From: Joey Gouly <joey.gouly@arm.com>
To: linux-arm-kernel@lists.infradead.org
Cc: akpm@linux-foundation.org, aneesh.kumar@linux.ibm.com,
broonie@kernel.org, catalin.marinas@arm.com,
dave.hansen@linux.intel.com, joey.gouly@arm.com, maz@kernel.org,
oliver.upton@linux.dev, shuah@kernel.org, will@kernel.org,
kvmarm@lists.linux.dev, linux-fsdevel@vger.kernel.org,
linux-mm@kvack.org, linux-kselftest@vger.kernel.org,
James Morse <james.morse@arm.com>,
Suzuki K Poulose <suzuki.poulose@arm.com>,
Zenghui Yu <yuzenghui@huawei.com>
Subject: [PATCH v2 15/24] arm64: add POE signal support
Date: Fri, 27 Oct 2023 19:08:41 +0100 [thread overview]
Message-ID: <20231027180850.1068089-16-joey.gouly@arm.com> (raw)
In-Reply-To: <20231027180850.1068089-1-joey.gouly@arm.com>
Add PKEY support to signals, by saving and restoring POR_EL0 from the stackframe.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
---
arch/arm64/include/uapi/asm/sigcontext.h | 7 ++++
arch/arm64/kernel/signal.c | 51 ++++++++++++++++++++++++
2 files changed, 58 insertions(+)
diff --git a/arch/arm64/include/uapi/asm/sigcontext.h b/arch/arm64/include/uapi/asm/sigcontext.h
index f23c1dc3f002..cef85eeaf541 100644
--- a/arch/arm64/include/uapi/asm/sigcontext.h
+++ b/arch/arm64/include/uapi/asm/sigcontext.h
@@ -98,6 +98,13 @@ struct esr_context {
__u64 esr;
};
+#define POE_MAGIC 0x504f4530
+
+struct poe_context {
+ struct _aarch64_ctx head;
+ __u64 por_el0;
+};
+
/*
* extra_context: describes extra space in the signal frame for
* additional structures that don't fit in sigcontext.__reserved[].
diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
index 0e8beb3349ea..379f364005bf 100644
--- a/arch/arm64/kernel/signal.c
+++ b/arch/arm64/kernel/signal.c
@@ -62,6 +62,7 @@ struct rt_sigframe_user_layout {
unsigned long zt_offset;
unsigned long extra_offset;
unsigned long end_offset;
+ unsigned long poe_offset;
};
#define BASE_SIGFRAME_SIZE round_up(sizeof(struct rt_sigframe), 16)
@@ -182,6 +183,8 @@ struct user_ctxs {
u32 za_size;
struct zt_context __user *zt;
u32 zt_size;
+ struct poe_context __user *poe;
+ u32 poe_size;
};
static int preserve_fpsimd_context(struct fpsimd_context __user *ctx)
@@ -227,6 +230,20 @@ static int restore_fpsimd_context(struct user_ctxs *user)
return err ? -EFAULT : 0;
}
+static int restore_poe_context(struct user_ctxs *user)
+{
+ u64 por_el0;
+ int err = 0;
+
+ if (user->poe_size != sizeof(*user->poe))
+ return -EINVAL;
+
+ __get_user_error(por_el0, &(user->poe->por_el0), err);
+ if (!err)
+ write_sysreg_s(por_el0, SYS_POR_EL0);
+
+ return err;
+}
#ifdef CONFIG_ARM64_SVE
@@ -590,6 +607,7 @@ static int parse_user_sigframe(struct user_ctxs *user,
user->tpidr2 = NULL;
user->za = NULL;
user->zt = NULL;
+ user->poe = NULL;
if (!IS_ALIGNED((unsigned long)base, 16))
goto invalid;
@@ -640,6 +658,17 @@ static int parse_user_sigframe(struct user_ctxs *user,
/* ignore */
break;
+ case POE_MAGIC:
+ if (!system_supports_poe())
+ goto invalid;
+
+ if (user->poe)
+ goto invalid;
+
+ user->poe = (struct poe_context __user *)head;
+ user->poe_size = size;
+ break;
+
case SVE_MAGIC:
if (!system_supports_sve() && !system_supports_sme())
goto invalid;
@@ -812,6 +841,9 @@ static int restore_sigframe(struct pt_regs *regs,
if (err == 0 && system_supports_sme2() && user.zt)
err = restore_zt_context(&user);
+ if (err == 0 && system_supports_poe() && user.poe)
+ err = restore_poe_context(&user);
+
return err;
}
@@ -928,6 +960,13 @@ static int setup_sigframe_layout(struct rt_sigframe_user_layout *user,
}
}
+ if (system_supports_poe()) {
+ err = sigframe_alloc(user, &user->poe_offset,
+ sizeof(struct poe_context));
+ if (err)
+ return err;
+ }
+
return sigframe_alloc_end(user);
}
@@ -968,6 +1007,15 @@ static int setup_sigframe(struct rt_sigframe_user_layout *user,
__put_user_error(current->thread.fault_code, &esr_ctx->esr, err);
}
+ if (system_supports_poe() && err == 0 && user->poe_offset) {
+ struct poe_context __user *poe_ctx =
+ apply_user_offset(user, user->poe_offset);
+
+ __put_user_error(POE_MAGIC, &poe_ctx->head.magic, err);
+ __put_user_error(sizeof(*poe_ctx), &poe_ctx->head.size, err);
+ __put_user_error(read_sysreg_s(SYS_POR_EL0), &poe_ctx->por_el0, err);
+ }
+
/* Scalable Vector Extension state (including streaming), if present */
if ((system_supports_sve() || system_supports_sme()) &&
err == 0 && user->sve_offset) {
@@ -1119,6 +1167,9 @@ static void setup_return(struct pt_regs *regs, struct k_sigaction *ka,
sme_smstop();
}
+ if (system_supports_poe())
+ write_sysreg_s(POR_EL0_INIT, SYS_POR_EL0);
+
if (ka->sa.sa_flags & SA_RESTORER)
sigtramp = ka->sa.sa_restorer;
else
--
2.25.1
next prev parent reply other threads:[~2023-10-27 18:09 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-27 18:08 [PATCH v2 00/20] Permission Overlay Extension Joey Gouly
2023-10-27 18:08 ` [PATCH v2 01/24] arm64/sysreg: add system register POR_EL{0,1} Joey Gouly
2023-10-27 18:08 ` [PATCH v2 02/24] arm64/sysreg: update CPACR_EL1 register Joey Gouly
2023-10-27 18:08 ` [PATCH v2 03/24] arm64: cpufeature: add Permission Overlay Extension cpucap Joey Gouly
2023-10-27 18:08 ` [PATCH v2 04/24] arm64: disable trapping of POR_EL0 to EL2 Joey Gouly
2023-10-27 18:08 ` [PATCH v2 05/24] arm64: context switch POR_EL0 register Joey Gouly
2023-10-27 18:08 ` [PATCH v2 06/24] KVM: arm64: Save/restore POE registers Joey Gouly
2023-10-27 18:08 ` [PATCH v2 07/24] arm64: enable the Permission Overlay Extension for EL0 Joey Gouly
2023-10-27 18:08 ` [PATCH v2 08/24] arm64: add POIndex defines Joey Gouly
2023-10-27 18:08 ` [PATCH v2 09/24] arm64: define VM_PKEY_BIT* for arm64 Joey Gouly
2023-10-27 18:08 ` [PATCH v2 10/24] arm64: mask out POIndex when modifying a PTE Joey Gouly
2023-10-27 18:08 ` [PATCH v2 11/24] arm64: enable ARCH_HAS_PKEYS on arm64 Joey Gouly
2023-10-27 18:08 ` [PATCH v2 12/24] arm64: handle PKEY/POE faults Joey Gouly
2023-10-27 18:08 ` [PATCH v2 13/24] arm64: stop using generic mm_hooks.h Joey Gouly
2023-10-27 18:08 ` [PATCH v2 14/24] arm64: implement PKEYS support Joey Gouly
2023-10-27 18:08 ` Joey Gouly [this message]
2023-10-30 19:10 ` [PATCH v2 15/24] arm64: add POE signal support Mark Brown
2023-10-27 18:08 ` [PATCH v2 16/24] arm64: enable PKEY support for CPUs with S1POE Joey Gouly
2023-10-27 18:08 ` [PATCH v2 17/24] arm64: enable POE and PIE to coexist Joey Gouly
2023-10-27 18:08 ` [PATCH v2 18/24] kselftest/arm64: move get_header() Joey Gouly
2023-10-27 18:08 ` [PATCH v2 19/24] selftests: mm: move fpregs printing Joey Gouly
2023-10-27 18:08 ` [PATCH v2 20/24] selftests: mm: make protection_keys test work on arm64 Joey Gouly
2023-10-27 18:08 ` [PATCH v2 21/24] kselftest/arm64: add HWCAP test for FEAT_S1POE Joey Gouly
2023-10-30 19:18 ` Mark Brown
2023-10-27 18:08 ` [PATCH v2 22/24] kselftest/arm64: parse POE_MAGIC in a signal frame Joey Gouly
2023-10-30 19:19 ` Mark Brown
2023-10-27 18:08 ` [PATCH v2 23/24] kselftest/arm64: Add test case for POR_EL0 signal frame records Joey Gouly
2023-10-27 18:08 ` [PATCH v2 24/24] KVM: selftests: get-reg-list: add Permission Overlay registers Joey Gouly
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231027180850.1068089-16-joey.gouly@arm.com \
--to=joey.gouly@arm.com \
--cc=akpm@linux-foundation.org \
--cc=aneesh.kumar@linux.ibm.com \
--cc=broonie@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=dave.hansen@linux.intel.com \
--cc=james.morse@arm.com \
--cc=kvmarm@lists.linux.dev \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kselftest@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=maz@kernel.org \
--cc=oliver.upton@linux.dev \
--cc=shuah@kernel.org \
--cc=suzuki.poulose@arm.com \
--cc=will@kernel.org \
--cc=yuzenghui@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox