linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Samuel Holland <samuel.holland@sifive.com>
To: Palmer Dabbelt <palmer@dabbelt.com>, linux-riscv@lists.infradead.org
Cc: linux-kernel@vger.kernel.org, linux-mm@kvack.org,
	Alexandre Ghiti <alexghiti@rivosinc.com>,
	Jisheng Zhang <jszhang@kernel.org>,
	Yunhui Cui <cuiyunhui@bytedance.com>,
	Samuel Holland <samuel.holland@sifive.com>
Subject: [PATCH v5 10/13] riscv: mm: Use a fixed layout for the MM context ID
Date: Thu, 29 Feb 2024 15:21:51 -0800	[thread overview]
Message-ID: <20240229232211.161961-11-samuel.holland@sifive.com> (raw)
In-Reply-To: <20240229232211.161961-1-samuel.holland@sifive.com>

Currently, the size of the ASID field in the MM context ID dynamically
depends on the number of hardware-supported ASID bits. This requires
reading a global variable to extract either field from the context ID.
Instead, allocate the maximum possible number of bits to the ASID field,
so the layout of the context ID is known at compile-time.

Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
---

(no changes since v1)

 arch/riscv/include/asm/mmu.h      | 4 ++--
 arch/riscv/include/asm/tlbflush.h | 2 --
 arch/riscv/mm/context.c           | 6 ++----
 3 files changed, 4 insertions(+), 8 deletions(-)

diff --git a/arch/riscv/include/asm/mmu.h b/arch/riscv/include/asm/mmu.h
index a550fbf770be..dc0273f7905f 100644
--- a/arch/riscv/include/asm/mmu.h
+++ b/arch/riscv/include/asm/mmu.h
@@ -26,8 +26,8 @@ typedef struct {
 #endif
 } mm_context_t;
 
-#define cntx2asid(cntx)		((cntx) & asid_mask)
-#define cntx2version(cntx)	((cntx) & ~asid_mask)
+#define cntx2asid(cntx)		((cntx) & SATP_ASID_MASK)
+#define cntx2version(cntx)	((cntx) & ~SATP_ASID_MASK)
 
 void __init create_pgd_mapping(pgd_t *pgdp, uintptr_t va, phys_addr_t pa,
 			       phys_addr_t sz, pgprot_t prot);
diff --git a/arch/riscv/include/asm/tlbflush.h b/arch/riscv/include/asm/tlbflush.h
index 8e329721375b..72e559934952 100644
--- a/arch/riscv/include/asm/tlbflush.h
+++ b/arch/riscv/include/asm/tlbflush.h
@@ -15,8 +15,6 @@
 #define FLUSH_TLB_NO_ASID       ((unsigned long)-1)
 
 #ifdef CONFIG_MMU
-extern unsigned long asid_mask;
-
 static inline void local_flush_tlb_all(void)
 {
 	__asm__ __volatile__ ("sfence.vma" : : : "memory");
diff --git a/arch/riscv/mm/context.c b/arch/riscv/mm/context.c
index b562b3c44487..5315af06cd4d 100644
--- a/arch/riscv/mm/context.c
+++ b/arch/riscv/mm/context.c
@@ -22,7 +22,6 @@ DEFINE_STATIC_KEY_FALSE(use_asid_allocator);
 
 static unsigned long asid_bits;
 static unsigned long num_asids;
-unsigned long asid_mask;
 
 static atomic_long_t current_version;
 
@@ -128,7 +127,7 @@ static unsigned long __new_context(struct mm_struct *mm)
 		goto set_asid;
 
 	/* We're out of ASIDs, so increment current_version */
-	ver = atomic_long_add_return_relaxed(num_asids, &current_version);
+	ver = atomic_long_add_return_relaxed(BIT(SATP_ASID_BITS), &current_version);
 
 	/* Flush everything  */
 	__flush_context();
@@ -247,7 +246,6 @@ static int __init asids_init(void)
 	/* Pre-compute ASID details */
 	if (asid_bits) {
 		num_asids = 1 << asid_bits;
-		asid_mask = num_asids - 1;
 	}
 
 	/*
@@ -255,7 +253,7 @@ static int __init asids_init(void)
 	 * at-least twice more than CPUs
 	 */
 	if (num_asids > (2 * num_possible_cpus())) {
-		atomic_long_set(&current_version, num_asids);
+		atomic_long_set(&current_version, BIT(SATP_ASID_BITS));
 
 		context_asid_map = bitmap_zalloc(num_asids, GFP_KERNEL);
 		if (!context_asid_map)
-- 
2.43.1



  parent reply	other threads:[~2024-02-29 23:22 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-29 23:21 [PATCH v5 00/13] riscv: ASID-related and UP-related TLB flush enhancements Samuel Holland
2024-02-29 23:21 ` [PATCH v5 01/13] riscv: Flush the instruction cache during SMP bringup Samuel Holland
2024-02-29 23:21 ` [PATCH v5 02/13] riscv: Factor out page table TLB synchronization Samuel Holland
2024-02-29 23:21 ` [PATCH v5 03/13] riscv: Use IPIs for remote cache/TLB flushes by default Samuel Holland
2024-03-11  3:06   ` Stefan O'Rear
2024-03-11  4:04     ` Anup Patel
2024-03-11  4:12       ` Anup Patel
2024-03-11  4:42         ` Samuel Holland
2024-02-29 23:21 ` [PATCH v5 04/13] riscv: mm: Broadcast kernel TLB flushes only when needed Samuel Holland
2024-02-29 23:21 ` [PATCH v5 05/13] riscv: Only send remote fences when some other CPU is online Samuel Holland
2024-02-29 23:21 ` [PATCH v5 06/13] riscv: mm: Combine the SMP and UP TLB flush code Samuel Holland
2024-03-01  2:12   ` [External] " yunhui cui
2024-03-01  2:34     ` Samuel Holland
2024-02-29 23:21 ` [PATCH v5 07/13] riscv: Apply SiFive CIP-1200 workaround to single-ASID sfence.vma Samuel Holland
2024-02-29 23:21 ` [PATCH v5 08/13] riscv: Avoid TLB flush loops when affected by SiFive CIP-1200 Samuel Holland
2024-03-01  2:48   ` [External] " yunhui cui
2024-03-12  0:35     ` Samuel Holland
2024-03-12  1:51       ` yunhui cui
2024-02-29 23:21 ` [PATCH v5 09/13] riscv: mm: Introduce cntx2asid/cntx2version helper macros Samuel Holland
2024-02-29 23:21 ` Samuel Holland [this message]
2024-02-29 23:21 ` [PATCH v5 11/13] riscv: mm: Make asid_bits a local variable Samuel Holland
2024-02-29 23:21 ` [PATCH v5 12/13] riscv: mm: Preserve global TLB entries when switching contexts Samuel Holland
2024-02-29 23:21 ` [PATCH v5 13/13] riscv: mm: Always use an ASID to flush mm contexts Samuel Holland
2024-03-01  9:31 ` [PATCH v5 00/13] riscv: ASID-related and UP-related TLB flush enhancements Conor Dooley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240229232211.161961-11-samuel.holland@sifive.com \
    --to=samuel.holland@sifive.com \
    --cc=alexghiti@rivosinc.com \
    --cc=cuiyunhui@bytedance.com \
    --cc=jszhang@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox