0, mode:0xcc0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0
> CPU: 0 PID: 41 Comm: kswapd0 Not tainted 6.9.0-gentoo-PMacG4 #1
> Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
> Call Trace:
> [c1c65940] [c07926d4] dump_stack_lvl+0x80/0xac (unreliable)
> [c1c65960] [c01b6234] warn_alloc+0x100/0x178
> [c1c659c0] [c01b661c] __alloc_pages+0x370/0x8d0
> [c1c65a80] [c01c4854] __read_swap_cache_async+0xc0/0x1cc
> [c1c65ad0] [c01cb580] zswap_writeback_entry+0x50/0x154
> [c1c65be0] [c01cb6f4] shrink_memcg_cb+0x70/0xec
> [c1c65c10] [c019518c] __list_lru_walk_one+0xa0/0x154
> slab_out_of_memory: 59 callbacks suppressed
> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> node 0: slabs: 18, objs: 270, free: 0
> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> node 0: slabs: 18, objs: 270, free: 0
> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> node 0: slabs: 18, objs: 270, free: 0
> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> node 0: slabs: 18, objs: 270, free: 0
> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> node 0: slabs: 18, objs: 270, free: 0
> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
> kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
> node 0: slabs: 33, objs: 165, free: 0
> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> node 0: slabs: 18, objs: 270, free: 0
> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
> kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
> node 0: slabs: 33, objs: 165, free: 0
> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> node 0: slabs: 18, objs: 270, free: 0
> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
> kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
> node 0: slabs: 33, objs: 165, free: 0
> [c1c65c70] [c01952a4] list_lru_walk_one+0x64/0x7c
> [c1c65ca0] [c01cad00] zswap_shrinker_scan+0xac/0xc4
> [c1c65cd0] [c018052c] do_shrink_slab+0x18c/0x304
> [c1c65d20] [c0180a40] shrink_slab+0x174/0x260
> [c1c65da0] [c017cb0c] shrink_one+0xbc/0x134
> [c1c65dd0] [c017e3e4] shrink_node+0x238/0x84c
> [c1c65e50] [c017ed38] balance_pgdat+0x340/0x650
> [c1c65f50] [c017f270] kswapd+0x228/0x25c
> [c1c65fc0] [c006bbac] kthread+0xe4/0xe8
> [c1c65ff0] [c0015304] start_kernel_thread+0x10/0x14
> Mem-Info:
> active_anon:235002 inactive_anon:240975 isolated_anon:0
> active_file:4356 inactive_file:2551 isolated_file:0
> unevictable:4 dirty:7 writeback:19
> slab_reclaimable:1008 slab_unreclaimable:7218
> mapped:5601 shmem:21 pagetables:939
> sec_pagetables:0 bounce:0
> kernel_misc_reclaimable:0
> free:1340 free_pcp:23 free_cma:0
> Node 0 active_anon:940008kB inactive_anon:963900kB active_file:17424kB inactive_file:10204kB unevictable:16kB isolated(anon):0kB isolated(file):0kB mapped:22404kB dirty:28kB writeback:76kB shmem:84kB writeback_tmp:0kB kernel_stack:1552kB pagetables:3756kB sec_pagetables:0kB all_unreclaimable? no
> DMA free:0kB boost:7756kB min:11208kB low:12068kB high:12928kB reserved_highatomic:0KB active_anon:644060kB inactive_anon:36332kB active_file:5276kB inactive_file:5516kB unevictable:0kB writepending:348kB present:786432kB managed:746644kB mlocked:0kB bounce:0kB free_pcp:92kB local_pcp:92kB free_cma:0kB
> lowmem_reserve[]: 0 0 1280 1280
> DMA: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 0kB
> 116345 total pagecache pages
> 109413 pages in swap cache
> Free swap = 7819300kB
> Total swap = 8388604kB
> 524288 pages RAM
> 327680 pages HighMem/MovableOnly
> 9947 pages reserved
>
>
> I switched from zstd to lzo as zswap default compressor so zstd does not show up on the dmesg. But the rest looks pretty similar.
>
> Full dmesg and kernel .config attached.
>
> Regards,
> Erhard
Hi Erhard,
Thanks for the reports. I'll take a look at them and get back to you
in a few days.
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-05-15 22:06 ` Yu Zhao
@ 2024-06-01 6:01 ` Yu Zhao
2024-06-01 15:37 ` David Hildenbrand
2024-06-02 18:03 ` Erhard Furtner
0 siblings, 2 replies; 45+ messages in thread
From: Yu Zhao @ 2024-06-01 6:01 UTC (permalink / raw)
To: Erhard Furtner; +Cc: linux-mm, linux-kernel, linuxppc-dev
On Wed, May 15, 2024 at 4:06 PM Yu Zhao <yuzhao@google.com> wrote:
>
> On Wed, May 15, 2024 at 2:45 PM Erhard Furtner <erhard_f@mailbox.org> wrote:
> >
> > On Wed, 8 May 2024 20:21:11 +0200
> > Erhard Furtner <erhard_f@mailbox.org> wrote:
> >
> > > Greetings!
> > >
> > > Got that on my dual CPU PowerMac G4 DP shortly after boot. This does not happen every time at bootup though:
> > >
> > > [...]
> > > kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0
> > > CPU: 1 PID: 40 Comm: kswapd0 Not tainted 6.8.9-gentoo-PMacG4 #1
> > > Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
> >
> > Very similar page allocation failure on the same machine on kernel 6.9.0 too. Seems it can easily be provoked by running a memory stressor, e.g. "stress-ng --vm 2 --vm-bytes 1930M --verify -v":
> >
> > [...]
> > kswapd0: page allocation failure: order:0, mode:0xcc0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0
> > CPU: 0 PID: 41 Comm: kswapd0 Not tainted 6.9.0-gentoo-PMacG4 #1
> > Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
> > Call Trace:
> > [c1c65940] [c07926d4] dump_stack_lvl+0x80/0xac (unreliable)
> > [c1c65960] [c01b6234] warn_alloc+0x100/0x178
> > [c1c659c0] [c01b661c] __alloc_pages+0x370/0x8d0
> > [c1c65a80] [c01c4854] __read_swap_cache_async+0xc0/0x1cc
> > [c1c65ad0] [c01cb580] zswap_writeback_entry+0x50/0x154
> > [c1c65be0] [c01cb6f4] shrink_memcg_cb+0x70/0xec
> > [c1c65c10] [c019518c] __list_lru_walk_one+0xa0/0x154
> > [c1c65c70] [c01952a4] list_lru_walk_one+0x64/0x7c
> > [c1c65ca0] [c01cad00] zswap_shrinker_scan+0xac/0xc4
> > [c1c65cd0] [c018052c] do_shrink_slab+0x18c/0x304
> > [c1c65d20] [c0180a40] shrink_slab+0x174/0x260
> > [c1c65da0] [c017cb0c] shrink_one+0xbc/0x134
> > [c1c65dd0] [c017e3e4] shrink_node+0x238/0x84c
> > [c1c65e50] [c017ed38] balance_pgdat+0x340/0x650
> > [c1c65f50] [c017f270] kswapd+0x228/0x25c
> > [c1c65fc0] [c006bbac] kthread+0xe4/0xe8
> > [c1c65ff0] [c0015304] start_kernel_thread+0x10/0x14
> > SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> > cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> > node 0: slabs: 15, objs: 225, free: 0
> > SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> > cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> > node 0: slabs: 15, objs: 225, free: 0
> > SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> > cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> > node 0: slabs: 15, objs: 225, free: 0
> > SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> > cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> > node 0: slabs: 15, objs: 225, free: 0
> > SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> > cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> > node 0: slabs: 15, objs: 225, free: 0
> > SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> > cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
> > kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
> > node 0: slabs: 33, objs: 165, free: 0
> > SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> > cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> > node 0: slabs: 15, objs: 225, free: 0
> > SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> > cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
> > kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
> > node 0: slabs: 33, objs: 165, free: 0
> > SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> > cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> > node 0: slabs: 15, objs: 225, free: 0
> > SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> > cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
> > kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
> > node 0: slabs: 33, objs: 165, free: 0
> > Mem-Info:
> > active_anon:340071 inactive_anon:139179 isolated_anon:0
> > active_file:8297 inactive_file:2506 isolated_file:0
> > unevictable:4 dirty:1 writeback:18
> > slab_reclaimable:1377 slab_unreclaimable:7426
> > mapped:6804 shmem:112 pagetables:946
> > sec_pagetables:0 bounce:0
> > kernel_misc_reclaimable:0
> > free:1141 free_pcp:7 free_cma:0
> > Node 0 active_anon:1360284kB inactive_anon:556716kB active_file:33188kB inactive_file:10024kB unevictable:16kB isolated(anon):0kB isolated(file):0kB mapped:27216kB dirty:4kB writeback:72kB shmem:448kB writeback_tmp:0kB kernel_stack:1560kB pagetables:3784kB sec_pagetables:0kB all_unreclaimable? no
> > DMA free:56kB boost:7756kB min:11208kB low:12068kB high:12928kB reserved_highatomic:0KB active_anon:635128kB inactive_anon:58260kB active_file:268kB inactive_file:3000kB unevictable:0kB writepending:324kB present:786432kB managed:746644kB mlocked:0kB bounce:0kB free_pcp:28kB local_pcp:28kB free_cma:0kB
> > lowmem_reserve[]: 0 0 1280 1280
> > DMA: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 0kB
> > 63943 total pagecache pages
> > 53024 pages in swap cache
> > Free swap = 8057248kB
> > Total swap = 8388604kB
> > 524288 pages RAM
> > 327680 pages HighMem/MovableOnly
> > 9947 pages reserved
> > warn_alloc: 396 callbacks suppressed
> > kswapd0: page allocation failure: order:0, mode:0xcc0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0
> > CPU: 1 PID: 41 Comm: kswapd0 Not tainted 6.9.0-gentoo-PMacG4 #1
> > Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
> > Call Trace:
> > [c1c65940] [c07926d4] dump_stack_lvl+0x80/0xac (unreliable)
> > [c1c65960] [c01b6234] warn_alloc+0x100/0x178
> > [c1c659c0] [c01b661c] __alloc_pages+0x370/0x8d0
> > [c1c65a80] [c01c4854] __read_swap_cache_async+0xc0/0x1cc
> > [c1c65ad0] [c01cb580] zswap_writeback_entry+0x50/0x154
> > [c1c65be0] [c01cb6f4] shrink_memcg_cb+0x70/0xec
> > [c1c65c10] [c019518c] __list_lru_walk_one+0xa0/0x154
> > [c1c65c70] [c01952a4] list_lru_walk_one+0x64/0x7c
> > [c1c65ca0] [c01cad00] zswap_shrinker_scan+0xac/0xc4
> > [c1c65cd0] [c018052c] do_shrink_slab+0x18c/0x304
> > [c1c65d20] [c0180a40] shrink_slab+0x174/0x260
> > [c1c65da0] [c017cb0c] shrink_one+0xbc/0x134
> > [c1c65dd0] [c017e3e4] shrink_node+0x238/0x84c
> > [c1c65e50] [c017ed38] balance_pgdat+0x340/0x650
> > [c1c65f50] [c017f270] kswapd+0x228/0x25c
> > slab_out_of_memory: 53 callbacks suppressed
> > SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> > cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> > node 0: slabs: 18, objs: 270, free: 0
> > SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> > cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> > node 0: slabs: 18, objs: 270, free: 0
> > SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> > cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> > node 0: slabs: 18, objs: 270, free: 0
> > SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> > cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> > node 0: slabs: 18, objs: 270, free: 0
> > SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> > cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> > node 0: slabs: 18, objs: 270, free: 0
> > SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> > cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
> > kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
> > node 0: slabs: 33, objs: 165, free: 0
> > SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> > cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> > node 0: slabs: 18, objs: 270, free: 0
> > SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> > cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
> > kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
> > node 0: slabs: 33, objs: 165, free: 0
> > SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> > cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> > node 0: slabs: 18, objs: 270, free: 0
> > SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> > cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
> > kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
> > node 0: slabs: 33, objs: 165, free: 0
> > [c1c65fc0] [c006bbac] kthread+0xe4/0xe8
> > [c1c65ff0] [c0015304] start_kernel_thread+0x10/0x14
> > Mem-Info:
> > active_anon:351976 inactive_anon:123514 isolated_anon:0
> > active_file:4648 inactive_file:2081 isolated_file:0
> > unevictable:4 dirty:1 writeback:39
> > slab_reclaimable:918 slab_unreclaimable:7222
> > mapped:5359 shmem:21 pagetables:940
> > sec_pagetables:0 bounce:0
> > kernel_misc_reclaimable:0
> > free:2563 free_pcp:142 free_cma:0
> > Node 0 active_anon:1407904kB inactive_anon:494056kB active_file:18592kB inactive_file:8324kB unevictable:16kB isolated(anon):0kB isolated(file):0kB mapped:21436kB dirty:4kB writeback:156kB shmem:84kB writeback_tmp:0kB kernel_stack:1552kB pagetables:3760kB sec_pagetables:0kB all_unreclaimable? no
> > DMA free:0kB boost:7756kB min:11208kB low:12068kB high:12928kB reserved_highatomic:0KB active_anon:199336kB inactive_anon:491432kB active_file:4612kB inactive_file:5980kB unevictable:0kB writepending:660kB present:786432kB managed:746644kB mlocked:0kB bounce:0kB free_pcp:568kB local_pcp:20kB free_cma:0kB
> > lowmem_reserve[]: 0 0 1280 1280
> > DMA: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 0kB
> > 45961 total pagecache pages
> > 39207 pages in swap cache
> > Free swap = 8093096kB
> > Total swap = 8388604kB
> > 524288 pages RAM
> > 327680 pages HighMem/MovableOnly
> > 9947 pages reserved
> > warn_alloc: 343 callbacks suppressed
> > kswapd0: page allocation failure: order:0, mode:0xcc0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0
> > CPU: 0 PID: 41 Comm: kswapd0 Not tainted 6.9.0-gentoo-PMacG4 #1
> > Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
> > Call Trace:
> > [c1c65940] [c07926d4] dump_stack_lvl+0x80/0xac (unreliable)
> > [c1c65960] [c01b6234] warn_alloc+0x100/0x178
> > [c1c659c0] [c01b661c] __alloc_pages+0x370/0x8d0
> > [c1c65a80] [c01c4854] __read_swap_cache_async+0xc0/0x1cc
> > [c1c65ad0] [c01cb580] zswap_writeback_entry+0x50/0x154
> > [c1c65be0] [c01cb6f4] shrink_memcg_cb+0x70/0xec
> > [c1c65c10] [c019518c] __list_lru_walk_one+0xa0/0x154
> > slab_out_of_memory: 59 callbacks suppressed
> > SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> > cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> > node 0: slabs: 18, objs: 270, free: 0
> > SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> > cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> > node 0: slabs: 18, objs: 270, free: 0
> > SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> > cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> > node 0: slabs: 18, objs: 270, free: 0
> > SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> > cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> > node 0: slabs: 18, objs: 270, free: 0
> > SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> > cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> > node 0: slabs: 18, objs: 270, free: 0
> > SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> > cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
> > kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
> > node 0: slabs: 33, objs: 165, free: 0
> > SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> > cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> > node 0: slabs: 18, objs: 270, free: 0
> > SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> > cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
> > kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
> > node 0: slabs: 33, objs: 165, free: 0
> > SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> > cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
> > node 0: slabs: 18, objs: 270, free: 0
> > SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
> > cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
> > kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
> > node 0: slabs: 33, objs: 165, free: 0
> > [c1c65c70] [c01952a4] list_lru_walk_one+0x64/0x7c
> > [c1c65ca0] [c01cad00] zswap_shrinker_scan+0xac/0xc4
> > [c1c65cd0] [c018052c] do_shrink_slab+0x18c/0x304
> > [c1c65d20] [c0180a40] shrink_slab+0x174/0x260
> > [c1c65da0] [c017cb0c] shrink_one+0xbc/0x134
> > [c1c65dd0] [c017e3e4] shrink_node+0x238/0x84c
> > [c1c65e50] [c017ed38] balance_pgdat+0x340/0x650
> > [c1c65f50] [c017f270] kswapd+0x228/0x25c
> > [c1c65fc0] [c006bbac] kthread+0xe4/0xe8
> > [c1c65ff0] [c0015304] start_kernel_thread+0x10/0x14
> > Mem-Info:
> > active_anon:235002 inactive_anon:240975 isolated_anon:0
> > active_file:4356 inactive_file:2551 isolated_file:0
> > unevictable:4 dirty:7 writeback:19
> > slab_reclaimable:1008 slab_unreclaimable:7218
> > mapped:5601 shmem:21 pagetables:939
> > sec_pagetables:0 bounce:0
> > kernel_misc_reclaimable:0
> > free:1340 free_pcp:23 free_cma:0
> > Node 0 active_anon:940008kB inactive_anon:963900kB active_file:17424kB inactive_file:10204kB unevictable:16kB isolated(anon):0kB isolated(file):0kB mapped:22404kB dirty:28kB writeback:76kB shmem:84kB writeback_tmp:0kB kernel_stack:1552kB pagetables:3756kB sec_pagetables:0kB all_unreclaimable? no
> > DMA free:0kB boost:7756kB min:11208kB low:12068kB high:12928kB reserved_highatomic:0KB active_anon:644060kB inactive_anon:36332kB active_file:5276kB inactive_file:5516kB unevictable:0kB writepending:348kB present:786432kB managed:746644kB mlocked:0kB bounce:0kB free_pcp:92kB local_pcp:92kB free_cma:0kB
> > lowmem_reserve[]: 0 0 1280 1280
> > DMA: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 0kB
> > 116345 total pagecache pages
> > 109413 pages in swap cache
> > Free swap = 7819300kB
> > Total swap = 8388604kB
> > 524288 pages RAM
> > 327680 pages HighMem/MovableOnly
> > 9947 pages reserved
> >
> >
> > I switched from zstd to lzo as zswap default compressor so zstd does not show up on the dmesg. But the rest looks pretty similar.
> >
> > Full dmesg and kernel .config attached.
> >
> > Regards,
> > Erhard
>
> Hi Erhard,
>
> Thanks for the reports. I'll take a look at them and get back to you
> in a few days.
Hi Erhard,
The OOM kills on both kernel versions seem to be reasonable to me.
Your system has 2GB memory and it uses zswap with zsmalloc (which is
good since it can allocate from the highmem zone) and zstd/lzo (which
doesn't matter much). Somehow -- I couldn't figure out why -- it
splits the 2GB into a 0.25GB DMA zone and a 1.75GB highmem zone:
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
[ 0.000000] Normal empty
[ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff]
The kernel can't allocate from the highmem zone -- only userspace and
zsmalloc can. OOM kills were due to the low memory conditions in the
DMA zone where the kernel itself failed to allocate from.
Do you know a kernel version that doesn't have OOM kills while running
the same workload? If so, could you send that .config to me? If not,
could you try disabling CONFIG_HIGHMEM? (It might not help but I'm out
of ideas at the moment.)
Thanks!
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-01 6:01 ` Yu Zhao
@ 2024-06-01 15:37 ` David Hildenbrand
2024-06-06 3:11 ` Michael Ellerman
2024-06-02 18:03 ` Erhard Furtner
1 sibling, 1 reply; 45+ messages in thread
From: David Hildenbrand @ 2024-06-01 15:37 UTC (permalink / raw)
To: Yu Zhao, Erhard Furtner; +Cc: linux-mm, linux-kernel, linuxppc-dev
On 01.06.24 08:01, Yu Zhao wrote:
> On Wed, May 15, 2024 at 4:06 PM Yu Zhao <yuzhao@google.com> wrote:
>>
>> On Wed, May 15, 2024 at 2:45 PM Erhard Furtner <erhard_f@mailbox.org> wrote:
>>>
>>> On Wed, 8 May 2024 20:21:11 +0200
>>> Erhard Furtner <erhard_f@mailbox.org> wrote:
>>>
>>>> Greetings!
>>>>
>>>> Got that on my dual CPU PowerMac G4 DP shortly after boot. This does not happen every time at bootup though:
>>>>
>>>> [...]
>>>> kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0
>>>> CPU: 1 PID: 40 Comm: kswapd0 Not tainted 6.8.9-gentoo-PMacG4 #1
>>>> Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
>>>
>>> Very similar page allocation failure on the same machine on kernel 6.9.0 too. Seems it can easily be provoked by running a memory stressor, e.g. "stress-ng --vm 2 --vm-bytes 1930M --verify -v":
>>>
>>> [...]
>>> kswapd0: page allocation failure: order:0, mode:0xcc0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0
>>> CPU: 0 PID: 41 Comm: kswapd0 Not tainted 6.9.0-gentoo-PMacG4 #1
>>> Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
>>> Call Trace:
>>> [c1c65940] [c07926d4] dump_stack_lvl+0x80/0xac (unreliable)
>>> [c1c65960] [c01b6234] warn_alloc+0x100/0x178
>>> [c1c659c0] [c01b661c] __alloc_pages+0x370/0x8d0
>>> [c1c65a80] [c01c4854] __read_swap_cache_async+0xc0/0x1cc
>>> [c1c65ad0] [c01cb580] zswap_writeback_entry+0x50/0x154
>>> [c1c65be0] [c01cb6f4] shrink_memcg_cb+0x70/0xec
>>> [c1c65c10] [c019518c] __list_lru_walk_one+0xa0/0x154
>>> [c1c65c70] [c01952a4] list_lru_walk_one+0x64/0x7c
>>> [c1c65ca0] [c01cad00] zswap_shrinker_scan+0xac/0xc4
>>> [c1c65cd0] [c018052c] do_shrink_slab+0x18c/0x304
>>> [c1c65d20] [c0180a40] shrink_slab+0x174/0x260
>>> [c1c65da0] [c017cb0c] shrink_one+0xbc/0x134
>>> [c1c65dd0] [c017e3e4] shrink_node+0x238/0x84c
>>> [c1c65e50] [c017ed38] balance_pgdat+0x340/0x650
>>> [c1c65f50] [c017f270] kswapd+0x228/0x25c
>>> [c1c65fc0] [c006bbac] kthread+0xe4/0xe8
>>> [c1c65ff0] [c0015304] start_kernel_thread+0x10/0x14
>>> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
>>> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
>>> node 0: slabs: 15, objs: 225, free: 0
>>> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
>>> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
>>> node 0: slabs: 15, objs: 225, free: 0
>>> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
>>> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
>>> node 0: slabs: 15, objs: 225, free: 0
>>> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
>>> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
>>> node 0: slabs: 15, objs: 225, free: 0
>>> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
>>> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
>>> node 0: slabs: 15, objs: 225, free: 0
>>> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
>>> cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
>>> kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
>>> node 0: slabs: 33, objs: 165, free: 0
>>> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
>>> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
>>> node 0: slabs: 15, objs: 225, free: 0
>>> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
>>> cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
>>> kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
>>> node 0: slabs: 33, objs: 165, free: 0
>>> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
>>> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
>>> node 0: slabs: 15, objs: 225, free: 0
>>> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
>>> cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
>>> kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
>>> node 0: slabs: 33, objs: 165, free: 0
>>> Mem-Info:
>>> active_anon:340071 inactive_anon:139179 isolated_anon:0
>>> active_file:8297 inactive_file:2506 isolated_file:0
>>> unevictable:4 dirty:1 writeback:18
>>> slab_reclaimable:1377 slab_unreclaimable:7426
>>> mapped:6804 shmem:112 pagetables:946
>>> sec_pagetables:0 bounce:0
>>> kernel_misc_reclaimable:0
>>> free:1141 free_pcp:7 free_cma:0
>>> Node 0 active_anon:1360284kB inactive_anon:556716kB active_file:33188kB inactive_file:10024kB unevictable:16kB isolated(anon):0kB isolated(file):0kB mapped:27216kB dirty:4kB writeback:72kB shmem:448kB writeback_tmp:0kB kernel_stack:1560kB pagetables:3784kB sec_pagetables:0kB all_unreclaimable? no
>>> DMA free:56kB boost:7756kB min:11208kB low:12068kB high:12928kB reserved_highatomic:0KB active_anon:635128kB inactive_anon:58260kB active_file:268kB inactive_file:3000kB unevictable:0kB writepending:324kB present:786432kB managed:746644kB mlocked:0kB bounce:0kB free_pcp:28kB local_pcp:28kB free_cma:0kB
>>> lowmem_reserve[]: 0 0 1280 1280
>>> DMA: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 0kB
>>> 63943 total pagecache pages
>>> 53024 pages in swap cache
>>> Free swap = 8057248kB
>>> Total swap = 8388604kB
>>> 524288 pages RAM
>>> 327680 pages HighMem/MovableOnly
>>> 9947 pages reserved
>>> warn_alloc: 396 callbacks suppressed
>>> kswapd0: page allocation failure: order:0, mode:0xcc0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0
>>> CPU: 1 PID: 41 Comm: kswapd0 Not tainted 6.9.0-gentoo-PMacG4 #1
>>> Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
>>> Call Trace:
>>> [c1c65940] [c07926d4] dump_stack_lvl+0x80/0xac (unreliable)
>>> [c1c65960] [c01b6234] warn_alloc+0x100/0x178
>>> [c1c659c0] [c01b661c] __alloc_pages+0x370/0x8d0
>>> [c1c65a80] [c01c4854] __read_swap_cache_async+0xc0/0x1cc
>>> [c1c65ad0] [c01cb580] zswap_writeback_entry+0x50/0x154
>>> [c1c65be0] [c01cb6f4] shrink_memcg_cb+0x70/0xec
>>> [c1c65c10] [c019518c] __list_lru_walk_one+0xa0/0x154
>>> [c1c65c70] [c01952a4] list_lru_walk_one+0x64/0x7c
>>> [c1c65ca0] [c01cad00] zswap_shrinker_scan+0xac/0xc4
>>> [c1c65cd0] [c018052c] do_shrink_slab+0x18c/0x304
>>> [c1c65d20] [c0180a40] shrink_slab+0x174/0x260
>>> [c1c65da0] [c017cb0c] shrink_one+0xbc/0x134
>>> [c1c65dd0] [c017e3e4] shrink_node+0x238/0x84c
>>> [c1c65e50] [c017ed38] balance_pgdat+0x340/0x650
>>> [c1c65f50] [c017f270] kswapd+0x228/0x25c
>>> slab_out_of_memory: 53 callbacks suppressed
>>> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
>>> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
>>> node 0: slabs: 18, objs: 270, free: 0
>>> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
>>> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
>>> node 0: slabs: 18, objs: 270, free: 0
>>> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
>>> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
>>> node 0: slabs: 18, objs: 270, free: 0
>>> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
>>> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
>>> node 0: slabs: 18, objs: 270, free: 0
>>> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
>>> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
>>> node 0: slabs: 18, objs: 270, free: 0
>>> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
>>> cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
>>> kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
>>> node 0: slabs: 33, objs: 165, free: 0
>>> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
>>> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
>>> node 0: slabs: 18, objs: 270, free: 0
>>> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
>>> cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
>>> kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
>>> node 0: slabs: 33, objs: 165, free: 0
>>> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
>>> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
>>> node 0: slabs: 18, objs: 270, free: 0
>>> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
>>> cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
>>> kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
>>> node 0: slabs: 33, objs: 165, free: 0
>>> [c1c65fc0] [c006bbac] kthread+0xe4/0xe8
>>> [c1c65ff0] [c0015304] start_kernel_thread+0x10/0x14
>>> Mem-Info:
>>> active_anon:351976 inactive_anon:123514 isolated_anon:0
>>> active_file:4648 inactive_file:2081 isolated_file:0
>>> unevictable:4 dirty:1 writeback:39
>>> slab_reclaimable:918 slab_unreclaimable:7222
>>> mapped:5359 shmem:21 pagetables:940
>>> sec_pagetables:0 bounce:0
>>> kernel_misc_reclaimable:0
>>> free:2563 free_pcp:142 free_cma:0
>>> Node 0 active_anon:1407904kB inactive_anon:494056kB active_file:18592kB inactive_file:8324kB unevictable:16kB isolated(anon):0kB isolated(file):0kB mapped:21436kB dirty:4kB writeback:156kB shmem:84kB writeback_tmp:0kB kernel_stack:1552kB pagetables:3760kB sec_pagetables:0kB all_unreclaimable? no
>>> DMA free:0kB boost:7756kB min:11208kB low:12068kB high:12928kB reserved_highatomic:0KB active_anon:199336kB inactive_anon:491432kB active_file:4612kB inactive_file:5980kB unevictable:0kB writepending:660kB present:786432kB managed:746644kB mlocked:0kB bounce:0kB free_pcp:568kB local_pcp:20kB free_cma:0kB
>>> lowmem_reserve[]: 0 0 1280 1280
>>> DMA: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 0kB
>>> 45961 total pagecache pages
>>> 39207 pages in swap cache
>>> Free swap = 8093096kB
>>> Total swap = 8388604kB
>>> 524288 pages RAM
>>> 327680 pages HighMem/MovableOnly
>>> 9947 pages reserved
>>> warn_alloc: 343 callbacks suppressed
>>> kswapd0: page allocation failure: order:0, mode:0xcc0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0
>>> CPU: 0 PID: 41 Comm: kswapd0 Not tainted 6.9.0-gentoo-PMacG4 #1
>>> Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
>>> Call Trace:
>>> [c1c65940] [c07926d4] dump_stack_lvl+0x80/0xac (unreliable)
>>> [c1c65960] [c01b6234] warn_alloc+0x100/0x178
>>> [c1c659c0] [c01b661c] __alloc_pages+0x370/0x8d0
>>> [c1c65a80] [c01c4854] __read_swap_cache_async+0xc0/0x1cc
>>> [c1c65ad0] [c01cb580] zswap_writeback_entry+0x50/0x154
>>> [c1c65be0] [c01cb6f4] shrink_memcg_cb+0x70/0xec
>>> [c1c65c10] [c019518c] __list_lru_walk_one+0xa0/0x154
>>> slab_out_of_memory: 59 callbacks suppressed
>>> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
>>> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
>>> node 0: slabs: 18, objs: 270, free: 0
>>> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
>>> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
>>> node 0: slabs: 18, objs: 270, free: 0
>>> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
>>> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
>>> node 0: slabs: 18, objs: 270, free: 0
>>> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
>>> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
>>> node 0: slabs: 18, objs: 270, free: 0
>>> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
>>> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
>>> node 0: slabs: 18, objs: 270, free: 0
>>> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
>>> cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
>>> kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
>>> node 0: slabs: 33, objs: 165, free: 0
>>> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
>>> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
>>> node 0: slabs: 18, objs: 270, free: 0
>>> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
>>> cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
>>> kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
>>> node 0: slabs: 33, objs: 165, free: 0
>>> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
>>> cache: skbuff_small_head, object size: 480, buffer size: 544, default order: 1, min order: 0
>>> node 0: slabs: 18, objs: 270, free: 0
>>> SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
>>> cache: kmalloc-rnd-15-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
>>> kmalloc-rnd-15-2k debugging increased min order, use slab_debug=O to disable.
>>> node 0: slabs: 33, objs: 165, free: 0
>>> [c1c65c70] [c01952a4] list_lru_walk_one+0x64/0x7c
>>> [c1c65ca0] [c01cad00] zswap_shrinker_scan+0xac/0xc4
>>> [c1c65cd0] [c018052c] do_shrink_slab+0x18c/0x304
>>> [c1c65d20] [c0180a40] shrink_slab+0x174/0x260
>>> [c1c65da0] [c017cb0c] shrink_one+0xbc/0x134
>>> [c1c65dd0] [c017e3e4] shrink_node+0x238/0x84c
>>> [c1c65e50] [c017ed38] balance_pgdat+0x340/0x650
>>> [c1c65f50] [c017f270] kswapd+0x228/0x25c
>>> [c1c65fc0] [c006bbac] kthread+0xe4/0xe8
>>> [c1c65ff0] [c0015304] start_kernel_thread+0x10/0x14
>>> Mem-Info:
>>> active_anon:235002 inactive_anon:240975 isolated_anon:0
>>> active_file:4356 inactive_file:2551 isolated_file:0
>>> unevictable:4 dirty:7 writeback:19
>>> slab_reclaimable:1008 slab_unreclaimable:7218
>>> mapped:5601 shmem:21 pagetables:939
>>> sec_pagetables:0 bounce:0
>>> kernel_misc_reclaimable:0
>>> free:1340 free_pcp:23 free_cma:0
>>> Node 0 active_anon:940008kB inactive_anon:963900kB active_file:17424kB inactive_file:10204kB unevictable:16kB isolated(anon):0kB isolated(file):0kB mapped:22404kB dirty:28kB writeback:76kB shmem:84kB writeback_tmp:0kB kernel_stack:1552kB pagetables:3756kB sec_pagetables:0kB all_unreclaimable? no
>>> DMA free:0kB boost:7756kB min:11208kB low:12068kB high:12928kB reserved_highatomic:0KB active_anon:644060kB inactive_anon:36332kB active_file:5276kB inactive_file:5516kB unevictable:0kB writepending:348kB present:786432kB managed:746644kB mlocked:0kB bounce:0kB free_pcp:92kB local_pcp:92kB free_cma:0kB
>>> lowmem_reserve[]: 0 0 1280 1280
>>> DMA: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 0kB
>>> 116345 total pagecache pages
>>> 109413 pages in swap cache
>>> Free swap = 7819300kB
>>> Total swap = 8388604kB
>>> 524288 pages RAM
>>> 327680 pages HighMem/MovableOnly
>>> 9947 pages reserved
>>>
>>>
>>> I switched from zstd to lzo as zswap default compressor so zstd does not show up on the dmesg. But the rest looks pretty similar.
>>>
>>> Full dmesg and kernel .config attached.
>>>
>>> Regards,
>>> Erhard
>>
>> Hi Erhard,
>>
>> Thanks for the reports. I'll take a look at them and get back to you
>> in a few days.
>
> Hi Erhard,
>
> The OOM kills on both kernel versions seem to be reasonable to me.
>
> Your system has 2GB memory and it uses zswap with zsmalloc (which is
> good since it can allocate from the highmem zone) and zstd/lzo (which
> doesn't matter much). Somehow -- I couldn't figure out why -- it
> splits the 2GB into a 0.25GB DMA zone and a 1.75GB highmem zone:
>
> [ 0.000000] Zone ranges:
> [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
> [ 0.000000] Normal empty
> [ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff]
That's really odd. But we are messing with "PowerMac3,6", so I don't
really know what's right or wrong ...
--
Cheers,
David / dhildenb
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-01 6:01 ` Yu Zhao
2024-06-01 15:37 ` David Hildenbrand
@ 2024-06-02 18:03 ` Erhard Furtner
2024-06-02 20:38 ` Yu Zhao
2024-06-03 22:13 ` Erhard Furtner
1 sibling, 2 replies; 45+ messages in thread
From: Erhard Furtner @ 2024-06-02 18:03 UTC (permalink / raw)
To: Yu Zhao; +Cc: linux-mm, linux-kernel, linuxppc-dev
[-- Attachment #1: Type: text/plain, Size: 3278 bytes --]
On Sat, 1 Jun 2024 00:01:48 -0600
Yu Zhao <yuzhao@google.com> wrote:
> Hi Erhard,
>
> The OOM kills on both kernel versions seem to be reasonable to me.
>
> Your system has 2GB memory and it uses zswap with zsmalloc (which is
> good since it can allocate from the highmem zone) and zstd/lzo (which
> doesn't matter much). Somehow -- I couldn't figure out why -- it
> splits the 2GB into a 0.25GB DMA zone and a 1.75GB highmem zone:
>
> [ 0.000000] Zone ranges:
> [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
> [ 0.000000] Normal empty
> [ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff]
>
> The kernel can't allocate from the highmem zone -- only userspace and
> zsmalloc can. OOM kills were due to the low memory conditions in the
> DMA zone where the kernel itself failed to allocate from.
>
> Do you know a kernel version that doesn't have OOM kills while running
> the same workload? If so, could you send that .config to me? If not,
> could you try disabling CONFIG_HIGHMEM? (It might not help but I'm out
> of ideas at the moment.)
>
> Thanks!
Hi Yu!
Thanks for looking into this.
The reason for this 0.25GB DMA / 1.75GB highmem split is beyond my knowledge. I can only tell this much that it's like this at least since kernel v4.14.x (dmesg of an old bugreport of mine at https://bugzilla.kernel.org/show_bug.cgi?id=201723), I guess earlier kernel versions too.
Without CONFIG_HIGHMEM the memory layout looks like this:
Total memory = 768MB; using 2048kB for hash table
[...]
Top of RAM: 0x30000000, Total RAM: 0x30000000
Memory hole size: 0MB
Zone ranges:
DMA [mem 0x0000000000000000-0x000000002fffffff]
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000000000-0x000000002fffffff]
Initmem setup node 0 [mem 0x0000000000000000-0x000000002fffffff]
percpu: Embedded 29 pages/cpu s28448 r8192 d82144 u118784
pcpu-alloc: s28448 r8192 d82144 u118784 alloc=29*4096
pcpu-alloc: [0] 0 [0] 1
Kernel command line: ro root=/dev/sda5 slub_debug=FZP page_poison=1 netconsole=6666@192.168.2.8/eth0,6666@192.168.2.3/A8:A1:59:16:4F:EA debug
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
Built 1 zonelists, mobility grouping on. Total pages: 194880
mem auto-init: stack:all(pattern), heap alloc:off, heap free:off
Kernel virtual memory layout:
* 0xffbdf000..0xfffff000 : fixmap
* 0xff8f4000..0xffbdf000 : early ioremap
* 0xf1000000..0xff8f4000 : vmalloc & ioremap
* 0xb0000000..0xc0000000 : modules
Memory: 761868K/786432K available (7760K kernel code, 524K rwdata, 4528K rodata, 1100K init, 253K bss, 24564K reserved, 0K cma-reserved)
[...]
With only 768 MB RAM and 2048K hashtable I get pretty much the same "kswapd0: page allocation failure: order:0, mode:0xcc0(GFP_KERNEL),nodemask=(null),cpuset=/,mems_allowed=0" as with the HIGHMEM enabled kernel at
running "stress-ng --vm 2 --vm-bytes 1930M --verify -v".
I tried the workload on v6.6.32 LTS where the issue shows up too. But v6.1.92 LTS seems ok! Triple checked v6.1.92 to be sure.
Attached please find kernel v6.9.3 dmesg (without HIGHMEM) and kernel v6.1.92 .config.
Regards,
Erhard
[-- Attachment #2: dmesg_693_g4_highmem-disabled --]
[-- Type: application/octet-stream, Size: 51278 bytes --]
[ 0.000000] Total memory = 768MB; using 2048kB for hash table
[ 0.000000] Activating Kernel Userspace Access Protection
[ 0.000000] Activating Kernel Userspace Execution Prevention
[ 0.000000] Linux version 6.9.3-gentoo-PMacG4 (root@T1000) (gcc (Gentoo 13.2.1_p20240210 p14) 13.2.1 20240210, GNU ld (Gentoo 2.42 p3) 2.42.0) #4 SMP Sun Jun 2 17:48:47 CEST 2024
[ 0.000000] ioremap() called early from pmac_feature_init+0x254/0xa7c. Use early_ioremap() instead
[ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0x24
[ 0.000000] Mapped at 0xffb9e000
[ 0.000000] ioremap() called early from probe_one_macio+0x150/0x238. Use early_ioremap() instead
[ 0.000000] Found a Keylargo mac-io controller, rev: 3, mapped at 0x(ptrval)
[ 0.000000] PowerMac motherboard: PowerMac G4 Windtunnel
[ 0.000000] ioremap() called early from btext_map+0x5c/0x7c. Use early_ioremap() instead
[ 0.000000] Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
[ 0.000000] printk: legacy bootconsole [udbg0] enabled
[ 0.000000] CPU maps initialized for 1 thread per core
[ 0.000000] (thread shift is 0)
[ 0.000000] -----------------------------------------------------
[ 0.000000] phys_mem_size = 0x30000000
[ 0.000000] dcache_bsize = 0x20
[ 0.000000] icache_bsize = 0x20
[ 0.000000] cpu_features = 0x000000002514600a
[ 0.000000] possible = 0x00000000277de00a
[ 0.000000] always = 0x0000000001000000
[ 0.000000] cpu_user_features = 0x9c000001 0x00000000
[ 0.000000] mmu_features = 0x00010201
[ 0.000000] Hash_size = 0x200000
[ 0.000000] Hash_mask = 0x7fff
[ 0.000000] -----------------------------------------------------
[ 0.000000] ioremap() called early from pmac_setup_arch+0xd0/0x228. Use early_ioremap() instead
[ 0.000000] ioremap() called early from find_via_pmu+0x220/0x288. Use early_ioremap() instead
[ 0.000000] ioremap() called early from find_via_pmu+0xd4/0x288. Use early_ioremap() instead
[ 0.000000] via-pmu: Server Mode is disabled
[ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c
[ 0.000000] ioremap() called early from pmac_nvram_init+0x284/0x518. Use early_ioremap() instead
[ 0.000000] nvram: Checking bank 0...
[ 0.000000] nvram: gen0=3427, gen1=3428
[ 0.000000] nvram: Active bank is: 1
[ 0.000000] nvram: OF partition at 0x410
[ 0.000000] nvram: XP partition at 0x1020
[ 0.000000] nvram: NR partition at 0x1120
[ 0.000000] Top of RAM: 0x30000000, Total RAM: 0x30000000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000002fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000002fffffff]
[ 0.000000] percpu: Embedded 29 pages/cpu s28448 r8192 d82144 u118784
[ 0.000000] pcpu-alloc: s28448 r8192 d82144 u118784 alloc=29*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Kernel command line: ro root=/dev/sda5 slub_debug=FZP page_poison=1 netconsole=6666@192.168.2.8/eth0,6666@192.168.2.3/A8:A1:59:16:4F:EA debug
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 194880
[ 0.000000] mem auto-init: stack:all(pattern), heap alloc:off, heap free:off
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xffbdf000..0xfffff000 : fixmap
[ 0.000000] * 0xff8f4000..0xffbdf000 : early ioremap
[ 0.000000] * 0xf1000000..0xff8f4000 : vmalloc & ioremap
[ 0.000000] * 0xb0000000..0xc0000000 : modules
[ 0.000000] Memory: 761868K/786432K available (7760K kernel code, 524K rwdata, 4528K rodata, 1100K init, 253K bss, 24564K reserved, 0K cma-reserved)
[ 0.000000] **********************************************************
[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.000000] ** **
[ 0.000000] ** This system shows unhashed kernel memory addresses **
[ 0.000000] ** via the console, logs, and other interfaces. This **
[ 0.000000] ** might reduce the security of your system. **
[ 0.000000] ** **
[ 0.000000] ** If you see this message and you are not debugging **
[ 0.000000] ** the kernel, report this immediately to your system **
[ 0.000000] ** administrator! **
[ 0.000000] ** **
[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.000000] **********************************************************
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
[ 0.000000] mpic: Resetting
[ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 2 CPUs
[ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f
[ 0.000000] mpic: Initializing for 64 sources
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] time_init: decrementer frequency = 41.658765 MHz
[ 0.000000] time_init: processor frequency = 1416.666661 MHz
[ 0.000006] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x99b97f1da, max_idle_ns: 440795202966 ns
[ 0.000556] clocksource: timebase mult[18012a56] shift[24] registered
[ 0.001053] clockevent: decrementer mult[aaa2619] shift[32] cpu[0]
[ 0.002455] Console: colour dummy device 80x25
[ 0.002922] printk: legacy console [tty0] enabled
[ 0.003382] printk: legacy bootconsole [udbg0] disabled
[ 0.003885] pid_max: default: 32768 minimum: 301
[ 0.006734] LSM: initializing lsm=capability,yama
[ 0.006812] Yama: becoming mindful.
[ 0.007613] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.007664] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.014631] PowerMac SMP probe found 2 cpus
[ 0.015063] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
[ 0.015259] channel 0 bus <multibus>
[ 0.015279] channel 1 bus <multibus>
[ 0.015395] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
[ 0.015436] channel 0 bus <multibus>
[ 0.015496] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c
[ 0.015685] channel 1 bus <multibus>
[ 0.015704] channel 2 bus <multibus>
[ 0.015761] pmf: no parser for command 17 !
[ 0.015830] Processor timebase sync using GPIO 0x73
[ 0.015843] mpic: requesting IPIs...
[ 0.015948] CPU0: L2CR is 80000000
[ 0.015962] CPU0: L3CR is 9c030000
[ 0.017686] MPC7450 family performance monitor hardware support registered
[ 0.017934] rcu: Hierarchical SRCU implementation.
[ 0.017960] rcu: Max phase no-delay instances is 1000.
[ 0.018927] smp: Bringing up secondary CPUs ...
[83973668.985407] CPU1: L2CR was 0
[83973668.985466] CPU1: L2CR set to 80000000
[83973668.985472] CPU1: L3CR was 0
[83973668.985619] CPU1: L3CR set to 9c030000
[ 0.022188] smp: Brought up 1 node, 2 CPUs
[ 0.024850] devtmpfs: initialized
[ 0.025663] Duplicate name in PowerPC,G4@0, renamed to "l2-cache#1"
[ 0.025794] Duplicate name in l2-cache#1, renamed to "l2-cache#1"
[ 0.026237] Duplicate name in PowerPC,G4@1, renamed to "l2-cache#1"
[ 0.026396] Duplicate name in l2-cache#1, renamed to "l2-cache#1"
[ 0.032015] Duplicate name in gpio@50, renamed to "gpio5@6f#1"
[ 0.032118] Duplicate name in gpio@50, renamed to "gpio6@70#1"
[ 0.032286] Duplicate name in gpio@50, renamed to "gpio11@75#1"
[ 0.032446] Duplicate name in gpio@50, renamed to "extint-gpio15@67#1"
[ 0.039793] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0
[ 0.039842] PCI host bridge /pci@f0000000 ranges:
[ 0.039882] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000
[ 0.039911] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
[ 0.040046] MEM 0x0000000090000000..0x00000000afffffff -> 0x0000000090000000
[ 0.040105] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0
[ 0.040128] PCI host bridge /pci@f2000000 (primary) ranges:
[ 0.040159] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000
[ 0.040187] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000
[ 0.040307] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000
[ 0.040370] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0
[ 0.040393] PCI host bridge /pci@f4000000 ranges:
[ 0.040422] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000
[ 0.040447] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000
[ 0.040655] Found NEC PD720100A USB2 chip with disabled EHCI, fixing up...
[ 0.041168] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.041262] futex hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.044730] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.051777] PCI: Probing PCI hardware
[ 0.052545] PCI host bridge to bus 0000:00
[ 0.052579] pci_bus 0000:00: root bus resource [io 0xff780000-0xfff7ffff] (bus address [0x0000-0x7fffff])
[ 0.052610] pci_bus 0000:00: root bus resource [mem 0xf1000000-0xf1ffffff]
[ 0.052631] pci_bus 0000:00: root bus resource [mem 0x90000000-0xafffffff]
[ 0.052656] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.052677] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.053210] pci 0000:00:0b.0: [106b:0034] type 00 class 0x060000 conventional PCI endpoint
[ 0.053812] pci 0000:00:10.0: [1002:4150] type 00 class 0x030000 conventional PCI endpoint
[ 0.053859] pci 0000:00:10.0: BAR 0 [mem 0xa0000000-0xafffffff pref]
[ 0.053884] pci 0000:00:10.0: BAR 1 [io 0xff780400-0xff7804ff]
[ 0.053909] pci 0000:00:10.0: BAR 2 [mem 0x90000000-0x9000ffff]
[ 0.053949] pci 0000:00:10.0: ROM [mem 0x90020000-0x9003ffff pref]
[ 0.054005] pci 0000:00:10.0: supports D1 D2
[ 0.054833] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.055703] OF: /pci@f2000000/mac-io@17/gpio@50/gpio5@6f: could not find phandle 1751474532
[ 0.055781] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio15@67: could not find phandle 1751474532
[ 0.055861] OF: /pci@f2000000/mac-io@17/gpio@50/gpio6@70: could not find phandle 1634562093
[ 0.055934] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio16@68: could not find phandle 1936745825
[ 0.056016] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio14@66: could not find phandle 1818848869
[ 0.056095] OF: /pci@f2000000/mac-io@17/gpio@50/gpio12@76: could not find phandle 1835103092
[ 0.056164] OF: /pci@f2000000/mac-io@17/gpio@50/gpio11@75: could not find phandle 1635083369
[ 0.056228] OF: /pci@f2000000/mac-io@17/gpio@50/gpio5@6f: could not find phandle 1751474532
[ 0.056292] OF: /pci@f2000000/mac-io@17/gpio@50/gpio6@70: could not find phandle 1634562093
[ 0.056356] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio4@5c: could not find phandle 1818848869
[ 0.056434] OF: /pci@f2000000/mac-io@17/gpio@50/gpio11@75: could not find phandle 1635083369
[ 0.056500] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio15@67: could not find phandle 1751474532
[ 0.057980] pci_bus 0001:00: Fixed dependency cycle(s) with /pci@f2000000/mac-io@17/interrupt-controller@40000
[ 0.058097] PCI host bridge to bus 0001:00
[ 0.058116] pci_bus 0001:00: root bus resource [io 0x0000-0x7fffff]
[ 0.058139] pci_bus 0001:00: root bus resource [mem 0xf3000000-0xf3ffffff]
[ 0.058160] pci_bus 0001:00: root bus resource [mem 0x80000000-0x8fffffff]
[ 0.058183] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.058203] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.058718] pci 0001:00:0b.0: [106b:0035] type 00 class 0x060000 conventional PCI endpoint
[ 0.059326] pci 0001:00:12.0: [1033:0035] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.059370] pci 0001:00:12.0: BAR 0 [mem 0x8008c000-0x8008cfff]
[ 0.059449] pci 0001:00:12.0: supports D1 D2
[ 0.059466] pci 0001:00:12.0: PME# supported from D0 D1 D2 D3hot
[ 0.059976] pci 0001:00:12.1: [1033:0035] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.060019] pci 0001:00:12.1: BAR 0 [mem 0x8008b000-0x8008bfff]
[ 0.060097] pci 0001:00:12.1: supports D1 D2
[ 0.060113] pci 0001:00:12.1: PME# supported from D0 D1 D2 D3hot
[ 0.060434] pci 0001:00:12.2: [1033:00e0] type 00 class 0x0c0320 conventional PCI endpoint
[ 0.060475] pci 0001:00:12.2: BAR 0 [mem 0x80081000-0x800810ff]
[ 0.060552] pci 0001:00:12.2: supports D1 D2
[ 0.060569] pci 0001:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.060888] pci 0001:00:13.0: [1095:3112] type 00 class 0x018000 conventional PCI endpoint
[ 0.060927] pci 0001:00:13.0: BAR 0 [io 0x0460-0x0467]
[ 0.060950] pci 0001:00:13.0: BAR 1 [io 0x0450-0x0453]
[ 0.060972] pci 0001:00:13.0: BAR 2 [io 0x0440-0x0447]
[ 0.060994] pci 0001:00:13.0: BAR 3 [io 0x0430-0x0433]
[ 0.061016] pci 0001:00:13.0: BAR 4 [io 0x0420-0x042f]
[ 0.061039] pci 0001:00:13.0: BAR 5 [mem 0x80082000-0x800821ff]
[ 0.061062] pci 0001:00:13.0: ROM [mem 0x80100000-0x8017ffff pref]
[ 0.061111] pci 0001:00:13.0: supports D1 D2
[ 0.061480] pci 0001:00:15.0: [9710:9865] type 00 class 0x070002 conventional PCI endpoint
[ 0.061522] pci 0001:00:15.0: BAR 0 [io 0x0410-0x0417]
[ 0.061545] pci 0001:00:15.0: BAR 1 [mem 0x8008a000-0x8008afff]
[ 0.061578] pci 0001:00:15.0: BAR 4 [mem 0x80089000-0x80089fff]
[ 0.061678] pci 0001:00:15.0: supports D1 D2
[ 0.061697] pci 0001:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.062038] pci 0001:00:15.1: [9710:9865] type 00 class 0x070002 conventional PCI endpoint
[ 0.062080] pci 0001:00:15.1: BAR 0 [io 0x0400-0x0407]
[ 0.062103] pci 0001:00:15.1: BAR 1 [mem 0x80088000-0x80088fff]
[ 0.062136] pci 0001:00:15.1: BAR 4 [mem 0x80087000-0x80087fff]
[ 0.062197] pci 0001:00:15.1: supports D1 D2
[ 0.062214] pci 0001:00:15.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.062728] pci 0001:00:15.2: [ffff:9865] type 00 class 0x070103 conventional PCI endpoint
[ 0.062772] pci 0001:00:15.2: BAR 0 [io 0x0000-0x0007]
[ 0.062795] pci 0001:00:15.2: BAR 1 [io 0x0000-0x0007]
[ 0.062817] pci 0001:00:15.2: BAR 2 [mem 0x00000000-0x00000fff]
[ 0.062845] pci 0001:00:15.2: BAR 4 [mem 0x00000000-0x00000fff]
[ 0.062906] pci 0001:00:15.2: supports D1 D2
[ 0.062923] pci 0001:00:15.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.063238] pci 0001:00:16.0: [14e4:4320] type 00 class 0x028000 conventional PCI endpoint
[ 0.063278] pci 0001:00:16.0: BAR 0 [mem 0x8008e000-0x8008ffff]
[ 0.063353] pci 0001:00:16.0: supports D1 D2
[ 0.063369] pci 0001:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.063672] pci 0001:00:17.0: [106b:0022] type 00 class 0xff0000 conventional PCI endpoint
[ 0.063711] pci 0001:00:17.0: BAR 0 [mem 0x80000000-0x8007ffff]
[ 0.064177] pci 0001:00:18.0: [106b:0019] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.064218] pci 0001:00:18.0: BAR 0 [mem 0x80086000-0x80086fff]
[ 0.064547] pci 0001:00:19.0: [106b:0019] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.064587] pci 0001:00:19.0: BAR 0 [mem 0x80085000-0x80085fff]
[ 0.065138] pci 0001:00:1b.0: [1033:0035] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.065183] pci 0001:00:1b.0: BAR 0 [mem 0x80084000-0x80084fff]
[ 0.065262] pci 0001:00:1b.0: supports D1 D2
[ 0.065278] pci 0001:00:1b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.065625] pci 0001:00:1b.1: [1033:0035] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.065666] pci 0001:00:1b.1: BAR 0 [mem 0x80083000-0x80083fff]
[ 0.065744] pci 0001:00:1b.1: supports D1 D2
[ 0.065761] pci 0001:00:1b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.066086] pci 0001:00:1b.2: [1033:00e0] type 00 class 0x0c0320 conventional PCI endpoint
[ 0.066126] pci 0001:00:1b.2: BAR 0 [mem 0x80080000-0x800800ff]
[ 0.066203] pci 0001:00:1b.2: supports D1 D2
[ 0.066219] pci 0001:00:1b.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.066652] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.068086] PCI host bridge to bus 0002:00
[ 0.068117] pci_bus 0002:00: root bus resource [io 0x880000-0x107ffff] (bus address [0x0000-0x7fffff])
[ 0.068144] pci_bus 0002:00: root bus resource [mem 0xf5000000-0xf5ffffff]
[ 0.068168] pci_bus 0002:00: root bus resource [bus 00-ff]
[ 0.068188] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.068713] pci 0002:00:0b.0: [106b:0036] type 00 class 0x060000 conventional PCI endpoint
[ 0.069122] pci 0002:00:0d.0: [106b:0033] type 00 class 0xff0000 conventional PCI endpoint
[ 0.069163] pci 0002:00:0d.0: BAR 0 [mem 0xf5004000-0xf5007fff]
[ 0.069677] pci 0002:00:0e.0: [106b:0031] type 00 class 0x0c0010 conventional PCI endpoint
[ 0.069718] pci 0002:00:0e.0: BAR 0 [mem 0xf5000000-0xf5000fff]
[ 0.069788] pci 0002:00:0e.0: supports D1 D2
[ 0.069805] pci 0002:00:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.070122] pci 0002:00:0f.0: [106b:0032] type 00 class 0x020000 conventional PCI endpoint
[ 0.070162] pci 0002:00:0f.0: BAR 0 [mem 0xf5200000-0xf53fffff]
[ 0.070212] pci 0002:00:0f.0: ROM [mem 0xf5100000-0xf51fffff pref]
[ 0.071069] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.071481] PCI 0000:00 Cannot reserve Legacy IO [io 0xff780000-0xff780fff]
[ 0.071517] PCI 0001:00 Cannot reserve Legacy IO [io 0x0000-0x0fff]
[ 0.071548] pci_bus 0000:00: resource 4 [io 0xff780000-0xfff7ffff]
[ 0.071568] pci_bus 0000:00: resource 5 [mem 0xf1000000-0xf1ffffff]
[ 0.071587] pci_bus 0000:00: resource 6 [mem 0x90000000-0xafffffff]
[ 0.071629] pci 0001:00:15.2: BAR 2 [mem 0xf3000000-0xf3000fff]: assigned
[ 0.071654] pci 0001:00:15.2: BAR 4 [mem 0xf3001000-0xf3001fff]: assigned
[ 0.071677] pci 0001:00:15.2: BAR 0 [io 0x1000-0x1007]: assigned
[ 0.071699] pci 0001:00:15.2: BAR 1 [io 0x1008-0x100f]: assigned
[ 0.071761] pci_bus 0001:00: resource 4 [io 0x0000-0x7fffff]
[ 0.071782] pci_bus 0001:00: resource 5 [mem 0xf3000000-0xf3ffffff]
[ 0.071801] pci_bus 0001:00: resource 6 [mem 0x80000000-0x8fffffff]
[ 0.071823] pci_bus 0002:00: resource 4 [io 0x880000-0x107ffff]
[ 0.071842] pci_bus 0002:00: resource 5 [mem 0xf5000000-0xf5ffffff]
[ 0.135228] raid6: altivecx8 gen() 3297 MB/s
[ 0.191989] raid6: altivecx4 gen() 3400 MB/s
[ 0.248753] raid6: altivecx2 gen() 3175 MB/s
[ 0.305513] raid6: altivecx1 gen() 2594 MB/s
[ 0.362303] raid6: int32x8 gen() 358 MB/s
[ 0.419043] raid6: int32x4 gen() 441 MB/s
[ 0.475776] raid6: int32x2 gen() 794 MB/s
[ 0.532542] raid6: int32x1 gen() 551 MB/s
[ 0.532558] raid6: using algorithm altivecx4 gen() 3400 MB/s
[ 0.532574] raid6: using intx1 recovery algorithm
[ 0.535352] SCSI subsystem initialized
[ 0.536134] libata version 3.00 loaded.
[ 0.536457] usbcore: registered new interface driver usbfs
[ 0.536629] usbcore: registered new interface driver hub
[ 0.536736] usbcore: registered new device driver usb
[ 0.540121] pci 0000:00:10.0: vgaarb: setting as boot VGA device
[ 0.540160] pci 0000:00:10.0: vgaarb: bridge control possible
[ 0.540177] pci 0000:00:10.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
[ 0.540228] vgaarb: loaded
[ 0.540594] clocksource: Switched to clocksource timebase
[ 0.562874] NET: Registered PF_INET protocol family
[ 0.563632] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.566877] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 10240 bytes, linear)
[ 0.567740] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.568424] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.570210] TCP bind hash table entries: 8192 (order: 6, 327680 bytes, linear)
[ 0.570792] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.571443] UDP hash table entries: 512 (order: 2, 24576 bytes, linear)
[ 0.571623] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes, linear)
[ 0.572371] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.572680] pci 0001:00:12.0: enabling device (0000 -> 0002)
[ 0.572773] pci 0001:00:12.1: enabling device (0000 -> 0002)
[ 0.572824] pci 0001:00:12.2: enabling device (0004 -> 0006)
[ 0.572903] Apple USB OHCI 0001:00:18.0 disabled by firmware
[ 0.572922] pci 0001:00:18.0: Can't enable PCI device, BIOS handoff failed.
[ 0.572946] Apple USB OHCI 0001:00:19.0 disabled by firmware
[ 0.572962] pci 0001:00:19.0: Can't enable PCI device, BIOS handoff failed.
[ 0.572990] pci 0001:00:1b.0: enabling device (0000 -> 0002)
[ 0.573038] pci 0001:00:1b.1: enabling device (0000 -> 0002)
[ 0.573085] pci 0001:00:1b.2: enabling device (0004 -> 0006)
[ 0.573147] pci 0002:00:0f.0: CLS mismatch (32 != 1020), using 32 bytes
[ 0.574461] Thermal assist unit not available
[ 0.576770] Initialise system trusted keyrings
[ 0.577075] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 0.589014] 9p: Installing v9fs 9p2000 file system support
[ 0.589689] NET: Registered PF_ALG protocol family
[ 0.589774] xor: measuring software checksum speed
[ 0.598352] 8regs : 1152 MB/sec
[ 0.608445] 8regs_prefetch : 976 MB/sec
[ 0.616544] 32regs : 1218 MB/sec
[ 0.625789] 32regs_prefetch : 1066 MB/sec
[ 0.627907] altivec : 4699 MB/sec
[ 0.627922] xor: using function: altivec (4699 MB/sec)
[ 0.627954] Key type asymmetric registered
[ 0.627970] Asymmetric key parser 'x509' registered
[ 0.633324] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.633643] io scheduler bfq registered
[ 0.638636] Using unsupported 1920x1080 (null) at a0008000, depth=8, pitch=2048
[ 0.680159] Console: switching to colour frame buffer device 240x67
[ 0.720373] fb0: Open Firmware frame buffer device on /pci@f0000000/ATY,AlteracParent@10/ATY,Alterac_A@0
[ 0.721493] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.724773] serial 0001:00:15.0: enabling device (0004 -> 0007)
[ 0.726095] 0001:00:15.0: ttyS0 at I/O 0x410 (irq = 58, base_baud = 115200) is a 16550A
[ 0.726836] serial 0001:00:15.1: enabling device (0004 -> 0007)
[ 0.728037] 0001:00:15.1: ttyS1 at I/O 0x400 (irq = 58, base_baud = 115200) is a 16550A
[ 0.730268] MacIO PCI driver attached to Keylargo chipset
[ 0.737374] sata_sil 0001:00:13.0: version 2.4
[ 0.737679] sata_sil 0001:00:13.0: enabling device (0004 -> 0007)
[ 0.739997] scsi host0: sata_sil
[ 0.741660] scsi host1: sata_sil
[ 0.742209] ata1: SATA max UDMA/100 mmio m512@0x80082000 tf 0x80082080 irq 53 lpm-pol 0
[ 0.742463] ata2: SATA max UDMA/100 mmio m512@0x80082000 tf 0x800820c0 irq 53 lpm-pol 0
[ 0.743013] pata-pci-macio 0002:00:0d.0: enabling device (0004 -> 0006)
[ 0.760600] pata-pci-macio 0002:00:0d.0: Activating pata-macio chipset UniNorth ATA-6, Apple bus ID 3
[ 0.762460] scsi host2: pata_macio
[ 0.762972] ata3: PATA max UDMA/100 irq 39 lpm-pol 0
[ 1.056957] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1.059923] ata1.00: ATA-9: SanDisk SSD PLUS 240GB, UF4500RL, max UDMA/133
[ 1.060143] ata1.00: 468877312 sectors, multi 1: LBA48 NCQ (depth 0/32)
[ 1.061699] ata1.00: Features: Dev-Sleep
[ 1.087808] ata1.00: configured for UDMA/100
[ 1.088822] scsi 0:0:0:0: Direct-Access ATA SanDisk SSD PLUS 00RL PQ: 0 ANSI: 5
[ 1.091515] sd 0:0:0:0: [sda] 468877312 512-byte logical blocks: (240 GB/224 GiB)
[ 1.091817] sd 0:0:0:0: [sda] Write Protect is off
[ 1.091979] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.092212] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.092645] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 1.096058] sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[ 1.098464] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.513944] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1.516506] ata2.00: ATA-9: WDC WD5000LPLX-60ZNTT1, 02.01A02, max UDMA/133
[ 1.516724] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 1.519412] ata2.00: configured for UDMA/100
[ 1.520104] scsi 1:0:0:0: Direct-Access ATA WDC WD5000LPLX-6 1A02 PQ: 0 ANSI: 5
[ 1.522397] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.522646] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1.522869] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.523029] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.523262] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.523687] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
[ 1.787271] pata-macio 0.0001f000:ata-4: Activating pata-macio chipset KeyLargo ATA-4, Apple bus ID 2
[ 1.798011] scsi host3: pata_macio
[ 1.807474] ata4: PATA max UDMA/66 irq 19 lpm-pol 0
[ 1.973205] ata4.00: CFA: DeLOCK 54143 512MB, 100511E, max UDMA/66
[ 1.982481] ata4.00: 1009008 sectors, multi 1: LBA
[ 2.292998] sdb: [mac] sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8
[ 2.304633] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.314600] scsi 3:0:0:0: Direct-Access ATA DeLOCK 54143 512 11E PQ: 0 ANSI: 5
[ 2.325908] sd 3:0:0:0: [sdc] 1009008 512-byte logical blocks: (517 MB/493 MiB)
[ 2.335363] sd 3:0:0:0: [sdc] Write Protect is off
[ 2.344647] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.354002] sd 3:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.363575] sd 3:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
[ 2.375917] sdc: [mac] sdc1 sdc2 sdc3 sdc4 sdc5 sdc6
[ 2.387268] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 2.853934] pata-macio 0.00020000:ata-3: Activating pata-macio chipset KeyLargo ATA-3, Apple bus ID 0
[ 2.865389] scsi host4: pata_macio
[ 2.875628] ata5: PATA max MWDMA2 irq 20 lpm-pol 0
[ 2.885951] sungem.c:v1.0 David S. Miller <davem@redhat.com>
[ 2.897632] gem 0002:00:0f.0 eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0a:95:9c:76:3a
[ 2.909086] ehci-pci 0001:00:12.2: EHCI Host Controller
[ 2.910779] rtc-generic rtc-generic: registered as rtc0
[ 2.919159] ehci-pci 0001:00:12.2: new USB bus registered, assigned bus number 1
[ 2.929771] PowerMac i2c bus pmu 2 registered
[ 2.939516] ehci-pci 0001:00:12.2: irq 52, io mem 0x80081000
[ 2.949767] PowerMac i2c bus pmu 1 registered
[ 2.970265] PowerMac i2c bus mac-io 0 registered
[ 2.980117] i2c i2c-2: No i2c address for /pci@f2000000/mac-io@17/i2c@18000/i2c-modem
[ 2.980596] ehci-pci 0001:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.990208] PowerMac i2c bus uni-n 1 registered
[ 3.000230] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09
[ 3.009546] i2c i2c-3: i2c-powermac: modalias failure on /uni-n@f8000000/i2c@f8001000/cereal@1c0
[ 3.019406] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.029653] PowerMac i2c bus uni-n 0 registered
[ 3.039247] usb usb1: Product: EHCI Host Controller
[ 3.039255] usb usb1: Manufacturer: Linux 6.9.3-gentoo-PMacG4 ehci_hcd
[ 3.050306] hid: raw HID events driver (C) Jiri Kosina
[ 3.059172] usb usb1: SerialNumber: 0001:00:12.2
[ 3.078420] hub 1-0:1.0: USB hub found
[ 3.079654] usbcore: registered new interface driver usbhid
[ 3.089651] ata5.00: ATAPI: _NEC DVD_RW ND-3520A, 1.04, max UDMA/33
[ 3.099378] usbhid: USB HID core driver
[ 3.109580] hub 1-0:1.0: 5 ports detected
[ 3.121067] NET: Registered PF_INET6 protocol family
[ 3.140650] ehci-pci 0001:00:1b.2: EHCI Host Controller
[ 3.151182] scsi 4:0:0:0: CD-ROM _NEC DVD_RW ND-3520A 1.04 PQ: 0 ANSI: 5
[ 3.159382] ehci-pci 0001:00:1b.2: new USB bus registered, assigned bus number 2
[ 3.179713] ehci-pci 0001:00:1b.2: irq 63, io mem 0x80080000
[ 3.180345] Segment Routing with IPv6
[ 3.199959] In-situ OAM (IOAM) with IPv6
[ 3.210328] 9pnet: Installing 9P2000 support
[ 3.210598] ehci-pci 0001:00:1b.2: USB 2.0 started, EHCI 1.00
[ 3.220691] drmem: No dynamic reconfiguration memory found
[ 3.230589] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09
[ 3.250032] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.257468] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 3.259909] usb usb2: Product: EHCI Host Controller
[ 3.278373] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 3.280085] usb usb2: Manufacturer: Linux 6.9.3-gentoo-PMacG4 ehci_hcd
[ 3.290258] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.300413] usb usb2: SerialNumber: 0001:00:1b.2
[ 3.321427] registered taskstats version 1
[ 3.321787] hub 2-0:1.0: USB hub found
[ 3.332235] Loading compiled-in X.509 certificates
[ 3.341530] hub 2-0:1.0: 5 ports detected
[ 3.375518] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 3.443929] usb 1-5: new high-speed USB device number 2 using ehci-pci
[ 3.478809] zswap: loaded using pool lzo/zsmalloc
[ 3.489054] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers
[ 3.499432] page_owner is disabled
[ 3.531801] Btrfs loaded, zoned=no, fsverity=no
[ 3.602956] usb 1-5: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98
[ 3.613152] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.623179] usb 1-5: Product: USB2.0 Hub
[ 3.634116] hub 1-5:1.0: USB hub found
[ 3.644444] hub 1-5:1.0: 4 ports detected
[ 3.933939] usb 1-5.1: new low-speed USB device number 3 using ehci-pci
[ 4.068838] usb 1-5.1: New USB device found, idVendor=04d9, idProduct=0006, bcdDevice= 1.40
[ 4.078805] usb 1-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.088688] usb 1-5.1: Product: RPI Wired Keyboard 5
[ 4.098496] usb 1-5.1: Manufacturer:
[ 4.123220] input: RPI Wired Keyboard 5 as /devices/pci0001:00/0001:00:12.2/usb1/1-5/1-5.1/1-5.1:1.0/0003:04D9:0006.0001/input/input0
[ 4.188562] hid-generic 0003:04D9:0006.0001: input,hidraw0: USB HID v1.11 Keyboard [ RPI Wired Keyboard 5] on usb-0001:00:12.2-5.1/input0
[ 4.212112] input: RPI Wired Keyboard 5 as /devices/pci0001:00/0001:00:12.2/usb1/1-5/1-5.1/1-5.1:1.1/0003:04D9:0006.0002/input/input1
[ 4.281125] hid-generic 0003:04D9:0006.0002: input,hidraw1: USB HID v1.11 Device [ RPI Wired Keyboard 5] on usb-0001:00:12.2-5.1/input1
[ 4.306414] input: PMU as /devices/virtual/input/input2
[ 4.317352] netpoll: netconsole: local port 6666
[ 4.327783] netpoll: netconsole: local IPv4 address 192.168.2.8
[ 4.338168] netpoll: netconsole: interface 'eth0'
[ 4.348441] netpoll: netconsole: remote port 6666
[ 4.358601] netpoll: netconsole: remote IPv4 address 192.168.2.3
[ 4.368746] netpoll: netconsole: remote ethernet address a8:a1:59:16:4f:ea
[ 4.378948] netpoll: netconsole: device eth0 not up yet, forcing it
[ 4.443943] usb 1-5.3: new low-speed USB device number 4 using ehci-pci
[ 4.467658] sungem_phy: PHY ID: 2060e1, addr: 0
[ 4.477945] gem 0002:00:0f.0 eth0: Found BCM5421 PHY
[ 4.571842] usb 1-5.3: New USB device found, idVendor=275d, idProduct=0ba6, bcdDevice= 1.00
[ 4.582026] usb 1-5.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.592078] usb 1-5.3: Product: USB OPTICAL MOUSE
[ 4.607116] input: USB OPTICAL MOUSE as /devices/pci0001:00/0001:00:12.2/usb1/1-5/1-5.3/1-5.3:1.0/0003:275D:0BA6.0003/input/input3
[ 4.618126] hid-generic 0003:275D:0BA6.0003: input,hidraw2: USB HID v1.11 Mouse [USB OPTICAL MOUSE ] on usb-0001:00:12.2-5.3/input0
[ 8.160948] gem 0002:00:0f.0 eth0: Link is up at 1000 Mbps, full-duplex
[ 8.171499] gem 0002:00:0f.0 eth0: Pause is enabled (rxfifo: 10240 off: 7168 on: 5632)
[ 8.171989] printk: legacy console [netcon0] enabled
[ 8.199268] netconsole: network logging started
[ 8.224693] EXT4-fs (sda5): mounted filesystem fa07e66f-b4f9-404f-85d8-487d3c097aec ro with ordered data mode. Quota mode: disabled.
[ 8.235764] VFS: Mounted root (ext4 filesystem) readonly on device 8:5.
[ 8.250164] devtmpfs: mounted
[ 8.263366] Freeing unused kernel image (initmem) memory: 1100K
[ 8.279942] Checked W+X mappings: passed, no W+X pages found
[ 8.290875] rodata_test: all tests were successful
[ 8.301706] Run /sbin/init as init process
[ 8.312423] with arguments:
[ 8.323038] /sbin/init
[ 8.333565] with environment:
[ 8.344037] HOME=/
[ 8.354455] TERM=linux
[ 12.558431] ohci-pci 0001:00:12.0: OHCI PCI host controller
[ 12.577412] ohci-pci 0001:00:12.0: new USB bus registered, assigned bus number 3
[ 12.594223] ohci-pci 0001:00:12.0: irq 52, io mem 0x8008c000
[ 12.705524] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09
[ 12.715291] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.724656] usb usb3: Product: OHCI PCI host controller
[ 12.733946] usb usb3: Manufacturer: Linux 6.9.3-gentoo-PMacG4 ohci_hcd
[ 12.743247] usb usb3: SerialNumber: 0001:00:12.0
[ 12.815938] hub 3-0:1.0: USB hub found
[ 12.848855] hub 3-0:1.0: 3 ports detected
[ 12.880169] ohci-pci 0001:00:12.1: OHCI PCI host controller
[ 12.906139] ohci-pci 0001:00:12.1: new USB bus registered, assigned bus number 4
[ 12.915437] ohci-pci 0001:00:12.1: irq 52, io mem 0x8008b000
[ 13.051875] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09
[ 13.060534] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.069038] usb usb4: Product: OHCI PCI host controller
[ 13.074094] [drm] radeon kernel modesetting enabled.
[ 13.077503] usb usb4: Manufacturer: Linux 6.9.3-gentoo-PMacG4 ohci_hcd
[ 13.077514] usb usb4: SerialNumber: 0001:00:12.1
[ 13.117285] Console: switching to colour dummy device 80x25
[ 13.125479] radeon 0000:00:10.0: enabling device (0006 -> 0007)
[ 13.130985] [drm] initializing kernel modesetting (RV350 0x1002:0x4150 0x1002:0x0002 0x00).
[ 13.131094] [drm] Forcing AGP to PCI mode
[ 13.131209] radeon 0000:00:10.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0x0000
[ 13.131222] hub 4-0:1.0: USB hub found
[ 13.132251] hub 4-0:1.0: 2 ports detected
[ 13.154315] Apple USB OHCI 0001:00:18.0 disabled by firmware
[ 13.154657] Apple USB OHCI 0001:00:19.0 disabled by firmware
[ 13.155211] ohci-pci 0001:00:1b.0: OHCI PCI host controller
[ 13.155392] ohci-pci 0001:00:1b.0: new USB bus registered, assigned bus number 5
[ 13.155918] ohci-pci 0001:00:1b.0: irq 63, io mem 0x80084000
[ 13.220749] [drm] Generation 2 PCI interface, using max accessible memory
[ 13.220831] radeon 0000:00:10.0: VRAM: 256M 0x00000000A0000000 - 0x00000000AFFFFFFF (256M used)
[ 13.220872] radeon 0000:00:10.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
[ 13.221233] [drm] Detected VRAM RAM=256M, BAR=256M
[ 13.221271] [drm] RAM width 128bits DDR
[ 13.239106] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09
[ 13.239218] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.239281] usb usb5: Product: OHCI PCI host controller
[ 13.239321] usb usb5: Manufacturer: Linux 6.9.3-gentoo-PMacG4 ohci_hcd
[ 13.239351] usb usb5: SerialNumber: 0001:00:1b.0
[ 13.244559] hub 5-0:1.0: USB hub found
[ 13.246554] hub 5-0:1.0: 3 ports detected
[ 13.250880] [drm] radeon: 256M of VRAM memory ready
[ 13.250989] [drm] radeon: 512M of GTT memory ready.
[ 13.251190] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 13.268386] ohci-pci 0001:00:1b.1: OHCI PCI host controller
[ 13.268503] ohci-pci 0001:00:1b.1: new USB bus registered, assigned bus number 6
[ 13.268719] ohci-pci 0001:00:1b.1: irq 63, io mem 0x80083000
[ 13.273375] [drm] radeon: 1 quad pipes, 1 Z pipes initialized
[ 13.273526] [drm] PCI GART of 512M enabled (table at 0x0000000005400000).
[ 13.273683] radeon 0000:00:10.0: WB enabled
[ 13.273741] radeon 0000:00:10.0: fence driver on ring 0 use gpu addr 0x0000000080000000
[ 13.287425] [drm] radeon: irq initialized.
[ 13.287627] [drm] Loading R300 Microcode
[ 13.287718] Loading firmware: radeon/R300_cp.bin
[ 13.337403] [drm] radeon: ring at 0x0000000080001000
[ 13.337561] [drm] ring test succeeded in 1 usecs
[ 13.350764] [drm] ib test succeeded in 0 usecs
[ 13.350870] stackdepot: allocating hash table of 65536 entries via kvcalloc
[ 13.362137] [drm] Radeon Display Connectors
[ 13.362200] [drm] Connector 0:
[ 13.362251] [drm] DVI-I-1
[ 13.362284] [drm] HPD2
[ 13.362316] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 13.362356] [drm] Encoders:
[ 13.362378] [drm] CRT1: INTERNAL_DAC1
[ 13.362407] [drm] DFP2: INTERNAL_DVO1
[ 13.362441] [drm] Connector 1:
[ 13.362472] [drm] DVI-I-2
[ 13.362504] [drm] HPD1
[ 13.362534] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 13.362573] [drm] Encoders:
[ 13.362596] [drm] CRT2: INTERNAL_DAC2
[ 13.362629] [drm] DFP1: INTERNAL_TMDS1
[ 13.362891] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:10.0 on minor 0
[ 13.439612] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09
[ 13.439747] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.439784] usb usb6: Product: OHCI PCI host controller
[ 13.439839] usb usb6: Manufacturer: Linux 6.9.3-gentoo-PMacG4 ohci_hcd
[ 13.439870] usb usb6: SerialNumber: 0001:00:1b.1
[ 13.464430] hub 6-0:1.0: USB hub found
[ 13.464795] hub 6-0:1.0: 2 ports detected
[ 13.504284] [drm] fb mappable at 0xA0040000
[ 13.504378] [drm] vram apper at 0xA0000000
[ 13.504419] [drm] size 8294400
[ 13.504452] [drm] fb depth is 24
[ 13.504485] [drm] pitch is 7680
[ 13.557576] Console: switching to colour frame buffer device 240x67
[ 13.609834] radeon 0000:00:10.0: [drm] fb0: radeondrmfb frame buffer device
[ 14.357419] ADM1030 fan controller [@2c]
[ 14.370654] DS1775 digital thermometer [@49]
[ 14.370885] Temp: 57.5 C
[ 14.370893] Hyst: 70.0 C
[ 14.371009] OS: 75.0 C
[ 14.371130]
[ 14.450237] gem 0002:00:0f.0 enP2p0s15: renamed from eth0 (while UP)
[ 15.110525] EXT4-fs (sda5): re-mounted fa07e66f-b4f9-404f-85d8-487d3c097aec r/w. Quota mode: disabled.
[ 15.204214] EXT4-fs (sda5): re-mounted fa07e66f-b4f9-404f-85d8-487d3c097aec r/w. Quota mode: disabled.
[ 15.763985] Adding 8388604k swap on /dev/sdb6. Priority:-2 extents:1 across:8388604k
[ 15.982607] EXT4-fs (sdc5): mounting ext2 file system using the ext4 subsystem
[ 15.991441] EXT4-fs (sdc5): mounted filesystem e4e8af9e-0f0d-44f9-b983-71bf61d782de r/w without journal. Quota mode: disabled.
[ 15.992124] ext2 filesystem being mounted at /boot supports timestamps until 2038-01-19 (0x7fffffff)
[ 15.994477] BTRFS: device label tmp devid 1 transid 4847 /dev/sda6 (8:6) scanned by mount (870)
[ 15.996873] BTRFS info (device sda6): first mount of filesystem 65162d91-887e-4e48-a356-fbf7093eefb5
[ 15.997327] BTRFS info (device sda6): using xxhash64 (xxhash64-generic) checksum algorithm
[ 15.997709] BTRFS info (device sda6): using free-space-tree
[ 17.873974] random: crng init done
[ 595.178356] kswapd0: page allocation failure: order:0, mode:0xcc0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0
[ 595.178956] CPU: 1 PID: 39 Comm: kswapd0 Not tainted 6.9.3-gentoo-PMacG4 #4
[ 595.179285] Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
[ 595.179562] Call Trace:
[ 595.179688] [c1cd1940] [c076dc20] dump_stack_lvl+0x70/0x8c (unreliable)
[ 595.180014] [c1cd1960] [c01abfdc] warn_alloc+0x100/0x178
[ 595.180278] [c1cd19c0] [c01ac3c4] __alloc_pages+0x370/0x8d0
[ 595.180541] [c1cd1a80] [c01b9edc] __read_swap_cache_async+0xc0/0x1cc
[ 595.180849] [c1cd1ad0] [c01c099c] zswap_writeback_entry+0x50/0x154
[ 595.181144] [c1cd1be0] [c01c0b10] shrink_memcg_cb+0x70/0xec
[ 595.181403] [c1cd1c10] [c018bdc8] __list_lru_walk_one+0xa0/0x154
[ 595.181686] [c1cd1c70] [c018bee0] list_lru_walk_one+0x64/0x7c
[ 595.181953] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 595.181959] cache: skbuff_small_head, object size: 416, buffer size: 480, default order: 1, min order: 0
[ 595.181967] node 0: slabs: 17, objs: 289, free: 0
[ 595.182324] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 595.182331] cache: skbuff_small_head, object size: 416, buffer size: 480, default order: 1, min order: 0
[ 595.182338] node 0: slabs: 17, objs: 289, free: 0
[ 595.182797] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 595.182804] cache: skbuff_small_head, object size: 416, buffer size: 480, default order: 1, min order: 0
[ 595.182811] node 0: slabs: 17, objs: 289, free: 0
[ 595.183071] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 595.183077] cache: skbuff_small_head, object size: 416, buffer size: 480, default order: 1, min order: 0
[ 595.183084] node 0: slabs: 17, objs: 289, free: 0
[ 595.183428] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 595.183434] cache: skbuff_small_head, object size: 416, buffer size: 480, default order: 1, min order: 0
[ 595.183441] node 0: slabs: 17, objs: 289, free: 0
[ 595.183899] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 595.183905] cache: skbuff_small_head, object size: 416, buffer size: 480, default order: 1, min order: 0
[ 595.183912] node 0: slabs: 17, objs: 289, free: 0
[ 595.184145] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 595.184152] cache: kmalloc-rnd-06-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
[ 595.184159] kmalloc-rnd-06-2k debugging increased min order, use slab_debug=O to disable.
[ 595.184163] node 0: slabs: 38, objs: 190, free: 0
[ 595.184180] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 595.184186] cache: skbuff_small_head, object size: 416, buffer size: 480, default order: 1, min order: 0
[ 595.184192] node 0: slabs: 17, objs: 289, free: 0
[ 595.184509] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 595.184516] cache: kmalloc-rnd-06-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
[ 595.184522] kmalloc-rnd-06-2k debugging increased min order, use slab_debug=O to disable.
[ 595.184527] node 0: slabs: 38, objs: 190, free: 0
[ 595.184543] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 595.184548] cache: skbuff_small_head, object size: 416, buffer size: 480, default order: 1, min order: 0
[ 595.184555] node 0: slabs: 17, objs: 289, free: 0
[ 595.192900] [c1cd1ca0] [c01c0320] zswap_shrinker_scan+0xac/0xc4
[ 595.193201] [c1cd1cd0] [c0177304] do_shrink_slab+0x18c/0x2f4
[ 595.193486] [c1cd1d20] [c0177808] shrink_slab+0x174/0x260
[ 595.193760] [c1cd1da0] [c01738f8] shrink_one+0xbc/0x134
[ 595.196908] Mem-Info:
[ 595.197520] active_anon:83161 inactive_anon:56713 isolated_anon:0
[ 595.197520] active_file:2847 inactive_file:4533 isolated_file:0
[ 595.197520] unevictable:4 dirty:0 writeback:2
[ 595.197520] slab_reclaimable:960 slab_unreclaimable:8786
[ 595.197520] mapped:4030 shmem:67 pagetables:516
[ 595.197520] sec_pagetables:0 bounce:0
[ 595.197520] kernel_misc_reclaimable:0
[ 595.197520] free:0 free_pcp:83 free_cma:0
[ 595.199174] Node 0 active_anon:332644kB inactive_anon:226852kB active_file:11388kB inactive_file:18132kB unevictable:16kB isolated(anon):0kB isolated(file):0kB mapped:16120kB dirty:0kB writeback:8kB shmem:268kB writeback_tmp:0kB kernel_stack:968kB pagetables:2064kB sec_pagetables:0kB all_unreclaimable? no
[ 595.200384] DMA free:0kB boost:7848kB min:11336kB low:12208kB high:13080kB reserved_highatomic:0KB active_anon:332644kB inactive_anon:226852kB active_file:11388kB inactive_file:18132kB unevictable:16kB writepending:8kB present:786432kB managed:762968kB mlocked:16kB bounce:0kB free_pcp:332kB local_pcp:332kB free_cma:0kB
[ 595.201633] lowmem_reserve[]: 0 0 0
[ 595.201669] DMA: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 0kB
[ 595.235974] 12656 total pagecache pages
[ 595.254368] 5205 pages in swap cache
[ 595.272691] Free swap = 7862520kB
[ 595.290873] Total swap = 8388604kB
[ 595.308962] 196608 pages RAM
[ 595.326985] 0 pages HighMem/MovableOnly
[ 595.345015] 5866 pages reserved
[ 598.480127] CPU-temp: 59.3 C
[ 598.480158] , Case: 35.5 C
[ 598.498263] , Fan: 6 (tuned +1)
[ 602.201673] slab_out_of_memory: 367 callbacks suppressed
[ 602.217576] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 602.217587] cache: skbuff_head_cache, object size: 176, buffer size: 224, default order: 0, min order: 0
[ 602.217595] node 0: slabs: 31, objs: 558, free: 0
[ 602.233094] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 602.233101] cache: skbuff_head_cache, object size: 176, buffer size: 224, default order: 0, min order: 0
[ 602.233109] node 0: slabs: 31, objs: 558, free: 0
[ 602.233117] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 602.233123] cache: skbuff_head_cache, object size: 176, buffer size: 224, default order: 0, min order: 0
[ 602.233129] node 0: slabs: 31, objs: 558, free: 0
[ 602.249130] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 602.249136] cache: skbuff_head_cache, object size: 176, buffer size: 224, default order: 0, min order: 0
[ 602.249143] node 0: slabs: 31, objs: 558, free: 0
[ 602.249152] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 602.249157] cache: skbuff_head_cache, object size: 176, buffer size: 224, default order: 0, min order: 0
[ 602.249164] node 0: slabs: 31, objs: 558, free: 0
[ 602.264950] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 602.264955] cache: skbuff_head_cache, object size: 176, buffer size: 224, default order: 0, min order: 0
[ 602.264962] node 0: slabs: 31, objs: 558, free: 0
[ 602.264971] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 602.264976] cache: skbuff_head_cache, object size: 176, buffer size: 224, default order: 0, min order: 0
[ 602.264983] node 0: slabs: 31, objs: 558, free: 0
[ 602.549073] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 602.566784] cache: skbuff_head_cache, object size: 176, buffer size: 224, default order: 0, min order: 0
[ 602.584654] node 0: slabs: 33, objs: 594, free: 11
[ 606.794528] warn_alloc: 1701 callbacks suppressed
[ 606.794556] kswapd0: page allocation failure: order:0, mode:0xcc0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0
[ 606.830214] CPU: 1 PID: 39 Comm: kswapd0 Not tainted 6.9.3-gentoo-PMacG4 #4
[ 606.848103] Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
[ 606.865936] Call Trace:
[ 606.883550] [c1cd1940] [c076dc20] dump_stack_lvl+0x70/0x8c (unreliable)
[ 606.901297] [c1cd1960] [c01abfdc] warn_alloc+0x100/0x178
[ 606.918879] [c1cd19c0] [c01ac3c4] __alloc_pages+0x370/0x8d0
[ 606.936383] [c1cd1a80] [c01b9edc] __read_swap_cache_async+0xc0/0x1cc
[ 606.953924] [c1cd1ad0] [c01c099c] zswap_writeback_entry+0x50/0x154
[ 606.971456] [c1cd1be0] [c01c0b10] shrink_memcg_cb+0x70/0xec
[ 606.989073] [c1cd1c10] [c018bdc8] __list_lru_walk_one+0xa0/0x154
[ 607.006762] [c1cd1c70] [c018bee0] list_lru_walk_one+0x64/0x7c
[ 607.024410] [c1cd1ca0] [c01c0320] zswap_shrinker_scan+0xac/0xc4
[ 607.042095] [c1cd1cd0] [c0177304] do_shrink_slab+0x18c/0x2f4
[ 607.059832] [c1cd1d20] [c0177808] shrink_slab+0x174/0x260
[ 607.077551] [c1cd1da0] [c01738f8] shrink_one+0xbc/0x134
[ 607.095152] [c1cd1dd0] [c01751cc] shrink_node+0x238/0x84c
[ 607.112685] [c1cd1e50] [c0175b28] balance_pgdat+0x348/0x658
[ 607.130210] [c1cd1f50] [c0176060] kswapd+0x228/0x25c
[ 607.147701] [c1cd1fc0] [c0065780] kthread+0xe4/0xe8
[ 607.165060] [c1cd1ff0] [c0015304] start_kernel_thread+0x10/0x14
[ 607.182908] Mem-Info:
[ 607.200361] active_anon:100938 inactive_anon:41675 isolated_anon:0
[ 607.200361] active_file:3593 inactive_file:4184 isolated_file:0
[ 607.200361] unevictable:4 dirty:3 writeback:6
[ 607.200361] slab_reclaimable:1019 slab_unreclaimable:8501
[ 607.200361] mapped:4263 shmem:34 pagetables:541
[ 607.200361] sec_pagetables:0 bounce:0
[ 607.200361] kernel_misc_reclaimable:0
[ 607.200361] free:0 free_pcp:163 free_cma:0
[ 607.200387] Node 0 active_anon:403752kB inactive_anon:166700kB active_file:14372kB inactive_file:16736kB unevictable:16kB isolated(anon):0kB isolated(file):0kB mapped:17052kB dirty:12kB writeback:24kB shmem:136kB writeback_tmp:0kB kernel_stack:968kB pagetables:2164kB sec_pagetables:0kB all_unreclaimable? no
[ 607.340486] DMA free:0kB boost:7848kB min:11336kB low:12208kB high:13080kB reserved_highatomic:0KB active_anon:403820kB inactive_anon:166632kB active_file:14372kB inactive_file:16736kB unevictable:16kB writepending:172kB present:786432kB managed:762968kB mlocked:16kB bounce:0kB free_pcp:652kB local_pcp:648kB free_cma:0kB
[ 607.375033] lowmem_reserve[]: 0 0 0
[ 607.392529] DMA: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 0kB
[ 607.410482] 22090 total pagecache pages
[ 607.410488] 14275 pages in swap cache
[ 607.410492] Free swap = 7731176kB
[ 607.410496] Total swap = 8388604kB
[ 607.410500] 196608 pages RAM
[ 607.410504] 0 pages HighMem/MovableOnly
[ 607.410507] 5866 pages reserved
[ 623.614313] BTRFS info (device sda6): last unmount of filesystem 65162d91-887e-4e48-a356-fbf7093eefb5
[ 623.688672] EXT4-fs (sdc5): unmounting filesystem e4e8af9e-0f0d-44f9-b983-71bf61d782de.
[ 627.057390] elogind-daemon[1505]: Received signal 15 [TERM]
[ 627.679316] EXT4-fs (sda5): re-mounted fa07e66f-b4f9-404f-85d8-487d3c097aec ro. Quota mode: disabled.
[ 627.810940] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 627.828388] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 627.845947] reboot: Restarting system
[-- Attachment #3: config_6192_g4 --]
[-- Type: application/octet-stream, Size: 100474 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/powerpc 6.1.92 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="gcc (Gentoo 13.2.1_p20240210 p14) 13.2.1 20240210"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=130201
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=24200
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=24200
CONFIG_LLD_VERSION=0
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_GOTO_TIED_OUTPUT=y
CONFIG_GCC_ASM_GOTO_OUTPUT_WORKAROUND=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=0
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION="-PMacG4"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_XZ is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_WATCH_QUEUE=y
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_DOMAIN_NOMAP=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem
CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
# CONFIG_BPF_JIT is not set
# CONFIG_BPF_UNPRIV_DEFAULT_OFF is not set
CONFIG_USERMODE_DRIVER=y
# CONFIG_BPF_PRELOAD is not set
# end of BPF subsystem
CONFIG_PREEMPT_VOLUNTARY_BUILD=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting
CONFIG_CPU_ISOLATION=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem
# CONFIG_IKCONFIG is not set
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=16
CONFIG_LOG_CPU_MAX_BUF_SHIFT=13
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
# CONFIG_PRINTK_INDEX is not set
#
# Scheduler features
#
# end of Scheduler features
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC10_NO_ARRAY_BOUNDS=y
CONFIG_CC_NO_ARRAY_BOUNDS=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
# CONFIG_CGROUP_FAVOR_DYNMODS is not set
CONFIG_MEMCG=y
CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
CONFIG_CGROUP_MISC=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_TIME_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
# CONFIG_RD_ZSTD is not set
# CONFIG_BOOT_CONFIG is not set
# CONFIG_INITRAMFS_PRESERVE_MTIME is not set
# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
# CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_SYSCTL=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_EXPERT=y
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
# CONFIG_SYSFS_SYSCALL is not set
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_ARCH_HAS_MEMBARRIER_CALLBACKS=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_KCMP=y
CONFIG_RSEQ=y
# CONFIG_DEBUG_RSEQ is not set
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# end of Kernel Performance Events And Counters
# CONFIG_PROFILING is not set
# end of General setup
CONFIG_PPC32=y
# CONFIG_PPC64 is not set
#
# Processor support
#
CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_PPC_BOOK3S_603 is not set
CONFIG_PPC_BOOK3S_604=y
# CONFIG_POWERPC_CPU is not set
# CONFIG_E300C2_CPU is not set
# CONFIG_E300C3_CPU is not set
CONFIG_G4_CPU=y
# CONFIG_TOOLCHAIN_DEFAULT_CPU is not set
CONFIG_TARGET_CPU_BOOL=y
CONFIG_TARGET_CPU="G4"
CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU_REGS=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_KUEP=y
CONFIG_PPC_KUAP=y
# CONFIG_PPC_KUAP_DEBUG is not set
CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_PMU_SYSFS is not set
CONFIG_PPC_PERF_CTRS=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
# end of Processor support
CONFIG_VDSO32=y
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_32BIT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MAX=17
CONFIG_ARCH_MMAP_RND_BITS_MIN=11
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_PANIC_TIMEOUT=40
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_TBSYNC=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PPC_MSI_BITMAP=y
#
# Platform support
#
# CONFIG_SCOM_DEBUGFS is not set
# CONFIG_PPC_CHRP is not set
# CONFIG_PPC_MPC512x is not set
# CONFIG_PPC_MPC52xx is not set
CONFIG_PPC_PMAC=y
CONFIG_PPC_PMAC32_PSURGE=y
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
CONFIG_KVM_GUEST=y
CONFIG_EPAPR_PARAVIRT=y
CONFIG_PPC_HASH_MMU_NATIVE=y
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_PPC_SMP_MUXED_IPI=y
CONFIG_MPIC=y
CONFIG_MPIC_MSGR=y
CONFIG_PPC_MPC106=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set
#
# CPU frequency scaling drivers
#
CONFIG_CPU_FREQ_PMAC=y
# end of CPU Frequency scaling
#
# CPUIdle driver
#
#
# CPU Idle
#
# CONFIG_CPU_IDLE is not set
# end of CPU Idle
# end of CPUIdle driver
CONFIG_TAU=y
# CONFIG_TAU_INT is not set
# CONFIG_TAU_AVERAGE is not set
# CONFIG_GEN_RTC is not set
# end of Platform support
#
# Kernel options
#
CONFIG_HIGHMEM=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
CONFIG_HOTPLUG_CPU=y
# CONFIG_PPC_QUEUED_SPINLOCKS is not set
CONFIG_ARCH_CPU_PROBE_RELEASE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_IRQ_ALL_CPUS=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_PPC_4K_PAGES=y
CONFIG_PAGE_SIZE_4KB=y
CONFIG_PPC_PAGE_SHIFT=12
CONFIG_THREAD_SHIFT=13
CONFIG_DATA_SHIFT=22
CONFIG_ARCH_FORCE_MAX_ORDER=11
CONFIG_CMDLINE=""
CONFIG_EXTRA_TARGETS=""
CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_APM_EMULATION=m
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
# CONFIG_ENERGY_MODEL is not set
# end of Kernel options
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
# CONFIG_FSL_LBC is not set
# end of Bus options
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xb0000000
# end of Advanced setup
# CONFIG_VIRTUALIZATION is not set
CONFIG_HAVE_LIVEPATCH=y
CONFIG_CPU_MITIGATIONS=y
#
# General architecture-dependent options
#
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_STATIC_CALL_SELFTEST is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_MMU_GATHER_PAGE_SIZE=y
CONFIG_MMU_GATHER_MERGE_VMAS=y
CONFIG_ARCH_WANT_IRQS_OFF_ACTIVATE_MM=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
# CONFIG_SECCOMP_CACHE_DEBUG is not set
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
# CONFIG_STACKPROTECTOR_STRONG is not set
CONFIG_LTO_NONE=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOC=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_ARCH_MMAP_RND_BITS=11
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_HAVE_ARCH_NVRAM_OPS=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND=y
CONFIG_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
# CONFIG_VMAP_STACK is not set
CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT=y
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
# CONFIG_STRICT_MODULE_RWX is not set
CONFIG_ARCH_HAS_PHYS_TO_DMA=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_HAVE_STATIC_CALL=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SPLIT_ARG64=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling
CONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not set
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODULE_UNLOAD_TAINT_TRACKING is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
CONFIG_MODPROBE_PATH="/sbin/modprobe"
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
CONFIG_BLK_CGROUP_RWSTAT=y
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_ICQ=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_ZONED is not set
# CONFIG_BLK_DEV_THROTTLING is not set
CONFIG_BLK_WBT=y
CONFIG_BLK_WBT_MQ=y
# CONFIG_BLK_CGROUP_IOLATENCY is not set
# CONFIG_BLK_CGROUP_IOCOST is not set
# CONFIG_BLK_CGROUP_IOPRIO is not set
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set
# CONFIG_BLK_INLINE_ENCRYPTION is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
CONFIG_BLK_MQ_STACKING=y
#
# IO Schedulers
#
# CONFIG_MQ_IOSCHED_DEADLINE is not set
# CONFIG_MQ_IOSCHED_KYBER is not set
CONFIG_IOSCHED_BFQ=y
CONFIG_BFQ_GROUP_IOSCHED=y
# CONFIG_BFQ_CGROUP_DEBUG is not set
# end of IO Schedulers
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#
CONFIG_ZPOOL=y
CONFIG_SWAP=y
CONFIG_ZSWAP=y
CONFIG_ZSWAP_DEFAULT_ON=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo"
# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD is not set
# CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set
CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC=y
CONFIG_ZSWAP_ZPOOL_DEFAULT="zsmalloc"
# CONFIG_ZBUD is not set
# CONFIG_Z3FOLD is not set
CONFIG_ZSMALLOC=y
# CONFIG_ZSMALLOC_STAT is not set
#
# SLAB allocator options
#
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_SLAB_MERGE_DEFAULT is not set
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLAB_FREELIST_HARDENED=y
# CONFIG_SLUB_STATS is not set
# CONFIG_SLUB_CPU_PARTIAL is not set
# end of SLAB allocator options
CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
# CONFIG_COMPAT_BRK is not set
CONFIG_FLATMEM=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_ARCH_KEEP_MEMBLOCK=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_BOUNCE=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=16384
CONFIG_FRONTSWAP=y
# CONFIG_CMA is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ZONE_DMA=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_KMAP_LOCAL=y
# CONFIG_ANON_VMA_NAME is not set
CONFIG_USERFAULTFD=y
CONFIG_LRU_GEN=y
CONFIG_LRU_GEN_ENABLED=y
# CONFIG_LRU_GEN_STATS is not set
CONFIG_LOCK_MM_AND_FIND_VMA=y
#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options
CONFIG_NET=y
CONFIG_SKB_EXTENSIONS=y
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
CONFIG_UNIX_DIAG=m
CONFIG_TLS=m
CONFIG_TLS_DEVICE=y
# CONFIG_TLS_TOE is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=m
CONFIG_XFRM_USER=m
# CONFIG_XFRM_INTERFACE is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_AH=m
CONFIG_XFRM_ESP=m
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
# CONFIG_XDP_SOCKETS is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=m
CONFIG_SYN_COOKIES=y
# CONFIG_NET_IPVTI is not set
CONFIG_NET_UDP_TUNNEL=m
# CONFIG_NET_FOU is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
# CONFIG_INET_ESP_OFFLOAD is not set
# CONFIG_INET_ESPINTCP is not set
CONFIG_INET_IPCOMP=m
CONFIG_INET_TABLE_PERTURB_ORDER=16
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
# CONFIG_TCP_CONG_CUBIC is not set
CONFIG_TCP_CONG_WESTWOOD=y
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_NV is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_TCP_CONG_DCTCP is not set
# CONFIG_TCP_CONG_CDG is not set
# CONFIG_TCP_CONG_BBR is not set
CONFIG_DEFAULT_WESTWOOD=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="westwood"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
# CONFIG_INET6_ESP_OFFLOAD is not set
# CONFIG_INET6_ESPINTCP is not set
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
# CONFIG_IPV6_VTI is not set
# CONFIG_IPV6_SIT is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_IPV6_RPL_LWTUNNEL is not set
# CONFIG_IPV6_IOAM6_LWTUNNEL is not set
# CONFIG_NETLABEL is not set
# CONFIG_MPTCP is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
CONFIG_BPFILTER=y
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_COOKIE_HMAC_SHA1 is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_BRIDGE_MRP is not set
# CONFIG_BRIDGE_CFM is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_CBS is not set
# CONFIG_NET_SCH_ETF is not set
# CONFIG_NET_SCH_TAPRIO is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_SKBPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
# CONFIG_NET_SCH_CODEL is not set
CONFIG_NET_SCH_FQ_CODEL=y
# CONFIG_NET_SCH_CAKE is not set
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
# CONFIG_NET_SCH_PLUG is not set
# CONFIG_NET_SCH_ETS is not set
CONFIG_NET_SCH_DEFAULT=y
CONFIG_DEFAULT_FQ_CODEL=y
# CONFIG_DEFAULT_PFIFO_FAST is not set
CONFIG_DEFAULT_NET_SCH="fq_codel"
#
# Classification
#
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_CLS_CGROUP is not set
# CONFIG_NET_CLS_BPF is not set
# CONFIG_NET_CLS_FLOWER is not set
# CONFIG_NET_CLS_MATCHALL is not set
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
CONFIG_VSOCKETS=m
CONFIG_VSOCKETS_DIAG=m
# CONFIG_VSOCKETS_LOOPBACK is not set
# CONFIG_VIRTIO_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_NET_NSH is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_QRTR is not set
# CONFIG_NET_NCSI is not set
CONFIG_PCPU_DEV_REFCNT=y
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_STREAM_PARSER=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# end of Network testing
# end of Networking options
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_STREAM_PARSER=y
# CONFIG_MCTP is not set
# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_FD=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_SOCK_VALIDATE_XMIT=y
CONFIG_NET_SOCK_MSG=y
CONFIG_PAGE_POOL=y
# CONFIG_PAGE_POOL_STATS is not set
CONFIG_FAILOVER=y
CONFIG_ETHTOOL_NETLINK=y
#
# Device Drivers
#
CONFIG_HAVE_PCI=y
CONFIG_FORCE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCIEASPM is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_MSI_ARCH_FALLBACKS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
# CONFIG_PCIE_BUS_TUNE_OFF is not set
CONFIG_PCIE_BUS_DEFAULT=y
# CONFIG_PCIE_BUS_SAFE is not set
# CONFIG_PCIE_BUS_PERFORMANCE is not set
# CONFIG_PCIE_BUS_PEER2PEER is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=4
# CONFIG_HOTPLUG_PCI is not set
#
# PCI controller drivers
#
# CONFIG_PCI_FTPCI100 is not set
# CONFIG_PCI_HOST_GENERIC is not set
# CONFIG_PCIE_XILINX is not set
# CONFIG_PCIE_MICROCHIP_HOST is not set
#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT_HOST is not set
# CONFIG_PCI_MESON is not set
# end of DesignWare PCI Core Support
#
# Mobiveil PCIe Core Support
#
# end of Mobiveil PCIe Core Support
#
# Cadence PCIe controllers support
#
# CONFIG_PCIE_CADENCE_PLAT_HOST is not set
# CONFIG_PCI_J721E_HOST is not set
# end of Cadence PCIe controllers support
# end of PCI controller drivers
#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint
#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers
# CONFIG_CXL_BUS is not set
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set
#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_DEVTMPFS_SAFE=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
CONFIG_FW_LOADER_COMPRESS=y
# CONFIG_FW_LOADER_COMPRESS_XZ is not set
CONFIG_FW_LOADER_COMPRESS_ZSTD=y
# CONFIG_FW_UPLOAD is not set
# end of Firmware loader
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_DMA_FENCE_TRACE=y
# end of Generic Driver Options
#
# Bus devices
#
# CONFIG_MHI_BUS is not set
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
#
# Firmware Drivers
#
#
# ARM System Control and Management Interface Protocol
#
# end of ARM System Control and Management Interface Protocol
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_FW_CFG_SYSFS=m
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers
# CONFIG_GNSS is not set
# CONFIG_MTD is not set
CONFIG_DTC=y
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
# CONFIG_OF_OVERLAY is not set
CONFIG_OF_DMA_DEFAULT_COHERENT=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_FD is not set
# CONFIG_MAC_FLOPPY is not set
CONFIG_CDROM=y
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_ZRAM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_UBLK is not set
#
# NVME Support
#
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_NVME_FC is not set
# CONFIG_NVME_TCP is not set
# CONFIG_NVME_TARGET is not set
# end of NVME Support
#
# Misc devices
#
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_PHANTOM is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_SRAM is not set
# CONFIG_DW_XDATA_PCIE is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
# CONFIG_OPEN_DICE is not set
# CONFIG_VCPU_STALL_DETECTOR is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support
# CONFIG_CB710_CORE is not set
#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline
# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_ALTERA_STAPL is not set
# CONFIG_ECHO is not set
# CONFIG_BCM_VK is not set
# CONFIG_MISC_ALCOR_PCI is not set
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_MISC_RTSX_USB is not set
# CONFIG_HABANA_AI is not set
CONFIG_PVPANIC=y
CONFIG_PVPANIC_MMIO=m
CONFIG_PVPANIC_PCI=m
# end of Misc devices
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=m
CONFIG_BLK_DEV_BSG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# end of SCSI Transports
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_MPI3MR is not set
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FDOMAIN_PCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_WD719X is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_MESH is not set
# CONFIG_SCSI_MAC53C94 is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
CONFIG_SCSI_VIRTIO=y
# CONFIG_SCSI_DH is not set
# end of SCSI device support
CONFIG_ATA=y
CONFIG_SATA_HOST=y
CONFIG_ATA_VERBOSE_ERROR=y
# CONFIG_ATA_FORCE is not set
# CONFIG_SATA_PMP is not set
#
# Controllers with non-SFF native interface
#
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_AHCI_DWC is not set
# CONFIG_AHCI_CEVA is not set
# CONFIG_AHCI_QORIQ is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
CONFIG_SATA_SIL=y
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
CONFIG_PATA_MACIO=y
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OF_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=m
CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING=y
# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_UNSTRIPED is not set
CONFIG_DM_CRYPT=m
# CONFIG_DM_SNAPSHOT is not set
CONFIG_DM_THIN_PROVISIONING=m
# CONFIG_DM_CACHE is not set
# CONFIG_DM_WRITECACHE is not set
# CONFIG_DM_ERA is not set
# CONFIG_DM_CLONE is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_RAID is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_DUST is not set
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_DM_LOG_WRITES is not set
# CONFIG_DM_INTEGRITY is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_ADB=y
# CONFIG_ADB_CUDA is not set
CONFIG_ADB_PMU=y
CONFIG_ADB_PMU_EVENT=y
CONFIG_ADB_PMU_LED=y
# CONFIG_ADB_PMU_LED_DISK is not set
CONFIG_PMAC_APM_EMU=m
CONFIG_PMAC_MEDIABAY=y
# CONFIG_PMAC_BACKLIGHT is not set
CONFIG_INPUT_ADBHID=y
CONFIG_MAC_EMUMOUSEBTN=m
CONFIG_THERM_WINDTUNNEL=m
CONFIG_THERM_ADT746X=m
CONFIG_WINDFARM=m
# CONFIG_PMAC_RACKMETER is not set
CONFIG_SENSORS_AMS=m
CONFIG_SENSORS_AMS_PMU=y
CONFIG_SENSORS_AMS_I2C=y
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_WIREGUARD is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_GENEVE is not set
# CONFIG_BAREUDP is not set
# CONFIG_GTP is not set
# CONFIG_MACSEC is not set
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
CONFIG_VIRTIO_NET=y
# CONFIG_NLMON is not set
CONFIG_SUNGEM_PHY=y
# CONFIG_ARCNET is not set
CONFIG_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_AGERE is not set
# CONFIG_NET_VENDOR_ALACRITECH is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
# CONFIG_NET_VENDOR_AMAZON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_APPLE is not set
# CONFIG_NET_VENDOR_AQUANTIA is not set
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_ASIX is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CADENCE is not set
# CONFIG_NET_VENDOR_CAVIUM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_NET_VENDOR_CORTINA is not set
# CONFIG_NET_VENDOR_DAVICOM is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_ENGLEDER is not set
# CONFIG_NET_VENDOR_EZCHIP is not set
# CONFIG_NET_VENDOR_FUNGIBLE is not set
# CONFIG_NET_VENDOR_GOOGLE is not set
# CONFIG_NET_VENDOR_HUAWEI is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_JME is not set
# CONFIG_NET_VENDOR_LITEX is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_MICROSEMI is not set
# CONFIG_NET_VENDOR_MICROSOFT is not set
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NI is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NETERION is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_VENDOR_PACKET_ENGINES is not set
# CONFIG_NET_VENDOR_PENSANDO is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
# CONFIG_NET_VENDOR_BROCADE is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_RDC is not set
# CONFIG_NET_VENDOR_REALTEK is not set
# CONFIG_NET_VENDOR_RENESAS is not set
# CONFIG_NET_VENDOR_ROCKER is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_NET_VENDOR_SOLARFLARE is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_SOCIONEXT is not set
# CONFIG_NET_VENDOR_STMICRO is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
CONFIG_SUNGEM=y
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VERTEXCOM is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WANGXUN is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_NET_VENDOR_XILINX is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PHYLIB is not set
# CONFIG_PSE_CONTROLLER is not set
# CONFIG_MDIO_DEVICE is not set
#
# PCS device drivers
#
# end of PCS device drivers
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_USB_NET_DRIVERS is not set
# CONFIG_WLAN is not set
# CONFIG_WAN is not set
#
# Wireless WAN
#
# CONFIG_WWAN is not set
# end of Wireless WAN
# CONFIG_VMXNET3 is not set
# CONFIG_NETDEVSIM is not set
CONFIG_NET_FAILOVER=y
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
# CONFIG_INPUT_APMPOWER is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_APPLETOUCH=m
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_AS5011 is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
CONFIG_JOYSTICK_XPAD=m
# CONFIG_JOYSTICK_XPAD_FF is not set
CONFIG_JOYSTICK_XPAD_LEDS=y
# CONFIG_JOYSTICK_PXRC is not set
# CONFIG_JOYSTICK_QWIIC is not set
# CONFIG_JOYSTICK_FSIA6B is not set
# CONFIG_JOYSTICK_SENSEHAT is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_ATMEL_CAPTOUCH is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_DA7280_HAPTICS is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_IQS269A is not set
# CONFIG_INPUT_IQS626A is not set
# CONFIG_INPUT_IQS7222 is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_RMI4_CORE is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_LDISC_AUTOLOAD=y
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
# CONFIG_SERIAL_8250_16550A_VARIANTS is not set
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
# CONFIG_SERIAL_8250_EXAR is not set
CONFIG_SERIAL_8250_NR_UARTS=8
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_8250_FSL=y
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
# CONFIG_SERIAL_8250_PERICOM is not set
CONFIG_SERIAL_OF_PLATFORM=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_PMACZILOG is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SIFIVE is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
# end of Serial drivers
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_PPC_EPAPR_HV_BYTECHAN is not set
# CONFIG_N_GSM is not set
# CONFIG_NOZOMI is not set
# CONFIG_NULL_TTY is not set
CONFIG_HVC_DRIVER=y
# CONFIG_HVC_UDBG is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_BA431 is not set
CONFIG_HW_RANDOM_VIRTIO=m
# CONFIG_HW_RANDOM_CCTRNG is not set
# CONFIG_HW_RANDOM_XIPHERA is not set
# CONFIG_APPLICOM is not set
CONFIG_DEVMEM=y
CONFIG_NVRAM=m
CONFIG_DEVPORT=y
# CONFIG_TCG_TPM is not set
# CONFIG_XILLYBUS is not set
# CONFIG_XILLYUSB is not set
CONFIG_RANDOM_TRUST_CPU=y
CONFIG_RANDOM_TRUST_BOOTLOADER=y
# end of Character devices
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=m
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_NVIDIA_GPU is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# Mac SMBus host controller drivers
#
CONFIG_I2C_POWERMAC=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_MPC is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_CP2615 is not set
# CONFIG_I2C_PCI1XXXX is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_VIRTIO is not set
# end of I2C Hardware Bus support
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support
# CONFIG_I3C is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
# CONFIG_PPS is not set
#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support
# CONFIG_PINCTRL is not set
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
CONFIG_APM_POWER=m
# CONFIG_IP5XXX_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_CW2015 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
CONFIG_BATTERY_PMU=m
# CONFIG_BATTERY_SAMSUNG_SDI is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_LTC4162L is not set
# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
# CONFIG_CHARGER_MAX77976 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_BATTERY_GOLDFISH is not set
# CONFIG_BATTERY_RT5033 is not set
# CONFIG_CHARGER_BD99954 is not set
# CONFIG_BATTERY_UG3105 is not set
CONFIG_HWMON=m
CONFIG_HWMON_DEBUG_CHIP=y
#
# Native drivers
#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM1177 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_AHT10 is not set
# CONFIG_SENSORS_AQUACOMPUTER_D5NEXT is not set
# CONFIG_SENSORS_AS370 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_AXI_FAN_CONTROL is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_CORSAIR_CPRO is not set
# CONFIG_SENSORS_CORSAIR_PSU is not set
CONFIG_SENSORS_DRIVETEMP=m
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2947_I2C is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_MAX127 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX31730 is not set
# CONFIG_SENSORS_MAX31760 is not set
# CONFIG_SENSORS_MAX6620 is not set
# CONFIG_SENSORS_MAX6621 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_TPS23861 is not set
# CONFIG_SENSORS_MR75203 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_NCT6775_I2C is not set
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NPCM7XX is not set
# CONFIG_SENSORS_NZXT_KRAKEN2 is not set
# CONFIG_SENSORS_NZXT_SMART2 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SBTSI is not set
# CONFIG_SENSORS_SBRMI is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHT4x is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC2305 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA238 is not set
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_TMP464 is not set
# CONFIG_SENSORS_TMP513 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83773G is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_ACT8945A is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_AS3722 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_GATEWORKS_GSC is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_MP2629 is not set
# CONFIG_MFD_HI6421_PMIC is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_IQS62X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77620 is not set
# CONFIG_MFD_MAX77650 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77714 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6370 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_NTXEC is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_SY7636A is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT4831 is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RT5120 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_RK808 is not set
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TI_LP87565 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_LOCHNAGAR is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_ROHM_BD718XX is not set
# CONFIG_MFD_ROHM_BD71828 is not set
# CONFIG_MFD_ROHM_BD957XMUF is not set
# CONFIG_MFD_STPMIC1 is not set
# CONFIG_MFD_STMFX is not set
# CONFIG_MFD_ATC260X_I2C is not set
# CONFIG_MFD_QCOM_PM8008 is not set
# CONFIG_MFD_RSMU_I2C is not set
# end of Multifunction device drivers
# CONFIG_REGULATOR is not set
# CONFIG_RC_CORE is not set
#
# CEC support
#
# CONFIG_MEDIA_CEC_SUPPORT is not set
# end of CEC support
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_APERTURE_HELPERS=y
# CONFIG_AGP is not set
CONFIG_DRM=y
# CONFIG_DRM_DEBUG_MM is not set
CONFIG_DRM_KMS_HELPER=m
# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set
CONFIG_DRM_DEBUG_MODESET_LOCK=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_DISPLAY_HELPER=m
CONFIG_DRM_DISPLAY_DP_HELPER=y
# CONFIG_DRM_DP_AUX_CHARDEV is not set
# CONFIG_DRM_DP_CEC is not set
CONFIG_DRM_TTM=m
CONFIG_DRM_VRAM_HELPER=m
CONFIG_DRM_TTM_HELPER=m
CONFIG_DRM_GEM_SHMEM_HELPER=m
#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# end of I2C encoder or helper chips
#
# ARM devices
#
# end of ARM devices
CONFIG_DRM_RADEON=m
CONFIG_DRM_RADEON_USERPTR=y
# CONFIG_DRM_AMDGPU is not set
# CONFIG_DRM_NOUVEAU is not set
CONFIG_DRM_VGEM=m
# CONFIG_DRM_VKMS is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_RCAR_DW_HDMI is not set
# CONFIG_DRM_RCAR_USE_LVDS is not set
# CONFIG_DRM_RCAR_USE_MIPI_DSI is not set
# CONFIG_DRM_QXL is not set
CONFIG_DRM_VIRTIO_GPU=m
CONFIG_DRM_PANEL=y
#
# Display Panels
#
# CONFIG_DRM_PANEL_LVDS is not set
# CONFIG_DRM_PANEL_SIMPLE is not set
# CONFIG_DRM_PANEL_EDP is not set
# CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO is not set
# CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E63M0 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set
# CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set
# end of Display Panels
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y
#
# Display Interface Bridges
#
# CONFIG_DRM_CDNS_DSI is not set
# CONFIG_DRM_CHIPONE_ICN6211 is not set
# CONFIG_DRM_CHRONTEL_CH7033 is not set
# CONFIG_DRM_DISPLAY_CONNECTOR is not set
# CONFIG_DRM_ITE_IT6505 is not set
# CONFIG_DRM_LONTIUM_LT8912B is not set
# CONFIG_DRM_LONTIUM_LT9211 is not set
# CONFIG_DRM_LONTIUM_LT9611 is not set
# CONFIG_DRM_LONTIUM_LT9611UXC is not set
# CONFIG_DRM_ITE_IT66121 is not set
# CONFIG_DRM_LVDS_CODEC is not set
# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set
# CONFIG_DRM_NXP_PTN3460 is not set
# CONFIG_DRM_PARADE_PS8622 is not set
# CONFIG_DRM_PARADE_PS8640 is not set
# CONFIG_DRM_SIL_SII8620 is not set
# CONFIG_DRM_SII902X is not set
# CONFIG_DRM_SII9234 is not set
# CONFIG_DRM_SIMPLE_BRIDGE is not set
# CONFIG_DRM_THINE_THC63LVD1024 is not set
# CONFIG_DRM_TOSHIBA_TC358762 is not set
# CONFIG_DRM_TOSHIBA_TC358764 is not set
# CONFIG_DRM_TOSHIBA_TC358767 is not set
# CONFIG_DRM_TOSHIBA_TC358768 is not set
# CONFIG_DRM_TOSHIBA_TC358775 is not set
# CONFIG_DRM_TI_DLPC3433 is not set
# CONFIG_DRM_TI_TFP410 is not set
# CONFIG_DRM_TI_SN65DSI83 is not set
# CONFIG_DRM_TI_SN65DSI86 is not set
# CONFIG_DRM_TI_TPD12S015 is not set
# CONFIG_DRM_ANALOGIX_ANX6345 is not set
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_ANALOGIX_ANX7625 is not set
# CONFIG_DRM_I2C_ADV7511 is not set
# CONFIG_DRM_CDNS_MHDP8546 is not set
# end of Display Interface Bridges
# CONFIG_DRM_ETNAVIV is not set
# CONFIG_DRM_LOGICVC is not set
# CONFIG_DRM_ARCPGU is not set
CONFIG_DRM_BOCHS=m
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_GM12U320 is not set
# CONFIG_DRM_SIMPLEDRM is not set
# CONFIG_DRM_GUD is not set
# CONFIG_DRM_SSD130X is not set
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
CONFIG_DRM_NOMODESET=y
#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_MACMODES=y
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_OF=y
# CONFIG_FB_CONTROL is not set
# CONFIG_FB_PLATINUM is not set
# CONFIG_FB_VALKYRIE is not set
CONFIG_FB_CT65550=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SM712 is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=m
# CONFIG_BACKLIGHT_QCOM_WLED is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
CONFIG_BACKLIGHT_LED=m
# end of Backlight & LCD device support
CONFIG_HDMI=y
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION is not set
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
# end of Console display driver support
# CONFIG_LOGO is not set
# end of Graphics support
# CONFIG_SOUND is not set
#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACCUTOUCH is not set
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=y
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_ASUS is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_BIGBEN_FF is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_MACALLY is not set
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CREATIVE_SB0540 is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELAN is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_FT260 is not set
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_GLORIOUS is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_VIVALDI is not set
# CONFIG_HID_GT683R is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
CONFIG_HID_UCLOGIC=m
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_VRC2 is not set
# CONFIG_HID_XIAOMI is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_ITE is not set
# CONFIG_HID_JABRA is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LED is not set
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_LETSKETCH is not set
# CONFIG_HID_LOGITECH is not set
CONFIG_HID_MAGICMOUSE=y
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_MEGAWORLD_FF is not set
# CONFIG_HID_REDRAGON is not set
CONFIG_HID_MICROSOFT=m
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
CONFIG_HID_NINTENDO=m
# CONFIG_NINTENDO_FF is not set
# CONFIG_HID_NTI is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PENMOUNT is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PXRC is not set
# CONFIG_HID_RAZER is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_RETRODE is not set
CONFIG_HID_ROCCAT=m
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SEMITEK is not set
# CONFIG_HID_SIGMAMICRO is not set
CONFIG_HID_SONY=m
# CONFIG_SONY_FF is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEAM is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_TOPRE is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_U2FZERO is not set
# CONFIG_HID_WACOM is not set
CONFIG_HID_WIIMOTE=m
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set
# end of Special HID drivers
#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
# end of USB HID support
#
# I2C HID support
#
# CONFIG_I2C_HID_OF is not set
# CONFIG_I2C_HID_OF_ELAN is not set
# CONFIG_I2C_HID_OF_GOODIX is not set
# end of I2C HID support
# end of HID support
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_FEW_INIT_RETRIES is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_PRODUCTLIST is not set
# CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB is not set
# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_MON=m
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_XPS_USB_HCD_XILINX is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=m
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
CONFIG_USB_UAS=m
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_CDNS_SUPPORT is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set
#
# USB port drivers
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_SIMPLE is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_F8153X is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MXUPORT is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_XSENS_MT is not set
# CONFIG_USB_SERIAL_WISHBONE is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_QT2 is not set
# CONFIG_USB_SERIAL_UPD78F0730 is not set
# CONFIG_USB_SERIAL_XR is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
CONFIG_USB_APPLEDISPLAY=m
# CONFIG_APPLE_MFI_FASTCHARGE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
CONFIG_USB_ISIGHTFW=m
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HUB_USB251XB is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
# CONFIG_USB_ONBOARD_HUB is not set
#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_ISP1301 is not set
# end of USB Physical Layer drivers
# CONFIG_USB_GADGET is not set
# CONFIG_TYPEC is not set
# CONFIG_USB_ROLE_SWITCH is not set
# CONFIG_MMC is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_CLASS_MULTICOLOR is not set
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
#
# LED drivers
#
# CONFIG_LEDS_AN30259A is not set
# CONFIG_LEDS_AW2013 is not set
# CONFIG_LEDS_BCM6328 is not set
# CONFIG_LEDS_BCM6358 is not set
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3532 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_LM3692X is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP55XX_COMMON is not set
# CONFIG_LEDS_LP8860 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_IS31FL319X is not set
# CONFIG_LEDS_IS31FL32XX is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_TI_LMU_COMMON is not set
#
# Flash and Torch LED drivers
#
#
# RGB LED drivers
#
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
CONFIG_LEDS_TRIGGER_DISK=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_LEDS_TRIGGER_CAMERA is not set
CONFIG_LEDS_TRIGGER_PANIC=y
# CONFIG_LEDS_TRIGGER_NETDEV is not set
# CONFIG_LEDS_TRIGGER_PATTERN is not set
# CONFIG_LEDS_TRIGGER_AUDIO is not set
# CONFIG_LEDS_TRIGGER_TTY is not set
#
# Simple LED drivers
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABEOZ9 is not set
# CONFIG_RTC_DRV_ABX80X is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_HYM8563 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_NCT3018Y is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_ISL12026 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3028 is not set
# CONFIG_RTC_DRV_RV3032 is not set
# CONFIG_RTC_DRV_RV8803 is not set
# CONFIG_RTC_DRV_SD3078 is not set
#
# SPI RTC drivers
#
CONFIG_RTC_I2C_AND_SPI=y
#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
# CONFIG_RTC_DRV_RX6110 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_ZYNQMP is not set
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_GENERIC=y
# CONFIG_RTC_DRV_CADENCE is not set
# CONFIG_RTC_DRV_FTRTC010 is not set
# CONFIG_RTC_DRV_R7301 is not set
#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_GOLDFISH is not set
# CONFIG_DMADEVICES is not set
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
CONFIG_UDMABUF=y
# CONFIG_DMABUF_MOVE_NOTIFY is not set
CONFIG_DMABUF_DEBUG=y
CONFIG_DMABUF_SELFTESTS=m
CONFIG_DMABUF_HEAPS=y
# CONFIG_DMABUF_SYSFS_STATS is not set
CONFIG_DMABUF_HEAPS_SYSTEM=y
# end of DMABUF options
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_PCI_LIB=y
CONFIG_VIRTIO_PCI_LIB_LEGACY=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VIRTIO_INPUT is not set
# CONFIG_VIRTIO_MMIO is not set
CONFIG_VIRTIO_DMA_SHARED_BUFFER=m
# CONFIG_VDPA is not set
CONFIG_VHOST_IOTLB=m
CONFIG_VHOST=m
CONFIG_VHOST_MENU=y
CONFIG_VHOST_NET=m
# CONFIG_VHOST_VSOCK is not set
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support
# CONFIG_GREYBUS is not set
# CONFIG_COMEDI is not set
# CONFIG_STAGING is not set
# CONFIG_GOLDFISH is not set
# CONFIG_COMMON_CLK is not set
# CONFIG_HWSPINLOCK is not set
#
# Clock Source drivers
#
# CONFIG_MICROCHIP_PIT64B is not set
# end of Clock Source drivers
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
# end of Generic IOMMU Pagetable Support
# CONFIG_IOMMU_DEBUGFS is not set
#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers
#
# Rpmsg drivers
#
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers
# CONFIG_SOUNDWIRE is not set
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers
#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# CONFIG_QUICC_ENGINE is not set
# end of NXP/Freescale QorIQ SoC drivers
#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers
#
# i.MX SoC drivers
#
# end of i.MX SoC drivers
#
# Enable LiteX SoC Builder specific drivers
#
# CONFIG_LITEX_SOC_CONTROLLER is not set
# end of Enable LiteX SoC Builder specific drivers
#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers
# CONFIG_SOC_TI is not set
#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_PWM is not set
#
# IRQ chip support
#
CONFIG_IRQCHIP=y
# CONFIG_AL_FIC is not set
# CONFIG_XILINX_INTC is not set
# end of IRQ chip support
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_PHY_CAN_TRANSCEIVER is not set
#
# PHY drivers for Broadcom platforms
#
# CONFIG_BCM_KONA_USB2_PHY is not set
# end of PHY drivers for Broadcom platforms
# CONFIG_PHY_CADENCE_DPHY is not set
# CONFIG_PHY_CADENCE_DPHY_RX is not set
# CONFIG_PHY_CADENCE_SALVO is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# end of PHY Subsystem
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
#
# Performance monitor support
#
# end of Performance monitor support
# CONFIG_RAS is not set
# CONFIG_USB4 is not set
#
# Android
#
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android
# CONFIG_DAX is not set
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
# CONFIG_NVMEM_RMEM is not set
#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# end of HW tracing support
# CONFIG_FPGA is not set
# CONFIG_FSI is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# CONFIG_MOST is not set
# CONFIG_PECI is not set
# CONFIG_HTE is not set
# end of Device Drivers
#
# File systems
#
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_SUPPORT_V4 is not set
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_ONLINE_SCRUB is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_FS_REF_VERIFY is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=m
# CONFIG_CUSE is not set
CONFIG_VIRTIO_FS=m
# CONFIG_OVERLAY_FS is not set
#
# Caches
#
CONFIG_NETFS_SUPPORT=y
# CONFIG_NETFS_STATS is not set
# CONFIG_FSCACHE is not set
# end of Caches
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
CONFIG_FAT_DEFAULT_UTF8=y
CONFIG_EXFAT_FS=m
CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8"
# CONFIG_NTFS_FS is not set
CONFIG_NTFS3_FS=m
CONFIG_NTFS3_LZX_XPRESS=y
# CONFIG_NTFS3_FS_POSIX_ACL is not set
# end of DOS/FAT/EXFAT/NT Filesystems
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_MEMFD_CREATE=y
CONFIG_CONFIGFS_FS=m
# end of Pseudo filesystems
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
# CONFIG_ECRYPT_FS is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
CONFIG_BEFS_DEBUG=y
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EROFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
# CONFIG_NFS_V2 is not set
# CONFIG_NFS_V3 is not set
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
CONFIG_NFS_V4_SECURITY_LABEL=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFS_DISABLE_UDP_SUPPORT=y
# CONFIG_NFS_V4_2_READ_PLUS is not set
# CONFIG_NFSD is not set
CONFIG_GRACE_PERIOD=m
CONFIG_LOCKD=m
CONFIG_NFS_COMMON=y
CONFIG_NFS_V4_2_SSC_HELPER=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
CONFIG_SUNRPC_DEBUG=y
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
# CONFIG_CIFS_UPCALL is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_SWN_UPCALL=y
# CONFIG_SMB_SERVER is not set
CONFIG_SMBFS=m
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=y
CONFIG_9P_FS_POSIX_ACL=y
# CONFIG_9P_FS_SECURITY is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=m
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_MAC_ROMAN=m
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
CONFIG_UNICODE=m
# CONFIG_UNICODE_NORMALIZATION_SELFTEST is not set
CONFIG_IO_WQ=y
# end of File systems
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_REQUEST_CACHE=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_TRUSTED_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
CONFIG_KEY_DH_OPERATIONS=y
CONFIG_KEY_NOTIFICATIONS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_PATH is not set
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_FORTIFY_SOURCE=y
# CONFIG_STATIC_USERMODEHELPER is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_LOADPIN is not set
CONFIG_SECURITY_YAMA=y
# CONFIG_SECURITY_SAFESETID is not set
# CONFIG_SECURITY_LOCKDOWN_LSM is not set
# CONFIG_SECURITY_LANDLOCK is not set
# CONFIG_INTEGRITY is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
# CONFIG_INIT_STACK_NONE is not set
CONFIG_INIT_STACK_ALL_PATTERN=y
# CONFIG_INIT_STACK_ALL_ZERO is not set
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
# CONFIG_ZERO_CALL_USED_REGS is not set
# end of Memory initialization
CONFIG_RANDSTRUCT_NONE=y
# end of Kernel hardening options
# end of Security options
CONFIG_XOR_BLOCKS=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=m
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=m
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
# CONFIG_CRYPTO_MANAGER_EXTRA_TESTS is not set
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_ENGINE=m
# end of Crypto core or helper
#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=m
CONFIG_CRYPTO_DH=y
# CONFIG_CRYPTO_DH_RFC7919_GROUPS is not set
CONFIG_CRYPTO_ECC=m
CONFIG_CRYPTO_ECDH=m
# CONFIG_CRYPTO_ECDSA is not set
# CONFIG_CRYPTO_ECRDSA is not set
# CONFIG_CRYPTO_SM2 is not set
# CONFIG_CRYPTO_CURVE25519 is not set
# end of Public-key cryptography
#
# Block ciphers
#
CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_AES_TI is not set
# CONFIG_CRYPTO_ARIA is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SM4_GENERIC is not set
# CONFIG_CRYPTO_TWOFISH is not set
# end of Block ciphers
#
# Length-preserving ciphers and modes
#
# CONFIG_CRYPTO_ADIANTUM is not set
# CONFIG_CRYPTO_CHACHA20 is not set
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=m
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_HCTR2 is not set
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_OFB is not set
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=m
# end of Length-preserving ciphers and modes
#
# AEAD (authenticated encryption with associated data) ciphers
#
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_ECHAINIV=m
CONFIG_CRYPTO_ESSIV=m
# end of AEAD (authenticated encryption with associated data) ciphers
#
# Hashes, digests, and MACs
#
CONFIG_CRYPTO_BLAKE2B=y
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_SHA3=m
# CONFIG_CRYPTO_SM3_GENERIC is not set
# CONFIG_CRYPTO_STREEBOG is not set
# CONFIG_CRYPTO_VMAC is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_XXHASH=y
# end of Hashes, digests, and MACs
#
# CRCs (cyclic redundancy checks)
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRCT10DIF is not set
# end of CRCs (cyclic redundancy checks)
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
# CONFIG_CRYPTO_ZSTD is not set
# end of Compression
#
# Random number generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DRBG_MENU=m
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=m
CONFIG_CRYPTO_JITTERENTROPY=m
CONFIG_CRYPTO_KDF800108_CTR=y
# end of Random number generation
#
# Userspace interface
#
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_USER_API_RNG=m
# CONFIG_CRYPTO_USER_API_RNG_CAVP is not set
CONFIG_CRYPTO_USER_API_AEAD=m
# CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE is not set
# CONFIG_CRYPTO_STATS is not set
# end of Userspace interface
CONFIG_CRYPTO_HASH_INFO=y
#
# Accelerated Cryptographic Algorithms for CPU (powerpc)
#
CONFIG_CRYPTO_MD5_PPC=m
CONFIG_CRYPTO_SHA1_PPC=m
# end of Accelerated Cryptographic Algorithms for CPU (powerpc)
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
CONFIG_CRYPTO_DEV_VIRTIO=m
# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
# CONFIG_CRYPTO_DEV_CCREE is not set
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_FIPS_SIGNATURE_SELFTEST is not set
#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
# end of Certificates for signature checking
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_RAID6_PQ_BENCHMARK=y
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
# CONFIG_CORDIC is not set
# CONFIG_PRIME_NUMBERS is not set
CONFIG_GENERIC_PCI_IOMAP=y
#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LIB_AES=m
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=m
CONFIG_CRYPTO_LIB_CHACHA=m
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=m
CONFIG_CRYPTO_LIB_CURVE25519=m
CONFIG_CRYPTO_LIB_DES=m
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=m
CONFIG_CRYPTO_LIB_POLY1305=m
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=m
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC64_ROCKSOFT is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC64 is not set
# CONFIG_CRC4 is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_ZSTD_COMMON=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
# CONFIG_XZ_DEC is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_DMA_DECLARE_COHERENT=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
# CONFIG_FORCE_NR_CPUS is not set
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_CLZ_TAB=y
# CONFIG_IRQ_POLL is not set
CONFIG_MPILIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_SBITMAP=y
# end of Library routines
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DYNAMIC_DEBUG_CORE is not set
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_MISC is not set
#
# Compile-time checks and compiler options
#
CONFIG_AS_HAS_NON_CONST_LEB128=y
CONFIG_DEBUG_INFO_NONE=y
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_DWARF5 is not set
CONFIG_FRAME_WARN=1024
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B is not set
# CONFIG_VMLINUX_MAP is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
CONFIG_HAVE_KCSAN_COMPILER=y
# end of Generic Kernel Debugging Instruments
#
# Networking Debugging
#
# CONFIG_NET_DEV_REFCNT_TRACKER is not set
# CONFIG_NET_NS_REFCNT_TRACKER is not set
# CONFIG_DEBUG_NET is not set
# end of Networking Debugging
#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_DEBUG_PAGEALLOC=y
# CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT is not set
CONFIG_SLUB_DEBUG=y
# CONFIG_SLUB_DEBUG_ON is not set
CONFIG_PAGE_OWNER=y
CONFIG_PAGE_POISONING=y
CONFIG_DEBUG_RODATA_TEST=y
CONFIG_ARCH_HAS_DEBUG_WX=y
CONFIG_DEBUG_WX=y
CONFIG_GENERIC_PTDUMP=y
CONFIG_PTDUMP_CORE=y
# CONFIG_PTDUMP_DEBUGFS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SHRINKER_DEBUG is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_VM_PGTABLE=y
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_DEBUG_KMAP_LOCAL is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# CONFIG_KASAN is not set
CONFIG_HAVE_ARCH_KFENCE=y
# CONFIG_KFENCE is not set
# end of Memory Debugging
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=60
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_WQ_WATCHDOG=y
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHED_INFO=y
# CONFIG_SCHEDSTATS is not set
# end of Scheduler Debugging
# CONFIG_DEBUG_TIMEKEEPING is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
CONFIG_DEBUG_RWSEMS=y
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)
# CONFIG_DEBUG_IRQFLAGS is not set
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PLIST is not set
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_BUG_ON_DATA_CORRUPTION=y
CONFIG_DEBUG_MAPLE_TREE=y
# end of Debug kernel data structures
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
# CONFIG_RCU_SCALE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_REF_SCALE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
CONFIG_IO_STRICT_DEVMEM=y
#
# powerpc Debugging
#
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_JUMP_LABEL_FEATURE_CHECKS is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
# CONFIG_BDI_SWITCH is not set
CONFIG_BOOTX_TEXT=y
# CONFIG_PPC_EARLY_DEBUG is not set
# end of powerpc Debugging
#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
# CONFIG_RUNTIME_TESTING_MENU is not set
CONFIG_ARCH_USE_MEMTEST=y
# CONFIG_MEMTEST is not set
# end of Kernel Testing and Coverage
#
# Rust hacking
#
# end of Rust hacking
# end of Kernel hacking
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-02 18:03 ` Erhard Furtner
@ 2024-06-02 20:38 ` Yu Zhao
2024-06-02 21:36 ` Erhard Furtner
2024-06-03 22:13 ` Erhard Furtner
1 sibling, 1 reply; 45+ messages in thread
From: Yu Zhao @ 2024-06-02 20:38 UTC (permalink / raw)
To: Erhard Furtner; +Cc: linux-mm, linux-kernel, linuxppc-dev
On Sun, Jun 2, 2024 at 12:03 PM Erhard Furtner <erhard_f@mailbox.org> wrote:
>
> On Sat, 1 Jun 2024 00:01:48 -0600
> Yu Zhao <yuzhao@google.com> wrote:
>
> > Hi Erhard,
> >
> > The OOM kills on both kernel versions seem to be reasonable to me.
> >
> > Your system has 2GB memory and it uses zswap with zsmalloc (which is
> > good since it can allocate from the highmem zone) and zstd/lzo (which
> > doesn't matter much). Somehow -- I couldn't figure out why -- it
> > splits the 2GB into a 0.25GB DMA zone and a 1.75GB highmem zone:
> >
> > [ 0.000000] Zone ranges:
> > [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
> > [ 0.000000] Normal empty
> > [ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff]
> >
> > The kernel can't allocate from the highmem zone -- only userspace and
> > zsmalloc can. OOM kills were due to the low memory conditions in the
> > DMA zone where the kernel itself failed to allocate from.
> >
> > Do you know a kernel version that doesn't have OOM kills while running
> > the same workload? If so, could you send that .config to me? If not,
> > could you try disabling CONFIG_HIGHMEM? (It might not help but I'm out
> > of ideas at the moment.)
> >
> > Thanks!
>
> Hi Yu!
>
> Thanks for looking into this.
>
> The reason for this 0.25GB DMA / 1.75GB highmem split is beyond my knowledge. I can only tell this much that it's like this at least since kernel v4.14.x (dmesg of an old bugreport of mine at https://bugzilla.kernel.org/show_bug.cgi?id=201723), I guess earlier kernel versions too.
>
> Without CONFIG_HIGHMEM the memory layout looks like this:
>
> Total memory = 768MB; using 2048kB for hash table
> [...]
> Top of RAM: 0x30000000, Total RAM: 0x30000000
> Memory hole size: 0MB
> Zone ranges:
> DMA [mem 0x0000000000000000-0x000000002fffffff]
> Normal empty
> Movable zone start for each node
> Early memory node ranges
> node 0: [mem 0x0000000000000000-0x000000002fffffff]
> Initmem setup node 0 [mem 0x0000000000000000-0x000000002fffffff]
> percpu: Embedded 29 pages/cpu s28448 r8192 d82144 u118784
> pcpu-alloc: s28448 r8192 d82144 u118784 alloc=29*4096
> pcpu-alloc: [0] 0 [0] 1
> Kernel command line: ro root=/dev/sda5 slub_debug=FZP page_poison=1 netconsole=6666@192.168.2.8/eth0,6666@192.168.2.3/A8:A1:59:16:4F:EA debug
> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
> Built 1 zonelists, mobility grouping on. Total pages: 194880
> mem auto-init: stack:all(pattern), heap alloc:off, heap free:off
> Kernel virtual memory layout:
> * 0xffbdf000..0xfffff000 : fixmap
> * 0xff8f4000..0xffbdf000 : early ioremap
> * 0xf1000000..0xff8f4000 : vmalloc & ioremap
> * 0xb0000000..0xc0000000 : modules
> Memory: 761868K/786432K available (7760K kernel code, 524K rwdata, 4528K rodata, 1100K init, 253K bss, 24564K reserved, 0K cma-reserved)
> [...]
>
> With only 768 MB RAM and 2048K hashtable I get pretty much the same "kswapd0: page allocation failure: order:0, mode:0xcc0(GFP_KERNEL),nodemask=(null),cpuset=/,mems_allowed=0" as with the HIGHMEM enabled kernel at
> running "stress-ng --vm 2 --vm-bytes 1930M --verify -v".
>
> I tried the workload on v6.6.32 LTS where the issue shows up too. But v6.1.92 LTS seems ok! Triple checked v6.1.92 to be sure.
>
> Attached please find kernel v6.9.3 dmesg (without HIGHMEM) and kernel v6.1.92 .config.
Thanks.
I compared the .config between v6.8.9 (you attached previously) and
v6.1.92 -- I didn't see any major differences (both have ZONE_DMA,
HIGHMEM, MGLRU and zswap/zsmalloc). Either there is something broken
between v6.1.92 and v6.6.32 (as you mentioned above), or it's just a
kernel allocation bloat which puts the DMA zone (0.25GB) under too
heavy pressure. The latter isn't uncommon when upgrading to a newer
version of the kernel.
Could you please attach the dmesg from v6.1.92? I want to compare the
dmegs between the two kernel versions as well -- that might provide
some hints.
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-02 20:38 ` Yu Zhao
@ 2024-06-02 21:36 ` Erhard Furtner
0 siblings, 0 replies; 45+ messages in thread
From: Erhard Furtner @ 2024-06-02 21:36 UTC (permalink / raw)
To: Yu Zhao; +Cc: linux-mm, linux-kernel, linuxppc-dev
[-- Attachment #1: Type: text/plain, Size: 1054 bytes --]
On Sun, 2 Jun 2024 14:38:18 -0600
Yu Zhao <yuzhao@google.com> wrote:
> I compared the .config between v6.8.9 (you attached previously) and
> v6.1.92 -- I didn't see any major differences (both have ZONE_DMA,
> HIGHMEM, MGLRU and zswap/zsmalloc). Either there is something broken
> between v6.1.92 and v6.6.32 (as you mentioned above), or it's just a
> kernel allocation bloat which puts the DMA zone (0.25GB) under too
> heavy pressure. The latter isn't uncommon when upgrading to a newer
> version of the kernel.
>
> Could you please attach the dmesg from v6.1.92? I want to compare the
> dmegs between the two kernel versions as well -- that might provide
> some hints.
No problem, attached please find the v6.1.92 dmesg and also the v6.9.3 .config and dmesg.
I stripped down the v6.9.3 .config a bit (to ease 'make oldconfig' for older kernels) from my originally posted v6.8.9 .config and used that as a starting point for v6.6.32 and v6.1.92.
Also I started a git bisect. Let's see if I get something meaningful out of this...
Regards,
Erhard
[-- Attachment #2: config_693_g4- --]
[-- Type: application/octet-stream, Size: 104402 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/powerpc 6.9.3-gentoo Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="gcc (Gentoo 13.2.1_p20240210 p14) 13.2.1 20240210"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=130201
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=24200
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=24200
CONFIG_LLD_VERSION=0
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_GOTO_TIED_OUTPUT=y
CONFIG_GCC_ASM_GOTO_OUTPUT_WORKAROUND=y
CONFIG_TOOLS_SUPPORT_RELR=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=0
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION="-PMacG4"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_XZ is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_WATCH_QUEUE=y
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_DOMAIN_NOMAP=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem
CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y
#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
# CONFIG_BPF_JIT is not set
# CONFIG_BPF_UNPRIV_DEFAULT_OFF is not set
# CONFIG_BPF_PRELOAD is not set
# end of BPF subsystem
CONFIG_PREEMPT_VOLUNTARY_BUILD=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting
CONFIG_CPU_ISOLATION=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_TREE_SRCU=y
CONFIG_NEED_SRCU_NMI_SAFE=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem
# CONFIG_IKCONFIG is not set
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=16
CONFIG_LOG_CPU_MAX_BUF_SHIFT=13
# CONFIG_PRINTK_INDEX is not set
#
# Scheduler features
#
# end of Scheduler features
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC10_NO_ARRAY_BOUNDS=y
CONFIG_CC_NO_ARRAY_BOUNDS=y
CONFIG_GCC_NO_STRINGOP_OVERFLOW=y
CONFIG_CC_NO_STRINGOP_OVERFLOW=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
# CONFIG_CGROUP_FAVOR_DYNMODS is not set
CONFIG_MEMCG=y
CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_SCHED_MM_CID=y
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
CONFIG_CGROUP_MISC=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_TIME_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
# CONFIG_RD_ZSTD is not set
# CONFIG_BOOT_CONFIG is not set
# CONFIG_INITRAMFS_PRESERVE_MTIME is not set
# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
# CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_LD_ORPHAN_WARN_LEVEL="warn"
CONFIG_SYSCTL=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_EXPERT=y
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
# CONFIG_SYSFS_SYSCALL is not set
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KCMP=y
CONFIG_RSEQ=y
# CONFIG_DEBUG_RSEQ is not set
CONFIG_CACHESTAT_SYSCALL=y
# CONFIG_PC104 is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_SELFTEST is not set
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_ARCH_HAS_MEMBARRIER_CALLBACKS=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# end of Kernel Performance Events And Counters
# CONFIG_PROFILING is not set
#
# Kexec and crash features
#
# CONFIG_KEXEC is not set
# end of Kexec and crash features
# end of General setup
CONFIG_PPC32=y
# CONFIG_PPC64 is not set
#
# Processor support
#
CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_PPC_BOOK3S_603 is not set
CONFIG_PPC_BOOK3S_604=y
# CONFIG_POWERPC_CPU is not set
# CONFIG_E300C2_CPU is not set
# CONFIG_E300C3_CPU is not set
CONFIG_G4_CPU=y
# CONFIG_TOOLCHAIN_DEFAULT_CPU is not set
CONFIG_TARGET_CPU_BOOL=y
CONFIG_TARGET_CPU="G4"
CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU_REGS=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_KUEP=y
CONFIG_PPC_KUAP=y
# CONFIG_PPC_KUAP_DEBUG is not set
CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_PMU_SYSFS is not set
CONFIG_PPC_PERF_CTRS=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
# end of Processor support
CONFIG_VDSO32=y
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_32BIT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MAX=17
CONFIG_ARCH_MMAP_RND_BITS_MIN=11
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
CONFIG_NR_IRQS=512
CONFIG_NMI_IPI=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_PANIC_TIMEOUT=40
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_TBSYNC=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_HAS_ADD_PAGES=y
# CONFIG_PPC_PCI_OF_BUS_MAP is not set
CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PPC_MSI_BITMAP=y
#
# Platform support
#
# CONFIG_SCOM_DEBUGFS is not set
# CONFIG_PPC_CHRP is not set
# CONFIG_PPC_MPC512x is not set
# CONFIG_PPC_MPC52xx is not set
CONFIG_PPC_PMAC=y
CONFIG_PPC_PMAC32_PSURGE=y
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
CONFIG_KVM_GUEST=y
CONFIG_EPAPR_PARAVIRT=y
CONFIG_PPC_HASH_MMU_NATIVE=y
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_PPC_SMP_MUXED_IPI=y
CONFIG_MPIC=y
CONFIG_MPIC_MSGR=y
CONFIG_PPC_MPC106=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set
#
# CPU frequency scaling drivers
#
# CONFIG_CPUFREQ_DT_PLATDEV is not set
CONFIG_CPU_FREQ_PMAC=y
# end of CPU Frequency scaling
#
# CPUIdle driver
#
#
# CPU Idle
#
# CONFIG_CPU_IDLE is not set
# end of CPU Idle
# end of CPUIdle driver
CONFIG_TAU=y
# CONFIG_TAU_INT is not set
# CONFIG_TAU_AVERAGE is not set
# CONFIG_GEN_RTC is not set
# end of Platform support
#
# Kernel options
#
CONFIG_HIGHMEM=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
CONFIG_HOTPLUG_CPU=y
# CONFIG_PPC_QUEUED_SPINLOCKS is not set
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_ARCH_SUPPORTS_KEXEC=y
CONFIG_ARCH_SUPPORTS_KEXEC_PURGATORY=y
CONFIG_ARCH_SUPPORTS_CRASH_DUMP=y
CONFIG_IRQ_ALL_CPUS=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_PPC_4K_PAGES=y
CONFIG_THREAD_SHIFT=13
CONFIG_DATA_SHIFT=22
CONFIG_ARCH_FORCE_MAX_ORDER=10
CONFIG_CMDLINE=""
CONFIG_EXTRA_TARGETS=""
CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_APM_EMULATION=m
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
# CONFIG_ENERGY_MODEL is not set
# end of Kernel options
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
# CONFIG_FSL_LBC is not set
# end of Bus options
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xb0000000
# end of Advanced setup
# CONFIG_VIRTUALIZATION is not set
CONFIG_HAVE_LIVEPATCH=y
CONFIG_CPU_MITIGATIONS=y
#
# General architecture-dependent options
#
CONFIG_HOTPLUG_SMT=y
CONFIG_SMT_NUM_THREADS_DYNAMIC=y
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_STATIC_CALL_SELFTEST is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_MMU_GATHER_PAGE_SIZE=y
CONFIG_MMU_GATHER_MERGE_VMAS=y
CONFIG_ARCH_WANT_IRQS_OFF_ACTIVATE_MM=y
CONFIG_MMU_LAZY_TLB_REFCOUNT=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
# CONFIG_SECCOMP_CACHE_DEBUG is not set
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
# CONFIG_STACKPROTECTOR_STRONG is not set
CONFIG_LTO_NONE=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING_USER=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOC=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_ARCH_MMAP_RND_BITS=11
CONFIG_HAVE_PAGE_SIZE_4KB=y
CONFIG_PAGE_SIZE_4KB=y
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_PAGE_SHIFT=12
CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y
CONFIG_HAVE_OBJTOOL=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_HAVE_ARCH_NVRAM_OPS=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND=y
CONFIG_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
# CONFIG_VMAP_STACK is not set
CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT=y
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
# CONFIG_STRICT_MODULE_RWX is not set
CONFIG_ARCH_HAS_PHYS_TO_DMA=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_HAVE_STATIC_CALL=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SPLIT_ARG64=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling
CONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not set
CONFIG_FUNCTION_ALIGNMENT_4B=y
CONFIG_FUNCTION_ALIGNMENT=4
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_DEBUG is not set
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODULE_UNLOAD_TAINT_TRACKING is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
CONFIG_MODPROBE_PATH="/sbin/modprobe"
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
CONFIG_BLK_CGROUP_RWSTAT=y
CONFIG_BLK_CGROUP_PUNT_BIO=y
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_ICQ=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_WRITE_MOUNTED is not set
# CONFIG_BLK_DEV_ZONED is not set
# CONFIG_BLK_DEV_THROTTLING is not set
CONFIG_BLK_WBT=y
CONFIG_BLK_WBT_MQ=y
# CONFIG_BLK_CGROUP_IOLATENCY is not set
# CONFIG_BLK_CGROUP_IOCOST is not set
# CONFIG_BLK_CGROUP_IOPRIO is not set
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set
# CONFIG_BLK_INLINE_ENCRYPTION is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
CONFIG_BLK_MQ_STACKING=y
#
# IO Schedulers
#
# CONFIG_MQ_IOSCHED_DEADLINE is not set
# CONFIG_MQ_IOSCHED_KYBER is not set
CONFIG_IOSCHED_BFQ=y
CONFIG_BFQ_GROUP_IOSCHED=y
# CONFIG_BFQ_CGROUP_DEBUG is not set
# end of IO Schedulers
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#
CONFIG_ZPOOL=y
CONFIG_SWAP=y
CONFIG_ZSWAP=y
CONFIG_ZSWAP_DEFAULT_ON=y
CONFIG_ZSWAP_SHRINKER_DEFAULT_ON=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo"
# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD is not set
# CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set
CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC=y
CONFIG_ZSWAP_ZPOOL_DEFAULT="zsmalloc"
# CONFIG_ZBUD is not set
# CONFIG_Z3FOLD is not set
CONFIG_ZSMALLOC=y
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_ZSMALLOC_CHAIN_SIZE=8
#
# Slab allocator options
#
CONFIG_SLUB=y
# CONFIG_SLUB_TINY is not set
# CONFIG_SLAB_MERGE_DEFAULT is not set
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLAB_FREELIST_HARDENED=y
# CONFIG_SLUB_STATS is not set
# CONFIG_SLUB_CPU_PARTIAL is not set
CONFIG_RANDOM_KMALLOC_CACHES=y
# end of Slab allocator options
CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
# CONFIG_COMPAT_BRK is not set
CONFIG_FLATMEM=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_ARCH_KEEP_MEMBLOCK=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_PCP_BATCH_SCALE_MAX=5
CONFIG_BOUNCE=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=16384
# CONFIG_CMA is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ZONE_DMA=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not set
# CONFIG_DMAPOOL_TEST is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_KMAP_LOCAL=y
CONFIG_MEMFD_CREATE=y
# CONFIG_ANON_VMA_NAME is not set
CONFIG_USERFAULTFD=y
CONFIG_LRU_GEN=y
CONFIG_LRU_GEN_ENABLED=y
# CONFIG_LRU_GEN_STATS is not set
CONFIG_LOCK_MM_AND_FIND_VMA=y
#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options
CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_NET_XGRESS=y
CONFIG_SKB_EXTENSIONS=y
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_AF_UNIX_OOB=y
CONFIG_UNIX_DIAG=m
CONFIG_TLS=m
CONFIG_TLS_DEVICE=y
# CONFIG_TLS_TOE is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=m
CONFIG_XFRM_USER=m
# CONFIG_XFRM_INTERFACE is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_AH=m
CONFIG_XFRM_ESP=m
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
# CONFIG_XDP_SOCKETS is not set
CONFIG_NET_HANDSHAKE=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=m
CONFIG_SYN_COOKIES=y
# CONFIG_NET_IPVTI is not set
CONFIG_NET_UDP_TUNNEL=m
# CONFIG_NET_FOU is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
# CONFIG_INET_ESP_OFFLOAD is not set
# CONFIG_INET_ESPINTCP is not set
CONFIG_INET_IPCOMP=m
CONFIG_INET_TABLE_PERTURB_ORDER=16
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
# CONFIG_TCP_CONG_CUBIC is not set
CONFIG_TCP_CONG_WESTWOOD=y
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_NV is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_TCP_CONG_DCTCP is not set
# CONFIG_TCP_CONG_CDG is not set
# CONFIG_TCP_CONG_BBR is not set
CONFIG_DEFAULT_WESTWOOD=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="westwood"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
# CONFIG_INET6_ESP_OFFLOAD is not set
# CONFIG_INET6_ESPINTCP is not set
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
# CONFIG_IPV6_VTI is not set
# CONFIG_IPV6_SIT is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_IPV6_RPL_LWTUNNEL is not set
# CONFIG_IPV6_IOAM6_LWTUNNEL is not set
# CONFIG_NETLABEL is not set
# CONFIG_MPTCP is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_COOKIE_HMAC_SHA1 is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_BRIDGE_MRP is not set
# CONFIG_BRIDGE_CFM is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_CBS is not set
# CONFIG_NET_SCH_ETF is not set
# CONFIG_NET_SCH_TAPRIO is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_SKBPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
# CONFIG_NET_SCH_CODEL is not set
CONFIG_NET_SCH_FQ_CODEL=y
# CONFIG_NET_SCH_CAKE is not set
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
# CONFIG_NET_SCH_PLUG is not set
# CONFIG_NET_SCH_ETS is not set
CONFIG_NET_SCH_DEFAULT=y
CONFIG_DEFAULT_FQ_CODEL=y
# CONFIG_DEFAULT_PFIFO_FAST is not set
CONFIG_DEFAULT_NET_SCH="fq_codel"
#
# Classification
#
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_CLS_CGROUP is not set
# CONFIG_NET_CLS_BPF is not set
# CONFIG_NET_CLS_FLOWER is not set
# CONFIG_NET_CLS_MATCHALL is not set
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
CONFIG_VSOCKETS=m
CONFIG_VSOCKETS_DIAG=m
# CONFIG_VSOCKETS_LOOPBACK is not set
# CONFIG_VIRTIO_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_NET_NSH is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_QRTR is not set
# CONFIG_NET_NCSI is not set
CONFIG_PCPU_DEV_REFCNT=y
CONFIG_MAX_SKB_FRAGS=17
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_STREAM_PARSER=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# end of Network testing
# end of Networking options
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_STREAM_PARSER=y
# CONFIG_MCTP is not set
# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_FD=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_SOCK_VALIDATE_XMIT=y
CONFIG_NET_SOCK_MSG=y
CONFIG_PAGE_POOL=y
# CONFIG_PAGE_POOL_STATS is not set
CONFIG_FAILOVER=y
CONFIG_ETHTOOL_NETLINK=y
#
# Device Drivers
#
CONFIG_HAVE_PCI=y
CONFIG_FORCE_PCI=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCIEASPM is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_ARCH_FALLBACKS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_PCI_DYNAMIC_OF_NODES=y
# CONFIG_PCIE_BUS_TUNE_OFF is not set
CONFIG_PCIE_BUS_DEFAULT=y
# CONFIG_PCIE_BUS_SAFE is not set
# CONFIG_PCIE_BUS_PERFORMANCE is not set
# CONFIG_PCIE_BUS_PEER2PEER is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=4
# CONFIG_HOTPLUG_PCI is not set
#
# PCI controller drivers
#
# CONFIG_PCI_FTPCI100 is not set
# CONFIG_PCI_HOST_GENERIC is not set
# CONFIG_PCIE_MICROCHIP_HOST is not set
# CONFIG_PCIE_XILINX is not set
#
# Cadence-based PCIe controllers
#
# CONFIG_PCIE_CADENCE_PLAT_HOST is not set
# end of Cadence-based PCIe controllers
#
# DesignWare-based PCIe controllers
#
# CONFIG_PCI_MESON is not set
# CONFIG_PCIE_DW_PLAT_HOST is not set
# end of DesignWare-based PCIe controllers
#
# Mobiveil-based PCIe controllers
#
# end of Mobiveil-based PCIe controllers
# end of PCI controller drivers
#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint
#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers
# CONFIG_CXL_BUS is not set
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set
#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_DEVTMPFS_SAFE=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
CONFIG_FW_LOADER_COMPRESS=y
# CONFIG_FW_LOADER_COMPRESS_XZ is not set
CONFIG_FW_LOADER_COMPRESS_ZSTD=y
# CONFIG_FW_UPLOAD is not set
# end of Firmware loader
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_DMA_FENCE_TRACE=y
# CONFIG_FW_DEVLINK_SYNC_STATE_TIMEOUT is not set
# end of Generic Driver Options
#
# Bus devices
#
# CONFIG_MHI_BUS is not set
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices
#
# Cache Drivers
#
# end of Cache Drivers
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
#
# Firmware Drivers
#
#
# ARM System Control and Management Interface Protocol
#
# end of ARM System Control and Management Interface Protocol
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_FW_CFG_SYSFS=m
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# Qualcomm firmware drivers
#
# end of Qualcomm firmware drivers
#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers
# CONFIG_GNSS is not set
# CONFIG_MTD is not set
CONFIG_DTC=y
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
# CONFIG_OF_OVERLAY is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_FD is not set
# CONFIG_MAC_FLOPPY is not set
CONFIG_CDROM=y
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_ZRAM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_UBLK is not set
#
# NVME Support
#
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_NVME_FC is not set
# CONFIG_NVME_TCP is not set
# CONFIG_NVME_TARGET is not set
# end of NVME Support
#
# Misc devices
#
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_PHANTOM is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_SRAM is not set
# CONFIG_DW_XDATA_PCIE is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
# CONFIG_OPEN_DICE is not set
# CONFIG_VCPU_STALL_DETECTOR is not set
# CONFIG_NSM is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support
# CONFIG_CB710_CORE is not set
#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline
# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_ALTERA_STAPL is not set
# CONFIG_ECHO is not set
# CONFIG_BCM_VK is not set
# CONFIG_MISC_ALCOR_PCI is not set
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_MISC_RTSX_USB is not set
CONFIG_PVPANIC=y
CONFIG_PVPANIC_MMIO=m
CONFIG_PVPANIC_PCI=m
# end of Misc devices
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=m
CONFIG_BLK_DEV_BSG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# end of SCSI Transports
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_MPI3MR is not set
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FDOMAIN_PCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_WD719X is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_MESH is not set
# CONFIG_SCSI_MAC53C94 is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
CONFIG_SCSI_VIRTIO=y
# CONFIG_SCSI_DH is not set
# end of SCSI device support
CONFIG_ATA=y
CONFIG_SATA_HOST=y
CONFIG_ATA_VERBOSE_ERROR=y
# CONFIG_ATA_FORCE is not set
# CONFIG_SATA_PMP is not set
#
# Controllers with non-SFF native interface
#
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_AHCI_DWC is not set
# CONFIG_AHCI_CEVA is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
CONFIG_SATA_SIL=y
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
CONFIG_PATA_MACIO=y
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OF_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_BITMAP_FILE is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=m
CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING=y
# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_UNSTRIPED is not set
CONFIG_DM_CRYPT=m
# CONFIG_DM_SNAPSHOT is not set
CONFIG_DM_THIN_PROVISIONING=m
# CONFIG_DM_CACHE is not set
# CONFIG_DM_WRITECACHE is not set
# CONFIG_DM_ERA is not set
# CONFIG_DM_CLONE is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_RAID is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_DUST is not set
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_DM_LOG_WRITES is not set
# CONFIG_DM_INTEGRITY is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_ADB=y
# CONFIG_ADB_CUDA is not set
CONFIG_ADB_PMU=y
CONFIG_ADB_PMU_EVENT=y
CONFIG_ADB_PMU_LED=y
# CONFIG_ADB_PMU_LED_DISK is not set
CONFIG_PMAC_APM_EMU=m
CONFIG_PMAC_MEDIABAY=y
# CONFIG_PMAC_BACKLIGHT is not set
CONFIG_INPUT_ADBHID=y
CONFIG_MAC_EMUMOUSEBTN=m
CONFIG_THERM_WINDTUNNEL=m
CONFIG_THERM_ADT746X=m
CONFIG_WINDFARM=m
# CONFIG_PMAC_RACKMETER is not set
CONFIG_SENSORS_AMS=m
CONFIG_SENSORS_AMS_PMU=y
CONFIG_SENSORS_AMS_I2C=y
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_WIREGUARD is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_GENEVE is not set
# CONFIG_BAREUDP is not set
# CONFIG_GTP is not set
# CONFIG_MACSEC is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_EXTENDED_LOG is not set
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
CONFIG_VIRTIO_NET=y
# CONFIG_NLMON is not set
# CONFIG_NETKIT is not set
CONFIG_SUNGEM_PHY=y
# CONFIG_ARCNET is not set
CONFIG_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_AGERE is not set
# CONFIG_NET_VENDOR_ALACRITECH is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
# CONFIG_NET_VENDOR_AMAZON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_APPLE is not set
# CONFIG_NET_VENDOR_AQUANTIA is not set
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_ASIX is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CADENCE is not set
# CONFIG_NET_VENDOR_CAVIUM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_NET_VENDOR_CORTINA is not set
# CONFIG_NET_VENDOR_DAVICOM is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_ENGLEDER is not set
# CONFIG_NET_VENDOR_EZCHIP is not set
# CONFIG_NET_VENDOR_FUNGIBLE is not set
# CONFIG_NET_VENDOR_GOOGLE is not set
# CONFIG_NET_VENDOR_HUAWEI is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_JME is not set
# CONFIG_NET_VENDOR_LITEX is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_MICROSEMI is not set
# CONFIG_NET_VENDOR_MICROSOFT is not set
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NI is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NETERION is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_VENDOR_PACKET_ENGINES is not set
# CONFIG_NET_VENDOR_PENSANDO is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
# CONFIG_NET_VENDOR_BROCADE is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_RDC is not set
# CONFIG_NET_VENDOR_REALTEK is not set
# CONFIG_NET_VENDOR_RENESAS is not set
# CONFIG_NET_VENDOR_ROCKER is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_NET_VENDOR_SOLARFLARE is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_SOCIONEXT is not set
# CONFIG_NET_VENDOR_STMICRO is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
CONFIG_SUNGEM=y
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VERTEXCOM is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WANGXUN is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_NET_VENDOR_XILINX is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PHYLIB is not set
# CONFIG_PSE_CONTROLLER is not set
# CONFIG_MDIO_DEVICE is not set
#
# PCS device drivers
#
# end of PCS device drivers
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_USB_NET_DRIVERS is not set
# CONFIG_WLAN is not set
# CONFIG_WAN is not set
#
# Wireless WAN
#
# CONFIG_WWAN is not set
# end of Wireless WAN
# CONFIG_VMXNET3 is not set
# CONFIG_NETDEVSIM is not set
CONFIG_NET_FAILOVER=y
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
# CONFIG_INPUT_APMPOWER is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_APPLETOUCH=m
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_AS5011 is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
CONFIG_JOYSTICK_XPAD=m
# CONFIG_JOYSTICK_XPAD_FF is not set
CONFIG_JOYSTICK_XPAD_LEDS=y
# CONFIG_JOYSTICK_PXRC is not set
# CONFIG_JOYSTICK_QWIIC is not set
# CONFIG_JOYSTICK_FSIA6B is not set
# CONFIG_JOYSTICK_SENSEHAT is not set
# CONFIG_JOYSTICK_SEESAW is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_ATMEL_CAPTOUCH is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_DA7280_HAPTICS is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_IQS269A is not set
# CONFIG_INPUT_IQS626A is not set
# CONFIG_INPUT_IQS7222 is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_RMI4_CORE is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_LEGACY_TIOCSTI is not set
CONFIG_LDISC_AUTOLOAD=y
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
# CONFIG_SERIAL_8250_16550A_VARIANTS is not set
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCILIB=y
CONFIG_SERIAL_8250_PCI=y
# CONFIG_SERIAL_8250_EXAR is not set
CONFIG_SERIAL_8250_NR_UARTS=8
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_PCI1XXXX is not set
CONFIG_SERIAL_8250_FSL=y
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
# CONFIG_SERIAL_8250_PERICOM is not set
CONFIG_SERIAL_OF_PLATFORM=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_PMACZILOG is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SIFIVE is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
# end of Serial drivers
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_PPC_EPAPR_HV_BYTECHAN is not set
# CONFIG_N_GSM is not set
# CONFIG_NOZOMI is not set
# CONFIG_NULL_TTY is not set
CONFIG_HVC_DRIVER=y
# CONFIG_HVC_UDBG is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_BA431 is not set
CONFIG_HW_RANDOM_VIRTIO=m
# CONFIG_HW_RANDOM_CCTRNG is not set
# CONFIG_HW_RANDOM_XIPHERA is not set
# CONFIG_APPLICOM is not set
CONFIG_DEVMEM=y
CONFIG_NVRAM=m
CONFIG_DEVPORT=y
# CONFIG_TCG_TPM is not set
# CONFIG_XILLYBUS is not set
# CONFIG_XILLYUSB is not set
# end of Character devices
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=m
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_NVIDIA_GPU is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# Mac SMBus host controller drivers
#
CONFIG_I2C_POWERMAC=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_MPC is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_CP2615 is not set
# CONFIG_I2C_PCI1XXXX is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_VIRTIO is not set
# end of I2C Hardware Bus support
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support
# CONFIG_I3C is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
# CONFIG_PPS is not set
#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support
# CONFIG_PINCTRL is not set
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_APM_POWER=m
# CONFIG_IP5XXX_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_CW2015 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
CONFIG_BATTERY_PMU=m
# CONFIG_BATTERY_SAMSUNG_SDI is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_LTC4162L is not set
# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
# CONFIG_CHARGER_MAX77976 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_BATTERY_GOLDFISH is not set
# CONFIG_BATTERY_RT5033 is not set
# CONFIG_CHARGER_BD99954 is not set
# CONFIG_BATTERY_UG3105 is not set
# CONFIG_FUEL_GAUGE_MM8013 is not set
CONFIG_HWMON=m
CONFIG_HWMON_DEBUG_CHIP=y
#
# Native drivers
#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM1177 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_AHT10 is not set
# CONFIG_SENSORS_AQUACOMPUTER_D5NEXT is not set
# CONFIG_SENSORS_AS370 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ASUS_ROG_RYUJIN is not set
# CONFIG_SENSORS_AXI_FAN_CONTROL is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_CHIPCAP2 is not set
# CONFIG_SENSORS_CORSAIR_CPRO is not set
# CONFIG_SENSORS_CORSAIR_PSU is not set
CONFIG_SENSORS_DRIVETEMP=m
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GIGABYTE_WATERFORCE is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_HS3001 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWERZ is not set
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2947_I2C is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC2991 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_LTC4282 is not set
# CONFIG_SENSORS_MAX127 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX31730 is not set
# CONFIG_SENSORS_MAX31760 is not set
# CONFIG_MAX31827 is not set
# CONFIG_SENSORS_MAX6620 is not set
# CONFIG_SENSORS_MAX6621 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MC34VR500 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_TPS23861 is not set
# CONFIG_SENSORS_MR75203 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_NCT6775_I2C is not set
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NPCM7XX is not set
# CONFIG_SENSORS_NZXT_KRAKEN2 is not set
# CONFIG_SENSORS_NZXT_KRAKEN3 is not set
# CONFIG_SENSORS_NZXT_SMART2 is not set
# CONFIG_SENSORS_OCC_P8_I2C is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_PT5161L is not set
# CONFIG_SENSORS_SBTSI is not set
# CONFIG_SENSORS_SBRMI is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHT4x is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC2305 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA238 is not set
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_TMP464 is not set
# CONFIG_SENSORS_TMP513 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83773G is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_ACT8945A is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_SMPRO is not set
# CONFIG_MFD_AS3722 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_CS42L43_I2C is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_MFD_MAX5970 is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_GATEWORKS_GSC is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_MP2629 is not set
# CONFIG_MFD_HI6421_PMIC is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_IQS62X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77541 is not set
# CONFIG_MFD_MAX77620 is not set
# CONFIG_MFD_MAX77650 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77714 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6370 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_NTXEC is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_SY7636A is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT4831 is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RT5120 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_RK8XX_I2C is not set
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TI_LP87565 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS65219 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS6594_I2C is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_LOCHNAGAR is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_ROHM_BD718XX is not set
# CONFIG_MFD_ROHM_BD71828 is not set
# CONFIG_MFD_ROHM_BD957XMUF is not set
# CONFIG_MFD_STPMIC1 is not set
# CONFIG_MFD_STMFX is not set
# CONFIG_MFD_ATC260X_I2C is not set
# CONFIG_MFD_QCOM_PM8008 is not set
# CONFIG_MFD_RSMU_I2C is not set
# end of Multifunction device drivers
# CONFIG_REGULATOR is not set
# CONFIG_RC_CORE is not set
#
# CEC support
#
# CONFIG_MEDIA_CEC_SUPPORT is not set
# end of CEC support
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_APERTURE_HELPERS=y
CONFIG_VIDEO=y
# CONFIG_AUXDISPLAY is not set
# CONFIG_AGP is not set
CONFIG_DRM=y
# CONFIG_DRM_DEBUG_MM is not set
CONFIG_DRM_KMS_HELPER=y
# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set
CONFIG_DRM_DEBUG_MODESET_LOCK=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_DISPLAY_HELPER=m
CONFIG_DRM_DISPLAY_DP_HELPER=y
# CONFIG_DRM_DP_AUX_CHARDEV is not set
# CONFIG_DRM_DP_CEC is not set
CONFIG_DRM_TTM=m
CONFIG_DRM_VRAM_HELPER=m
CONFIG_DRM_TTM_HELPER=m
CONFIG_DRM_GEM_SHMEM_HELPER=m
CONFIG_DRM_SUBALLOC_HELPER=m
#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# end of I2C encoder or helper chips
#
# ARM devices
#
# end of ARM devices
CONFIG_DRM_RADEON=m
CONFIG_DRM_RADEON_USERPTR=y
# CONFIG_DRM_AMDGPU is not set
# CONFIG_DRM_NOUVEAU is not set
# CONFIG_DRM_XE is not set
CONFIG_DRM_VGEM=m
# CONFIG_DRM_VKMS is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_QXL is not set
CONFIG_DRM_VIRTIO_GPU=m
CONFIG_DRM_VIRTIO_GPU_KMS=y
CONFIG_DRM_PANEL=y
#
# Display Panels
#
# CONFIG_DRM_PANEL_LVDS is not set
# CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 is not set
# CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6D7AA0 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E63M0 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set
# CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set
# CONFIG_DRM_PANEL_EDP is not set
# CONFIG_DRM_PANEL_SIMPLE is not set
# end of Display Panels
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y
#
# Display Interface Bridges
#
# CONFIG_DRM_CHIPONE_ICN6211 is not set
# CONFIG_DRM_CHRONTEL_CH7033 is not set
# CONFIG_DRM_DISPLAY_CONNECTOR is not set
# CONFIG_DRM_ITE_IT6505 is not set
# CONFIG_DRM_LONTIUM_LT8912B is not set
# CONFIG_DRM_LONTIUM_LT9211 is not set
# CONFIG_DRM_LONTIUM_LT9611 is not set
# CONFIG_DRM_LONTIUM_LT9611UXC is not set
# CONFIG_DRM_ITE_IT66121 is not set
# CONFIG_DRM_LVDS_CODEC is not set
# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set
# CONFIG_DRM_NXP_PTN3460 is not set
# CONFIG_DRM_PARADE_PS8622 is not set
# CONFIG_DRM_PARADE_PS8640 is not set
# CONFIG_DRM_SIL_SII8620 is not set
# CONFIG_DRM_SII902X is not set
# CONFIG_DRM_SII9234 is not set
# CONFIG_DRM_SIMPLE_BRIDGE is not set
# CONFIG_DRM_THINE_THC63LVD1024 is not set
# CONFIG_DRM_TOSHIBA_TC358762 is not set
# CONFIG_DRM_TOSHIBA_TC358764 is not set
# CONFIG_DRM_TOSHIBA_TC358767 is not set
# CONFIG_DRM_TOSHIBA_TC358768 is not set
# CONFIG_DRM_TOSHIBA_TC358775 is not set
# CONFIG_DRM_TI_DLPC3433 is not set
# CONFIG_DRM_TI_TFP410 is not set
# CONFIG_DRM_TI_SN65DSI83 is not set
# CONFIG_DRM_TI_SN65DSI86 is not set
# CONFIG_DRM_TI_TPD12S015 is not set
# CONFIG_DRM_ANALOGIX_ANX6345 is not set
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_ANALOGIX_ANX7625 is not set
# CONFIG_DRM_I2C_ADV7511 is not set
# CONFIG_DRM_CDNS_DSI is not set
# CONFIG_DRM_CDNS_MHDP8546 is not set
# end of Display Interface Bridges
# CONFIG_DRM_ETNAVIV is not set
# CONFIG_DRM_LOGICVC is not set
# CONFIG_DRM_ARCPGU is not set
CONFIG_DRM_BOCHS=m
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_GM12U320 is not set
# CONFIG_DRM_OFDRM is not set
# CONFIG_DRM_SIMPLEDRM is not set
# CONFIG_DRM_GUD is not set
# CONFIG_DRM_SSD130X is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
#
# Frame buffer Devices
#
CONFIG_FB=y
CONFIG_FB_MACMODES=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_OF=y
# CONFIG_FB_CONTROL is not set
# CONFIG_FB_PLATINUM is not set
# CONFIG_FB_VALKYRIE is not set
CONFIG_FB_CT65550=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SM712 is not set
CONFIG_FB_CORE=y
CONFIG_FB_NOTIFY=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DEVICE is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYSMEM_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_IOMEM_FOPS=y
CONFIG_FB_IOMEM_HELPERS=y
CONFIG_FB_SYSMEM_HELPERS=y
CONFIG_FB_SYSMEM_HELPERS_DEFERRED=y
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=m
# CONFIG_BACKLIGHT_KTD2801 is not set
# CONFIG_BACKLIGHT_KTZ8866 is not set
# CONFIG_BACKLIGHT_QCOM_WLED is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
CONFIG_BACKLIGHT_LED=m
# end of Backlight & LCD device support
CONFIG_HDMI=y
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION is not set
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
# end of Console display driver support
# CONFIG_LOGO is not set
# end of Graphics support
# CONFIG_DRM_ACCEL is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACCUTOUCH is not set
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=y
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_ASUS is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_BIGBEN_FF is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_MACALLY is not set
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CREATIVE_SB0540 is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELAN is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
# CONFIG_HID_EVISION is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_FT260 is not set
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_GLORIOUS is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_GOOGLE_STADIA_FF is not set
# CONFIG_HID_VIVALDI is not set
# CONFIG_HID_GT683R is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
CONFIG_HID_UCLOGIC=m
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_VRC2 is not set
# CONFIG_HID_XIAOMI is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_ITE is not set
# CONFIG_HID_JABRA is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LED is not set
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_LETSKETCH is not set
# CONFIG_HID_LOGITECH is not set
CONFIG_HID_MAGICMOUSE=y
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_MEGAWORLD_FF is not set
# CONFIG_HID_REDRAGON is not set
CONFIG_HID_MICROSOFT=m
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
CONFIG_HID_NINTENDO=m
# CONFIG_NINTENDO_FF is not set
# CONFIG_HID_NTI is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PENMOUNT is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PXRC is not set
# CONFIG_HID_RAZER is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_RETRODE is not set
CONFIG_HID_ROCCAT=m
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SEMITEK is not set
# CONFIG_HID_SIGMAMICRO is not set
CONFIG_HID_SONY=m
# CONFIG_SONY_FF is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEAM is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_TOPRE is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_U2FZERO is not set
# CONFIG_HID_WACOM is not set
CONFIG_HID_WIIMOTE=m
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set
# CONFIG_HID_MCP2221 is not set
# end of Special HID drivers
#
# HID-BPF support
#
# end of HID-BPF support
#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
# end of USB HID support
# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
# CONFIG_USB_PCI_AMD is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_FEW_INIT_RETRIES is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_PRODUCTLIST is not set
# CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB is not set
# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_DEFAULT_AUTHORIZATION_MODE=1
CONFIG_USB_MON=m
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_XPS_USB_HCD_XILINX is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=m
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
CONFIG_USB_UAS=m
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
#
# USB dual-mode controller drivers
#
# CONFIG_USB_CDNS_SUPPORT is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set
#
# USB port drivers
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_SIMPLE is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_F8153X is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MXUPORT is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_XSENS_MT is not set
# CONFIG_USB_SERIAL_WISHBONE is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_QT2 is not set
# CONFIG_USB_SERIAL_UPD78F0730 is not set
# CONFIG_USB_SERIAL_XR is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
CONFIG_USB_APPLEDISPLAY=m
# CONFIG_APPLE_MFI_FASTCHARGE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
CONFIG_USB_ISIGHTFW=m
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HUB_USB251XB is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
# CONFIG_USB_ONBOARD_HUB is not set
#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_ISP1301 is not set
# end of USB Physical Layer drivers
# CONFIG_USB_GADGET is not set
# CONFIG_TYPEC is not set
# CONFIG_USB_ROLE_SWITCH is not set
# CONFIG_MMC is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_CLASS_MULTICOLOR is not set
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
#
# LED drivers
#
# CONFIG_LEDS_AN30259A is not set
# CONFIG_LEDS_AW200XX is not set
# CONFIG_LEDS_AW2013 is not set
# CONFIG_LEDS_BCM6328 is not set
# CONFIG_LEDS_BCM6358 is not set
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3532 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_LM3692X is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP8860 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_PCA995X is not set
# CONFIG_LEDS_BD2606MVV is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_IS31FL319X is not set
# CONFIG_LEDS_IS31FL32XX is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_LM3697 is not set
#
# Flash and Torch LED drivers
#
#
# RGB LED drivers
#
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
CONFIG_LEDS_TRIGGER_DISK=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_LEDS_TRIGGER_CAMERA is not set
CONFIG_LEDS_TRIGGER_PANIC=y
# CONFIG_LEDS_TRIGGER_NETDEV is not set
# CONFIG_LEDS_TRIGGER_PATTERN is not set
# CONFIG_LEDS_TRIGGER_AUDIO is not set
# CONFIG_LEDS_TRIGGER_TTY is not set
#
# Simple LED drivers
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABEOZ9 is not set
# CONFIG_RTC_DRV_ABX80X is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_HYM8563 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_NCT3018Y is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_ISL12026 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3028 is not set
# CONFIG_RTC_DRV_RV3032 is not set
# CONFIG_RTC_DRV_RV8803 is not set
# CONFIG_RTC_DRV_SD3078 is not set
#
# SPI RTC drivers
#
CONFIG_RTC_I2C_AND_SPI=y
#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
# CONFIG_RTC_DRV_RX6110 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_ZYNQMP is not set
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_GENERIC=y
# CONFIG_RTC_DRV_CADENCE is not set
# CONFIG_RTC_DRV_FTRTC010 is not set
# CONFIG_RTC_DRV_R7301 is not set
#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_GOLDFISH is not set
# CONFIG_DMADEVICES is not set
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
CONFIG_UDMABUF=y
# CONFIG_DMABUF_MOVE_NOTIFY is not set
CONFIG_DMABUF_DEBUG=y
CONFIG_DMABUF_SELFTESTS=m
CONFIG_DMABUF_HEAPS=y
# CONFIG_DMABUF_SYSFS_STATS is not set
CONFIG_DMABUF_HEAPS_SYSTEM=y
# end of DMABUF options
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_PCI_LIB=y
CONFIG_VIRTIO_PCI_LIB_LEGACY=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VIRTIO_INPUT is not set
# CONFIG_VIRTIO_MMIO is not set
CONFIG_VIRTIO_DMA_SHARED_BUFFER=m
# CONFIG_VDPA is not set
CONFIG_VHOST_IOTLB=m
CONFIG_VHOST_TASK=y
CONFIG_VHOST=m
CONFIG_VHOST_MENU=y
CONFIG_VHOST_NET=m
# CONFIG_VHOST_VSOCK is not set
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support
# CONFIG_GREYBUS is not set
# CONFIG_COMEDI is not set
# CONFIG_STAGING is not set
# CONFIG_GOLDFISH is not set
# CONFIG_COMMON_CLK is not set
# CONFIG_HWSPINLOCK is not set
#
# Clock Source drivers
#
# end of Clock Source drivers
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
# end of Generic IOMMU Pagetable Support
# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMUFD is not set
#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers
#
# Rpmsg drivers
#
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers
# CONFIG_SOUNDWIRE is not set
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers
#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# CONFIG_QUICC_ENGINE is not set
# end of NXP/Freescale QorIQ SoC drivers
#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers
#
# i.MX SoC drivers
#
# end of i.MX SoC drivers
#
# Enable LiteX SoC Builder specific drivers
#
# CONFIG_LITEX_SOC_CONTROLLER is not set
# end of Enable LiteX SoC Builder specific drivers
# CONFIG_WPCM450_SOC is not set
#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers
# CONFIG_SOC_TI is not set
#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
#
# PM Domains
#
#
# Amlogic PM Domains
#
# end of Amlogic PM Domains
#
# Broadcom PM Domains
#
# end of Broadcom PM Domains
#
# i.MX PM Domains
#
# end of i.MX PM Domains
#
# Qualcomm PM Domains
#
# end of Qualcomm PM Domains
# end of PM Domains
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_PWM is not set
#
# IRQ chip support
#
CONFIG_IRQCHIP=y
# CONFIG_AL_FIC is not set
# CONFIG_XILINX_INTC is not set
# end of IRQ chip support
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_PHY_CAN_TRANSCEIVER is not set
#
# PHY drivers for Broadcom platforms
#
# CONFIG_BCM_KONA_USB2_PHY is not set
# end of PHY drivers for Broadcom platforms
# CONFIG_PHY_CADENCE_DPHY is not set
# CONFIG_PHY_CADENCE_DPHY_RX is not set
# CONFIG_PHY_CADENCE_SALVO is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# end of PHY Subsystem
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
#
# Performance monitor support
#
# CONFIG_DWC_PCIE_PMU is not set
# end of Performance monitor support
# CONFIG_RAS is not set
# CONFIG_USB4 is not set
#
# Android
#
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android
# CONFIG_DAX is not set
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
CONFIG_NVMEM_LAYOUTS=y
#
# Layout Types
#
# CONFIG_NVMEM_LAYOUT_SL28_VPD is not set
# CONFIG_NVMEM_LAYOUT_ONIE_TLV is not set
# end of Layout Types
# CONFIG_NVMEM_RMEM is not set
#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# end of HW tracing support
# CONFIG_FPGA is not set
# CONFIG_FSI is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# CONFIG_MOST is not set
# CONFIG_PECI is not set
# CONFIG_HTE is not set
# end of Device Drivers
#
# File systems
#
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
CONFIG_FS_STACK=y
CONFIG_BUFFER_HEAD=y
CONFIG_LEGACY_DIRECT_IO=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_SUPPORT_V4 is not set
# CONFIG_XFS_SUPPORT_ASCII_CI is not set
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_ONLINE_SCRUB is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_FS_REF_VERIFY is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
# CONFIG_BCACHEFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=m
# CONFIG_CUSE is not set
CONFIG_VIRTIO_FS=m
CONFIG_FUSE_PASSTHROUGH=y
# CONFIG_OVERLAY_FS is not set
#
# Caches
#
CONFIG_NETFS_SUPPORT=y
# CONFIG_NETFS_STATS is not set
# CONFIG_FSCACHE is not set
# end of Caches
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
CONFIG_FAT_DEFAULT_UTF8=y
CONFIG_EXFAT_FS=m
CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8"
CONFIG_NTFS3_FS=m
CONFIG_NTFS3_LZX_XPRESS=y
# CONFIG_NTFS3_FS_POSIX_ACL is not set
# CONFIG_NTFS_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_TMPFS_QUOTA is not set
CONFIG_CONFIGFS_FS=m
# end of Pseudo filesystems
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
# CONFIG_ECRYPT_FS is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
CONFIG_BEFS_DEBUG=y
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EROFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
# CONFIG_NFS_V2 is not set
# CONFIG_NFS_V3 is not set
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_FLEXFILE_LAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
CONFIG_NFS_V4_SECURITY_LABEL=y
# CONFIG_NFS_FSCACHE is not set
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFS_DISABLE_UDP_SUPPORT=y
# CONFIG_NFS_V4_2_READ_PLUS is not set
# CONFIG_NFSD is not set
CONFIG_GRACE_PERIOD=m
CONFIG_LOCKD=m
CONFIG_NFS_COMMON=y
CONFIG_NFS_V4_2_SSC_HELPER=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_BACKCHANNEL=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
CONFIG_SUNRPC_DEBUG=y
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
# CONFIG_CIFS_UPCALL is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_SWN_UPCALL=y
# CONFIG_SMB_SERVER is not set
CONFIG_SMBFS=m
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=y
CONFIG_9P_FS_POSIX_ACL=y
# CONFIG_9P_FS_SECURITY is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=m
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_MAC_ROMAN=m
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
CONFIG_NLS_UCS2_UTILS=m
# CONFIG_DLM is not set
CONFIG_UNICODE=m
# CONFIG_UNICODE_NORMALIZATION_SELFTEST is not set
CONFIG_IO_WQ=y
# end of File systems
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_REQUEST_CACHE=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_TRUSTED_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
CONFIG_KEY_DH_OPERATIONS=y
CONFIG_KEY_NOTIFICATIONS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_PATH is not set
CONFIG_HARDENED_USERCOPY=y
CONFIG_FORTIFY_SOURCE=y
# CONFIG_STATIC_USERMODEHELPER is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_LOADPIN is not set
CONFIG_SECURITY_YAMA=y
# CONFIG_SECURITY_SAFESETID is not set
# CONFIG_SECURITY_LOCKDOWN_LSM is not set
# CONFIG_SECURITY_LANDLOCK is not set
# CONFIG_INTEGRITY is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
# CONFIG_INIT_STACK_NONE is not set
CONFIG_INIT_STACK_ALL_PATTERN=y
# CONFIG_INIT_STACK_ALL_ZERO is not set
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
# CONFIG_ZERO_CALL_USED_REGS is not set
# end of Memory initialization
#
# Hardening of kernel data structures
#
CONFIG_LIST_HARDENED=y
CONFIG_BUG_ON_DATA_CORRUPTION=y
# end of Hardening of kernel data structures
CONFIG_RANDSTRUCT_NONE=y
# end of Kernel hardening options
# end of Security options
CONFIG_XOR_BLOCKS=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SIG=y
CONFIG_CRYPTO_SIG2=y
CONFIG_CRYPTO_SKCIPHER=m
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=m
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
# CONFIG_CRYPTO_MANAGER_EXTRA_TESTS is not set
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_NULL2=m
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_ENGINE=m
# end of Crypto core or helper
#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=m
CONFIG_CRYPTO_DH=y
# CONFIG_CRYPTO_DH_RFC7919_GROUPS is not set
CONFIG_CRYPTO_ECC=m
CONFIG_CRYPTO_ECDH=m
# CONFIG_CRYPTO_ECDSA is not set
# CONFIG_CRYPTO_ECRDSA is not set
# CONFIG_CRYPTO_SM2 is not set
# CONFIG_CRYPTO_CURVE25519 is not set
# end of Public-key cryptography
#
# Block ciphers
#
CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_AES_TI is not set
# CONFIG_CRYPTO_ARIA is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SM4_GENERIC is not set
# CONFIG_CRYPTO_TWOFISH is not set
# end of Block ciphers
#
# Length-preserving ciphers and modes
#
# CONFIG_CRYPTO_ADIANTUM is not set
# CONFIG_CRYPTO_CHACHA20 is not set
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_HCTR2 is not set
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=m
# end of Length-preserving ciphers and modes
#
# AEAD (authenticated encryption with associated data) ciphers
#
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_GENIV=m
CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_ECHAINIV=m
CONFIG_CRYPTO_ESSIV=m
# end of AEAD (authenticated encryption with associated data) ciphers
#
# Hashes, digests, and MACs
#
CONFIG_CRYPTO_BLAKE2B=y
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_SHA3=m
# CONFIG_CRYPTO_SM3_GENERIC is not set
# CONFIG_CRYPTO_STREEBOG is not set
# CONFIG_CRYPTO_VMAC is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_XXHASH=y
# end of Hashes, digests, and MACs
#
# CRCs (cyclic redundancy checks)
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRCT10DIF is not set
# end of CRCs (cyclic redundancy checks)
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
# CONFIG_CRYPTO_ZSTD is not set
# end of Compression
#
# Random number generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DRBG_MENU=m
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=m
CONFIG_CRYPTO_JITTERENTROPY=m
CONFIG_CRYPTO_JITTERENTROPY_MEMORY_BLOCKS=64
CONFIG_CRYPTO_JITTERENTROPY_MEMORY_BLOCKSIZE=32
CONFIG_CRYPTO_JITTERENTROPY_OSR=1
CONFIG_CRYPTO_KDF800108_CTR=y
# end of Random number generation
#
# Userspace interface
#
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_USER_API_RNG=m
# CONFIG_CRYPTO_USER_API_RNG_CAVP is not set
CONFIG_CRYPTO_USER_API_AEAD=m
# CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE is not set
# CONFIG_CRYPTO_STATS is not set
# end of Userspace interface
CONFIG_CRYPTO_HASH_INFO=y
#
# Accelerated Cryptographic Algorithms for CPU (powerpc)
#
CONFIG_CRYPTO_MD5_PPC=m
CONFIG_CRYPTO_SHA1_PPC=m
# end of Accelerated Cryptographic Algorithms for CPU (powerpc)
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
CONFIG_CRYPTO_DEV_VIRTIO=m
# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
# CONFIG_CRYPTO_DEV_CCREE is not set
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_FIPS_SIGNATURE_SELFTEST is not set
#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
# end of Certificates for signature checking
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_RAID6_PQ_BENCHMARK=y
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
# CONFIG_CORDIC is not set
# CONFIG_PRIME_NUMBERS is not set
#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LIB_AES=m
CONFIG_CRYPTO_LIB_GF128MUL=m
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=m
CONFIG_CRYPTO_LIB_CHACHA=m
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=m
CONFIG_CRYPTO_LIB_CURVE25519=m
CONFIG_CRYPTO_LIB_DES=m
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=m
CONFIG_CRYPTO_LIB_POLY1305=m
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=m
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC64_ROCKSOFT is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC64 is not set
# CONFIG_CRC4 is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_ZSTD_COMMON=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
# CONFIG_XZ_DEC is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_ARCH_DMA_DEFAULT_COHERENT=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
# CONFIG_FORCE_NR_CPUS is not set
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_CLZ_TAB=y
# CONFIG_IRQ_POLL is not set
CONFIG_MPILIB=y
CONFIG_DIMLIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_FONT_SUN8x16=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_STACKDEPOT_MAX_FRAMES=64
CONFIG_SBITMAP=y
# CONFIG_LWQ_TEST is not set
# end of Library routines
CONFIG_GENERIC_IOREMAP=y
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DYNAMIC_DEBUG_CORE is not set
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_MISC is not set
#
# Compile-time checks and compiler options
#
CONFIG_AS_HAS_NON_CONST_ULEB128=y
CONFIG_DEBUG_INFO_NONE=y
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_DWARF5 is not set
CONFIG_FRAME_WARN=1024
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B is not set
# CONFIG_VMLINUX_MAP is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN=y
# CONFIG_UBSAN is not set
CONFIG_HAVE_ARCH_KCSAN=y
CONFIG_HAVE_KCSAN_COMPILER=y
# CONFIG_KCSAN is not set
# end of Generic Kernel Debugging Instruments
#
# Networking Debugging
#
# CONFIG_NET_DEV_REFCNT_TRACKER is not set
# CONFIG_NET_NS_REFCNT_TRACKER is not set
# CONFIG_DEBUG_NET is not set
# end of Networking Debugging
#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_DEBUG_PAGEALLOC=y
# CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT is not set
CONFIG_SLUB_DEBUG=y
# CONFIG_SLUB_DEBUG_ON is not set
CONFIG_PAGE_OWNER=y
CONFIG_PAGE_POISONING=y
CONFIG_DEBUG_RODATA_TEST=y
CONFIG_ARCH_HAS_DEBUG_WX=y
CONFIG_DEBUG_WX=y
CONFIG_GENERIC_PTDUMP=y
CONFIG_PTDUMP_CORE=y
# CONFIG_PTDUMP_DEBUGFS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SHRINKER_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_VM_PGTABLE=y
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_DEBUG_KMAP_LOCAL is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# CONFIG_KASAN is not set
CONFIG_HAVE_ARCH_KFENCE=y
# CONFIG_KFENCE is not set
# end of Memory Debugging
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_HAVE_HARDLOCKUP_DETECTOR_BUDDY=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_HARDLOCKUP_DETECTOR_PERF is not set
CONFIG_HARDLOCKUP_DETECTOR_BUDDY=y
# CONFIG_HARDLOCKUP_DETECTOR_ARCH is not set
CONFIG_HARDLOCKUP_DETECTOR_COUNTS_HRTIMER=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=60
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_WQ_WATCHDOG=y
# CONFIG_WQ_CPU_INTENSIVE_REPORT is not set
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHED_INFO=y
# CONFIG_SCHEDSTATS is not set
# end of Scheduler Debugging
# CONFIG_DEBUG_TIMEKEEPING is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
CONFIG_DEBUG_RWSEMS=y
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)
# CONFIG_DEBUG_IRQFLAGS is not set
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PLIST is not set
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_DEBUG_MAPLE_TREE=y
# end of Debug kernel data structures
#
# RCU Debugging
#
# CONFIG_RCU_SCALE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_REF_SCALE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
CONFIG_RCU_CPU_STALL_CPUTIME=y
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_OBJTOOL_MCOUNT=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
CONFIG_IO_STRICT_DEVMEM=y
#
# powerpc Debugging
#
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_JUMP_LABEL_FEATURE_CHECKS is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
# CONFIG_BDI_SWITCH is not set
CONFIG_BOOTX_TEXT=y
# CONFIG_PPC_EARLY_DEBUG is not set
# end of powerpc Debugging
#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
# CONFIG_RUNTIME_TESTING_MENU is not set
CONFIG_ARCH_USE_MEMTEST=y
# CONFIG_MEMTEST is not set
# end of Kernel Testing and Coverage
#
# Rust hacking
#
# end of Rust hacking
# end of Kernel hacking
#
# Gentoo Linux
#
CONFIG_GENTOO_LINUX=y
CONFIG_GENTOO_LINUX_UDEV=y
CONFIG_GENTOO_LINUX_PORTAGE=y
#
# Support for init systems, system and service managers
#
CONFIG_GENTOO_LINUX_INIT_SCRIPT=y
CONFIG_GENTOO_LINUX_INIT_SYSTEMD=y
# end of Support for init systems, system and service managers
# CONFIG_GENTOO_KERNEL_SELF_PROTECTION is not set
CONFIG_GENTOO_PRINT_FIRMWARE_INFO=y
# end of Gentoo Linux
[-- Attachment #3: dmesg_6192_g4 --]
[-- Type: application/octet-stream, Size: 40695 bytes --]
[ 0.000000] Total memory = 2048MB; using 4096kB for hash table
[ 0.000000] Activating Kernel Userspace Access Protection
[ 0.000000] Activating Kernel Userspace Execution Prevention
[ 0.000000] Linux version 6.1.92-PMacG4 (root@T1000) (gcc (Gentoo 13.2.1_p20240210 p14) 13.2.1 20240210, GNU ld (Gentoo 2.42 p3) 2.42.0) #1 SMP Sun Jun 2 17:02:37 CEST 2024
[ 0.000000] ioremap() called early from pmac_feature_init+0x264/0xa18. Use early_ioremap() instead
[ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0x24
[ 0.000000] Mapped at 0xff3bf000
[ 0.000000] ioremap() called early from probe_one_macio+0xf4/0x22c. Use early_ioremap() instead
[ 0.000000] Found a Keylargo mac-io controller, rev: 3, mapped at 0x(ptrval)
[ 0.000000] PowerMac motherboard: PowerMac G4 Windtunnel
[ 0.000000] ioremap() called early from btext_map+0x5c/0x7c. Use early_ioremap() instead
[ 0.000000] Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
[ 0.000000] printk: bootconsole [udbg0] enabled
[ 0.000000] CPU maps initialized for 1 thread per core
[ 0.000000] (thread shift is 0)
[ 0.000000] -----------------------------------------------------
[ 0.000000] phys_mem_size = 0x80000000
[ 0.000000] dcache_bsize = 0x20
[ 0.000000] icache_bsize = 0x20
[ 0.000000] cpu_features = 0x000000002514600a
[ 0.000000] possible = 0x00000000277de00a
[ 0.000000] always = 0x0000000001000000
[ 0.000000] cpu_user_features = 0x9c000001 0x00000000
[ 0.000000] mmu_features = 0x00010001
[ 0.000000] Hash_size = 0x400000
[ 0.000000] Hash_mask = 0xffff
[ 0.000000] -----------------------------------------------------
[ 0.000000] ioremap() called early from pmac_setup_arch+0xc4/0x238. Use early_ioremap() instead
[ 0.000000] ioremap() called early from find_via_pmu+0x258/0x4d8. Use early_ioremap() instead
[ 0.000000] ioremap() called early from find_via_pmu+0xf4/0x4d8. Use early_ioremap() instead
[ 0.000000] via-pmu: Server Mode is disabled
[ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c
[ 0.000000] ioremap() called early from pmac_nvram_init+0x178/0x4f8. Use early_ioremap() instead
[ 0.000000] nvram: Checking bank 0...
[ 0.000000] nvram: gen0=3427, gen1=3428
[ 0.000000] nvram: Active bank is: 1
[ 0.000000] nvram: OF partition at 0x410
[ 0.000000] nvram: XP partition at 0x1020
[ 0.000000] nvram: NR partition at 0x1120
[ 0.000000] Top of RAM: 0x80000000, Total RAM: 0x80000000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
[ 0.000000] Normal empty
[ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] percpu: Embedded 13 pages/cpu s23776 r8192 d21280 u53248
[ 0.000000] pcpu-alloc: s23776 r8192 d21280 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560
[ 0.000000] Kernel command line: ro root=/dev/sda5 slub_debug=FZP page_poison=1 netconsole=6666@192.168.2.8/eth0,6666@192.168.2.3/A8:A1:59:16:4F:EA debug
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] mem auto-init: stack:all(pattern), heap alloc:off, heap free:off
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xffbbf000..0xfffff000 : fixmap
[ 0.000000] * 0xff400000..0xff800000 : highmem PTEs
[ 0.000000] * 0xff115000..0xff400000 : early ioremap
[ 0.000000] * 0xf1000000..0xff115000 : vmalloc & ioremap
[ 0.000000] * 0xb0000000..0xc0000000 : modules
[ 0.000000] Memory: 2059156K/2097152K available (7236K kernel code, 524K rwdata, 5052K rodata, 1076K init, 278K bss, 37996K reserved, 0K cma-reserved, 1310720K highmem)
[ 0.000000] **********************************************************
[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.000000] ** **
[ 0.000000] ** This system shows unhashed kernel memory addresses **
[ 0.000000] ** via the console, logs, and other interfaces. This **
[ 0.000000] ** might reduce the security of your system. **
[ 0.000000] ** **
[ 0.000000] ** If you see this message and you are not debugging **
[ 0.000000] ** the kernel, report this immediately to your system **
[ 0.000000] ** administrator! **
[ 0.000000] ** **
[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.000000] **********************************************************
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
[ 0.000000] mpic: Resetting
[ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 2 CPUs
[ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f
[ 0.000000] mpic: Initializing for 64 sources
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] time_init: decrementer frequency = 41.658676 MHz
[ 0.000000] time_init: processor frequency = 1416.666661 MHz
[ 0.000005] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x99b9699db, max_idle_ns: 440795204297 ns
[ 0.000555] clocksource: timebase mult[18012db2] shift[24] registered
[ 0.001050] clockevent: decrementer mult[aaa249b] shift[32] cpu[0]
[ 0.001984] Console: colour dummy device 80x25
[ 0.002442] printk: console [tty0] enabled
[ 0.002888] printk: bootconsole [udbg0] disabled
[ 0.003373] pid_max: default: 32768 minimum: 301
[ 0.003805] LSM: Security Framework initializing
[ 0.003841] Yama: becoming mindful.
[ 0.004163] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.004210] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.007714] PowerMac SMP probe found 2 cpus
[ 0.008006] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
[ 0.008052] channel 0 bus <multibus>
[ 0.008072] channel 1 bus <multibus>
[ 0.008149] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
[ 0.008184] channel 0 bus <multibus>
[ 0.008239] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c
[ 0.008271] channel 1 bus <multibus>
[ 0.008289] channel 2 bus <multibus>
[ 0.008311] pmf: no parser for command 17 !
[ 0.008366] Processor timebase sync using GPIO 0x73
[ 0.008378] mpic: requesting IPIs...
[ 0.008443] CPU0: L2CR is 80000000
[ 0.008455] CPU0: L3CR is 9c030000
[ 0.009453] cblist_init_generic: Setting adjustable number of callback queues.
[ 0.009485] cblist_init_generic: Setting shift to 1 and lim to 1.
[ 0.009626] MPC7450 family performance monitor hardware support registered
[ 0.009941] rcu: Hierarchical SRCU implementation.
[ 0.009960] rcu: Max phase no-delay instances is 1000.
[ 0.010721] smp: Bringing up secondary CPUs ...
[84919681.237605] CPU1: L2CR was 0
[84919681.237655] CPU1: L2CR set to 80000000
[84919681.237661] CPU1: L3CR was 0
[84919681.237807] CPU1: L3CR set to 9c030000
[ 0.013650] smp: Brought up 1 node, 2 CPUs
[ 0.015492] devtmpfs: initialized
[ 0.016187] Duplicate name in PowerPC,G4@0, renamed to "l2-cache#1"
[ 0.016302] Duplicate name in l2-cache#1, renamed to "l2-cache#1"
[ 0.016798] Duplicate name in PowerPC,G4@1, renamed to "l2-cache#1"
[ 0.016910] Duplicate name in l2-cache#1, renamed to "l2-cache#1"
[ 0.022049] Duplicate name in gpio@50, renamed to "gpio5@6f#1"
[ 0.022142] Duplicate name in gpio@50, renamed to "gpio6@70#1"
[ 0.022302] Duplicate name in gpio@50, renamed to "gpio11@75#1"
[ 0.022450] Duplicate name in gpio@50, renamed to "extint-gpio15@67#1"
[ 0.029072] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0
[ 0.029111] PCI host bridge /pci@f0000000 ranges:
[ 0.029145] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000
[ 0.029172] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
[ 0.029298] MEM 0x0000000090000000..0x00000000afffffff -> 0x0000000090000000
[ 0.029352] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0
[ 0.029373] PCI host bridge /pci@f2000000 (primary) ranges:
[ 0.029400] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000
[ 0.029426] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000
[ 0.029539] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000
[ 0.029595] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0
[ 0.029616] PCI host bridge /pci@f4000000 ranges:
[ 0.029642] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000
[ 0.029665] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000
[ 0.029867] Found NEC PD720100A USB2 chip with disabled EHCI, fixing up...
[ 0.030142] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.030234] futex hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.031720] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.036901] PCI: Probing PCI hardware
[ 0.037439] PCI host bridge to bus 0000:00
[ 0.037468] pci_bus 0000:00: root bus resource [io 0xff780000-0xfff7ffff] (bus address [0x0000-0x7fffff])
[ 0.037497] pci_bus 0000:00: root bus resource [mem 0xf1000000-0xf1ffffff]
[ 0.037517] pci_bus 0000:00: root bus resource [mem 0x90000000-0xafffffff]
[ 0.037539] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.037559] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.038100] pci 0000:00:0b.0: [106b:0034] type 00 class 0x060000
[ 0.038676] pci 0000:00:10.0: [1002:4150] type 00 class 0x030000
[ 0.038713] pci 0000:00:10.0: reg 0x10: [mem 0xa0000000-0xafffffff pref]
[ 0.038738] pci 0000:00:10.0: reg 0x14: [io 0xff780400-0xff7804ff]
[ 0.038762] pci 0000:00:10.0: reg 0x18: [mem 0x90000000-0x9000ffff]
[ 0.038802] pci 0000:00:10.0: reg 0x30: [mem 0x90020000-0x9003ffff pref]
[ 0.038857] pci 0000:00:10.0: supports D1 D2
[ 0.039670] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.040265] OF: /pci@f2000000/mac-io@17/gpio@50/gpio5@6f: could not find phandle 1751474532
[ 0.040333] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio15@67: could not find phandle 1751474532
[ 0.040404] OF: /pci@f2000000/mac-io@17/gpio@50/gpio6@70: could not find phandle 1634562093
[ 0.040468] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio16@68: could not find phandle 1936745825
[ 0.040542] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio14@66: could not find phandle 1818848869
[ 0.040612] OF: /pci@f2000000/mac-io@17/gpio@50/gpio12@76: could not find phandle 1835103092
[ 0.040674] OF: /pci@f2000000/mac-io@17/gpio@50/gpio11@75: could not find phandle 1635083369
[ 0.040731] OF: /pci@f2000000/mac-io@17/gpio@50/gpio5@6f: could not find phandle 1751474532
[ 0.040788] OF: /pci@f2000000/mac-io@17/gpio@50/gpio6@70: could not find phandle 1634562093
[ 0.040845] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio4@5c: could not find phandle 1818848869
[ 0.040916] OF: /pci@f2000000/mac-io@17/gpio@50/gpio11@75: could not find phandle 1635083369
[ 0.040973] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio15@67: could not find phandle 1751474532
[ 0.042368] pci_bus 0001:10: Fixed dependency cycle(s) with /pci@f2000000/mac-io@17/interrupt-controller@40000
[ 0.042477] PCI host bridge to bus 0001:10
[ 0.042494] pci_bus 0001:10: root bus resource [io 0x0000-0x7fffff]
[ 0.042514] pci_bus 0001:10: root bus resource [mem 0xf3000000-0xf3ffffff]
[ 0.042533] pci_bus 0001:10: root bus resource [mem 0x80000000-0x8fffffff]
[ 0.042555] pci_bus 0001:10: root bus resource [bus 10-ff]
[ 0.042573] pci_bus 0001:10: busn_res: [bus 10-ff] end is updated to ff
[ 0.043044] pci 0001:10:0b.0: [106b:0035] type 00 class 0x060000
[ 0.043609] pci 0001:10:12.0: [1033:0035] type 00 class 0x0c0310
[ 0.043646] pci 0001:10:12.0: reg 0x10: [mem 0x8008c000-0x8008cfff]
[ 0.043723] pci 0001:10:12.0: supports D1 D2
[ 0.043738] pci 0001:10:12.0: PME# supported from D0 D1 D2 D3hot
[ 0.044197] pci 0001:10:12.1: [1033:0035] type 00 class 0x0c0310
[ 0.044233] pci 0001:10:12.1: reg 0x10: [mem 0x8008b000-0x8008bfff]
[ 0.044309] pci 0001:10:12.1: supports D1 D2
[ 0.044324] pci 0001:10:12.1: PME# supported from D0 D1 D2 D3hot
[ 0.044623] pci 0001:10:12.2: [1033:00e0] type 00 class 0x0c0320
[ 0.044656] pci 0001:10:12.2: reg 0x10: [mem 0x80081000-0x800810ff]
[ 0.044751] pci 0001:10:12.2: supports D1 D2
[ 0.044767] pci 0001:10:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.045069] pci 0001:10:13.0: [1095:3112] type 00 class 0x018000
[ 0.045103] pci 0001:10:13.0: reg 0x10: [io 0x0460-0x0467]
[ 0.045125] pci 0001:10:13.0: reg 0x14: [io 0x0450-0x0453]
[ 0.045147] pci 0001:10:13.0: reg 0x18: [io 0x0440-0x0447]
[ 0.045168] pci 0001:10:13.0: reg 0x1c: [io 0x0430-0x0433]
[ 0.045190] pci 0001:10:13.0: reg 0x20: [io 0x0420-0x042f]
[ 0.045212] pci 0001:10:13.0: reg 0x24: [mem 0x80082000-0x800821ff]
[ 0.045234] pci 0001:10:13.0: reg 0x30: [mem 0x80100000-0x8017ffff pref]
[ 0.045283] pci 0001:10:13.0: supports D1 D2
[ 0.045634] pci 0001:10:15.0: [9710:9865] type 00 class 0x070002
[ 0.045668] pci 0001:10:15.0: reg 0x10: [io 0x0410-0x0417]
[ 0.045691] pci 0001:10:15.0: reg 0x14: [mem 0x8008a000-0x8008afff]
[ 0.045723] pci 0001:10:15.0: reg 0x20: [mem 0x80089000-0x80089fff]
[ 0.045783] pci 0001:10:15.0: supports D1 D2
[ 0.045798] pci 0001:10:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.046104] pci 0001:10:15.1: [9710:9865] type 00 class 0x070002
[ 0.046139] pci 0001:10:15.1: reg 0x10: [io 0x0400-0x0407]
[ 0.046161] pci 0001:10:15.1: reg 0x14: [mem 0x80088000-0x80088fff]
[ 0.046194] pci 0001:10:15.1: reg 0x20: [mem 0x80087000-0x80087fff]
[ 0.046253] pci 0001:10:15.1: supports D1 D2
[ 0.046268] pci 0001:10:15.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.046726] pci 0001:10:15.2: [ffff:9865] type 00 class 0x070103
[ 0.046761] pci 0001:10:15.2: reg 0x10: [io 0x0000-0x0007]
[ 0.046783] pci 0001:10:15.2: reg 0x14: [io 0x0000-0x0007]
[ 0.046805] pci 0001:10:15.2: reg 0x18: [mem 0x00000000-0x00000fff]
[ 0.046833] pci 0001:10:15.2: reg 0x20: [mem 0x00000000-0x00000fff]
[ 0.046892] pci 0001:10:15.2: supports D1 D2
[ 0.046907] pci 0001:10:15.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.047198] pci 0001:10:16.0: [14e4:4320] type 00 class 0x028000
[ 0.047231] pci 0001:10:16.0: reg 0x10: [mem 0x8008e000-0x8008ffff]
[ 0.047305] pci 0001:10:16.0: supports D1 D2
[ 0.047320] pci 0001:10:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.047600] pci 0001:10:17.0: [106b:0022] type 00 class 0xff0000
[ 0.047633] pci 0001:10:17.0: reg 0x10: [mem 0x80000000-0x8007ffff]
[ 0.048139] pci 0001:10:18.0: [106b:0019] type 00 class 0x0c0310
[ 0.048174] pci 0001:10:18.0: reg 0x10: [mem 0x80086000-0x80086fff]
[ 0.048489] pci 0001:10:19.0: [106b:0019] type 00 class 0x0c0310
[ 0.048522] pci 0001:10:19.0: reg 0x10: [mem 0x80085000-0x80085fff]
[ 0.049062] pci 0001:10:1b.0: [1033:0035] type 00 class 0x0c0310
[ 0.049099] pci 0001:10:1b.0: reg 0x10: [mem 0x80084000-0x80084fff]
[ 0.049178] pci 0001:10:1b.0: supports D1 D2
[ 0.049193] pci 0001:10:1b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.049510] pci 0001:10:1b.1: [1033:0035] type 00 class 0x0c0310
[ 0.049544] pci 0001:10:1b.1: reg 0x10: [mem 0x80083000-0x80083fff]
[ 0.049620] pci 0001:10:1b.1: supports D1 D2
[ 0.049635] pci 0001:10:1b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.049959] pci 0001:10:1b.2: [1033:00e0] type 00 class 0x0c0320
[ 0.049993] pci 0001:10:1b.2: reg 0x10: [mem 0x80080000-0x800800ff]
[ 0.050068] pci 0001:10:1b.2: supports D1 D2
[ 0.050083] pci 0001:10:1b.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.050499] pci_bus 0001:10: busn_res: [bus 10-ff] end is updated to 10
[ 0.051753] PCI host bridge to bus 0002:20
[ 0.051779] pci_bus 0002:20: root bus resource [io 0x880000-0x107ffff] (bus address [0x0000-0x7fffff])
[ 0.051805] pci_bus 0002:20: root bus resource [mem 0xf5000000-0xf5ffffff]
[ 0.051826] pci_bus 0002:20: root bus resource [bus 20-ff]
[ 0.051844] pci_bus 0002:20: busn_res: [bus 20-ff] end is updated to ff
[ 0.052314] pci 0002:20:0b.0: [106b:0036] type 00 class 0x060000
[ 0.052682] pci 0002:20:0d.0: [106b:0033] type 00 class 0xff0000
[ 0.052716] pci 0002:20:0d.0: reg 0x10: [mem 0xf5004000-0xf5007fff]
[ 0.053174] pci 0002:20:0e.0: [106b:0031] type 00 class 0x0c0010
[ 0.053207] pci 0002:20:0e.0: reg 0x10: [mem 0xf5000000-0xf5000fff]
[ 0.053276] pci 0002:20:0e.0: supports D1 D2
[ 0.053292] pci 0002:20:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.053582] pci 0002:20:0f.0: [106b:0032] type 00 class 0x020000
[ 0.053615] pci 0002:20:0f.0: reg 0x10: [mem 0xf5200000-0xf53fffff]
[ 0.053664] pci 0002:20:0f.0: reg 0x30: [mem 0xf5100000-0xf51fffff pref]
[ 0.054509] pci_bus 0002:20: busn_res: [bus 20-ff] end is updated to 20
[ 0.055078] PCI 0000:00 Cannot reserve Legacy IO [io 0xff780000-0xff780fff]
[ 0.055114] PCI 0001:10 Cannot reserve Legacy IO [io 0x0000-0x0fff]
[ 0.055145] pci_bus 0000:00: resource 4 [io 0xff780000-0xfff7ffff]
[ 0.055164] pci_bus 0000:00: resource 5 [mem 0xf1000000-0xf1ffffff]
[ 0.055181] pci_bus 0000:00: resource 6 [mem 0x90000000-0xafffffff]
[ 0.055253] pci 0001:10:15.2: BAR 2: assigned [mem 0xf3000000-0xf3000fff]
[ 0.055279] pci 0001:10:15.2: BAR 4: assigned [mem 0xf3001000-0xf3001fff]
[ 0.055301] pci 0001:10:15.2: BAR 0: assigned [io 0x1000-0x1007]
[ 0.055321] pci 0001:10:15.2: BAR 1: assigned [io 0x1008-0x100f]
[ 0.055352] pci_bus 0001:10: resource 4 [io 0x0000-0x7fffff]
[ 0.055369] pci_bus 0001:10: resource 5 [mem 0xf3000000-0xf3ffffff]
[ 0.055387] pci_bus 0001:10: resource 6 [mem 0x80000000-0x8fffffff]
[ 0.055406] pci_bus 0002:20: resource 4 [io 0x880000-0x107ffff]
[ 0.055423] pci_bus 0002:20: resource 5 [mem 0xf5000000-0xf5ffffff]
[ 0.128261] raid6: altivecx8 gen() 3339 MB/s
[ 0.185017] raid6: altivecx4 gen() 3425 MB/s
[ 0.241774] raid6: altivecx2 gen() 3192 MB/s
[ 0.298524] raid6: altivecx1 gen() 2445 MB/s
[ 0.355316] raid6: int32x8 gen() 353 MB/s
[ 0.412039] raid6: int32x4 gen() 449 MB/s
[ 0.468798] raid6: int32x2 gen() 826 MB/s
[ 0.525553] raid6: int32x1 gen() 547 MB/s
[ 0.525567] raid6: using algorithm altivecx4 gen() 3425 MB/s
[ 0.525582] raid6: using intx1 recovery algorithm
[ 0.527462] SCSI subsystem initialized
[ 0.527875] libata version 3.00 loaded.
[ 0.528266] usbcore: registered new interface driver usbfs
[ 0.528378] usbcore: registered new interface driver hub
[ 0.528465] usbcore: registered new device driver usb
[ 0.530610] pci 0000:00:10.0: vgaarb: setting as boot VGA device
[ 0.530642] pci 0000:00:10.0: vgaarb: bridge control possible
[ 0.530658] pci 0000:00:10.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
[ 0.530701] vgaarb: loaded
[ 0.530943] clocksource: Switched to clocksource timebase
[ 0.549342] NET: Registered PF_INET protocol family
[ 0.550243] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.552439] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 10240 bytes, linear)
[ 0.553266] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.553462] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.555248] TCP bind hash table entries: 8192 (order: 6, 327680 bytes, linear)
[ 0.555788] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.556351] UDP hash table entries: 512 (order: 2, 24576 bytes, linear)
[ 0.556521] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes, linear)
[ 0.556820] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.557124] pci 0001:10:12.0: enabling device (0000 -> 0002)
[ 0.557209] pci 0001:10:12.1: enabling device (0000 -> 0002)
[ 0.557267] pci 0001:10:12.2: enabling device (0004 -> 0006)
[ 0.557346] Apple USB OHCI 0001:10:18.0 disabled by firmware
[ 0.557363] pci 0001:10:18.0: Can't enable PCI device, BIOS handoff failed.
[ 0.557384] Apple USB OHCI 0001:10:19.0 disabled by firmware
[ 0.557398] pci 0001:10:19.0: Can't enable PCI device, BIOS handoff failed.
[ 0.557424] pci 0001:10:1b.0: enabling device (0000 -> 0002)
[ 0.557473] pci 0001:10:1b.1: enabling device (0000 -> 0002)
[ 0.557522] pci 0001:10:1b.2: enabling device (0004 -> 0006)
[ 0.557584] pci 0002:20:0f.0: CLS mismatch (32 != 1020), using 32 bytes
[ 0.558027] Thermal assist unit not available
[ 0.559984] Initialise system trusted keyrings
[ 0.560363] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 0.582184] 9p: Installing v9fs 9p2000 file system support
[ 0.582867] NET: Registered PF_ALG protocol family
[ 0.582946] xor: measuring software checksum speed
[ 0.591529] 8regs : 1152 MB/sec
[ 0.601623] 8regs_prefetch : 975 MB/sec
[ 0.609724] 32regs : 1220 MB/sec
[ 0.618985] 32regs_prefetch : 1064 MB/sec
[ 0.621097] altivec : 4710 MB/sec
[ 0.621112] xor: using function: altivec (4710 MB/sec)
[ 0.621143] Key type asymmetric registered
[ 0.621157] Asymmetric key parser 'x509' registered
[ 0.627148] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[ 0.628383] bounce: pool size: 64 pages
[ 0.628779] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.629121] io scheduler bfq registered
[ 0.633393] Using unsupported 1920x1080 (null) at a0008000, depth=8, pitch=2048
[ 0.675215] Console: switching to colour frame buffer device 240x67
[ 0.715438] fb0: Open Firmware frame buffer device on /pci@f0000000/ATY,AlteracParent@10/ATY,Alterac_A@0
[ 0.716294] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.718087] serial 0001:10:15.0: enabling device (0004 -> 0007)
[ 0.718731] 0001:10:15.0: ttyS0 at I/O 0x410 (irq = 58, base_baud = 115200) is a 16550A
[ 0.719354] serial 0001:10:15.1: enabling device (0004 -> 0007)
[ 0.719910] 0001:10:15.1: ttyS1 at I/O 0x400 (irq = 58, base_baud = 115200) is a 16550A
[ 0.721941] MacIO PCI driver attached to Keylargo chipset
[ 0.728532] sata_sil 0001:10:13.0: version 2.4
[ 0.728826] sata_sil 0001:10:13.0: enabling device (0004 -> 0007)
[ 0.730826] scsi host0: sata_sil
[ 0.732191] scsi host1: sata_sil
[ 0.732690] ata1: SATA max UDMA/100 mmio m512@0x80082000 tf 0x80082080 irq 53
[ 0.732914] ata2: SATA max UDMA/100 mmio m512@0x80082000 tf 0x800820c0 irq 53
[ 0.733606] pata-pci-macio 0002:20:0d.0: enabling device (0004 -> 0006)
[ 0.747643] pata-pci-macio 0002:20:0d.0: Activating pata-macio chipset UniNorth ATA-6, Apple bus ID 3
[ 0.749371] scsi host2: pata_macio
[ 0.749858] ata3: PATA max UDMA/100 irq 39
[ 1.047304] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1.050277] ata1.00: ATA-9: SanDisk SSD PLUS 240GB, UF4500RL, max UDMA/133
[ 1.050498] ata1.00: 468877312 sectors, multi 1: LBA48 NCQ (depth 0/32)
[ 1.052000] ata1.00: Features: Dev-Sleep
[ 1.077716] ata1.00: configured for UDMA/100
[ 1.078827] scsi 0:0:0:0: Direct-Access ATA SanDisk SSD PLUS 00RL PQ: 0 ANSI: 5
[ 1.081681] sd 0:0:0:0: [sda] 468877312 512-byte logical blocks: (240 GB/224 GiB)
[ 1.081991] sd 0:0:0:0: [sda] Write Protect is off
[ 1.082151] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.082567] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.082960] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 1.086302] sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[ 1.088610] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.504296] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1.506854] ata2.00: ATA-9: WDC WD5000LPLX-60ZNTT1, 02.01A02, max UDMA/133
[ 1.507071] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 1.509749] ata2.00: configured for UDMA/100
[ 1.510552] scsi 1:0:0:0: Direct-Access ATA WDC WD5000LPLX-6 1A02 PQ: 0 ANSI: 5
[ 1.513066] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.513315] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1.513534] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.513692] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.513923] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.514333] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
[ 1.790961] pata-macio 0.0001f000:ata-4: Activating pata-macio chipset KeyLargo ATA-4, Apple bus ID 2
[ 1.802008] scsi host3: pata_macio
[ 1.811589] ata4: PATA max UDMA/66 irq 19
[ 1.976896] ata4.00: CFA: DeLOCK 54143 512MB, 100511E, max UDMA/66
[ 1.986286] ata4.00: 1009008 sectors, multi 1: LBA
[ 2.219342] sdb: [mac] sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8
[ 2.230789] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.240725] scsi 3:0:0:0: Direct-Access ATA DeLOCK 54143 512 11E PQ: 0 ANSI: 5
[ 2.251898] sd 3:0:0:0: [sdc] 1009008 512-byte logical blocks: (517 MB/493 MiB)
[ 2.261473] sd 3:0:0:0: [sdc] Write Protect is off
[ 2.270741] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.280117] sd 3:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.289742] sd 3:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
[ 2.301947] sdc: [mac] sdc1 sdc2 sdc3 sdc4 sdc5 sdc6
[ 2.313296] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 2.857628] pata-macio 0.00020000:ata-3: Activating pata-macio chipset KeyLargo ATA-3, Apple bus ID 0
[ 2.869051] scsi host4: pata_macio
[ 2.879321] ata5: PATA max MWDMA2 irq 20
[ 2.889459] sungem.c:v1.0 David S. Miller <davem@redhat.com>
[ 2.900576] gem 0002:20:0f.0 eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0a:95:9c:76:3a
[ 2.911408] ehci-pci 0001:10:12.2: EHCI Host Controller
[ 2.921326] ehci-pci 0001:10:12.2: new USB bus registered, assigned bus number 1
[ 2.931498] ehci-pci 0001:10:12.2: irq 52, io mem 0x80081000
[ 2.954295] ehci-pci 0001:10:12.2: USB 2.0 started, EHCI 1.00
[ 2.964341] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 2.974185] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.983903] usb usb1: Product: EHCI Host Controller
[ 2.993465] usb usb1: Manufacturer: Linux 6.1.92-PMacG4 ehci_hcd
[ 3.003036] usb usb1: SerialNumber: 0001:10:12.2
[ 3.013515] hub 1-0:1.0: USB hub found
[ 3.023047] hub 1-0:1.0: 5 ports detected
[ 3.033708] ehci-pci 0001:10:1b.2: EHCI Host Controller
[ 3.042998] ehci-pci 0001:10:1b.2: new USB bus registered, assigned bus number 2
[ 3.052505] ehci-pci 0001:10:1b.2: irq 63, io mem 0x80080000
[ 3.056808] ata5.00: ATAPI: _NEC DVD_RW ND-3520A, 1.04, max UDMA/33
[ 3.074294] ehci-pci 0001:10:1b.2: USB 2.0 started, EHCI 1.00
[ 3.084196] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 3.093737] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.094397] scsi 4:0:0:0: CD-ROM _NEC DVD_RW ND-3520A 1.04 PQ: 0 ANSI: 5
[ 3.103338] usb usb2: Product: EHCI Host Controller
[ 3.122885] usb usb2: Manufacturer: Linux 6.1.92-PMacG4 ehci_hcd
[ 3.132413] usb usb2: SerialNumber: 0001:10:1b.2
[ 3.142835] hub 2-0:1.0: USB hub found
[ 3.152405] hub 2-0:1.0: 5 ports detected
[ 3.163730] rtc-generic rtc-generic: registered as rtc0
[ 3.173846] PowerMac i2c bus pmu 2 registered
[ 3.183508] PowerMac i2c bus pmu 1 registered
[ 3.193696] PowerMac i2c bus mac-io 0 registered
[ 3.203095] i2c i2c-2: No i2c address for /pci@f2000000/mac-io@17/i2c@18000/i2c-modem
[ 3.212743] PowerMac i2c bus uni-n 1 registered
[ 3.213314] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 3.222048] i2c i2c-3: i2c-powermac: modalias failure on /uni-n@f8000000/i2c@f8001000/cereal@1c0
[ 3.231690] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.241898] PowerMac i2c bus uni-n 0 registered
[ 3.261683] hid: raw HID events driver (C) Jiri Kosina
[ 3.271643] usbcore: registered new interface driver usbhid
[ 3.281173] usbhid: USB HID core driver
[ 3.292000] NET: Registered PF_INET6 protocol family
[ 3.301454] usb 1-5: new high-speed USB device number 2 using ehci-pci
[ 3.313572] Segment Routing with IPv6
[ 3.323184] In-situ OAM (IOAM) with IPv6
[ 3.333085] 9pnet: Installing 9P2000 support
[ 3.334141] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 3.342670] drmem: No dynamic reconfiguration memory found
[ 3.361648] registered taskstats version 1
[ 3.371006] Loading compiled-in X.509 certificates
[ 3.386294] zswap: loaded using pool lzo/zsmalloc
[ 3.396191] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers
[ 3.405693] page_owner is disabled
[ 3.432586] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[ 3.466875] usb 1-5: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98
[ 3.476395] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.485838] usb 1-5: Product: USB2.0 Hub
[ 3.496245] hub 1-5:1.0: USB hub found
[ 3.509232] hub 1-5:1.0: 4 ports detected
[ 3.801069] usb 1-5.1: new low-speed USB device number 3 using ehci-pci
[ 3.936868] usb 1-5.1: New USB device found, idVendor=04d9, idProduct=0006, bcdDevice= 1.40
[ 3.946288] usb 1-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.955632] usb 1-5.1: Product: RPI Wired Keyboard 5
[ 3.964881] usb 1-5.1: Manufacturer:
[ 3.988850] input: RPI Wired Keyboard 5 as /devices/pci0001:10/0001:10:12.2/usb1/1-5/1-5.1/1-5.1:1.0/0003:04D9:0006.0001/input/input0
[ 4.055441] hid-generic 0003:04D9:0006.0001: input,hidraw0: USB HID v1.11 Keyboard [ RPI Wired Keyboard 5] on usb-0001:10:12.2-5.1/input0
[ 4.078896] input: RPI Wired Keyboard 5 as /devices/pci0001:10/0001:10:12.2/usb1/1-5/1-5.1/1-5.1:1.1/0003:04D9:0006.0002/input/input1
[ 4.148119] hid-generic 0003:04D9:0006.0002: input,hidraw1: USB HID v1.11 Device [ RPI Wired Keyboard 5] on usb-0001:10:12.2-5.1/input1
[ 4.214081] input: PMU as /devices/virtual/input/input2
[ 4.224469] netpoll: netconsole: local port 6666
[ 4.234415] netpoll: netconsole: local IPv4 address 192.168.2.8
[ 4.244247] netpoll: netconsole: interface 'eth0'
[ 4.254001] netpoll: netconsole: remote port 6666
[ 4.263694] netpoll: netconsole: remote IPv4 address 192.168.2.3
[ 4.273424] netpoll: netconsole: remote ethernet address a8:a1:59:16:4f:ea
[ 4.283092] usb 1-5.3: new low-speed USB device number 4 using ehci-pci
[ 4.284285] netpoll: netconsole: device eth0 not up yet, forcing it
[ 4.378014] sungem_phy: PHY ID: 2060e1, addr: 0
[ 4.387972] gem 0002:20:0f.0 eth0: Found BCM5421 PHY
[ 4.401627] usb 1-5.3: New USB device found, idVendor=275d, idProduct=0ba6, bcdDevice= 1.00
[ 4.411691] usb 1-5.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.421630] usb 1-5.3: Product: USB OPTICAL MOUSE
[ 4.436395] input: USB OPTICAL MOUSE as /devices/pci0001:10/0001:10:12.2/usb1/1-5/1-5.3/1-5.3:1.0/0003:275D:0BA6.0003/input/input3
[ 4.447304] hid-generic 0003:275D:0BA6.0003: input,hidraw2: USB HID v1.11 Mouse [USB OPTICAL MOUSE ] on usb-0001:10:12.2-5.3/input0
[ 8.057950] gem 0002:20:0f.0 eth0: Link is up at 1000 Mbps, full-duplex
[ 8.068671] gem 0002:20:0f.0 eth0: Pause is enabled (rxfifo: 10240 off: 7168 on: 5632)
[ 8.079157] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 8.099875] printk: console [netcon0] enabled
[ 8.110428] netconsole: network logging started
[ 8.138158] EXT4-fs (sda5): mounted filesystem with ordered data mode. Quota mode: disabled.
[ 8.148782] VFS: Mounted root (ext4 filesystem) readonly on device 8:5.
[ 8.162827] devtmpfs: mounted
[ 8.175739] Freeing unused kernel image (initmem) memory: 1076K
[ 8.192152] Checked W+X mappings: passed, no W+X pages found
[ 8.202795] rodata_test: all tests were successful
[ 8.213386] Run /sbin/init as init process
[ 8.223900] with arguments:
[ 8.234447] /sbin/init
[ 8.244974] with environment:
[ 8.255389] HOME=/
[ 8.265633] TERM=linux
[ 12.650317] ohci-pci 0001:10:12.0: OHCI PCI host controller
[ 12.664515] ohci-pci 0001:10:12.0: new USB bus registered, assigned bus number 3
[ 12.715045] ohci-pci 0001:10:12.0: irq 52, io mem 0x8008c000
[ 12.921829] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01
[ 12.931281] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.940552] usb usb3: Product: OHCI PCI host controller
[ 12.949768] usb usb3: Manufacturer: Linux 6.1.92-PMacG4 ohci_hcd
[ 12.959052] usb usb3: SerialNumber: 0001:10:12.0
[ 13.187765] [drm] radeon kernel modesetting enabled.
[ 13.188523] hub 3-0:1.0: USB hub found
[ 13.205931] Console: switching to colour dummy device 80x25
[ 13.207941] radeon 0000:00:10.0: enabling device (0006 -> 0007)
[ 13.210862] [drm] initializing kernel modesetting (RV350 0x1002:0x4150 0x1002:0x0002 0x00).
[ 13.211012] [drm] Forcing AGP to PCI mode
[ 13.211212] radeon 0000:00:10.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0x0000
[ 13.269712] [drm] Generation 2 PCI interface, using max accessible memory
[ 13.269818] radeon 0000:00:10.0: VRAM: 256M 0x00000000A0000000 - 0x00000000AFFFFFFF (256M used)
[ 13.269857] radeon 0000:00:10.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
[ 13.269970] [drm] Detected VRAM RAM=256M, BAR=256M
[ 13.269998] [drm] RAM width 128bits DDR
[ 13.270340] [drm] radeon: 256M of VRAM memory ready
[ 13.270382] [drm] radeon: 512M of GTT memory ready.
[ 13.270564] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 13.316246] [drm] radeon: 1 quad pipes, 1 Z pipes initialized
[ 13.316399] [drm] PCI GART of 512M enabled (table at 0x0000000003680000).
[ 13.316566] radeon 0000:00:10.0: WB enabled
[ 13.316609] radeon 0000:00:10.0: fence driver on ring 0 use gpu addr 0x0000000080000000
[ 13.351388] [drm] radeon: irq initialized.
[ 13.357688] [drm] Loading R300 Microcode
[ 13.363364] hub 3-0:1.0: 3 ports detected
[ 13.372308] ohci-pci 0001:10:12.1: OHCI PCI host controller
[ 13.372432] ohci-pci 0001:10:12.1: new USB bus registered, assigned bus number 4
[ 13.372668] ohci-pci 0001:10:12.1: irq 52, io mem 0x8008b000
[ 13.375744] BTRFS: device label g4_musl devid 1 transid 125838 /dev/sda4 scanned by (udev-worker) (537)
[ 13.497809] [drm] radeon: ring at 0x0000000080001000
[ 13.497932] [drm] ring test succeeded in 1 usecs
[ 13.538272] [drm] ib test succeeded in 0 usecs
[ 13.538430] Stack Depot allocating hash table of 65536 entries with kvcalloc
[ 13.548798] BTRFS: device label tmp devid 1 transid 4871 /dev/sda6 scanned by (udev-worker) (527)
[ 13.548988] [drm] Radeon Display Connectors
[ 13.549067] [drm] Connector 0:
[ 13.549107] [drm] DVI-I-1
[ 13.549141] [drm] HPD2
[ 13.549173] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 13.549213] [drm] Encoders:
[ 13.549245] [drm] CRT1: INTERNAL_DAC1
[ 13.549279] [drm] DFP2: INTERNAL_DVO1
[ 13.549312] [drm] Connector 1:
[ 13.549344] [drm] DVI-I-2
[ 13.549370] [drm] HPD1
[ 13.549395] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 13.549426] [drm] Encoders:
[ 13.549459] [drm] CRT2: INTERNAL_DAC2
[ 13.549492] [drm] DFP1: INTERNAL_TMDS1
[ 13.578102] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01
[ 13.578188] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.578258] usb usb4: Product: OHCI PCI host controller
[ 13.578298] usb usb4: Manufacturer: Linux 6.1.92-PMacG4 ohci_hcd
[ 13.578337] usb usb4: SerialNumber: 0001:10:12.1
[ 13.584966] hub 4-0:1.0: USB hub found
[ 13.590173] hub 4-0:1.0: 2 ports detected
[ 13.609356] Apple USB OHCI 0001:10:18.0 disabled by firmware
[ 13.609469] Apple USB OHCI 0001:10:19.0 disabled by firmware
[ 13.609624] ohci-pci 0001:10:1b.0: OHCI PCI host controller
[ 13.609717] ohci-pci 0001:10:1b.0: new USB bus registered, assigned bus number 5
[ 13.609912] ohci-pci 0001:10:1b.0: irq 63, io mem 0x80084000
[ 13.740108] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01
[ 13.740199] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.740269] usb usb5: Product: OHCI PCI host controller
[ 13.740310] usb usb5: Manufacturer: Linux 6.1.92-PMacG4 ohci_hcd
[ 13.740350] usb usb5: SerialNumber: 0001:10:1b.0
[ 13.742793] hub 5-0:1.0: USB hub found
[ 13.742948] hub 5-0:1.0: 3 ports detected
[ 13.745336] ohci-pci 0001:10:1b.1: OHCI PCI host controller
[ 13.745470] ohci-pci 0001:10:1b.1: new USB bus registered, assigned bus number 6
[ 13.745662] ohci-pci 0001:10:1b.1: irq 63, io mem 0x80083000
[ 13.874642] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01
[ 13.874745] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.874807] usb usb6: Product: OHCI PCI host controller
[ 13.874850] usb usb6: Manufacturer: Linux 6.1.92-PMacG4 ohci_hcd
[ 13.874889] usb usb6: SerialNumber: 0001:10:1b.1
[ 13.875984] hub 6-0:1.0: USB hub found
[ 13.876089] hub 6-0:1.0: 2 ports detected
[ 13.977633] [drm] fb mappable at 0xA0040000
[ 13.977729] [drm] vram apper at 0xA0000000
[ 13.977792] [drm] size 8294400
[ 13.977827] [drm] fb depth is 24
[ 13.977861] [drm] pitch is 7680
[ 14.402680] ADM1030 fan controller [@2c]
[ 14.407136] DS1775 digital thermometer [@49]
[ 14.407148] Temp: 56.2 C
[ 14.407154] Hyst: 70.0 C
[ 14.407158] OS: 75.0 C
[ 14.407162]
[ 14.562902] Console: switching to colour frame buffer device 240x67
[ 14.672068] radeon 0000:00:10.0: [drm] fb0: radeondrmfb frame buffer device
[ 14.672183] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:10.0 on minor 0
[ 15.439437] EXT4-fs (sda5): re-mounted. Quota mode: disabled.
[ 15.504933] EXT4-fs (sda5): re-mounted. Quota mode: disabled.
[ 16.049168] Adding 8388604k swap on /dev/sdb6. Priority:-2 extents:1 across:8388604k FS
[ 16.264033] random: crng init done
[ 16.264423] EXT4-fs (sdc5): mounting ext2 file system using the ext4 subsystem
[ 16.270129] EXT4-fs (sdc5): mounted filesystem without journal. Quota mode: disabled.
[ 16.270623] ext2 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
[ 16.281893] BTRFS info (device sda6): first mount of filesystem 65162d91-887e-4e48-a356-fbf7093eefb5
[ 16.282353] BTRFS info (device sda6): using xxhash64 (xxhash64-generic) checksum algorithm
[ 16.282735] BTRFS info (device sda6): use lzo compression, level 0
[ 16.283035] BTRFS info (device sda6): setting nodatasum
[ 16.283285] BTRFS info (device sda6): using free space tree
[ 16.299820] BTRFS info (device sda6): enabling ssd optimizations
[ 178.757853] BTRFS info (device sda6): last unmount of filesystem 65162d91-887e-4e48-a356-fbf7093eefb5
[ 178.801746] EXT4-fs (sdc5): unmounting filesystem.
[ 181.370308] elogind-daemon[1510]: Received signal 15 [TERM]
[ 181.846842] EXT4-fs (sda5): re-mounted. Quota mode: disabled.
[ 182.021346] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 182.021996] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 182.023084] reboot: Restarting system
[-- Attachment #4: dmesg_693_g4 --]
[-- Type: application/octet-stream, Size: 46350 bytes --]
[ 0.000000] Total memory = 2048MB; using 4096kB for hash table
[ 0.000000] Activating Kernel Userspace Access Protection
[ 0.000000] Activating Kernel Userspace Execution Prevention
[ 0.000000] Linux version 6.9.3-gentoo-PMacG4 (root@T1000) (gcc (Gentoo 13.2.1_p20240210 p14) 13.2.1 20240210, GNU ld (Gentoo 2.42 p3) 2.42.0) #3 SMP Sun Jun 2 17:17:26 CEST 2024
[ 0.000000] ioremap() called early from pmac_feature_init+0x254/0xa7c. Use early_ioremap() instead
[ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0x24
[ 0.000000] Mapped at 0xff3bf000
[ 0.000000] ioremap() called early from probe_one_macio+0x150/0x238. Use early_ioremap() instead
[ 0.000000] Found a Keylargo mac-io controller, rev: 3, mapped at 0x(ptrval)
[ 0.000000] PowerMac motherboard: PowerMac G4 Windtunnel
[ 0.000000] ioremap() called early from btext_map+0x5c/0x7c. Use early_ioremap() instead
[ 0.000000] Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
[ 0.000000] printk: legacy bootconsole [udbg0] enabled
[ 0.000000] CPU maps initialized for 1 thread per core
[ 0.000000] (thread shift is 0)
[ 0.000000] -----------------------------------------------------
[ 0.000000] phys_mem_size = 0x80000000
[ 0.000000] dcache_bsize = 0x20
[ 0.000000] icache_bsize = 0x20
[ 0.000000] cpu_features = 0x000000002514600a
[ 0.000000] possible = 0x00000000277de00a
[ 0.000000] always = 0x0000000001000000
[ 0.000000] cpu_user_features = 0x9c000001 0x00000000
[ 0.000000] mmu_features = 0x00010201
[ 0.000000] Hash_size = 0x400000
[ 0.000000] Hash_mask = 0xffff
[ 0.000000] -----------------------------------------------------
[ 0.000000] ioremap() called early from pmac_setup_arch+0xd0/0x228. Use early_ioremap() instead
[ 0.000000] ioremap() called early from find_via_pmu+0x220/0x288. Use early_ioremap() instead
[ 0.000000] ioremap() called early from find_via_pmu+0xd4/0x288. Use early_ioremap() instead
[ 0.000000] via-pmu: Server Mode is disabled
[ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c
[ 0.000000] ioremap() called early from pmac_nvram_init+0x284/0x518. Use early_ioremap() instead
[ 0.000000] nvram: Checking bank 0...
[ 0.000000] nvram: gen0=3427, gen1=3428
[ 0.000000] nvram: Active bank is: 1
[ 0.000000] nvram: OF partition at 0x410
[ 0.000000] nvram: XP partition at 0x1020
[ 0.000000] nvram: NR partition at 0x1120
[ 0.000000] Top of RAM: 0x80000000, Total RAM: 0x80000000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
[ 0.000000] Normal empty
[ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] percpu: Embedded 29 pages/cpu s28448 r8192 d82144 u118784
[ 0.000000] pcpu-alloc: s28448 r8192 d82144 u118784 alloc=29*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Kernel command line: ro root=/dev/sda5 slub_debug=FZP page_poison=1 netconsole=6666@192.168.2.8/eth0,6666@192.168.2.3/A8:A1:59:16:4F:EA debug
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560
[ 0.000000] mem auto-init: stack:all(pattern), heap alloc:off, heap free:off
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xffbbf000..0xfffff000 : fixmap
[ 0.000000] * 0xff400000..0xff800000 : highmem PTEs
[ 0.000000] * 0xff115000..0xff400000 : early ioremap
[ 0.000000] * 0xf1000000..0xff115000 : vmalloc & ioremap
[ 0.000000] * 0xb0000000..0xc0000000 : modules
[ 0.000000] Memory: 2058988K/2097152K available (7764K kernel code, 524K rwdata, 4524K rodata, 1100K init, 278K bss, 38164K reserved, 0K cma-reserved, 1310720K highmem)
[ 0.000000] **********************************************************
[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.000000] ** **
[ 0.000000] ** This system shows unhashed kernel memory addresses **
[ 0.000000] ** via the console, logs, and other interfaces. This **
[ 0.000000] ** might reduce the security of your system. **
[ 0.000000] ** **
[ 0.000000] ** If you see this message and you are not debugging **
[ 0.000000] ** the kernel, report this immediately to your system **
[ 0.000000] ** administrator! **
[ 0.000000] ** **
[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.000000] **********************************************************
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
[ 0.000000] mpic: Resetting
[ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 2 CPUs
[ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f
[ 0.000000] mpic: Initializing for 64 sources
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] time_init: decrementer frequency = 41.658765 MHz
[ 0.000000] time_init: processor frequency = 1416.666661 MHz
[ 0.000005] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x99b97f1da, max_idle_ns: 440795202966 ns
[ 0.000555] clocksource: timebase mult[18012a56] shift[24] registered
[ 0.001051] clockevent: decrementer mult[aaa2619] shift[32] cpu[0]
[ 0.002254] Console: colour dummy device 80x25
[ 0.002718] printk: legacy console [tty0] enabled
[ 0.003178] printk: legacy bootconsole [udbg0] disabled
[ 0.003682] pid_max: default: 32768 minimum: 301
[ 0.006463] LSM: initializing lsm=capability,yama
[ 0.006541] Yama: becoming mindful.
[ 0.007498] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.007551] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.014096] PowerMac SMP probe found 2 cpus
[ 0.014645] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
[ 0.014697] channel 0 bus <multibus>
[ 0.014718] channel 1 bus <multibus>
[ 0.014826] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
[ 0.014868] channel 0 bus <multibus>
[ 0.014929] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c
[ 0.015114] channel 1 bus <multibus>
[ 0.015132] channel 2 bus <multibus>
[ 0.015216] pmf: no parser for command 17 !
[ 0.015289] Processor timebase sync using GPIO 0x73
[ 0.015303] mpic: requesting IPIs...
[ 0.015404] CPU0: L2CR is 80000000
[ 0.015418] CPU0: L3CR is 9c030000
[ 0.017025] MPC7450 family performance monitor hardware support registered
[ 0.017280] rcu: Hierarchical SRCU implementation.
[ 0.017305] rcu: Max phase no-delay instances is 1000.
[ 0.018269] smp: Bringing up secondary CPUs ...
[83973666.477751] CPU1: L2CR was 0
[83973666.477809] CPU1: L2CR set to 80000000
[83973666.477816] CPU1: L3CR was 0
[83973666.477962] CPU1: L3CR set to 9c030000
[ 0.021530] smp: Brought up 1 node, 2 CPUs
[ 0.024502] devtmpfs: initialized
[ 0.025466] Duplicate name in PowerPC,G4@0, renamed to "l2-cache#1"
[ 0.025604] Duplicate name in l2-cache#1, renamed to "l2-cache#1"
[ 0.026064] Duplicate name in PowerPC,G4@1, renamed to "l2-cache#1"
[ 0.026226] Duplicate name in l2-cache#1, renamed to "l2-cache#1"
[ 0.032085] Duplicate name in gpio@50, renamed to "gpio5@6f#1"
[ 0.032193] Duplicate name in gpio@50, renamed to "gpio6@70#1"
[ 0.032418] Duplicate name in gpio@50, renamed to "gpio11@75#1"
[ 0.032550] Duplicate name in gpio@50, renamed to "extint-gpio15@67#1"
[ 0.040173] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0
[ 0.040221] PCI host bridge /pci@f0000000 ranges:
[ 0.040260] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000
[ 0.040290] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
[ 0.040426] MEM 0x0000000090000000..0x00000000afffffff -> 0x0000000090000000
[ 0.040486] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0
[ 0.040510] PCI host bridge /pci@f2000000 (primary) ranges:
[ 0.040541] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000
[ 0.040570] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000
[ 0.040690] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000
[ 0.040752] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0
[ 0.040775] PCI host bridge /pci@f4000000 ranges:
[ 0.040805] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000
[ 0.040830] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000
[ 0.041039] Found NEC PD720100A USB2 chip with disabled EHCI, fixing up...
[ 0.041597] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.041694] futex hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.045230] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.051833] PCI: Probing PCI hardware
[ 0.052688] PCI host bridge to bus 0000:00
[ 0.052723] pci_bus 0000:00: root bus resource [io 0xff780000-0xfff7ffff] (bus address [0x0000-0x7fffff])
[ 0.052754] pci_bus 0000:00: root bus resource [mem 0xf1000000-0xf1ffffff]
[ 0.052775] pci_bus 0000:00: root bus resource [mem 0x90000000-0xafffffff]
[ 0.052833] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.052855] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.053503] pci 0000:00:0b.0: [106b:0034] type 00 class 0x060000 conventional PCI endpoint
[ 0.054106] pci 0000:00:10.0: [1002:4150] type 00 class 0x030000 conventional PCI endpoint
[ 0.054152] pci 0000:00:10.0: BAR 0 [mem 0xa0000000-0xafffffff pref]
[ 0.054177] pci 0000:00:10.0: BAR 1 [io 0xff780400-0xff7804ff]
[ 0.054201] pci 0000:00:10.0: BAR 2 [mem 0x90000000-0x9000ffff]
[ 0.054242] pci 0000:00:10.0: ROM [mem 0x90020000-0x9003ffff pref]
[ 0.054298] pci 0000:00:10.0: supports D1 D2
[ 0.055169] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.055874] OF: /pci@f2000000/mac-io@17/gpio@50/gpio5@6f: could not find phandle 1751474532
[ 0.055948] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio15@67: could not find phandle 1751474532
[ 0.056025] OF: /pci@f2000000/mac-io@17/gpio@50/gpio6@70: could not find phandle 1634562093
[ 0.056095] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio16@68: could not find phandle 1936745825
[ 0.056174] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio14@66: could not find phandle 1818848869
[ 0.056250] OF: /pci@f2000000/mac-io@17/gpio@50/gpio12@76: could not find phandle 1835103092
[ 0.056316] OF: /pci@f2000000/mac-io@17/gpio@50/gpio11@75: could not find phandle 1635083369
[ 0.056378] OF: /pci@f2000000/mac-io@17/gpio@50/gpio5@6f: could not find phandle 1751474532
[ 0.056440] OF: /pci@f2000000/mac-io@17/gpio@50/gpio6@70: could not find phandle 1634562093
[ 0.056502] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio4@5c: could not find phandle 1818848869
[ 0.056578] OF: /pci@f2000000/mac-io@17/gpio@50/gpio11@75: could not find phandle 1635083369
[ 0.056641] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio15@67: could not find phandle 1751474532
[ 0.057955] pci_bus 0001:00: Fixed dependency cycle(s) with /pci@f2000000/mac-io@17/interrupt-controller@40000
[ 0.058072] PCI host bridge to bus 0001:00
[ 0.058091] pci_bus 0001:00: root bus resource [io 0x0000-0x7fffff]
[ 0.058140] pci_bus 0001:00: root bus resource [mem 0xf3000000-0xf3ffffff]
[ 0.058164] pci_bus 0001:00: root bus resource [mem 0x80000000-0x8fffffff]
[ 0.058188] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.058208] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.058682] pci 0001:00:0b.0: [106b:0035] type 00 class 0x060000 conventional PCI endpoint
[ 0.059273] pci 0001:00:12.0: [1033:0035] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.059317] pci 0001:00:12.0: BAR 0 [mem 0x8008c000-0x8008cfff]
[ 0.059396] pci 0001:00:12.0: supports D1 D2
[ 0.059412] pci 0001:00:12.0: PME# supported from D0 D1 D2 D3hot
[ 0.059788] pci 0001:00:12.1: [1033:0035] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.059828] pci 0001:00:12.1: BAR 0 [mem 0x8008b000-0x8008bfff]
[ 0.059905] pci 0001:00:12.1: supports D1 D2
[ 0.059921] pci 0001:00:12.1: PME# supported from D0 D1 D2 D3hot
[ 0.060369] pci 0001:00:12.2: [1033:00e0] type 00 class 0x0c0320 conventional PCI endpoint
[ 0.060410] pci 0001:00:12.2: BAR 0 [mem 0x80081000-0x800810ff]
[ 0.060488] pci 0001:00:12.2: supports D1 D2
[ 0.060504] pci 0001:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.060831] pci 0001:00:13.0: [1095:3112] type 00 class 0x018000 conventional PCI endpoint
[ 0.060871] pci 0001:00:13.0: BAR 0 [io 0x0460-0x0467]
[ 0.060894] pci 0001:00:13.0: BAR 1 [io 0x0450-0x0453]
[ 0.060916] pci 0001:00:13.0: BAR 2 [io 0x0440-0x0447]
[ 0.060939] pci 0001:00:13.0: BAR 3 [io 0x0430-0x0433]
[ 0.060961] pci 0001:00:13.0: BAR 4 [io 0x0420-0x042f]
[ 0.060983] pci 0001:00:13.0: BAR 5 [mem 0x80082000-0x800821ff]
[ 0.061006] pci 0001:00:13.0: ROM [mem 0x80100000-0x8017ffff pref]
[ 0.061055] pci 0001:00:13.0: supports D1 D2
[ 0.061504] pci 0001:00:15.0: [9710:9865] type 00 class 0x070002 conventional PCI endpoint
[ 0.061547] pci 0001:00:15.0: BAR 0 [io 0x0410-0x0417]
[ 0.061571] pci 0001:00:15.0: BAR 1 [mem 0x8008a000-0x8008afff]
[ 0.061604] pci 0001:00:15.0: BAR 4 [mem 0x80089000-0x80089fff]
[ 0.061666] pci 0001:00:15.0: supports D1 D2
[ 0.061682] pci 0001:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.062023] pci 0001:00:15.1: [9710:9865] type 00 class 0x070002 conventional PCI endpoint
[ 0.062064] pci 0001:00:15.1: BAR 0 [io 0x0400-0x0407]
[ 0.062087] pci 0001:00:15.1: BAR 1 [mem 0x80088000-0x80088fff]
[ 0.062120] pci 0001:00:15.1: BAR 4 [mem 0x80087000-0x80087fff]
[ 0.062181] pci 0001:00:15.1: supports D1 D2
[ 0.062197] pci 0001:00:15.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.062522] pci 0001:00:15.2: [ffff:9865] type 00 class 0x070103 conventional PCI endpoint
[ 0.062562] pci 0001:00:15.2: BAR 0 [io 0x0000-0x0007]
[ 0.062585] pci 0001:00:15.2: BAR 1 [io 0x0000-0x0007]
[ 0.062607] pci 0001:00:15.2: BAR 2 [mem 0x00000000-0x00000fff]
[ 0.062635] pci 0001:00:15.2: BAR 4 [mem 0x00000000-0x00000fff]
[ 0.062694] pci 0001:00:15.2: supports D1 D2
[ 0.062710] pci 0001:00:15.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.063144] pci 0001:00:16.0: [14e4:4320] type 00 class 0x028000 conventional PCI endpoint
[ 0.063185] pci 0001:00:16.0: BAR 0 [mem 0x8008e000-0x8008ffff]
[ 0.063261] pci 0001:00:16.0: supports D1 D2
[ 0.063277] pci 0001:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.063586] pci 0001:00:17.0: [106b:0022] type 00 class 0xff0000 conventional PCI endpoint
[ 0.063626] pci 0001:00:17.0: BAR 0 [mem 0x80000000-0x8007ffff]
[ 0.064095] pci 0001:00:18.0: [106b:0019] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.064135] pci 0001:00:18.0: BAR 0 [mem 0x80086000-0x80086fff]
[ 0.064460] pci 0001:00:19.0: [106b:0019] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.064499] pci 0001:00:19.0: BAR 0 [mem 0x80085000-0x80085fff]
[ 0.064942] pci 0001:00:1b.0: [1033:0035] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.064987] pci 0001:00:1b.0: BAR 0 [mem 0x80084000-0x80084fff]
[ 0.065066] pci 0001:00:1b.0: supports D1 D2
[ 0.065082] pci 0001:00:1b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.065555] pci 0001:00:1b.1: [1033:0035] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.065598] pci 0001:00:1b.1: BAR 0 [mem 0x80083000-0x80083fff]
[ 0.065676] pci 0001:00:1b.1: supports D1 D2
[ 0.065693] pci 0001:00:1b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.066024] pci 0001:00:1b.2: [1033:00e0] type 00 class 0x0c0320 conventional PCI endpoint
[ 0.066064] pci 0001:00:1b.2: BAR 0 [mem 0x80080000-0x800800ff]
[ 0.066140] pci 0001:00:1b.2: supports D1 D2
[ 0.066157] pci 0001:00:1b.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.066594] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.068024] PCI host bridge to bus 0002:00
[ 0.068055] pci_bus 0002:00: root bus resource [io 0x880000-0x107ffff] (bus address [0x0000-0x7fffff])
[ 0.068083] pci_bus 0002:00: root bus resource [mem 0xf5000000-0xf5ffffff]
[ 0.068106] pci_bus 0002:00: root bus resource [bus 00-ff]
[ 0.068125] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.068644] pci 0002:00:0b.0: [106b:0036] type 00 class 0x060000 conventional PCI endpoint
[ 0.069049] pci 0002:00:0d.0: [106b:0033] type 00 class 0xff0000 conventional PCI endpoint
[ 0.069089] pci 0002:00:0d.0: BAR 0 [mem 0xf5004000-0xf5007fff]
[ 0.069465] pci 0002:00:0e.0: [106b:0031] type 00 class 0x0c0010 conventional PCI endpoint
[ 0.069504] pci 0002:00:0e.0: BAR 0 [mem 0xf5000000-0xf5000fff]
[ 0.069573] pci 0002:00:0e.0: supports D1 D2
[ 0.069589] pci 0002:00:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.070025] pci 0002:00:0f.0: [106b:0032] type 00 class 0x020000 conventional PCI endpoint
[ 0.070067] pci 0002:00:0f.0: BAR 0 [mem 0xf5200000-0xf53fffff]
[ 0.070117] pci 0002:00:0f.0: ROM [mem 0xf5100000-0xf51fffff pref]
[ 0.070985] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.071549] PCI 0000:00 Cannot reserve Legacy IO [io 0xff780000-0xff780fff]
[ 0.071610] PCI 0001:00 Cannot reserve Legacy IO [io 0x0000-0x0fff]
[ 0.071643] pci_bus 0000:00: resource 4 [io 0xff780000-0xfff7ffff]
[ 0.071663] pci_bus 0000:00: resource 5 [mem 0xf1000000-0xf1ffffff]
[ 0.071682] pci_bus 0000:00: resource 6 [mem 0x90000000-0xafffffff]
[ 0.071723] pci 0001:00:15.2: BAR 2 [mem 0xf3000000-0xf3000fff]: assigned
[ 0.071749] pci 0001:00:15.2: BAR 4 [mem 0xf3001000-0xf3001fff]: assigned
[ 0.071771] pci 0001:00:15.2: BAR 0 [io 0x1000-0x1007]: assigned
[ 0.071793] pci 0001:00:15.2: BAR 1 [io 0x1008-0x100f]: assigned
[ 0.071828] pci_bus 0001:00: resource 4 [io 0x0000-0x7fffff]
[ 0.071847] pci_bus 0001:00: resource 5 [mem 0xf3000000-0xf3ffffff]
[ 0.071866] pci_bus 0001:00: resource 6 [mem 0x80000000-0x8fffffff]
[ 0.071887] pci_bus 0002:00: resource 4 [io 0x880000-0x107ffff]
[ 0.071906] pci_bus 0002:00: resource 5 [mem 0xf5000000-0xf5ffffff]
[ 0.135068] raid6: altivecx8 gen() 3302 MB/s
[ 0.191825] raid6: altivecx4 gen() 3421 MB/s
[ 0.248589] raid6: altivecx2 gen() 3219 MB/s
[ 0.305353] raid6: altivecx1 gen() 2450 MB/s
[ 0.362159] raid6: int32x8 gen() 356 MB/s
[ 0.418865] raid6: int32x4 gen() 441 MB/s
[ 0.475619] raid6: int32x2 gen() 847 MB/s
[ 0.532393] raid6: int32x1 gen() 529 MB/s
[ 0.532409] raid6: using algorithm altivecx4 gen() 3421 MB/s
[ 0.532425] raid6: using intx1 recovery algorithm
[ 0.535052] SCSI subsystem initialized
[ 0.535515] libata version 3.00 loaded.
[ 0.535861] usbcore: registered new interface driver usbfs
[ 0.535999] usbcore: registered new interface driver hub
[ 0.536105] usbcore: registered new device driver usb
[ 0.539035] pci 0000:00:10.0: vgaarb: setting as boot VGA device
[ 0.539072] pci 0000:00:10.0: vgaarb: bridge control possible
[ 0.539090] pci 0000:00:10.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
[ 0.539167] vgaarb: loaded
[ 0.539511] clocksource: Switched to clocksource timebase
[ 0.561656] NET: Registered PF_INET protocol family
[ 0.562382] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.565679] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 10240 bytes, linear)
[ 0.566587] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.567252] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.568994] TCP bind hash table entries: 8192 (order: 6, 327680 bytes, linear)
[ 0.569569] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.570073] UDP hash table entries: 512 (order: 2, 24576 bytes, linear)
[ 0.570246] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes, linear)
[ 0.570997] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.571301] pci 0001:00:12.0: enabling device (0000 -> 0002)
[ 0.571391] pci 0001:00:12.1: enabling device (0000 -> 0002)
[ 0.571440] pci 0001:00:12.2: enabling device (0004 -> 0006)
[ 0.571518] Apple USB OHCI 0001:00:18.0 disabled by firmware
[ 0.571535] pci 0001:00:18.0: Can't enable PCI device, BIOS handoff failed.
[ 0.571560] Apple USB OHCI 0001:00:19.0 disabled by firmware
[ 0.571575] pci 0001:00:19.0: Can't enable PCI device, BIOS handoff failed.
[ 0.571604] pci 0001:00:1b.0: enabling device (0000 -> 0002)
[ 0.571651] pci 0001:00:1b.1: enabling device (0000 -> 0002)
[ 0.571697] pci 0001:00:1b.2: enabling device (0004 -> 0006)
[ 0.571757] pci 0002:00:0f.0: CLS mismatch (32 != 1020), using 32 bytes
[ 0.572932] Thermal assist unit not available
[ 0.575200] Initialise system trusted keyrings
[ 0.575508] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 0.586964] 9p: Installing v9fs 9p2000 file system support
[ 0.587636] NET: Registered PF_ALG protocol family
[ 0.587739] xor: measuring software checksum speed
[ 0.596322] 8regs : 1151 MB/sec
[ 0.606425] 8regs_prefetch : 975 MB/sec
[ 0.614525] 32regs : 1218 MB/sec
[ 0.623777] 32regs_prefetch : 1065 MB/sec
[ 0.625876] altivec : 4725 MB/sec
[ 0.625890] xor: using function: altivec (4725 MB/sec)
[ 0.625920] Key type asymmetric registered
[ 0.625935] Asymmetric key parser 'x509' registered
[ 0.632117] bounce: pool size: 64 pages
[ 0.632625] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.632945] io scheduler bfq registered
[ 0.638049] Using unsupported 1920x1080 (null) at a0008000, depth=8, pitch=2048
[ 0.679862] Console: switching to colour frame buffer device 240x67
[ 0.720223] fb0: Open Firmware frame buffer device on /pci@f0000000/ATY,AlteracParent@10/ATY,Alterac_A@0
[ 0.721218] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.724443] serial 0001:00:15.0: enabling device (0004 -> 0007)
[ 0.725946] 0001:00:15.0: ttyS0 at I/O 0x410 (irq = 58, base_baud = 115200) is a 16550A
[ 0.726834] serial 0001:00:15.1: enabling device (0004 -> 0007)
[ 0.728014] 0001:00:15.1: ttyS1 at I/O 0x400 (irq = 58, base_baud = 115200) is a 16550A
[ 0.730220] MacIO PCI driver attached to Keylargo chipset
[ 0.737162] sata_sil 0001:00:13.0: version 2.4
[ 0.737495] sata_sil 0001:00:13.0: enabling device (0004 -> 0007)
[ 0.740216] scsi host0: sata_sil
[ 0.741666] scsi host1: sata_sil
[ 0.742209] ata1: SATA max UDMA/100 mmio m512@0x80082000 tf 0x80082080 irq 53 lpm-pol 0
[ 0.742463] ata2: SATA max UDMA/100 mmio m512@0x80082000 tf 0x800820c0 irq 53 lpm-pol 0
[ 0.743088] pata-pci-macio 0002:00:0d.0: enabling device (0004 -> 0006)
[ 0.762854] pata-pci-macio 0002:00:0d.0: Activating pata-macio chipset UniNorth ATA-6, Apple bus ID 3
[ 0.764766] scsi host2: pata_macio
[ 0.765281] ata3: PATA max UDMA/100 irq 39 lpm-pol 0
[ 1.055886] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1.056830] ata1.00: ATA-9: SanDisk SSD PLUS 240GB, UF4500RL, max UDMA/133
[ 1.057054] ata1.00: 468877312 sectors, multi 1: LBA48 NCQ (depth 0/32)
[ 1.058616] ata1.00: Features: Dev-Sleep
[ 1.082967] ata1.00: configured for UDMA/100
[ 1.083931] scsi 0:0:0:0: Direct-Access ATA SanDisk SSD PLUS 00RL PQ: 0 ANSI: 5
[ 1.086930] sd 0:0:0:0: [sda] 468877312 512-byte logical blocks: (240 GB/224 GiB)
[ 1.087238] sd 0:0:0:0: [sda] Write Protect is off
[ 1.087400] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.087637] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.088055] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 1.091605] sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[ 1.094079] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.622867] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1.625441] ata2.00: ATA-9: WDC WD5000LPLX-60ZNTT1, 02.01A02, max UDMA/133
[ 1.625662] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 1.628362] ata2.00: configured for UDMA/100
[ 1.629052] scsi 1:0:0:0: Direct-Access ATA WDC WD5000LPLX-6 1A02 PQ: 0 ANSI: 5
[ 1.631490] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.631742] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1.631966] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.632128] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.632365] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.632785] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
[ 1.786192] pata-macio 0.0001f000:ata-4: Activating pata-macio chipset KeyLargo ATA-4, Apple bus ID 2
[ 1.797208] scsi host3: pata_macio
[ 1.806724] ata4: PATA max UDMA/66 irq 19 lpm-pol 0
[ 1.975457] ata4.00: CFA: DeLOCK 54143 512MB, 100511E, max UDMA/66
[ 1.984719] ata4.00: 1009008 sectors, multi 1: LBA
[ 2.305617] sdb: [mac] sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8
[ 2.317488] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.327477] scsi 3:0:0:0: Direct-Access ATA DeLOCK 54143 512 11E PQ: 0 ANSI: 5
[ 2.338990] sd 3:0:0:0: [sdc] 1009008 512-byte logical blocks: (517 MB/493 MiB)
[ 2.348477] sd 3:0:0:0: [sdc] Write Protect is off
[ 2.357772] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.367114] sd 3:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.376754] sd 3:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
[ 2.389155] sdc: [mac] sdc1 sdc2 sdc3 sdc4 sdc5 sdc6
[ 2.400534] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 2.852850] pata-macio 0.00020000:ata-3: Activating pata-macio chipset KeyLargo ATA-3, Apple bus ID 0
[ 2.864468] scsi host4: pata_macio
[ 2.874719] ata5: PATA max MWDMA2 irq 20 lpm-pol 0
[ 2.885002] sungem.c:v1.0 David S. Miller <davem@redhat.com>
[ 2.896518] gem 0002:00:0f.0 eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0a:95:9c:76:3a
[ 2.907360] ehci-pci 0001:00:12.2: EHCI Host Controller
[ 2.918219] ehci-pci 0001:00:12.2: new USB bus registered, assigned bus number 1
[ 2.918267] rtc-generic rtc-generic: registered as rtc0
[ 2.928716] ehci-pci 0001:00:12.2: irq 52, io mem 0x80081000
[ 2.938976] PowerMac i2c bus pmu 2 registered
[ 2.959103] PowerMac i2c bus pmu 1 registered
[ 2.969510] PowerMac i2c bus mac-io 0 registered
[ 2.969512] ehci-pci 0001:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.979385] i2c i2c-2: No i2c address for /pci@f2000000/mac-io@17/i2c@18000/i2c-modem
[ 2.989323] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09
[ 2.998688] PowerMac i2c bus uni-n 1 registered
[ 3.008131] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.017788] i2c i2c-3: i2c-powermac: modalias failure on /uni-n@f8000000/i2c@f8001000/cereal@1c0
[ 3.027456] usb usb1: Product: EHCI Host Controller
[ 3.037632] PowerMac i2c bus uni-n 0 registered
[ 3.047148] usb usb1: Manufacturer: Linux 6.9.3-gentoo-PMacG4 ehci_hcd
[ 3.047157] usb usb1: SerialNumber: 0001:00:12.2
[ 3.058083] hid: raw HID events driver (C) Jiri Kosina
[ 3.068373] hub 1-0:1.0: USB hub found
[ 3.077348] usbcore: registered new interface driver usbhid
[ 3.087332] ata5.00: ATAPI: _NEC DVD_RW ND-3520A, 1.04, max UDMA/33
[ 3.096919] usbhid: USB HID core driver
[ 3.098079] NET: Registered PF_INET6 protocol family
[ 3.107119] hub 1-0:1.0: 5 ports detected
[ 3.120078] Segment Routing with IPv6
[ 3.128544] ehci-pci 0001:00:1b.2: EHCI Host Controller
[ 3.137029] In-situ OAM (IOAM) with IPv6
[ 3.147099] ehci-pci 0001:00:1b.2: new USB bus registered, assigned bus number 2
[ 3.166312] 9pnet: Installing 9P2000 support
[ 3.176979] ehci-pci 0001:00:1b.2: irq 63, io mem 0x80080000
[ 3.186032] drmem: No dynamic reconfiguration memory found
[ 3.196067] scsi 4:0:0:0: CD-ROM _NEC DVD_RW ND-3520A 1.04 PQ: 0 ANSI: 5
[ 3.222893] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 3.225063] ehci-pci 0001:00:1b.2: USB 2.0 started, EHCI 1.00
[ 3.245493] registered taskstats version 1
[ 3.245751] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.09
[ 3.256285] Loading compiled-in X.509 certificates
[ 3.265666] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.285901] usb usb2: Product: EHCI Host Controller
[ 3.295903] usb usb2: Manufacturer: Linux 6.9.3-gentoo-PMacG4 ehci_hcd
[ 3.305899] usb usb2: SerialNumber: 0001:00:1b.2
[ 3.318331] hub 2-0:1.0: USB hub found
[ 3.328505] hub 2-0:1.0: 5 ports detected
[ 3.367554] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 3.377677] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.406334] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 3.409728] zswap: loaded using pool lzo/zsmalloc
[ 3.426871] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers
[ 3.437247] page_owner is disabled
[ 3.447164] usb 1-5: new high-speed USB device number 2 using ehci-pci
[ 3.470627] Btrfs loaded, zoned=no, fsverity=no
[ 3.608256] usb 1-5: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=32.98
[ 3.618558] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.628655] usb 1-5: Product: USB2.0 Hub
[ 3.639744] hub 1-5:1.0: USB hub found
[ 3.650077] hub 1-5:1.0: 4 ports detected
[ 3.946183] usb 1-5.1: new low-speed USB device number 3 using ehci-pci
[ 4.081968] usb 1-5.1: New USB device found, idVendor=04d9, idProduct=0006, bcdDevice= 1.40
[ 4.092019] usb 1-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.101991] usb 1-5.1: Product: RPI Wired Keyboard 5
[ 4.111900] usb 1-5.1: Manufacturer:
[ 4.136396] input: RPI Wired Keyboard 5 as /devices/pci0001:00/0001:00:12.2/usb1/1-5/1-5.1/1-5.1:1.0/0003:04D9:0006.0001/input/input0
[ 4.204170] hid-generic 0003:04D9:0006.0001: input,hidraw0: USB HID v1.11 Keyboard [ RPI Wired Keyboard 5] on usb-0001:00:12.2-5.1/input0
[ 4.228106] input: RPI Wired Keyboard 5 as /devices/pci0001:00/0001:00:12.2/usb1/1-5/1-5.1/1-5.1:1.1/0003:04D9:0006.0002/input/input1
[ 4.253754] input: PMU as /devices/virtual/input/input2
[ 4.293463] hid-generic 0003:04D9:0006.0002: input,hidraw1: USB HID v1.11 Device [ RPI Wired Keyboard 5] on usb-0001:00:12.2-5.1/input1
[ 4.296541] netpoll: netconsole: local port 6666
[ 4.315262] netpoll: netconsole: local IPv4 address 192.168.2.8
[ 4.325925] netpoll: netconsole: interface 'eth0'
[ 4.336453] netpoll: netconsole: remote port 6666
[ 4.346910] netpoll: netconsole: remote IPv4 address 192.168.2.3
[ 4.357349] netpoll: netconsole: remote ethernet address a8:a1:59:16:4f:ea
[ 4.367913] netpoll: netconsole: device eth0 not up yet, forcing it
[ 4.392857] usb 1-5.3: new low-speed USB device number 4 using ehci-pci
[ 4.456580] sungem_phy: PHY ID: 2060e1, addr: 0
[ 4.467501] gem 0002:00:0f.0 eth0: Found BCM5421 PHY
[ 4.503866] usb 1-5.3: New USB device found, idVendor=275d, idProduct=0ba6, bcdDevice= 1.00
[ 4.514594] usb 1-5.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.525072] usb 1-5.3: Product: USB OPTICAL MOUSE
[ 4.540710] input: USB OPTICAL MOUSE as /devices/pci0001:00/0001:00:12.2/usb1/1-5/1-5.3/1-5.3:1.0/0003:275D:0BA6.0003/input/input3
[ 4.552020] hid-generic 0003:275D:0BA6.0003: input,hidraw2: USB HID v1.11 Mouse [USB OPTICAL MOUSE ] on usb-0001:00:12.2-5.3/input0
[ 8.133193] gem 0002:00:0f.0 eth0: Link is up at 1000 Mbps, full-duplex
[ 8.144151] printk: legacy console [netcon0] enabled
[ 8.144278] gem 0002:00:0f.0 eth0: Pause is enabled (rxfifo: 10240 off: 7168 on: 5632)
[ 8.155112] netconsole: network logging started
[ 8.200857] EXT4-fs (sda5): mounted filesystem fa07e66f-b4f9-404f-85d8-487d3c097aec ro with ordered data mode. Quota mode: disabled.
[ 8.212523] VFS: Mounted root (ext4 filesystem) readonly on device 8:5.
[ 8.227640] devtmpfs: mounted
[ 8.241146] Freeing unused kernel image (initmem) memory: 1100K
[ 8.258273] Checked W+X mappings: passed, no W+X pages found
[ 8.269666] rodata_test: all tests were successful
[ 8.281023] Run /sbin/init as init process
[ 8.292291] with arguments:
[ 8.303482] /sbin/init
[ 8.314574] with environment:
[ 8.325563] HOME=/
[ 8.336451] TERM=linux
[ 12.640274] ohci-pci 0001:00:12.0: OHCI PCI host controller
[ 12.693802] ohci-pci 0001:00:12.0: new USB bus registered, assigned bus number 3
[ 12.735395] ohci-pci 0001:00:12.0: irq 52, io mem 0x8008c000
[ 12.967000] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09
[ 12.977036] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.986736] usb usb3: Product: OHCI PCI host controller
[ 12.996325] usb usb3: Manufacturer: Linux 6.9.3-gentoo-PMacG4 ohci_hcd
[ 13.005945] usb usb3: SerialNumber: 0001:00:12.0
[ 13.080391] hub 3-0:1.0: USB hub found
[ 13.093067] hub 3-0:1.0: 3 ports detected
[ 13.112557] ohci-pci 0001:00:12.1: OHCI PCI host controller
[ 13.122614] ohci-pci 0001:00:12.1: new USB bus registered, assigned bus number 4
[ 13.131351] [drm] radeon kernel modesetting enabled.
[ 13.153537] Console: switching to colour dummy device 80x25
[ 13.154949] ohci-pci 0001:00:12.1: irq 52, io mem 0x8008b000
[ 13.161668] radeon 0000:00:10.0: enabling device (0006 -> 0007)
[ 13.176699] [drm] initializing kernel modesetting (RV350 0x1002:0x4150 0x1002:0x0002 0x00).
[ 13.176885] [drm] Forcing AGP to PCI mode
[ 13.177018] radeon 0000:00:10.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0x0000
[ 13.265530] [drm] Generation 2 PCI interface, using max accessible memory
[ 13.265665] radeon 0000:00:10.0: VRAM: 256M 0x00000000A0000000 - 0x00000000AFFFFFFF (256M used)
[ 13.265706] radeon 0000:00:10.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
[ 13.265816] [drm] Detected VRAM RAM=256M, BAR=256M
[ 13.265847] [drm] RAM width 128bits DDR
[ 13.270619] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09
[ 13.270704] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.270752] usb usb4: Product: OHCI PCI host controller
[ 13.270781] usb usb4: Manufacturer: Linux 6.9.3-gentoo-PMacG4 ohci_hcd
[ 13.270810] usb usb4: SerialNumber: 0001:00:12.1
[ 13.270930] [drm] radeon: 256M of VRAM memory ready
[ 13.270966] [drm] radeon: 512M of GTT memory ready.
[ 13.271133] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 13.282724] [drm] radeon: 1 quad pipes, 1 Z pipes initialized
[ 13.282916] [drm] PCI GART of 512M enabled (table at 0x0000000003600000).
[ 13.283851] radeon 0000:00:10.0: WB enabled
[ 13.283910] radeon 0000:00:10.0: fence driver on ring 0 use gpu addr 0x0000000080000000
[ 13.284915] [drm] radeon: irq initialized.
[ 13.285010] [drm] Loading R300 Microcode
[ 13.285053] Loading firmware: radeon/R300_cp.bin
[ 13.307897] hub 4-0:1.0: USB hub found
[ 13.310001] hub 4-0:1.0: 2 ports detected
[ 13.319934] Apple USB OHCI 0001:00:18.0 disabled by firmware
[ 13.320082] Apple USB OHCI 0001:00:19.0 disabled by firmware
[ 13.320309] ohci-pci 0001:00:1b.0: OHCI PCI host controller
[ 13.320379] ohci-pci 0001:00:1b.0: new USB bus registered, assigned bus number 5
[ 13.320593] ohci-pci 0001:00:1b.0: irq 63, io mem 0x80084000
[ 13.334978] [drm] radeon: ring at 0x0000000080001000
[ 13.335086] [drm] ring test succeeded in 1 usecs
[ 13.339734] [drm] ib test succeeded in 0 usecs
[ 13.339830] stackdepot: allocating hash table of 65536 entries via kvcalloc
[ 13.357325] [drm] Radeon Display Connectors
[ 13.357402] [drm] Connector 0:
[ 13.357451] [drm] DVI-I-1
[ 13.357475] [drm] HPD2
[ 13.357499] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 13.357532] [drm] Encoders:
[ 13.357556] [drm] CRT1: INTERNAL_DAC1
[ 13.357594] [drm] DFP2: INTERNAL_DVO1
[ 13.357621] [drm] Connector 1:
[ 13.357647] [drm] DVI-I-2
[ 13.357673] [drm] HPD1
[ 13.357696] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 13.357728] [drm] Encoders:
[ 13.357761] [drm] CRT2: INTERNAL_DAC2
[ 13.357786] [drm] DFP1: INTERNAL_TMDS1
[ 13.358055] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:10.0 on minor 0
[ 13.453385] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09
[ 13.453507] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.453550] usb usb5: Product: OHCI PCI host controller
[ 13.453581] usb usb5: Manufacturer: Linux 6.9.3-gentoo-PMacG4 ohci_hcd
[ 13.453642] usb usb5: SerialNumber: 0001:00:1b.0
[ 13.459736] hub 5-0:1.0: USB hub found
[ 13.459887] hub 5-0:1.0: 3 ports detected
[ 13.468408] ohci-pci 0001:00:1b.1: OHCI PCI host controller
[ 13.468511] ohci-pci 0001:00:1b.1: new USB bus registered, assigned bus number 6
[ 13.468711] ohci-pci 0001:00:1b.1: irq 63, io mem 0x80083000
[ 13.615965] [drm] fb mappable at 0xA0040000
[ 13.616067] [drm] vram apper at 0xA0000000
[ 13.616124] [drm] size 8294400
[ 13.616197] [drm] fb depth is 24
[ 13.616222] [drm] pitch is 7680
[ 13.702044] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.09
[ 13.702069] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.702078] usb usb6: Product: OHCI PCI host controller
[ 13.702085] usb usb6: Manufacturer: Linux 6.9.3-gentoo-PMacG4 ohci_hcd
[ 13.702092] usb usb6: SerialNumber: 0001:00:1b.1
[ 13.702544] Console: switching to colour frame buffer device 240x67
[ 13.703490] hub 6-0:1.0: USB hub found
[ 13.703574] hub 6-0:1.0: 2 ports detected
[ 13.793206] radeon 0000:00:10.0: [drm] fb0: radeondrmfb frame buffer device
[ 14.251870] gem 0002:00:0f.0 enP2p0s15: renamed from eth0 (while UP)
[ 14.344627] ADM1030 fan controller [@2c]
[ 14.370755] DS1775 digital thermometer [@49]
[ 14.370997] Temp: 57.5 C
[ 14.371038] Hyst: 70.0 C
[ 14.371152] OS: 75.0 C
[ 14.371283]
[ 15.305907] EXT4-fs (sda5): re-mounted fa07e66f-b4f9-404f-85d8-487d3c097aec r/w. Quota mode: disabled.
[ 15.396887] EXT4-fs (sda5): re-mounted fa07e66f-b4f9-404f-85d8-487d3c097aec r/w. Quota mode: disabled.
[ 15.904380] Adding 8388604k swap on /dev/sdb6. Priority:-2 extents:1 across:8388604k
[ 16.136316] EXT4-fs (sdc5): mounting ext2 file system using the ext4 subsystem
[ 16.145437] EXT4-fs (sdc5): mounted filesystem e4e8af9e-0f0d-44f9-b983-71bf61d782de r/w without journal. Quota mode: disabled.
[ 16.146098] ext2 filesystem being mounted at /boot supports timestamps until 2038-01-19 (0x7fffffff)
[ 16.148436] BTRFS: device label tmp devid 1 transid 4845 /dev/sda6 (8:6) scanned by mount (881)
[ 16.151005] BTRFS info (device sda6): first mount of filesystem 65162d91-887e-4e48-a356-fbf7093eefb5
[ 16.151406] BTRFS info (device sda6): using xxhash64 (xxhash64-generic) checksum algorithm
[ 16.151766] BTRFS info (device sda6): using free-space-tree
[ 17.366219] random: crng init done
[ 176.526648] CPU-temp: 58.8 C
[ 176.526700] , Case: 35.5 C
[ 176.526948] , Fan: 5 (tuned +1)
[ 182.252762] kswapd0: page allocation failure: order:0, mode:0xcc0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0
[ 182.253285] CPU: 0 PID: 39 Comm: kswapd0 Not tainted 6.9.3-gentoo-PMacG4 #3
[ 182.253569] Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
[ 182.253810] Call Trace:
[ 182.253924] [c1cd1750] [c076e6fc] dump_stack_lvl+0x70/0x8c (unreliable)
[ 182.254224] [c1cd1770] [c01accac] warn_alloc+0x100/0x178
[ 182.254460] [c1cd17d0] [c01ad094] __alloc_pages+0x370/0x8d0
[ 182.254698] [c1cd1890] [c01b1844] alloc_slab_page+0x30/0x6c
[ 182.254942] [c1cd18b0] [c01b22c4] new_slab+0xd4/0x2f8
[ 182.255161] [c1cd18f0] [c01b456c] ___slab_alloc+0x3a4/0x580
[ 182.255403] [c1cd1970] [c01b4eec] kmem_cache_alloc_node+0xfc/0x23c
[ 182.255659] [c1cd19c0] [c01c1cac] zswap_store+0x16c/0x664
[ 182.255892] [c1cd1a40] [c01b99f8] swap_writepage+0x3c/0xa8
[ 182.256131] [c1cd1a60] [c016f89c] pageout+0x11c/0x1ec
[ 182.256345] [c1cd1b60] [c01718b4] shrink_folio_list+0x6b8/0x89c
[ 182.256600] [c1cd1c50] [c01732c8] evict_folios+0x9e4/0xd04
[ 182.256829] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 182.256836] cache: skbuff_head_cache, object size: 176, buffer size: 224, default order: 0, min order: 0
[ 182.256844] node 0: slabs: 25, objs: 450, free: 0
[ 182.257115] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 182.257122] cache: skbuff_head_cache, object size: 176, buffer size: 224, default order: 0, min order: 0
[ 182.257129] node 0: slabs: 25, objs: 450, free: 0
[ 182.257140] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 182.257145] cache: skbuff_head_cache, object size: 176, buffer size: 224, default order: 0, min order: 0
[ 182.257152] node 0: slabs: 25, objs: 450, free: 0
[ 182.257517] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 182.257522] cache: skbuff_head_cache, object size: 176, buffer size: 224, default order: 0, min order: 0
[ 182.257530] node 0: slabs: 25, objs: 450, free: 0
[ 182.257540] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 182.257546] cache: skbuff_head_cache, object size: 176, buffer size: 224, default order: 0, min order: 0
[ 182.257553] node 0: slabs: 25, objs: 450, free: 0
[ 182.257758] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 182.257764] cache: skbuff_head_cache, object size: 176, buffer size: 224, default order: 0, min order: 0
[ 182.257771] node 0: slabs: 25, objs: 450, free: 0
[ 182.257781] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 182.257787] cache: skbuff_head_cache, object size: 176, buffer size: 224, default order: 0, min order: 0
[ 182.257794] node 0: slabs: 25, objs: 450, free: 0
[ 182.258073] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 182.258079] cache: skbuff_head_cache, object size: 176, buffer size: 224, default order: 0, min order: 0
[ 182.258086] node 0: slabs: 25, objs: 450, free: 0
[ 182.258097] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 182.258103] cache: skbuff_head_cache, object size: 176, buffer size: 224, default order: 0, min order: 0
[ 182.258109] node 0: slabs: 25, objs: 450, free: 0
[ 182.258475] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 182.258481] cache: skbuff_head_cache, object size: 176, buffer size: 224, default order: 0, min order: 0
[ 182.258488] node 0: slabs: 25, objs: 450, free: 0
[ 182.265402] [c1cd1d50] [c017372c] try_to_shrink_lruvec+0x144/0x20c
[ 182.268490] Mem-Info:
[ 182.269041] active_anon:265096 inactive_anon:218713 isolated_anon:0
[ 182.269041] active_file:9861 inactive_file:2301 isolated_file:0
[ 182.269041] unevictable:4 dirty:0 writeback:1
[ 182.269041] slab_reclaimable:787 slab_unreclaimable:5963
[ 182.269041] mapped:11139 shmem:592 pagetables:730
[ 182.269041] sec_pagetables:0 bounce:0
[ 182.269041] kernel_misc_reclaimable:0
[ 182.269041] free:75 free_pcp:146 free_cma:0
[ 182.270686] Node 0 active_anon:1060384kB inactive_anon:874852kB active_file:39444kB inactive_file:9204kB unevictable:16kB isolated(anon):0kB isolated(file):0kB mapped:44556kB dirty:0kB writeback:4kB shmem:2368kB writeback_tmp:0kB kernel_stack:1016kB pagetables:2920kB sec_pagetables:0kB all_unreclaimable? no
[ 182.288530] DMA free:0kB boost:7780kB min:11240kB low:12104kB high:12968kB reserved_highatomic:0KB active_anon:697776kB inactive_anon:388kB active_file:112kB inactive_file:196kB unevictable:0kB writepending:0kB present:786432kB managed:749368kB mlocked:0kB bounce:0kB free_pcp:584kB local_pcp:100kB free_cma:0kB
[ 182.325168] lowmem_reserve[]: 0 0 1280 1280
[ 182.345492] DMA: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 0kB
[ 182.366274] 18073 total pagecache pages
[ 182.386483] 5315 pages in swap cache
[ 182.407138] Free swap = 8347060kB
[ 182.427405] Total swap = 8388604kB
[ 182.447565] 524288 pages RAM
[ 182.467666] 327680 pages HighMem/MovableOnly
[ 182.487812] 9266 pages reserved
[ 295.589572] BTRFS info (device sda6): last unmount of filesystem 65162d91-887e-4e48-a356-fbf7093eefb5
[ 295.664890] EXT4-fs (sdc5): unmounting filesystem e4e8af9e-0f0d-44f9-b983-71bf61d782de.
[ 298.648840] elogind-daemon[1520]: Received signal 15 [TERM]
[ 299.289689] EXT4-fs (sda5): re-mounted fa07e66f-b4f9-404f-85d8-487d3c097aec ro. Quota mode: disabled.
[ 299.480902] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 299.498655] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 299.516046] reboot: Restarting system
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-02 18:03 ` Erhard Furtner
2024-06-02 20:38 ` Yu Zhao
@ 2024-06-03 22:13 ` Erhard Furtner
2024-06-03 23:24 ` Yosry Ahmed
1 sibling, 1 reply; 45+ messages in thread
From: Erhard Furtner @ 2024-06-03 22:13 UTC (permalink / raw)
To: Yu Zhao; +Cc: linux-mm, linux-kernel, linuxppc-dev, Yosry Ahmed
[-- Attachment #1: Type: text/plain, Size: 5120 bytes --]
On Sun, 2 Jun 2024 20:03:32 +0200
Erhard Furtner <erhard_f@mailbox.org> wrote:
> On Sat, 1 Jun 2024 00:01:48 -0600
> Yu Zhao <yuzhao@google.com> wrote:
>
> > The OOM kills on both kernel versions seem to be reasonable to me.
> >
> > Your system has 2GB memory and it uses zswap with zsmalloc (which is
> > good since it can allocate from the highmem zone) and zstd/lzo (which
> > doesn't matter much). Somehow -- I couldn't figure out why -- it
> > splits the 2GB into a 0.25GB DMA zone and a 1.75GB highmem zone:
> >
> > [ 0.000000] Zone ranges:
> > [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
> > [ 0.000000] Normal empty
> > [ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff]
> >
> > The kernel can't allocate from the highmem zone -- only userspace and
> > zsmalloc can. OOM kills were due to the low memory conditions in the
> > DMA zone where the kernel itself failed to allocate from.
> >
> > Do you know a kernel version that doesn't have OOM kills while running
> > the same workload? If so, could you send that .config to me? If not,
> > could you try disabling CONFIG_HIGHMEM? (It might not help but I'm out
> > of ideas at the moment.)
Ok, the bisect I did actually revealed something meaningful:
# git bisect good
b8cf32dc6e8c75b712cbf638e0fd210101c22f17 is the first bad commit
commit b8cf32dc6e8c75b712cbf638e0fd210101c22f17
Author: Yosry Ahmed <yosryahmed@google.com>
Date: Tue Jun 20 19:46:44 2023 +0000
mm: zswap: multiple zpools support
Support using multiple zpools of the same type in zswap, for concurrency
purposes. A fixed number of 32 zpools is suggested by this commit, which
was determined empirically. It can be later changed or made into a config
option if needed.
On a setup with zswap and zsmalloc, comparing a single zpool to 32 zpools
shows improvements in the zsmalloc lock contention, especially on the swap
out path.
The following shows the perf analysis of the swapout path when 10
workloads are simultaneously reclaiming and refaulting tmpfs pages. There
are some improvements on the swap in path as well, but less significant.
1 zpool:
|--28.99%--zswap_frontswap_store
|
<snip>
|
|--8.98%--zpool_map_handle
| |
| --8.98%--zs_zpool_map
| |
| --8.95%--zs_map_object
| |
| --8.38%--_raw_spin_lock
| |
| --7.39%--queued_spin_lock_slowpath
|
|--8.82%--zpool_malloc
| |
| --8.82%--zs_zpool_malloc
| |
| --8.80%--zs_malloc
| |
| |--7.21%--_raw_spin_lock
| | |
| | --6.81%--queued_spin_lock_slowpath
<snip>
32 zpools:
|--16.73%--zswap_frontswap_store
|
<snip>
|
|--1.81%--zpool_malloc
| |
| --1.81%--zs_zpool_malloc
| |
| --1.79%--zs_malloc
| |
| --0.73%--obj_malloc
|
|--1.06%--zswap_update_total_size
|
|--0.59%--zpool_map_handle
| |
| --0.59%--zs_zpool_map
| |
| --0.57%--zs_map_object
| |
| --0.51%--_raw_spin_lock
<snip>
Link: https://lkml.kernel.org/r/20230620194644.3142384-1-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Suggested-by: Yu Zhao <yuzhao@google.com>
Acked-by: Chris Li (Google) <chrisl@kernel.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Tested-by: Nhat Pham <nphamcs@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mm/zswap.c | 81 +++++++++++++++++++++++++++++++++++++++++---------------------
1 file changed, 54 insertions(+), 27 deletions(-)
'bad' bisects were where the "kswapd0: page allocation failure:" showed up when running the workload, 'good' bisects were the cases where I only got the kernels OOM reaper killing the workload. In the good cases the machine stayed usable via VNC, in the bad cases with the issue showing up the machine crashed and rebooted >80% of the time shortly after showing the issue in dmesg (via netconsole). I triple checked the good cases to be sure only the OOM reaper showed up and not the kswapd0: page allocation failure.
Bisect.log attached.
Regards,
Erhard
[-- Attachment #2: bisect.log --]
[-- Type: text/x-log, Size: 3471 bytes --]
git bisect start
# Status: warte auf guten und schlechten Commit
# good: [88690811da69826fdb59d908a6e5e9d0c63b581a] Linux 6.1.92
git bisect good 88690811da69826fdb59d908a6e5e9d0c63b581a
# Status: warte auf schlechten Commit, 1 guter Commit bekannt
# bad: [a38297e3fb012ddfa7ce0321a7e5a8daeb1872b6] Linux 6.9
git bisect bad a38297e3fb012ddfa7ce0321a7e5a8daeb1872b6
# good: [830b3c68c1fb1e9176028d02ef86f3cf76aa2476] Linux 6.1
git bisect good 830b3c68c1fb1e9176028d02ef86f3cf76aa2476
# good: [1b580c9bb63414903cfb414571e92e4fd36d6969] Merge branch 'samples-bpf-remove-unmaintained-xdp-sample-utilities'
git bisect good 1b580c9bb63414903cfb414571e92e4fd36d6969
# bad: [5ab500d6f9f50d8246865a2ead85d0e88ea30004] Merge branch 'sfc-implement-ndo_hwtstamp_-get-set'
git bisect bad 5ab500d6f9f50d8246865a2ead85d0e88ea30004
# bad: [cc33a80b816406f900a53c7f98a50f6eacdd2e31] MAINTAINERS: Maintainer change for ptp_vmw driver
git bisect bad cc33a80b816406f900a53c7f98a50f6eacdd2e31
# bad: [4debf77169ee459c46ec70e13dc503bc25efd7d2] Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
git bisect bad 4debf77169ee459c46ec70e13dc503bc25efd7d2
# bad: [1086eeac9c333b6db6c98594f02996c8261c60c5] Merge tag 'lsm-pr-20230829' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
git bisect bad 1086eeac9c333b6db6c98594f02996c8261c60c5
# good: [0fc81f376468ce67d70ecd1016dfe901a51a39f5] Merge tag 'regmap-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
git bisect good 0fc81f376468ce67d70ecd1016dfe901a51a39f5
# good: [bd6c11bc43c496cddfc6cf603b5d45365606dbd5] Merge tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
git bisect good bd6c11bc43c496cddfc6cf603b5d45365606dbd5
# bad: [5553b15a4bbba8039e1f31b63642048286f540dc] m68k: implement the new page table range API
git bisect bad 5553b15a4bbba8039e1f31b63642048286f540dc
# good: [0c2e394ab23017303f676e6206a54c54bb0e3681] mm: move FAULT_FLAG_VMA_LOCK check down in handle_pte_fault()
git bisect good 0c2e394ab23017303f676e6206a54c54bb0e3681
# bad: [3f32c49ed6f15c8412a8abc93a92c4b37e6c4592] mm: memtest: convert to memtest_report_meminfo()
git bisect bad 3f32c49ed6f15c8412a8abc93a92c4b37e6c4592
# bad: [6ad243b83b5094026fdb3171711ddb25246b3d8a] mm/damon/sysfs: implement a command for updating only schemes tried total bytes
git bisect bad 6ad243b83b5094026fdb3171711ddb25246b3d8a
# bad: [68af05143fd4b49d4b12eab8d63c91ffbc7c4e5e] kernel/iomem.c: remove __weak ioremap_cache helper
git bisect bad 68af05143fd4b49d4b12eab8d63c91ffbc7c4e5e
# good: [27af67f35631ac4b61b5e4455b44c9aee8d2cc4b] powerpc/book3s64/mm: enable transparent pud hugepage
git bisect good 27af67f35631ac4b61b5e4455b44c9aee8d2cc4b
# bad: [34f4c198bfbe86612c368eb122002787acecaa93] zswap: make zswap_store() take a folio
git bisect bad 34f4c198bfbe86612c368eb122002787acecaa93
# good: [601f006fddc66e369fdac7c572f981eafd159dac] powerpc/book3s64/radix: remove mmu_vmemmap_psize
git bisect good 601f006fddc66e369fdac7c572f981eafd159dac
# bad: [b8cf32dc6e8c75b712cbf638e0fd210101c22f17] mm: zswap: multiple zpools support
git bisect bad b8cf32dc6e8c75b712cbf638e0fd210101c22f17
# good: [6be3601517d90b728095d70c14f3a04b9adcb166] powerpc/book3s64/radix: add debug message to give more details of vmemmap allocation
git bisect good 6be3601517d90b728095d70c14f3a04b9adcb166
# first bad commit: [b8cf32dc6e8c75b712cbf638e0fd210101c22f17] mm: zswap: multiple zpools support
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-03 22:13 ` Erhard Furtner
@ 2024-06-03 23:24 ` Yosry Ahmed
[not found] ` <20240604134458.3ae4396a@yea>
2024-06-04 20:52 ` Vlastimil Babka (SUSE)
0 siblings, 2 replies; 45+ messages in thread
From: Yosry Ahmed @ 2024-06-03 23:24 UTC (permalink / raw)
To: Erhard Furtner; +Cc: Yu Zhao, linux-mm, linux-kernel, linuxppc-dev
[-- Attachment #1: Type: text/plain, Size: 2292 bytes --]
On Mon, Jun 3, 2024 at 3:13 PM Erhard Furtner <erhard_f@mailbox.org> wrote:
>
> On Sun, 2 Jun 2024 20:03:32 +0200
> Erhard Furtner <erhard_f@mailbox.org> wrote:
>
> > On Sat, 1 Jun 2024 00:01:48 -0600
> > Yu Zhao <yuzhao@google.com> wrote:
> >
> > > The OOM kills on both kernel versions seem to be reasonable to me.
> > >
> > > Your system has 2GB memory and it uses zswap with zsmalloc (which is
> > > good since it can allocate from the highmem zone) and zstd/lzo (which
> > > doesn't matter much). Somehow -- I couldn't figure out why -- it
> > > splits the 2GB into a 0.25GB DMA zone and a 1.75GB highmem zone:
> > >
> > > [ 0.000000] Zone ranges:
> > > [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
> > > [ 0.000000] Normal empty
> > > [ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff]
> > >
> > > The kernel can't allocate from the highmem zone -- only userspace and
> > > zsmalloc can. OOM kills were due to the low memory conditions in the
> > > DMA zone where the kernel itself failed to allocate from.
> > >
> > > Do you know a kernel version that doesn't have OOM kills while running
> > > the same workload? If so, could you send that .config to me? If not,
> > > could you try disabling CONFIG_HIGHMEM? (It might not help but I'm out
> > > of ideas at the moment.)
>
> Ok, the bisect I did actually revealed something meaningful:
>
> # git bisect good
> b8cf32dc6e8c75b712cbf638e0fd210101c22f17 is the first bad commit
> commit b8cf32dc6e8c75b712cbf638e0fd210101c22f17
> Author: Yosry Ahmed <yosryahmed@google.com>
> Date: Tue Jun 20 19:46:44 2023 +0000
>
> mm: zswap: multiple zpools support
Thanks for bisecting. Taking a look at the thread, it seems like you
have a very limited area of memory to allocate kernel memory from. One
possible reason why that commit can cause an issue is because we will
have multiple instances of the zsmalloc slab caches 'zspage' and
'zs_handle', which may contribute to fragmentation in slab memory.
Do you have /proc/slabinfo from a good and a bad run by any chance?
Also, could you check if the attached patch helps? It makes sure that
even when we use multiple zsmalloc zpools, we will use a single slab
cache of each type.
[-- Attachment #2: 0001-mm-zsmalloc-share-slab-caches-for-all-zsmalloc-zpool.patch --]
[-- Type: application/octet-stream, Size: 3744 bytes --]
From 1ac0fa34783f66ea7334fd2e9129bc362bee51dd Mon Sep 17 00:00:00 2001
From: Yosry Ahmed <yosryahmed@google.com>
Date: Sat, 13 May 2023 01:10:34 +0000
Subject: [PATCH] mm: zsmalloc: share slab caches for all zsmalloc zpools
Zswap creates 32 zpools to improve concurrency. Each zsmalloc zpool
creates its own 'zs_handle' and 'zspage' slab caches. We end up with 32
slab caches of each type.
Since each slab cache holds some free objects, we end up with a lot of
free objects distributed among the separate zpool caches. Slab caches
are designed to handle concurrent allocations by using percpu
structures, so having a single instance of each cache should be enough,
and avoids wasting more memory than needed due to fragmentation.
Additionally, having more slab caches than needed unnecessarily slows
down code paths that iterate slab_caches.
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
---
mm/zsmalloc.c | 60 ++++++++++++++++++++++++++++-----------------------
1 file changed, 33 insertions(+), 27 deletions(-)
diff --git a/mm/zsmalloc.c b/mm/zsmalloc.c
index b42d3545ca856..c3c90618ec8b4 100644
--- a/mm/zsmalloc.c
+++ b/mm/zsmalloc.c
@@ -289,29 +289,8 @@ static void init_deferred_free(struct zs_pool *pool) {}
static void SetZsPageMovable(struct zs_pool *pool, struct zspage *zspage) {}
#endif
-static int create_cache(struct zs_pool *pool)
-{
- pool->handle_cachep = kmem_cache_create("zs_handle", ZS_HANDLE_SIZE,
- 0, 0, NULL);
- if (!pool->handle_cachep)
- return 1;
-
- pool->zspage_cachep = kmem_cache_create("zspage", sizeof(struct zspage),
- 0, 0, NULL);
- if (!pool->zspage_cachep) {
- kmem_cache_destroy(pool->handle_cachep);
- pool->handle_cachep = NULL;
- return 1;
- }
-
- return 0;
-}
-
-static void destroy_cache(struct zs_pool *pool)
-{
- kmem_cache_destroy(pool->handle_cachep);
- kmem_cache_destroy(pool->zspage_cachep);
-}
+static struct kmem_cache *zs_handle_cache;
+static struct kmem_cache *zspage_cache;
static unsigned long cache_alloc_handle(struct zs_pool *pool, gfp_t gfp)
{
@@ -2107,13 +2086,13 @@ struct zs_pool *zs_create_pool(const char *name)
spin_lock_init(&pool->lock);
atomic_set(&pool->compaction_in_progress, 0);
+ pool->handle_cachep = zs_handle_cache;
+ pool->zspage_cachep = zspage_cache;
+
pool->name = kstrdup(name, GFP_KERNEL);
if (!pool->name)
goto err;
- if (create_cache(pool))
- goto err;
-
/*
* Iterate reversely, because, size of size_class that we want to use
* for merging should be larger or equal to current size.
@@ -2234,16 +2213,41 @@ void zs_destroy_pool(struct zs_pool *pool)
kfree(class);
}
- destroy_cache(pool);
kfree(pool->name);
kfree(pool);
}
EXPORT_SYMBOL_GPL(zs_destroy_pool);
+static void zs_destroy_caches(void)
+{
+ kmem_cache_destroy(zs_handle_cache);
+ kmem_cache_destroy(zspage_cache);
+ zs_handle_cache = NULL;
+ zspage_cache = NULL;
+}
+
+static int zs_create_caches(void)
+{
+ zs_handle_cache = kmem_cache_create("zs_handle", ZS_HANDLE_SIZE,
+ 0, 0, NULL);
+ zspage_cache = kmem_cache_create("zspage", sizeof(struct zspage),
+ 0, 0, NULL);
+
+ if (!zs_handle_cache || !zspage_cache) {
+ zs_destroy_caches();
+ return -1;
+ }
+ return 0;
+}
+
static int __init zs_init(void)
{
int ret;
+ ret = zs_create_caches();
+ if (ret)
+ goto out;
+
ret = cpuhp_setup_state(CPUHP_MM_ZS_PREPARE, "mm/zsmalloc:prepare",
zs_cpu_prepare, zs_cpu_dead);
if (ret)
@@ -2258,6 +2262,7 @@ static int __init zs_init(void)
return 0;
out:
+ zs_destroy_caches();
return ret;
}
@@ -2269,6 +2274,7 @@ static void __exit zs_exit(void)
cpuhp_remove_state(CPUHP_MM_ZS_PREPARE);
zs_stat_exit();
+ zs_destroy_caches();
}
module_init(zs_init);
--
2.45.1.288.g0e0cd299f1-goog
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
[not found] ` <20240604134458.3ae4396a@yea>
@ 2024-06-04 16:11 ` Yosry Ahmed
2024-06-04 17:18 ` Yu Zhao
0 siblings, 1 reply; 45+ messages in thread
From: Yosry Ahmed @ 2024-06-04 16:11 UTC (permalink / raw)
To: Erhard Furtner
Cc: Yu Zhao, linux-mm, linux-kernel, linuxppc-dev, Johannes Weiner,
Nhat Pham, Chengming Zhou, Sergey Senozhatsky, Minchan Kim
On Tue, Jun 4, 2024 at 4:45 AM Erhard Furtner <erhard_f@mailbox.org> wrote:
>
> On Mon, 3 Jun 2024 16:24:02 -0700
> Yosry Ahmed <yosryahmed@google.com> wrote:
>
> > Thanks for bisecting. Taking a look at the thread, it seems like you
> > have a very limited area of memory to allocate kernel memory from. One
> > possible reason why that commit can cause an issue is because we will
> > have multiple instances of the zsmalloc slab caches 'zspage' and
> > 'zs_handle', which may contribute to fragmentation in slab memory.
> >
> > Do you have /proc/slabinfo from a good and a bad run by any chance?
> >
> > Also, could you check if the attached patch helps? It makes sure that
> > even when we use multiple zsmalloc zpools, we will use a single slab
> > cache of each type.
>
> Thanks for looking into this! I got you 'cat /proc/slabinfo' from a good HEAD, from a bad HEAD and from the bad HEAD + your patch applied.
>
> Good was 6be3601517d90b728095d70c14f3a04b9adcb166, bad was b8cf32dc6e8c75b712cbf638e0fd210101c22f17 which I got both from my bisect.log. I got the slabinfo shortly after boot and a 2nd time shortly before the OOM or the kswapd0: page allocation failure happens. I terminated the workload (stress-ng --vm 2 --vm-bytes 1930M --verify -v) manually shortly before the 2 GiB RAM exhausted and got the slabinfo then.
>
> The patch applied to git b8cf32dc6e8c75b712cbf638e0fd210101c22f17 unfortunately didn't make a difference, I got the kswapd0: page allocation failure nevertheless.
Thanks for trying this out. The patch reduces the amount of wasted
memory due to the 'zs_handle' and 'zspage' caches by an order of
magnitude, but it was a small number to begin with (~250K).
I cannot think of other reasons why having multiple zsmalloc pools
will end up using more memory in the 0.25GB zone that the kernel
allocations can be made from.
The number of zpools can be made configurable or determined at runtime
by the size of the machine, but I don't want to do this without
understanding the problem here first. Adding other zswap and zsmalloc
folks in case they have any ideas.
>
> Regards,
> Erhard
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-04 16:11 ` Yosry Ahmed
@ 2024-06-04 17:18 ` Yu Zhao
2024-06-04 17:34 ` Yosry Ahmed
2024-06-04 22:17 ` Erhard Furtner
0 siblings, 2 replies; 45+ messages in thread
From: Yu Zhao @ 2024-06-04 17:18 UTC (permalink / raw)
To: Erhard Furtner
Cc: linux-mm, linux-kernel, linuxppc-dev, Johannes Weiner, Nhat Pham,
Chengming Zhou, Sergey Senozhatsky, Minchan Kim, Yosry Ahmed
On Tue, Jun 4, 2024 at 10:12 AM Yosry Ahmed <yosryahmed@google.com> wrote:
>
> On Tue, Jun 4, 2024 at 4:45 AM Erhard Furtner <erhard_f@mailbox.org> wrote:
> >
> > On Mon, 3 Jun 2024 16:24:02 -0700
> > Yosry Ahmed <yosryahmed@google.com> wrote:
> >
> > > Thanks for bisecting. Taking a look at the thread, it seems like you
> > > have a very limited area of memory to allocate kernel memory from. One
> > > possible reason why that commit can cause an issue is because we will
> > > have multiple instances of the zsmalloc slab caches 'zspage' and
> > > 'zs_handle', which may contribute to fragmentation in slab memory.
> > >
> > > Do you have /proc/slabinfo from a good and a bad run by any chance?
> > >
> > > Also, could you check if the attached patch helps? It makes sure that
> > > even when we use multiple zsmalloc zpools, we will use a single slab
> > > cache of each type.
> >
> > Thanks for looking into this! I got you 'cat /proc/slabinfo' from a good HEAD, from a bad HEAD and from the bad HEAD + your patch applied.
> >
> > Good was 6be3601517d90b728095d70c14f3a04b9adcb166, bad was b8cf32dc6e8c75b712cbf638e0fd210101c22f17 which I got both from my bisect.log. I got the slabinfo shortly after boot and a 2nd time shortly before the OOM or the kswapd0: page allocation failure happens. I terminated the workload (stress-ng --vm 2 --vm-bytes 1930M --verify -v) manually shortly before the 2 GiB RAM exhausted and got the slabinfo then.
> >
> > The patch applied to git b8cf32dc6e8c75b712cbf638e0fd210101c22f17 unfortunately didn't make a difference, I got the kswapd0: page allocation failure nevertheless.
>
> Thanks for trying this out. The patch reduces the amount of wasted
> memory due to the 'zs_handle' and 'zspage' caches by an order of
> magnitude, but it was a small number to begin with (~250K).
>
> I cannot think of other reasons why having multiple zsmalloc pools
> will end up using more memory in the 0.25GB zone that the kernel
> allocations can be made from.
>
> The number of zpools can be made configurable or determined at runtime
> by the size of the machine, but I don't want to do this without
> understanding the problem here first. Adding other zswap and zsmalloc
> folks in case they have any ideas.
Hi Erhard,
If it's not too much trouble, could you "grep nr_zspages /proc/vmstat"
on kernels before and after the bad commit? It'd be great if you could
run the grep command right before the OOM kills.
The overall internal fragmentation of multiple zsmalloc pools might be
higher than a single one. I suspect this might be the cause.
Thank you.
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-04 17:18 ` Yu Zhao
@ 2024-06-04 17:34 ` Yosry Ahmed
2024-06-04 17:53 ` Yu Zhao
2024-06-04 22:17 ` Erhard Furtner
1 sibling, 1 reply; 45+ messages in thread
From: Yosry Ahmed @ 2024-06-04 17:34 UTC (permalink / raw)
To: Yu Zhao
Cc: Erhard Furtner, linux-mm, linux-kernel, linuxppc-dev,
Johannes Weiner, Nhat Pham, Chengming Zhou, Sergey Senozhatsky,
Minchan Kim
On Tue, Jun 4, 2024 at 10:19 AM Yu Zhao <yuzhao@google.com> wrote:
>
> On Tue, Jun 4, 2024 at 10:12 AM Yosry Ahmed <yosryahmed@google.com> wrote:
> >
> > On Tue, Jun 4, 2024 at 4:45 AM Erhard Furtner <erhard_f@mailbox.org> wrote:
> > >
> > > On Mon, 3 Jun 2024 16:24:02 -0700
> > > Yosry Ahmed <yosryahmed@google.com> wrote:
> > >
> > > > Thanks for bisecting. Taking a look at the thread, it seems like you
> > > > have a very limited area of memory to allocate kernel memory from. One
> > > > possible reason why that commit can cause an issue is because we will
> > > > have multiple instances of the zsmalloc slab caches 'zspage' and
> > > > 'zs_handle', which may contribute to fragmentation in slab memory.
> > > >
> > > > Do you have /proc/slabinfo from a good and a bad run by any chance?
> > > >
> > > > Also, could you check if the attached patch helps? It makes sure that
> > > > even when we use multiple zsmalloc zpools, we will use a single slab
> > > > cache of each type.
> > >
> > > Thanks for looking into this! I got you 'cat /proc/slabinfo' from a good HEAD, from a bad HEAD and from the bad HEAD + your patch applied.
> > >
> > > Good was 6be3601517d90b728095d70c14f3a04b9adcb166, bad was b8cf32dc6e8c75b712cbf638e0fd210101c22f17 which I got both from my bisect.log. I got the slabinfo shortly after boot and a 2nd time shortly before the OOM or the kswapd0: page allocation failure happens. I terminated the workload (stress-ng --vm 2 --vm-bytes 1930M --verify -v) manually shortly before the 2 GiB RAM exhausted and got the slabinfo then.
> > >
> > > The patch applied to git b8cf32dc6e8c75b712cbf638e0fd210101c22f17 unfortunately didn't make a difference, I got the kswapd0: page allocation failure nevertheless.
> >
> > Thanks for trying this out. The patch reduces the amount of wasted
> > memory due to the 'zs_handle' and 'zspage' caches by an order of
> > magnitude, but it was a small number to begin with (~250K).
> >
> > I cannot think of other reasons why having multiple zsmalloc pools
> > will end up using more memory in the 0.25GB zone that the kernel
> > allocations can be made from.
> >
> > The number of zpools can be made configurable or determined at runtime
> > by the size of the machine, but I don't want to do this without
> > understanding the problem here first. Adding other zswap and zsmalloc
> > folks in case they have any ideas.
>
> Hi Erhard,
>
> If it's not too much trouble, could you "grep nr_zspages /proc/vmstat"
> on kernels before and after the bad commit? It'd be great if you could
> run the grep command right before the OOM kills.
>
> The overall internal fragmentation of multiple zsmalloc pools might be
> higher than a single one. I suspect this might be the cause.
I thought about the internal fragmentation of pools, but zsmalloc
should have access to highmem, and if I understand correctly the
problem here is that we are running out of space in the DMA zone when
making kernel allocations.
Do you suspect zsmalloc is allocating memory from the DMA zone
initially, even though it has access to highmem?
>
> Thank you.
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-04 17:34 ` Yosry Ahmed
@ 2024-06-04 17:53 ` Yu Zhao
2024-06-04 18:01 ` Yosry Ahmed
0 siblings, 1 reply; 45+ messages in thread
From: Yu Zhao @ 2024-06-04 17:53 UTC (permalink / raw)
To: Yosry Ahmed
Cc: Erhard Furtner, linux-mm, linux-kernel, linuxppc-dev,
Johannes Weiner, Nhat Pham, Chengming Zhou, Sergey Senozhatsky,
Minchan Kim
On Tue, Jun 4, 2024 at 11:34 AM Yosry Ahmed <yosryahmed@google.com> wrote:
>
> On Tue, Jun 4, 2024 at 10:19 AM Yu Zhao <yuzhao@google.com> wrote:
> >
> > On Tue, Jun 4, 2024 at 10:12 AM Yosry Ahmed <yosryahmed@google.com> wrote:
> > >
> > > On Tue, Jun 4, 2024 at 4:45 AM Erhard Furtner <erhard_f@mailbox.org> wrote:
> > > >
> > > > On Mon, 3 Jun 2024 16:24:02 -0700
> > > > Yosry Ahmed <yosryahmed@google.com> wrote:
> > > >
> > > > > Thanks for bisecting. Taking a look at the thread, it seems like you
> > > > > have a very limited area of memory to allocate kernel memory from. One
> > > > > possible reason why that commit can cause an issue is because we will
> > > > > have multiple instances of the zsmalloc slab caches 'zspage' and
> > > > > 'zs_handle', which may contribute to fragmentation in slab memory.
> > > > >
> > > > > Do you have /proc/slabinfo from a good and a bad run by any chance?
> > > > >
> > > > > Also, could you check if the attached patch helps? It makes sure that
> > > > > even when we use multiple zsmalloc zpools, we will use a single slab
> > > > > cache of each type.
> > > >
> > > > Thanks for looking into this! I got you 'cat /proc/slabinfo' from a good HEAD, from a bad HEAD and from the bad HEAD + your patch applied.
> > > >
> > > > Good was 6be3601517d90b728095d70c14f3a04b9adcb166, bad was b8cf32dc6e8c75b712cbf638e0fd210101c22f17 which I got both from my bisect.log. I got the slabinfo shortly after boot and a 2nd time shortly before the OOM or the kswapd0: page allocation failure happens. I terminated the workload (stress-ng --vm 2 --vm-bytes 1930M --verify -v) manually shortly before the 2 GiB RAM exhausted and got the slabinfo then.
> > > >
> > > > The patch applied to git b8cf32dc6e8c75b712cbf638e0fd210101c22f17 unfortunately didn't make a difference, I got the kswapd0: page allocation failure nevertheless.
> > >
> > > Thanks for trying this out. The patch reduces the amount of wasted
> > > memory due to the 'zs_handle' and 'zspage' caches by an order of
> > > magnitude, but it was a small number to begin with (~250K).
> > >
> > > I cannot think of other reasons why having multiple zsmalloc pools
> > > will end up using more memory in the 0.25GB zone that the kernel
> > > allocations can be made from.
> > >
> > > The number of zpools can be made configurable or determined at runtime
> > > by the size of the machine, but I don't want to do this without
> > > understanding the problem here first. Adding other zswap and zsmalloc
> > > folks in case they have any ideas.
> >
> > Hi Erhard,
> >
> > If it's not too much trouble, could you "grep nr_zspages /proc/vmstat"
> > on kernels before and after the bad commit? It'd be great if you could
> > run the grep command right before the OOM kills.
> >
> > The overall internal fragmentation of multiple zsmalloc pools might be
> > higher than a single one. I suspect this might be the cause.
>
> I thought about the internal fragmentation of pools, but zsmalloc
> should have access to highmem, and if I understand correctly the
> problem here is that we are running out of space in the DMA zone when
> making kernel allocations.
>
> Do you suspect zsmalloc is allocating memory from the DMA zone
> initially, even though it has access to highmem?
There was a lot of user memory in the DMA zone. So at a point the
highmem zone was full and allocation fallback happened.
The problem with zone fallback is that recent allocations go into
lower zones, meaning they are further back on the LRU list. This
applies to both user memory and zsmalloc memory -- the latter has a
writeback LRU. On top of this, neither the zswap shrinker nor the
zsmalloc shrinker (compaction) is zone aware. So page reclaim might
have trouble hitting the right target zone.
We can't really tell how zspages are distributed across zones, but the
overall number might be helpful. It'd be great if someone could make
nr_zspages per zone :)
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-04 17:53 ` Yu Zhao
@ 2024-06-04 18:01 ` Yosry Ahmed
2024-06-04 21:00 ` Vlastimil Babka (SUSE)
2024-06-04 21:10 ` Erhard Furtner
0 siblings, 2 replies; 45+ messages in thread
From: Yosry Ahmed @ 2024-06-04 18:01 UTC (permalink / raw)
To: Yu Zhao
Cc: Erhard Furtner, linux-mm, linux-kernel, linuxppc-dev,
Johannes Weiner, Nhat Pham, Chengming Zhou, Sergey Senozhatsky,
Minchan Kim
On Tue, Jun 4, 2024 at 10:54 AM Yu Zhao <yuzhao@google.com> wrote:
>
> On Tue, Jun 4, 2024 at 11:34 AM Yosry Ahmed <yosryahmed@google.com> wrote:
> >
> > On Tue, Jun 4, 2024 at 10:19 AM Yu Zhao <yuzhao@google.com> wrote:
> > >
> > > On Tue, Jun 4, 2024 at 10:12 AM Yosry Ahmed <yosryahmed@google.com> wrote:
> > > >
> > > > On Tue, Jun 4, 2024 at 4:45 AM Erhard Furtner <erhard_f@mailbox.org> wrote:
> > > > >
> > > > > On Mon, 3 Jun 2024 16:24:02 -0700
> > > > > Yosry Ahmed <yosryahmed@google.com> wrote:
> > > > >
> > > > > > Thanks for bisecting. Taking a look at the thread, it seems like you
> > > > > > have a very limited area of memory to allocate kernel memory from. One
> > > > > > possible reason why that commit can cause an issue is because we will
> > > > > > have multiple instances of the zsmalloc slab caches 'zspage' and
> > > > > > 'zs_handle', which may contribute to fragmentation in slab memory.
> > > > > >
> > > > > > Do you have /proc/slabinfo from a good and a bad run by any chance?
> > > > > >
> > > > > > Also, could you check if the attached patch helps? It makes sure that
> > > > > > even when we use multiple zsmalloc zpools, we will use a single slab
> > > > > > cache of each type.
> > > > >
> > > > > Thanks for looking into this! I got you 'cat /proc/slabinfo' from a good HEAD, from a bad HEAD and from the bad HEAD + your patch applied.
> > > > >
> > > > > Good was 6be3601517d90b728095d70c14f3a04b9adcb166, bad was b8cf32dc6e8c75b712cbf638e0fd210101c22f17 which I got both from my bisect.log. I got the slabinfo shortly after boot and a 2nd time shortly before the OOM or the kswapd0: page allocation failure happens. I terminated the workload (stress-ng --vm 2 --vm-bytes 1930M --verify -v) manually shortly before the 2 GiB RAM exhausted and got the slabinfo then.
> > > > >
> > > > > The patch applied to git b8cf32dc6e8c75b712cbf638e0fd210101c22f17 unfortunately didn't make a difference, I got the kswapd0: page allocation failure nevertheless.
> > > >
> > > > Thanks for trying this out. The patch reduces the amount of wasted
> > > > memory due to the 'zs_handle' and 'zspage' caches by an order of
> > > > magnitude, but it was a small number to begin with (~250K).
> > > >
> > > > I cannot think of other reasons why having multiple zsmalloc pools
> > > > will end up using more memory in the 0.25GB zone that the kernel
> > > > allocations can be made from.
> > > >
> > > > The number of zpools can be made configurable or determined at runtime
> > > > by the size of the machine, but I don't want to do this without
> > > > understanding the problem here first. Adding other zswap and zsmalloc
> > > > folks in case they have any ideas.
> > >
> > > Hi Erhard,
> > >
> > > If it's not too much trouble, could you "grep nr_zspages /proc/vmstat"
> > > on kernels before and after the bad commit? It'd be great if you could
> > > run the grep command right before the OOM kills.
> > >
> > > The overall internal fragmentation of multiple zsmalloc pools might be
> > > higher than a single one. I suspect this might be the cause.
> >
> > I thought about the internal fragmentation of pools, but zsmalloc
> > should have access to highmem, and if I understand correctly the
> > problem here is that we are running out of space in the DMA zone when
> > making kernel allocations.
> >
> > Do you suspect zsmalloc is allocating memory from the DMA zone
> > initially, even though it has access to highmem?
>
> There was a lot of user memory in the DMA zone. So at a point the
> highmem zone was full and allocation fallback happened.
>
> The problem with zone fallback is that recent allocations go into
> lower zones, meaning they are further back on the LRU list. This
> applies to both user memory and zsmalloc memory -- the latter has a
> writeback LRU. On top of this, neither the zswap shrinker nor the
> zsmalloc shrinker (compaction) is zone aware. So page reclaim might
> have trouble hitting the right target zone.
I see what you mean. In this case, yeah I think the internal
fragmentation in the zsmalloc pools may be the reason behind the
problem.
How many CPUs does this machine have? I am wondering if 32 can be an
overkill for small machines, perhaps the number of pools should be
max(nr_cpus, 32)?
Alternatively, the number of pools should scale with the memory size
in some way, such that we only increase fragmentation when it's
tolerable.
>
> We can't really tell how zspages are distributed across zones, but the
> overall number might be helpful. It'd be great if someone could make
> nr_zspages per zone :)
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-03 23:24 ` Yosry Ahmed
[not found] ` <20240604134458.3ae4396a@yea>
@ 2024-06-04 20:52 ` Vlastimil Babka (SUSE)
2024-06-04 20:55 ` Yosry Ahmed
1 sibling, 1 reply; 45+ messages in thread
From: Vlastimil Babka (SUSE) @ 2024-06-04 20:52 UTC (permalink / raw)
To: Yosry Ahmed, Erhard Furtner; +Cc: Yu Zhao, linux-mm, linux-kernel, linuxppc-dev
On 6/4/24 1:24 AM, Yosry Ahmed wrote:
> On Mon, Jun 3, 2024 at 3:13 PM Erhard Furtner <erhard_f@mailbox.org> wrote:
>>
>> On Sun, 2 Jun 2024 20:03:32 +0200
>> Erhard Furtner <erhard_f@mailbox.org> wrote:
>>
>> > On Sat, 1 Jun 2024 00:01:48 -0600
>> > Yu Zhao <yuzhao@google.com> wrote:
>> >
>> > > The OOM kills on both kernel versions seem to be reasonable to me.
>> > >
>> > > Your system has 2GB memory and it uses zswap with zsmalloc (which is
>> > > good since it can allocate from the highmem zone) and zstd/lzo (which
>> > > doesn't matter much). Somehow -- I couldn't figure out why -- it
>> > > splits the 2GB into a 0.25GB DMA zone and a 1.75GB highmem zone:
>> > >
>> > > [ 0.000000] Zone ranges:
>> > > [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
>> > > [ 0.000000] Normal empty
>> > > [ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff]
>> > >
>> > > The kernel can't allocate from the highmem zone -- only userspace and
>> > > zsmalloc can. OOM kills were due to the low memory conditions in the
>> > > DMA zone where the kernel itself failed to allocate from.
>> > >
>> > > Do you know a kernel version that doesn't have OOM kills while running
>> > > the same workload? If so, could you send that .config to me? If not,
>> > > could you try disabling CONFIG_HIGHMEM? (It might not help but I'm out
>> > > of ideas at the moment.)
>>
>> Ok, the bisect I did actually revealed something meaningful:
>>
>> # git bisect good
>> b8cf32dc6e8c75b712cbf638e0fd210101c22f17 is the first bad commit
>> commit b8cf32dc6e8c75b712cbf638e0fd210101c22f17
>> Author: Yosry Ahmed <yosryahmed@google.com>
>> Date: Tue Jun 20 19:46:44 2023 +0000
>>
>> mm: zswap: multiple zpools support
>
> Thanks for bisecting. Taking a look at the thread, it seems like you
> have a very limited area of memory to allocate kernel memory from. One
> possible reason why that commit can cause an issue is because we will
> have multiple instances of the zsmalloc slab caches 'zspage' and
> 'zs_handle', which may contribute to fragmentation in slab memory.
>
> Do you have /proc/slabinfo from a good and a bad run by any chance?
>
> Also, could you check if the attached patch helps? It makes sure that
> even when we use multiple zsmalloc zpools, we will use a single slab
> cache of each type.
As for reducing slab fragmentation/footprint, I would also recommend these
changes to .config:
CONFIG_SLAB_MERGE_DEFAULT=y - this will unify the separate zpool caches as
well (but the patch still makes sense), but also many others
CONFIG_RANDOM_KMALLOC_CACHES=n - no 16 separate copies of kmalloc caches
although the slabinfo output doesn't seem to show
CONFIG_RANDOM_KMALLOC_CACHES in action, weirdly. It was enabled in the
config attached to the first mail.
Both these changes mean giving up some mitigation against potentai
lvulnerabilities. But it's not perfect anyway and the memory seems really
tight here.
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-04 20:52 ` Vlastimil Babka (SUSE)
@ 2024-06-04 20:55 ` Yosry Ahmed
0 siblings, 0 replies; 45+ messages in thread
From: Yosry Ahmed @ 2024-06-04 20:55 UTC (permalink / raw)
To: Vlastimil Babka (SUSE)
Cc: Erhard Furtner, Yu Zhao, linux-mm, linux-kernel, linuxppc-dev
On Tue, Jun 4, 2024 at 1:52 PM Vlastimil Babka (SUSE) <vbabka@kernel.org> wrote:
>
> On 6/4/24 1:24 AM, Yosry Ahmed wrote:
> > On Mon, Jun 3, 2024 at 3:13 PM Erhard Furtner <erhard_f@mailbox.org> wrote:
> >>
> >> On Sun, 2 Jun 2024 20:03:32 +0200
> >> Erhard Furtner <erhard_f@mailbox.org> wrote:
> >>
> >> > On Sat, 1 Jun 2024 00:01:48 -0600
> >> > Yu Zhao <yuzhao@google.com> wrote:
> >> >
> >> > > The OOM kills on both kernel versions seem to be reasonable to me.
> >> > >
> >> > > Your system has 2GB memory and it uses zswap with zsmalloc (which is
> >> > > good since it can allocate from the highmem zone) and zstd/lzo (which
> >> > > doesn't matter much). Somehow -- I couldn't figure out why -- it
> >> > > splits the 2GB into a 0.25GB DMA zone and a 1.75GB highmem zone:
> >> > >
> >> > > [ 0.000000] Zone ranges:
> >> > > [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
> >> > > [ 0.000000] Normal empty
> >> > > [ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff]
> >> > >
> >> > > The kernel can't allocate from the highmem zone -- only userspace and
> >> > > zsmalloc can. OOM kills were due to the low memory conditions in the
> >> > > DMA zone where the kernel itself failed to allocate from.
> >> > >
> >> > > Do you know a kernel version that doesn't have OOM kills while running
> >> > > the same workload? If so, could you send that .config to me? If not,
> >> > > could you try disabling CONFIG_HIGHMEM? (It might not help but I'm out
> >> > > of ideas at the moment.)
> >>
> >> Ok, the bisect I did actually revealed something meaningful:
> >>
> >> # git bisect good
> >> b8cf32dc6e8c75b712cbf638e0fd210101c22f17 is the first bad commit
> >> commit b8cf32dc6e8c75b712cbf638e0fd210101c22f17
> >> Author: Yosry Ahmed <yosryahmed@google.com>
> >> Date: Tue Jun 20 19:46:44 2023 +0000
> >>
> >> mm: zswap: multiple zpools support
> >
> > Thanks for bisecting. Taking a look at the thread, it seems like you
> > have a very limited area of memory to allocate kernel memory from. One
> > possible reason why that commit can cause an issue is because we will
> > have multiple instances of the zsmalloc slab caches 'zspage' and
> > 'zs_handle', which may contribute to fragmentation in slab memory.
> >
> > Do you have /proc/slabinfo from a good and a bad run by any chance?
> >
> > Also, could you check if the attached patch helps? It makes sure that
> > even when we use multiple zsmalloc zpools, we will use a single slab
> > cache of each type.
>
> As for reducing slab fragmentation/footprint, I would also recommend these
> changes to .config:
>
> CONFIG_SLAB_MERGE_DEFAULT=y - this will unify the separate zpool caches as
> well (but the patch still makes sense), but also many others
> CONFIG_RANDOM_KMALLOC_CACHES=n - no 16 separate copies of kmalloc caches
Yeah, I did send that patch separately, but I think the problem here
is probably fragmentation in the zsmalloc pools themselves, not the
slab caches used by them.
>
> although the slabinfo output doesn't seem to show
> CONFIG_RANDOM_KMALLOC_CACHES in action, weirdly. It was enabled in the
> config attached to the first mail.
>
> Both these changes mean giving up some mitigation against potentai
> lvulnerabilities. But it's not perfect anyway and the memory seems really
> tight here.
I think we may be able to fix the problem here if we address the
zsmalloc fragmentation. In regards to slab caches, the patch proposed
above should avoid the replication without enabling slab cache merging
in general.
Thanks for chiming in!
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-04 18:01 ` Yosry Ahmed
@ 2024-06-04 21:00 ` Vlastimil Babka (SUSE)
2024-06-04 21:10 ` Erhard Furtner
1 sibling, 0 replies; 45+ messages in thread
From: Vlastimil Babka (SUSE) @ 2024-06-04 21:00 UTC (permalink / raw)
To: Yosry Ahmed, Yu Zhao
Cc: Erhard Furtner, linux-mm, linux-kernel, linuxppc-dev,
Johannes Weiner, Nhat Pham, Chengming Zhou, Sergey Senozhatsky,
Minchan Kim
On 6/4/24 8:01 PM, Yosry Ahmed wrote:
> On Tue, Jun 4, 2024 at 10:54 AM Yu Zhao <yuzhao@google.com> wrote:
>> There was a lot of user memory in the DMA zone. So at a point the
>> highmem zone was full and allocation fallback happened.
>>
>> The problem with zone fallback is that recent allocations go into
>> lower zones, meaning they are further back on the LRU list. This
>> applies to both user memory and zsmalloc memory -- the latter has a
>> writeback LRU. On top of this, neither the zswap shrinker nor the
>> zsmalloc shrinker (compaction) is zone aware. So page reclaim might
>> have trouble hitting the right target zone.
>
> I see what you mean. In this case, yeah I think the internal
> fragmentation in the zsmalloc pools may be the reason behind the
> problem.
>
> How many CPUs does this machine have? I am wondering if 32 can be an
> overkill for small machines, perhaps the number of pools should be
> max(nr_cpus, 32)?
>
> Alternatively, the number of pools should scale with the memory size
> in some way, such that we only increase fragmentation when it's
> tolerable.
Sounds like a good idea to me, maybe a combination of both. No point in
trying to scale if there's no benefit and only downside of more memory
consumption.
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-04 18:01 ` Yosry Ahmed
2024-06-04 21:00 ` Vlastimil Babka (SUSE)
@ 2024-06-04 21:10 ` Erhard Furtner
2024-06-05 3:03 ` Yosry Ahmed
1 sibling, 1 reply; 45+ messages in thread
From: Erhard Furtner @ 2024-06-04 21:10 UTC (permalink / raw)
To: Yosry Ahmed
Cc: Yu Zhao, linux-mm, linux-kernel, linuxppc-dev, Johannes Weiner,
Nhat Pham, Chengming Zhou, Sergey Senozhatsky, Minchan Kim
On Tue, 4 Jun 2024 11:01:39 -0700
Yosry Ahmed <yosryahmed@google.com> wrote:
> How many CPUs does this machine have? I am wondering if 32 can be an
> overkill for small machines, perhaps the number of pools should be
> max(nr_cpus, 32)?
This PowerMac G4 DP got 2 CPUs. Not much for a desktop machine by todays standards but some SoCs have less. ;)
# lscpu
Architecture: ppc
CPU op-mode(s): 32-bit
Byte Order: Big Endian
CPU(s): 2
On-line CPU(s) list: 0,1
Model name: 7455, altivec supported
Model: 3.3 (pvr 8001 0303)
Thread(s) per core: 1
Core(s) per socket: 1
Socket(s): 2
BogoMIPS: 83.78
Caches (sum of all):
L1d: 64 KiB (2 instances)
L1i: 64 KiB (2 instances)
L2: 512 KiB (2 instances)
L3: 4 MiB (2 instances)
Regards,
Erhard
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-04 17:18 ` Yu Zhao
2024-06-04 17:34 ` Yosry Ahmed
@ 2024-06-04 22:17 ` Erhard Furtner
1 sibling, 0 replies; 45+ messages in thread
From: Erhard Furtner @ 2024-06-04 22:17 UTC (permalink / raw)
To: Yu Zhao
Cc: linux-mm, linux-kernel, linuxppc-dev, Johannes Weiner, Nhat Pham,
Chengming Zhou, Sergey Senozhatsky, Minchan Kim, Yosry Ahmed
On Tue, 4 Jun 2024 11:18:25 -0600
Yu Zhao <yuzhao@google.com> wrote:
> Hi Erhard,
>
> If it's not too much trouble, could you "grep nr_zspages /proc/vmstat"
> on kernels before and after the bad commit? It'd be great if you could
> run the grep command right before the OOM kills.
>
> The overall internal fragmentation of multiple zsmalloc pools might be
> higher than a single one. I suspect this might be the cause.
>
> Thank you.
I used watch -n1 'grep nr_zspages /proc/vmstat' to get the readings and repeated this 3 times to check whether the reported values differ much.
Bad commit was b8cf32dc6e8c75b712cbf638e0fd210101c22f17 "mm: zswap: multiple zpools support", next commit in git log after the bad one would be 42c06a0e8ebe95b81e5fb41c6556ff22d9255b0c "mm: kill frontswap".
With this kernel I got 2440, 2337, 3245 as nr_zspages and the kswapd0: page allocation error.
Commit in git log before the bad one would be bfaa4a0ce1bbc1b2b67de7e4c2e1679495f7b905 "scsi: gvp11: Remove unused
gvp11_setup() function".
With this kernel I got 25537, 11321, 16087 as nr_zspages and the OOM reaper.
Tomorrow I could also check the .config changes Vlastimil suggested (CONFIG_SLAB_MERGE_DEFAULT=y, no CONFIG_RANDOM_KMALLOC_CACHES) and report back if that's of interest.
Regards,
Erhard
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-04 21:10 ` Erhard Furtner
@ 2024-06-05 3:03 ` Yosry Ahmed
2024-06-05 23:04 ` Erhard Furtner
0 siblings, 1 reply; 45+ messages in thread
From: Yosry Ahmed @ 2024-06-05 3:03 UTC (permalink / raw)
To: Erhard Furtner
Cc: Yu Zhao, linux-mm, linux-kernel, linuxppc-dev, Johannes Weiner,
Nhat Pham, Chengming Zhou, Sergey Senozhatsky, Minchan Kim
[-- Attachment #1: Type: text/plain, Size: 1196 bytes --]
On Tue, Jun 4, 2024 at 2:10 PM Erhard Furtner <erhard_f@mailbox.org> wrote:
>
> On Tue, 4 Jun 2024 11:01:39 -0700
> Yosry Ahmed <yosryahmed@google.com> wrote:
>
> > How many CPUs does this machine have? I am wondering if 32 can be an
> > overkill for small machines, perhaps the number of pools should be
> > max(nr_cpus, 32)?
>
> This PowerMac G4 DP got 2 CPUs. Not much for a desktop machine by todays standards but some SoCs have less. ;)
>
> # lscpu
> Architecture: ppc
> CPU op-mode(s): 32-bit
> Byte Order: Big Endian
> CPU(s): 2
> On-line CPU(s) list: 0,1
> Model name: 7455, altivec supported
> Model: 3.3 (pvr 8001 0303)
> Thread(s) per core: 1
> Core(s) per socket: 1
> Socket(s): 2
> BogoMIPS: 83.78
> Caches (sum of all):
> L1d: 64 KiB (2 instances)
> L1i: 64 KiB (2 instances)
> L2: 512 KiB (2 instances)
> L3: 4 MiB (2 instances)
>
> Regards,
> Erhard
Could you check if the attached patch helps? It basically changes the
number of zpools from 32 to min(32, nr_cpus).
[-- Attachment #2: 0001-mm-zswap-do-not-scale-the-number-of-zpools-unnecessa.patch --]
[-- Type: application/octet-stream, Size: 3935 bytes --]
From eb2baf6f3497936ec56fe17e22af5b5add624371 Mon Sep 17 00:00:00 2001
From: Yosry Ahmed <yosryahmed@google.com>
Date: Wed, 5 Jun 2024 02:58:11 +0000
Subject: [PATCH] mm: zswap: do not scale the number of zpools unnecessarily
Zswap allocates several zpools per zswap pool for scalability. It
currently allocates 32 zpools, an empirically determined magic number.
For small machines that has less than 32 CPUs, this doesn't make much
sense. Allocating more zpools than CPUs will not significantly increase
scalability, but it may increase internal fragmentation due to spreading
of compressed pages among different zpools.
determined at boot as the smaller of 32 and the number of CPUs.
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
---
mm/zswap.c | 35 ++++++++++++++++++++++++++---------
1 file changed, 26 insertions(+), 9 deletions(-)
diff --git a/mm/zswap.c b/mm/zswap.c
index a50e2986cd2fa..9c4a6d309b23c 100644
--- a/mm/zswap.c
+++ b/mm/zswap.c
@@ -123,8 +123,8 @@ static unsigned int zswap_accept_thr_percent = 90; /* of max pool size */
module_param_named(accept_threshold_percent, zswap_accept_thr_percent,
uint, 0644);
-/* Number of zpools in zswap_pool (empirically determined for scalability) */
-#define ZSWAP_NR_ZPOOLS 32
+/* Number of zpools in zswap_pool */
+static unsigned int nr_zswap_zpools __ro_after_init;
/* Enable/disable memory pressure-based shrinker. */
static bool zswap_shrinker_enabled = IS_ENABLED(
@@ -156,7 +156,7 @@ struct crypto_acomp_ctx {
* needs to be verified that it's still valid in the tree.
*/
struct zswap_pool {
- struct zpool *zpools[ZSWAP_NR_ZPOOLS];
+ struct zpool **zpools;
struct crypto_acomp_ctx __percpu *acomp_ctx;
struct percpu_ref ref;
struct list_head list;
@@ -268,7 +268,14 @@ static struct zswap_pool *zswap_pool_create(char *type, char *compressor)
if (!pool)
return NULL;
- for (i = 0; i < ZSWAP_NR_ZPOOLS; i++) {
+ pool->zpools = kcalloc(nr_zswap_zpools, sizeof(pool->zpools[0]),
+ GFP_KERNEL);
+ if (!pool->zpools) {
+ pr_err("zpools alloc failed\n");
+ goto error;
+ }
+
+ for (i = 0; i < nr_zswap_zpools; i++) {
/* unique name for each pool specifically required by zsmalloc */
snprintf(name, 38, "zswap%x",
atomic_inc_return(&zswap_pools_count));
@@ -312,8 +319,11 @@ static struct zswap_pool *zswap_pool_create(char *type, char *compressor)
error:
if (pool->acomp_ctx)
free_percpu(pool->acomp_ctx);
- while (i--)
- zpool_destroy_pool(pool->zpools[i]);
+ if (pool->zpools) {
+ while (i--)
+ zpool_destroy_pool(pool->zpools[i]);
+ kfree(pool->zpools);
+ }
kfree(pool);
return NULL;
}
@@ -369,8 +379,9 @@ static void zswap_pool_destroy(struct zswap_pool *pool)
cpuhp_state_remove_instance(CPUHP_MM_ZSWP_POOL_PREPARE, &pool->node);
free_percpu(pool->acomp_ctx);
- for (i = 0; i < ZSWAP_NR_ZPOOLS; i++)
+ for (i = 0; i < nr_zswap_zpools; i++)
zpool_destroy_pool(pool->zpools[i]);
+ kfree(pool->zpools);
kfree(pool);
}
@@ -496,7 +507,7 @@ unsigned long zswap_total_pages(void)
list_for_each_entry_rcu(pool, &zswap_pools, list) {
int i;
- for (i = 0; i < ZSWAP_NR_ZPOOLS; i++)
+ for (i = 0; i < nr_zswap_zpools; i++)
total += zpool_get_total_pages(pool->zpools[i]);
}
rcu_read_unlock();
@@ -805,7 +816,7 @@ static void zswap_entry_cache_free(struct zswap_entry *entry)
static struct zpool *zswap_find_zpool(struct zswap_entry *entry)
{
- return entry->pool->zpools[hash_ptr(entry, ilog2(ZSWAP_NR_ZPOOLS))];
+ return entry->pool->zpools[hash_ptr(entry, ilog2(nr_zswap_zpools))];
}
/*
@@ -1767,6 +1778,12 @@ static int zswap_setup(void)
static int __init zswap_init(void)
{
+ /*
+ * Use multiple zpools for scalability, but avoid allocating too many.
+ * 32 is an empirically determined magic number.
+ */
+ nr_zswap_zpools = min(32U, num_possible_cpus());
+
if (!zswap_enabled)
return 0;
return zswap_setup();
--
2.45.1.288.g0e0cd299f1-goog
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-05 3:03 ` Yosry Ahmed
@ 2024-06-05 23:04 ` Erhard Furtner
2024-06-05 23:41 ` Yosry Ahmed
0 siblings, 1 reply; 45+ messages in thread
From: Erhard Furtner @ 2024-06-05 23:04 UTC (permalink / raw)
To: Yosry Ahmed
Cc: Yu Zhao, linux-mm, linux-kernel, linuxppc-dev, Johannes Weiner,
Nhat Pham, Chengming Zhou, Sergey Senozhatsky, Minchan Kim
[-- Attachment #1: Type: text/plain, Size: 828 bytes --]
On Tue, 4 Jun 2024 20:03:27 -0700
Yosry Ahmed <yosryahmed@google.com> wrote:
> Could you check if the attached patch helps? It basically changes the
> number of zpools from 32 to min(32, nr_cpus).
Thanks! The patch does not fix the issue but it helps.
Means I still get to see the 'kswapd0: page allocation failure' in the dmesg, a 'stress-ng-vm: page allocation failure' later on, another kswapd0 error later on, etc. _but_ the machine keeps running the workload, stays usable via VNC and I get no hard crash any longer.
Without patch kswapd0 error and hard crash (need to power-cycle) <3min. With patch several kswapd0 errors but running for 2 hrs now. I double checked this to be sure.
The patch did not apply cleanly on v6.9.3 so I applied it on v6.10-rc2. dmesg of the current v6.10-rc2 run attached.
Regards,
Erhard
[-- Attachment #2: dmesg_610-rc2_g4 --]
[-- Type: application/octet-stream, Size: 70435 bytes --]
[ 0.000000] Total memory = 2048MB; using 4096kB for hash table
[ 0.000000] Activating Kernel Userspace Access Protection
[ 0.000000] Activating Kernel Userspace Execution Prevention
[ 0.000000] Linux version 6.10.0-rc2-PMacG4-dirty (root@T1000) (gcc (Gentoo 13.2.1_p20240210 p14) 13.2.1 20240210, GNU ld (Gentoo 2.42 p3) 2.42.0) #6 SMP Wed Jun 5 23:28:05 CEST 2024
[ 0.000000] ioremap() called early from pmac_feature_init+0x254/0xa7c. Use early_ioremap() instead
[ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0x24
[ 0.000000] ioremap() called early from probe_one_macio+0x150/0x238. Use early_ioremap() instead
[ 0.000000] Found a Keylargo mac-io controller, rev: 3, mapped at 0x(ptrval)
[ 0.000000] PowerMac motherboard: PowerMac G4 Windtunnel
[ 0.000000] ioremap() called early from btext_map+0x5c/0x7c. Use early_ioremap() instead
[ 0.000000] Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
[ 0.000000] printk: legacy bootconsole [udbg0] enabled
[ 0.000000] CPU maps initialized for 1 thread per core
[ 0.000000] (thread shift is 0)
[ 0.000000] -----------------------------------------------------
[ 0.000000] phys_mem_size = 0x80000000
[ 0.000000] dcache_bsize = 0x20
[ 0.000000] icache_bsize = 0x20
[ 0.000000] cpu_features = 0x000000002514600a
[ 0.000000] possible = 0x00000000277de00a
[ 0.000000] always = 0x0000000001000000
[ 0.000000] cpu_user_features = 0x9c000001 0x00000000
[ 0.000000] mmu_features = 0x00010201
[ 0.000000] Hash_size = 0x400000
[ 0.000000] Hash_mask = 0xffff
[ 0.000000] -----------------------------------------------------
[ 0.000000] ioremap() called early from pmac_setup_arch+0xd0/0x228. Use early_ioremap() instead
[ 0.000000] ioremap() called early from find_via_pmu+0x220/0x288. Use early_ioremap() instead
[ 0.000000] ioremap() called early from find_via_pmu+0xd4/0x288. Use early_ioremap() instead
[ 0.000000] via-pmu: Server Mode is disabled
[ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c
[ 0.000000] ioremap() called early from pmac_nvram_init+0x284/0x518. Use early_ioremap() instead
[ 0.000000] nvram: Checking bank 0...
[ 0.000000] nvram: gen0=3427, gen1=3428
[ 0.000000] nvram: Active bank is: 1
[ 0.000000] nvram: OF partition at 0x410
[ 0.000000] nvram: XP partition at 0x1020
[ 0.000000] nvram: NR partition at 0x1120
[ 0.000000] Top of RAM: 0x80000000, Total RAM: 0x80000000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
[ 0.000000] Normal empty
[ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] percpu: Embedded 14 pages/cpu s28448 r8192 d20704 u57344
[ 0.000000] pcpu-alloc: s28448 r8192 d20704 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Kernel command line: ro root=/dev/sda5 slub_debug=FZP page_poison=1 netconsole=6666@192.168.2.8/eth0,6666@192.168.2.3/A8:A1:59:16:4F:EA debug
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 524288
[ 0.000000] mem auto-init: stack:all(pattern), heap alloc:off, heap free:off, mlocked free:off
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xffbbf000..0xfffff000 : fixmap
[ 0.000000] * 0xff400000..0xff800000 : highmem PTEs
[ 0.000000] * 0xff115000..0xff400000 : early ioremap
[ 0.000000] * 0xf1000000..0xff115000 : vmalloc & ioremap
[ 0.000000] * 0xb0000000..0xc0000000 : modules
[ 0.000000] Memory: 2059124K/2097152K available (7772K kernel code, 520K rwdata, 4516K rodata, 1096K init, 278K bss, 38028K reserved, 0K cma-reserved, 1310720K highmem)
[ 0.000000] **********************************************************
[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.000000] ** **
[ 0.000000] ** This system shows unhashed kernel memory addresses **
[ 0.000000] ** via the console, logs, and other interfaces. This **
[ 0.000000] ** might reduce the security of your system. **
[ 0.000000] ** **
[ 0.000000] ** If you see this message and you are not debugging **
[ 0.000000] ** the kernel, report this immediately to your system **
[ 0.000000] ** administrator! **
[ 0.000000] ** **
[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.000000] **********************************************************
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
[ 0.000000] mpic: Resetting
[ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 2 CPUs
[ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f
[ 0.000000] mpic: Initializing for 64 sources
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] time_init: decrementer frequency = 41.658765 MHz
[ 0.000000] time_init: processor frequency = 1416.666661 MHz
[ 0.000006] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x99b97f1da, max_idle_ns: 440795202966 ns
[ 0.000556] clocksource: timebase mult[18012a56] shift[24] registered
[ 0.001052] clockevent: decrementer mult[aaa2619] shift[32] cpu[0]
[ 0.002091] Console: colour dummy device 80x25
[ 0.002553] printk: legacy console [tty0] enabled
[ 0.003013] printk: legacy bootconsole [udbg0] disabled
[ 0.003516] pid_max: default: 32768 minimum: 301
[ 0.006210] LSM: initializing lsm=capability,yama
[ 0.006248] Yama: becoming mindful.
[ 0.006944] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.006992] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.012500] PowerMac SMP probe found 2 cpus
[ 0.012807] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
[ 0.012856] channel 0 bus <multibus>
[ 0.012877] channel 1 bus <multibus>
[ 0.012983] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
[ 0.013025] channel 0 bus <multibus>
[ 0.013079] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c
[ 0.013116] channel 1 bus <multibus>
[ 0.013135] channel 2 bus <multibus>
[ 0.013160] pmf: no parser for command 17 !
[ 0.013224] Processor timebase sync using GPIO 0x73
[ 0.013237] mpic: requesting IPIs...
[ 0.013335] CPU0: L2CR is 80000000
[ 0.013348] CPU0: L3CR is 9c030000
[ 0.014968] MPC7450 family performance monitor hardware support registered
[ 0.015179] rcu: Hierarchical SRCU implementation.
[ 0.015204] rcu: Max phase no-delay instances is 1000.
[ 0.016085] smp: Bringing up secondary CPUs ...
[83973668.600483] CPU1: L2CR was 0
[83973668.600540] CPU1: L2CR set to 80000000
[83973668.600546] CPU1: L3CR was 0
[83973668.600692] CPU1: L3CR set to 9c030000
[ 0.019342] smp: Brought up 1 node, 2 CPUs
[ 0.021709] devtmpfs: initialized
[ 0.022606] Duplicate name in PowerPC,G4@0, renamed to "l2-cache#1"
[ 0.022734] Duplicate name in l2-cache#1, renamed to "l2-cache#1"
[ 0.023244] Duplicate name in PowerPC,G4@1, renamed to "l2-cache#1"
[ 0.023367] Duplicate name in l2-cache#1, renamed to "l2-cache#1"
[ 0.028961] Duplicate name in gpio@50, renamed to "gpio5@6f#1"
[ 0.029062] Duplicate name in gpio@50, renamed to "gpio6@70#1"
[ 0.029269] Duplicate name in gpio@50, renamed to "gpio11@75#1"
[ 0.029397] Duplicate name in gpio@50, renamed to "extint-gpio15@67#1"
[ 0.036238] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0
[ 0.036280] PCI host bridge /pci@f0000000 ranges:
[ 0.036318] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000
[ 0.036348] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
[ 0.036482] MEM 0x0000000090000000..0x00000000afffffff -> 0x0000000090000000
[ 0.036541] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0
[ 0.036564] PCI host bridge /pci@f2000000 (primary) ranges:
[ 0.036595] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000
[ 0.036624] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000
[ 0.036744] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000
[ 0.036804] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0
[ 0.036827] PCI host bridge /pci@f4000000 ranges:
[ 0.036857] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000
[ 0.036882] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000
[ 0.037088] Found NEC PD720100A USB2 chip with disabled EHCI, fixing up...
[ 0.037453] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.037550] futex hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.040853] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.046529] PCI: Probing PCI hardware
[ 0.047141] PCI host bridge to bus 0000:00
[ 0.047172] pci_bus 0000:00: root bus resource [io 0xff780000-0xfff7ffff] (bus address [0x0000-0x7fffff])
[ 0.047203] pci_bus 0000:00: root bus resource [mem 0xf1000000-0xf1ffffff]
[ 0.047224] pci_bus 0000:00: root bus resource [mem 0x90000000-0xafffffff]
[ 0.047249] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.047270] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.047765] pci 0000:00:0b.0: [106b:0034] type 00 class 0x060000 conventional PCI endpoint
[ 0.048427] pci 0000:00:10.0: [1002:4150] type 00 class 0x030000 conventional PCI endpoint
[ 0.048474] pci 0000:00:10.0: BAR 0 [mem 0xa0000000-0xafffffff pref]
[ 0.048500] pci 0000:00:10.0: BAR 1 [io 0xff780400-0xff7804ff]
[ 0.048524] pci 0000:00:10.0: BAR 2 [mem 0x90000000-0x9000ffff]
[ 0.048564] pci 0000:00:10.0: ROM [mem 0x90020000-0x9003ffff pref]
[ 0.048621] pci 0000:00:10.0: supports D1 D2
[ 0.049497] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.050611] OF: /pci@f2000000/mac-io@17/gpio@50/gpio5@6f: could not find phandle 1751474532
[ 0.050688] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio15@67: could not find phandle 1751474532
[ 0.050768] OF: /pci@f2000000/mac-io@17/gpio@50/gpio6@70: could not find phandle 1634562093
[ 0.050840] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio16@68: could not find phandle 1936745825
[ 0.050922] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio14@66: could not find phandle 1818848869
[ 0.051001] OF: /pci@f2000000/mac-io@17/gpio@50/gpio12@76: could not find phandle 1835103092
[ 0.051069] OF: /pci@f2000000/mac-io@17/gpio@50/gpio11@75: could not find phandle 1635083369
[ 0.051133] OF: /pci@f2000000/mac-io@17/gpio@50/gpio5@6f: could not find phandle 1751474532
[ 0.051196] OF: /pci@f2000000/mac-io@17/gpio@50/gpio6@70: could not find phandle 1634562093
[ 0.051260] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio4@5c: could not find phandle 1818848869
[ 0.051339] OF: /pci@f2000000/mac-io@17/gpio@50/gpio11@75: could not find phandle 1635083369
[ 0.051404] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio15@67: could not find phandle 1751474532
[ 0.052795] pci_bus 0001:00: Fixed dependency cycle(s) with /pci@f2000000/mac-io@17/interrupt-controller@40000
[ 0.052911] PCI host bridge to bus 0001:00
[ 0.052930] pci_bus 0001:00: root bus resource [io 0x0000-0x7fffff]
[ 0.052952] pci_bus 0001:00: root bus resource [mem 0xf3000000-0xf3ffffff]
[ 0.052973] pci_bus 0001:00: root bus resource [mem 0x80000000-0x8fffffff]
[ 0.052996] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.053016] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.053478] pci 0001:00:0b.0: [106b:0035] type 00 class 0x060000 conventional PCI endpoint
[ 0.054064] pci 0001:00:12.0: [1033:0035] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.054109] pci 0001:00:12.0: BAR 0 [mem 0x8008c000-0x8008cfff]
[ 0.054189] pci 0001:00:12.0: supports D1 D2
[ 0.054205] pci 0001:00:12.0: PME# supported from D0 D1 D2 D3hot
[ 0.054662] pci 0001:00:12.1: [1033:0035] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.054705] pci 0001:00:12.1: BAR 0 [mem 0x8008b000-0x8008bfff]
[ 0.054783] pci 0001:00:12.1: supports D1 D2
[ 0.054799] pci 0001:00:12.1: PME# supported from D0 D1 D2 D3hot
[ 0.055119] pci 0001:00:12.2: [1033:00e0] type 00 class 0x0c0320 conventional PCI endpoint
[ 0.055160] pci 0001:00:12.2: BAR 0 [mem 0x80081000-0x800810ff]
[ 0.055237] pci 0001:00:12.2: supports D1 D2
[ 0.055253] pci 0001:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.055598] pci 0001:00:13.0: [1095:3112] type 00 class 0x018000 conventional PCI endpoint
[ 0.055641] pci 0001:00:13.0: BAR 0 [io 0x0460-0x0467]
[ 0.055664] pci 0001:00:13.0: BAR 1 [io 0x0450-0x0453]
[ 0.055686] pci 0001:00:13.0: BAR 2 [io 0x0440-0x0447]
[ 0.055708] pci 0001:00:13.0: BAR 3 [io 0x0430-0x0433]
[ 0.055730] pci 0001:00:13.0: BAR 4 [io 0x0420-0x042f]
[ 0.055752] pci 0001:00:13.0: BAR 5 [mem 0x80082000-0x800821ff]
[ 0.055775] pci 0001:00:13.0: ROM [mem 0x80100000-0x8017ffff pref]
[ 0.055826] pci 0001:00:13.0: supports D1 D2
[ 0.056198] pci 0001:00:15.0: [9710:9865] type 00 class 0x070002 conventional PCI endpoint
[ 0.056242] pci 0001:00:15.0: BAR 0 [io 0x0410-0x0417]
[ 0.056265] pci 0001:00:15.0: BAR 1 [mem 0x8008a000-0x8008afff]
[ 0.056298] pci 0001:00:15.0: BAR 4 [mem 0x80089000-0x80089fff]
[ 0.056361] pci 0001:00:15.0: supports D1 D2
[ 0.056378] pci 0001:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.056704] pci 0001:00:15.1: [9710:9865] type 00 class 0x070002 conventional PCI endpoint
[ 0.056746] pci 0001:00:15.1: BAR 0 [io 0x0400-0x0407]
[ 0.056769] pci 0001:00:15.1: BAR 1 [mem 0x80088000-0x80088fff]
[ 0.056802] pci 0001:00:15.1: BAR 4 [mem 0x80087000-0x80087fff]
[ 0.056862] pci 0001:00:15.1: supports D1 D2
[ 0.056879] pci 0001:00:15.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.057330] pci 0001:00:15.2: [ffff:9865] type 00 class 0x070103 conventional PCI endpoint
[ 0.057373] pci 0001:00:15.2: BAR 0 [io 0x0000-0x0007]
[ 0.057395] pci 0001:00:15.2: BAR 1 [io 0x0000-0x0007]
[ 0.057418] pci 0001:00:15.2: BAR 2 [mem 0x00000000-0x00000fff]
[ 0.057445] pci 0001:00:15.2: BAR 4 [mem 0x00000000-0x00000fff]
[ 0.057507] pci 0001:00:15.2: supports D1 D2
[ 0.057523] pci 0001:00:15.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.057835] pci 0001:00:16.0: [14e4:4320] type 00 class 0x028000 conventional PCI endpoint
[ 0.057876] pci 0001:00:16.0: BAR 0 [mem 0x8008e000-0x8008ffff]
[ 0.057952] pci 0001:00:16.0: supports D1 D2
[ 0.057968] pci 0001:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.058273] pci 0001:00:17.0: [106b:0022] type 00 class 0xff0000 conventional PCI endpoint
[ 0.058313] pci 0001:00:17.0: BAR 0 [mem 0x80000000-0x8007ffff]
[ 0.058798] pci 0001:00:18.0: [106b:0019] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.058841] pci 0001:00:18.0: BAR 0 [mem 0x80086000-0x80086fff]
[ 0.059183] pci 0001:00:19.0: [106b:0019] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.059224] pci 0001:00:19.0: BAR 0 [mem 0x80085000-0x80085fff]
[ 0.059746] pci 0001:00:1b.0: [1033:0035] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.059791] pci 0001:00:1b.0: BAR 0 [mem 0x80084000-0x80084fff]
[ 0.059870] pci 0001:00:1b.0: supports D1 D2
[ 0.059886] pci 0001:00:1b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.060225] pci 0001:00:1b.1: [1033:0035] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.060266] pci 0001:00:1b.1: BAR 0 [mem 0x80083000-0x80083fff]
[ 0.060344] pci 0001:00:1b.1: supports D1 D2
[ 0.060360] pci 0001:00:1b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.060683] pci 0001:00:1b.2: [1033:00e0] type 00 class 0x0c0320 conventional PCI endpoint
[ 0.060724] pci 0001:00:1b.2: BAR 0 [mem 0x80080000-0x800800ff]
[ 0.060801] pci 0001:00:1b.2: supports D1 D2
[ 0.060817] pci 0001:00:1b.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.061239] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.062957] PCI host bridge to bus 0002:00
[ 0.062989] pci_bus 0002:00: root bus resource [io 0x880000-0x107ffff] (bus address [0x0000-0x7fffff])
[ 0.063017] pci_bus 0002:00: root bus resource [mem 0xf5000000-0xf5ffffff]
[ 0.063040] pci_bus 0002:00: root bus resource [bus 00-ff]
[ 0.063060] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.063525] pci 0002:00:0b.0: [106b:0036] type 00 class 0x060000 conventional PCI endpoint
[ 0.064010] pci 0002:00:0d.0: [106b:0033] type 00 class 0xff0000 conventional PCI endpoint
[ 0.064052] pci 0002:00:0d.0: BAR 0 [mem 0xf5004000-0xf5007fff]
[ 0.064529] pci 0002:00:0e.0: [106b:0031] type 00 class 0x0c0010 conventional PCI endpoint
[ 0.064572] pci 0002:00:0e.0: BAR 0 [mem 0xf5000000-0xf5000fff]
[ 0.064643] pci 0002:00:0e.0: supports D1 D2
[ 0.064659] pci 0002:00:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.065000] pci 0002:00:0f.0: [106b:0032] type 00 class 0x020000 conventional PCI endpoint
[ 0.065041] pci 0002:00:0f.0: BAR 0 [mem 0xf5200000-0xf53fffff]
[ 0.065091] pci 0002:00:0f.0: ROM [mem 0xf5100000-0xf51fffff pref]
[ 0.065964] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.066418] PCI 0000:00 Cannot reserve Legacy IO [io 0xff780000-0xff780fff]
[ 0.066453] PCI 0001:00 Cannot reserve Legacy IO [io 0x0000-0x0fff]
[ 0.066488] pci_bus 0000:00: resource 4 [io 0xff780000-0xfff7ffff]
[ 0.066508] pci_bus 0000:00: resource 5 [mem 0xf1000000-0xf1ffffff]
[ 0.066527] pci_bus 0000:00: resource 6 [mem 0x90000000-0xafffffff]
[ 0.066564] pci 0001:00:15.2: BAR 2 [mem 0xf3000000-0xf3000fff]: assigned
[ 0.066590] pci 0001:00:15.2: BAR 4 [mem 0xf3001000-0xf3001fff]: assigned
[ 0.066612] pci 0001:00:15.2: BAR 0 [io 0x1000-0x1007]: assigned
[ 0.066634] pci 0001:00:15.2: BAR 1 [io 0x1008-0x100f]: assigned
[ 0.066668] pci_bus 0001:00: resource 4 [io 0x0000-0x7fffff]
[ 0.066687] pci_bus 0001:00: resource 5 [mem 0xf3000000-0xf3ffffff]
[ 0.066706] pci_bus 0001:00: resource 6 [mem 0x80000000-0x8fffffff]
[ 0.066727] pci_bus 0002:00: resource 4 [io 0x880000-0x107ffff]
[ 0.066745] pci_bus 0002:00: resource 5 [mem 0xf5000000-0xf5ffffff]
[ 0.129013] raid6: altivecx8 gen() 3308 MB/s
[ 0.185769] raid6: altivecx4 gen() 3396 MB/s
[ 0.242528] raid6: altivecx2 gen() 3177 MB/s
[ 0.299285] raid6: altivecx1 gen() 2601 MB/s
[ 0.356095] raid6: int32x8 gen() 359 MB/s
[ 0.412831] raid6: int32x4 gen() 441 MB/s
[ 0.469580] raid6: int32x2 gen() 827 MB/s
[ 0.526321] raid6: int32x1 gen() 502 MB/s
[ 0.526337] raid6: using algorithm altivecx4 gen() 3396 MB/s
[ 0.526353] raid6: using intx1 recovery algorithm
[ 0.528598] SCSI subsystem initialized
[ 0.529107] libata version 3.00 loaded.
[ 0.529373] usbcore: registered new interface driver usbfs
[ 0.529539] usbcore: registered new interface driver hub
[ 0.529668] usbcore: registered new device driver usb
[ 0.532317] pci 0000:00:10.0: vgaarb: setting as boot VGA device
[ 0.532353] pci 0000:00:10.0: vgaarb: bridge control possible
[ 0.532370] pci 0000:00:10.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
[ 0.532419] vgaarb: loaded
[ 0.532720] clocksource: Switched to clocksource timebase
[ 0.554962] NET: Registered PF_INET protocol family
[ 0.555639] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.558851] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 10240 bytes, linear)
[ 0.559748] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.560416] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.562183] TCP bind hash table entries: 8192 (order: 6, 327680 bytes, linear)
[ 0.562757] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.563396] UDP hash table entries: 512 (order: 2, 24576 bytes, linear)
[ 0.563575] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes, linear)
[ 0.564238] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.564543] pci 0001:00:12.0: enabling device (0000 -> 0002)
[ 0.564635] pci 0001:00:12.1: enabling device (0000 -> 0002)
[ 0.564685] pci 0001:00:12.2: enabling device (0004 -> 0006)
[ 0.564763] Apple USB OHCI 0001:00:18.0 disabled by firmware
[ 0.564782] pci 0001:00:18.0: Can't enable PCI device, BIOS handoff failed.
[ 0.564805] Apple USB OHCI 0001:00:19.0 disabled by firmware
[ 0.564821] pci 0001:00:19.0: Can't enable PCI device, BIOS handoff failed.
[ 0.564848] pci 0001:00:1b.0: enabling device (0000 -> 0002)
[ 0.564896] pci 0001:00:1b.1: enabling device (0000 -> 0002)
[ 0.564942] pci 0001:00:1b.2: enabling device (0004 -> 0006)
[ 0.565003] pci 0002:00:0f.0: CLS mismatch (32 != 1020), using 32 bytes
[ 0.566019] Thermal assist unit not available
[ 0.568308] Initialise system trusted keyrings
[ 0.568681] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 0.581523] 9p: Installing v9fs 9p2000 file system support
[ 0.582244] NET: Registered PF_ALG protocol family
[ 0.582325] xor: measuring software checksum speed
[ 0.590903] 8regs : 1152 MB/sec
[ 0.600999] 8regs_prefetch : 975 MB/sec
[ 0.609111] 32regs : 1216 MB/sec
[ 0.618337] 32regs_prefetch : 1067 MB/sec
[ 0.620452] altivec : 4700 MB/sec
[ 0.620468] xor: using function: altivec (4700 MB/sec)
[ 0.620498] Key type asymmetric registered
[ 0.620513] Asymmetric key parser 'x509' registered
[ 0.626606] bounce: pool size: 64 pages
[ 0.627019] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.627291] io scheduler bfq registered
[ 0.632144] Using unsupported 1920x1080 (null) at a0008000, depth=8, pitch=2048
[ 0.673838] Console: switching to colour frame buffer device 240x67
[ 0.714187] fb0: Open Firmware frame buffer device on /pci@f0000000/ATY,AlteracParent@10/ATY,Alterac_A@0
[ 0.715074] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.718205] serial 0001:00:15.0: enabling device (0004 -> 0007)
[ 0.719344] 0001:00:15.0: ttyS0 at I/O 0x410 (irq = 58, base_baud = 115200) is a 16550A
[ 0.720056] serial 0001:00:15.1: enabling device (0004 -> 0007)
[ 0.721140] 0001:00:15.1: ttyS1 at I/O 0x400 (irq = 58, base_baud = 115200) is a 16550A
[ 0.723369] MacIO PCI driver attached to Keylargo chipset
[ 0.729801] sata_sil 0001:00:13.0: version 2.4
[ 0.730155] sata_sil 0001:00:13.0: enabling device (0004 -> 0007)
[ 0.732604] scsi host0: sata_sil
[ 0.734052] scsi host1: sata_sil
[ 0.734626] ata1: SATA max UDMA/100 mmio m512@0x80082000 tf 0x80082080 irq 53 lpm-pol 0
[ 0.734881] ata2: SATA max UDMA/100 mmio m512@0x80082000 tf 0x800820c0 irq 53 lpm-pol 0
[ 0.735376] pata-pci-macio 0002:00:0d.0: enabling device (0004 -> 0006)
[ 0.752723] pata-pci-macio 0002:00:0d.0: Activating pata-macio chipset UniNorth ATA-6, Apple bus ID 3
[ 0.754718] scsi host2: pata_macio
[ 0.755222] ata3: PATA max UDMA/100 irq 39 lpm-pol 0
[ 1.049097] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1.050037] ata1.00: ATA-9: SanDisk SSD PLUS 240GB, UF4500RL, max UDMA/133
[ 1.050261] ata1.00: 468877312 sectors, multi 1: LBA48 NCQ (depth 0/32)
[ 1.051996] ata1.00: Features: Dev-Sleep
[ 1.076224] ata1.00: configured for UDMA/100
[ 1.077128] scsi 0:0:0:0: Direct-Access ATA SanDisk SSD PLUS 00RL PQ: 0 ANSI: 5
[ 1.079437] sd 0:0:0:0: [sda] 468877312 512-byte logical blocks: (240 GB/224 GiB)
[ 1.079781] sd 0:0:0:0: [sda] Write Protect is off
[ 1.079945] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.080190] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.080610] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 1.084027] sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[ 1.086383] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.502743] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1.505302] ata2.00: ATA-9: WDC WD5000LPLX-60ZNTT1, 02.01A02, max UDMA/133
[ 1.505523] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 1.508211] ata2.00: configured for UDMA/100
[ 1.508963] scsi 1:0:0:0: Direct-Access ATA WDC WD5000LPLX-6 1A02 PQ: 0 ANSI: 5
[ 1.511302] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.511550] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1.511771] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.511934] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.512171] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.512597] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
[ 1.792745] pata-macio 0.0001f000:ata-4: Activating pata-macio chipset KeyLargo ATA-4, Apple bus ID 2
[ 1.803634] scsi host3: pata_macio
[ 1.813239] ata4: PATA max UDMA/66 irq 19 lpm-pol 0
[ 1.978653] ata4.00: CFA: DeLOCK 54143 512MB, 100511E, max UDMA/66
[ 1.988113] ata4.00: 1009008 sectors, multi 1: LBA
[ 2.287469] sdb: [mac] sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8
[ 2.299343] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.309340] scsi 3:0:0:0: Direct-Access ATA DeLOCK 54143 512 11E PQ: 0 ANSI: 5
[ 2.320818] sd 3:0:0:0: [sdc] 1009008 512-byte logical blocks: (517 MB/493 MiB)
[ 2.330298] sd 3:0:0:0: [sdc] Write Protect is off
[ 2.339619] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.348978] sd 3:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.358641] sd 3:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
[ 2.370992] sdc: [mac] sdc1 sdc2 sdc3 sdc4 sdc5 sdc6
[ 2.382288] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 2.859405] pata-macio 0.00020000:ata-3: Activating pata-macio chipset KeyLargo ATA-3, Apple bus ID 0
[ 2.870957] scsi host4: pata_macio
[ 2.881217] ata5: PATA max MWDMA2 irq 20 lpm-pol 0
[ 2.891485] sungem.c:v1.0 David S. Miller <davem@redhat.com>
[ 2.903025] gem 0002:00:0f.0 eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0a:95:9c:76:3a
[ 2.913711] ehci-pci 0001:00:12.2: EHCI Host Controller
[ 2.924221] ehci-pci 0001:00:12.2: new USB bus registered, assigned bus number 1
[ 2.929556] rtc-generic rtc-generic: registered as rtc0
[ 2.934535] ehci-pci 0001:00:12.2: irq 52, io mem 0x80081000
[ 2.944776] PowerMac i2c bus pmu 2 registered
[ 2.964881] PowerMac i2c bus pmu 1 registered
[ 2.966054] ehci-pci 0001:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.975204] PowerMac i2c bus mac-io 0 registered
[ 2.984697] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10
[ 2.994233] i2c i2c-2: No i2c address for /pci@f2000000/mac-io@17/i2c@18000/i2c-modem
[ 3.003816] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.013921] PowerMac i2c bus uni-n 1 registered
[ 3.023390] usb usb1: Product: EHCI Host Controller
[ 3.033091] i2c i2c-3: i2c-powermac: modalias failure on /uni-n@f8000000/i2c@f8001000/cereal@1c0
[ 3.042769] usb usb1: Manufacturer: Linux 6.10.0-rc2-PMacG4-dirty ehci_hcd
[ 3.052967] PowerMac i2c bus uni-n 0 registered
[ 3.062653] usb usb1: SerialNumber: 0001:00:12.2
[ 3.071994] ata5.00: ATAPI: _NEC DVD_RW ND-3520A, 1.04, max UDMA/33
[ 3.074096] hid: raw HID events driver (C) Jiri Kosina
[ 3.083570] hub 1-0:1.0: USB hub found
[ 3.093306] usbcore: registered new interface driver usbhid
[ 3.103276] hub 1-0:1.0: 5 ports detected
[ 3.113018] usbhid: USB HID core driver
[ 3.127141] scsi 4:0:0:0: CD-ROM _NEC DVD_RW ND-3520A 1.04 PQ: 0 ANSI: 5
[ 3.134164] NET: Registered PF_INET6 protocol family
[ 3.146410] ehci-pci 0001:00:1b.2: EHCI Host Controller
[ 3.165396] Segment Routing with IPv6
[ 3.174102] ehci-pci 0001:00:1b.2: new USB bus registered, assigned bus number 2
[ 3.183532] In-situ OAM (IOAM) with IPv6
[ 3.193305] ehci-pci 0001:00:1b.2: irq 63, io mem 0x80080000
[ 3.203534] 9pnet: Installing 9P2000 support
[ 3.223434] drmem: No dynamic reconfiguration memory found
[ 3.226056] ehci-pci 0001:00:1b.2: USB 2.0 started, EHCI 1.00
[ 3.243695] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10
[ 3.250470] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 3.253728] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.274254] usb usb2: Product: EHCI Host Controller
[ 3.284311] usb usb2: Manufacturer: Linux 6.10.0-rc2-PMacG4-dirty ehci_hcd
[ 3.294430] usb usb2: SerialNumber: 0001:00:1b.2
[ 3.304530] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 3.314913] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.315696] hub 2-0:1.0: USB hub found
[ 3.335516] registered taskstats version 1
[ 3.345669] hub 2-0:1.0: 5 ports detected
[ 3.356609] Loading compiled-in X.509 certificates
[ 3.368220] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 3.398436] zswap: loaded using pool lzo/zsmalloc
[ 3.408827] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers
[ 3.419211] page_owner is disabled
[ 3.451011] Btrfs loaded, zoned=no, fsverity=no
[ 4.220908] input: PMU as /devices/virtual/input/input0
[ 4.231496] netpoll: netconsole: local port 6666
[ 4.241426] netpoll: netconsole: local IPv4 address 192.168.2.8
[ 4.251304] netpoll: netconsole: interface 'eth0'
[ 4.261078] netpoll: netconsole: remote port 6666
[ 4.270732] netpoll: netconsole: remote IPv4 address 192.168.2.3
[ 4.280371] netpoll: netconsole: remote ethernet address a8:a1:59:16:4f:ea
[ 4.290067] netpoll: netconsole: device eth0 not up yet, forcing it
[ 4.376469] sungem_phy: PHY ID: 2060e1, addr: 0
[ 4.386324] gem 0002:00:0f.0 eth0: Found BCM5421 PHY
[ 8.059723] gem 0002:00:0f.0 eth0: Link is up at 1000 Mbps, full-duplex
[ 8.069428] gem 0002:00:0f.0 eth0: Pause is enabled (rxfifo: 10240 off: 7168 on: 5632)
[ 8.080669] printk: legacy console [netcon0] enabled
[ 8.096627] netconsole: network logging started
[ 8.121957] EXT4-fs (sda5): mounted filesystem fa07e66f-b4f9-404f-85d8-487d3c097aec ro with ordered data mode. Quota mode: disabled.
[ 8.132094] VFS: Mounted root (ext4 filesystem) readonly on device 8:5.
[ 8.145481] devtmpfs: mounted
[ 8.157285] Freeing unused kernel image (initmem) memory: 1096K
[ 8.172898] Checked W+X mappings: passed, no W+X pages found
[ 8.182569] rodata_test: all tests were successful
[ 8.192168] Run /sbin/init as init process
[ 8.201675] with arguments:
[ 8.211208] /sbin/init
[ 8.220667] with environment:
[ 8.230058] HOME=/
[ 8.239286] TERM=linux
[ 12.428757] ohci-pci 0001:00:12.0: OHCI PCI host controller
[ 12.456787] ohci-pci 0001:00:12.0: new USB bus registered, assigned bus number 3
[ 12.471889] ohci-pci 0001:00:12.0: irq 52, io mem 0x8008c000
[ 12.686474] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[ 12.694521] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.702412] usb usb3: Product: OHCI PCI host controller
[ 12.710209] usb usb3: Manufacturer: Linux 6.10.0-rc2-PMacG4-dirty ohci_hcd
[ 12.718063] usb usb3: SerialNumber: 0001:00:12.0
[ 12.832664] hub 3-0:1.0: USB hub found
[ 12.856204] hub 3-0:1.0: 3 ports detected
[ 12.917891] ohci-pci 0001:00:12.1: OHCI PCI host controller
[ 12.941841] ohci-pci 0001:00:12.1: new USB bus registered, assigned bus number 4
[ 12.954867] [drm] radeon kernel modesetting enabled.
[ 12.959203] ohci-pci 0001:00:12.1: irq 52, io mem 0x8008b000
[ 12.977845] Console: switching to colour dummy device 80x25
[ 12.981852] radeon 0000:00:10.0: enabling device (0006 -> 0007)
[ 12.984903] [drm] initializing kernel modesetting (RV350 0x1002:0x4150 0x1002:0x0002 0x00).
[ 12.985000] [drm] Forcing AGP to PCI mode
[ 12.985140] radeon 0000:00:10.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0x0000
[ 13.067879] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[ 13.067958] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.068020] usb usb4: Product: OHCI PCI host controller
[ 13.068049] usb usb4: Manufacturer: Linux 6.10.0-rc2-PMacG4-dirty ohci_hcd
[ 13.068081] usb usb4: SerialNumber: 0001:00:12.1
[ 13.069322] hub 4-0:1.0: USB hub found
[ 13.069505] hub 4-0:1.0: 2 ports detected
[ 13.070759] Apple USB OHCI 0001:00:18.0 disabled by firmware
[ 13.070856] Apple USB OHCI 0001:00:19.0 disabled by firmware
[ 13.071060] ohci-pci 0001:00:1b.0: OHCI PCI host controller
[ 13.071143] ohci-pci 0001:00:1b.0: new USB bus registered, assigned bus number 5
[ 13.071557] ohci-pci 0001:00:1b.0: irq 63, io mem 0x80084000
[ 13.073258] [drm] Generation 2 PCI interface, using max accessible memory
[ 13.073349] radeon 0000:00:10.0: VRAM: 256M 0x00000000A0000000 - 0x00000000AFFFFFFF (256M used)
[ 13.073389] radeon 0000:00:10.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
[ 13.073510] [drm] Detected VRAM RAM=256M, BAR=256M
[ 13.073540] [drm] RAM width 128bits DDR
[ 13.074547] [drm] radeon: 256M of VRAM memory ready
[ 13.074621] [drm] radeon: 512M of GTT memory ready.
[ 13.074795] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 13.087656] [drm] radeon: 1 quad pipes, 1 Z pipes initialized
[ 13.087802] [drm] PCI GART of 512M enabled (table at 0x0000000003480000).
[ 13.087955] radeon 0000:00:10.0: WB enabled
[ 13.088069] radeon 0000:00:10.0: fence driver on ring 0 use gpu addr 0x0000000080000000
[ 13.100101] [drm] radeon: irq initialized.
[ 13.100320] [drm] Loading R300 Microcode
[ 13.146822] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[ 13.146945] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.146984] usb usb5: Product: OHCI PCI host controller
[ 13.147044] usb usb5: Manufacturer: Linux 6.10.0-rc2-PMacG4-dirty ohci_hcd
[ 13.147085] usb usb5: SerialNumber: 0001:00:1b.0
[ 13.154685] hub 5-0:1.0: USB hub found
[ 13.154892] hub 5-0:1.0: 3 ports detected
[ 13.162238] ohci-pci 0001:00:1b.1: OHCI PCI host controller
[ 13.162366] ohci-pci 0001:00:1b.1: new USB bus registered, assigned bus number 6
[ 13.162588] ohci-pci 0001:00:1b.1: irq 63, io mem 0x80083000
[ 13.170090] [drm] radeon: ring at 0x0000000080001000
[ 13.177840] [drm] ring test succeeded in 1 usecs
[ 13.182976] [drm] ib test succeeded in 0 usecs
[ 13.183083] stackdepot: allocating hash table of 65536 entries via kvcalloc
[ 13.198683] [drm] Radeon Display Connectors
[ 13.198757] [drm] Connector 0:
[ 13.198813] [drm] DVI-I-1
[ 13.198837] [drm] HPD2
[ 13.198861] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 13.198905] [drm] Encoders:
[ 13.198940] [drm] CRT1: INTERNAL_DAC1
[ 13.198976] [drm] DFP2: INTERNAL_DVO1
[ 13.199012] [drm] Connector 1:
[ 13.199035] [drm] DVI-I-2
[ 13.199060] [drm] HPD1
[ 13.199093] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 13.199133] [drm] Encoders:
[ 13.199166] [drm] CRT2: INTERNAL_DAC2
[ 13.199201] [drm] DFP1: INTERNAL_TMDS1
[ 13.209704] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:10.0 on minor 0
[ 13.290618] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[ 13.290713] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.290751] usb usb6: Product: OHCI PCI host controller
[ 13.290781] usb usb6: Manufacturer: Linux 6.10.0-rc2-PMacG4-dirty ohci_hcd
[ 13.290853] usb usb6: SerialNumber: 0001:00:1b.1
[ 13.320388] hub 6-0:1.0: USB hub found
[ 13.320603] hub 6-0:1.0: 2 ports detected
[ 13.403631] [drm] fb mappable at 0xA0040000
[ 13.403718] [drm] vram apper at 0xA0000000
[ 13.403744] [drm] size 8294400
[ 13.403771] [drm] fb depth is 24
[ 13.403798] [drm] pitch is 7680
[ 13.456099] Console: switching to colour frame buffer device 240x67
[ 13.506547] radeon 0000:00:10.0: [drm] fb0: radeondrmfb frame buffer device
[ 13.624355] gem 0002:00:0f.0 enP2p0s15: renamed from eth0 (while UP)
[ 13.769429] ADM1030 fan controller [@2c]
[ 13.789756] DS1775 digital thermometer [@49]
[ 13.790006] Temp: 49.1 C
[ 13.790051] Hyst: 70.0 C
[ 13.790167] OS: 75.0 C
[ 13.790301]
[ 14.870578] EXT4-fs (sda5): re-mounted fa07e66f-b4f9-404f-85d8-487d3c097aec r/w. Quota mode: disabled.
[ 14.979515] EXT4-fs (sda5): re-mounted fa07e66f-b4f9-404f-85d8-487d3c097aec r/w. Quota mode: disabled.
[ 15.477534] Adding 8388604k swap on /dev/sdb6. Priority:-2 extents:1 across:8388604k
[ 15.712359] random: crng init done
[ 15.712748] EXT4-fs (sdc5): mounting ext2 file system using the ext4 subsystem
[ 15.721596] EXT4-fs (sdc5): mounted filesystem e4e8af9e-0f0d-44f9-b983-71bf61d782de r/w without journal. Quota mode: disabled.
[ 15.722264] ext2 filesystem being mounted at /boot supports timestamps until 2038-01-19 (0x7fffffff)
[ 15.724594] BTRFS: device label tmp devid 1 transid 4947 /dev/sda6 (8:6) scanned by mount (876)
[ 15.727060] BTRFS info (device sda6): first mount of filesystem 65162d91-887e-4e48-a356-fbf7093eefb5
[ 15.727488] BTRFS info (device sda6): using xxhash64 (xxhash64-generic) checksum algorithm
[ 15.727864] BTRFS info (device sda6): using free-space-tree
[ 105.937889] kswapd0: page allocation failure: order:0, mode:0xcc0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0
[ 105.938485] CPU: 1 PID: 39 Comm: kswapd0 Not tainted 6.10.0-rc2-PMacG4-dirty #6
[ 105.938827] Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
[ 105.939110] Call Trace:
[ 105.939236] [c11ad950] [c0770a50] dump_stack_lvl+0x70/0x8c (unreliable)
[ 105.939561] [c11ad970] [c01ae6e8] warn_alloc+0x100/0x178
[ 105.939833] [c11ad9d0] [c01aead0] __alloc_pages_noprof+0x370/0x8d0
[ 105.940129] [c11ada90] [c01bc6cc] __read_swap_cache_async+0xc0/0x1cc
[ 105.940431] [c11adae0] [c01c2fa8] zswap_writeback_entry+0x50/0x154
[ 105.940727] [c11adbe0] [c01c311c] shrink_memcg_cb+0x70/0xec
[ 105.940991] [c11adc10] [c018d2cc] __list_lru_walk_one+0xa0/0x154
[ 105.941288] [c11adc70] [c018d3e4] list_lru_walk_one+0x64/0x7c
[ 105.941563] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 105.941570] cache: skbuff_small_head, object size: 416, buffer size: 480, default order: 1, min order: 0
[ 105.941578] node 0: slabs: 9, objs: 153, free: 0
[ 105.941947] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 105.941954] cache: skbuff_small_head, object size: 416, buffer size: 480, default order: 1, min order: 0
[ 105.941961] node 0: slabs: 9, objs: 153, free: 0
[ 105.942423] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 105.942429] cache: skbuff_small_head, object size: 416, buffer size: 480, default order: 1, min order: 0
[ 105.942436] node 0: slabs: 9, objs: 153, free: 0
[ 105.942694] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 105.942701] cache: skbuff_small_head, object size: 416, buffer size: 480, default order: 1, min order: 0
[ 105.942708] node 0: slabs: 9, objs: 153, free: 0
[ 105.943063] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 105.943069] cache: skbuff_small_head, object size: 416, buffer size: 480, default order: 1, min order: 0
[ 105.943076] node 0: slabs: 9, objs: 153, free: 0
[ 105.943540] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 105.943547] cache: skbuff_small_head, object size: 416, buffer size: 480, default order: 1, min order: 0
[ 105.943554] node 0: slabs: 9, objs: 153, free: 0
[ 105.943815] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 105.943821] cache: skbuff_small_head, object size: 416, buffer size: 480, default order: 1, min order: 0
[ 105.943828] node 0: slabs: 9, objs: 153, free: 0
[ 105.944177] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 105.944183] cache: skbuff_small_head, object size: 416, buffer size: 480, default order: 1, min order: 0
[ 105.944190] node 0: slabs: 9, objs: 153, free: 0
[ 105.944649] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 105.944655] cache: skbuff_small_head, object size: 416, buffer size: 480, default order: 1, min order: 0
[ 105.944662] node 0: slabs: 9, objs: 153, free: 0
[ 105.944922] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 105.944929] cache: skbuff_small_head, object size: 416, buffer size: 480, default order: 1, min order: 0
[ 105.944936] node 0: slabs: 9, objs: 153, free: 0
[ 105.951721] [c11adca0] [c01c2958] zswap_shrinker_scan+0xac/0xc4
[ 105.952011] [c11adcd0] [c01786bc] do_shrink_slab+0x18c/0x2f4
[ 105.952295] [c11add20] [c0178bc0] shrink_slab+0x174/0x260
[ 105.952557] [c11adda0] [c0174d24] shrink_one+0xbc/0x134
[ 105.952818] [c11addd0] [c01765ec] shrink_node+0x238/0x850
[ 105.953085] [c11ade50] [c0176f44] balance_pgdat+0x340/0x650
[ 105.953352] [c11adf50] [c017747c] kswapd+0x228/0x25c
[ 105.953599] [c11adfc0] [c0064738] kthread+0xe4/0xe8
[ 105.953846] [c11adff0] [c0015304] start_kernel_thread+0x10/0x14
[ 105.955304] Mem-Info:
[ 105.956080] active_anon:245389 inactive_anon:246618 isolated_anon:0
[ 105.956080] active_file:1220 inactive_file:7569 isolated_file:0
[ 105.956080] unevictable:4 dirty:0 writeback:40
[ 105.956080] slab_reclaimable:982 slab_unreclaimable:5138
[ 105.956080] mapped:4248 shmem:589 pagetables:747
[ 105.956080] sec_pagetables:0 bounce:0
[ 105.956080] kernel_misc_reclaimable:0
[ 105.956080] free:178 free_pcp:143 free_cma:0
[ 105.957812] Node 0 active_anon:981556kB inactive_anon:986472kB active_file:4880kB inactive_file:30276kB unevictable:16kB isolated(anon):0kB isolated(file):0kB mapped:16992kB dirty:0kB writeback:160kB shmem:2356kB writeback_tmp:0kB kernel_stack:1016kB pagetables:2988kB sec_pagetables:0kB all_unreclaimable? no
[ 105.959026] DMA free:284kB boost:7780kB min:11240kB low:12104kB high:12968kB reserved_highatomic:0KB active_anon:182188kB inactive_anon:523756kB active_file:316kB inactive_file:168kB unevictable:0kB writepending:328kB present:786432kB managed:749500kB mlocked:0kB bounce:0kB free_pcp:572kB local_pcp:324kB free_cma:0kB
[ 105.960283] lowmem_reserve[]: 0 0 1280 0
[ 105.960506] DMA: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 0kB
[ 105.961016] 44659 total pagecache pages
[ 105.979814] 35277 pages in swap cache
[ 105.998241] Free swap = 8194996kB
[ 106.016452] Total swap = 8388604kB
[ 106.034554] 524288 pages RAM
[ 106.052548] 327680 pages HighMem/MovableOnly
[ 106.070405] 9233 pages reserved
[ 131.441500] warn_alloc: 331 callbacks suppressed
[ 131.441529] stress-ng-vm: page allocation failure: order:0, mode:0x40cc0(GFP_KERNEL|__GFP_COMP), nodemask=(null)
[ 131.457207] slab_out_of_memory: 72 callbacks suppressed
[ 131.457217] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 131.457224] cache: kmalloc-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
[ 131.457231] kmalloc-2k debugging increased min order, use slab_debug=O to disable.
[ 131.457236] node 0: slabs: 57, objs: 285, free: 0
[ 131.473044] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 131.473054] cache: kmalloc-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
[ 131.473061] kmalloc-2k debugging increased min order, use slab_debug=O to disable.
[ 131.473065] node 0: slabs: 57, objs: 285, free: 0
[ 131.488785] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 131.488794] cache: kmalloc-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
[ 131.488801] kmalloc-2k debugging increased min order, use slab_debug=O to disable.
[ 131.488805] node 0: slabs: 57, objs: 285, free: 0
[ 131.507390] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 131.507399] cache: kmalloc-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
[ 131.507406] kmalloc-2k debugging increased min order, use slab_debug=O to disable.
[ 131.507410] node 0: slabs: 57, objs: 285, free: 0
[ 131.523562] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 131.523570] cache: kmalloc-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
[ 131.523577] kmalloc-2k debugging increased min order, use slab_debug=O to disable.
[ 131.523581] node 0: slabs: 57, objs: 285, free: 0
[ 131.539649] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 131.539658] cache: kmalloc-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
[ 131.539664] kmalloc-2k debugging increased min order, use slab_debug=O to disable.
[ 131.539668] node 0: slabs: 57, objs: 285, free: 0
[ 131.558265] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 131.558273] cache: kmalloc-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
[ 131.558279] kmalloc-2k debugging increased min order, use slab_debug=O to disable.
[ 131.558283] node 0: slabs: 57, objs: 285, free: 0
[ 131.576916] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 131.576925] cache: kmalloc-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
[ 131.576932] kmalloc-2k debugging increased min order, use slab_debug=O to disable.
[ 131.576936] node 0: slabs: 57, objs: 285, free: 0
[ 131.592991] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 131.592999] cache: kmalloc-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
[ 131.593006] kmalloc-2k debugging increased min order, use slab_debug=O to disable.
[ 131.593010] node 0: slabs: 57, objs: 285, free: 0
[ 131.610635] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 131.610643] cache: kmalloc-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
[ 131.610650] kmalloc-2k debugging increased min order, use slab_debug=O to disable.
[ 131.610655] node 0: slabs: 57, objs: 285, free: 0
[ 132.165886] ,cpuset=openrc.tigervnc.1,mems_allowed=0
[ 132.185353] CPU: 1 PID: 1713 Comm: stress-ng-vm Not tainted 6.10.0-rc2-PMacG4-dirty #6
[ 132.203959] Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
[ 132.221955] Call Trace:
[ 132.239781] [c4bbb5b0] [c0770a50] dump_stack_lvl+0x70/0x8c (unreliable)
[ 132.257799] [c4bbb5d0] [c01ae6e8] warn_alloc+0x100/0x178
[ 132.275761] [c4bbb630] [c01aead0] __alloc_pages_noprof+0x370/0x8d0
[ 132.293758] [c4bbb6f0] [c01b3198] alloc_slab_page+0x30/0x6c
[ 132.311716] [c4bbb710] [c01b6284] new_slab+0xd4/0x2f8
[ 132.329674] [c4bbb750] [c01b6880] ___slab_alloc+0x3d8/0x5a4
[ 132.347672] [c4bbb7e0] [c01b7444] kmem_cache_alloc_node_noprof+0xa0/0x20c
[ 132.365200] [c4bbb830] [c01c3770] zswap_store+0x150/0x668
[ 132.381480] [c4bbb8b0] [c01bb574] swap_writepage+0x3c/0xa8
[ 132.396833] [c4bbb8d0] [c0170d88] pageout+0x11c/0x1ec
[ 132.411619] [c4bbb9d0] [c0172d28] shrink_folio_list+0x6e0/0x8c4
[ 132.426298] [c4bbbac0] [c017473c] evict_folios+0x9e4/0xd04
[ 132.441082] [c4bbbbc0] [c0174ba0] try_to_shrink_lruvec+0x144/0x20c
[ 132.456415] [c4bbbc10] [c0174d08] shrink_one+0xa0/0x134
[ 132.472152] [c4bbbc40] [c01765ec] shrink_node+0x238/0x850
[ 132.487596] [c4bbbcc0] [c0177794] do_try_to_free_pages+0x2e4/0x440
[ 132.503050] [c4bbbd20] [c0177b50] try_to_free_pages+0xb4/0xd8
[ 132.518386] [c4bbbd90] [c01aebb4] __alloc_pages_noprof+0x454/0x8d0
[ 132.532818] [c4bbbe50] [c01af648] __folio_alloc_noprof+0x14/0x30
[ 132.547341] [c4bbbe60] [c0193518] folio_prealloc.isra.0+0x38/0xd4
[ 132.561845] [c4bbbe80] [c01973a0] handle_mm_fault+0x294/0x934
[ 132.576293] [c4bbbf00] [c002a358] do_page_fault+0x488/0x5f8
[ 132.590412] [c4bbbf30] [c000433c] DataAccess_virt+0x124/0x17c
[ 132.604216] --- interrupt: 300 at 0xc8fe40
[ 132.617866] NIP: 00c8fe40 LR: 3c500000 CTR: 00000000
[ 132.631450] REGS: c4bbbf40 TRAP: 0300 Not tainted (6.10.0-rc2-PMacG4-dirty)
[ 132.644989] MSR: 0000d032 <EE,PR,ME,IR,DR,RI> CR: 28042464 XER: 00000000
[ 132.658599] DAR: a79d4000 DSISR: 42000000
[ 132.658599] GPR00: ffffffc7 afad5910 a7eb9be0 ffffffa2 a7b33000 ffffffc6 ffffffaa ffffffcf
[ 132.658599] GPR08: ffffffc5 a79d4000 00000001 ffffffa9 ffffffa8 00d9f4d4 ffffffa1 ffffffce
[ 132.658599] GPR16: ffffffa0 ffffffcd ffffffa3 ffffffcc ffffffa4 ffffffcb ffffffa5 ffffffca
[ 132.658599] GPR24: ffffffa6 ffffffc9 ffffffa7 ffffffc8 00000000 00000000 00da69dc 02d36840
[ 132.727245] NIP [00c8fe40] 0xc8fe40
[ 132.741183] LR [3c500000] 0x3c500000
[ 132.755045] --- interrupt: 300
[ 132.768869] Mem-Info:
[ 132.782332] active_anon:318123 inactive_anon:174512 isolated_anon:0
[ 132.782332] active_file:1347 inactive_file:4933 isolated_file:0
[ 132.782332] unevictable:4 dirty:0 writeback:3
[ 132.782332] slab_reclaimable:797 slab_unreclaimable:4909
[ 132.782332] mapped:3536 shmem:17 pagetables:736
[ 132.782332] sec_pagetables:0 bounce:0
[ 132.782332] kernel_misc_reclaimable:0
[ 132.782332] free:1065 free_pcp:2183 free_cma:0
[ 132.884403] Node 0 active_anon:952168kB inactive_anon:1018372kB active_file:18244kB inactive_file:5772kB unevictable:16kB isolated(anon):0kB isolated(file):0kB mapped:13724kB dirty:0kB writeback:12kB shmem:68kB writeback_tmp:0kB kernel_stack:1016kB pagetables:2944kB sec_pagetables:0kB all_unreclaimable? no
[ 132.911283] DMA free:1628kB boost:7780kB min:11240kB low:12104kB high:12968kB reserved_highatomic:0KB active_anon:699472kB inactive_anon:7708kB active_file:432kB inactive_file:152kB unevictable:0kB writepending:12kB present:786432kB managed:749500kB mlocked:0kB bounce:0kB free_pcp:6996kB local_pcp:4348kB free_cma:0kB
[ 132.940408] lowmem_reserve[]: 0 0 1280 0
[ 132.954757] DMA: 0*4kB 1*8kB (M) 1*16kB (M) 2*32kB (UM) 2*64kB (UM) 1*128kB (U) 0*256kB 1*512kB (M) 2*1024kB (M) 0*2048kB 0*4096kB = 2904kB
[ 132.969700] 7515 total pagecache pages
[ 132.984348] 1474 pages in swap cache
[ 132.998683] Free swap = 8356920kB
[ 133.013039] Total swap = 8388604kB
[ 133.026980] 524288 pages RAM
[ 133.040981] 327680 pages HighMem/MovableOnly
[ 133.054649] 9233 pages reserved
[ 248.902911] CPU-temp: 55.0 C
[ 248.902955] , Case: 32.5 C
[ 248.916544] , Fan: 0 (tuned +0)
[ 265.111013] CPU-temp: 55.3 C
[ 265.111048] , Case: 32.6 C
[ 265.123825] , Fan: 0 (tuned +0)
[ 419.114008] CPU-temp: 56.0 C
[ 419.114052] , Case: 33.1 C
[ 419.127088] , Fan: 0 (tuned +0)
[ 581.244933] CPU-temp: 57.0 C
[ 581.244971] , Case: 33.6 C
[ 581.258025] , Fan: 3 (tuned +3)
[ 897.408411] CPU-temp: 58.3 C
[ 897.408462] , Case: 34.1 C
[ 897.421870] , Fan: 4 (tuned +1)
[ 954.148555] CPU-temp: 58.2 C
[ 954.148592] , Case: 34.3 C
[ 954.160511] , Fan: 4 (tuned +0)
[ 1059.529703] CPU-temp: 58.3 C
[ 1059.529739] , Case: 34.5 C
[ 1059.541424] , Fan: 4 (tuned +0)
[ 1173.028710] CPU-temp: 58.2 C
[ 1173.028754] , Case: 34.5 C
[ 1173.041116] , Fan: 4 (tuned +0)
[ 1278.406640] CPU-temp: 58.3 C
[ 1278.406682] , Case: 34.6 C
[ 1278.418102] , Fan: 4 (tuned +0)
[ 1367.569301] CPU-temp: 58.2 C
[ 1367.569334] , Case: 34.7 C
[ 1367.583589] , Fan: 4 (tuned +0)
[ 1416.215137] CPU-temp: 58.3 C
[ 1416.215178] , Case: 34.7 C
[ 1416.229441] , Fan: 4 (tuned +0)
[ 1521.589033] CPU-temp: 58.8 C
[ 1521.589066] , Case: 34.8 C
[ 1521.599749] , Fan: 5 (tuned +1)
[ 1562.120602] CPU-temp: 59.2 C
[ 1562.120645] , Case: 34.8 C
[ 1562.131158] , Fan: 6 (tuned +1)
[ 1618.871592] CPU-temp: 59.6 C
[ 1618.871630] , Case: 35.0 C
[ 1618.882037] , Fan: 7 (tuned +1)
[ 1643.190795] CPU-temp: 59.5 C
[ 1643.190839] , Case: 35.0 C
[ 1643.200852] , Fan: 7 (tuned +0)
[ 1910.699131] CPU-temp: 59.6 C
[ 1910.699167] , Case: 35.2 C
[ 1910.709399] , Fan: 7 (tuned +0)
[ 2275.486437] CPU-temp: 59.5 C
[ 2275.486474] , Case: 35.3 C
[ 2275.496487] , Fan: 7 (tuned +0)
[ 2388.975687] CPU-temp: 59.6 C
[ 2388.975727] , Case: 35.5 C
[ 2388.985071] , Fan: 7 (tuned +0)
[ 2421.403663] CPU-temp: 59.5 C
[ 2421.403703] , Case: 35.3 C
[ 2421.412016] , Fan: 7 (tuned +0)
[ 2518.676576] CPU-temp: 59.1 C
[ 2518.676617] , Case: 35.3 C
[ 2518.684203] , Fan: 6 (tuned -1)
[ 2615.970371] CPU-temp: 59.2 C
[ 2615.970417] , Case: 35.3 C
[ 2615.976660] , Fan: 6 (tuned +0)
[ 2664.608621] CPU-temp: 59.1 C
[ 2664.608655] , Case: 35.3 C
[ 2664.616448] , Fan: 6 (tuned +0)
[ 2810.528996] CPU-temp: 59.3 C
[ 2810.529037] , Case: 35.3 C
[ 2810.535071] , Fan: 6 (tuned +0)
[ 2875.375703] CPU-temp: 59.6 C
[ 2875.375745] , Case: 35.3 C
[ 2875.381553] , Fan: 7 (tuned +1)
[ 2899.694162] CPU-temp: 59.9 C
[ 2899.694209] , Case: 35.5 C
[ 2899.700476] , Fan: 8 (tuned +1)
[ 2915.906757] CPU-temp: 60.1 C
[ 2915.906802] , Case: 35.5 C
[ 2915.912973] , Fan: 9 (tuned +1)
[ 2964.574934] CPU-temp: 60.0 C
[ 2964.574977] , Case: 35.5 C
[ 2964.580995] , Fan: 9 (tuned +0)
[ 2988.863296] CPU-temp: 59.8 C
[ 2988.863342] , Case: 35.5 C
[ 2988.869431] , Fan: 8 (tuned -1)
[ 3048.198507] warn_alloc: 45 callbacks suppressed
[ 3048.198534] kswapd0: page allocation failure: order:0, mode:0xcc0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0
[ 3048.210520] CPU: 0 PID: 39 Comm: kswapd0 Not tainted 6.10.0-rc2-PMacG4-dirty #6
[ 3048.216521] Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
[ 3048.222600] Call Trace:
[ 3048.228630] [c11ad950] [c0770a50] dump_stack_lvl+0x70/0x8c (unreliable)
[ 3048.234938] [c11ad970] [c01ae6e8] warn_alloc+0x100/0x178
[ 3048.241280] [c11ad9d0] [c01aead0] __alloc_pages_noprof+0x370/0x8d0
[ 3048.247712] [c11ada90] [c01bc6cc] __read_swap_cache_async+0xc0/0x1cc
[ 3048.254243] [c11adae0] [c01c2fa8] zswap_writeback_entry+0x50/0x154
[ 3048.260828] [c11adbe0] [c01c311c] shrink_memcg_cb+0x70/0xec
[ 3048.267443] [c11adc10] [c018d2cc] __list_lru_walk_one+0xa0/0x154
[ 3048.274133] [c11adc70] [c018d3e4] list_lru_walk_one+0x64/0x7c
[ 3048.280825] [c11adca0] [c01c2958] zswap_shrinker_scan+0xac/0xc4
[ 3048.287674] [c11adcd0] [c01786bc] do_shrink_slab+0x18c/0x2f4
[ 3048.294524] [c11add20] [c0178bc0] shrink_slab+0x174/0x260
[ 3048.301359] [c11adda0] [c0174d24] shrink_one+0xbc/0x134
[ 3048.308216] [c11addd0] [c01765ec] shrink_node+0x238/0x850
[ 3048.315093] [c11ade50] [c0176f44] balance_pgdat+0x340/0x650
[ 3048.322013] [c11adf50] [c017747c] kswapd+0x228/0x25c
[ 3048.328978] [c11adfc0] [c0064738] kthread+0xe4/0xe8
[ 3048.335939] [c11adff0] [c0015304] start_kernel_thread+0x10/0x14
[ 3048.343207] Mem-Info:
[ 3048.350218] active_anon:495957 inactive_anon:586 isolated_anon:0
[ 3048.350218] active_file:298 inactive_file:651 isolated_file:0
[ 3048.350218] unevictable:4 dirty:0 writeback:2
[ 3048.350218] slab_reclaimable:820 slab_unreclaimable:4903
[ 3048.350218] mapped:815 shmem:5 pagetables:747
[ 3048.350218] sec_pagetables:0 bounce:0
[ 3048.350218] kernel_misc_reclaimable:0
[ 3048.350218] free:126 free_pcp:4141 free_cma:0
[ 3048.409320] Node 0 active_anon:1983828kB inactive_anon:2344kB active_file:1192kB inactive_file:2604kB unevictable:16kB isolated(anon):0kB isolated(file):0kB mapped:3260kB dirty:0kB writeback:8kB shmem:20kB writeback_tmp:0kB kernel_stack:976kB pagetables:2988kB sec_pagetables:0kB all_unreclaimable? no
[ 3048.426872] DMA free:0kB boost:7780kB min:11240kB low:12104kB high:12968kB reserved_highatomic:0KB active_anon:698212kB inactive_anon:788kB active_file:420kB inactive_file:172kB unevictable:0kB writepending:8kB present:786432kB managed:749500kB mlocked:0kB bounce:0kB free_pcp:16564kB local_pcp:5244kB free_cma:0kB
[ 3048.447057] lowmem_reserve[]: 0 0 1280 0
[ 3048.457250] DMA: 0*4kB 4*8kB (UM) 2*16kB (U) 2*32kB (UM) 0*64kB 1*128kB (M) 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 256kB
[ 3048.467959] 2588 total pagecache pages
[ 3048.478700] 1630 pages in swap cache
[ 3048.489327] Free swap = 8352572kB
[ 3048.499985] Total swap = 8388604kB
[ 3048.510670] 524288 pages RAM
[ 3048.521340] 327680 pages HighMem/MovableOnly
[ 3048.532045] 9233 pages reserved
[ 3134.774054] CPU-temp: 59.9 C
[ 3134.774091] , Case: 35.5 C
[ 3134.786203] , Fan: 8 (tuned +0)
[ 3142.886915] CPU-temp: 59.8 C
[ 3142.886950] , Case: 35.6 C
[ 3142.898260] , Fan: 8 (tuned +0)
[ 3159.105744] CPU-temp: 59.9 C
[ 3159.105787] , Case: 35.5 C
[ 3159.117161] , Fan: 8 (tuned +0)
[ 3217.895070] kswapd0: page allocation failure: order:0, mode:0xcc0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0
[ 3217.909562] CPU: 0 PID: 39 Comm: kswapd0 Not tainted 6.10.0-rc2-PMacG4-dirty #6
[ 3217.923140] Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
[ 3217.936959] Call Trace:
[ 3217.950726] [c11ad950] [c0770a50] dump_stack_lvl+0x70/0x8c (unreliable)
[ 3217.964819] [c11ad970] [c01ae6e8] warn_alloc+0x100/0x178
[ 3217.978991] [c11ad9d0] [c01aead0] __alloc_pages_noprof+0x370/0x8d0
[ 3217.993195] [c11ada90] [c01bc6cc] __read_swap_cache_async+0xc0/0x1cc
[ 3218.007477] [c11adae0] [c01c2fa8] zswap_writeback_entry+0x50/0x154
[ 3218.021898] [c11adbe0] [c01c311c] shrink_memcg_cb+0x70/0xec
[ 3218.036317] [c11adc10] [c018d2cc] __list_lru_walk_one+0xa0/0x154
[ 3218.050831] [c11adc70] [c018d3e4] list_lru_walk_one+0x64/0x7c
[ 3218.065437] [c11adca0] [c01c2958] zswap_shrinker_scan+0xac/0xc4
[ 3218.080101] [c11adcd0] [c01786bc] do_shrink_slab+0x18c/0x2f4
[ 3218.094763] [c11add20] [c0178bc0] shrink_slab+0x174/0x260
[ 3218.109135] [c11adda0] [c0174d24] shrink_one+0xbc/0x134
[ 3218.123160] [c11addd0] [c01765ec] shrink_node+0x238/0x850
[ 3218.137082] [c11ade50] [c0176f44] balance_pgdat+0x340/0x650
[ 3218.150937] [c11adf50] [c017747c] kswapd+0x228/0x25c
[ 3218.164689] [c11adfc0] [c0064738] kthread+0xe4/0xe8
[ 3218.178383] [c11adff0] [c0015304] start_kernel_thread+0x10/0x14
[ 3218.192254] Mem-Info:
[ 3218.204092] active_anon:300832 inactive_anon:194293 isolated_anon:0
[ 3218.204092] active_file:731 inactive_file:253 isolated_file:0
[ 3218.204092] unevictable:4 dirty:0 writeback:6
[ 3218.204092] slab_reclaimable:821 slab_unreclaimable:4945
[ 3218.204092] mapped:801 shmem:4 pagetables:749
[ 3218.204092] sec_pagetables:0 bounce:0
[ 3218.204092] kernel_misc_reclaimable:0
[ 3218.204092] free:5354 free_pcp:1722 free_cma:0
[ 3218.307162] Node 0 active_anon:964012kB inactive_anon:1016472kB active_file:524kB inactive_file:3400kB unevictable:16kB isolated(anon):0kB isolated(file):0kB mapped:3204kB dirty:0kB writeback:24kB shmem:16kB writeback_tmp:0kB kernel_stack:976kB pagetables:2996kB sec_pagetables:0kB all_unreclaimable? no
[ 3218.341345] DMA free:10568kB boost:7780kB min:11240kB low:12104kB high:12968kB reserved_highatomic:4096KB active_anon:240288kB inactive_anon:464312kB active_file:268kB inactive_file:244kB unevictable:0kB writepending:24kB present:786432kB managed:749500kB mlocked:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB
[ 3218.378202] lowmem_reserve[]: 0 0 1280 0
[ 3218.396965] DMA: 71*4kB (UMEH) 73*8kB (UMEH) 8*16kB (UMEH) 13*32kB (UMEH) 6*64kB (UMEH) 5*128kB (MEH) 5*256kB (MEH) 6*512kB (MH) 2*1024kB (MH) 1*2048kB (M) 0*4096kB = 10884kB
[ 3218.416624] 14345 total pagecache pages
[ 3218.436151] 13352 pages in swap cache
[ 3218.455423] Free swap = 8284324kB
[ 3218.474694] Total swap = 8388604kB
[ 3218.493823] 524288 pages RAM
[ 3218.512983] 327680 pages HighMem/MovableOnly
[ 3218.532085] 9233 pages reserved
[ 3288.795746] CPU-temp: 60.1 C
[ 3288.795782] , Case: 35.6 C
[ 3288.811249] , Fan: 9 (tuned +1)
[ 3296.901741] CPU-temp: 60.0 C
[ 3296.901777] , Case: 35.6 C
[ 3296.918909] , Fan: 9 (tuned +0)
[ 3337.432660] CPU-temp: 60.1 C
[ 3337.432709] , Case: 35.6 C
[ 3337.444645] , Fan: 9 (tuned +0)
[ 3580.617315] CPU-temp: 60.0 C
[ 3580.617351] , Case: 35.6 C
[ 3580.629920] , Fan: 9 (tuned +0)
[ 3645.467039] CPU-temp: 59.8 C
[ 3645.467076] , Case: 35.6 C
[ 3645.478508] , Fan: 8 (tuned -1)
[ 3742.741662] CPU-temp: 59.9 C
[ 3742.741693] , Case: 35.6 C
[ 3742.753510] , Fan: 8 (tuned +0)
[ 3758.954219] CPU-temp: 59.8 C
[ 3758.954265] , Case: 35.6 C
[ 3758.965967] , Fan: 8 (tuned +0)
[ 3815.712015] CPU-temp: 59.5 C
[ 3815.712058] , Case: 35.5 C
[ 3815.724753] , Fan: 7 (tuned -1)
[ 4042.688229] CPU-temp: 59.1 C
[ 4042.688267] , Case: 35.6 C
[ 4042.703277] , Fan: 6 (tuned -1)
[ 4050.801016] CPU-temp: 59.2 C
[ 4050.801054] , Case: 35.6 C
[ 4050.814999] , Fan: 6 (tuned +0)
[ 4131.856784] CPU-temp: 59.6 C
[ 4131.856823] , Case: 35.5 C
[ 4131.867637] , Fan: 7 (tuned +1)
[ 4180.494111] CPU-temp: 60.0 C
[ 4180.494151] , Case: 35.6 C
[ 4180.504942] , Fan: 8 (tuned +1)
[ 4196.706523] CPU-temp: 60.1 C
[ 4196.706562] , Case: 35.6 C
[ 4196.716948] , Fan: 9 (tuned +1)
[ 4212.920059] CPU-temp: 60.0 C
[ 4212.920105] , Case: 35.6 C
[ 4212.930235] , Fan: 9 (tuned +0)
[ 4237.237208] CPU-temp: 60.1 C
[ 4237.237247] , Case: 35.6 C
[ 4237.247449] , Fan: 9 (tuned +0)
[ 4310.196185] CPU-temp: 60.0 C
[ 4310.196224] , Case: 35.7 C
[ 4310.206500] , Fan: 9 (tuned +0)
[ 4472.402776] CPU-temp: 60.1 C
[ 4472.402805] , Case: 35.7 C
[ 4472.412977] , Fan: 9 (tuned +0)
[ 4480.640908] CPU-temp: 60.0 C
[ 4480.640953] , Case: 35.7 C
[ 4480.650410] , Fan: 9 (tuned +0)
[ 4513.066255] CPU-temp: 60.1 C
[ 4513.066288] , Case: 35.7 C
[ 4513.074840] , Fan: 9 (tuned +0)
[ 4894.056870] CPU-temp: 60.0 C
[ 4894.056911] , Case: 35.7 C
[ 4894.064408] , Fan: 9 (tuned +0)
[ 4918.375665] CPU-temp: 59.8 C
[ 4918.375700] , Case: 35.7 C
[ 4918.381523] , Fan: 8 (tuned -1)
[ 4994.958511] kswapd0: page allocation failure: order:0, mode:0x40cc0(GFP_KERNEL|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0
[ 4994.965388] CPU: 0 PID: 39 Comm: kswapd0 Not tainted 6.10.0-rc2-PMacG4-dirty #6
[ 4994.971640] Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
[ 4994.977925] Call Trace:
[ 4994.984092] [c11ad740] [c0770a50] dump_stack_lvl+0x70/0x8c (unreliable)
[ 4994.990636] [c11ad760] [c01ae6e8] warn_alloc+0x100/0x178
[ 4994.997121] [c11ad7c0] [c01aead0] __alloc_pages_noprof+0x370/0x8d0
[ 4995.003723] [c11ad880] [c01b3198] alloc_slab_page+0x30/0x6c
[ 4995.010410] [c11ad8a0] [c01b6284] new_slab+0xd4/0x2f8
[ 4995.017077] [c11ad8e0] [c01b6880] ___slab_alloc+0x3d8/0x5a4
[ 4995.023799] [c11ad970] [c01b7444] kmem_cache_alloc_node_noprof+0xa0/0x20c
[ 4995.030658] [c11ad9c0] [c01c3770] zswap_store+0x150/0x668
[ 4995.037582] [c11ada40] [c01bb574] swap_writepage+0x3c/0xa8
[ 4995.044532] [c11ada60] [c0170d88] pageout+0x11c/0x1ec
[ 4995.051518] slab_out_of_memory: 36 callbacks suppressed
[ 4995.051524] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 4995.051531] cache: skbuff_small_head, object size: 416, buffer size: 480, default order: 1, min order: 0
[ 4995.051538] node 0: slabs: 17, objs: 289, free: 0
[ 4995.058611] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 4995.058618] cache: skbuff_small_head, object size: 416, buffer size: 480, default order: 1, min order: 0
[ 4995.058626] node 0: slabs: 17, objs: 289, free: 0
[ 4995.065913] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 4995.065921] cache: skbuff_small_head, object size: 416, buffer size: 480, default order: 1, min order: 0
[ 4995.065927] node 0: slabs: 17, objs: 289, free: 0
[ 4995.073477] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 4995.073484] cache: skbuff_small_head, object size: 416, buffer size: 480, default order: 1, min order: 0
[ 4995.073492] node 0: slabs: 17, objs: 289, free: 0
[ 4995.081092] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 4995.081099] cache: skbuff_small_head, object size: 416, buffer size: 480, default order: 1, min order: 0
[ 4995.081106] node 0: slabs: 17, objs: 289, free: 0
[ 4995.088898] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 4995.088905] cache: kmalloc-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
[ 4995.088912] kmalloc-2k debugging increased min order, use slab_debug=O to disable.
[ 4995.088916] node 0: slabs: 58, objs: 290, free: 0
[ 4995.088934] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 4995.088940] cache: skbuff_small_head, object size: 416, buffer size: 480, default order: 1, min order: 0
[ 4995.088947] node 0: slabs: 17, objs: 289, free: 0
[ 4995.097011] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 4995.097018] cache: kmalloc-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
[ 4995.097025] kmalloc-2k debugging increased min order, use slab_debug=O to disable.
[ 4995.097029] node 0: slabs: 58, objs: 290, free: 0
[ 4995.097046] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 4995.097052] cache: skbuff_small_head, object size: 416, buffer size: 480, default order: 1, min order: 0
[ 4995.097058] node 0: slabs: 17, objs: 289, free: 0
[ 4995.105118] SLUB: Unable to allocate memory on node -1, gfp=0x820(GFP_ATOMIC)
[ 4995.105125] cache: kmalloc-2k, object size: 2048, buffer size: 6144, default order: 3, min order: 1
[ 4995.105132] kmalloc-2k debugging increased min order, use slab_debug=O to disable.
[ 4995.105136] node 0: slabs: 58, objs: 290, free: 0
[ 4995.389532] [c11adb60] [c0172d28] shrink_folio_list+0x6e0/0x8c4
[ 4995.402331] [c11adc50] [c017473c] evict_folios+0x9e4/0xd04
[ 4995.415167] [c11add50] [c0174ba0] try_to_shrink_lruvec+0x144/0x20c
[ 4995.428050] [c11adda0] [c0174d08] shrink_one+0xa0/0x134
[ 4995.440934] [c11addd0] [c01765ec] shrink_node+0x238/0x850
[ 4995.453905] [c11ade50] [c0176f44] balance_pgdat+0x340/0x650
[ 4995.466895] [c11adf50] [c017747c] kswapd+0x228/0x25c
[ 4995.479901] [c11adfc0] [c0064738] kthread+0xe4/0xe8
[ 4995.492912] [c11adff0] [c0015304] start_kernel_thread+0x10/0x14
[ 4995.506208] Mem-Info:
[ 4995.519338] active_anon:2466 inactive_anon:317794 isolated_anon:0
[ 4995.519338] active_file:472 inactive_file:305 isolated_file:0
[ 4995.519338] unevictable:4 dirty:0 writeback:0
[ 4995.519338] slab_reclaimable:1061 slab_unreclaimable:6970
[ 4995.519338] mapped:635 shmem:4 pagetables:747
[ 4995.519338] sec_pagetables:0 bounce:0
[ 4995.519338] kernel_misc_reclaimable:0
[ 4995.519338] free:178928 free_pcp:270 free_cma:0
[ 4995.626862] Node 0 active_anon:9864kB inactive_anon:1267060kB active_file:1888kB inactive_file:1220kB unevictable:16kB isolated(anon):0kB isolated(file):0kB mapped:2540kB dirty:0kB writeback:0kB shmem:16kB writeback_tmp:0kB kernel_stack:976kB pagetables:2988kB sec_pagetables:0kB all_unreclaimable? no
[ 4995.655724] DMA free:26636kB boost:7780kB min:11240kB low:12104kB high:12968kB reserved_highatomic:0KB active_anon:9144kB inactive_anon:666364kB active_file:252kB inactive_file:160kB unevictable:0kB writepending:0kB present:786432kB managed:749500kB mlocked:0kB bounce:0kB free_pcp:824kB local_pcp:164kB free_cma:0kB
[ 4995.686266] lowmem_reserve[]: 0 0 1280 0
[ 4995.701554] DMA: 437*4kB (UME) 235*8kB (UME) 121*16kB (UME) 89*32kB (UME) 71*64kB (UME) 40*128kB (UME) 34*256kB (UM) 2*512kB (U) 1*1024kB (U) 0*2048kB 0*4096kB = 28828kB
[ 4995.717654] 2468 total pagecache pages
[ 4995.733509] 1683 pages in swap cache
[ 4995.749365] Free swap = 7635224kB
[ 4995.765217] Total swap = 8388604kB
[ 4995.780935] 524288 pages RAM
[ 4995.796593] 327680 pages HighMem/MovableOnly
[ 4995.812242] 9233 pages reserved
[ 5023.770315] CPU-temp: 60.0 C
[ 5023.770364] , Case: 35.7 C
[ 5023.787286] , Fan: 8 (tuned +0)
[ 5048.079392] CPU-temp: 59.8 C
[ 5048.079454] , Case: 35.7 C
[ 5048.096377] , Fan: 8 (tuned +0)
[ 5096.713555] CPU-temp: 59.5 C
[ 5096.713615] , Case: 35.6 C
[ 5096.729898] , Fan: 7 (tuned -1)
[ 5275.051132] CPU-temp: 59.6 C
[ 5275.051168] , Case: 35.6 C
[ 5275.066766] , Fan: 7 (tuned +0)
[ 5291.267040] CPU-temp: 59.5 C
[ 5291.267089] , Case: 35.6 C
[ 5291.281053] , Fan: 7 (tuned +0)
[ 5348.007223] CPU-temp: 59.1 C
[ 5348.007262] , Case: 35.6 C
[ 5348.024965] , Fan: 6 (tuned -1)
[ 5356.120122] CPU-temp: 59.2 C
[ 5356.120160] , Case: 35.6 C
[ 5356.137286] , Fan: 6 (tuned +0)
[ 5364.226373] CPU-temp: 59.1 C
[ 5364.226410] , Case: 35.6 C
[ 5364.242719] , Fan: 6 (tuned +0)
[ 5396.648148] CPU-temp: 59.3 C
[ 5396.648188] , Case: 35.6 C
[ 5396.660322] , Fan: 6 (tuned +0)
[ 5485.817023] CPU-temp: 59.6 C
[ 5485.817061] , Case: 35.6 C
[ 5485.828953] , Fan: 7 (tuned +1)
[ 5526.344992] CPU-temp: 59.9 C
[ 5526.345036] , Case: 35.6 C
[ 5526.356323] , Fan: 8 (tuned +1)
[ 5542.557488] CPU-temp: 60.2 C
[ 5542.557534] , Case: 35.7 C
[ 5542.568159] , Fan: 9 (tuned +1)
[ 5568.155900] BTRFS info (device sda6): last unmount of filesystem 65162d91-887e-4e48-a356-fbf7093eefb5
[ 5568.216726] EXT4-fs (sdc5): unmounting filesystem e4e8af9e-0f0d-44f9-b983-71bf61d782de.
[ 5571.483231] elogind-daemon[1510]: Received signal 15 [TERM]
[ 5572.077919] EXT4-fs (sda5): re-mounted fa07e66f-b4f9-404f-85d8-487d3c097aec ro. Quota mode: disabled.
[ 5572.600354] sd 3:0:0:0: [sdc] Stopping disk
[ 5572.610585] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 5572.621181] sd 1:0:0:0: [sdb] Stopping disk
[ 5572.631379] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 5572.641681] sd 0:0:0:0: [sda] Stopping disk
[ 5572.660328] reboot: Power down
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-05 23:04 ` Erhard Furtner
@ 2024-06-05 23:41 ` Yosry Ahmed
2024-06-05 23:52 ` Yu Zhao
` (3 more replies)
0 siblings, 4 replies; 45+ messages in thread
From: Yosry Ahmed @ 2024-06-05 23:41 UTC (permalink / raw)
To: Erhard Furtner
Cc: Yu Zhao, linux-mm, linux-kernel, linuxppc-dev, Johannes Weiner,
Nhat Pham, Chengming Zhou, Sergey Senozhatsky, Minchan Kim,
Vlastimil Babka (SUSE)
On Wed, Jun 5, 2024 at 4:04 PM Erhard Furtner <erhard_f@mailbox.org> wrote:
>
> On Tue, 4 Jun 2024 20:03:27 -0700
> Yosry Ahmed <yosryahmed@google.com> wrote:
>
> > Could you check if the attached patch helps? It basically changes the
> > number of zpools from 32 to min(32, nr_cpus).
>
> Thanks! The patch does not fix the issue but it helps.
>
> Means I still get to see the 'kswapd0: page allocation failure' in the dmesg, a 'stress-ng-vm: page allocation failure' later on, another kswapd0 error later on, etc. _but_ the machine keeps running the workload, stays usable via VNC and I get no hard crash any longer.
>
> Without patch kswapd0 error and hard crash (need to power-cycle) <3min. With patch several kswapd0 errors but running for 2 hrs now. I double checked this to be sure.
Thanks for trying this out. This is interesting, so even two zpools is
too much fragmentation for your use case.
I think there are multiple ways to go forward here:
(a) Make the number of zpools a config option, leave the default as
32, but allow special use cases to set it to 1 or similar. This is
probably not preferable because it is not clear to users how to set
it, but the idea is that no one will have to set it except special use
cases such as Erhard's (who will want to set it to 1 in this case).
(b) Make the number of zpools scale linearly with the number of CPUs.
Maybe something like nr_cpus/4 or nr_cpus/8. The problem with this
approach is that with a large number of CPUs, too many zpools will
start having diminishing returns. Fragmentation will keep increasing,
while the scalability/concurrency gains will diminish.
(c) Make the number of zpools scale logarithmically with the number of
CPUs. Maybe something like 4log2(nr_cpus). This will keep the number
of zpools from increasing too much and close to the status quo. The
problem is that at a small number of CPUs (e.g. 2), 4log2(nr_cpus)
will actually give a nr_zpools > nr_cpus. So we will need to come up
with a more fancy magic equation (e.g. 4log2(nr_cpus/4)).
(d) Make the number of zpools scale linearly with memory. This makes
more sense than scaling with CPUs because increasing the number of
zpools increases fragmentation, so it makes sense to limit it by the
available memory. This is also more consistent with other magic
numbers we have (e.g. SWAP_ADDRESS_SPACE_SHIFT).
The problem is that unlike zswap trees, the zswap pool is not
connected to the swapfile size, so we don't have an indication for how
much memory will be in the zswap pool. We can scale the number of
zpools with the entire memory on the machine during boot, but this
seems like it would be difficult to figure out, and will not take into
consideration memory hotplugging and the zswap global limit changing.
(e) A creative mix of the above.
(f) Something else (probably simpler).
I am personally leaning toward (c), but I want to hear the opinions of
other people here. Yu, Vlastimil, Johannes, Nhat? Anyone else?
In the long-term, I think we may want to address the lock contention
in zsmalloc itself instead of zswap spawning multiple zpools.
>
> The patch did not apply cleanly on v6.9.3 so I applied it on v6.10-rc2. dmesg of the current v6.10-rc2 run attached.
>
> Regards,
> Erhard
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-05 23:41 ` Yosry Ahmed
@ 2024-06-05 23:52 ` Yu Zhao
2024-06-05 23:58 ` Yosry Ahmed
2024-06-06 2:49 ` Chengming Zhou
` (2 subsequent siblings)
3 siblings, 1 reply; 45+ messages in thread
From: Yu Zhao @ 2024-06-05 23:52 UTC (permalink / raw)
To: Yosry Ahmed
Cc: Erhard Furtner, linux-mm, linux-kernel, linuxppc-dev,
Johannes Weiner, Nhat Pham, Chengming Zhou, Sergey Senozhatsky,
Minchan Kim, Vlastimil Babka (SUSE)
On Wed, Jun 5, 2024 at 5:42 PM Yosry Ahmed <yosryahmed@google.com> wrote:
>
> On Wed, Jun 5, 2024 at 4:04 PM Erhard Furtner <erhard_f@mailbox.org> wrote:
> >
> > On Tue, 4 Jun 2024 20:03:27 -0700
> > Yosry Ahmed <yosryahmed@google.com> wrote:
> >
> > > Could you check if the attached patch helps? It basically changes the
> > > number of zpools from 32 to min(32, nr_cpus).
> >
> > Thanks! The patch does not fix the issue but it helps.
> >
> > Means I still get to see the 'kswapd0: page allocation failure' in the dmesg, a 'stress-ng-vm: page allocation failure' later on, another kswapd0 error later on, etc. _but_ the machine keeps running the workload, stays usable via VNC and I get no hard crash any longer.
> >
> > Without patch kswapd0 error and hard crash (need to power-cycle) <3min. With patch several kswapd0 errors but running for 2 hrs now. I double checked this to be sure.
>
> Thanks for trying this out. This is interesting, so even two zpools is
> too much fragmentation for your use case.
Now I'm a little bit skeptical that the problem is due to fragmentation.
> I think there are multiple ways to go forward here:
> (a) Make the number of zpools a config option, leave the default as
> 32, but allow special use cases to set it to 1 or similar. This is
> probably not preferable because it is not clear to users how to set
> it, but the idea is that no one will have to set it except special use
> cases such as Erhard's (who will want to set it to 1 in this case).
>
> (b) Make the number of zpools scale linearly with the number of CPUs.
> Maybe something like nr_cpus/4 or nr_cpus/8. The problem with this
> approach is that with a large number of CPUs, too many zpools will
> start having diminishing returns. Fragmentation will keep increasing,
> while the scalability/concurrency gains will diminish.
>
> (c) Make the number of zpools scale logarithmically with the number of
> CPUs. Maybe something like 4log2(nr_cpus). This will keep the number
> of zpools from increasing too much and close to the status quo. The
> problem is that at a small number of CPUs (e.g. 2), 4log2(nr_cpus)
> will actually give a nr_zpools > nr_cpus. So we will need to come up
> with a more fancy magic equation (e.g. 4log2(nr_cpus/4)).
>
> (d) Make the number of zpools scale linearly with memory. This makes
> more sense than scaling with CPUs because increasing the number of
> zpools increases fragmentation, so it makes sense to limit it by the
> available memory. This is also more consistent with other magic
> numbers we have (e.g. SWAP_ADDRESS_SPACE_SHIFT).
>
> The problem is that unlike zswap trees, the zswap pool is not
> connected to the swapfile size, so we don't have an indication for how
> much memory will be in the zswap pool. We can scale the number of
> zpools with the entire memory on the machine during boot, but this
> seems like it would be difficult to figure out, and will not take into
> consideration memory hotplugging and the zswap global limit changing.
>
> (e) A creative mix of the above.
>
> (f) Something else (probably simpler).
>
> I am personally leaning toward (c), but I want to hear the opinions of
> other people here. Yu, Vlastimil, Johannes, Nhat? Anyone else?
I double checked that commit and didn't find anything wrong. If we are
all in the mood of getting to the bottom, can we try using only 1
zpool while there are 2 available? I.e.,
static struct zpool *zswap_find_zpool(struct zswap_entry *entry)
{
- return entry->pool->zpools[hash_ptr(entry, ilog2(ZSWAP_NR_ZPOOLS))];
+ return entry->pool->zpools[0];
}
> In the long-term, I think we may want to address the lock contention
> in zsmalloc itself instead of zswap spawning multiple zpools.
>
> >
> > The patch did not apply cleanly on v6.9.3 so I applied it on v6.10-rc2. dmesg of the current v6.10-rc2 run attached.
> >
> > Regards,
> > Erhard
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-05 23:52 ` Yu Zhao
@ 2024-06-05 23:58 ` Yosry Ahmed
2024-06-06 13:28 ` Erhard Furtner
0 siblings, 1 reply; 45+ messages in thread
From: Yosry Ahmed @ 2024-06-05 23:58 UTC (permalink / raw)
To: Yu Zhao
Cc: Erhard Furtner, linux-mm, linux-kernel, linuxppc-dev,
Johannes Weiner, Nhat Pham, Chengming Zhou, Sergey Senozhatsky,
Minchan Kim, Vlastimil Babka (SUSE)
[-- Attachment #1: Type: text/plain, Size: 4373 bytes --]
On Wed, Jun 5, 2024 at 4:53 PM Yu Zhao <yuzhao@google.com> wrote:
>
> On Wed, Jun 5, 2024 at 5:42 PM Yosry Ahmed <yosryahmed@google.com> wrote:
> >
> > On Wed, Jun 5, 2024 at 4:04 PM Erhard Furtner <erhard_f@mailbox.org> wrote:
> > >
> > > On Tue, 4 Jun 2024 20:03:27 -0700
> > > Yosry Ahmed <yosryahmed@google.com> wrote:
> > >
> > > > Could you check if the attached patch helps? It basically changes the
> > > > number of zpools from 32 to min(32, nr_cpus).
> > >
> > > Thanks! The patch does not fix the issue but it helps.
> > >
> > > Means I still get to see the 'kswapd0: page allocation failure' in the dmesg, a 'stress-ng-vm: page allocation failure' later on, another kswapd0 error later on, etc. _but_ the machine keeps running the workload, stays usable via VNC and I get no hard crash any longer.
> > >
> > > Without patch kswapd0 error and hard crash (need to power-cycle) <3min. With patch several kswapd0 errors but running for 2 hrs now. I double checked this to be sure.
> >
> > Thanks for trying this out. This is interesting, so even two zpools is
> > too much fragmentation for your use case.
>
> Now I'm a little bit skeptical that the problem is due to fragmentation.
>
> > I think there are multiple ways to go forward here:
> > (a) Make the number of zpools a config option, leave the default as
> > 32, but allow special use cases to set it to 1 or similar. This is
> > probably not preferable because it is not clear to users how to set
> > it, but the idea is that no one will have to set it except special use
> > cases such as Erhard's (who will want to set it to 1 in this case).
> >
> > (b) Make the number of zpools scale linearly with the number of CPUs.
> > Maybe something like nr_cpus/4 or nr_cpus/8. The problem with this
> > approach is that with a large number of CPUs, too many zpools will
> > start having diminishing returns. Fragmentation will keep increasing,
> > while the scalability/concurrency gains will diminish.
> >
> > (c) Make the number of zpools scale logarithmically with the number of
> > CPUs. Maybe something like 4log2(nr_cpus). This will keep the number
> > of zpools from increasing too much and close to the status quo. The
> > problem is that at a small number of CPUs (e.g. 2), 4log2(nr_cpus)
> > will actually give a nr_zpools > nr_cpus. So we will need to come up
> > with a more fancy magic equation (e.g. 4log2(nr_cpus/4)).
> >
> > (d) Make the number of zpools scale linearly with memory. This makes
> > more sense than scaling with CPUs because increasing the number of
> > zpools increases fragmentation, so it makes sense to limit it by the
> > available memory. This is also more consistent with other magic
> > numbers we have (e.g. SWAP_ADDRESS_SPACE_SHIFT).
> >
> > The problem is that unlike zswap trees, the zswap pool is not
> > connected to the swapfile size, so we don't have an indication for how
> > much memory will be in the zswap pool. We can scale the number of
> > zpools with the entire memory on the machine during boot, but this
> > seems like it would be difficult to figure out, and will not take into
> > consideration memory hotplugging and the zswap global limit changing.
> >
> > (e) A creative mix of the above.
> >
> > (f) Something else (probably simpler).
> >
> > I am personally leaning toward (c), but I want to hear the opinions of
> > other people here. Yu, Vlastimil, Johannes, Nhat? Anyone else?
>
> I double checked that commit and didn't find anything wrong. If we are
> all in the mood of getting to the bottom, can we try using only 1
> zpool while there are 2 available? I.e.,
Erhard, do you mind checking if Yu's diff below to use a single zpool
fixes the problem completely? There is also an attached patch that
does the same thing if this is easier to apply for you.
>
> static struct zpool *zswap_find_zpool(struct zswap_entry *entry)
> {
> - return entry->pool->zpools[hash_ptr(entry, ilog2(ZSWAP_NR_ZPOOLS))];
> + return entry->pool->zpools[0];
> }
>
> > In the long-term, I think we may want to address the lock contention
> > in zsmalloc itself instead of zswap spawning multiple zpools.
> >
> > >
> > > The patch did not apply cleanly on v6.9.3 so I applied it on v6.10-rc2. dmesg of the current v6.10-rc2 run attached.
> > >
> > > Regards,
> > > Erhard
[-- Attachment #2: 0001-mm-zswap-set-ZSWAP_NR_ZPOOLS-to-1.patch --]
[-- Type: application/octet-stream, Size: 824 bytes --]
From c6c477dae9cb8bcdefaf1c1a0e8869efa8bfe3f9 Mon Sep 17 00:00:00 2001
From: Yosry Ahmed <yosryahmed@google.com>
Date: Wed, 5 Jun 2024 23:56:15 +0000
Subject: [PATCH] mm: zswap: set ZSWAP_NR_ZPOOLS to 1
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
---
mm/zswap.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/mm/zswap.c b/mm/zswap.c
index a50e2986cd2fa..2bfa91518d405 100644
--- a/mm/zswap.c
+++ b/mm/zswap.c
@@ -124,7 +124,7 @@ module_param_named(accept_threshold_percent, zswap_accept_thr_percent,
uint, 0644);
/* Number of zpools in zswap_pool (empirically determined for scalability) */
-#define ZSWAP_NR_ZPOOLS 32
+#define ZSWAP_NR_ZPOOLS 1
/* Enable/disable memory pressure-based shrinker. */
static bool zswap_shrinker_enabled = IS_ENABLED(
--
2.45.1.467.gbab1589fc0-goog
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-05 23:41 ` Yosry Ahmed
2024-06-05 23:52 ` Yu Zhao
@ 2024-06-06 2:49 ` Chengming Zhou
2024-06-06 4:31 ` Sergey Senozhatsky
2024-06-06 7:24 ` Vlastimil Babka (SUSE)
2024-06-06 17:14 ` Takero Funaki
3 siblings, 1 reply; 45+ messages in thread
From: Chengming Zhou @ 2024-06-06 2:49 UTC (permalink / raw)
To: Yosry Ahmed, Erhard Furtner
Cc: Yu Zhao, linux-mm, linux-kernel, linuxppc-dev, Johannes Weiner,
Nhat Pham, Sergey Senozhatsky, Minchan Kim,
Vlastimil Babka (SUSE)
On 2024/6/6 07:41, Yosry Ahmed wrote:
> On Wed, Jun 5, 2024 at 4:04 PM Erhard Furtner <erhard_f@mailbox.org> wrote:
>>
>> On Tue, 4 Jun 2024 20:03:27 -0700
>> Yosry Ahmed <yosryahmed@google.com> wrote:
>>
>>> Could you check if the attached patch helps? It basically changes the
>>> number of zpools from 32 to min(32, nr_cpus).
>>
>> Thanks! The patch does not fix the issue but it helps.
>>
>> Means I still get to see the 'kswapd0: page allocation failure' in the dmesg, a 'stress-ng-vm: page allocation failure' later on, another kswapd0 error later on, etc. _but_ the machine keeps running the workload, stays usable via VNC and I get no hard crash any longer.
>>
>> Without patch kswapd0 error and hard crash (need to power-cycle) <3min. With patch several kswapd0 errors but running for 2 hrs now. I double checked this to be sure.
>
> Thanks for trying this out. This is interesting, so even two zpools is
> too much fragmentation for your use case.
>
> I think there are multiple ways to go forward here:
> (a) Make the number of zpools a config option, leave the default as
> 32, but allow special use cases to set it to 1 or similar. This is
> probably not preferable because it is not clear to users how to set
> it, but the idea is that no one will have to set it except special use
> cases such as Erhard's (who will want to set it to 1 in this case).
>
> (b) Make the number of zpools scale linearly with the number of CPUs.
> Maybe something like nr_cpus/4 or nr_cpus/8. The problem with this
> approach is that with a large number of CPUs, too many zpools will
> start having diminishing returns. Fragmentation will keep increasing,
> while the scalability/concurrency gains will diminish.
>
> (c) Make the number of zpools scale logarithmically with the number of
> CPUs. Maybe something like 4log2(nr_cpus). This will keep the number
> of zpools from increasing too much and close to the status quo. The
> problem is that at a small number of CPUs (e.g. 2), 4log2(nr_cpus)
> will actually give a nr_zpools > nr_cpus. So we will need to come up
> with a more fancy magic equation (e.g. 4log2(nr_cpus/4)).
>
> (d) Make the number of zpools scale linearly with memory. This makes
> more sense than scaling with CPUs because increasing the number of
> zpools increases fragmentation, so it makes sense to limit it by the
> available memory. This is also more consistent with other magic
> numbers we have (e.g. SWAP_ADDRESS_SPACE_SHIFT).
>
> The problem is that unlike zswap trees, the zswap pool is not
> connected to the swapfile size, so we don't have an indication for how
> much memory will be in the zswap pool. We can scale the number of
> zpools with the entire memory on the machine during boot, but this
> seems like it would be difficult to figure out, and will not take into
> consideration memory hotplugging and the zswap global limit changing.
>
> (e) A creative mix of the above.
>
> (f) Something else (probably simpler).
>
> I am personally leaning toward (c), but I want to hear the opinions of
> other people here. Yu, Vlastimil, Johannes, Nhat? Anyone else?
>
> In the long-term, I think we may want to address the lock contention
> in zsmalloc itself instead of zswap spawning multiple zpools.
>
Agree, I think we should try to improve locking scalability of zsmalloc.
I have some thoughts to share, no code or test data yet:
1. First, we can change the pool global lock to per-class lock, which
is more fine-grained.
2. Actually, we only need to take per-zspage lock when malloc/free,
only need to take class lock when its fullness changed.
3. If this is not enough, we can have fewer fullness groups, so the
need to take class lock becomes fewer. (will need some test data)
More comments are welcome. Thanks!
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-01 15:37 ` David Hildenbrand
@ 2024-06-06 3:11 ` Michael Ellerman
2024-06-06 3:38 ` Yu Zhao
0 siblings, 1 reply; 45+ messages in thread
From: Michael Ellerman @ 2024-06-06 3:11 UTC (permalink / raw)
To: David Hildenbrand, Yu Zhao, Erhard Furtner
Cc: linux-mm, linux-kernel, linuxppc-dev
David Hildenbrand <david@redhat.com> writes:
> On 01.06.24 08:01, Yu Zhao wrote:
>> On Wed, May 15, 2024 at 4:06 PM Yu Zhao <yuzhao@google.com> wrote:
...
>>
>> Your system has 2GB memory and it uses zswap with zsmalloc (which is
>> good since it can allocate from the highmem zone) and zstd/lzo (which
>> doesn't matter much). Somehow -- I couldn't figure out why -- it
>> splits the 2GB into a 0.25GB DMA zone and a 1.75GB highmem zone:
>>
>> [ 0.000000] Zone ranges:
>> [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
>> [ 0.000000] Normal empty
>> [ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff]
>
> That's really odd. But we are messing with "PowerMac3,6", so I don't
> really know what's right or wrong ...
The DMA zone exists because 9739ab7eda45 ("powerpc: enable a 30-bit
ZONE_DMA for 32-bit pmac") selects it.
It's 768MB (not 0.25GB) because it's clamped at max_low_pfn:
#ifdef CONFIG_ZONE_DMA
max_zone_pfns[ZONE_DMA] = min(max_low_pfn,
1UL << (zone_dma_bits - PAGE_SHIFT));
#endif
Which comes eventually from CONFIG_LOWMEM_SIZE, which defaults to 768MB.
I think it's 768MB because the user:kernel split is 3G:1G, and then the
kernel needs some of that 1G virtual space for vmalloc/ioremap/highmem,
so it splits it 768M:256M.
Then ZONE_NORMAL is empty because it is also limited to max_low_pfn:
max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
The rest of RAM is highmem.
So I think that's all behaving as expected, but I don't know 32-bit /
highmem stuff that well so I could be wrong.
cheers
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-06 3:11 ` Michael Ellerman
@ 2024-06-06 3:38 ` Yu Zhao
2024-06-06 12:08 ` Michael Ellerman
0 siblings, 1 reply; 45+ messages in thread
From: Yu Zhao @ 2024-06-06 3:38 UTC (permalink / raw)
To: Michael Ellerman, Erhard Furtner
Cc: David Hildenbrand, linux-mm, linux-kernel, linuxppc-dev
On Wed, Jun 5, 2024 at 9:12 PM Michael Ellerman <mpe@ellerman.id.au> wrote:
>
> David Hildenbrand <david@redhat.com> writes:
> > On 01.06.24 08:01, Yu Zhao wrote:
> >> On Wed, May 15, 2024 at 4:06 PM Yu Zhao <yuzhao@google.com> wrote:
> ...
> >>
> >> Your system has 2GB memory and it uses zswap with zsmalloc (which is
> >> good since it can allocate from the highmem zone) and zstd/lzo (which
> >> doesn't matter much). Somehow -- I couldn't figure out why -- it
> >> splits the 2GB into a 0.25GB DMA zone and a 1.75GB highmem zone:
> >>
> >> [ 0.000000] Zone ranges:
> >> [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
> >> [ 0.000000] Normal empty
> >> [ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff]
> >
> > That's really odd. But we are messing with "PowerMac3,6", so I don't
> > really know what's right or wrong ...
>
> The DMA zone exists because 9739ab7eda45 ("powerpc: enable a 30-bit
> ZONE_DMA for 32-bit pmac") selects it.
>
> It's 768MB (not 0.25GB) because it's clamped at max_low_pfn:
Right. (I meant 0.75GB.)
> #ifdef CONFIG_ZONE_DMA
> max_zone_pfns[ZONE_DMA] = min(max_low_pfn,
> 1UL << (zone_dma_bits - PAGE_SHIFT));
> #endif
>
> Which comes eventually from CONFIG_LOWMEM_SIZE, which defaults to 768MB.
I see. I grep'ed VMSPLIT which is used on x86 and arm but apparently
not on powerpc.
> I think it's 768MB because the user:kernel split is 3G:1G, and then the
> kernel needs some of that 1G virtual space for vmalloc/ioremap/highmem,
> so it splits it 768M:256M.
>
> Then ZONE_NORMAL is empty because it is also limited to max_low_pfn:
>
> max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
>
> The rest of RAM is highmem.
>
> So I think that's all behaving as expected, but I don't know 32-bit /
> highmem stuff that well so I could be wrong.
Yes, the three zones work as intended.
Erhard,
Since your system only has 2GB memory, I'd try the 2G:2G split, which
would in theory allow both the kernel and userspace to all memory.
CONFIG_LOWMEM_SIZE_BOOL=y
CONFIG_LOWMEM_SIZE=0x7000000
(Michael, please correct me if the above wouldn't work.)
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-06 2:49 ` Chengming Zhou
@ 2024-06-06 4:31 ` Sergey Senozhatsky
2024-06-06 4:46 ` Chengming Zhou
0 siblings, 1 reply; 45+ messages in thread
From: Sergey Senozhatsky @ 2024-06-06 4:31 UTC (permalink / raw)
To: Chengming Zhou
Cc: Yosry Ahmed, Erhard Furtner, Yu Zhao, linux-mm, linux-kernel,
linuxppc-dev, Johannes Weiner, Nhat Pham, Sergey Senozhatsky,
Minchan Kim, Vlastimil Babka (SUSE)
On (24/06/06 10:49), Chengming Zhou wrote:
> > Thanks for trying this out. This is interesting, so even two zpools is
> > too much fragmentation for your use case.
> >
> > I think there are multiple ways to go forward here:
> > (a) Make the number of zpools a config option, leave the default as
> > 32, but allow special use cases to set it to 1 or similar. This is
> > probably not preferable because it is not clear to users how to set
> > it, but the idea is that no one will have to set it except special use
> > cases such as Erhard's (who will want to set it to 1 in this case).
> >
> > (b) Make the number of zpools scale linearly with the number of CPUs.
> > Maybe something like nr_cpus/4 or nr_cpus/8. The problem with this
> > approach is that with a large number of CPUs, too many zpools will
> > start having diminishing returns. Fragmentation will keep increasing,
> > while the scalability/concurrency gains will diminish.
> >
> > (c) Make the number of zpools scale logarithmically with the number of
> > CPUs. Maybe something like 4log2(nr_cpus). This will keep the number
> > of zpools from increasing too much and close to the status quo. The
> > problem is that at a small number of CPUs (e.g. 2), 4log2(nr_cpus)
> > will actually give a nr_zpools > nr_cpus. So we will need to come up
> > with a more fancy magic equation (e.g. 4log2(nr_cpus/4)).
> >
> > (d) Make the number of zpools scale linearly with memory. This makes
> > more sense than scaling with CPUs because increasing the number of
> > zpools increases fragmentation, so it makes sense to limit it by the
> > available memory. This is also more consistent with other magic
> > numbers we have (e.g. SWAP_ADDRESS_SPACE_SHIFT).
> >
> > The problem is that unlike zswap trees, the zswap pool is not
> > connected to the swapfile size, so we don't have an indication for how
> > much memory will be in the zswap pool. We can scale the number of
> > zpools with the entire memory on the machine during boot, but this
> > seems like it would be difficult to figure out, and will not take into
> > consideration memory hotplugging and the zswap global limit changing.
> >
> > (e) A creative mix of the above.
> >
> > (f) Something else (probably simpler).
> >
> > I am personally leaning toward (c), but I want to hear the opinions of
> > other people here. Yu, Vlastimil, Johannes, Nhat? Anyone else?
> >
> > In the long-term, I think we may want to address the lock contention
> > in zsmalloc itself instead of zswap spawning multiple zpools.
Sorry, I'm sure I'm not following this discussion closely enough,
has the lock contention been demonstrated/proved somehow? lock-stats?
> Agree, I think we should try to improve locking scalability of zsmalloc.
> I have some thoughts to share, no code or test data yet:
>
> 1. First, we can change the pool global lock to per-class lock, which
> is more fine-grained.
Commit c0547d0b6a4b6 "zsmalloc: consolidate zs_pool's migrate_lock
and size_class's locks" [1] claimed no significant difference
between class->lock and pool->lock.
[1] https://lkml.kernel.org/r/20221128191616.1261026-4-nphamcs@gmail.com
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-06 4:31 ` Sergey Senozhatsky
@ 2024-06-06 4:46 ` Chengming Zhou
2024-06-06 5:43 ` Sergey Senozhatsky
0 siblings, 1 reply; 45+ messages in thread
From: Chengming Zhou @ 2024-06-06 4:46 UTC (permalink / raw)
To: Sergey Senozhatsky
Cc: Yosry Ahmed, Erhard Furtner, Yu Zhao, linux-mm, linux-kernel,
linuxppc-dev, Johannes Weiner, Nhat Pham, Minchan Kim,
Vlastimil Babka (SUSE)
On 2024/6/6 12:31, Sergey Senozhatsky wrote:
> On (24/06/06 10:49), Chengming Zhou wrote:
>>> Thanks for trying this out. This is interesting, so even two zpools is
>>> too much fragmentation for your use case.
>>>
>>> I think there are multiple ways to go forward here:
>>> (a) Make the number of zpools a config option, leave the default as
>>> 32, but allow special use cases to set it to 1 or similar. This is
>>> probably not preferable because it is not clear to users how to set
>>> it, but the idea is that no one will have to set it except special use
>>> cases such as Erhard's (who will want to set it to 1 in this case).
>>>
>>> (b) Make the number of zpools scale linearly with the number of CPUs.
>>> Maybe something like nr_cpus/4 or nr_cpus/8. The problem with this
>>> approach is that with a large number of CPUs, too many zpools will
>>> start having diminishing returns. Fragmentation will keep increasing,
>>> while the scalability/concurrency gains will diminish.
>>>
>>> (c) Make the number of zpools scale logarithmically with the number of
>>> CPUs. Maybe something like 4log2(nr_cpus). This will keep the number
>>> of zpools from increasing too much and close to the status quo. The
>>> problem is that at a small number of CPUs (e.g. 2), 4log2(nr_cpus)
>>> will actually give a nr_zpools > nr_cpus. So we will need to come up
>>> with a more fancy magic equation (e.g. 4log2(nr_cpus/4)).
>>>
>>> (d) Make the number of zpools scale linearly with memory. This makes
>>> more sense than scaling with CPUs because increasing the number of
>>> zpools increases fragmentation, so it makes sense to limit it by the
>>> available memory. This is also more consistent with other magic
>>> numbers we have (e.g. SWAP_ADDRESS_SPACE_SHIFT).
>>>
>>> The problem is that unlike zswap trees, the zswap pool is not
>>> connected to the swapfile size, so we don't have an indication for how
>>> much memory will be in the zswap pool. We can scale the number of
>>> zpools with the entire memory on the machine during boot, but this
>>> seems like it would be difficult to figure out, and will not take into
>>> consideration memory hotplugging and the zswap global limit changing.
>>>
>>> (e) A creative mix of the above.
>>>
>>> (f) Something else (probably simpler).
>>>
>>> I am personally leaning toward (c), but I want to hear the opinions of
>>> other people here. Yu, Vlastimil, Johannes, Nhat? Anyone else?
>>>
>>> In the long-term, I think we may want to address the lock contention
>>> in zsmalloc itself instead of zswap spawning multiple zpools.
>
> Sorry, I'm sure I'm not following this discussion closely enough,
> has the lock contention been demonstrated/proved somehow? lock-stats?
Yosry has some stats in his commit b8cf32dc6e8c ("mm: zswap: multiple zpools support"),
and I have also seen some locking contention when using zram to test kernel building,
since zram still has only one pool.
>
>> Agree, I think we should try to improve locking scalability of zsmalloc.
>> I have some thoughts to share, no code or test data yet:
>>
>> 1. First, we can change the pool global lock to per-class lock, which
>> is more fine-grained.
>
> Commit c0547d0b6a4b6 "zsmalloc: consolidate zs_pool's migrate_lock
> and size_class's locks" [1] claimed no significant difference
> between class->lock and pool->lock.
Ok, I haven't looked into the history much, that seems preparation of trying
to introduce reclaim in the zsmalloc? Not sure. But now with the reclaim code
in zsmalloc has gone, should we change back to the per-class lock? Which is
obviously more fine-grained than the pool lock. Actually, I have just done it,
will test to get some data later.
Thanks.
>
> [1] https://lkml.kernel.org/r/20221128191616.1261026-4-nphamcs@gmail.com
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-06 4:46 ` Chengming Zhou
@ 2024-06-06 5:43 ` Sergey Senozhatsky
2024-06-06 5:55 ` Chengming Zhou
2024-06-07 9:40 ` Nhat Pham
0 siblings, 2 replies; 45+ messages in thread
From: Sergey Senozhatsky @ 2024-06-06 5:43 UTC (permalink / raw)
To: Chengming Zhou
Cc: Sergey Senozhatsky, Yosry Ahmed, Erhard Furtner, Yu Zhao,
linux-mm, linux-kernel, linuxppc-dev, Johannes Weiner, Nhat Pham,
Minchan Kim, Vlastimil Babka (SUSE)
On (24/06/06 12:46), Chengming Zhou wrote:
> >> Agree, I think we should try to improve locking scalability of zsmalloc.
> >> I have some thoughts to share, no code or test data yet:
> >>
> >> 1. First, we can change the pool global lock to per-class lock, which
> >> is more fine-grained.
> >
> > Commit c0547d0b6a4b6 "zsmalloc: consolidate zs_pool's migrate_lock
> > and size_class's locks" [1] claimed no significant difference
> > between class->lock and pool->lock.
>
> Ok, I haven't looked into the history much, that seems preparation of trying
> to introduce reclaim in the zsmalloc? Not sure. But now with the reclaim code
> in zsmalloc has gone, should we change back to the per-class lock? Which is
Well, the point that commit made was that Nhat (and Johannes?) were
unable to detect any impact of pool->lock on a variety of cases. So
we went on with code simplification.
> obviously more fine-grained than the pool lock. Actually, I have just done it,
> will test to get some data later.
Thanks, we'll need data on this. I'm happy to take the patch, but
jumping back and forth between class->lock and pool->lock merely
"for obvious reasons" is not what I'm extremely excited about.
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-06 5:43 ` Sergey Senozhatsky
@ 2024-06-06 5:55 ` Chengming Zhou
2024-06-07 9:40 ` Nhat Pham
1 sibling, 0 replies; 45+ messages in thread
From: Chengming Zhou @ 2024-06-06 5:55 UTC (permalink / raw)
To: Sergey Senozhatsky
Cc: Yosry Ahmed, Erhard Furtner, Yu Zhao, linux-mm, linux-kernel,
linuxppc-dev, Johannes Weiner, Nhat Pham, Minchan Kim,
Vlastimil Babka (SUSE)
On 2024/6/6 13:43, Sergey Senozhatsky wrote:
> On (24/06/06 12:46), Chengming Zhou wrote:
>>>> Agree, I think we should try to improve locking scalability of zsmalloc.
>>>> I have some thoughts to share, no code or test data yet:
>>>>
>>>> 1. First, we can change the pool global lock to per-class lock, which
>>>> is more fine-grained.
>>>
>>> Commit c0547d0b6a4b6 "zsmalloc: consolidate zs_pool's migrate_lock
>>> and size_class's locks" [1] claimed no significant difference
>>> between class->lock and pool->lock.
>>
>> Ok, I haven't looked into the history much, that seems preparation of trying
>> to introduce reclaim in the zsmalloc? Not sure. But now with the reclaim code
>> in zsmalloc has gone, should we change back to the per-class lock? Which is
>
> Well, the point that commit made was that Nhat (and Johannes?) were
> unable to detect any impact of pool->lock on a variety of cases. So
> we went on with code simplification.
Right, the code is simpler.
>
>> obviously more fine-grained than the pool lock. Actually, I have just done it,
>> will test to get some data later.
>
> Thanks, we'll need data on this. I'm happy to take the patch, but
> jumping back and forth between class->lock and pool->lock merely
> "for obvious reasons" is not what I'm extremely excited about.
Yeah, agree, we need test data.
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-05 23:41 ` Yosry Ahmed
2024-06-05 23:52 ` Yu Zhao
2024-06-06 2:49 ` Chengming Zhou
@ 2024-06-06 7:24 ` Vlastimil Babka (SUSE)
2024-06-06 13:32 ` Erhard Furtner
2024-06-06 17:14 ` Takero Funaki
3 siblings, 1 reply; 45+ messages in thread
From: Vlastimil Babka (SUSE) @ 2024-06-06 7:24 UTC (permalink / raw)
To: Yosry Ahmed, Erhard Furtner
Cc: Yu Zhao, linux-mm, linux-kernel, linuxppc-dev, Johannes Weiner,
Nhat Pham, Chengming Zhou, Sergey Senozhatsky, Minchan Kim,
Michal Hocko
On 6/6/24 1:41 AM, Yosry Ahmed wrote:
> On Wed, Jun 5, 2024 at 4:04 PM Erhard Furtner <erhard_f@mailbox.org> wrote:
>
> I am personally leaning toward (c), but I want to hear the opinions of
> other people here. Yu, Vlastimil, Johannes, Nhat? Anyone else?
Besides the zpool commit which might have just pushed the machine over the
edge, but it was probably close to it already. I've noticed a more general
problem that there are GFP_KERNEL allocations failing from kswapd. Those
could probably use be __GFP_NOMEMALLOC (or scoped variant, is there one?)
since it's the case of "allocating memory to free memory". Or use mempools
if the progress (success will lead to freeing memory) is really guaranteed.
Another interesting data point could be to see if traditional reclaim
behaves any better on this machine than MGLRU. I saw in the config:
CONFIG_LRU_GEN=y
CONFIG_LRU_GEN_ENABLED=y
So disabling at least the second one would revert to the traditional reclaim
and we could see if it handles such a constrained system better or not.
> In the long-term, I think we may want to address the lock contention
> in zsmalloc itself instead of zswap spawning multiple zpools.
>
>>
>> The patch did not apply cleanly on v6.9.3 so I applied it on v6.10-rc2. dmesg of the current v6.10-rc2 run attached.
>>
>> Regards,
>> Erhard
>
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-06 3:38 ` Yu Zhao
@ 2024-06-06 12:08 ` Michael Ellerman
2024-06-06 16:05 ` Erhard Furtner
0 siblings, 1 reply; 45+ messages in thread
From: Michael Ellerman @ 2024-06-06 12:08 UTC (permalink / raw)
To: Yu Zhao, Erhard Furtner
Cc: David Hildenbrand, linux-mm, linux-kernel, linuxppc-dev
Yu Zhao <yuzhao@google.com> writes:
> On Wed, Jun 5, 2024 at 9:12 PM Michael Ellerman <mpe@ellerman.id.au> wrote:
>>
>> David Hildenbrand <david@redhat.com> writes:
>> > On 01.06.24 08:01, Yu Zhao wrote:
>> >> On Wed, May 15, 2024 at 4:06 PM Yu Zhao <yuzhao@google.com> wrote:
>> ...
>> >>
>> >> Your system has 2GB memory and it uses zswap with zsmalloc (which is
>> >> good since it can allocate from the highmem zone) and zstd/lzo (which
>> >> doesn't matter much). Somehow -- I couldn't figure out why -- it
>> >> splits the 2GB into a 0.25GB DMA zone and a 1.75GB highmem zone:
>> >>
>> >> [ 0.000000] Zone ranges:
>> >> [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
>> >> [ 0.000000] Normal empty
>> >> [ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff]
>> >
>> > That's really odd. But we are messing with "PowerMac3,6", so I don't
>> > really know what's right or wrong ...
>>
>> The DMA zone exists because 9739ab7eda45 ("powerpc: enable a 30-bit
>> ZONE_DMA for 32-bit pmac") selects it.
>>
>> It's 768MB (not 0.25GB) because it's clamped at max_low_pfn:
>
> Right. (I meant 0.75GB.)
>
>> #ifdef CONFIG_ZONE_DMA
>> max_zone_pfns[ZONE_DMA] = min(max_low_pfn,
>> 1UL << (zone_dma_bits - PAGE_SHIFT));
>> #endif
>>
>> Which comes eventually from CONFIG_LOWMEM_SIZE, which defaults to 768MB.
>
> I see. I grep'ed VMSPLIT which is used on x86 and arm but apparently
> not on powerpc.
Those VMSPLIT configs are nice, on powerpc it's all done manually :}
>> I think it's 768MB because the user:kernel split is 3G:1G, and then the
>> kernel needs some of that 1G virtual space for vmalloc/ioremap/highmem,
>> so it splits it 768M:256M.
>>
>> Then ZONE_NORMAL is empty because it is also limited to max_low_pfn:
>>
>> max_zone_pfns[ZONE_NORMAL] = max_low_pfn;
>>
>> The rest of RAM is highmem.
>>
>> So I think that's all behaving as expected, but I don't know 32-bit /
>> highmem stuff that well so I could be wrong.
>
> Yes, the three zones work as intended.
>
> Erhard,
>
> Since your system only has 2GB memory, I'd try the 2G:2G split, which
> would in theory allow both the kernel and userspace to all memory.
>
> CONFIG_LOWMEM_SIZE_BOOL=y
> CONFIG_LOWMEM_SIZE=0x7000000
>
> (Michael, please correct me if the above wouldn't work.)
It's a bit more complicated, in order to increase LOWMEM_SIZE you need
to adjust all the other variables to make space.
To get 2G of user virtual space I think you need:
CONFIG_ADVANCED_OPTIONS=y
CONFIG_LOWMEM_SIZE_BOOL=y
CONFIG_LOWMEM_SIZE=0x60000000
CONFIG_PAGE_OFFSET_BOOL=y
CONFIG_PAGE_OFFSET=0x90000000
CONFIG_KERNEL_START_BOOL=y
CONFIG_KERNEL_START=0x90000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE_BOOL=y
CONFIG_TASK_SIZE=0x80000000
Which results in 1.5GB of lowmem.
Or if you want to map all 2G of RAM directly in the kernel without
highmem, but limit user virtual space to 1.5G:
CONFIG_ADVANCED_OPTIONS=y
CONFIG_LOWMEM_SIZE_BOOL=y
CONFIG_LOWMEM_SIZE=0x80000000
CONFIG_PAGE_OFFSET_BOOL=y
CONFIG_PAGE_OFFSET=0x70000000
CONFIG_KERNEL_START_BOOL=y
CONFIG_KERNEL_START=0x70000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE_BOOL=y
CONFIG_TASK_SIZE=0x60000000
You can also reclaim another 256MB of virtual space if you disable
CONFIG_MODULES.
Those configs do boot on qemu. But I don't have easy access to my 32-bit
machine to test if they boot on actual hardware.
cheers
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-05 23:58 ` Yosry Ahmed
@ 2024-06-06 13:28 ` Erhard Furtner
2024-06-06 16:42 ` Yosry Ahmed
0 siblings, 1 reply; 45+ messages in thread
From: Erhard Furtner @ 2024-06-06 13:28 UTC (permalink / raw)
To: Yosry Ahmed
Cc: Yu Zhao, linux-mm, linux-kernel, linuxppc-dev, Johannes Weiner,
Nhat Pham, Chengming Zhou, Sergey Senozhatsky, Minchan Kim,
Vlastimil Babka (SUSE)
On Wed, 5 Jun 2024 16:58:11 -0700
Yosry Ahmed <yosryahmed@google.com> wrote:
> On Wed, Jun 5, 2024 at 4:53 PM Yu Zhao <yuzhao@google.com> wrote:
> >
> > On Wed, Jun 5, 2024 at 5:42 PM Yosry Ahmed <yosryahmed@google.com> wrote:
> > >
> > > On Wed, Jun 5, 2024 at 4:04 PM Erhard Furtner <erhard_f@mailbox.org> wrote:
> > > >
> > > > On Tue, 4 Jun 2024 20:03:27 -0700
> > > > Yosry Ahmed <yosryahmed@google.com> wrote:
> > > >
> > > > > Could you check if the attached patch helps? It basically changes the
> > > > > number of zpools from 32 to min(32, nr_cpus).
> > > >
> > > > Thanks! The patch does not fix the issue but it helps.
> > > >
> > > > Means I still get to see the 'kswapd0: page allocation failure' in the dmesg, a 'stress-ng-vm: page allocation failure' later on, another kswapd0 error later on, etc. _but_ the machine keeps running the workload, stays usable via VNC and I get no hard crash any longer.
> > > >
> > > > Without patch kswapd0 error and hard crash (need to power-cycle) <3min. With patch several kswapd0 errors but running for 2 hrs now. I double checked this to be sure.
> > >
> > > Thanks for trying this out. This is interesting, so even two zpools is
> > > too much fragmentation for your use case.
> >
> > Now I'm a little bit skeptical that the problem is due to fragmentation.
> >
> > > I think there are multiple ways to go forward here:
> > > (a) Make the number of zpools a config option, leave the default as
> > > 32, but allow special use cases to set it to 1 or similar. This is
> > > probably not preferable because it is not clear to users how to set
> > > it, but the idea is that no one will have to set it except special use
> > > cases such as Erhard's (who will want to set it to 1 in this case).
> > >
> > > (b) Make the number of zpools scale linearly with the number of CPUs.
> > > Maybe something like nr_cpus/4 or nr_cpus/8. The problem with this
> > > approach is that with a large number of CPUs, too many zpools will
> > > start having diminishing returns. Fragmentation will keep increasing,
> > > while the scalability/concurrency gains will diminish.
> > >
> > > (c) Make the number of zpools scale logarithmically with the number of
> > > CPUs. Maybe something like 4log2(nr_cpus). This will keep the number
> > > of zpools from increasing too much and close to the status quo. The
> > > problem is that at a small number of CPUs (e.g. 2), 4log2(nr_cpus)
> > > will actually give a nr_zpools > nr_cpus. So we will need to come up
> > > with a more fancy magic equation (e.g. 4log2(nr_cpus/4)).
> > >
> > > (d) Make the number of zpools scale linearly with memory. This makes
> > > more sense than scaling with CPUs because increasing the number of
> > > zpools increases fragmentation, so it makes sense to limit it by the
> > > available memory. This is also more consistent with other magic
> > > numbers we have (e.g. SWAP_ADDRESS_SPACE_SHIFT).
> > >
> > > The problem is that unlike zswap trees, the zswap pool is not
> > > connected to the swapfile size, so we don't have an indication for how
> > > much memory will be in the zswap pool. We can scale the number of
> > > zpools with the entire memory on the machine during boot, but this
> > > seems like it would be difficult to figure out, and will not take into
> > > consideration memory hotplugging and the zswap global limit changing.
> > >
> > > (e) A creative mix of the above.
> > >
> > > (f) Something else (probably simpler).
> > >
> > > I am personally leaning toward (c), but I want to hear the opinions of
> > > other people here. Yu, Vlastimil, Johannes, Nhat? Anyone else?
> >
> > I double checked that commit and didn't find anything wrong. If we are
> > all in the mood of getting to the bottom, can we try using only 1
> > zpool while there are 2 available? I.e.,
>
> Erhard, do you mind checking if Yu's diff below to use a single zpool
> fixes the problem completely? There is also an attached patch that
> does the same thing if this is easier to apply for you.
No, setting ZSWAP_NR_ZPOOLS to 1 does not fix the problem unfortunately (that being the only patch applied on v6.10-rc2).
Trying to alter the lowmem and virtual mem limits next as Michael suggested.
Regards,
Erhard
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-06 7:24 ` Vlastimil Babka (SUSE)
@ 2024-06-06 13:32 ` Erhard Furtner
2024-06-06 16:53 ` Vlastimil Babka (SUSE)
0 siblings, 1 reply; 45+ messages in thread
From: Erhard Furtner @ 2024-06-06 13:32 UTC (permalink / raw)
To: Vlastimil Babka (SUSE)
Cc: Yosry Ahmed, Yu Zhao, linux-mm, linux-kernel, linuxppc-dev,
Johannes Weiner, Nhat Pham, Chengming Zhou, Sergey Senozhatsky,
Minchan Kim, Michal Hocko
[-- Attachment #1: Type: text/plain, Size: 1044 bytes --]
On Thu, 6 Jun 2024 09:24:56 +0200
"Vlastimil Babka (SUSE)" <vbabka@kernel.org> wrote:
> Besides the zpool commit which might have just pushed the machine over the
> edge, but it was probably close to it already. I've noticed a more general
> problem that there are GFP_KERNEL allocations failing from kswapd. Those
> could probably use be __GFP_NOMEMALLOC (or scoped variant, is there one?)
> since it's the case of "allocating memory to free memory". Or use mempools
> if the progress (success will lead to freeing memory) is really guaranteed.
>
> Another interesting data point could be to see if traditional reclaim
> behaves any better on this machine than MGLRU. I saw in the config:
>
> CONFIG_LRU_GEN=y
> CONFIG_LRU_GEN_ENABLED=y
>
> So disabling at least the second one would revert to the traditional reclaim
> and we could see if it handles such a constrained system better or not.
I set RANDOM_KMALLOC_CACHES=n and LRU_GEN_ENABLED=n but still hit the issue.
dmesg looks a bit different (unpatched v6.10-rc2).
Regards,
Erhard
[-- Attachment #2: dmesg_610-rc2_g4_lru --]
[-- Type: application/octet-stream, Size: 42878 bytes --]
[ 0.000000] Total memory = 2048MB; using 4096kB for hash table
[ 0.000000] Activating Kernel Userspace Access Protection
[ 0.000000] Activating Kernel Userspace Execution Prevention
[ 0.000000] Linux version 6.10.0-rc2-PMacG4 (root@T1000) (gcc (Gentoo 13.2.1_p20240210 p14) 13.2.1 20240210, GNU ld (Gentoo 2.42 p3) 2.42.0) #10 SMP Thu Jun 6 15:06:52 CEST 2024
[ 0.000000] ioremap() called early from pmac_feature_init+0x254/0xa7c. Use early_ioremap() instead
[ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0x24
[ 0.000000] Mapped at 0xff3bf000
[ 0.000000] ioremap() called early from probe_one_macio+0x150/0x238. Use early_ioremap() instead
[ 0.000000] Found a Keylargo mac-io controller, rev: 3, mapped at 0x(ptrval)
[ 0.000000] PowerMac motherboard: PowerMac G4 Windtunnel
[ 0.000000] ioremap() called early from btext_map+0x5c/0x7c. Use early_ioremap() instead
[ 0.000000] Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
[ 0.000000] printk: legacy bootconsole [udbg0] enabled
[ 0.000000] CPU maps initialized for 1 thread per core
[ 0.000000] (thread shift is 0)
[ 0.000000] -----------------------------------------------------
[ 0.000000] phys_mem_size = 0x80000000
[ 0.000000] dcache_bsize = 0x20
[ 0.000000] icache_bsize = 0x20
[ 0.000000] cpu_features = 0x000000002514600a
[ 0.000000] possible = 0x00000000277de00a
[ 0.000000] always = 0x0000000001000000
[ 0.000000] cpu_user_features = 0x9c000001 0x00000000
[ 0.000000] mmu_features = 0x00010201
[ 0.000000] Hash_size = 0x400000
[ 0.000000] Hash_mask = 0xffff
[ 0.000000] -----------------------------------------------------
[ 0.000000] ioremap() called early from pmac_setup_arch+0xd0/0x228. Use early_ioremap() instead
[ 0.000000] ioremap() called early from find_via_pmu+0x220/0x288. Use early_ioremap() instead
[ 0.000000] ioremap() called early from find_via_pmu+0xd4/0x288. Use early_ioremap() instead
[ 0.000000] via-pmu: Server Mode is disabled
[ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c
[ 0.000000] ioremap() called early from pmac_nvram_init+0x284/0x518. Use early_ioremap() instead
[ 0.000000] nvram: Checking bank 0...
[ 0.000000] nvram: gen0=3427, gen1=3428
[ 0.000000] nvram: Active bank is: 1
[ 0.000000] nvram: OF partition at 0x410
[ 0.000000] nvram: XP partition at 0x1020
[ 0.000000] nvram: NR partition at 0x1120
[ 0.000000] Top of RAM: 0x80000000, Total RAM: 0x80000000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
[ 0.000000] Normal empty
[ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] percpu: Embedded 14 pages/cpu s28448 r8192 d20704 u57344
[ 0.000000] pcpu-alloc: s28448 r8192 d20704 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Kernel command line: ro root=/dev/sda5 slub_debug=FZP page_poison=1 netconsole=6666@192.168.2.8/eth0,6666@192.168.2.3/A8:A1:59:16:4F:EA debug
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 524288
[ 0.000000] mem auto-init: stack:all(pattern), heap alloc:off, heap free:off, mlocked free:off
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xffbbf000..0xfffff000 : fixmap
[ 0.000000] * 0xff400000..0xff800000 : highmem PTEs
[ 0.000000] * 0xff115000..0xff400000 : early ioremap
[ 0.000000] * 0xf1000000..0xff115000 : vmalloc & ioremap
[ 0.000000] * 0xb0000000..0xc0000000 : modules
[ 0.000000] Memory: 2059124K/2097152K available (7772K kernel code, 520K rwdata, 4516K rodata, 1096K init, 278K bss, 38028K reserved, 0K cma-reserved, 1310720K highmem)
[ 0.000000] **********************************************************
[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.000000] ** **
[ 0.000000] ** This system shows unhashed kernel memory addresses **
[ 0.000000] ** via the console, logs, and other interfaces. This **
[ 0.000000] ** might reduce the security of your system. **
[ 0.000000] ** **
[ 0.000000] ** If you see this message and you are not debugging **
[ 0.000000] ** the kernel, report this immediately to your system **
[ 0.000000] ** administrator! **
[ 0.000000] ** **
[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.000000] **********************************************************
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
[ 0.000000] mpic: Resetting
[ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 2 CPUs
[ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f
[ 0.000000] mpic: Initializing for 64 sources
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] time_init: decrementer frequency = 41.658765 MHz
[ 0.000000] time_init: processor frequency = 1416.666661 MHz
[ 0.000005] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x99b97f1da, max_idle_ns: 440795202966 ns
[ 0.000555] clocksource: timebase mult[18012a56] shift[24] registered
[ 0.001051] clockevent: decrementer mult[aaa2619] shift[32] cpu[0]
[ 0.002090] Console: colour dummy device 80x25
[ 0.002553] printk: legacy console [tty0] enabled
[ 0.003013] printk: legacy bootconsole [udbg0] disabled
[ 0.003516] pid_max: default: 32768 minimum: 301
[ 0.006209] LSM: initializing lsm=capability,yama
[ 0.006247] Yama: becoming mindful.
[ 0.006943] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.006992] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.012485] PowerMac SMP probe found 2 cpus
[ 0.012793] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
[ 0.012843] channel 0 bus <multibus>
[ 0.012864] channel 1 bus <multibus>
[ 0.012968] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
[ 0.013011] channel 0 bus <multibus>
[ 0.013065] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c
[ 0.013102] channel 1 bus <multibus>
[ 0.013122] channel 2 bus <multibus>
[ 0.013146] pmf: no parser for command 17 !
[ 0.013210] Processor timebase sync using GPIO 0x73
[ 0.013224] mpic: requesting IPIs...
[ 0.013319] CPU0: L2CR is 80000000
[ 0.013333] CPU0: L3CR is 9c030000
[ 0.014951] MPC7450 family performance monitor hardware support registered
[ 0.015158] rcu: Hierarchical SRCU implementation.
[ 0.015181] rcu: Max phase no-delay instances is 1000.
[ 0.016057] smp: Bringing up secondary CPUs ...
[83973668.596068] CPU1: L2CR was 0
[83973668.596126] CPU1: L2CR set to 80000000
[83973668.596132] CPU1: L3CR was 0
[83973668.596279] CPU1: L3CR set to 9c030000
[ 0.019296] smp: Brought up 1 node, 2 CPUs
[ 0.021661] devtmpfs: initialized
[ 0.022558] Duplicate name in PowerPC,G4@0, renamed to "l2-cache#1"
[ 0.022686] Duplicate name in l2-cache#1, renamed to "l2-cache#1"
[ 0.023196] Duplicate name in PowerPC,G4@1, renamed to "l2-cache#1"
[ 0.023318] Duplicate name in l2-cache#1, renamed to "l2-cache#1"
[ 0.028919] Duplicate name in gpio@50, renamed to "gpio5@6f#1"
[ 0.029024] Duplicate name in gpio@50, renamed to "gpio6@70#1"
[ 0.029231] Duplicate name in gpio@50, renamed to "gpio11@75#1"
[ 0.029358] Duplicate name in gpio@50, renamed to "extint-gpio15@67#1"
[ 0.036215] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0
[ 0.036258] PCI host bridge /pci@f0000000 ranges:
[ 0.036295] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000
[ 0.036326] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
[ 0.036461] MEM 0x0000000090000000..0x00000000afffffff -> 0x0000000090000000
[ 0.036520] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0
[ 0.036543] PCI host bridge /pci@f2000000 (primary) ranges:
[ 0.036574] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000
[ 0.036603] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000
[ 0.036722] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000
[ 0.036785] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0
[ 0.036808] PCI host bridge /pci@f4000000 ranges:
[ 0.036838] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000
[ 0.036863] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000
[ 0.037074] Found NEC PD720100A USB2 chip with disabled EHCI, fixing up...
[ 0.037442] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.037536] futex hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.040827] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.046487] PCI: Probing PCI hardware
[ 0.047096] PCI host bridge to bus 0000:00
[ 0.047128] pci_bus 0000:00: root bus resource [io 0xff780000-0xfff7ffff] (bus address [0x0000-0x7fffff])
[ 0.047158] pci_bus 0000:00: root bus resource [mem 0xf1000000-0xf1ffffff]
[ 0.047179] pci_bus 0000:00: root bus resource [mem 0x90000000-0xafffffff]
[ 0.047203] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.047223] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.047724] pci 0000:00:0b.0: [106b:0034] type 00 class 0x060000 conventional PCI endpoint
[ 0.048383] pci 0000:00:10.0: [1002:4150] type 00 class 0x030000 conventional PCI endpoint
[ 0.048430] pci 0000:00:10.0: BAR 0 [mem 0xa0000000-0xafffffff pref]
[ 0.048455] pci 0000:00:10.0: BAR 1 [io 0xff780400-0xff7804ff]
[ 0.048479] pci 0000:00:10.0: BAR 2 [mem 0x90000000-0x9000ffff]
[ 0.048519] pci 0000:00:10.0: ROM [mem 0x90020000-0x9003ffff pref]
[ 0.048575] pci 0000:00:10.0: supports D1 D2
[ 0.049454] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.050577] OF: /pci@f2000000/mac-io@17/gpio@50/gpio5@6f: could not find phandle 1751474532
[ 0.050655] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio15@67: could not find phandle 1751474532
[ 0.050734] OF: /pci@f2000000/mac-io@17/gpio@50/gpio6@70: could not find phandle 1634562093
[ 0.050806] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio16@68: could not find phandle 1936745825
[ 0.050887] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio14@66: could not find phandle 1818848869
[ 0.050966] OF: /pci@f2000000/mac-io@17/gpio@50/gpio12@76: could not find phandle 1835103092
[ 0.051034] OF: /pci@f2000000/mac-io@17/gpio@50/gpio11@75: could not find phandle 1635083369
[ 0.051097] OF: /pci@f2000000/mac-io@17/gpio@50/gpio5@6f: could not find phandle 1751474532
[ 0.051161] OF: /pci@f2000000/mac-io@17/gpio@50/gpio6@70: could not find phandle 1634562093
[ 0.051225] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio4@5c: could not find phandle 1818848869
[ 0.051303] OF: /pci@f2000000/mac-io@17/gpio@50/gpio11@75: could not find phandle 1635083369
[ 0.051367] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio15@67: could not find phandle 1751474532
[ 0.052763] pci_bus 0001:00: Fixed dependency cycle(s) with /pci@f2000000/mac-io@17/interrupt-controller@40000
[ 0.052879] PCI host bridge to bus 0001:00
[ 0.052897] pci_bus 0001:00: root bus resource [io 0x0000-0x7fffff]
[ 0.052919] pci_bus 0001:00: root bus resource [mem 0xf3000000-0xf3ffffff]
[ 0.052940] pci_bus 0001:00: root bus resource [mem 0x80000000-0x8fffffff]
[ 0.052962] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.052981] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.053449] pci 0001:00:0b.0: [106b:0035] type 00 class 0x060000 conventional PCI endpoint
[ 0.054034] pci 0001:00:12.0: [1033:0035] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.054077] pci 0001:00:12.0: BAR 0 [mem 0x8008c000-0x8008cfff]
[ 0.054155] pci 0001:00:12.0: supports D1 D2
[ 0.054172] pci 0001:00:12.0: PME# supported from D0 D1 D2 D3hot
[ 0.054627] pci 0001:00:12.1: [1033:0035] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.054670] pci 0001:00:12.1: BAR 0 [mem 0x8008b000-0x8008bfff]
[ 0.054747] pci 0001:00:12.1: supports D1 D2
[ 0.054764] pci 0001:00:12.1: PME# supported from D0 D1 D2 D3hot
[ 0.055080] pci 0001:00:12.2: [1033:00e0] type 00 class 0x0c0320 conventional PCI endpoint
[ 0.055122] pci 0001:00:12.2: BAR 0 [mem 0x80081000-0x800810ff]
[ 0.055198] pci 0001:00:12.2: supports D1 D2
[ 0.055214] pci 0001:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.055559] pci 0001:00:13.0: [1095:3112] type 00 class 0x018000 conventional PCI endpoint
[ 0.055600] pci 0001:00:13.0: BAR 0 [io 0x0460-0x0467]
[ 0.055622] pci 0001:00:13.0: BAR 1 [io 0x0450-0x0453]
[ 0.055644] pci 0001:00:13.0: BAR 2 [io 0x0440-0x0447]
[ 0.055666] pci 0001:00:13.0: BAR 3 [io 0x0430-0x0433]
[ 0.055688] pci 0001:00:13.0: BAR 4 [io 0x0420-0x042f]
[ 0.055710] pci 0001:00:13.0: BAR 5 [mem 0x80082000-0x800821ff]
[ 0.055733] pci 0001:00:13.0: ROM [mem 0x80100000-0x8017ffff pref]
[ 0.055782] pci 0001:00:13.0: supports D1 D2
[ 0.056157] pci 0001:00:15.0: [9710:9865] type 00 class 0x070002 conventional PCI endpoint
[ 0.056200] pci 0001:00:15.0: BAR 0 [io 0x0410-0x0417]
[ 0.056222] pci 0001:00:15.0: BAR 1 [mem 0x8008a000-0x8008afff]
[ 0.056255] pci 0001:00:15.0: BAR 4 [mem 0x80089000-0x80089fff]
[ 0.056316] pci 0001:00:15.0: supports D1 D2
[ 0.056332] pci 0001:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.056659] pci 0001:00:15.1: [9710:9865] type 00 class 0x070002 conventional PCI endpoint
[ 0.056700] pci 0001:00:15.1: BAR 0 [io 0x0400-0x0407]
[ 0.056722] pci 0001:00:15.1: BAR 1 [mem 0x80088000-0x80088fff]
[ 0.056755] pci 0001:00:15.1: BAR 4 [mem 0x80087000-0x80087fff]
[ 0.056815] pci 0001:00:15.1: supports D1 D2
[ 0.056831] pci 0001:00:15.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.057280] pci 0001:00:15.2: [ffff:9865] type 00 class 0x070103 conventional PCI endpoint
[ 0.057322] pci 0001:00:15.2: BAR 0 [io 0x0000-0x0007]
[ 0.057344] pci 0001:00:15.2: BAR 1 [io 0x0000-0x0007]
[ 0.057367] pci 0001:00:15.2: BAR 2 [mem 0x00000000-0x00000fff]
[ 0.057394] pci 0001:00:15.2: BAR 4 [mem 0x00000000-0x00000fff]
[ 0.057454] pci 0001:00:15.2: supports D1 D2
[ 0.057470] pci 0001:00:15.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.057781] pci 0001:00:16.0: [14e4:4320] type 00 class 0x028000 conventional PCI endpoint
[ 0.057822] pci 0001:00:16.0: BAR 0 [mem 0x8008e000-0x8008ffff]
[ 0.057897] pci 0001:00:16.0: supports D1 D2
[ 0.057913] pci 0001:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.058217] pci 0001:00:17.0: [106b:0022] type 00 class 0xff0000 conventional PCI endpoint
[ 0.058258] pci 0001:00:17.0: BAR 0 [mem 0x80000000-0x8007ffff]
[ 0.058743] pci 0001:00:18.0: [106b:0019] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.058785] pci 0001:00:18.0: BAR 0 [mem 0x80086000-0x80086fff]
[ 0.059124] pci 0001:00:19.0: [106b:0019] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.059165] pci 0001:00:19.0: BAR 0 [mem 0x80085000-0x80085fff]
[ 0.059686] pci 0001:00:1b.0: [1033:0035] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.059730] pci 0001:00:1b.0: BAR 0 [mem 0x80084000-0x80084fff]
[ 0.059807] pci 0001:00:1b.0: supports D1 D2
[ 0.059824] pci 0001:00:1b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.060163] pci 0001:00:1b.1: [1033:0035] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.060205] pci 0001:00:1b.1: BAR 0 [mem 0x80083000-0x80083fff]
[ 0.060281] pci 0001:00:1b.1: supports D1 D2
[ 0.060298] pci 0001:00:1b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.060617] pci 0001:00:1b.2: [1033:00e0] type 00 class 0x0c0320 conventional PCI endpoint
[ 0.060658] pci 0001:00:1b.2: BAR 0 [mem 0x80080000-0x800800ff]
[ 0.060734] pci 0001:00:1b.2: supports D1 D2
[ 0.060750] pci 0001:00:1b.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.061176] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.062902] PCI host bridge to bus 0002:00
[ 0.062935] pci_bus 0002:00: root bus resource [io 0x880000-0x107ffff] (bus address [0x0000-0x7fffff])
[ 0.062962] pci_bus 0002:00: root bus resource [mem 0xf5000000-0xf5ffffff]
[ 0.062985] pci_bus 0002:00: root bus resource [bus 00-ff]
[ 0.063004] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.063475] pci 0002:00:0b.0: [106b:0036] type 00 class 0x060000 conventional PCI endpoint
[ 0.063962] pci 0002:00:0d.0: [106b:0033] type 00 class 0xff0000 conventional PCI endpoint
[ 0.064005] pci 0002:00:0d.0: BAR 0 [mem 0xf5004000-0xf5007fff]
[ 0.064481] pci 0002:00:0e.0: [106b:0031] type 00 class 0x0c0010 conventional PCI endpoint
[ 0.064523] pci 0002:00:0e.0: BAR 0 [mem 0xf5000000-0xf5000fff]
[ 0.064593] pci 0002:00:0e.0: supports D1 D2
[ 0.064609] pci 0002:00:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.064952] pci 0002:00:0f.0: [106b:0032] type 00 class 0x020000 conventional PCI endpoint
[ 0.064993] pci 0002:00:0f.0: BAR 0 [mem 0xf5200000-0xf53fffff]
[ 0.065042] pci 0002:00:0f.0: ROM [mem 0xf5100000-0xf51fffff pref]
[ 0.065927] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.066382] PCI 0000:00 Cannot reserve Legacy IO [io 0xff780000-0xff780fff]
[ 0.066418] PCI 0001:00 Cannot reserve Legacy IO [io 0x0000-0x0fff]
[ 0.066452] pci_bus 0000:00: resource 4 [io 0xff780000-0xfff7ffff]
[ 0.066472] pci_bus 0000:00: resource 5 [mem 0xf1000000-0xf1ffffff]
[ 0.066491] pci_bus 0000:00: resource 6 [mem 0x90000000-0xafffffff]
[ 0.066529] pci 0001:00:15.2: BAR 2 [mem 0xf3000000-0xf3000fff]: assigned
[ 0.066554] pci 0001:00:15.2: BAR 4 [mem 0xf3001000-0xf3001fff]: assigned
[ 0.066577] pci 0001:00:15.2: BAR 0 [io 0x1000-0x1007]: assigned
[ 0.066598] pci 0001:00:15.2: BAR 1 [io 0x1008-0x100f]: assigned
[ 0.066632] pci_bus 0001:00: resource 4 [io 0x0000-0x7fffff]
[ 0.066651] pci_bus 0001:00: resource 5 [mem 0xf3000000-0xf3ffffff]
[ 0.066670] pci_bus 0001:00: resource 6 [mem 0x80000000-0x8fffffff]
[ 0.066691] pci_bus 0002:00: resource 4 [io 0x880000-0x107ffff]
[ 0.066710] pci_bus 0002:00: resource 5 [mem 0xf5000000-0xf5ffffff]
[ 0.128926] raid6: altivecx8 gen() 3316 MB/s
[ 0.185693] raid6: altivecx4 gen() 3420 MB/s
[ 0.242448] raid6: altivecx2 gen() 3180 MB/s
[ 0.299201] raid6: altivecx1 gen() 2442 MB/s
[ 0.356009] raid6: int32x8 gen() 353 MB/s
[ 0.412727] raid6: int32x4 gen() 449 MB/s
[ 0.469490] raid6: int32x2 gen() 826 MB/s
[ 0.526247] raid6: int32x1 gen() 547 MB/s
[ 0.526262] raid6: using algorithm altivecx4 gen() 3420 MB/s
[ 0.526278] raid6: using intx1 recovery algorithm
[ 0.528503] SCSI subsystem initialized
[ 0.529007] libata version 3.00 loaded.
[ 0.529273] usbcore: registered new interface driver usbfs
[ 0.529438] usbcore: registered new interface driver hub
[ 0.529539] usbcore: registered new device driver usb
[ 0.532217] pci 0000:00:10.0: vgaarb: setting as boot VGA device
[ 0.532254] pci 0000:00:10.0: vgaarb: bridge control possible
[ 0.532271] pci 0000:00:10.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
[ 0.532320] vgaarb: loaded
[ 0.532620] clocksource: Switched to clocksource timebase
[ 0.554845] NET: Registered PF_INET protocol family
[ 0.555527] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.558541] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 10240 bytes, linear)
[ 0.559419] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.560079] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.561850] TCP bind hash table entries: 8192 (order: 6, 327680 bytes, linear)
[ 0.562379] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.563050] UDP hash table entries: 512 (order: 2, 24576 bytes, linear)
[ 0.563231] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes, linear)
[ 0.563897] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.564199] pci 0001:00:12.0: enabling device (0000 -> 0002)
[ 0.564289] pci 0001:00:12.1: enabling device (0000 -> 0002)
[ 0.564339] pci 0001:00:12.2: enabling device (0004 -> 0006)
[ 0.564416] Apple USB OHCI 0001:00:18.0 disabled by firmware
[ 0.564434] pci 0001:00:18.0: Can't enable PCI device, BIOS handoff failed.
[ 0.564458] Apple USB OHCI 0001:00:19.0 disabled by firmware
[ 0.564473] pci 0001:00:19.0: Can't enable PCI device, BIOS handoff failed.
[ 0.564501] pci 0001:00:1b.0: enabling device (0000 -> 0002)
[ 0.564548] pci 0001:00:1b.1: enabling device (0000 -> 0002)
[ 0.564594] pci 0001:00:1b.2: enabling device (0004 -> 0006)
[ 0.564654] pci 0002:00:0f.0: CLS mismatch (32 != 1020), using 32 bytes
[ 0.565656] Thermal assist unit not available
[ 0.567988] Initialise system trusted keyrings
[ 0.568288] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 0.579720] 9p: Installing v9fs 9p2000 file system support
[ 0.580436] NET: Registered PF_ALG protocol family
[ 0.580519] xor: measuring software checksum speed
[ 0.589089] 8regs : 1155 MB/sec
[ 0.599188] 8regs_prefetch : 976 MB/sec
[ 0.607293] 32regs : 1215 MB/sec
[ 0.616530] 32regs_prefetch : 1066 MB/sec
[ 0.618634] altivec : 4710 MB/sec
[ 0.618649] xor: using function: altivec (4710 MB/sec)
[ 0.618678] Key type asymmetric registered
[ 0.618692] Asymmetric key parser 'x509' registered
[ 0.624517] bounce: pool size: 64 pages
[ 0.624923] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.625195] io scheduler bfq registered
[ 0.630190] Using unsupported 1920x1080 (null) at a0008000, depth=8, pitch=2048
[ 0.671657] Console: switching to colour frame buffer device 240x67
[ 0.711924] fb0: Open Firmware frame buffer device on /pci@f0000000/ATY,AlteracParent@10/ATY,Alterac_A@0
[ 0.712827] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.716059] serial 0001:00:15.0: enabling device (0004 -> 0007)
[ 0.717224] 0001:00:15.0: ttyS0 at I/O 0x410 (irq = 58, base_baud = 115200) is a 16550A
[ 0.717921] serial 0001:00:15.1: enabling device (0004 -> 0007)
[ 0.718990] 0001:00:15.1: ttyS1 at I/O 0x400 (irq = 58, base_baud = 115200) is a 16550A
[ 0.721208] MacIO PCI driver attached to Keylargo chipset
[ 0.727611] sata_sil 0001:00:13.0: version 2.4
[ 0.727919] sata_sil 0001:00:13.0: enabling device (0004 -> 0007)
[ 0.730335] scsi host0: sata_sil
[ 0.731550] scsi host1: sata_sil
[ 0.732024] ata1: SATA max UDMA/100 mmio m512@0x80082000 tf 0x80082080 irq 53 lpm-pol 0
[ 0.732276] ata2: SATA max UDMA/100 mmio m512@0x80082000 tf 0x800820c0 irq 53 lpm-pol 0
[ 0.733088] pata-pci-macio 0002:00:0d.0: enabling device (0004 -> 0006)
[ 0.749298] pata-pci-macio 0002:00:0d.0: Activating pata-macio chipset UniNorth ATA-6, Apple bus ID 3
[ 0.751198] scsi host2: pata_macio
[ 0.751696] ata3: PATA max UDMA/100 irq 39 lpm-pol 0
[ 1.045653] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1.046342] ata1.00: ATA-9: SanDisk SSD PLUS 240GB, UF4500RL, max UDMA/133
[ 1.046566] ata1.00: 468877312 sectors, multi 1: LBA48 NCQ (depth 0/32)
[ 1.047917] ata1.00: Features: Dev-Sleep
[ 1.073132] ata1.00: configured for UDMA/100
[ 1.074123] scsi 0:0:0:0: Direct-Access ATA SanDisk SSD PLUS 00RL PQ: 0 ANSI: 5
[ 1.076797] sd 0:0:0:0: [sda] 468877312 512-byte logical blocks: (240 GB/224 GiB)
[ 1.077104] sd 0:0:0:0: [sda] Write Protect is off
[ 1.077267] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.077509] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.077929] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 1.081464] sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[ 1.083867] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.499309] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1.501893] ata2.00: ATA-9: WDC WD5000LPLX-60ZNTT1, 02.01A02, max UDMA/133
[ 1.502115] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 1.504812] ata2.00: configured for UDMA/100
[ 1.505583] scsi 1:0:0:0: Direct-Access ATA WDC WD5000LPLX-6 1A02 PQ: 0 ANSI: 5
[ 1.508185] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.508441] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1.508669] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.508829] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.509066] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.509515] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
[ 1.789296] pata-macio 0.0001f000:ata-4: Activating pata-macio chipset KeyLargo ATA-4, Apple bus ID 2
[ 1.800124] scsi host3: pata_macio
[ 1.809668] ata4: PATA max UDMA/66 irq 19 lpm-pol 0
[ 1.975239] ata4.00: CFA: DeLOCK 54143 512MB, 100511E, max UDMA/66
[ 1.984495] ata4.00: 1009008 sectors, multi 1: LBA
[ 2.182193] sdb: [mac] sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8
[ 2.193832] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.203743] scsi 3:0:0:0: Direct-Access ATA DeLOCK 54143 512 11E PQ: 0 ANSI: 5
[ 2.215150] sd 3:0:0:0: [sdc] 1009008 512-byte logical blocks: (517 MB/493 MiB)
[ 2.224605] sd 3:0:0:0: [sdc] Write Protect is off
[ 2.233897] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.243238] sd 3:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.252885] sd 3:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
[ 2.265196] sdc: [mac] sdc1 sdc2 sdc3 sdc4 sdc5 sdc6
[ 2.276499] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 2.855979] pata-macio 0.00020000:ata-3: Activating pata-macio chipset KeyLargo ATA-3, Apple bus ID 0
[ 2.867487] scsi host4: pata_macio
[ 2.877759] ata5: PATA max MWDMA2 irq 20 lpm-pol 0
[ 2.887994] sungem.c:v1.0 David S. Miller <davem@redhat.com>
[ 2.899465] gem 0002:00:0f.0 eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0a:95:9c:76:3a
[ 2.911130] ehci-pci 0001:00:12.2: EHCI Host Controller
[ 2.921251] ehci-pci 0001:00:12.2: new USB bus registered, assigned bus number 1
[ 2.931463] ehci-pci 0001:00:12.2: irq 52, io mem 0x80081000
[ 2.939439] rtc-generic rtc-generic: registered as rtc0
[ 2.951812] PowerMac i2c bus pmu 2 registered
[ 2.961966] PowerMac i2c bus pmu 1 registered
[ 2.962626] ehci-pci 0001:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.972230] PowerMac i2c bus mac-io 0 registered
[ 2.981594] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10
[ 2.991048] i2c i2c-2: No i2c address for /pci@f2000000/mac-io@17/i2c@18000/i2c-modem
[ 3.000543] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.010586] PowerMac i2c bus uni-n 1 registered
[ 3.019961] usb usb1: Product: EHCI Host Controller
[ 3.019971] usb usb1: Manufacturer: Linux 6.10.0-rc2-PMacG4 ehci_hcd
[ 3.029586] i2c i2c-3: i2c-powermac: modalias failure on /uni-n@f8000000/i2c@f8001000/cereal@1c0
[ 3.039173] usb usb1: SerialNumber: 0001:00:12.2
[ 3.056735] hub 1-0:1.0: USB hub found
[ 3.059036] PowerMac i2c bus uni-n 0 registered
[ 3.068639] hub 1-0:1.0: 5 ports detected
[ 3.079661] hid: raw HID events driver (C) Jiri Kosina
[ 3.090064] ehci-pci 0001:00:1b.2: EHCI Host Controller
[ 3.098502] ata5.00: ATAPI: _NEC DVD_RW ND-3520A, 1.04, max UDMA/33
[ 3.108128] ehci-pci 0001:00:1b.2: new USB bus registered, assigned bus number 2
[ 3.118356] usbcore: registered new interface driver usbhid
[ 3.128215] ehci-pci 0001:00:1b.2: irq 63, io mem 0x80080000
[ 3.137474] usbhid: USB HID core driver
[ 3.138913] NET: Registered PF_INET6 protocol family
[ 3.159302] ehci-pci 0001:00:1b.2: USB 2.0 started, EHCI 1.00
[ 3.180615] Segment Routing with IPv6
[ 3.186977] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10
[ 3.196709] In-situ OAM (IOAM) with IPv6
[ 3.206359] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.217415] 9pnet: Installing 9P2000 support
[ 3.226393] usb usb2: Product: EHCI Host Controller
[ 3.226403] usb usb2: Manufacturer: Linux 6.10.0-rc2-PMacG4 ehci_hcd
[ 3.226410] usb usb2: SerialNumber: 0001:00:1b.2
[ 3.236487] scsi 4:0:0:0: CD-ROM _NEC DVD_RW ND-3520A 1.04 PQ: 0 ANSI: 5
[ 3.247340] hub 2-0:1.0: USB hub found
[ 3.256924] drmem: No dynamic reconfiguration memory found
[ 3.266421] hub 2-0:1.0: 5 ports detected
[ 3.294846] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 3.317452] registered taskstats version 1
[ 3.329797] Loading compiled-in X.509 certificates
[ 3.341027] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 3.351183] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.391308] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 3.461628] zswap: loaded using pool lzo/zsmalloc
[ 3.471978] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers
[ 3.482361] page_owner is disabled
[ 3.514192] Btrfs loaded, zoned=no, fsverity=no
[ 4.289855] input: PMU as /devices/virtual/input/input0
[ 4.300500] netpoll: netconsole: local port 6666
[ 4.310449] netpoll: netconsole: local IPv4 address 192.168.2.8
[ 4.320361] netpoll: netconsole: interface 'eth0'
[ 4.330169] netpoll: netconsole: remote port 6666
[ 4.330177] netpoll: netconsole: remote IPv4 address 192.168.2.3
[ 4.330184] netpoll: netconsole: remote ethernet address a8:a1:59:16:4f:ea
[ 4.359476] netpoll: netconsole: device eth0 not up yet, forcing it
[ 4.446351] sungem_phy: PHY ID: 2060e1, addr: 0
[ 4.456182] gem 0002:00:0f.0 eth0: Found BCM5421 PHY
[ 8.136297] gem 0002:00:0f.0 eth0: Link is up at 1000 Mbps, full-duplex
[ 8.145975] gem 0002:00:0f.0 eth0: Pause is enabled (rxfifo: 10240 off: 7168 on: 5632)
[ 8.147320] printk: legacy console [netcon0] enabled
[ 8.172520] netconsole: network logging started
[ 8.197648] EXT4-fs (sda5): mounted filesystem fa07e66f-b4f9-404f-85d8-487d3c097aec ro with ordered data mode. Quota mode: disabled.
[ 8.207687] VFS: Mounted root (ext4 filesystem) readonly on device 8:5.
[ 8.221295] devtmpfs: mounted
[ 8.233096] Freeing unused kernel image (initmem) memory: 1096K
[ 8.248555] Checked W+X mappings: passed, no W+X pages found
[ 8.258338] rodata_test: all tests were successful
[ 8.268000] Run /sbin/init as init process
[ 8.277570] with arguments:
[ 8.287168] /sbin/init
[ 8.296680] with environment:
[ 8.306131] HOME=/
[ 8.315424] TERM=linux
[ 12.550140] ohci-pci 0001:00:12.0: OHCI PCI host controller
[ 12.581044] ohci-pci 0001:00:12.0: new USB bus registered, assigned bus number 3
[ 12.591482] ohci-pci 0001:00:12.0: irq 52, io mem 0x8008c000
[ 12.831894] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[ 12.840171] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.848291] usb usb3: Product: OHCI PCI host controller
[ 12.856362] usb usb3: Manufacturer: Linux 6.10.0-rc2-PMacG4 ohci_hcd
[ 12.864428] usb usb3: SerialNumber: 0001:00:12.0
[ 12.923990] hub 3-0:1.0: USB hub found
[ 12.932077] hub 3-0:1.0: 3 ports detected
[ 12.960444] ohci-pci 0001:00:12.1: OHCI PCI host controller
[ 13.021211] ohci-pci 0001:00:12.1: new USB bus registered, assigned bus number 4
[ 13.032803] [drm] radeon kernel modesetting enabled.
[ 13.053393] Console: switching to colour dummy device 80x25
[ 13.054946] ohci-pci 0001:00:12.1: irq 52, io mem 0x8008b000
[ 13.058187] radeon 0000:00:10.0: enabling device (0006 -> 0007)
[ 13.060504] [drm] initializing kernel modesetting (RV350 0x1002:0x4150 0x1002:0x0002 0x00).
[ 13.060572] [drm] Forcing AGP to PCI mode
[ 13.060698] radeon 0000:00:10.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0x0000
[ 13.140584] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[ 13.140658] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.140697] usb usb4: Product: OHCI PCI host controller
[ 13.140727] usb usb4: Manufacturer: Linux 6.10.0-rc2-PMacG4 ohci_hcd
[ 13.140759] usb usb4: SerialNumber: 0001:00:12.1
[ 13.141103] [drm] Generation 2 PCI interface, using max accessible memory
[ 13.141148] radeon 0000:00:10.0: VRAM: 256M 0x00000000A0000000 - 0x00000000AFFFFFFF (256M used)
[ 13.141189] radeon 0000:00:10.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
[ 13.141344] [drm] Detected VRAM RAM=256M, BAR=256M
[ 13.141375] [drm] RAM width 128bits DDR
[ 13.142667] hub 4-0:1.0: USB hub found
[ 13.142856] hub 4-0:1.0: 2 ports detected
[ 13.143728] [drm] radeon: 256M of VRAM memory ready
[ 13.143774] [drm] radeon: 512M of GTT memory ready.
[ 13.143890] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 13.150167] Apple USB OHCI 0001:00:18.0 disabled by firmware
[ 13.150278] Apple USB OHCI 0001:00:19.0 disabled by firmware
[ 13.151701] ohci-pci 0001:00:1b.0: OHCI PCI host controller
[ 13.151802] ohci-pci 0001:00:1b.0: new USB bus registered, assigned bus number 5
[ 13.152035] ohci-pci 0001:00:1b.0: irq 63, io mem 0x80084000
[ 13.155088] [drm] radeon: 1 quad pipes, 1 Z pipes initialized
[ 13.155160] [drm] PCI GART of 512M enabled (table at 0x0000000003480000).
[ 13.155454] radeon 0000:00:10.0: WB enabled
[ 13.155500] radeon 0000:00:10.0: fence driver on ring 0 use gpu addr 0x0000000080000000
[ 13.157437] [drm] radeon: irq initialized.
[ 13.157549] [drm] Loading R300 Microcode
[ 13.230032] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[ 13.230144] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.230185] usb usb5: Product: OHCI PCI host controller
[ 13.230215] usb usb5: Manufacturer: Linux 6.10.0-rc2-PMacG4 ohci_hcd
[ 13.230280] usb usb5: SerialNumber: 0001:00:1b.0
[ 13.237462] hub 5-0:1.0: USB hub found
[ 13.237684] hub 5-0:1.0: 3 ports detected
[ 13.241087] ohci-pci 0001:00:1b.1: OHCI PCI host controller
[ 13.241214] ohci-pci 0001:00:1b.1: new USB bus registered, assigned bus number 6
[ 13.246109] ohci-pci 0001:00:1b.1: irq 63, io mem 0x80083000
[ 13.331419] [drm] radeon: ring at 0x0000000080001000
[ 13.331567] [drm] ring test succeeded in 1 usecs
[ 13.352747] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[ 13.352871] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.352934] usb usb6: Product: OHCI PCI host controller
[ 13.352969] usb usb6: Manufacturer: Linux 6.10.0-rc2-PMacG4 ohci_hcd
[ 13.353000] usb usb6: SerialNumber: 0001:00:1b.1
[ 13.355280] hub 6-0:1.0: USB hub found
[ 13.355565] hub 6-0:1.0: 2 ports detected
[ 13.356525] [drm] ib test succeeded in 0 usecs
[ 13.356825] stackdepot: allocating hash table of 65536 entries via kvcalloc
[ 13.372416] [drm] Radeon Display Connectors
[ 13.372489] [drm] Connector 0:
[ 13.372515] [drm] DVI-I-1
[ 13.372539] [drm] HPD2
[ 13.372594] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 13.372679] [drm] Encoders:
[ 13.372704] [drm] CRT1: INTERNAL_DAC1
[ 13.372731] [drm] DFP2: INTERNAL_DVO1
[ 13.372756] [drm] Connector 1:
[ 13.372781] [drm] DVI-I-2
[ 13.372805] [drm] HPD1
[ 13.372829] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 13.372861] [drm] Encoders:
[ 13.372898] [drm] CRT2: INTERNAL_DAC2
[ 13.372926] [drm] DFP1: INTERNAL_TMDS1
[ 13.374031] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:10.0 on minor 0
[ 13.629892] [drm] fb mappable at 0xA0040000
[ 13.629992] [drm] vram apper at 0xA0000000
[ 13.630053] [drm] size 8294400
[ 13.630077] [drm] fb depth is 24
[ 13.630106] [drm] pitch is 7680
[ 13.662793] ADM1030 fan controller [@2c]
[ 13.666587] DS1775 digital thermometer [@49]
[ 13.666647] Temp: 57.5 C
[ 13.666655] Hyst: 70.0 C
[ 13.666684] OS: 75.0 C
[ 13.666711]
[ 13.748498] gem 0002:00:0f.0 enP2p0s15: renamed from eth0 (while UP)
[ 13.793584] Console: switching to colour frame buffer device 240x67
[ 13.878162] radeon 0000:00:10.0: [drm] fb0: radeondrmfb frame buffer device
[ 15.029472] EXT4-fs (sda5): re-mounted fa07e66f-b4f9-404f-85d8-487d3c097aec r/w. Quota mode: disabled.
[ 15.122880] EXT4-fs (sda5): re-mounted fa07e66f-b4f9-404f-85d8-487d3c097aec r/w. Quota mode: disabled.
[ 15.616936] random: crng init done
[ 15.641498] Adding 8388604k swap on /dev/sdb6. Priority:-2 extents:1 across:8388604k
[ 15.882049] EXT4-fs (sdc5): mounting ext2 file system using the ext4 subsystem
[ 15.887585] EXT4-fs (sdc5): mounted filesystem e4e8af9e-0f0d-44f9-b983-71bf61d782de r/w without journal. Quota mode: disabled.
[ 15.888232] ext2 filesystem being mounted at /boot supports timestamps until 2038-01-19 (0x7fffffff)
[ 15.890495] BTRFS: device label tmp devid 1 transid 4954 /dev/sda6 (8:6) scanned by mount (876)
[ 15.892851] BTRFS info (device sda6): first mount of filesystem 65162d91-887e-4e48-a356-fbf7093eefb5
[ 15.893281] BTRFS info (device sda6): using xxhash64 (xxhash64-generic) checksum algorithm
[ 15.893641] BTRFS info (device sda6): using free-space-tree
[ 102.887650] CPU-temp: 58.8 C
[ 102.887680] , Case: 35.7 C
[ 102.887851] , Fan: 5 (tuned +1)
[ 126.345116] kswapd0: page allocation failure: order:0, mode:0xcc0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0
[ 126.345779] CPU: 0 PID: 40 Comm: kswapd0 Not tainted 6.10.0-rc2-PMacG4 #10
[ 126.346062] Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
[ 126.346299] Call Trace:
[ 126.346410] [c13a3980] [c0770974] dump_stack_lvl+0x70/0x8c (unreliable)
[ 126.346712] [c13a39a0] [c01ae6dc] warn_alloc+0x100/0x178
[ 126.346955] [c13a3a00] [c01aeac4] __alloc_pages_noprof+0x370/0x8d0
[ 126.347231] [c13a3ac0] [c01bc6c0] __read_swap_cache_async+0xc0/0x1cc
[ 126.347506] [c13a3b10] [c01c2ed0] zswap_writeback_entry+0x50/0x154
[ 126.347767] [c13a3c10] [c01c3044] shrink_memcg_cb+0x70/0xec
[ 126.348001] [c13a3c40] [c018d2c0] __list_lru_walk_one+0xa0/0x154
[ 126.348256] [c13a3ca0] [c018d3d8] list_lru_walk_one+0x64/0x7c
[ 126.348495] [c13a3cd0] [c01c2874] zswap_shrinker_scan+0xac/0xc4
[ 126.348746] [c13a3d00] [c01786b0] do_shrink_slab+0x18c/0x2f4
[ 126.348985] [c13a3d50] [c0178bb4] shrink_slab+0x174/0x260
[ 126.349207] [c13a3dd0] [c0176afc] shrink_node+0x758/0x850
[ 126.349436] [c13a3e50] [c0176f34] balance_pgdat+0x340/0x650
[ 126.349670] [c13a3f50] [c017746c] kswapd+0x228/0x25c
[ 126.349881] [c13a3fc0] [c0064738] kthread+0xe4/0xe8
[ 126.350094] [c13a3ff0] [c0015304] start_kernel_thread+0x10/0x14
[ 126.350476] Mem-Info:
[ 126.350595] active_anon:3729 inactive_anon:476741 isolated_anon:0
[ 126.350595] active_file:4318 inactive_file:4585 isolated_file:0
[ 126.350595] unevictable:4 dirty:2 writeback:2
[ 126.350595] slab_reclaimable:1350 slab_unreclaimable:5384
[ 126.350595] mapped:8161 shmem:687 pagetables:753
[ 126.350595] sec_pagetables:0 bounce:0
[ 126.350595] kernel_misc_reclaimable:0
[ 126.350595] free:2742 free_pcp:182 free_cma:0
[ 126.352082] Node 0 active_anon:14916kB inactive_anon:1906960kB active_file:17272kB inactive_file:18356kB unevictable:16kB isolated(anon):0kB isolated(file):0kB mapped:32644kB dirty:16kB writeback:8kB shmem:2748kB writeback_tmp:0kB kernel_stack:1008kB pagetables:3012kB sec_pagetables:0kB all_unreclaimable? no
[ 126.353306] DMA free:0kB boost:7780kB min:11240kB low:12104kB high:12968kB reserved_highatomic:0KB active_anon:176kB inactive_anon:700508kB active_file:360kB inactive_file:2196kB unevictable:0kB writepending:8kB present:786432kB managed:749500kB mlocked:0kB bounce:0kB free_pcp:728kB local_pcp:728kB free_cma:0kB
[ 126.354393] lowmem_reserve[]: 0 0 1280 0
[ 126.354601] DMA: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 0kB
[ 126.355088] 9781 total pagecache pages
[ 126.355266] 183 pages in swap cache
[ 126.355433] Free swap = 8350420kB
[ 126.355615] Total swap = 8388604kB
[ 126.355832] 524288 pages RAM
[ 126.355968] 327680 pages HighMem/MovableOnly
[ 126.356153] 9233 pages reserved
[ 143.422858] CPU-temp: 59.2 C
[ 143.422886] , Case: 35.8 C
[ 143.423067] , Fan: 6 (tuned +1)
[ 216.144869] RPC: Registered named UNIX socket transport module.
[ 216.145207] RPC: Registered udp transport module.
[ 216.145431] RPC: Registered tcp transport module.
[ 216.145652] RPC: Registered tcp-with-tls transport module.
[ 216.145949] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 216.226187] Key type dns_resolver registered
[ 216.263666] NFS: Registering the id_resolver key type
[ 216.264093] Key type id_resolver registered
[ 216.264321] Key type id_legacy registered
[ 248.104352] BTRFS info (device sda6): last unmount of filesystem 65162d91-887e-4e48-a356-fbf7093eefb5
[ 248.213206] EXT4-fs (sdc5): unmounting filesystem e4e8af9e-0f0d-44f9-b983-71bf61d782de.
[ 248.793495] CPU-temp: 59.6 C
[ 248.793526] , Case: 36.0 C
[ 248.805573] , Fan: 7 (tuned +1)
[ 250.740399] elogind-daemon[1511]: Received signal 15 [TERM]
[ 251.321034] EXT4-fs (sda5): re-mounted fa07e66f-b4f9-404f-85d8-487d3c097aec ro. Quota mode: disabled.
[ 251.467013] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 251.484097] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 251.500374] reboot: Restarting system
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-06 12:08 ` Michael Ellerman
@ 2024-06-06 16:05 ` Erhard Furtner
0 siblings, 0 replies; 45+ messages in thread
From: Erhard Furtner @ 2024-06-06 16:05 UTC (permalink / raw)
To: Michael Ellerman
Cc: Yu Zhao, David Hildenbrand, linux-mm, linux-kernel, linuxppc-dev
[-- Attachment #1: Type: text/plain, Size: 1538 bytes --]
On Thu, 06 Jun 2024 22:08:40 +1000
Michael Ellerman <mpe@ellerman.id.au> wrote:
> It's a bit more complicated, in order to increase LOWMEM_SIZE you need
> to adjust all the other variables to make space.
>
> To get 2G of user virtual space I think you need:
>
> CONFIG_ADVANCED_OPTIONS=y
> CONFIG_LOWMEM_SIZE_BOOL=y
> CONFIG_LOWMEM_SIZE=0x60000000
> CONFIG_PAGE_OFFSET_BOOL=y
> CONFIG_PAGE_OFFSET=0x90000000
> CONFIG_KERNEL_START_BOOL=y
> CONFIG_KERNEL_START=0x90000000
> CONFIG_PHYSICAL_START=0x00000000
> CONFIG_TASK_SIZE_BOOL=y
> CONFIG_TASK_SIZE=0x80000000
>
> Which results in 1.5GB of lowmem.
Booting this config on the G4 worked, but the issue showed up anyhow.
> Or if you want to map all 2G of RAM directly in the kernel without
> highmem, but limit user virtual space to 1.5G:
>
> CONFIG_ADVANCED_OPTIONS=y
> CONFIG_LOWMEM_SIZE_BOOL=y
> CONFIG_LOWMEM_SIZE=0x80000000
> CONFIG_PAGE_OFFSET_BOOL=y
> CONFIG_PAGE_OFFSET=0x70000000
> CONFIG_KERNEL_START_BOOL=y
> CONFIG_KERNEL_START=0x70000000
> CONFIG_PHYSICAL_START=0x00000000
> CONFIG_TASK_SIZE_BOOL=y
> CONFIG_TASK_SIZE=0x60000000
This actually did the trick!
Also I disabled highmem via HIGHMEM=n. With this config the machine did run the "stress-ng --vm 2 --vm-bytes 1930M --verify -v" load for about 2 hrs without hitting the issue.
> You can also reclaim another 256MB of virtual space if you disable
> CONFIG_MODULES.
Did not try that 'cause the 2nd config worked.
Working 2G_no-highmem .config attached and the dmesg of both configs attached.
Regards,
Erhard
[-- Attachment #2: dmesg_610-rc2_g4_2G_no-highmem --]
[-- Type: application/octet-stream, Size: 39423 bytes --]
[ 0.000000] Total memory = 2048MB; using 4096kB for hash table
[ 0.000000] Activating Kernel Userspace Access Protection
[ 0.000000] Activating Kernel Userspace Execution Prevention
[ 0.000000] Linux version 6.10.0-rc2-PMacG4 (root@T1000) (gcc (Gentoo 13.2.1_p20240210 p14) 13.2.1 20240210, GNU ld (Gentoo 2.42 p3) 2.42.0) #13 SMP Thu Jun 6 16:07:44 CEST 2024
[ 0.000000] ioremap() called early from pmac_feature_init+0x254/0xa7c. Use early_ioremap() instead
[ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0x24
[ 0.000000] Mapped at 0xffb9e000
[ 0.000000] ioremap() called early from probe_one_macio+0x150/0x238. Use early_ioremap() instead
[ 0.000000] Found a Keylargo mac-io controller, rev: 3, mapped at 0x(ptrval)
[ 0.000000] PowerMac motherboard: PowerMac G4 Windtunnel
[ 0.000000] ioremap() called early from btext_map+0x5c/0x7c. Use early_ioremap() instead
[ 0.000000] Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
[ 0.000000] printk: legacy bootconsole [udbg0] enabled
[ 0.000000] CPU maps initialized for 1 thread per core
[ 0.000000] (thread shift is 0)
[ 0.000000] -----------------------------------------------------
[ 0.000000] phys_mem_size = 0x80000000
[ 0.000000] dcache_bsize = 0x20
[ 0.000000] icache_bsize = 0x20
[ 0.000000] cpu_features = 0x000000002514600a
[ 0.000000] possible = 0x00000000277de00a
[ 0.000000] always = 0x0000000001000000
[ 0.000000] cpu_user_features = 0x9c000001 0x00000000
[ 0.000000] mmu_features = 0x00010201
[ 0.000000] Hash_size = 0x400000
[ 0.000000] Hash_mask = 0xffff
[ 0.000000] -----------------------------------------------------
[ 0.000000] ioremap() called early from pmac_setup_arch+0xd0/0x228. Use early_ioremap() instead
[ 0.000000] ioremap() called early from find_via_pmu+0x220/0x288. Use early_ioremap() instead
[ 0.000000] ioremap() called early from find_via_pmu+0xd4/0x288. Use early_ioremap() instead
[ 0.000000] via-pmu: Server Mode is disabled
[ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c
[ 0.000000] ioremap() called early from pmac_nvram_init+0x284/0x518. Use early_ioremap() instead
[ 0.000000] nvram: Checking bank 0...
[ 0.000000] nvram: gen0=3427, gen1=3428
[ 0.000000] nvram: Active bank is: 1
[ 0.000000] nvram: OF partition at 0x410
[ 0.000000] nvram: XP partition at 0x1020
[ 0.000000] nvram: NR partition at 0x1120
[ 0.000000] Top of RAM: 0x80000000, Total RAM: 0x80000000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] Normal [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] percpu: Embedded 14 pages/cpu s28448 r8192 d20704 u57344
[ 0.000000] pcpu-alloc: s28448 r8192 d20704 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Kernel command line: ro root=/dev/sda5 slub_debug=FZP page_poison=1 netconsole=6666@192.168.2.8/eth0,6666@192.168.2.3/A8:A1:59:16:4F:EA debug
[ 0.000000] Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 524288
[ 0.000000] mem auto-init: stack:all(pattern), heap alloc:off, heap free:off, mlocked free:off
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xffbdf000..0xfffff000 : fixmap
[ 0.000000] * 0xff8f4000..0xffbdf000 : early ioremap
[ 0.000000] * 0xf1000000..0xff8f4000 : vmalloc & ioremap
[ 0.000000] * 0x60000000..0x70000000 : modules
[ 0.000000] Memory: 2057112K/2097152K available (7768K kernel code, 516K rwdata, 4520K rodata, 1096K init, 254K bss, 40040K reserved, 0K cma-reserved)
[ 0.000000] **********************************************************
[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.000000] ** **
[ 0.000000] ** This system shows unhashed kernel memory addresses **
[ 0.000000] ** via the console, logs, and other interfaces. This **
[ 0.000000] ** might reduce the security of your system. **
[ 0.000000] ** **
[ 0.000000] ** If you see this message and you are not debugging **
[ 0.000000] ** the kernel, report this immediately to your system **
[ 0.000000] ** administrator! **
[ 0.000000] ** **
[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.000000] **********************************************************
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
[ 0.000000] mpic: Resetting
[ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 2 CPUs
[ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f
[ 0.000000] mpic: Initializing for 64 sources
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] time_init: decrementer frequency = 41.658765 MHz
[ 0.000000] time_init: processor frequency = 1416.666661 MHz
[ 0.000006] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x99b97f1da, max_idle_ns: 440795202966 ns
[ 0.000555] clocksource: timebase mult[18012a56] shift[24] registered
[ 0.001052] clockevent: decrementer mult[aaa2619] shift[32] cpu[0]
[ 0.002091] Console: colour dummy device 80x25
[ 0.002554] printk: legacy console [tty0] enabled
[ 0.003013] printk: legacy bootconsole [udbg0] disabled
[ 0.003517] pid_max: default: 32768 minimum: 301
[ 0.006212] LSM: initializing lsm=capability,yama
[ 0.006249] Yama: becoming mindful.
[ 0.006969] Mount-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 0.007043] Mountpoint-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 0.012502] PowerMac SMP probe found 2 cpus
[ 0.012794] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
[ 0.012842] channel 0 bus <multibus>
[ 0.012862] channel 1 bus <multibus>
[ 0.012964] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
[ 0.013006] channel 0 bus <multibus>
[ 0.013060] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c
[ 0.013096] channel 1 bus <multibus>
[ 0.013116] channel 2 bus <multibus>
[ 0.013139] pmf: no parser for command 17 !
[ 0.013202] Processor timebase sync using GPIO 0x73
[ 0.013215] mpic: requesting IPIs...
[ 0.013311] CPU0: L2CR is 80000000
[ 0.013325] CPU0: L3CR is 9c030000
[ 0.014936] MPC7450 family performance monitor hardware support registered
[ 0.015144] rcu: Hierarchical SRCU implementation.
[ 0.015167] rcu: Max phase no-delay instances is 1000.
[ 0.016043] smp: Bringing up secondary CPUs ...
[83973669.020404] CPU1: L2CR was 0
[83973669.020461] CPU1: L2CR set to 80000000
[83973669.020467] CPU1: L3CR was 0
[83973669.020613] CPU1: L3CR set to 9c030000
[ 0.019276] smp: Brought up 1 node, 2 CPUs
[ 0.021606] devtmpfs: initialized
[ 0.022466] Duplicate name in PowerPC,G4@0, renamed to "l2-cache#1"
[ 0.022588] Duplicate name in l2-cache#1, renamed to "l2-cache#1"
[ 0.023069] Duplicate name in PowerPC,G4@1, renamed to "l2-cache#1"
[ 0.023183] Duplicate name in l2-cache#1, renamed to "l2-cache#1"
[ 0.028401] Duplicate name in gpio@50, renamed to "gpio5@6f#1"
[ 0.028500] Duplicate name in gpio@50, renamed to "gpio6@70#1"
[ 0.028742] Duplicate name in gpio@50, renamed to "gpio11@75#1"
[ 0.028868] Duplicate name in gpio@50, renamed to "extint-gpio15@67#1"
[ 0.035391] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0
[ 0.035433] PCI host bridge /pci@f0000000 ranges:
[ 0.035470] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000
[ 0.035500] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
[ 0.035634] MEM 0x0000000090000000..0x00000000afffffff -> 0x0000000090000000
[ 0.035690] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0
[ 0.035713] PCI host bridge /pci@f2000000 (primary) ranges:
[ 0.035744] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000
[ 0.035773] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000
[ 0.035891] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000
[ 0.035951] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0
[ 0.035974] PCI host bridge /pci@f4000000 ranges:
[ 0.036004] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000
[ 0.036029] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000
[ 0.036241] Found NEC PD720100A USB2 chip with disabled EHCI, fixing up...
[ 0.036596] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.036692] futex hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.039943] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.045426] PCI: Probing PCI hardware
[ 0.046036] PCI host bridge to bus 0000:00
[ 0.046066] pci_bus 0000:00: root bus resource [io 0xff780000-0xfff7ffff] (bus address [0x0000-0x7fffff])
[ 0.046096] pci_bus 0000:00: root bus resource [mem 0xf1000000-0xf1ffffff]
[ 0.046117] pci_bus 0000:00: root bus resource [mem 0x90000000-0xafffffff]
[ 0.046141] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.046161] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.046658] pci 0000:00:0b.0: [106b:0034] type 00 class 0x060000 conventional PCI endpoint
[ 0.047317] pci 0000:00:10.0: [1002:4150] type 00 class 0x030000 conventional PCI endpoint
[ 0.047365] pci 0000:00:10.0: BAR 0 [mem 0xa0000000-0xafffffff pref]
[ 0.047391] pci 0000:00:10.0: BAR 1 [io 0xff780400-0xff7804ff]
[ 0.047415] pci 0000:00:10.0: BAR 2 [mem 0x90000000-0x9000ffff]
[ 0.047455] pci 0000:00:10.0: ROM [mem 0x90020000-0x9003ffff pref]
[ 0.047513] pci 0000:00:10.0: supports D1 D2
[ 0.048328] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.049494] OF: /pci@f2000000/mac-io@17/gpio@50/gpio5@6f: could not find phandle 1751474532
[ 0.049573] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio15@67: could not find phandle 1751474532
[ 0.049651] OF: /pci@f2000000/mac-io@17/gpio@50/gpio6@70: could not find phandle 1634562093
[ 0.049723] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio16@68: could not find phandle 1936745825
[ 0.049804] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio14@66: could not find phandle 1818848869
[ 0.049882] OF: /pci@f2000000/mac-io@17/gpio@50/gpio12@76: could not find phandle 1835103092
[ 0.049949] OF: /pci@f2000000/mac-io@17/gpio@50/gpio11@75: could not find phandle 1635083369
[ 0.050013] OF: /pci@f2000000/mac-io@17/gpio@50/gpio5@6f: could not find phandle 1751474532
[ 0.050077] OF: /pci@f2000000/mac-io@17/gpio@50/gpio6@70: could not find phandle 1634562093
[ 0.050140] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio4@5c: could not find phandle 1818848869
[ 0.050218] OF: /pci@f2000000/mac-io@17/gpio@50/gpio11@75: could not find phandle 1635083369
[ 0.050283] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio15@67: could not find phandle 1751474532
[ 0.051647] pci_bus 0001:00: Fixed dependency cycle(s) with /pci@f2000000/mac-io@17/interrupt-controller@40000
[ 0.051758] PCI host bridge to bus 0001:00
[ 0.051777] pci_bus 0001:00: root bus resource [io 0x0000-0x7fffff]
[ 0.051798] pci_bus 0001:00: root bus resource [mem 0xf3000000-0xf3ffffff]
[ 0.051819] pci_bus 0001:00: root bus resource [mem 0x80000000-0x8fffffff]
[ 0.051841] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.051861] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.052353] pci 0001:00:0b.0: [106b:0035] type 00 class 0x060000 conventional PCI endpoint
[ 0.052941] pci 0001:00:12.0: [1033:0035] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.052986] pci 0001:00:12.0: BAR 0 [mem 0x8008c000-0x8008cfff]
[ 0.053065] pci 0001:00:12.0: supports D1 D2
[ 0.053081] pci 0001:00:12.0: PME# supported from D0 D1 D2 D3hot
[ 0.053530] pci 0001:00:12.1: [1033:0035] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.053574] pci 0001:00:12.1: BAR 0 [mem 0x8008b000-0x8008bfff]
[ 0.053653] pci 0001:00:12.1: supports D1 D2
[ 0.053669] pci 0001:00:12.1: PME# supported from D0 D1 D2 D3hot
[ 0.053981] pci 0001:00:12.2: [1033:00e0] type 00 class 0x0c0320 conventional PCI endpoint
[ 0.054021] pci 0001:00:12.2: BAR 0 [mem 0x80081000-0x800810ff]
[ 0.054099] pci 0001:00:12.2: supports D1 D2
[ 0.054115] pci 0001:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.054427] pci 0001:00:13.0: [1095:3112] type 00 class 0x018000 conventional PCI endpoint
[ 0.054467] pci 0001:00:13.0: BAR 0 [io 0x0460-0x0467]
[ 0.054490] pci 0001:00:13.0: BAR 1 [io 0x0450-0x0453]
[ 0.054512] pci 0001:00:13.0: BAR 2 [io 0x0440-0x0447]
[ 0.054534] pci 0001:00:13.0: BAR 3 [io 0x0430-0x0433]
[ 0.054556] pci 0001:00:13.0: BAR 4 [io 0x0420-0x042f]
[ 0.054579] pci 0001:00:13.0: BAR 5 [mem 0x80082000-0x800821ff]
[ 0.054602] pci 0001:00:13.0: ROM [mem 0x80100000-0x8017ffff pref]
[ 0.054651] pci 0001:00:13.0: supports D1 D2
[ 0.055014] pci 0001:00:15.0: [9710:9865] type 00 class 0x070002 conventional PCI endpoint
[ 0.055056] pci 0001:00:15.0: BAR 0 [io 0x0410-0x0417]
[ 0.055079] pci 0001:00:15.0: BAR 1 [mem 0x8008a000-0x8008afff]
[ 0.055112] pci 0001:00:15.0: BAR 4 [mem 0x80089000-0x80089fff]
[ 0.055174] pci 0001:00:15.0: supports D1 D2
[ 0.055190] pci 0001:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.055555] pci 0001:00:15.1: [9710:9865] type 00 class 0x070002 conventional PCI endpoint
[ 0.055598] pci 0001:00:15.1: BAR 0 [io 0x0400-0x0407]
[ 0.055621] pci 0001:00:15.1: BAR 1 [mem 0x80088000-0x80088fff]
[ 0.055654] pci 0001:00:15.1: BAR 4 [mem 0x80087000-0x80087fff]
[ 0.055715] pci 0001:00:15.1: supports D1 D2
[ 0.055732] pci 0001:00:15.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.056183] pci 0001:00:15.2: [ffff:9865] type 00 class 0x070103 conventional PCI endpoint
[ 0.056226] pci 0001:00:15.2: BAR 0 [io 0x0000-0x0007]
[ 0.056248] pci 0001:00:15.2: BAR 1 [io 0x0000-0x0007]
[ 0.056271] pci 0001:00:15.2: BAR 2 [mem 0x00000000-0x00000fff]
[ 0.056299] pci 0001:00:15.2: BAR 4 [mem 0x00000000-0x00000fff]
[ 0.056359] pci 0001:00:15.2: supports D1 D2
[ 0.056376] pci 0001:00:15.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.056682] pci 0001:00:16.0: [14e4:4320] type 00 class 0x028000 conventional PCI endpoint
[ 0.056722] pci 0001:00:16.0: BAR 0 [mem 0x8008e000-0x8008ffff]
[ 0.056798] pci 0001:00:16.0: supports D1 D2
[ 0.056814] pci 0001:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.057112] pci 0001:00:17.0: [106b:0022] type 00 class 0xff0000 conventional PCI endpoint
[ 0.057152] pci 0001:00:17.0: BAR 0 [mem 0x80000000-0x8007ffff]
[ 0.057612] pci 0001:00:18.0: [106b:0019] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.057653] pci 0001:00:18.0: BAR 0 [mem 0x80086000-0x80086fff]
[ 0.057978] pci 0001:00:19.0: [106b:0019] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.058018] pci 0001:00:19.0: BAR 0 [mem 0x80085000-0x80085fff]
[ 0.058530] pci 0001:00:1b.0: [1033:0035] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.058574] pci 0001:00:1b.0: BAR 0 [mem 0x80084000-0x80084fff]
[ 0.058654] pci 0001:00:1b.0: supports D1 D2
[ 0.058670] pci 0001:00:1b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.059063] pci 0001:00:1b.1: [1033:0035] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.059106] pci 0001:00:1b.1: BAR 0 [mem 0x80083000-0x80083fff]
[ 0.059185] pci 0001:00:1b.1: supports D1 D2
[ 0.059201] pci 0001:00:1b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.059522] pci 0001:00:1b.2: [1033:00e0] type 00 class 0x0c0320 conventional PCI endpoint
[ 0.059562] pci 0001:00:1b.2: BAR 0 [mem 0x80080000-0x800800ff]
[ 0.059638] pci 0001:00:1b.2: supports D1 D2
[ 0.059654] pci 0001:00:1b.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.060076] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.061755] PCI host bridge to bus 0002:00
[ 0.061787] pci_bus 0002:00: root bus resource [io 0x880000-0x107ffff] (bus address [0x0000-0x7fffff])
[ 0.061813] pci_bus 0002:00: root bus resource [mem 0xf5000000-0xf5ffffff]
[ 0.061836] pci_bus 0002:00: root bus resource [bus 00-ff]
[ 0.061855] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.062354] pci 0002:00:0b.0: [106b:0036] type 00 class 0x060000 conventional PCI endpoint
[ 0.062845] pci 0002:00:0d.0: [106b:0033] type 00 class 0xff0000 conventional PCI endpoint
[ 0.062888] pci 0002:00:0d.0: BAR 0 [mem 0xf5004000-0xf5007fff]
[ 0.063362] pci 0002:00:0e.0: [106b:0031] type 00 class 0x0c0010 conventional PCI endpoint
[ 0.063404] pci 0002:00:0e.0: BAR 0 [mem 0xf5000000-0xf5000fff]
[ 0.063475] pci 0002:00:0e.0: supports D1 D2
[ 0.063491] pci 0002:00:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.063829] pci 0002:00:0f.0: [106b:0032] type 00 class 0x020000 conventional PCI endpoint
[ 0.063869] pci 0002:00:0f.0: BAR 0 [mem 0xf5200000-0xf53fffff]
[ 0.063919] pci 0002:00:0f.0: ROM [mem 0xf5100000-0xf51fffff pref]
[ 0.064766] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.065207] PCI 0000:00 Cannot reserve Legacy IO [io 0xff780000-0xff780fff]
[ 0.065243] PCI 0001:00 Cannot reserve Legacy IO [io 0x0000-0x0fff]
[ 0.065275] pci_bus 0000:00: resource 4 [io 0xff780000-0xfff7ffff]
[ 0.065295] pci_bus 0000:00: resource 5 [mem 0xf1000000-0xf1ffffff]
[ 0.065314] pci_bus 0000:00: resource 6 [mem 0x90000000-0xafffffff]
[ 0.065351] pci 0001:00:15.2: BAR 2 [mem 0xf3000000-0xf3000fff]: assigned
[ 0.065375] pci 0001:00:15.2: BAR 4 [mem 0xf3001000-0xf3001fff]: assigned
[ 0.065398] pci 0001:00:15.2: BAR 0 [io 0x1000-0x1007]: assigned
[ 0.065420] pci 0001:00:15.2: BAR 1 [io 0x1008-0x100f]: assigned
[ 0.065479] pci_bus 0001:00: resource 4 [io 0x0000-0x7fffff]
[ 0.065499] pci_bus 0001:00: resource 5 [mem 0xf3000000-0xf3ffffff]
[ 0.065518] pci_bus 0001:00: resource 6 [mem 0x80000000-0x8fffffff]
[ 0.065539] pci_bus 0002:00: resource 4 [io 0x880000-0x107ffff]
[ 0.065557] pci_bus 0002:00: resource 5 [mem 0xf5000000-0xf5ffffff]
[ 0.125597] raid6: altivecx8 gen() 3316 MB/s
[ 0.182352] raid6: altivecx4 gen() 3417 MB/s
[ 0.239116] raid6: altivecx2 gen() 3175 MB/s
[ 0.295884] raid6: altivecx1 gen() 2594 MB/s
[ 0.352683] raid6: int32x8 gen() 362 MB/s
[ 0.409403] raid6: int32x4 gen() 441 MB/s
[ 0.466175] raid6: int32x2 gen() 882 MB/s
[ 0.522947] raid6: int32x1 gen() 529 MB/s
[ 0.522963] raid6: using algorithm altivecx4 gen() 3417 MB/s
[ 0.522979] raid6: using intx1 recovery algorithm
[ 0.525173] SCSI subsystem initialized
[ 0.525677] libata version 3.00 loaded.
[ 0.525932] usbcore: registered new interface driver usbfs
[ 0.526094] usbcore: registered new interface driver hub
[ 0.526194] usbcore: registered new device driver usb
[ 0.528824] pci 0000:00:10.0: vgaarb: setting as boot VGA device
[ 0.528861] pci 0000:00:10.0: vgaarb: bridge control possible
[ 0.528877] pci 0000:00:10.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
[ 0.528929] vgaarb: loaded
[ 0.529227] clocksource: Switched to clocksource timebase
[ 0.551064] NET: Registered PF_INET protocol family
[ 0.552220] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.556092] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 20480 bytes, linear)
[ 0.556992] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.557749] TCP established hash table entries: 16384 (order: 4, 65536 bytes, linear)
[ 0.561429] TCP bind hash table entries: 16384 (order: 7, 655360 bytes, linear)
[ 0.562765] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.563687] UDP hash table entries: 1024 (order: 3, 49152 bytes, linear)
[ 0.564009] UDP-Lite hash table entries: 1024 (order: 3, 49152 bytes, linear)
[ 0.564711] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.565032] pci 0001:00:12.0: enabling device (0000 -> 0002)
[ 0.565125] pci 0001:00:12.1: enabling device (0000 -> 0002)
[ 0.565174] pci 0001:00:12.2: enabling device (0004 -> 0006)
[ 0.565253] Apple USB OHCI 0001:00:18.0 disabled by firmware
[ 0.565271] pci 0001:00:18.0: Can't enable PCI device, BIOS handoff failed.
[ 0.565295] Apple USB OHCI 0001:00:19.0 disabled by firmware
[ 0.565311] pci 0001:00:19.0: Can't enable PCI device, BIOS handoff failed.
[ 0.565339] pci 0001:00:1b.0: enabling device (0000 -> 0002)
[ 0.565385] pci 0001:00:1b.1: enabling device (0000 -> 0002)
[ 0.565431] pci 0001:00:1b.2: enabling device (0004 -> 0006)
[ 0.565493] pci 0002:00:0f.0: CLS mismatch (32 != 1020), using 32 bytes
[ 0.565852] Thermal assist unit not available
[ 0.568222] Initialise system trusted keyrings
[ 0.568578] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 0.579985] 9p: Installing v9fs 9p2000 file system support
[ 0.580702] NET: Registered PF_ALG protocol family
[ 0.580788] xor: measuring software checksum speed
[ 0.589373] 8regs : 1152 MB/sec
[ 0.599478] 8regs_prefetch : 975 MB/sec
[ 0.607590] 32regs : 1216 MB/sec
[ 0.616830] 32regs_prefetch : 1067 MB/sec
[ 0.618938] altivec : 4706 MB/sec
[ 0.618952] xor: using function: altivec (4706 MB/sec)
[ 0.618982] Key type asymmetric registered
[ 0.618997] Asymmetric key parser 'x509' registered
[ 0.624062] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.624344] io scheduler bfq registered
[ 0.629112] Using unsupported 1920x1080 (null) at a0008000, depth=8, pitch=2048
[ 0.670513] Console: switching to colour frame buffer device 240x67
[ 0.710747] fb0: Open Firmware frame buffer device on /pci@f0000000/ATY,AlteracParent@10/ATY,Alterac_A@0
[ 0.711604] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.714742] serial 0001:00:15.0: enabling device (0004 -> 0007)
[ 0.715866] 0001:00:15.0: ttyS0 at I/O 0x410 (irq = 58, base_baud = 115200) is a 16550A
[ 0.716686] serial 0001:00:15.1: enabling device (0004 -> 0007)
[ 0.717746] 0001:00:15.1: ttyS1 at I/O 0x400 (irq = 58, base_baud = 115200) is a 16550A
[ 0.719993] MacIO PCI driver attached to Keylargo chipset
[ 0.726385] sata_sil 0001:00:13.0: version 2.4
[ 0.726692] sata_sil 0001:00:13.0: enabling device (0004 -> 0007)
[ 0.728964] scsi host0: sata_sil
[ 0.730338] scsi host1: sata_sil
[ 0.730837] ata1: SATA max UDMA/100 mmio m512@0x80082000 tf 0x80082080 irq 53 lpm-pol 0
[ 0.731090] ata2: SATA max UDMA/100 mmio m512@0x80082000 tf 0x800820c0 irq 53 lpm-pol 0
[ 0.731579] pata-pci-macio 0002:00:0d.0: enabling device (0004 -> 0006)
[ 0.745900] pata-pci-macio 0002:00:0d.0: Activating pata-macio chipset UniNorth ATA-6, Apple bus ID 3
[ 0.747801] scsi host2: pata_macio
[ 0.748285] ata3: PATA max UDMA/100 irq 39 lpm-pol 0
[ 1.045603] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1.046538] ata1.00: ATA-9: SanDisk SSD PLUS 240GB, UF4500RL, max UDMA/133
[ 1.046758] ata1.00: 468877312 sectors, multi 1: LBA48 NCQ (depth 0/32)
[ 1.048267] ata1.00: Features: Dev-Sleep
[ 1.072727] ata1.00: configured for UDMA/100
[ 1.073604] scsi 0:0:0:0: Direct-Access ATA SanDisk SSD PLUS 00RL PQ: 0 ANSI: 5
[ 1.075969] sd 0:0:0:0: [sda] 468877312 512-byte logical blocks: (240 GB/224 GiB)
[ 1.076452] sd 0:0:0:0: [sda] Write Protect is off
[ 1.076617] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.076853] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.077264] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 1.080739] sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[ 1.083059] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.555914] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1.558479] ata2.00: ATA-9: WDC WD5000LPLX-60ZNTT1, 02.01A02, max UDMA/133
[ 1.558698] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 1.561388] ata2.00: configured for UDMA/100
[ 1.562005] scsi 1:0:0:0: Direct-Access ATA WDC WD5000LPLX-6 1A02 PQ: 0 ANSI: 5
[ 1.564340] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.564591] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1.564814] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.564973] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.565204] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.565611] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
[ 1.789243] pata-macio 0.0001f000:ata-4: Activating pata-macio chipset KeyLargo ATA-4, Apple bus ID 2
[ 1.800089] scsi host3: pata_macio
[ 1.809519] ata4: PATA max UDMA/66 irq 19 lpm-pol 0
[ 1.975172] ata4.00: CFA: DeLOCK 54143 512MB, 100511E, max UDMA/66
[ 1.984454] ata4.00: 1009008 sectors, multi 1: LBA
[ 2.316962] sdb: [mac] sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8
[ 2.328471] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.338375] scsi 3:0:0:0: Direct-Access ATA DeLOCK 54143 512 11E PQ: 0 ANSI: 5
[ 2.349692] sd 3:0:0:0: [sdc] 1009008 512-byte logical blocks: (517 MB/493 MiB)
[ 2.359159] sd 3:0:0:0: [sdc] Write Protect is off
[ 2.368454] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.377821] sd 3:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.387404] sd 3:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
[ 2.399656] sdc: [mac] sdc1 sdc2 sdc3 sdc4 sdc5 sdc6
[ 2.410887] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 2.855902] pata-macio 0.00020000:ata-3: Activating pata-macio chipset KeyLargo ATA-3, Apple bus ID 0
[ 2.867293] scsi host4: pata_macio
[ 2.877572] ata5: PATA max MWDMA2 irq 20 lpm-pol 0
[ 2.887794] sungem.c:v1.0 David S. Miller <davem@redhat.com>
[ 2.899403] gem 0002:00:0f.0 eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0a:95:9c:76:3a
[ 2.910902] ehci-pci 0001:00:12.2: EHCI Host Controller
[ 2.921122] rtc-generic rtc-generic: registered as rtc0
[ 2.921345] ehci-pci 0001:00:12.2: new USB bus registered, assigned bus number 1
[ 2.931766] PowerMac i2c bus pmu 2 registered
[ 2.941680] ehci-pci 0001:00:12.2: irq 52, io mem 0x80081000
[ 2.951911] PowerMac i2c bus pmu 1 registered
[ 2.972240] PowerMac i2c bus mac-io 0 registered
[ 2.982135] i2c i2c-2: No i2c address for /pci@f2000000/mac-io@17/i2c@18000/i2c-modem
[ 2.982563] ehci-pci 0001:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.992223] PowerMac i2c bus uni-n 1 registered
[ 3.002179] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10
[ 3.011591] i2c i2c-3: i2c-powermac: modalias failure on /uni-n@f8000000/i2c@f8001000/cereal@1c0
[ 3.021466] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.031716] PowerMac i2c bus uni-n 0 registered
[ 3.041329] usb usb1: Product: EHCI Host Controller
[ 3.041339] usb usb1: Manufacturer: Linux 6.10.0-rc2-PMacG4 ehci_hcd
[ 3.052328] hid: raw HID events driver (C) Jiri Kosina
[ 3.061269] usb usb1: SerialNumber: 0001:00:12.2
[ 3.065133] ata5.00: ATAPI: _NEC DVD_RW ND-3520A, 1.04, max UDMA/33
[ 3.072095] usbcore: registered new interface driver usbhid
[ 3.082187] hub 1-0:1.0: USB hub found
[ 3.091604] usbhid: USB HID core driver
[ 3.101983] hub 1-0:1.0: 5 ports detected
[ 3.113211] NET: Registered PF_INET6 protocol family
[ 3.132631] ehci-pci 0001:00:1b.2: EHCI Host Controller
[ 3.143377] scsi 4:0:0:0: CD-ROM _NEC DVD_RW ND-3520A 1.04 PQ: 0 ANSI: 5
[ 3.151998] ehci-pci 0001:00:1b.2: new USB bus registered, assigned bus number 2
[ 3.172655] Segment Routing with IPv6
[ 3.182038] ehci-pci 0001:00:1b.2: irq 63, io mem 0x80080000
[ 3.192370] In-situ OAM (IOAM) with IPv6
[ 3.212453] 9pnet: Installing 9P2000 support
[ 3.215919] ehci-pci 0001:00:1b.2: USB 2.0 started, EHCI 1.00
[ 3.222907] drmem: No dynamic reconfiguration memory found
[ 3.232833] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10
[ 3.252554] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.259051] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 3.262526] usb usb2: Product: EHCI Host Controller
[ 3.262534] usb usb2: Manufacturer: Linux 6.10.0-rc2-PMacG4 ehci_hcd
[ 3.292917] usb usb2: SerialNumber: 0001:00:1b.2
[ 3.303128] registered taskstats version 1
[ 3.313312] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 3.313999] hub 2-0:1.0: USB hub found
[ 3.323376] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.334337] Loading compiled-in X.509 certificates
[ 3.354046] hub 2-0:1.0: 5 ports detected
[ 3.398018] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 3.463532] zswap: loaded using pool lzo/zsmalloc
[ 3.473823] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers
[ 3.484160] page_owner is disabled
[ 3.515753] Btrfs loaded, zoned=no, fsverity=no
[ 4.288320] input: PMU as /devices/virtual/input/input0
[ 4.298843] netpoll: netconsole: local port 6666
[ 4.308737] netpoll: netconsole: local IPv4 address 192.168.2.8
[ 4.318587] netpoll: netconsole: interface 'eth0'
[ 4.328326] netpoll: netconsole: remote port 6666
[ 4.337936] netpoll: netconsole: remote IPv4 address 192.168.2.3
[ 4.347531] netpoll: netconsole: remote ethernet address a8:a1:59:16:4f:ea
[ 4.357222] netpoll: netconsole: device eth0 not up yet, forcing it
[ 4.442982] sungem_phy: PHY ID: 2060e1, addr: 0
[ 4.452782] gem 0002:00:0f.0 eth0: Found BCM5421 PHY
[ 8.136234] gem 0002:00:0f.0 eth0: Link is up at 1000 Mbps, full-duplex
[ 8.145888] gem 0002:00:0f.0 eth0: Pause is enabled (rxfifo: 10240 off: 7168 on: 5632)
[ 8.157029] printk: legacy console [netcon0] enabled
[ 8.173225] netconsole: network logging started
[ 8.197067] EXT4-fs (sda5): mounted filesystem fa07e66f-b4f9-404f-85d8-487d3c097aec ro with ordered data mode. Quota mode: disabled.
[ 8.207054] VFS: Mounted root (ext4 filesystem) readonly on device 8:5.
[ 8.220532] devtmpfs: mounted
[ 8.232229] Freeing unused kernel image (initmem) memory: 1096K
[ 8.271292] Checked W+X mappings: passed, no W+X pages found
[ 8.280986] rodata_test: all tests were successful
[ 8.290493] Run /sbin/init as init process
[ 8.299912] with arguments:
[ 8.309277] /sbin/init
[ 8.318671] with environment:
[ 8.327910] HOME=/
[ 8.336962] TERM=linux
[ 12.462921] ohci-pci 0001:00:12.0: OHCI PCI host controller
[ 12.499497] ohci-pci 0001:00:12.0: new USB bus registered, assigned bus number 3
[ 12.516346] ohci-pci 0001:00:12.0: irq 52, io mem 0x8008c000
[ 12.709691] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[ 12.717819] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.725729] usb usb3: Product: OHCI PCI host controller
[ 12.733589] usb usb3: Manufacturer: Linux 6.10.0-rc2-PMacG4 ohci_hcd
[ 12.741464] usb usb3: SerialNumber: 0001:00:12.0
[ 12.860019] hub 3-0:1.0: USB hub found
[ 12.911292] hub 3-0:1.0: 3 ports detected
[ 12.958985] [drm] radeon kernel modesetting enabled.
[ 12.960668] ohci-pci 0001:00:12.1: OHCI PCI host controller
[ 12.975255] Console: switching to colour dummy device 80x25
[ 12.978822] radeon 0000:00:10.0: enabling device (0006 -> 0007)
[ 12.980616] [drm] initializing kernel modesetting (RV350 0x1002:0x4150 0x1002:0x0002 0x00).
[ 12.980683] [drm] Forcing AGP to PCI mode
[ 12.980931] radeon 0000:00:10.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0x0000
[ 13.037625] [drm] Generation 2 PCI interface, using max accessible memory
[ 13.037689] radeon 0000:00:10.0: VRAM: 256M 0x00000000A0000000 - 0x00000000AFFFFFFF (256M used)
[ 13.037729] radeon 0000:00:10.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
[ 13.037892] [drm] Detected VRAM RAM=256M, BAR=256M
[ 13.037927] [drm] RAM width 128bits DDR
[ 13.038919] [drm] radeon: 256M of VRAM memory ready
[ 13.039055] [drm] radeon: 512M of GTT memory ready.
[ 13.039203] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 13.047507] [drm] radeon: 1 quad pipes, 1 Z pipes initialized
[ 13.047599] [drm] PCI GART of 512M enabled (table at 0x0000000043B00000).
[ 13.047732] radeon 0000:00:10.0: WB enabled
[ 13.047815] radeon 0000:00:10.0: fence driver on ring 0 use gpu addr 0x0000000080000000
[ 13.048452] [drm] radeon: irq initialized.
[ 13.048550] [drm] Loading R300 Microcode
[ 13.069402] ohci-pci 0001:00:12.1: new USB bus registered, assigned bus number 4
[ 13.069688] ohci-pci 0001:00:12.1: irq 52, io mem 0x8008b000
[ 13.081607] [drm] radeon: ring at 0x0000000080001000
[ 13.081716] [drm] ring test succeeded in 1 usecs
[ 13.085504] [drm] ib test succeeded in 0 usecs
[ 13.085596] stackdepot: allocating hash table of 131072 entries via kvcalloc
[ 13.117259] [drm] Radeon Display Connectors
[ 13.117337] [drm] Connector 0:
[ 13.117361] [drm] DVI-I-1
[ 13.117387] [drm] HPD2
[ 13.117413] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 13.117445] [drm] Encoders:
[ 13.117469] [drm] CRT1: INTERNAL_DAC1
[ 13.117495] [drm] DFP2: INTERNAL_DVO1
[ 13.117520] [drm] Connector 1:
[ 13.117544] [drm] DVI-I-2
[ 13.117569] [drm] HPD1
[ 13.117591] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 13.117653] [drm] Encoders:
[ 13.117678] [drm] CRT2: INTERNAL_DAC2
[ 13.117714] [drm] DFP1: INTERNAL_TMDS1
[ 13.117975] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:10.0 on minor 0
[ 13.147529] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[ 13.147609] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.147649] usb usb4: Product: OHCI PCI host controller
[ 13.147679] usb usb4: Manufacturer: Linux 6.10.0-rc2-PMacG4 ohci_hcd
[ 13.147709] usb usb4: SerialNumber: 0001:00:12.1
[ 13.148786] hub 4-0:1.0: USB hub found
[ 13.148949] hub 4-0:1.0: 2 ports detected
[ 13.150098] Apple USB OHCI 0001:00:18.0 disabled by firmware
[ 13.150200] Apple USB OHCI 0001:00:19.0 disabled by firmware
[ 13.150343] ohci-pci 0001:00:1b.0: OHCI PCI host controller
[ 13.150418] ohci-pci 0001:00:1b.0: new USB bus registered, assigned bus number 5
[ 13.150600] ohci-pci 0001:00:1b.0: irq 63, io mem 0x80084000
[ 13.226277] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[ 13.226372] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.226435] usb usb5: Product: OHCI PCI host controller
[ 13.226462] usb usb5: Manufacturer: Linux 6.10.0-rc2-PMacG4 ohci_hcd
[ 13.226493] usb usb5: SerialNumber: 0001:00:1b.0
[ 13.229087] hub 5-0:1.0: USB hub found
[ 13.229321] hub 5-0:1.0: 3 ports detected
[ 13.233239] ohci-pci 0001:00:1b.1: OHCI PCI host controller
[ 13.233359] ohci-pci 0001:00:1b.1: new USB bus registered, assigned bus number 6
[ 13.233633] ohci-pci 0001:00:1b.1: irq 63, io mem 0x80083000
[ 13.245781] gem 0002:00:0f.0 enP2p0s15: renamed from eth0 (while UP)
[ 13.326859] [drm] fb mappable at 0xA0040000
[ 13.326940] [drm] vram apper at 0xA0000000
[ 13.326990] [drm] size 8294400
[ 13.327024] [drm] fb depth is 24
[ 13.327055] [drm] pitch is 7680
[ 13.393691] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[ 13.393714] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.393723] usb usb6: Product: OHCI PCI host controller
[ 13.393730] usb usb6: Manufacturer: Linux 6.10.0-rc2-PMacG4 ohci_hcd
[ 13.393737] usb usb6: SerialNumber: 0001:00:1b.1
[ 13.397276] hub 6-0:1.0: USB hub found
[ 13.397365] hub 6-0:1.0: 2 ports detected
[ 13.513548] Console: switching to colour frame buffer device 240x67
[ 13.556048] ADM1030 fan controller [@2c]
[ 13.568277] DS1775 digital thermometer [@49]
[ 13.568296] Temp: 58.8 C
[ 13.568303] Hyst: 70.0 C
[ 13.568308] OS: 75.0 C
[ 13.568312]
[ 13.571918] radeon 0000:00:10.0: [drm] fb0: radeondrmfb frame buffer device
[ 15.059378] EXT4-fs (sda5): re-mounted fa07e66f-b4f9-404f-85d8-487d3c097aec r/w. Quota mode: disabled.
[ 15.156215] EXT4-fs (sda5): re-mounted fa07e66f-b4f9-404f-85d8-487d3c097aec r/w. Quota mode: disabled.
[ 15.694938] Adding 8388604k swap on /dev/sdb6. Priority:-2 extents:1 across:8388604k
[ 15.941947] EXT4-fs (sdc5): mounting ext2 file system using the ext4 subsystem
[ 15.950581] EXT4-fs (sdc5): mounted filesystem e4e8af9e-0f0d-44f9-b983-71bf61d782de r/w without journal. Quota mode: disabled.
[ 15.951232] ext2 filesystem being mounted at /boot supports timestamps until 2038-01-19 (0x7fffffff)
[ 15.953491] BTRFS: device label tmp devid 1 transid 4958 /dev/sda6 (8:6) scanned by mount (876)
[ 15.956820] BTRFS info (device sda6): first mount of filesystem 65162d91-887e-4e48-a356-fbf7093eefb5
[ 15.957224] BTRFS info (device sda6): using xxhash64 (xxhash64-generic) checksum algorithm
[ 15.957577] BTRFS info (device sda6): using free-space-tree
[ 17.029297] random: crng init done
[ 118.547854] CPU-temp: 60.0 C
[ 118.547888] , Case: 36.3 C
[ 118.548071] , Fan: 8 (tuned +1)
[ 142.890240] CPU-temp: 60.1 C
[ 142.890285] , Case: 36.3 C
[ 142.890511] , Fan: 9 (tuned +1)
[ 6248.031032] BTRFS info (device sda6): last unmount of filesystem 65162d91-887e-4e48-a356-fbf7093eefb5
[ 6248.071352] EXT4-fs (sdc5): unmounting filesystem e4e8af9e-0f0d-44f9-b983-71bf61d782de.
[ 6250.868680] elogind-daemon[1510]: Received signal 15 [TERM]
[ 6251.380726] EXT4-fs (sda5): re-mounted fa07e66f-b4f9-404f-85d8-487d3c097aec ro. Quota mode: disabled.
[ 6251.824966] sd 3:0:0:0: [sdc] Stopping disk
[ 6251.825423] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 6251.826329] sd 1:0:0:0: [sdb] Stopping disk
[ 6251.826878] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 6251.827481] sd 0:0:0:0: [sda] Stopping disk
[ 6251.836490] reboot: Power down
[-- Attachment #3: config_610-rc2_g4_2G_no-highmem --]
[-- Type: application/octet-stream, Size: 104262 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/powerpc 6.10.0-rc2 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="gcc (Gentoo 13.2.1_p20240210 p14) 13.2.1 20240210"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=130201
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=24200
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=24200
CONFIG_LLD_VERSION=0
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_GOTO_TIED_OUTPUT=y
CONFIG_GCC_ASM_GOTO_OUTPUT_WORKAROUND=y
CONFIG_TOOLS_SUPPORT_RELR=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=0
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION="-PMacG4"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_XZ is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_WATCH_QUEUE=y
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_DOMAIN_NOMAP=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem
CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y
#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
# CONFIG_BPF_JIT is not set
# CONFIG_BPF_UNPRIV_DEFAULT_OFF is not set
# CONFIG_BPF_PRELOAD is not set
# end of BPF subsystem
CONFIG_PREEMPT_VOLUNTARY_BUILD=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting
CONFIG_CPU_ISOLATION=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_TREE_SRCU=y
CONFIG_NEED_SRCU_NMI_SAFE=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_NEED_TASKS_RCU=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem
# CONFIG_IKCONFIG is not set
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=16
CONFIG_LOG_CPU_MAX_BUF_SHIFT=13
# CONFIG_PRINTK_INDEX is not set
#
# Scheduler features
#
# end of Scheduler features
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC10_NO_ARRAY_BOUNDS=y
CONFIG_CC_NO_ARRAY_BOUNDS=y
CONFIG_GCC_NO_STRINGOP_OVERFLOW=y
CONFIG_CC_NO_STRINGOP_OVERFLOW=y
CONFIG_SLAB_OBJ_EXT=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
# CONFIG_CGROUP_FAVOR_DYNMODS is not set
CONFIG_MEMCG=y
CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_SCHED_MM_CID=y
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
CONFIG_CGROUP_BPF=y
CONFIG_CGROUP_MISC=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_TIME_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
# CONFIG_RD_ZSTD is not set
# CONFIG_BOOT_CONFIG is not set
# CONFIG_INITRAMFS_PRESERVE_MTIME is not set
# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
# CONFIG_LD_DEAD_CODE_DATA_ELIMINATION is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_LD_ORPHAN_WARN_LEVEL="warn"
CONFIG_SYSCTL=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_EXPERT=y
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
# CONFIG_SYSFS_SYSCALL is not set
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_BASE_SMALL is not set
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KCMP=y
CONFIG_RSEQ=y
# CONFIG_DEBUG_RSEQ is not set
CONFIG_CACHESTAT_SYSCALL=y
# CONFIG_PC104 is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_SELFTEST is not set
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_ARCH_HAS_MEMBARRIER_CALLBACKS=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# end of Kernel Performance Events And Counters
# CONFIG_PROFILING is not set
#
# Kexec and crash features
#
# CONFIG_KEXEC is not set
# end of Kexec and crash features
# end of General setup
CONFIG_PPC32=y
# CONFIG_PPC64 is not set
#
# Processor support
#
CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_PPC_BOOK3S_603 is not set
CONFIG_PPC_BOOK3S_604=y
# CONFIG_POWERPC_CPU is not set
# CONFIG_E300C2_CPU is not set
# CONFIG_E300C3_CPU is not set
CONFIG_G4_CPU=y
# CONFIG_TOOLCHAIN_DEFAULT_CPU is not set
CONFIG_TARGET_CPU_BOOL=y
CONFIG_TARGET_CPU="G4"
CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU_REGS=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_KUEP=y
CONFIG_PPC_KUAP=y
# CONFIG_PPC_KUAP_DEBUG is not set
CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_PMU_SYSFS is not set
CONFIG_PPC_PERF_CTRS=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
# end of Processor support
CONFIG_VDSO32=y
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_32BIT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MAX=17
CONFIG_ARCH_MMAP_RND_BITS_MIN=11
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
CONFIG_NR_IRQS=512
CONFIG_NMI_IPI=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_PANIC_TIMEOUT=40
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_TBSYNC=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_HAS_ADD_PAGES=y
# CONFIG_PPC_PCI_OF_BUS_MAP is not set
CONFIG_PPC_PCI_BUS_NUM_DOMAIN_DEPENDENT=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PPC_MSI_BITMAP=y
#
# Platform support
#
# CONFIG_SCOM_DEBUGFS is not set
# CONFIG_PPC_CHRP is not set
# CONFIG_PPC_MPC512x is not set
# CONFIG_PPC_MPC52xx is not set
CONFIG_PPC_PMAC=y
CONFIG_PPC_PMAC32_PSURGE=y
# CONFIG_PPC_82xx is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
CONFIG_KVM_GUEST=y
CONFIG_EPAPR_PARAVIRT=y
CONFIG_PPC_HASH_MMU_NATIVE=y
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_PPC_SMP_MUXED_IPI=y
CONFIG_MPIC=y
CONFIG_MPIC_MSGR=y
CONFIG_PPC_MPC106=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set
#
# CPU frequency scaling drivers
#
# CONFIG_CPUFREQ_DT_PLATDEV is not set
CONFIG_CPU_FREQ_PMAC=y
# end of CPU Frequency scaling
#
# CPUIdle driver
#
#
# CPU Idle
#
# CONFIG_CPU_IDLE is not set
# end of CPU Idle
# end of CPUIdle driver
CONFIG_TAU=y
# CONFIG_TAU_INT is not set
# CONFIG_TAU_AVERAGE is not set
# CONFIG_GEN_RTC is not set
# end of Platform support
#
# Kernel options
#
# CONFIG_HIGHMEM is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
CONFIG_HOTPLUG_CPU=y
# CONFIG_PPC_QUEUED_SPINLOCKS is not set
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_ARCH_SUPPORTS_KEXEC=y
CONFIG_ARCH_SUPPORTS_KEXEC_PURGATORY=y
CONFIG_ARCH_SUPPORTS_CRASH_DUMP=y
CONFIG_IRQ_ALL_CPUS=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_PPC_4K_PAGES=y
CONFIG_THREAD_SHIFT=13
# CONFIG_DATA_SHIFT_BOOL is not set
CONFIG_DATA_SHIFT=22
CONFIG_ARCH_FORCE_MAX_ORDER=10
CONFIG_CMDLINE=""
CONFIG_EXTRA_TARGETS=""
CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_APM_EMULATION=m
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
# CONFIG_ENERGY_MODEL is not set
# end of Kernel options
CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
# CONFIG_FSL_LBC is not set
# end of Bus options
#
# Advanced setup
#
CONFIG_ADVANCED_OPTIONS=y
CONFIG_LOWMEM_SIZE_BOOL=y
CONFIG_LOWMEM_SIZE=0x80000000
CONFIG_PAGE_OFFSET_BOOL=y
CONFIG_PAGE_OFFSET=0x70000000
CONFIG_KERNEL_START_BOOL=y
CONFIG_KERNEL_START=0x70000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE_BOOL=y
CONFIG_TASK_SIZE=0x60000000
# end of Advanced setup
# CONFIG_VIRTUALIZATION is not set
CONFIG_HAVE_LIVEPATCH=y
CONFIG_CPU_MITIGATIONS=y
#
# General architecture-dependent options
#
CONFIG_HOTPLUG_SMT=y
CONFIG_SMT_NUM_THREADS_DYNAMIC=y
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_STATIC_CALL_SELFTEST is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_MMU_GATHER_PAGE_SIZE=y
CONFIG_MMU_GATHER_MERGE_VMAS=y
CONFIG_ARCH_WANT_IRQS_OFF_ACTIVATE_MM=y
CONFIG_MMU_LAZY_TLB_REFCOUNT=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
# CONFIG_SECCOMP_CACHE_DEBUG is not set
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
# CONFIG_STACKPROTECTOR_STRONG is not set
CONFIG_LTO_NONE=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING_USER=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_ARCH_WANTS_MODULES_DATA_IN_VMALLOC=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_ARCH_MMAP_RND_BITS=11
CONFIG_HAVE_PAGE_SIZE_4KB=y
CONFIG_PAGE_SIZE_4KB=y
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_PAGE_SHIFT=12
CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT=y
CONFIG_HAVE_OBJTOOL=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_HAVE_ARCH_NVRAM_OPS=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND=y
CONFIG_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
# CONFIG_VMAP_STACK is not set
CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT=y
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
# CONFIG_STRICT_MODULE_RWX is not set
CONFIG_ARCH_HAS_PHYS_TO_DMA=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_HAVE_STATIC_CALL=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SPLIT_ARG64=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling
CONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not set
CONFIG_FUNCTION_ALIGNMENT_4B=y
CONFIG_FUNCTION_ALIGNMENT=4
# end of General architecture-dependent options
CONFIG_RT_MUTEXES=y
CONFIG_MODULES=y
# CONFIG_MODULE_DEBUG is not set
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODULE_UNLOAD_TAINT_TRACKING is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
CONFIG_MODPROBE_PATH="/sbin/modprobe"
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
CONFIG_BLK_CGROUP_RWSTAT=y
CONFIG_BLK_CGROUP_PUNT_BIO=y
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_ICQ=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_WRITE_MOUNTED is not set
# CONFIG_BLK_DEV_ZONED is not set
# CONFIG_BLK_DEV_THROTTLING is not set
CONFIG_BLK_WBT=y
CONFIG_BLK_WBT_MQ=y
# CONFIG_BLK_CGROUP_IOLATENCY is not set
# CONFIG_BLK_CGROUP_IOCOST is not set
# CONFIG_BLK_CGROUP_IOPRIO is not set
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set
# CONFIG_BLK_INLINE_ENCRYPTION is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
CONFIG_BLK_MQ_STACKING=y
#
# IO Schedulers
#
# CONFIG_MQ_IOSCHED_DEADLINE is not set
# CONFIG_MQ_IOSCHED_KYBER is not set
CONFIG_IOSCHED_BFQ=y
CONFIG_BFQ_GROUP_IOSCHED=y
# CONFIG_BFQ_CGROUP_DEBUG is not set
# end of IO Schedulers
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
# end of Executable file formats
#
# Memory Management options
#
CONFIG_ZPOOL=y
CONFIG_SWAP=y
CONFIG_ZSWAP=y
CONFIG_ZSWAP_DEFAULT_ON=y
CONFIG_ZSWAP_SHRINKER_DEFAULT_ON=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo"
# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD is not set
# CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set
CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC=y
CONFIG_ZSWAP_ZPOOL_DEFAULT="zsmalloc"
# CONFIG_ZBUD is not set
# CONFIG_Z3FOLD is not set
CONFIG_ZSMALLOC=y
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_ZSMALLOC_CHAIN_SIZE=8
#
# Slab allocator options
#
CONFIG_SLUB=y
# CONFIG_SLUB_TINY is not set
# CONFIG_SLAB_MERGE_DEFAULT is not set
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLAB_FREELIST_HARDENED=y
# CONFIG_SLUB_STATS is not set
# CONFIG_SLUB_CPU_PARTIAL is not set
# CONFIG_RANDOM_KMALLOC_CACHES is not set
# end of Slab allocator options
CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
# CONFIG_COMPAT_BRK is not set
CONFIG_FLATMEM=y
CONFIG_HAVE_GUP_FAST=y
CONFIG_ARCH_KEEP_MEMBLOCK=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
CONFIG_PAGE_REPORTING=y
CONFIG_MIGRATION=y
CONFIG_PCP_BATCH_SCALE_MAX=5
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=16384
# CONFIG_CMA is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ZONE_DMA=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not set
# CONFIG_DMAPOOL_TEST is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_MEMFD_CREATE=y
# CONFIG_ANON_VMA_NAME is not set
CONFIG_USERFAULTFD=y
CONFIG_LRU_GEN=y
CONFIG_LRU_GEN_ENABLED=y
# CONFIG_LRU_GEN_STATS is not set
CONFIG_LOCK_MM_AND_FIND_VMA=y
CONFIG_EXECMEM=y
#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options
CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_NET_XGRESS=y
CONFIG_SKB_DECRYPTED=y
CONFIG_SKB_EXTENSIONS=y
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_AF_UNIX_OOB=y
CONFIG_UNIX_DIAG=m
CONFIG_TLS=m
CONFIG_TLS_DEVICE=y
# CONFIG_TLS_TOE is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=m
CONFIG_XFRM_USER=m
# CONFIG_XFRM_INTERFACE is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_AH=m
CONFIG_XFRM_ESP=m
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
# CONFIG_XDP_SOCKETS is not set
CONFIG_NET_HANDSHAKE=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=m
CONFIG_SYN_COOKIES=y
# CONFIG_NET_IPVTI is not set
CONFIG_NET_UDP_TUNNEL=m
# CONFIG_NET_FOU is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
# CONFIG_INET_ESP_OFFLOAD is not set
# CONFIG_INET_ESPINTCP is not set
CONFIG_INET_IPCOMP=m
CONFIG_INET_TABLE_PERTURB_ORDER=16
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
# CONFIG_TCP_CONG_CUBIC is not set
CONFIG_TCP_CONG_WESTWOOD=y
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_NV is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_TCP_CONG_DCTCP is not set
# CONFIG_TCP_CONG_CDG is not set
# CONFIG_TCP_CONG_BBR is not set
CONFIG_DEFAULT_WESTWOOD=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="westwood"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
# CONFIG_INET6_ESP_OFFLOAD is not set
# CONFIG_INET6_ESPINTCP is not set
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
# CONFIG_IPV6_VTI is not set
# CONFIG_IPV6_SIT is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_IPV6_RPL_LWTUNNEL is not set
# CONFIG_IPV6_IOAM6_LWTUNNEL is not set
# CONFIG_NETLABEL is not set
# CONFIG_MPTCP is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_COOKIE_HMAC_SHA1 is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_BRIDGE_MRP is not set
# CONFIG_BRIDGE_CFM is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_CBS is not set
# CONFIG_NET_SCH_ETF is not set
# CONFIG_NET_SCH_TAPRIO is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_SKBPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
# CONFIG_NET_SCH_CODEL is not set
CONFIG_NET_SCH_FQ_CODEL=y
# CONFIG_NET_SCH_CAKE is not set
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
# CONFIG_NET_SCH_PLUG is not set
# CONFIG_NET_SCH_ETS is not set
CONFIG_NET_SCH_DEFAULT=y
CONFIG_DEFAULT_FQ_CODEL=y
# CONFIG_DEFAULT_PFIFO_FAST is not set
CONFIG_DEFAULT_NET_SCH="fq_codel"
#
# Classification
#
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_CLS_CGROUP is not set
# CONFIG_NET_CLS_BPF is not set
# CONFIG_NET_CLS_FLOWER is not set
# CONFIG_NET_CLS_MATCHALL is not set
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
CONFIG_VSOCKETS=m
CONFIG_VSOCKETS_DIAG=m
# CONFIG_VSOCKETS_LOOPBACK is not set
# CONFIG_VIRTIO_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_NET_NSH is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_QRTR is not set
# CONFIG_NET_NCSI is not set
CONFIG_PCPU_DEV_REFCNT=y
CONFIG_MAX_SKB_FRAGS=17
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_STREAM_PARSER=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# end of Network testing
# end of Networking options
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_STREAM_PARSER=y
# CONFIG_MCTP is not set
# CONFIG_WIRELESS is not set
# CONFIG_RFKILL is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_FD=y
CONFIG_NET_9P_VIRTIO=y
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_SOCK_VALIDATE_XMIT=y
CONFIG_NET_SOCK_MSG=y
CONFIG_PAGE_POOL=y
# CONFIG_PAGE_POOL_STATS is not set
CONFIG_FAILOVER=y
CONFIG_ETHTOOL_NETLINK=y
#
# Device Drivers
#
CONFIG_HAVE_PCI=y
CONFIG_FORCE_PCI=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCIEASPM is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_ARCH_FALLBACKS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_PCI_DYNAMIC_OF_NODES=y
# CONFIG_PCIE_BUS_TUNE_OFF is not set
CONFIG_PCIE_BUS_DEFAULT=y
# CONFIG_PCIE_BUS_SAFE is not set
# CONFIG_PCIE_BUS_PERFORMANCE is not set
# CONFIG_PCIE_BUS_PEER2PEER is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=4
# CONFIG_HOTPLUG_PCI is not set
#
# PCI controller drivers
#
# CONFIG_PCI_FTPCI100 is not set
# CONFIG_PCI_HOST_GENERIC is not set
# CONFIG_PCIE_MICROCHIP_HOST is not set
# CONFIG_PCIE_XILINX is not set
#
# Cadence-based PCIe controllers
#
# CONFIG_PCIE_CADENCE_PLAT_HOST is not set
# end of Cadence-based PCIe controllers
#
# DesignWare-based PCIe controllers
#
# CONFIG_PCI_MESON is not set
# CONFIG_PCIE_DW_PLAT_HOST is not set
# end of DesignWare-based PCIe controllers
#
# Mobiveil-based PCIe controllers
#
# end of Mobiveil-based PCIe controllers
# end of PCI controller drivers
#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint
#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers
# CONFIG_CXL_BUS is not set
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set
#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_DEVTMPFS_SAFE=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
CONFIG_FW_LOADER_COMPRESS=y
# CONFIG_FW_LOADER_COMPRESS_XZ is not set
CONFIG_FW_LOADER_COMPRESS_ZSTD=y
# CONFIG_FW_UPLOAD is not set
# end of Firmware loader
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_DMA_FENCE_TRACE=y
# CONFIG_FW_DEVLINK_SYNC_STATE_TIMEOUT is not set
# end of Generic Driver Options
#
# Bus devices
#
# CONFIG_MHI_BUS is not set
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices
#
# Cache Drivers
#
# end of Cache Drivers
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
#
# Firmware Drivers
#
#
# ARM System Control and Management Interface Protocol
#
# end of ARM System Control and Management Interface Protocol
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_FW_CFG_SYSFS=m
# CONFIG_FW_CFG_SYSFS_CMDLINE is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# Qualcomm firmware drivers
#
# end of Qualcomm firmware drivers
#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers
# CONFIG_GNSS is not set
# CONFIG_MTD is not set
CONFIG_DTC=y
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
# CONFIG_OF_OVERLAY is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_FD is not set
# CONFIG_MAC_FLOPPY is not set
CONFIG_CDROM=y
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_ZRAM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_UBLK is not set
#
# NVME Support
#
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_NVME_FC is not set
# CONFIG_NVME_TCP is not set
# CONFIG_NVME_TARGET is not set
# end of NVME Support
#
# Misc devices
#
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_PHANTOM is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_SRAM is not set
# CONFIG_DW_XDATA_PCIE is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
# CONFIG_OPEN_DICE is not set
# CONFIG_VCPU_STALL_DETECTOR is not set
# CONFIG_NSM is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support
# CONFIG_CB710_CORE is not set
#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline
# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_ALTERA_STAPL is not set
# CONFIG_ECHO is not set
# CONFIG_BCM_VK is not set
# CONFIG_MISC_ALCOR_PCI is not set
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_MISC_RTSX_USB is not set
CONFIG_PVPANIC=y
CONFIG_PVPANIC_MMIO=m
CONFIG_PVPANIC_PCI=m
# end of Misc devices
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=m
CONFIG_BLK_DEV_BSG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# end of SCSI Transports
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_MPI3MR is not set
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FDOMAIN_PCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_WD719X is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_MESH is not set
# CONFIG_SCSI_MAC53C94 is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
CONFIG_SCSI_VIRTIO=y
# CONFIG_SCSI_DH is not set
# end of SCSI device support
CONFIG_ATA=y
CONFIG_SATA_HOST=y
CONFIG_ATA_VERBOSE_ERROR=y
# CONFIG_ATA_FORCE is not set
# CONFIG_SATA_PMP is not set
#
# Controllers with non-SFF native interface
#
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_AHCI_DWC is not set
# CONFIG_AHCI_CEVA is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
CONFIG_SATA_SIL=y
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
CONFIG_PATA_MACIO=y
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OF_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_BITMAP_FILE is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=m
CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING=y
# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_UNSTRIPED is not set
CONFIG_DM_CRYPT=m
# CONFIG_DM_SNAPSHOT is not set
CONFIG_DM_THIN_PROVISIONING=m
# CONFIG_DM_CACHE is not set
# CONFIG_DM_WRITECACHE is not set
# CONFIG_DM_EBS is not set
# CONFIG_DM_ERA is not set
# CONFIG_DM_CLONE is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_RAID is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_DUST is not set
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_DM_LOG_WRITES is not set
# CONFIG_DM_INTEGRITY is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_ADB=y
# CONFIG_ADB_CUDA is not set
CONFIG_ADB_PMU=y
CONFIG_ADB_PMU_EVENT=y
CONFIG_ADB_PMU_LED=y
# CONFIG_ADB_PMU_LED_DISK is not set
CONFIG_PMAC_APM_EMU=m
CONFIG_PMAC_MEDIABAY=y
# CONFIG_PMAC_BACKLIGHT is not set
CONFIG_INPUT_ADBHID=y
CONFIG_MAC_EMUMOUSEBTN=m
CONFIG_THERM_WINDTUNNEL=m
CONFIG_THERM_ADT746X=m
CONFIG_WINDFARM=m
# CONFIG_PMAC_RACKMETER is not set
CONFIG_SENSORS_AMS=m
CONFIG_SENSORS_AMS_PMU=y
CONFIG_SENSORS_AMS_I2C=y
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_WIREGUARD is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_GENEVE is not set
# CONFIG_BAREUDP is not set
# CONFIG_GTP is not set
# CONFIG_PFCP is not set
# CONFIG_MACSEC is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_EXTENDED_LOG is not set
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
CONFIG_VIRTIO_NET=y
# CONFIG_NLMON is not set
# CONFIG_NETKIT is not set
CONFIG_SUNGEM_PHY=y
# CONFIG_ARCNET is not set
CONFIG_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_AGERE is not set
# CONFIG_NET_VENDOR_ALACRITECH is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
# CONFIG_NET_VENDOR_AMAZON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_APPLE is not set
# CONFIG_NET_VENDOR_AQUANTIA is not set
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_ASIX is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CADENCE is not set
# CONFIG_NET_VENDOR_CAVIUM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_NET_VENDOR_CORTINA is not set
# CONFIG_NET_VENDOR_DAVICOM is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_ENGLEDER is not set
# CONFIG_NET_VENDOR_EZCHIP is not set
# CONFIG_NET_VENDOR_FUNGIBLE is not set
# CONFIG_NET_VENDOR_GOOGLE is not set
# CONFIG_NET_VENDOR_HUAWEI is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_JME is not set
# CONFIG_NET_VENDOR_LITEX is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_MICROSEMI is not set
# CONFIG_NET_VENDOR_MICROSOFT is not set
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NI is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NETERION is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_VENDOR_PACKET_ENGINES is not set
# CONFIG_NET_VENDOR_PENSANDO is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
# CONFIG_NET_VENDOR_BROCADE is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_RDC is not set
# CONFIG_NET_VENDOR_REALTEK is not set
# CONFIG_NET_VENDOR_RENESAS is not set
# CONFIG_NET_VENDOR_ROCKER is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_NET_VENDOR_SOLARFLARE is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_SOCIONEXT is not set
# CONFIG_NET_VENDOR_STMICRO is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
CONFIG_SUNGEM=y
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VERTEXCOM is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WANGXUN is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_NET_VENDOR_XILINX is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PHYLIB is not set
# CONFIG_MDIO_DEVICE is not set
#
# PCS device drivers
#
# end of PCS device drivers
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_USB_NET_DRIVERS is not set
# CONFIG_WLAN is not set
# CONFIG_WAN is not set
#
# Wireless WAN
#
# CONFIG_WWAN is not set
# end of Wireless WAN
# CONFIG_VMXNET3 is not set
# CONFIG_NETDEVSIM is not set
CONFIG_NET_FAILOVER=y
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
# CONFIG_INPUT_APMPOWER is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_APPLETOUCH=m
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_AS5011 is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
CONFIG_JOYSTICK_XPAD=m
# CONFIG_JOYSTICK_XPAD_FF is not set
CONFIG_JOYSTICK_XPAD_LEDS=y
# CONFIG_JOYSTICK_PXRC is not set
# CONFIG_JOYSTICK_QWIIC is not set
# CONFIG_JOYSTICK_FSIA6B is not set
# CONFIG_JOYSTICK_SENSEHAT is not set
# CONFIG_JOYSTICK_SEESAW is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_ATMEL_CAPTOUCH is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_DA7280_HAPTICS is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_IQS269A is not set
# CONFIG_INPUT_IQS626A is not set
# CONFIG_INPUT_IQS7222 is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_RMI4_CORE is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports
# end of Input device support
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_LEGACY_TIOCSTI is not set
CONFIG_LDISC_AUTOLOAD=y
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
# CONFIG_SERIAL_8250_16550A_VARIANTS is not set
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCILIB=y
CONFIG_SERIAL_8250_PCI=y
# CONFIG_SERIAL_8250_EXAR is not set
CONFIG_SERIAL_8250_NR_UARTS=8
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_PCI1XXXX is not set
CONFIG_SERIAL_8250_FSL=y
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
# CONFIG_SERIAL_8250_PERICOM is not set
CONFIG_SERIAL_OF_PLATFORM=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_PMACZILOG is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SIFIVE is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX_CORE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
# end of Serial drivers
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_PPC_EPAPR_HV_BYTECHAN is not set
# CONFIG_N_GSM is not set
# CONFIG_NOZOMI is not set
# CONFIG_NULL_TTY is not set
CONFIG_HVC_DRIVER=y
# CONFIG_HVC_UDBG is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_BA431 is not set
CONFIG_HW_RANDOM_VIRTIO=m
# CONFIG_HW_RANDOM_CCTRNG is not set
# CONFIG_HW_RANDOM_XIPHERA is not set
# CONFIG_APPLICOM is not set
CONFIG_DEVMEM=y
CONFIG_NVRAM=m
CONFIG_DEVPORT=y
# CONFIG_TCG_TPM is not set
# CONFIG_XILLYBUS is not set
# CONFIG_XILLYUSB is not set
# end of Character devices
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=m
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_NVIDIA_GPU is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# Mac SMBus host controller drivers
#
CONFIG_I2C_POWERMAC=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_MPC is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_CP2615 is not set
# CONFIG_I2C_PCI1XXXX is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_VIRTIO is not set
# end of I2C Hardware Bus support
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support
# CONFIG_I3C is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
# CONFIG_PPS is not set
#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support
# CONFIG_PINCTRL is not set
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_APM_POWER=m
# CONFIG_IP5XXX_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_CW2015 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
CONFIG_BATTERY_PMU=m
# CONFIG_BATTERY_SAMSUNG_SDI is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_LTC4162L is not set
# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
# CONFIG_CHARGER_MAX77976 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_BATTERY_GOLDFISH is not set
# CONFIG_BATTERY_RT5033 is not set
# CONFIG_CHARGER_BD99954 is not set
# CONFIG_BATTERY_UG3105 is not set
# CONFIG_FUEL_GAUGE_MM8013 is not set
CONFIG_HWMON=m
CONFIG_HWMON_DEBUG_CHIP=y
#
# Native drivers
#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM1177 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_AHT10 is not set
# CONFIG_SENSORS_AQUACOMPUTER_D5NEXT is not set
# CONFIG_SENSORS_AS370 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ASUS_ROG_RYUJIN is not set
# CONFIG_SENSORS_AXI_FAN_CONTROL is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_CHIPCAP2 is not set
# CONFIG_SENSORS_CORSAIR_CPRO is not set
# CONFIG_SENSORS_CORSAIR_PSU is not set
CONFIG_SENSORS_DRIVETEMP=m
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GIGABYTE_WATERFORCE is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_HS3001 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWERZ is not set
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2947_I2C is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC2991 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_LTC4282 is not set
# CONFIG_SENSORS_MAX127 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX31730 is not set
# CONFIG_SENSORS_MAX31760 is not set
# CONFIG_MAX31827 is not set
# CONFIG_SENSORS_MAX6620 is not set
# CONFIG_SENSORS_MAX6621 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MC34VR500 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_TPS23861 is not set
# CONFIG_SENSORS_MR75203 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_NCT6775_I2C is not set
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NPCM7XX is not set
# CONFIG_SENSORS_NZXT_KRAKEN2 is not set
# CONFIG_SENSORS_NZXT_KRAKEN3 is not set
# CONFIG_SENSORS_NZXT_SMART2 is not set
# CONFIG_SENSORS_OCC_P8_I2C is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_PT5161L is not set
# CONFIG_SENSORS_SBTSI is not set
# CONFIG_SENSORS_SBRMI is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHT4x is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC2305 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA238 is not set
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_TMP464 is not set
# CONFIG_SENSORS_TMP513 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83773G is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_ACT8945A is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_SMPRO is not set
# CONFIG_MFD_AS3722 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_CS42L43_I2C is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_MFD_MAX5970 is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_GATEWORKS_GSC is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_MP2629 is not set
# CONFIG_MFD_HI6421_PMIC is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_IQS62X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77541 is not set
# CONFIG_MFD_MAX77620 is not set
# CONFIG_MFD_MAX77650 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77714 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6370 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_NTXEC is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_SY7636A is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT4831 is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RT5120 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_RK8XX_I2C is not set
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TI_LP87565 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS65219 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS6594_I2C is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_LOCHNAGAR is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_ROHM_BD718XX is not set
# CONFIG_MFD_ROHM_BD71828 is not set
# CONFIG_MFD_ROHM_BD957XMUF is not set
# CONFIG_MFD_STPMIC1 is not set
# CONFIG_MFD_STMFX is not set
# CONFIG_MFD_ATC260X_I2C is not set
# CONFIG_MFD_QCOM_PM8008 is not set
# CONFIG_MFD_RSMU_I2C is not set
# end of Multifunction device drivers
# CONFIG_REGULATOR is not set
# CONFIG_RC_CORE is not set
#
# CEC support
#
# CONFIG_MEDIA_CEC_SUPPORT is not set
# end of CEC support
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_APERTURE_HELPERS=y
CONFIG_VIDEO=y
# CONFIG_AUXDISPLAY is not set
# CONFIG_AGP is not set
CONFIG_DRM=y
# CONFIG_DRM_DEBUG_MM is not set
CONFIG_DRM_KMS_HELPER=y
# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set
CONFIG_DRM_DEBUG_MODESET_LOCK=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_DISPLAY_HELPER=m
# CONFIG_DRM_DISPLAY_DP_AUX_CEC is not set
# CONFIG_DRM_DISPLAY_DP_AUX_CHARDEV is not set
CONFIG_DRM_DISPLAY_DP_HELPER=y
CONFIG_DRM_TTM=m
CONFIG_DRM_VRAM_HELPER=m
CONFIG_DRM_TTM_HELPER=m
CONFIG_DRM_GEM_SHMEM_HELPER=m
CONFIG_DRM_SUBALLOC_HELPER=m
#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# end of I2C encoder or helper chips
#
# ARM devices
#
# end of ARM devices
CONFIG_DRM_RADEON=m
CONFIG_DRM_RADEON_USERPTR=y
# CONFIG_DRM_AMDGPU is not set
# CONFIG_DRM_NOUVEAU is not set
# CONFIG_DRM_XE is not set
CONFIG_DRM_VGEM=m
# CONFIG_DRM_VKMS is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_QXL is not set
CONFIG_DRM_VIRTIO_GPU=m
CONFIG_DRM_VIRTIO_GPU_KMS=y
CONFIG_DRM_PANEL=y
#
# Display Panels
#
# CONFIG_DRM_PANEL_LVDS is not set
# CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 is not set
# CONFIG_DRM_PANEL_SAMSUNG_ATNA33XC20 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6D7AA0 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E63M0 is not set
# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set
# CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set
# CONFIG_DRM_PANEL_EDP is not set
# CONFIG_DRM_PANEL_SIMPLE is not set
# end of Display Panels
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y
#
# Display Interface Bridges
#
# CONFIG_DRM_CHIPONE_ICN6211 is not set
# CONFIG_DRM_CHRONTEL_CH7033 is not set
# CONFIG_DRM_DISPLAY_CONNECTOR is not set
# CONFIG_DRM_ITE_IT6505 is not set
# CONFIG_DRM_LONTIUM_LT8912B is not set
# CONFIG_DRM_LONTIUM_LT9211 is not set
# CONFIG_DRM_LONTIUM_LT9611 is not set
# CONFIG_DRM_LONTIUM_LT9611UXC is not set
# CONFIG_DRM_ITE_IT66121 is not set
# CONFIG_DRM_LVDS_CODEC is not set
# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set
# CONFIG_DRM_NXP_PTN3460 is not set
# CONFIG_DRM_PARADE_PS8622 is not set
# CONFIG_DRM_PARADE_PS8640 is not set
# CONFIG_DRM_SIL_SII8620 is not set
# CONFIG_DRM_SII902X is not set
# CONFIG_DRM_SII9234 is not set
# CONFIG_DRM_SIMPLE_BRIDGE is not set
# CONFIG_DRM_THINE_THC63LVD1024 is not set
# CONFIG_DRM_TOSHIBA_TC358762 is not set
# CONFIG_DRM_TOSHIBA_TC358764 is not set
# CONFIG_DRM_TOSHIBA_TC358767 is not set
# CONFIG_DRM_TOSHIBA_TC358768 is not set
# CONFIG_DRM_TOSHIBA_TC358775 is not set
# CONFIG_DRM_TI_DLPC3433 is not set
# CONFIG_DRM_TI_TFP410 is not set
# CONFIG_DRM_TI_SN65DSI83 is not set
# CONFIG_DRM_TI_SN65DSI86 is not set
# CONFIG_DRM_TI_TPD12S015 is not set
# CONFIG_DRM_ANALOGIX_ANX6345 is not set
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_ANALOGIX_ANX7625 is not set
# CONFIG_DRM_I2C_ADV7511 is not set
# CONFIG_DRM_CDNS_DSI is not set
# CONFIG_DRM_CDNS_MHDP8546 is not set
# end of Display Interface Bridges
# CONFIG_DRM_ETNAVIV is not set
# CONFIG_DRM_LOGICVC is not set
# CONFIG_DRM_ARCPGU is not set
CONFIG_DRM_BOCHS=m
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_GM12U320 is not set
# CONFIG_DRM_OFDRM is not set
# CONFIG_DRM_SIMPLEDRM is not set
# CONFIG_DRM_GUD is not set
# CONFIG_DRM_SSD130X is not set
CONFIG_DRM_WERROR=y
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
#
# Frame buffer Devices
#
CONFIG_FB=y
CONFIG_FB_MACMODES=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_OF=y
# CONFIG_FB_CONTROL is not set
# CONFIG_FB_PLATINUM is not set
# CONFIG_FB_VALKYRIE is not set
CONFIG_FB_CT65550=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SM712 is not set
CONFIG_FB_CORE=y
CONFIG_FB_NOTIFY=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DEVICE is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYSMEM_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_IOMEM_FOPS=y
CONFIG_FB_IOMEM_HELPERS=y
CONFIG_FB_SYSMEM_HELPERS=y
CONFIG_FB_SYSMEM_HELPERS_DEFERRED=y
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# end of Frame buffer Devices
#
# Backlight & LCD device support
#
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=m
# CONFIG_BACKLIGHT_KTD2801 is not set
# CONFIG_BACKLIGHT_KTZ8866 is not set
# CONFIG_BACKLIGHT_QCOM_WLED is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
CONFIG_BACKLIGHT_LED=m
# end of Backlight & LCD device support
CONFIG_HDMI=y
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION is not set
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
# end of Console display driver support
# CONFIG_LOGO is not set
# end of Graphics support
# CONFIG_DRM_ACCEL is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACCUTOUCH is not set
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=y
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_ASUS is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_BIGBEN_FF is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_MACALLY is not set
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CREATIVE_SB0540 is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELAN is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
# CONFIG_HID_EVISION is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_FT260 is not set
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_GLORIOUS is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_GOOGLE_STADIA_FF is not set
# CONFIG_HID_VIVALDI is not set
# CONFIG_HID_GT683R is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
CONFIG_HID_UCLOGIC=m
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_VRC2 is not set
# CONFIG_HID_XIAOMI is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_ITE is not set
# CONFIG_HID_JABRA is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LED is not set
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_LETSKETCH is not set
# CONFIG_HID_LOGITECH is not set
CONFIG_HID_MAGICMOUSE=y
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_MEGAWORLD_FF is not set
# CONFIG_HID_REDRAGON is not set
CONFIG_HID_MICROSOFT=m
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
CONFIG_HID_NINTENDO=m
# CONFIG_NINTENDO_FF is not set
# CONFIG_HID_NTI is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PENMOUNT is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PXRC is not set
# CONFIG_HID_RAZER is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_RETRODE is not set
CONFIG_HID_ROCCAT=m
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SEMITEK is not set
# CONFIG_HID_SIGMAMICRO is not set
CONFIG_HID_SONY=m
# CONFIG_SONY_FF is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEAM is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_TOPRE is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_U2FZERO is not set
# CONFIG_HID_WACOM is not set
CONFIG_HID_WIIMOTE=m
# CONFIG_HID_WINWING is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set
# CONFIG_HID_MCP2221 is not set
# end of Special HID drivers
#
# HID-BPF support
#
# end of HID-BPF support
#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
# end of USB HID support
# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_PCI=y
# CONFIG_USB_PCI_AMD is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_FEW_INIT_RETRIES is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_PRODUCTLIST is not set
# CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB is not set
# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_DEFAULT_AUTHORIZATION_MODE=1
CONFIG_USB_MON=m
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=y
# CONFIG_XPS_USB_HCD_XILINX is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=m
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_TEST_MODE is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
CONFIG_USB_UAS=m
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
#
# USB dual-mode controller drivers
#
# CONFIG_USB_CDNS_SUPPORT is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set
#
# USB port drivers
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_SIMPLE is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_F8153X is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MXUPORT is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_XSENS_MT is not set
# CONFIG_USB_SERIAL_WISHBONE is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_QT2 is not set
# CONFIG_USB_SERIAL_UPD78F0730 is not set
# CONFIG_USB_SERIAL_XR is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
CONFIG_USB_APPLEDISPLAY=m
# CONFIG_APPLE_MFI_FASTCHARGE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
CONFIG_USB_ISIGHTFW=m
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HUB_USB251XB is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
# CONFIG_USB_ONBOARD_DEV is not set
#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_ISP1301 is not set
# end of USB Physical Layer drivers
# CONFIG_USB_GADGET is not set
# CONFIG_TYPEC is not set
# CONFIG_USB_ROLE_SWITCH is not set
# CONFIG_MMC is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_CLASS_MULTICOLOR is not set
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
#
# LED drivers
#
# CONFIG_LEDS_AN30259A is not set
# CONFIG_LEDS_AW200XX is not set
# CONFIG_LEDS_AW2013 is not set
# CONFIG_LEDS_BCM6328 is not set
# CONFIG_LEDS_BCM6358 is not set
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3532 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_LM3692X is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP8860 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_PCA995X is not set
# CONFIG_LEDS_BD2606MVV is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_IS31FL319X is not set
# CONFIG_LEDS_IS31FL32XX is not set
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_LM3697 is not set
#
# Flash and Torch LED drivers
#
#
# RGB LED drivers
#
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
CONFIG_LEDS_TRIGGER_DISK=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_LEDS_TRIGGER_CAMERA is not set
CONFIG_LEDS_TRIGGER_PANIC=y
# CONFIG_LEDS_TRIGGER_NETDEV is not set
# CONFIG_LEDS_TRIGGER_PATTERN is not set
# CONFIG_LEDS_TRIGGER_TTY is not set
#
# Simple LED drivers
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABEOZ9 is not set
# CONFIG_RTC_DRV_ABX80X is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_HYM8563 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_NCT3018Y is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_ISL12026 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8111 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3028 is not set
# CONFIG_RTC_DRV_RV3032 is not set
# CONFIG_RTC_DRV_RV8803 is not set
# CONFIG_RTC_DRV_SD3078 is not set
#
# SPI RTC drivers
#
CONFIG_RTC_I2C_AND_SPI=y
#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
# CONFIG_RTC_DRV_RX6110 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_ZYNQMP is not set
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_GENERIC=y
# CONFIG_RTC_DRV_CADENCE is not set
# CONFIG_RTC_DRV_FTRTC010 is not set
# CONFIG_RTC_DRV_R7301 is not set
#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_GOLDFISH is not set
# CONFIG_DMADEVICES is not set
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
CONFIG_UDMABUF=y
# CONFIG_DMABUF_MOVE_NOTIFY is not set
CONFIG_DMABUF_DEBUG=y
CONFIG_DMABUF_SELFTESTS=m
CONFIG_DMABUF_HEAPS=y
# CONFIG_DMABUF_SYSFS_STATS is not set
CONFIG_DMABUF_HEAPS_SYSTEM=y
# end of DMABUF options
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
CONFIG_VIRT_DRIVERS=y
# CONFIG_VMGENID is not set
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_PCI_LIB=y
CONFIG_VIRTIO_PCI_LIB_LEGACY=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_PCI_LEGACY=y
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VIRTIO_INPUT is not set
# CONFIG_VIRTIO_MMIO is not set
CONFIG_VIRTIO_DMA_SHARED_BUFFER=m
# CONFIG_VIRTIO_DEBUG is not set
# CONFIG_VDPA is not set
CONFIG_VHOST_IOTLB=m
CONFIG_VHOST_TASK=y
CONFIG_VHOST=m
CONFIG_VHOST_MENU=y
CONFIG_VHOST_NET=m
# CONFIG_VHOST_VSOCK is not set
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support
# CONFIG_GREYBUS is not set
# CONFIG_COMEDI is not set
# CONFIG_STAGING is not set
# CONFIG_GOLDFISH is not set
# CONFIG_COMMON_CLK is not set
# CONFIG_HWSPINLOCK is not set
#
# Clock Source drivers
#
# end of Clock Source drivers
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
# end of Generic IOMMU Pagetable Support
# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMUFD is not set
#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers
#
# Rpmsg drivers
#
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers
# CONFIG_SOUNDWIRE is not set
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers
#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers
#
# NXP/Freescale QorIQ SoC drivers
#
# CONFIG_QUICC_ENGINE is not set
# end of NXP/Freescale QorIQ SoC drivers
#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers
#
# i.MX SoC drivers
#
# end of i.MX SoC drivers
#
# Enable LiteX SoC Builder specific drivers
#
# CONFIG_LITEX_SOC_CONTROLLER is not set
# end of Enable LiteX SoC Builder specific drivers
# CONFIG_WPCM450_SOC is not set
#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers
# CONFIG_SOC_TI is not set
#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers
#
# PM Domains
#
#
# Amlogic PM Domains
#
# end of Amlogic PM Domains
#
# Broadcom PM Domains
#
# end of Broadcom PM Domains
#
# i.MX PM Domains
#
# end of i.MX PM Domains
#
# Qualcomm PM Domains
#
# end of Qualcomm PM Domains
# end of PM Domains
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_PWM is not set
#
# IRQ chip support
#
CONFIG_IRQCHIP=y
# CONFIG_AL_FIC is not set
# CONFIG_XILINX_INTC is not set
# end of IRQ chip support
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_PHY_CAN_TRANSCEIVER is not set
#
# PHY drivers for Broadcom platforms
#
# CONFIG_BCM_KONA_USB2_PHY is not set
# end of PHY drivers for Broadcom platforms
# CONFIG_PHY_CADENCE_DPHY is not set
# CONFIG_PHY_CADENCE_DPHY_RX is not set
# CONFIG_PHY_CADENCE_SALVO is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# end of PHY Subsystem
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
#
# Performance monitor support
#
# CONFIG_DWC_PCIE_PMU is not set
# end of Performance monitor support
# CONFIG_RAS is not set
# CONFIG_USB4 is not set
#
# Android
#
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android
# CONFIG_DAX is not set
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
CONFIG_NVMEM_LAYOUTS=y
#
# Layout Types
#
# CONFIG_NVMEM_LAYOUT_SL28_VPD is not set
# CONFIG_NVMEM_LAYOUT_ONIE_TLV is not set
# end of Layout Types
# CONFIG_NVMEM_RMEM is not set
#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# end of HW tracing support
# CONFIG_FPGA is not set
# CONFIG_FSI is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# CONFIG_MOST is not set
# CONFIG_PECI is not set
# CONFIG_HTE is not set
# end of Device Drivers
#
# File systems
#
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
CONFIG_FS_STACK=y
CONFIG_BUFFER_HEAD=y
CONFIG_LEGACY_DIRECT_IO=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_SUPPORT_V4 is not set
# CONFIG_XFS_SUPPORT_ASCII_CI is not set
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_ONLINE_SCRUB is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_FS_REF_VERIFY is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
# CONFIG_BCACHEFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=m
# CONFIG_CUSE is not set
CONFIG_VIRTIO_FS=m
CONFIG_FUSE_PASSTHROUGH=y
# CONFIG_OVERLAY_FS is not set
#
# Caches
#
CONFIG_NETFS_SUPPORT=y
# CONFIG_NETFS_STATS is not set
# CONFIG_FSCACHE is not set
# end of Caches
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
# end of CD-ROM/DVD Filesystems
#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
CONFIG_FAT_DEFAULT_UTF8=y
CONFIG_EXFAT_FS=m
CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8"
CONFIG_NTFS3_FS=m
CONFIG_NTFS3_LZX_XPRESS=y
# CONFIG_NTFS3_FS_POSIX_ACL is not set
# CONFIG_NTFS_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_TMPFS_QUOTA is not set
CONFIG_CONFIGFS_FS=m
# end of Pseudo filesystems
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
# CONFIG_ECRYPT_FS is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
CONFIG_BEFS_DEBUG=y
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EROFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
# CONFIG_NFS_V2 is not set
# CONFIG_NFS_V3 is not set
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_PNFS_FLEXFILE_LAYOUT=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
CONFIG_NFS_V4_SECURITY_LABEL=y
# CONFIG_NFS_FSCACHE is not set
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFS_DISABLE_UDP_SUPPORT=y
# CONFIG_NFS_V4_2_READ_PLUS is not set
# CONFIG_NFSD is not set
CONFIG_GRACE_PERIOD=m
CONFIG_LOCKD=m
CONFIG_NFS_COMMON=y
CONFIG_NFS_V4_2_SSC_HELPER=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_BACKCHANNEL=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
CONFIG_SUNRPC_DEBUG=y
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
# CONFIG_CIFS_UPCALL is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_SWN_UPCALL=y
# CONFIG_SMB_SERVER is not set
CONFIG_SMBFS=m
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=y
CONFIG_9P_FS_POSIX_ACL=y
# CONFIG_9P_FS_SECURITY is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=m
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_MAC_ROMAN=m
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
CONFIG_NLS_UCS2_UTILS=m
# CONFIG_DLM is not set
CONFIG_UNICODE=m
# CONFIG_UNICODE_NORMALIZATION_SELFTEST is not set
CONFIG_IO_WQ=y
# end of File systems
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_REQUEST_CACHE=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_TRUSTED_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
CONFIG_KEY_DH_OPERATIONS=y
CONFIG_KEY_NOTIFICATIONS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_PATH is not set
CONFIG_HARDENED_USERCOPY=y
CONFIG_FORTIFY_SOURCE=y
# CONFIG_STATIC_USERMODEHELPER is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_LOADPIN is not set
CONFIG_SECURITY_YAMA=y
# CONFIG_SECURITY_SAFESETID is not set
# CONFIG_SECURITY_LOCKDOWN_LSM is not set
# CONFIG_SECURITY_LANDLOCK is not set
# CONFIG_INTEGRITY is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf"
#
# Kernel hardening options
#
#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
# CONFIG_INIT_STACK_NONE is not set
CONFIG_INIT_STACK_ALL_PATTERN=y
# CONFIG_INIT_STACK_ALL_ZERO is not set
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
# CONFIG_INIT_MLOCKED_ON_FREE_DEFAULT_ON is not set
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
# CONFIG_ZERO_CALL_USED_REGS is not set
# end of Memory initialization
#
# Hardening of kernel data structures
#
CONFIG_LIST_HARDENED=y
CONFIG_BUG_ON_DATA_CORRUPTION=y
# end of Hardening of kernel data structures
CONFIG_RANDSTRUCT_NONE=y
# end of Kernel hardening options
# end of Security options
CONFIG_XOR_BLOCKS=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SIG=y
CONFIG_CRYPTO_SIG2=y
CONFIG_CRYPTO_SKCIPHER=m
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=m
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
# CONFIG_CRYPTO_MANAGER_EXTRA_TESTS is not set
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_NULL2=m
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_ENGINE=m
# end of Crypto core or helper
#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=m
CONFIG_CRYPTO_DH=y
# CONFIG_CRYPTO_DH_RFC7919_GROUPS is not set
CONFIG_CRYPTO_ECC=m
CONFIG_CRYPTO_ECDH=m
# CONFIG_CRYPTO_ECDSA is not set
# CONFIG_CRYPTO_ECRDSA is not set
# CONFIG_CRYPTO_SM2 is not set
# CONFIG_CRYPTO_CURVE25519 is not set
# end of Public-key cryptography
#
# Block ciphers
#
CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_AES_TI is not set
# CONFIG_CRYPTO_ARIA is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SM4_GENERIC is not set
# CONFIG_CRYPTO_TWOFISH is not set
# end of Block ciphers
#
# Length-preserving ciphers and modes
#
# CONFIG_CRYPTO_ADIANTUM is not set
# CONFIG_CRYPTO_CHACHA20 is not set
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_HCTR2 is not set
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=m
# end of Length-preserving ciphers and modes
#
# AEAD (authenticated encryption with associated data) ciphers
#
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_GENIV=m
CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_ECHAINIV=m
CONFIG_CRYPTO_ESSIV=m
# end of AEAD (authenticated encryption with associated data) ciphers
#
# Hashes, digests, and MACs
#
CONFIG_CRYPTO_BLAKE2B=y
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_SHA3=m
# CONFIG_CRYPTO_SM3_GENERIC is not set
# CONFIG_CRYPTO_STREEBOG is not set
# CONFIG_CRYPTO_VMAC is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_XXHASH=y
# end of Hashes, digests, and MACs
#
# CRCs (cyclic redundancy checks)
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRCT10DIF is not set
# end of CRCs (cyclic redundancy checks)
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
# CONFIG_CRYPTO_ZSTD is not set
# end of Compression
#
# Random number generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DRBG_MENU=m
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=m
CONFIG_CRYPTO_JITTERENTROPY=m
CONFIG_CRYPTO_JITTERENTROPY_MEMORY_BLOCKS=64
CONFIG_CRYPTO_JITTERENTROPY_MEMORY_BLOCKSIZE=32
CONFIG_CRYPTO_JITTERENTROPY_OSR=1
CONFIG_CRYPTO_KDF800108_CTR=y
# end of Random number generation
#
# Userspace interface
#
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_USER_API_RNG=m
# CONFIG_CRYPTO_USER_API_RNG_CAVP is not set
CONFIG_CRYPTO_USER_API_AEAD=m
# CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE is not set
# end of Userspace interface
CONFIG_CRYPTO_HASH_INFO=y
#
# Accelerated Cryptographic Algorithms for CPU (powerpc)
#
CONFIG_CRYPTO_MD5_PPC=m
CONFIG_CRYPTO_SHA1_PPC=m
# end of Accelerated Cryptographic Algorithms for CPU (powerpc)
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
# CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set
CONFIG_CRYPTO_DEV_VIRTIO=m
# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
# CONFIG_CRYPTO_DEV_CCREE is not set
# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_FIPS_SIGNATURE_SELFTEST is not set
#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
# end of Certificates for signature checking
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_RAID6_PQ_BENCHMARK=y
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
# CONFIG_CORDIC is not set
# CONFIG_PRIME_NUMBERS is not set
#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LIB_AES=m
CONFIG_CRYPTO_LIB_GF128MUL=m
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=m
CONFIG_CRYPTO_LIB_CHACHA=m
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=m
CONFIG_CRYPTO_LIB_CURVE25519=m
CONFIG_CRYPTO_LIB_DES=m
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=m
CONFIG_CRYPTO_LIB_POLY1305=m
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=m
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC64_ROCKSOFT is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC64 is not set
# CONFIG_CRC4 is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_ZSTD_COMMON=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
# CONFIG_XZ_DEC is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_ARCH_DMA_DEFAULT_COHERENT=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
# CONFIG_FORCE_NR_CPUS is not set
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_CLZ_TAB=y
# CONFIG_IRQ_POLL is not set
CONFIG_MPILIB=y
CONFIG_DIMLIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_FONT_SUN8x16=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_STACKDEPOT_MAX_FRAMES=64
CONFIG_SBITMAP=y
# CONFIG_LWQ_TEST is not set
# end of Library routines
CONFIG_GENERIC_IOREMAP=y
#
# Kernel hacking
#
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DYNAMIC_DEBUG_CORE is not set
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_MISC is not set
#
# Compile-time checks and compiler options
#
CONFIG_AS_HAS_NON_CONST_ULEB128=y
CONFIG_DEBUG_INFO_NONE=y
# CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_DWARF5 is not set
CONFIG_FRAME_WARN=1024
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
# CONFIG_HEADERS_INSTALL is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B is not set
# CONFIG_VMLINUX_MAP is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options
#
# Generic Kernel Debugging Instruments
#
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN=y
# CONFIG_UBSAN is not set
CONFIG_HAVE_ARCH_KCSAN=y
CONFIG_HAVE_KCSAN_COMPILER=y
# CONFIG_KCSAN is not set
# end of Generic Kernel Debugging Instruments
#
# Networking Debugging
#
# CONFIG_NET_DEV_REFCNT_TRACKER is not set
# CONFIG_NET_NS_REFCNT_TRACKER is not set
# CONFIG_DEBUG_NET is not set
# end of Networking Debugging
#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_DEBUG_PAGEALLOC=y
# CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT is not set
CONFIG_SLUB_DEBUG=y
# CONFIG_SLUB_DEBUG_ON is not set
CONFIG_PAGE_OWNER=y
CONFIG_PAGE_POISONING=y
CONFIG_DEBUG_RODATA_TEST=y
CONFIG_ARCH_HAS_DEBUG_WX=y
CONFIG_DEBUG_WX=y
CONFIG_GENERIC_PTDUMP=y
CONFIG_PTDUMP_CORE=y
# CONFIG_PTDUMP_DEBUGFS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SHRINKER_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_VM_PGTABLE=y
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_MEM_ALLOC_PROFILING is not set
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# CONFIG_KASAN is not set
CONFIG_HAVE_ARCH_KFENCE=y
# CONFIG_KFENCE is not set
# end of Memory Debugging
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_HAVE_HARDLOCKUP_DETECTOR_BUDDY=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_HARDLOCKUP_DETECTOR_PERF is not set
CONFIG_HARDLOCKUP_DETECTOR_BUDDY=y
# CONFIG_HARDLOCKUP_DETECTOR_ARCH is not set
CONFIG_HARDLOCKUP_DETECTOR_COUNTS_HRTIMER=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=60
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_WQ_WATCHDOG=y
# CONFIG_WQ_CPU_INTENSIVE_REPORT is not set
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs
#
# Scheduler Debugging
#
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHED_INFO=y
# CONFIG_SCHEDSTATS is not set
# end of Scheduler Debugging
# CONFIG_DEBUG_TIMEKEEPING is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
CONFIG_DEBUG_RWSEMS=y
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)
# CONFIG_DEBUG_IRQFLAGS is not set
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PLIST is not set
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_DEBUG_MAPLE_TREE=y
# end of Debug kernel data structures
#
# RCU Debugging
#
# CONFIG_RCU_SCALE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_REF_SCALE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
CONFIG_RCU_CPU_STALL_CPUTIME=y
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_OBJTOOL_MCOUNT=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
CONFIG_IO_STRICT_DEVMEM=y
#
# powerpc Debugging
#
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_PPC_EMULATED_STATS is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_JUMP_LABEL_FEATURE_CHECKS is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
# CONFIG_BDI_SWITCH is not set
CONFIG_BOOTX_TEXT=y
# CONFIG_PPC_EARLY_DEBUG is not set
# end of powerpc Debugging
#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
# CONFIG_RUNTIME_TESTING_MENU is not set
CONFIG_ARCH_USE_MEMTEST=y
# CONFIG_MEMTEST is not set
# end of Kernel Testing and Coverage
#
# Rust hacking
#
# end of Rust hacking
# end of Kernel hacking
[-- Attachment #4: dmesg_610-rc2_g4_1.5G_lowmem --]
[-- Type: application/octet-stream, Size: 45530 bytes --]
[ 0.000000] Total memory = 2048MB; using 4096kB for hash table
[ 0.000000] Activating Kernel Userspace Access Protection
[ 0.000000] Activating Kernel Userspace Execution Prevention
[ 0.000000] Linux version 6.10.0-rc2-PMacG4 (root@T1000) (gcc (Gentoo 13.2.1_p20240210 p14) 13.2.1 20240210, GNU ld (Gentoo 2.42 p3) 2.42.0) #12 SMP Thu Jun 6 15:41:35 CEST 2024
[ 0.000000] ioremap() called early from pmac_feature_init+0x254/0xa7c. Use early_ioremap() instead
[ 0.000000] Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0x24
[ 0.000000] Mapped at 0xff3bf000
[ 0.000000] ioremap() called early from probe_one_macio+0x150/0x238. Use early_ioremap() instead
[ 0.000000] Found a Keylargo mac-io controller, rev: 3, mapped at 0x(ptrval)
[ 0.000000] PowerMac motherboard: PowerMac G4 Windtunnel
[ 0.000000] ioremap() called early from btext_map+0x5c/0x7c. Use early_ioremap() instead
[ 0.000000] Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
[ 0.000000] printk: legacy bootconsole [udbg0] enabled
[ 0.000000] CPU maps initialized for 1 thread per core
[ 0.000000] (thread shift is 0)
[ 0.000000] -----------------------------------------------------
[ 0.000000] phys_mem_size = 0x80000000
[ 0.000000] dcache_bsize = 0x20
[ 0.000000] icache_bsize = 0x20
[ 0.000000] cpu_features = 0x000000002514600a
[ 0.000000] possible = 0x00000000277de00a
[ 0.000000] always = 0x0000000001000000
[ 0.000000] cpu_user_features = 0x9c000001 0x00000000
[ 0.000000] mmu_features = 0x00010201
[ 0.000000] Hash_size = 0x400000
[ 0.000000] Hash_mask = 0xffff
[ 0.000000] -----------------------------------------------------
[ 0.000000] ioremap() called early from pmac_setup_arch+0xd0/0x228. Use early_ioremap() instead
[ 0.000000] ioremap() called early from find_via_pmu+0x220/0x288. Use early_ioremap() instead
[ 0.000000] ioremap() called early from find_via_pmu+0xd4/0x288. Use early_ioremap() instead
[ 0.000000] via-pmu: Server Mode is disabled
[ 0.000000] PMU driver v2 initialized for Core99, firmware: 0c
[ 0.000000] ioremap() called early from pmac_nvram_init+0x284/0x518. Use early_ioremap() instead
[ 0.000000] nvram: Checking bank 0...
[ 0.000000] nvram: gen0=3427, gen1=3428
[ 0.000000] nvram: Active bank is: 1
[ 0.000000] nvram: OF partition at 0x410
[ 0.000000] nvram: XP partition at 0x1020
[ 0.000000] nvram: NR partition at 0x1120
[ 0.000000] Top of RAM: 0x80000000, Total RAM: 0x80000000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] Normal [mem 0x0000000040000000-0x000000005fffffff]
[ 0.000000] HighMem [mem 0x0000000060000000-0x000000007fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] percpu: Embedded 14 pages/cpu s28448 r8192 d20704 u57344
[ 0.000000] pcpu-alloc: s28448 r8192 d20704 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Kernel command line: ro root=/dev/sda5 slub_debug=FZP page_poison=1 netconsole=6666@192.168.2.8/eth0,6666@192.168.2.3/A8:A1:59:16:4F:EA debug
[ 0.000000] Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 524288
[ 0.000000] mem auto-init: stack:all(pattern), heap alloc:off, heap free:off, mlocked free:off
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xffbbf000..0xfffff000 : fixmap
[ 0.000000] * 0xff400000..0xff800000 : highmem PTEs
[ 0.000000] * 0xff115000..0xff400000 : early ioremap
[ 0.000000] * 0xf1000000..0xff115000 : vmalloc & ioremap
[ 0.000000] * 0x80000000..0x90000000 : modules
[ 0.000000] Memory: 2057588K/2097152K available (7772K kernel code, 520K rwdata, 4516K rodata, 1096K init, 278K bss, 39564K reserved, 0K cma-reserved, 524288K highmem)
[ 0.000000] **********************************************************
[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.000000] ** **
[ 0.000000] ** This system shows unhashed kernel memory addresses **
[ 0.000000] ** via the console, logs, and other interfaces. This **
[ 0.000000] ** might reduce the security of your system. **
[ 0.000000] ** **
[ 0.000000] ** If you see this message and you are not debugging **
[ 0.000000] ** the kernel, report this immediately to your system **
[ 0.000000] ** administrator! **
[ 0.000000] ** **
[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.000000] **********************************************************
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
[ 0.000000] mpic: Resetting
[ 0.000000] mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 2 CPUs
[ 0.000000] mpic: ISU size: 64, shift: 6, mask: 3f
[ 0.000000] mpic: Initializing for 64 sources
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] time_init: decrementer frequency = 41.658765 MHz
[ 0.000000] time_init: processor frequency = 1416.666661 MHz
[ 0.000006] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x99b97f1da, max_idle_ns: 440795202966 ns
[ 0.000556] clocksource: timebase mult[18012a56] shift[24] registered
[ 0.001052] clockevent: decrementer mult[aaa2619] shift[32] cpu[0]
[ 0.002097] Console: colour dummy device 80x25
[ 0.002561] printk: legacy console [tty0] enabled
[ 0.003020] printk: legacy bootconsole [udbg0] disabled
[ 0.003527] pid_max: default: 32768 minimum: 301
[ 0.006217] LSM: initializing lsm=capability,yama
[ 0.006256] Yama: becoming mindful.
[ 0.006984] Mount-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 0.007058] Mountpoint-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
[ 0.012546] PowerMac SMP probe found 2 cpus
[ 0.012855] KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
[ 0.012907] channel 0 bus <multibus>
[ 0.012928] channel 1 bus <multibus>
[ 0.013030] KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
[ 0.013074] channel 0 bus <multibus>
[ 0.013129] PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c
[ 0.013166] channel 1 bus <multibus>
[ 0.013186] channel 2 bus <multibus>
[ 0.013211] pmf: no parser for command 17 !
[ 0.013275] Processor timebase sync using GPIO 0x73
[ 0.013289] mpic: requesting IPIs...
[ 0.013391] CPU0: L2CR is 80000000
[ 0.013404] CPU0: L3CR is 9c030000
[ 0.015052] MPC7450 family performance monitor hardware support registered
[ 0.015259] rcu: Hierarchical SRCU implementation.
[ 0.015282] rcu: Max phase no-delay instances is 1000.
[ 0.016169] smp: Bringing up secondary CPUs ...
[83973668.808078] CPU1: L2CR was 0
[83973668.808135] CPU1: L2CR set to 80000000
[83973668.808141] CPU1: L3CR was 0
[83973668.808288] CPU1: L3CR set to 9c030000
[ 0.019437] smp: Brought up 1 node, 2 CPUs
[ 0.021778] devtmpfs: initialized
[ 0.022675] Duplicate name in PowerPC,G4@0, renamed to "l2-cache#1"
[ 0.022803] Duplicate name in l2-cache#1, renamed to "l2-cache#1"
[ 0.023311] Duplicate name in PowerPC,G4@1, renamed to "l2-cache#1"
[ 0.023432] Duplicate name in l2-cache#1, renamed to "l2-cache#1"
[ 0.029065] Duplicate name in gpio@50, renamed to "gpio5@6f#1"
[ 0.029170] Duplicate name in gpio@50, renamed to "gpio6@70#1"
[ 0.029377] Duplicate name in gpio@50, renamed to "gpio11@75#1"
[ 0.029504] Duplicate name in gpio@50, renamed to "extint-gpio15@67#1"
[ 0.036283] Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0
[ 0.036328] PCI host bridge /pci@f0000000 ranges:
[ 0.036367] MEM 0x00000000f1000000..0x00000000f1ffffff -> 0x00000000f1000000
[ 0.036397] IO 0x00000000f0000000..0x00000000f07fffff -> 0x0000000000000000
[ 0.036535] MEM 0x0000000090000000..0x00000000afffffff -> 0x0000000090000000
[ 0.036592] Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0
[ 0.036615] PCI host bridge /pci@f2000000 (primary) ranges:
[ 0.036646] MEM 0x00000000f3000000..0x00000000f3ffffff -> 0x00000000f3000000
[ 0.036675] IO 0x00000000f2000000..0x00000000f27fffff -> 0x0000000000000000
[ 0.036796] MEM 0x0000000080000000..0x000000008fffffff -> 0x0000000080000000
[ 0.036858] Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0
[ 0.036881] PCI host bridge /pci@f4000000 ranges:
[ 0.036912] MEM 0x00000000f5000000..0x00000000f5ffffff -> 0x00000000f5000000
[ 0.036937] IO 0x00000000f4000000..0x00000000f47fffff -> 0x0000000000000000
[ 0.037144] Found NEC PD720100A USB2 chip with disabled EHCI, fixing up...
[ 0.037502] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.037598] futex hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.040909] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.046566] PCI: Probing PCI hardware
[ 0.047178] PCI host bridge to bus 0000:00
[ 0.047210] pci_bus 0000:00: root bus resource [io 0xff780000-0xfff7ffff] (bus address [0x0000-0x7fffff])
[ 0.047240] pci_bus 0000:00: root bus resource [mem 0xf1000000-0xf1ffffff]
[ 0.047261] pci_bus 0000:00: root bus resource [mem 0x90000000-0xafffffff]
[ 0.047285] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.047306] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.047800] pci 0000:00:0b.0: [106b:0034] type 00 class 0x060000 conventional PCI endpoint
[ 0.048465] pci 0000:00:10.0: [1002:4150] type 00 class 0x030000 conventional PCI endpoint
[ 0.048513] pci 0000:00:10.0: BAR 0 [mem 0xa0000000-0xafffffff pref]
[ 0.048539] pci 0000:00:10.0: BAR 1 [io 0xff780400-0xff7804ff]
[ 0.048563] pci 0000:00:10.0: BAR 2 [mem 0x90000000-0x9000ffff]
[ 0.048603] pci 0000:00:10.0: ROM [mem 0x90020000-0x9003ffff pref]
[ 0.048659] pci 0000:00:10.0: supports D1 D2
[ 0.049537] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.050654] OF: /pci@f2000000/mac-io@17/gpio@50/gpio5@6f: could not find phandle 1751474532
[ 0.050732] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio15@67: could not find phandle 1751474532
[ 0.050812] OF: /pci@f2000000/mac-io@17/gpio@50/gpio6@70: could not find phandle 1634562093
[ 0.050884] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio16@68: could not find phandle 1936745825
[ 0.050966] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio14@66: could not find phandle 1818848869
[ 0.051045] OF: /pci@f2000000/mac-io@17/gpio@50/gpio12@76: could not find phandle 1835103092
[ 0.051114] OF: /pci@f2000000/mac-io@17/gpio@50/gpio11@75: could not find phandle 1635083369
[ 0.051178] OF: /pci@f2000000/mac-io@17/gpio@50/gpio5@6f: could not find phandle 1751474532
[ 0.051242] OF: /pci@f2000000/mac-io@17/gpio@50/gpio6@70: could not find phandle 1634562093
[ 0.051306] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio4@5c: could not find phandle 1818848869
[ 0.051384] OF: /pci@f2000000/mac-io@17/gpio@50/gpio11@75: could not find phandle 1635083369
[ 0.051449] OF: /pci@f2000000/mac-io@17/gpio@50/extint-gpio15@67: could not find phandle 1751474532
[ 0.052840] pci_bus 0001:00: Fixed dependency cycle(s) with /pci@f2000000/mac-io@17/interrupt-controller@40000
[ 0.052957] PCI host bridge to bus 0001:00
[ 0.052976] pci_bus 0001:00: root bus resource [io 0x0000-0x7fffff]
[ 0.052998] pci_bus 0001:00: root bus resource [mem 0xf3000000-0xf3ffffff]
[ 0.053019] pci_bus 0001:00: root bus resource [mem 0x80000000-0x8fffffff]
[ 0.053042] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.053062] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.053526] pci 0001:00:0b.0: [106b:0035] type 00 class 0x060000 conventional PCI endpoint
[ 0.054112] pci 0001:00:12.0: [1033:0035] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.054157] pci 0001:00:12.0: BAR 0 [mem 0x8008c000-0x8008cfff]
[ 0.054237] pci 0001:00:12.0: supports D1 D2
[ 0.054254] pci 0001:00:12.0: PME# supported from D0 D1 D2 D3hot
[ 0.054714] pci 0001:00:12.1: [1033:0035] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.054757] pci 0001:00:12.1: BAR 0 [mem 0x8008b000-0x8008bfff]
[ 0.054837] pci 0001:00:12.1: supports D1 D2
[ 0.054853] pci 0001:00:12.1: PME# supported from D0 D1 D2 D3hot
[ 0.055175] pci 0001:00:12.2: [1033:00e0] type 00 class 0x0c0320 conventional PCI endpoint
[ 0.055216] pci 0001:00:12.2: BAR 0 [mem 0x80081000-0x800810ff]
[ 0.055293] pci 0001:00:12.2: supports D1 D2
[ 0.055309] pci 0001:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.055659] pci 0001:00:13.0: [1095:3112] type 00 class 0x018000 conventional PCI endpoint
[ 0.055701] pci 0001:00:13.0: BAR 0 [io 0x0460-0x0467]
[ 0.055724] pci 0001:00:13.0: BAR 1 [io 0x0450-0x0453]
[ 0.055745] pci 0001:00:13.0: BAR 2 [io 0x0440-0x0447]
[ 0.055767] pci 0001:00:13.0: BAR 3 [io 0x0430-0x0433]
[ 0.055789] pci 0001:00:13.0: BAR 4 [io 0x0420-0x042f]
[ 0.055811] pci 0001:00:13.0: BAR 5 [mem 0x80082000-0x800821ff]
[ 0.055834] pci 0001:00:13.0: ROM [mem 0x80100000-0x8017ffff pref]
[ 0.055884] pci 0001:00:13.0: supports D1 D2
[ 0.056262] pci 0001:00:15.0: [9710:9865] type 00 class 0x070002 conventional PCI endpoint
[ 0.056306] pci 0001:00:15.0: BAR 0 [io 0x0410-0x0417]
[ 0.056329] pci 0001:00:15.0: BAR 1 [mem 0x8008a000-0x8008afff]
[ 0.056362] pci 0001:00:15.0: BAR 4 [mem 0x80089000-0x80089fff]
[ 0.056424] pci 0001:00:15.0: supports D1 D2
[ 0.056440] pci 0001:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.056770] pci 0001:00:15.1: [9710:9865] type 00 class 0x070002 conventional PCI endpoint
[ 0.056812] pci 0001:00:15.1: BAR 0 [io 0x0400-0x0407]
[ 0.056835] pci 0001:00:15.1: BAR 1 [mem 0x80088000-0x80088fff]
[ 0.056868] pci 0001:00:15.1: BAR 4 [mem 0x80087000-0x80087fff]
[ 0.056928] pci 0001:00:15.1: supports D1 D2
[ 0.056944] pci 0001:00:15.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.057395] pci 0001:00:15.2: [ffff:9865] type 00 class 0x070103 conventional PCI endpoint
[ 0.057437] pci 0001:00:15.2: BAR 0 [io 0x0000-0x0007]
[ 0.057460] pci 0001:00:15.2: BAR 1 [io 0x0000-0x0007]
[ 0.057482] pci 0001:00:15.2: BAR 2 [mem 0x00000000-0x00000fff]
[ 0.057510] pci 0001:00:15.2: BAR 4 [mem 0x00000000-0x00000fff]
[ 0.057571] pci 0001:00:15.2: supports D1 D2
[ 0.057587] pci 0001:00:15.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.057899] pci 0001:00:16.0: [14e4:4320] type 00 class 0x028000 conventional PCI endpoint
[ 0.057940] pci 0001:00:16.0: BAR 0 [mem 0x8008e000-0x8008ffff]
[ 0.058016] pci 0001:00:16.0: supports D1 D2
[ 0.058032] pci 0001:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.058336] pci 0001:00:17.0: [106b:0022] type 00 class 0xff0000 conventional PCI endpoint
[ 0.058377] pci 0001:00:17.0: BAR 0 [mem 0x80000000-0x8007ffff]
[ 0.058845] pci 0001:00:18.0: [106b:0019] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.058909] pci 0001:00:18.0: BAR 0 [mem 0x80086000-0x80086fff]
[ 0.059250] pci 0001:00:19.0: [106b:0019] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.059292] pci 0001:00:19.0: BAR 0 [mem 0x80085000-0x80085fff]
[ 0.059811] pci 0001:00:1b.0: [1033:0035] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.059856] pci 0001:00:1b.0: BAR 0 [mem 0x80084000-0x80084fff]
[ 0.059936] pci 0001:00:1b.0: supports D1 D2
[ 0.059952] pci 0001:00:1b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.060293] pci 0001:00:1b.1: [1033:0035] type 00 class 0x0c0310 conventional PCI endpoint
[ 0.060335] pci 0001:00:1b.1: BAR 0 [mem 0x80083000-0x80083fff]
[ 0.060412] pci 0001:00:1b.1: supports D1 D2
[ 0.060429] pci 0001:00:1b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.060756] pci 0001:00:1b.2: [1033:00e0] type 00 class 0x0c0320 conventional PCI endpoint
[ 0.060798] pci 0001:00:1b.2: BAR 0 [mem 0x80080000-0x800800ff]
[ 0.060875] pci 0001:00:1b.2: supports D1 D2
[ 0.060891] pci 0001:00:1b.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.061315] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.063043] PCI host bridge to bus 0002:00
[ 0.063076] pci_bus 0002:00: root bus resource [io 0x880000-0x107ffff] (bus address [0x0000-0x7fffff])
[ 0.063104] pci_bus 0002:00: root bus resource [mem 0xf5000000-0xf5ffffff]
[ 0.063127] pci_bus 0002:00: root bus resource [bus 00-ff]
[ 0.063146] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to ff
[ 0.063612] pci 0002:00:0b.0: [106b:0036] type 00 class 0x060000 conventional PCI endpoint
[ 0.064101] pci 0002:00:0d.0: [106b:0033] type 00 class 0xff0000 conventional PCI endpoint
[ 0.064144] pci 0002:00:0d.0: BAR 0 [mem 0xf5004000-0xf5007fff]
[ 0.064626] pci 0002:00:0e.0: [106b:0031] type 00 class 0x0c0010 conventional PCI endpoint
[ 0.064668] pci 0002:00:0e.0: BAR 0 [mem 0xf5000000-0xf5000fff]
[ 0.064739] pci 0002:00:0e.0: supports D1 D2
[ 0.064756] pci 0002:00:0e.0: PME# supported from D0 D1 D2 D3hot
[ 0.065102] pci 0002:00:0f.0: [106b:0032] type 00 class 0x020000 conventional PCI endpoint
[ 0.065143] pci 0002:00:0f.0: BAR 0 [mem 0xf5200000-0xf53fffff]
[ 0.065193] pci 0002:00:0f.0: ROM [mem 0xf5100000-0xf51fffff pref]
[ 0.066067] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to 00
[ 0.066523] PCI 0000:00 Cannot reserve Legacy IO [io 0xff780000-0xff780fff]
[ 0.066560] PCI 0001:00 Cannot reserve Legacy IO [io 0x0000-0x0fff]
[ 0.066594] pci_bus 0000:00: resource 4 [io 0xff780000-0xfff7ffff]
[ 0.066614] pci_bus 0000:00: resource 5 [mem 0xf1000000-0xf1ffffff]
[ 0.066633] pci_bus 0000:00: resource 6 [mem 0x90000000-0xafffffff]
[ 0.066671] pci 0001:00:15.2: BAR 2 [mem 0xf3000000-0xf3000fff]: assigned
[ 0.066696] pci 0001:00:15.2: BAR 4 [mem 0xf3001000-0xf3001fff]: assigned
[ 0.066719] pci 0001:00:15.2: BAR 0 [io 0x1000-0x1007]: assigned
[ 0.066740] pci 0001:00:15.2: BAR 1 [io 0x1008-0x100f]: assigned
[ 0.066775] pci_bus 0001:00: resource 4 [io 0x0000-0x7fffff]
[ 0.066794] pci_bus 0001:00: resource 5 [mem 0xf3000000-0xf3ffffff]
[ 0.066812] pci_bus 0001:00: resource 6 [mem 0x80000000-0x8fffffff]
[ 0.066833] pci_bus 0002:00: resource 4 [io 0x880000-0x107ffff]
[ 0.066852] pci_bus 0002:00: resource 5 [mem 0xf5000000-0xf5ffffff]
[ 0.129126] raid6: altivecx8 gen() 3303 MB/s
[ 0.185878] raid6: altivecx4 gen() 3396 MB/s
[ 0.242638] raid6: altivecx2 gen() 3176 MB/s
[ 0.299395] raid6: altivecx1 gen() 2594 MB/s
[ 0.356188] raid6: int32x8 gen() 358 MB/s
[ 0.412944] raid6: int32x4 gen() 441 MB/s
[ 0.469658] raid6: int32x2 gen() 794 MB/s
[ 0.526437] raid6: int32x1 gen() 551 MB/s
[ 0.526453] raid6: using algorithm altivecx4 gen() 3396 MB/s
[ 0.526469] raid6: using intx1 recovery algorithm
[ 0.528735] SCSI subsystem initialized
[ 0.529247] libata version 3.00 loaded.
[ 0.529513] usbcore: registered new interface driver usbfs
[ 0.529678] usbcore: registered new interface driver hub
[ 0.529810] usbcore: registered new device driver usb
[ 0.532479] pci 0000:00:10.0: vgaarb: setting as boot VGA device
[ 0.532517] pci 0000:00:10.0: vgaarb: bridge control possible
[ 0.532534] pci 0000:00:10.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
[ 0.532585] vgaarb: loaded
[ 0.532884] clocksource: Switched to clocksource timebase
[ 0.555333] NET: Registered PF_INET protocol family
[ 0.556575] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.560784] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 20480 bytes, linear)
[ 0.561665] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.562427] TCP established hash table entries: 16384 (order: 4, 65536 bytes, linear)
[ 0.566062] TCP bind hash table entries: 16384 (order: 7, 655360 bytes, linear)
[ 0.567389] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.568102] UDP hash table entries: 1024 (order: 3, 49152 bytes, linear)
[ 0.568344] UDP-Lite hash table entries: 1024 (order: 3, 49152 bytes, linear)
[ 0.569049] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.569370] pci 0001:00:12.0: enabling device (0000 -> 0002)
[ 0.569463] pci 0001:00:12.1: enabling device (0000 -> 0002)
[ 0.569513] pci 0001:00:12.2: enabling device (0004 -> 0006)
[ 0.569640] Apple USB OHCI 0001:00:18.0 disabled by firmware
[ 0.569660] pci 0001:00:18.0: Can't enable PCI device, BIOS handoff failed.
[ 0.569685] Apple USB OHCI 0001:00:19.0 disabled by firmware
[ 0.569700] pci 0001:00:19.0: Can't enable PCI device, BIOS handoff failed.
[ 0.569729] pci 0001:00:1b.0: enabling device (0000 -> 0002)
[ 0.569777] pci 0001:00:1b.1: enabling device (0000 -> 0002)
[ 0.569824] pci 0001:00:1b.2: enabling device (0004 -> 0006)
[ 0.569887] pci 0002:00:0f.0: CLS mismatch (32 != 1020), using 32 bytes
[ 0.570257] Thermal assist unit not available
[ 0.572535] Initialise system trusted keyrings
[ 0.573611] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 0.585101] 9p: Installing v9fs 9p2000 file system support
[ 0.585827] NET: Registered PF_ALG protocol family
[ 0.585908] xor: measuring software checksum speed
[ 0.594512] 8regs : 1150 MB/sec
[ 0.604194] 8regs_prefetch : 1018 MB/sec
[ 0.612290] 32regs : 1219 MB/sec
[ 0.621530] 32regs_prefetch : 1066 MB/sec
[ 0.623654] altivec : 4710 MB/sec
[ 0.623671] xor: using function: altivec (4710 MB/sec)
[ 0.623699] Key type asymmetric registered
[ 0.623714] Asymmetric key parser 'x509' registered
[ 0.629496] bounce: pool size: 64 pages
[ 0.629958] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.630232] io scheduler bfq registered
[ 0.635092] Using unsupported 1920x1080 (null) at a0008000, depth=8, pitch=2048
[ 0.676507] Console: switching to colour frame buffer device 240x67
[ 0.716707] fb0: Open Firmware frame buffer device on /pci@f0000000/ATY,AlteracParent@10/ATY,Alterac_A@0
[ 0.717601] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.720855] serial 0001:00:15.0: enabling device (0004 -> 0007)
[ 0.722018] 0001:00:15.0: ttyS0 at I/O 0x410 (irq = 58, base_baud = 115200) is a 16550A
[ 0.722721] serial 0001:00:15.1: enabling device (0004 -> 0007)
[ 0.723853] 0001:00:15.1: ttyS1 at I/O 0x400 (irq = 58, base_baud = 115200) is a 16550A
[ 0.726048] MacIO PCI driver attached to Keylargo chipset
[ 0.732562] sata_sil 0001:00:13.0: version 2.4
[ 0.732851] sata_sil 0001:00:13.0: enabling device (0004 -> 0007)
[ 0.735464] scsi host0: sata_sil
[ 0.737015] scsi host1: sata_sil
[ 0.737466] ata1: SATA max UDMA/100 mmio m512@0x80082000 tf 0x80082080 irq 53 lpm-pol 0
[ 0.737718] ata2: SATA max UDMA/100 mmio m512@0x80082000 tf 0x800820c0 irq 53 lpm-pol 0
[ 0.738362] pata-pci-macio 0002:00:0d.0: enabling device (0004 -> 0006)
[ 0.752894] pata-pci-macio 0002:00:0d.0: Activating pata-macio chipset UniNorth ATA-6, Apple bus ID 3
[ 0.754902] scsi host2: pata_macio
[ 0.755404] ata3: PATA max UDMA/100 irq 39 lpm-pol 0
[ 1.049256] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1.050203] ata1.00: ATA-9: SanDisk SSD PLUS 240GB, UF4500RL, max UDMA/133
[ 1.050427] ata1.00: 468877312 sectors, multi 1: LBA48 NCQ (depth 0/32)
[ 1.051929] ata1.00: Features: Dev-Sleep
[ 1.076367] ata1.00: configured for UDMA/100
[ 1.077278] scsi 0:0:0:0: Direct-Access ATA SanDisk SSD PLUS 00RL PQ: 0 ANSI: 5
[ 1.079503] sd 0:0:0:0: [sda] 468877312 512-byte logical blocks: (240 GB/224 GiB)
[ 1.079881] sd 0:0:0:0: [sda] Write Protect is off
[ 1.080046] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.080288] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.080727] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[ 1.084201] sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8
[ 1.086587] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.502907] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1.505465] ata2.00: ATA-9: WDC WD5000LPLX-60ZNTT1, 02.01A02, max UDMA/133
[ 1.505687] ata2.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 1.508375] ata2.00: configured for UDMA/100
[ 1.509165] scsi 1:0:0:0: Direct-Access ATA WDC WD5000LPLX-6 1A02 PQ: 0 ANSI: 5
[ 1.511926] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.512184] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1.512413] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.512573] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.512808] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.513264] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
[ 1.792912] pata-macio 0.0001f000:ata-4: Activating pata-macio chipset KeyLargo ATA-4, Apple bus ID 2
[ 1.803801] scsi host3: pata_macio
[ 1.813358] ata4: PATA max UDMA/66 irq 19 lpm-pol 0
[ 1.978834] ata4.00: CFA: DeLOCK 54143 512MB, 100511E, max UDMA/66
[ 1.988243] ata4.00: 1009008 sectors, multi 1: LBA
[ 2.221803] sdb: [mac] sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8
[ 2.233459] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.243370] scsi 3:0:0:0: Direct-Access ATA DeLOCK 54143 512 11E PQ: 0 ANSI: 5
[ 2.254825] sd 3:0:0:0: [sdc] 1009008 512-byte logical blocks: (517 MB/493 MiB)
[ 2.264279] sd 3:0:0:0: [sdc] Write Protect is off
[ 2.273560] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.282919] sd 3:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 2.292556] sd 3:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
[ 2.304970] sdc: [mac] sdc1 sdc2 sdc3 sdc4 sdc5 sdc6
[ 2.316347] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 2.859560] pata-macio 0.00020000:ata-3: Activating pata-macio chipset KeyLargo ATA-3, Apple bus ID 0
[ 2.871235] scsi host4: pata_macio
[ 2.881564] ata5: PATA max MWDMA2 irq 20 lpm-pol 0
[ 2.891832] sungem.c:v1.0 David S. Miller <davem@redhat.com>
[ 2.903311] gem 0002:00:0f.0 eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0a:95:9c:76:3a
[ 2.914884] ehci-pci 0001:00:12.2: EHCI Host Controller
[ 2.919715] rtc-generic rtc-generic: registered as rtc0
[ 2.925047] ehci-pci 0001:00:12.2: new USB bus registered, assigned bus number 1
[ 2.935464] PowerMac i2c bus pmu 2 registered
[ 2.945486] ehci-pci 0001:00:12.2: irq 52, io mem 0x80081000
[ 2.955671] PowerMac i2c bus pmu 1 registered
[ 2.975968] PowerMac i2c bus mac-io 0 registered
[ 2.985843] i2c i2c-2: No i2c address for /pci@f2000000/mac-io@17/i2c@18000/i2c-modem
[ 2.986223] ehci-pci 0001:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.995919] PowerMac i2c bus uni-n 1 registered
[ 3.005961] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10
[ 3.015271] i2c i2c-3: i2c-powermac: modalias failure on /uni-n@f8000000/i2c@f8001000/cereal@1c0
[ 3.025144] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.035347] PowerMac i2c bus uni-n 0 registered
[ 3.044989] usb usb1: Product: EHCI Host Controller
[ 3.044999] usb usb1: Manufacturer: Linux 6.10.0-rc2-PMacG4 ehci_hcd
[ 3.055973] hid: raw HID events driver (C) Jiri Kosina
[ 3.064927] usb usb1: SerialNumber: 0001:00:12.2
[ 3.066045] hub 1-0:1.0: USB hub found
[ 3.075740] usbcore: registered new interface driver usbhid
[ 3.085193] hub 1-0:1.0: 5 ports detected
[ 3.095272] usbhid: USB HID core driver
[ 3.116276] ehci-pci 0001:00:1b.2: EHCI Host Controller
[ 3.125427] ata5.00: ATAPI: _NEC DVD_RW ND-3520A, 1.04, max UDMA/33
[ 3.135379] ehci-pci 0001:00:1b.2: new USB bus registered, assigned bus number 2
[ 3.146355] NET: Registered PF_INET6 protocol family
[ 3.155086] ehci-pci 0001:00:1b.2: irq 63, io mem 0x80080000
[ 3.169107] Segment Routing with IPv6
[ 3.176484] scsi 4:0:0:0: CD-ROM _NEC DVD_RW ND-3520A 1.04 PQ: 0 ANSI: 5
[ 3.185115] In-situ OAM (IOAM) with IPv6
[ 3.195066] ehci-pci 0001:00:1b.2: USB 2.0 started, EHCI 1.00
[ 3.216382] 9pnet: Installing 9P2000 support
[ 3.225491] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10
[ 3.235490] drmem: No dynamic reconfiguration memory found
[ 3.245209] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.265553] usb usb2: Product: EHCI Host Controller
[ 3.272498] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 3.275570] usb usb2: Manufacturer: Linux 6.10.0-rc2-PMacG4 ehci_hcd
[ 3.296186] usb usb2: SerialNumber: 0001:00:1b.2
[ 3.306504] registered taskstats version 1
[ 3.307320] hub 2-0:1.0: USB hub found
[ 3.317638] Loading compiled-in X.509 certificates
[ 3.326837] hub 2-0:1.0: 5 ports detected
[ 3.348003] sr 4:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 3.358407] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.392548] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 3.462911] zswap: loaded using pool lzo/zsmalloc
[ 3.473312] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers
[ 3.483776] page_owner is disabled
[ 3.515865] Btrfs loaded, zoned=no, fsverity=no
[ 4.290700] input: PMU as /devices/virtual/input/input0
[ 4.301377] netpoll: netconsole: local port 6666
[ 4.311392] netpoll: netconsole: local IPv4 address 192.168.2.8
[ 4.321353] netpoll: netconsole: interface 'eth0'
[ 4.331223] netpoll: netconsole: remote port 6666
[ 4.340951] netpoll: netconsole: remote IPv4 address 192.168.2.3
[ 4.350663] netpoll: netconsole: remote ethernet address a8:a1:59:16:4f:ea
[ 4.360434] netpoll: netconsole: device eth0 not up yet, forcing it
[ 4.446631] sungem_phy: PHY ID: 2060e1, addr: 0
[ 4.456535] gem 0002:00:0f.0 eth0: Found BCM5421 PHY
[ 8.139895] gem 0002:00:0f.0 eth0: Link is up at 1000 Mbps, full-duplex
[ 8.149804] gem 0002:00:0f.0 eth0: Pause is enabled (rxfifo: 10240 off: 7168 on: 5632)
[ 8.160666] printk: legacy console [netcon0] enabled
[ 8.177717] netconsole: network logging started
[ 8.203524] EXT4-fs (sda5): mounted filesystem fa07e66f-b4f9-404f-85d8-487d3c097aec ro with ordered data mode. Quota mode: disabled.
[ 8.213656] VFS: Mounted root (ext4 filesystem) readonly on device 8:5.
[ 8.227278] devtmpfs: mounted
[ 8.239234] Freeing unused kernel image (initmem) memory: 1096K
[ 8.269258] Checked W+X mappings: passed, no W+X pages found
[ 8.279004] rodata_test: all tests were successful
[ 8.288633] Run /sbin/init as init process
[ 8.298183] with arguments:
[ 8.307647] /sbin/init
[ 8.317090] with environment:
[ 8.326395] HOME=/
[ 8.335559] TERM=linux
[ 12.552347] ohci-pci 0001:00:12.0: OHCI PCI host controller
[ 12.639903] ohci-pci 0001:00:12.0: new USB bus registered, assigned bus number 3
[ 12.695835] ohci-pci 0001:00:12.0: irq 52, io mem 0x8008c000
[ 12.880101] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[ 12.888243] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.896221] usb usb3: Product: OHCI PCI host controller
[ 12.904020] usb usb3: Manufacturer: Linux 6.10.0-rc2-PMacG4 ohci_hcd
[ 12.911848] usb usb3: SerialNumber: 0001:00:12.0
[ 12.982280] hub 3-0:1.0: USB hub found
[ 13.032670] [drm] radeon kernel modesetting enabled.
[ 13.042336] hub 3-0:1.0: 3 ports detected
[ 13.053574] Console: switching to colour dummy device 80x25
[ 13.061278] radeon 0000:00:10.0: enabling device (0006 -> 0007)
[ 13.066664] [drm] initializing kernel modesetting (RV350 0x1002:0x4150 0x1002:0x0002 0x00).
[ 13.066746] [drm] Forcing AGP to PCI mode
[ 13.066910] radeon 0000:00:10.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0x0000
[ 13.113051] ohci-pci 0001:00:12.1: OHCI PCI host controller
[ 13.113269] ohci-pci 0001:00:12.1: new USB bus registered, assigned bus number 4
[ 13.113784] ohci-pci 0001:00:12.1: irq 52, io mem 0x8008b000
[ 13.124889] [drm] Generation 2 PCI interface, using max accessible memory
[ 13.124992] radeon 0000:00:10.0: VRAM: 256M 0x00000000A0000000 - 0x00000000AFFFFFFF (256M used)
[ 13.125034] radeon 0000:00:10.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF
[ 13.125140] [drm] Detected VRAM RAM=256M, BAR=256M
[ 13.125172] [drm] RAM width 128bits DDR
[ 13.137194] [drm] radeon: 256M of VRAM memory ready
[ 13.137304] [drm] radeon: 512M of GTT memory ready.
[ 13.137431] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 13.158832] [drm] radeon: 1 quad pipes, 1 Z pipes initialized
[ 13.158935] [drm] PCI GART of 512M enabled (table at 0x0000000042300000).
[ 13.159084] radeon 0000:00:10.0: WB enabled
[ 13.159127] radeon 0000:00:10.0: fence driver on ring 0 use gpu addr 0x0000000080000000
[ 13.163415] [drm] radeon: irq initialized.
[ 13.163535] [drm] Loading R300 Microcode
[ 13.200398] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[ 13.200524] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.200564] usb usb4: Product: OHCI PCI host controller
[ 13.200619] usb usb4: Manufacturer: Linux 6.10.0-rc2-PMacG4 ohci_hcd
[ 13.200669] usb usb4: SerialNumber: 0001:00:12.1
[ 13.214112] hub 4-0:1.0: USB hub found
[ 13.214947] hub 4-0:1.0: 2 ports detected
[ 13.250425] Apple USB OHCI 0001:00:18.0 disabled by firmware
[ 13.251044] Apple USB OHCI 0001:00:19.0 disabled by firmware
[ 13.251265] ohci-pci 0001:00:1b.0: OHCI PCI host controller
[ 13.251333] ohci-pci 0001:00:1b.0: new USB bus registered, assigned bus number 5
[ 13.251648] ohci-pci 0001:00:1b.0: irq 63, io mem 0x80084000
[ 13.267909] [drm] radeon: ring at 0x0000000080001000
[ 13.268058] [drm] ring test succeeded in 1 usecs
[ 13.276909] [drm] ib test succeeded in 0 usecs
[ 13.277012] stackdepot: allocating hash table of 131072 entries via kvcalloc
[ 13.298680] [drm] Radeon Display Connectors
[ 13.298762] [drm] Connector 0:
[ 13.298787] [drm] DVI-I-1
[ 13.298814] [drm] HPD2
[ 13.298873] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 13.298916] [drm] Encoders:
[ 13.298949] [drm] CRT1: INTERNAL_DAC1
[ 13.298976] [drm] DFP2: INTERNAL_DVO1
[ 13.299002] [drm] Connector 1:
[ 13.299037] [drm] DVI-I-2
[ 13.299071] [drm] HPD1
[ 13.299095] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 13.299127] [drm] Encoders:
[ 13.299150] [drm] CRT2: INTERNAL_DAC2
[ 13.299186] [drm] DFP1: INTERNAL_TMDS1
[ 13.299459] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:10.0 on minor 0
[ 13.359976] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[ 13.360069] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.360140] usb usb5: Product: OHCI PCI host controller
[ 13.360181] usb usb5: Manufacturer: Linux 6.10.0-rc2-PMacG4 ohci_hcd
[ 13.360221] usb usb5: SerialNumber: 0001:00:1b.0
[ 13.366568] hub 5-0:1.0: USB hub found
[ 13.369166] hub 5-0:1.0: 3 ports detected
[ 13.371738] ohci-pci 0001:00:1b.1: OHCI PCI host controller
[ 13.371846] ohci-pci 0001:00:1b.1: new USB bus registered, assigned bus number 6
[ 13.372037] ohci-pci 0001:00:1b.1: irq 63, io mem 0x80083000
[ 13.470419] [drm] fb mappable at 0xA0040000
[ 13.470512] [drm] vram apper at 0xA0000000
[ 13.470572] [drm] size 8294400
[ 13.470606] [drm] fb depth is 24
[ 13.470640] [drm] pitch is 7680
[ 13.523377] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10
[ 13.523474] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 13.523545] usb usb6: Product: OHCI PCI host controller
[ 13.523588] usb usb6: Manufacturer: Linux 6.10.0-rc2-PMacG4 ohci_hcd
[ 13.523618] usb usb6: SerialNumber: 0001:00:1b.1
[ 13.524769] hub 6-0:1.0: USB hub found
[ 13.524909] hub 6-0:1.0: 2 ports detected
[ 13.681269] Console: switching to colour frame buffer device 240x67
[ 13.701563] gem 0002:00:0f.0 enP2p0s15: renamed from eth0 (while UP)
[ 13.736095] radeon 0000:00:10.0: [drm] fb0: radeondrmfb frame buffer device
[ 13.969909] ADM1030 fan controller [@2c]
[ 13.979831] DS1775 digital thermometer [@49]
[ 13.980060] Temp: 58.7 C
[ 13.980095] Hyst: 70.0 C
[ 13.980211] OS: 75.0 C
[ 13.980345]
[ 15.076683] EXT4-fs (sda5): re-mounted fa07e66f-b4f9-404f-85d8-487d3c097aec r/w. Quota mode: disabled.
[ 15.163073] EXT4-fs (sda5): re-mounted fa07e66f-b4f9-404f-85d8-487d3c097aec r/w. Quota mode: disabled.
[ 15.651251] Adding 8388604k swap on /dev/sdb6. Priority:-2 extents:1 across:8388604k
[ 15.872740] random: crng init done
[ 15.873152] EXT4-fs (sdc5): mounting ext2 file system using the ext4 subsystem
[ 15.882066] EXT4-fs (sdc5): mounted filesystem e4e8af9e-0f0d-44f9-b983-71bf61d782de r/w without journal. Quota mode: disabled.
[ 15.882727] ext2 filesystem being mounted at /boot supports timestamps until 2038-01-19 (0x7fffffff)
[ 15.885148] BTRFS: device label tmp devid 1 transid 4957 /dev/sda6 (8:6) scanned by mount (877)
[ 15.890080] BTRFS info (device sda6): first mount of filesystem 65162d91-887e-4e48-a356-fbf7093eefb5
[ 15.890489] BTRFS info (device sda6): using xxhash64 (xxhash64-generic) checksum algorithm
[ 15.890863] BTRFS info (device sda6): using free-space-tree
[ 159.154019] CPU-temp: 59.9 C
[ 159.154065] , Case: 36.2 C
[ 159.154279] , Fan: 8 (tuned +1)
[ 191.580268] CPU-temp: 60.1 C
[ 191.580301] , Case: 36.3 C
[ 191.580487] , Fan: 9 (tuned +1)
[ 199.208700] kswapd0: page allocation failure: order:0, mode:0xcc0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0
[ 199.209310] CPU: 0 PID: 39 Comm: kswapd0 Not tainted 6.10.0-rc2-PMacG4 #12
[ 199.209637] Hardware name: PowerMac3,6 7455 0x80010303 PowerMac
[ 199.209927] Call Trace:
[ 199.210062] [d02f5950] [90770810] dump_stack_lvl+0x70/0x8c (unreliable)
[ 199.210398] [d02f5970] [901ae5b4] warn_alloc+0x100/0x178
[ 199.210671] [d02f59d0] [901ae99c] __alloc_pages_noprof+0x370/0x8d0
[ 199.210979] [d02f5a90] [901bc598] __read_swap_cache_async+0xc0/0x1cc
[ 199.211294] [d02f5ae0] [901c2da8] zswap_writeback_entry+0x50/0x154
[ 199.211600] [d02f5be0] [901c2f1c] shrink_memcg_cb+0x70/0xec
[ 199.211884] [d02f5c10] [9018d1a0] __list_lru_walk_one+0xa0/0x154
[ 199.212191] [d02f5c70] [9018d2b8] list_lru_walk_one+0x64/0x7c
[ 199.212487] [d02f5ca0] [901c274c] zswap_shrinker_scan+0xac/0xc4
[ 199.212774] [d02f5cd0] [90178590] do_shrink_slab+0x18c/0x2f4
[ 199.213049] [d02f5d20] [90178a94] shrink_slab+0x174/0x260
[ 199.213325] [d02f5da0] [90174bf8] shrink_one+0xbc/0x134
[ 199.213583] [d02f5dd0] [901764c0] shrink_node+0x238/0x850
[ 199.213846] [d02f5e50] [90176e18] balance_pgdat+0x340/0x650
[ 199.214124] [d02f5f50] [90177350] kswapd+0x228/0x25c
[ 199.214377] [d02f5fc0] [90064664] kthread+0xe4/0xe8
[ 199.214643] [d02f5ff0] [900152d4] start_kernel_thread+0x10/0x14
[ 199.215078] Mem-Info:
[ 199.215205] active_anon:216925 inactive_anon:268958 isolated_anon:0
[ 199.215205] active_file:3731 inactive_file:5194 isolated_file:0
[ 199.215205] unevictable:4 dirty:3 writeback:71
[ 199.215205] slab_reclaimable:1604 slab_unreclaimable:5784
[ 199.215205] mapped:5980 shmem:95 pagetables:757
[ 199.215205] sec_pagetables:0 bounce:0
[ 199.215205] kernel_misc_reclaimable:0
[ 199.215205] free:0 free_pcp:500 free_cma:0
[ 199.216732] Node 0 active_anon:867700kB inactive_anon:1075832kB active_file:14924kB inactive_file:20776kB unevictable:16kB isolated(anon):0kB isolated(file):0kB mapped:23920kB dirty:24kB writeback:284kB shmem:380kB writeback_tmp:0kB kernel_stack:1016kB pagetables:3028kB sec_pagetables:0kB all_unreclaimable? no
[ 199.217959] DMA free:0kB boost:8068kB min:11392kB low:12420kB high:13448kB reserved_highatomic:0KB active_anon:493448kB inactive_anon:521632kB active_file:248kB inactive_file:24kB unevictable:0kB writepending:16kB present:1048576kB managed:1030324kB mlocked:0kB bounce:0kB free_pcp:1996kB local_pcp:12kB free_cma:0kB
[ 199.219239] lowmem_reserve[]: 0 492 1004 0
[ 199.219463] Normal free:0kB boost:4096kB min:5720kB low:6224kB high:6728kB reserved_highatomic:0KB active_anon:1684kB inactive_anon:458260kB active_file:100kB inactive_file:272kB unevictable:0kB writepending:12kB present:524288kB managed:504072kB mlocked:0kB bounce:0kB free_pcp:4kB local_pcp:4kB free_cma:0kB
[ 199.220670] lowmem_reserve[]: 0 0 4096 0
[ 199.220885] DMA: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 0kB
[ 199.221383] Normal: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 0kB
[ 199.221911] 328108 total pagecache pages
[ 199.222107] 319084 pages in swap cache
[ 199.222292] Free swap = 7037292kB
[ 199.222483] Total swap = 8388604kB
[ 199.222668] 524288 pages RAM
[ 199.222820] 131072 pages HighMem/MovableOnly
[ 199.223038] 9617 pages reserved
[ 199.247502] SLUB: Unable to allocate memory on node 0, gfp=0xcc0(GFP_KERNEL)
[ 199.247909] cache: zswap_entry, object size: 28, buffer size: 48, default order: 0, min order: 0
[ 199.248367] node 0: slabs: 192, objs: 16320, free: 0
[ 199.248761] SLUB: Unable to allocate memory on node 0, gfp=0xcc0(GFP_KERNEL)
[ 199.249109] cache: zswap_entry, object size: 28, buffer size: 48, default order: 0, min order: 0
[ 199.249521] node 0: slabs: 192, objs: 16320, free: 0
[ 199.249823] SLUB: Unable to allocate memory on node 0, gfp=0xcc0(GFP_KERNEL)
[ 199.250160] cache: zswap_entry, object size: 28, buffer size: 48, default order: 0, min order: 0
[ 199.250588] node 0: slabs: 192, objs: 16320, free: 0
[ 199.250898] SLUB: Unable to allocate memory on node 0, gfp=0xcc0(GFP_KERNEL)
[ 199.251235] cache: zswap_entry, object size: 28, buffer size: 48, default order: 0, min order: 0
[ 199.251660] node 0: slabs: 192, objs: 16320, free: 0
[ 199.251973] SLUB: Unable to allocate memory on node 0, gfp=0xcc0(GFP_KERNEL)
[ 199.252319] cache: zswap_entry, object size: 28, buffer size: 48, default order: 0, min order: 0
[ 199.269934] node 0: slabs: 192, objs: 16320, free: 0
[ 199.287459] SLUB: Unable to allocate memory on node 0, gfp=0xcc0(GFP_KERNEL)
[ 199.305167] cache: zswap_entry, object size: 28, buffer size: 48, default order: 0, min order: 0
[ 199.323156] node 0: slabs: 192, objs: 16320, free: 0
[ 199.341294] SLUB: Unable to allocate memory on node 0, gfp=0xcc0(GFP_KERNEL)
[ 199.359570] cache: zswap_entry, object size: 28, buffer size: 48, default order: 0, min order: 0
[ 199.377821] node 0: slabs: 192, objs: 16320, free: 0
[ 199.395844] SLUB: Unable to allocate memory on node 0, gfp=0xcc0(GFP_KERNEL)
[ 199.413879] cache: zswap_entry, object size: 28, buffer size: 48, default order: 0, min order: 0
[ 199.432131] node 0: slabs: 192, objs: 16320, free: 0
[ 199.450357] SLUB: Unable to allocate memory on node 0, gfp=0xcc0(GFP_KERNEL)
[ 199.468673] cache: zswap_entry, object size: 28, buffer size: 48, default order: 0, min order: 0
[ 199.487076] node 0: slabs: 192, objs: 16320, free: 0
[ 1139.524035] RPC: Registered named UNIX socket transport module.
[ 1139.542957] RPC: Registered udp transport module.
[ 1139.561556] RPC: Registered tcp transport module.
[ 1139.579848] RPC: Registered tcp-with-tls transport module.
[ 1139.598355] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1139.742472] Key type dns_resolver registered
[ 1139.810131] NFS: Registering the id_resolver key type
[ 1139.830739] Key type id_resolver registered
[ 1139.851279] Key type id_legacy registered
[ 1170.822466] BTRFS info (device sda6): last unmount of filesystem 65162d91-887e-4e48-a356-fbf7093eefb5
[ 1170.933298] EXT4-fs (sdc5): unmounting filesystem e4e8af9e-0f0d-44f9-b983-71bf61d782de.
[ 1173.884274] elogind-daemon[1512]: Received signal 15 [TERM]
[ 1174.488875] EXT4-fs (sda5): re-mounted fa07e66f-b4f9-404f-85d8-487d3c097aec ro. Quota mode: disabled.
[ 1174.626034] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 1174.642604] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1174.659528] reboot: Restarting system
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-06 13:28 ` Erhard Furtner
@ 2024-06-06 16:42 ` Yosry Ahmed
0 siblings, 0 replies; 45+ messages in thread
From: Yosry Ahmed @ 2024-06-06 16:42 UTC (permalink / raw)
To: Erhard Furtner
Cc: Yu Zhao, linux-mm, linux-kernel, linuxppc-dev, Johannes Weiner,
Nhat Pham, Chengming Zhou, Sergey Senozhatsky, Minchan Kim,
Vlastimil Babka (SUSE)
On Thu, Jun 6, 2024 at 6:28 AM Erhard Furtner <erhard_f@mailbox.org> wrote:
>
> On Wed, 5 Jun 2024 16:58:11 -0700
> Yosry Ahmed <yosryahmed@google.com> wrote:
>
> > On Wed, Jun 5, 2024 at 4:53 PM Yu Zhao <yuzhao@google.com> wrote:
> > >
> > > On Wed, Jun 5, 2024 at 5:42 PM Yosry Ahmed <yosryahmed@google.com> wrote:
> > > >
> > > > On Wed, Jun 5, 2024 at 4:04 PM Erhard Furtner <erhard_f@mailbox.org> wrote:
> > > > >
> > > > > On Tue, 4 Jun 2024 20:03:27 -0700
> > > > > Yosry Ahmed <yosryahmed@google.com> wrote:
> > > > >
> > > > > > Could you check if the attached patch helps? It basically changes the
> > > > > > number of zpools from 32 to min(32, nr_cpus).
> > > > >
> > > > > Thanks! The patch does not fix the issue but it helps.
> > > > >
> > > > > Means I still get to see the 'kswapd0: page allocation failure' in the dmesg, a 'stress-ng-vm: page allocation failure' later on, another kswapd0 error later on, etc. _but_ the machine keeps running the workload, stays usable via VNC and I get no hard crash any longer.
> > > > >
> > > > > Without patch kswapd0 error and hard crash (need to power-cycle) <3min. With patch several kswapd0 errors but running for 2 hrs now. I double checked this to be sure.
> > > >
> > > > Thanks for trying this out. This is interesting, so even two zpools is
> > > > too much fragmentation for your use case.
> > >
> > > Now I'm a little bit skeptical that the problem is due to fragmentation.
> > >
> > > > I think there are multiple ways to go forward here:
> > > > (a) Make the number of zpools a config option, leave the default as
> > > > 32, but allow special use cases to set it to 1 or similar. This is
> > > > probably not preferable because it is not clear to users how to set
> > > > it, but the idea is that no one will have to set it except special use
> > > > cases such as Erhard's (who will want to set it to 1 in this case).
> > > >
> > > > (b) Make the number of zpools scale linearly with the number of CPUs.
> > > > Maybe something like nr_cpus/4 or nr_cpus/8. The problem with this
> > > > approach is that with a large number of CPUs, too many zpools will
> > > > start having diminishing returns. Fragmentation will keep increasing,
> > > > while the scalability/concurrency gains will diminish.
> > > >
> > > > (c) Make the number of zpools scale logarithmically with the number of
> > > > CPUs. Maybe something like 4log2(nr_cpus). This will keep the number
> > > > of zpools from increasing too much and close to the status quo. The
> > > > problem is that at a small number of CPUs (e.g. 2), 4log2(nr_cpus)
> > > > will actually give a nr_zpools > nr_cpus. So we will need to come up
> > > > with a more fancy magic equation (e.g. 4log2(nr_cpus/4)).
> > > >
> > > > (d) Make the number of zpools scale linearly with memory. This makes
> > > > more sense than scaling with CPUs because increasing the number of
> > > > zpools increases fragmentation, so it makes sense to limit it by the
> > > > available memory. This is also more consistent with other magic
> > > > numbers we have (e.g. SWAP_ADDRESS_SPACE_SHIFT).
> > > >
> > > > The problem is that unlike zswap trees, the zswap pool is not
> > > > connected to the swapfile size, so we don't have an indication for how
> > > > much memory will be in the zswap pool. We can scale the number of
> > > > zpools with the entire memory on the machine during boot, but this
> > > > seems like it would be difficult to figure out, and will not take into
> > > > consideration memory hotplugging and the zswap global limit changing.
> > > >
> > > > (e) A creative mix of the above.
> > > >
> > > > (f) Something else (probably simpler).
> > > >
> > > > I am personally leaning toward (c), but I want to hear the opinions of
> > > > other people here. Yu, Vlastimil, Johannes, Nhat? Anyone else?
> > >
> > > I double checked that commit and didn't find anything wrong. If we are
> > > all in the mood of getting to the bottom, can we try using only 1
> > > zpool while there are 2 available? I.e.,
> >
> > Erhard, do you mind checking if Yu's diff below to use a single zpool
> > fixes the problem completely? There is also an attached patch that
> > does the same thing if this is easier to apply for you.
>
> No, setting ZSWAP_NR_ZPOOLS to 1 does not fix the problem unfortunately (that being the only patch applied on v6.10-rc2).
This confirms Yu's theory that the zpools fragmentation is not the
main reason for the problem. As Vlastimil said, the setup is already
tight on memory and that commit may have just pushed it over the edge.
Since setting ZSWAP_NR_ZPOOLS to 1 (which effectively reverts the
commit) does not help in v6.10-rc2, then something else that came
after the commit would have pushed it over the edge anyway.
>
> Trying to alter the lowmem and virtual mem limits next as Michael suggested.
I saw that this worked. So it seems like we don't need to worry about
the number of zpools, for now at least :)
Thanks for helping with the testing, and thanks to everyone else who
helped on this thread.
>
> Regards,
> Erhard
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-06 13:32 ` Erhard Furtner
@ 2024-06-06 16:53 ` Vlastimil Babka (SUSE)
0 siblings, 0 replies; 45+ messages in thread
From: Vlastimil Babka (SUSE) @ 2024-06-06 16:53 UTC (permalink / raw)
To: Erhard Furtner
Cc: Yosry Ahmed, Yu Zhao, linux-mm, linux-kernel, linuxppc-dev,
Johannes Weiner, Nhat Pham, Chengming Zhou, Sergey Senozhatsky,
Minchan Kim, Michal Hocko
On 6/6/24 3:32 PM, Erhard Furtner wrote:
> On Thu, 6 Jun 2024 09:24:56 +0200
> "Vlastimil Babka (SUSE)" <vbabka@kernel.org> wrote:
>
>> Besides the zpool commit which might have just pushed the machine over the
>> edge, but it was probably close to it already. I've noticed a more general
>> problem that there are GFP_KERNEL allocations failing from kswapd. Those
>> could probably use be __GFP_NOMEMALLOC (or scoped variant, is there one?)
>> since it's the case of "allocating memory to free memory". Or use mempools
>> if the progress (success will lead to freeing memory) is really guaranteed.
>>
>> Another interesting data point could be to see if traditional reclaim
>> behaves any better on this machine than MGLRU. I saw in the config:
>>
>> CONFIG_LRU_GEN=y
>> CONFIG_LRU_GEN_ENABLED=y
>>
>> So disabling at least the second one would revert to the traditional reclaim
>> and we could see if it handles such a constrained system better or not.
>
> I set RANDOM_KMALLOC_CACHES=n and LRU_GEN_ENABLED=n but still hit the issue.
>
> dmesg looks a bit different (unpatched v6.10-rc2).
What caught my eye, but it's also in some of the previous dmesg with MGRLU,
is that in one case there's:
DMA free:0kB
That means many allocations went through that are allowed to just ignore all
reserves, and depleted everything. That would mean __GFP_MEMALLOC or
PF_MEMALLOC, which I suggested earlier for the GFP_KERNEL failure, is being
used somewhere, but not leading to the expected memory freeing.
> Regards,
> Erhard
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-05 23:41 ` Yosry Ahmed
` (2 preceding siblings ...)
2024-06-06 7:24 ` Vlastimil Babka (SUSE)
@ 2024-06-06 17:14 ` Takero Funaki
2024-06-06 17:41 ` Yosry Ahmed
3 siblings, 1 reply; 45+ messages in thread
From: Takero Funaki @ 2024-06-06 17:14 UTC (permalink / raw)
To: Yosry Ahmed
Cc: Erhard Furtner, Yu Zhao, linux-mm, linux-kernel, linuxppc-dev,
Johannes Weiner, Nhat Pham, Chengming Zhou, Sergey Senozhatsky,
Minchan Kim, Vlastimil Babka (SUSE)
2024年6月6日(木) 8:42 Yosry Ahmed <yosryahmed@google.com>:
> I think there are multiple ways to go forward here:
> (a) Make the number of zpools a config option, leave the default as
> 32, but allow special use cases to set it to 1 or similar. This is
> probably not preferable because it is not clear to users how to set
> it, but the idea is that no one will have to set it except special use
> cases such as Erhard's (who will want to set it to 1 in this case).
>
> (b) Make the number of zpools scale linearly with the number of CPUs.
> Maybe something like nr_cpus/4 or nr_cpus/8. The problem with this
> approach is that with a large number of CPUs, too many zpools will
> start having diminishing returns. Fragmentation will keep increasing,
> while the scalability/concurrency gains will diminish.
>
> (c) Make the number of zpools scale logarithmically with the number of
> CPUs. Maybe something like 4log2(nr_cpus). This will keep the number
> of zpools from increasing too much and close to the status quo. The
> problem is that at a small number of CPUs (e.g. 2), 4log2(nr_cpus)
> will actually give a nr_zpools > nr_cpus. So we will need to come up
> with a more fancy magic equation (e.g. 4log2(nr_cpus/4)).
>
I just posted a patch to limit the number of zpools, with some
theoretical background explained in the code comments. I believe that
2 * CPU linearly is sufficient to reduce contention, but the scale can
be reduced further. All CPUs are trying to allocate/free zswap is
unlikely to happen.
How many concurrent accesses were the original 32 zpools supposed to
handle? I think it was for 16 cpu or more. or nr_cpus/4 would be
enough?
--
<flintglass@gmail.com>
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-06 17:14 ` Takero Funaki
@ 2024-06-06 17:41 ` Yosry Ahmed
2024-06-06 17:55 ` Yu Zhao
0 siblings, 1 reply; 45+ messages in thread
From: Yosry Ahmed @ 2024-06-06 17:41 UTC (permalink / raw)
To: Takero Funaki
Cc: Erhard Furtner, Yu Zhao, linux-mm, linux-kernel, linuxppc-dev,
Johannes Weiner, Nhat Pham, Chengming Zhou, Sergey Senozhatsky,
Minchan Kim, Vlastimil Babka (SUSE)
On Thu, Jun 6, 2024 at 10:14 AM Takero Funaki <flintglass@gmail.com> wrote:
>
> 2024年6月6日(木) 8:42 Yosry Ahmed <yosryahmed@google.com>:
>
> > I think there are multiple ways to go forward here:
> > (a) Make the number of zpools a config option, leave the default as
> > 32, but allow special use cases to set it to 1 or similar. This is
> > probably not preferable because it is not clear to users how to set
> > it, but the idea is that no one will have to set it except special use
> > cases such as Erhard's (who will want to set it to 1 in this case).
> >
> > (b) Make the number of zpools scale linearly with the number of CPUs.
> > Maybe something like nr_cpus/4 or nr_cpus/8. The problem with this
> > approach is that with a large number of CPUs, too many zpools will
> > start having diminishing returns. Fragmentation will keep increasing,
> > while the scalability/concurrency gains will diminish.
> >
> > (c) Make the number of zpools scale logarithmically with the number of
> > CPUs. Maybe something like 4log2(nr_cpus). This will keep the number
> > of zpools from increasing too much and close to the status quo. The
> > problem is that at a small number of CPUs (e.g. 2), 4log2(nr_cpus)
> > will actually give a nr_zpools > nr_cpus. So we will need to come up
> > with a more fancy magic equation (e.g. 4log2(nr_cpus/4)).
> >
>
> I just posted a patch to limit the number of zpools, with some
> theoretical background explained in the code comments. I believe that
> 2 * CPU linearly is sufficient to reduce contention, but the scale can
> be reduced further. All CPUs are trying to allocate/free zswap is
> unlikely to happen.
> How many concurrent accesses were the original 32 zpools supposed to
> handle? I think it was for 16 cpu or more. or nr_cpus/4 would be
> enough?
We use 32 zpools on machines with 100s of CPUs. Two zpools per CPU is
an overkill imo.
I have further comments that I will leave on the patch, but I mainly
think this should be driven by real data, not theoretical possibility
of lock contention.
>
> --
>
> <flintglass@gmail.com>
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-06 17:41 ` Yosry Ahmed
@ 2024-06-06 17:55 ` Yu Zhao
2024-06-06 18:03 ` Yosry Ahmed
0 siblings, 1 reply; 45+ messages in thread
From: Yu Zhao @ 2024-06-06 17:55 UTC (permalink / raw)
To: Yosry Ahmed, Takero Funaki
Cc: Erhard Furtner, linux-mm, linux-kernel, linuxppc-dev,
Johannes Weiner, Nhat Pham, Chengming Zhou, Sergey Senozhatsky,
Minchan Kim, Vlastimil Babka (SUSE)
On Thu, Jun 6, 2024 at 11:42 AM Yosry Ahmed <yosryahmed@google.com> wrote:
>
> On Thu, Jun 6, 2024 at 10:14 AM Takero Funaki <flintglass@gmail.com> wrote:
> >
> > 2024年6月6日(木) 8:42 Yosry Ahmed <yosryahmed@google.com>:
> >
> > > I think there are multiple ways to go forward here:
> > > (a) Make the number of zpools a config option, leave the default as
> > > 32, but allow special use cases to set it to 1 or similar. This is
> > > probably not preferable because it is not clear to users how to set
> > > it, but the idea is that no one will have to set it except special use
> > > cases such as Erhard's (who will want to set it to 1 in this case).
> > >
> > > (b) Make the number of zpools scale linearly with the number of CPUs.
> > > Maybe something like nr_cpus/4 or nr_cpus/8. The problem with this
> > > approach is that with a large number of CPUs, too many zpools will
> > > start having diminishing returns. Fragmentation will keep increasing,
> > > while the scalability/concurrency gains will diminish.
> > >
> > > (c) Make the number of zpools scale logarithmically with the number of
> > > CPUs. Maybe something like 4log2(nr_cpus). This will keep the number
> > > of zpools from increasing too much and close to the status quo. The
> > > problem is that at a small number of CPUs (e.g. 2), 4log2(nr_cpus)
> > > will actually give a nr_zpools > nr_cpus. So we will need to come up
> > > with a more fancy magic equation (e.g. 4log2(nr_cpus/4)).
> > >
> >
> > I just posted a patch to limit the number of zpools, with some
> > theoretical background explained in the code comments. I believe that
> > 2 * CPU linearly is sufficient to reduce contention, but the scale can
> > be reduced further. All CPUs are trying to allocate/free zswap is
> > unlikely to happen.
> > How many concurrent accesses were the original 32 zpools supposed to
> > handle? I think it was for 16 cpu or more. or nr_cpus/4 would be
> > enough?
>
> We use 32 zpools on machines with 100s of CPUs. Two zpools per CPU is
> an overkill imo.
Not to choose a camp; just a friendly note on why I strongly disagree
with the N zpools per CPU approach:
1. It is fundamentally flawed to assume the system is linear;
2. Nonlinear systems usually have diminishing returns.
For Google data centers, using nr_cpus as the scaling factor had long
passed the acceptable ROI threshold. Per-CPU data, especially when
compounded per memcg or even per process, is probably the number-one
overhead in terms of DRAM efficiency.
> I have further comments that I will leave on the patch, but I mainly
> think this should be driven by real data, not theoretical possibility
> of lock contention.
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-06 17:55 ` Yu Zhao
@ 2024-06-06 18:03 ` Yosry Ahmed
0 siblings, 0 replies; 45+ messages in thread
From: Yosry Ahmed @ 2024-06-06 18:03 UTC (permalink / raw)
To: Yu Zhao
Cc: Takero Funaki, Erhard Furtner, linux-mm, linux-kernel,
linuxppc-dev, Johannes Weiner, Nhat Pham, Chengming Zhou,
Sergey Senozhatsky, Minchan Kim, Vlastimil Babka (SUSE)
On Thu, Jun 6, 2024 at 10:55 AM Yu Zhao <yuzhao@google.com> wrote:
>
> On Thu, Jun 6, 2024 at 11:42 AM Yosry Ahmed <yosryahmed@google.com> wrote:
> >
> > On Thu, Jun 6, 2024 at 10:14 AM Takero Funaki <flintglass@gmail.com> wrote:
> > >
> > > 2024年6月6日(木) 8:42 Yosry Ahmed <yosryahmed@google.com>:
> > >
> > > > I think there are multiple ways to go forward here:
> > > > (a) Make the number of zpools a config option, leave the default as
> > > > 32, but allow special use cases to set it to 1 or similar. This is
> > > > probably not preferable because it is not clear to users how to set
> > > > it, but the idea is that no one will have to set it except special use
> > > > cases such as Erhard's (who will want to set it to 1 in this case).
> > > >
> > > > (b) Make the number of zpools scale linearly with the number of CPUs.
> > > > Maybe something like nr_cpus/4 or nr_cpus/8. The problem with this
> > > > approach is that with a large number of CPUs, too many zpools will
> > > > start having diminishing returns. Fragmentation will keep increasing,
> > > > while the scalability/concurrency gains will diminish.
> > > >
> > > > (c) Make the number of zpools scale logarithmically with the number of
> > > > CPUs. Maybe something like 4log2(nr_cpus). This will keep the number
> > > > of zpools from increasing too much and close to the status quo. The
> > > > problem is that at a small number of CPUs (e.g. 2), 4log2(nr_cpus)
> > > > will actually give a nr_zpools > nr_cpus. So we will need to come up
> > > > with a more fancy magic equation (e.g. 4log2(nr_cpus/4)).
> > > >
> > >
> > > I just posted a patch to limit the number of zpools, with some
> > > theoretical background explained in the code comments. I believe that
> > > 2 * CPU linearly is sufficient to reduce contention, but the scale can
> > > be reduced further. All CPUs are trying to allocate/free zswap is
> > > unlikely to happen.
> > > How many concurrent accesses were the original 32 zpools supposed to
> > > handle? I think it was for 16 cpu or more. or nr_cpus/4 would be
> > > enough?
> >
> > We use 32 zpools on machines with 100s of CPUs. Two zpools per CPU is
> > an overkill imo.
>
> Not to choose a camp; just a friendly note on why I strongly disagree
> with the N zpools per CPU approach:
> 1. It is fundamentally flawed to assume the system is linear;
> 2. Nonlinear systems usually have diminishing returns.
>
> For Google data centers, using nr_cpus as the scaling factor had long
> passed the acceptable ROI threshold. Per-CPU data, especially when
> compounded per memcg or even per process, is probably the number-one
> overhead in terms of DRAM efficiency.
100% agreed. If you look at option (b) above, I specifically called
out that scaling the number of zpools linearly with the number with
CPUs have diminishing returns :)
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-06 5:43 ` Sergey Senozhatsky
2024-06-06 5:55 ` Chengming Zhou
@ 2024-06-07 9:40 ` Nhat Pham
2024-06-07 11:20 ` Sergey Senozhatsky
1 sibling, 1 reply; 45+ messages in thread
From: Nhat Pham @ 2024-06-07 9:40 UTC (permalink / raw)
To: Sergey Senozhatsky
Cc: Chengming Zhou, Yosry Ahmed, Erhard Furtner, Yu Zhao, linux-mm,
linux-kernel, linuxppc-dev, Johannes Weiner, Minchan Kim,
Vlastimil Babka (SUSE)
On Thu, Jun 6, 2024 at 6:43 AM Sergey Senozhatsky
<senozhatsky@chromium.org> wrote:
>
> On (24/06/06 12:46), Chengming Zhou wrote:
> > >> Agree, I think we should try to improve locking scalability of zsmalloc.
> > >> I have some thoughts to share, no code or test data yet:
> > >>
> > >> 1. First, we can change the pool global lock to per-class lock, which
> > >> is more fine-grained.
> > >
> > > Commit c0547d0b6a4b6 "zsmalloc: consolidate zs_pool's migrate_lock
> > > and size_class's locks" [1] claimed no significant difference
> > > between class->lock and pool->lock.
> >
> > Ok, I haven't looked into the history much, that seems preparation of trying
> > to introduce reclaim in the zsmalloc? Not sure. But now with the reclaim code
> > in zsmalloc has gone, should we change back to the per-class lock? Which is
>
> Well, the point that commit made was that Nhat (and Johannes?) were
> unable to detect any impact of pool->lock on a variety of cases. So
> we went on with code simplification.
Yeah, we benchmarked it before zsmalloc writeback was introduced (the
patch to remove class lock was a prep patch of the series). We weren't
able to detect any regression at the time with just using a global
pool lock.
>
> > obviously more fine-grained than the pool lock. Actually, I have just done it,
> > will test to get some data later.
>
> Thanks, we'll need data on this. I'm happy to take the patch, but
> jumping back and forth between class->lock and pool->lock merely
> "for obvious reasons" is not what I'm extremely excited about.
FWIW, I do think it'd be nice if we can make the locking more granular
- the pool lock now is essentially a global lock, and we're just
getting around that by replicating the (z)pools themselves.
Personally, I'm not super convinced about class locks. We're
essentially relying on the post-compression size of the data to
load-balance the queries - I can imagine a scenario where a workload
has a concentrated distribution of post-compression data (i.e its
pages are compressed to similar-ish sizes), and we're once again
contending for a (few) lock(s) again.
That said, I'll let the data tell the story :) We don't need a perfect
solution, just a good enough solution for now.
^ permalink raw reply [flat|nested] 45+ messages in thread
* Re: kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc)
2024-06-07 9:40 ` Nhat Pham
@ 2024-06-07 11:20 ` Sergey Senozhatsky
0 siblings, 0 replies; 45+ messages in thread
From: Sergey Senozhatsky @ 2024-06-07 11:20 UTC (permalink / raw)
To: Nhat Pham
Cc: Sergey Senozhatsky, Chengming Zhou, Yosry Ahmed, Erhard Furtner,
Yu Zhao, linux-mm, linux-kernel, linuxppc-dev, Johannes Weiner,
Minchan Kim, Vlastimil Babka (SUSE)
On (24/06/07 10:40), Nhat Pham wrote:
> Personally, I'm not super convinced about class locks. We're
> essentially relying on the post-compression size of the data to
> load-balance the queries - I can imagine a scenario where a workload
> has a concentrated distribution of post-compression data (i.e its
> pages are compressed to similar-ish sizes), and we're once again
> contending for a (few) lock(s) again.
>
> That said, I'll let the data tell the story :) We don't need a perfect
> solution, just a good enough solution for now.
Speaking of size class locks:
One thing to mention is that zsmalloc merges size classes, we never have
documented/claimed 256 size classe, the actual number is always much
much lower. Each such "cluster" (merged size classes) holds a range of
objects' sizes (e.g. 3504-3584 bytes). The wider the cluster's size range
the more likely the (size class) lock contention is.
Setting CONFIG_ZSMALLOC_CHAIN_SIZE to 10 or higher makes zsmalloc pool
to be configured with more size class clusters (which means that clusters
hold narrower size intervals).
^ permalink raw reply [flat|nested] 45+ messages in thread
end of thread, other threads:[~2024-06-07 11:21 UTC | newest]
Thread overview: 45+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-05-08 18:21 kswapd0: page allocation failure: order:0, mode:0x820(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0 (Kernel v6.5.9, 32bit ppc) Erhard Furtner
2024-05-15 20:45 ` Erhard Furtner
2024-05-15 22:06 ` Yu Zhao
2024-06-01 6:01 ` Yu Zhao
2024-06-01 15:37 ` David Hildenbrand
2024-06-06 3:11 ` Michael Ellerman
2024-06-06 3:38 ` Yu Zhao
2024-06-06 12:08 ` Michael Ellerman
2024-06-06 16:05 ` Erhard Furtner
2024-06-02 18:03 ` Erhard Furtner
2024-06-02 20:38 ` Yu Zhao
2024-06-02 21:36 ` Erhard Furtner
2024-06-03 22:13 ` Erhard Furtner
2024-06-03 23:24 ` Yosry Ahmed
[not found] ` <20240604134458.3ae4396a@yea>
2024-06-04 16:11 ` Yosry Ahmed
2024-06-04 17:18 ` Yu Zhao
2024-06-04 17:34 ` Yosry Ahmed
2024-06-04 17:53 ` Yu Zhao
2024-06-04 18:01 ` Yosry Ahmed
2024-06-04 21:00 ` Vlastimil Babka (SUSE)
2024-06-04 21:10 ` Erhard Furtner
2024-06-05 3:03 ` Yosry Ahmed
2024-06-05 23:04 ` Erhard Furtner
2024-06-05 23:41 ` Yosry Ahmed
2024-06-05 23:52 ` Yu Zhao
2024-06-05 23:58 ` Yosry Ahmed
2024-06-06 13:28 ` Erhard Furtner
2024-06-06 16:42 ` Yosry Ahmed
2024-06-06 2:49 ` Chengming Zhou
2024-06-06 4:31 ` Sergey Senozhatsky
2024-06-06 4:46 ` Chengming Zhou
2024-06-06 5:43 ` Sergey Senozhatsky
2024-06-06 5:55 ` Chengming Zhou
2024-06-07 9:40 ` Nhat Pham
2024-06-07 11:20 ` Sergey Senozhatsky
2024-06-06 7:24 ` Vlastimil Babka (SUSE)
2024-06-06 13:32 ` Erhard Furtner
2024-06-06 16:53 ` Vlastimil Babka (SUSE)
2024-06-06 17:14 ` Takero Funaki
2024-06-06 17:41 ` Yosry Ahmed
2024-06-06 17:55 ` Yu Zhao
2024-06-06 18:03 ` Yosry Ahmed
2024-06-04 22:17 ` Erhard Furtner
2024-06-04 20:52 ` Vlastimil Babka (SUSE)
2024-06-04 20:55 ` Yosry Ahmed
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox