linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Michael Roth <michael.roth@amd.com>
To: <kvm@vger.kernel.org>
Cc: <linux-coco@lists.linux.dev>, <linux-mm@kvack.org>,
	<linux-crypto@vger.kernel.org>, <x86@kernel.org>,
	<linux-kernel@vger.kernel.org>, <jroedel@suse.de>,
	<thomas.lendacky@amd.com>, <pbonzini@redhat.com>,
	<seanjc@google.com>, <pgonda@google.com>, <ashish.kalra@amd.com>,
	<nikunj.dadhania@amd.com>, <pankaj.gupta@amd.com>,
	Brijesh Singh <brijesh.singh@amd.com>
Subject: [PATCH 2/4] KVM: SEV: Add GHCB handling for Hypervisor Feature Support requests
Date: Wed, 1 May 2024 02:10:46 -0500	[thread overview]
Message-ID: <20240501071048.2208265-3-michael.roth@amd.com> (raw)
In-Reply-To: <20240501071048.2208265-1-michael.roth@amd.com>

From: Brijesh Singh <brijesh.singh@amd.com>

Version 2 of the GHCB specification introduced advertisement of features
that are supported by the Hypervisor.

Now that KVM supports version 2 of the GHCB specification, bump the
maximum supported protocol version.

Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
---
 arch/x86/include/asm/sev-common.h |  2 ++
 arch/x86/kvm/svm/sev.c            | 14 ++++++++++++++
 2 files changed, 16 insertions(+)

diff --git a/arch/x86/include/asm/sev-common.h b/arch/x86/include/asm/sev-common.h
index 01261f7054ad..5a8246dd532f 100644
--- a/arch/x86/include/asm/sev-common.h
+++ b/arch/x86/include/asm/sev-common.h
@@ -101,6 +101,8 @@ enum psc_op {
 /* GHCB Hypervisor Feature Request/Response */
 #define GHCB_MSR_HV_FT_REQ		0x080
 #define GHCB_MSR_HV_FT_RESP		0x081
+#define GHCB_MSR_HV_FT_POS		12
+#define GHCB_MSR_HV_FT_MASK		GENMASK_ULL(51, 0)
 #define GHCB_MSR_HV_FT_RESP_VAL(v)			\
 	/* GHCBData[63:12] */				\
 	(((u64)(v) & GENMASK_ULL(63, 12)) >> 12)
diff --git a/arch/x86/kvm/svm/sev.c b/arch/x86/kvm/svm/sev.c
index 6e31cb408dd8..37d396636b71 100644
--- a/arch/x86/kvm/svm/sev.c
+++ b/arch/x86/kvm/svm/sev.c
@@ -36,6 +36,8 @@
 #define GHCB_VERSION_MAX	1ULL
 #define GHCB_VERSION_MIN	1ULL
 
+#define GHCB_HV_FT_SUPPORTED	GHCB_HV_FT_SNP
+
 /* enable/disable SEV support */
 static bool sev_enabled = true;
 module_param_named(sev, sev_enabled, bool, 0444);
@@ -2701,6 +2703,7 @@ static int sev_es_validate_vmgexit(struct vcpu_svm *svm)
 	case SVM_VMGEXIT_AP_HLT_LOOP:
 	case SVM_VMGEXIT_AP_JUMP_TABLE:
 	case SVM_VMGEXIT_UNSUPPORTED_EVENT:
+	case SVM_VMGEXIT_HV_FEATURES:
 		break;
 	default:
 		reason = GHCB_ERR_INVALID_EVENT;
@@ -2961,6 +2964,12 @@ static int sev_handle_vmgexit_msr_protocol(struct vcpu_svm *svm)
 				  GHCB_MSR_INFO_MASK,
 				  GHCB_MSR_INFO_POS);
 		break;
+	case GHCB_MSR_HV_FT_REQ:
+		set_ghcb_msr_bits(svm, GHCB_HV_FT_SUPPORTED,
+				  GHCB_MSR_HV_FT_MASK, GHCB_MSR_HV_FT_POS);
+		set_ghcb_msr_bits(svm, GHCB_MSR_HV_FT_RESP,
+				  GHCB_MSR_INFO_MASK, GHCB_MSR_INFO_POS);
+		break;
 	case GHCB_MSR_TERM_REQ: {
 		u64 reason_set, reason_code;
 
@@ -3085,6 +3094,11 @@ int sev_handle_vmgexit(struct kvm_vcpu *vcpu)
 		ret = 1;
 		break;
 	}
+	case SVM_VMGEXIT_HV_FEATURES:
+		ghcb_set_sw_exit_info_2(svm->sev_es.ghcb, GHCB_HV_FT_SUPPORTED);
+
+		ret = 1;
+		break;
 	case SVM_VMGEXIT_UNSUPPORTED_EVENT:
 		vcpu_unimpl(vcpu,
 			    "vmgexit: unsupported event - exit_info_1=%#llx, exit_info_2=%#llx\n",
-- 
2.25.1



  parent reply	other threads:[~2024-05-01  7:47 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-05-01  7:10 [PATCH 0/4] Add SEV-ES hypervisor support for GHCB protocol version 2 Michael Roth
2024-05-01  7:10 ` [PATCH 1/4] KVM: SEV: Add support to handle AP reset MSR protocol Michael Roth
2024-05-01  7:10 ` Michael Roth [this message]
2024-05-01  7:10 ` [PATCH 3/4] KVM: SEV: Add GHCB handling for termination requests Michael Roth
2024-05-01  7:10 ` [PATCH 4/4] KVM: SEV: Allow per-guest configuration of GHCB protocol version Michael Roth

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240501071048.2208265-3-michael.roth@amd.com \
    --to=michael.roth@amd.com \
    --cc=ashish.kalra@amd.com \
    --cc=brijesh.singh@amd.com \
    --cc=jroedel@suse.de \
    --cc=kvm@vger.kernel.org \
    --cc=linux-coco@lists.linux.dev \
    --cc=linux-crypto@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=nikunj.dadhania@amd.com \
    --cc=pankaj.gupta@amd.com \
    --cc=pbonzini@redhat.com \
    --cc=pgonda@google.com \
    --cc=seanjc@google.com \
    --cc=thomas.lendacky@amd.com \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox