linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Yajun Deng <yajun.deng@linux.dev>
To: akpm@linux-foundation.org, rppt@kernel.org
Cc: mike.kravetz@oracle.com, muchun.song@linux.dev,
	willy@infradead.org, david@redhat.com, linux-mm@kvack.org,
	linux-kernel@vger.kernel.org, Yajun Deng <yajun.deng@linux.dev>
Subject: [PATCH v4 2/2] mm: Init page count in reserve_bootmem_region when MEMINIT_EARLY
Date: Thu, 28 Sep 2023 16:33:02 +0800	[thread overview]
Message-ID: <20230928083302.386202-3-yajun.deng@linux.dev> (raw)
In-Reply-To: <20230928083302.386202-1-yajun.deng@linux.dev>

memmap_init_range() would init page count of all pages, but the free
pages count would be reset in __free_pages_core(). There are opposite
operations. It's unnecessary and time-consuming when it's MEMINIT_EARLY
context.

Init page count in reserve_bootmem_region when in MEMINIT_EARLY context,
and check the page count before reset it.

At the same time, the INIT_LIST_HEAD in reserve_bootmem_region isn't
need, as it already done in __init_single_page.

The following data was tested on an x86 machine with 190GB of RAM.

before:
free_low_memory_core_early()    341ms

after:
free_low_memory_core_early()    285ms

Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
---
v4: same with v2.
v3: same with v2.
v2: check page count instead of check context before reset it.
v1: https://lore.kernel.org/all/20230922070923.355656-1-yajun.deng@linux.dev/
---
 mm/mm_init.c    | 18 +++++++++++++-----
 mm/page_alloc.c | 20 ++++++++++++--------
 2 files changed, 25 insertions(+), 13 deletions(-)

diff --git a/mm/mm_init.c b/mm/mm_init.c
index 9716c8a7ade9..3ab8861e1ef3 100644
--- a/mm/mm_init.c
+++ b/mm/mm_init.c
@@ -718,7 +718,7 @@ static void __meminit init_reserved_page(unsigned long pfn, int nid)
 		if (zone_spans_pfn(zone, pfn))
 			break;
 	}
-	__init_single_page(pfn_to_page(pfn), pfn, zid, nid, INIT_PAGE_COUNT);
+	__init_single_page(pfn_to_page(pfn), pfn, zid, nid, 0);
 }
 #else
 static inline void pgdat_set_deferred_range(pg_data_t *pgdat) {}
@@ -756,8 +756,8 @@ void __meminit reserve_bootmem_region(phys_addr_t start,
 
 			init_reserved_page(start_pfn, nid);
 
-			/* Avoid false-positive PageTail() */
-			INIT_LIST_HEAD(&page->lru);
+			/* Init page count for reserved region */
+			init_page_count(page);
 
 			/*
 			 * no need for atomic set_bit because the struct
@@ -888,9 +888,17 @@ void __meminit memmap_init_range(unsigned long size, int nid, unsigned long zone
 		}
 
 		page = pfn_to_page(pfn);
-		__init_single_page(page, pfn, zone, nid, INIT_PAGE_COUNT);
-		if (context == MEMINIT_HOTPLUG)
+
+		/* If the context is MEMINIT_EARLY, we will init page count and
+		 * mark page reserved in reserve_bootmem_region, the free region
+		 * wouldn't have page count and we will check the pages count
+		 * in __free_pages_core.
+		 */
+		__init_single_page(page, pfn, zone, nid, 0);
+		if (context == MEMINIT_HOTPLUG) {
+			init_page_count(page);
 			__SetPageReserved(page);
+		}
 
 		/*
 		 * Usually, we want to mark the pageblock MIGRATE_MOVABLE,
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 06be8821d833..b868caabe8dc 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -1285,18 +1285,22 @@ void __free_pages_core(struct page *page, unsigned int order)
 	unsigned int loop;
 
 	/*
-	 * When initializing the memmap, __init_single_page() sets the refcount
-	 * of all pages to 1 ("allocated"/"not free"). We have to set the
-	 * refcount of all involved pages to 0.
+	 * When initializing the memmap, memmap_init_range sets the refcount
+	 * of all pages to 1 ("reserved" and "free") in hotplug context. We
+	 * have to set the refcount of all involved pages to 0. Otherwise,
+	 * we don't do it, as reserve_bootmem_region only set the refcount on
+	 * reserve region ("reserved") in early context.
 	 */
-	prefetchw(p);
-	for (loop = 0; loop < (nr_pages - 1); loop++, p++) {
-		prefetchw(p + 1);
+	if (page_count(page)) {
+		prefetchw(p);
+		for (loop = 0; loop < (nr_pages - 1); loop++, p++) {
+			prefetchw(p + 1);
+			__ClearPageReserved(p);
+			set_page_count(p, 0);
+		}
 		__ClearPageReserved(p);
 		set_page_count(p, 0);
 	}
-	__ClearPageReserved(p);
-	set_page_count(p, 0);
 
 	atomic_long_add(nr_pages, &page_zone(page)->managed_pages);
 
-- 
2.25.1



  parent reply	other threads:[~2023-09-28  8:33 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-09-28  8:33 [PATCH v4 0/2] mm: Don't set and reset page count in MEMINIT_EARLY Yajun Deng
2023-09-28  8:33 ` [PATCH v4 1/2] mm: pass page count and reserved to __init_single_page Yajun Deng
2023-09-29  8:19   ` Mike Rapoport
2023-09-29  9:37     ` Yajun Deng
2023-09-28  8:33 ` Yajun Deng [this message]
2023-09-29  8:30   ` [PATCH v4 2/2] mm: Init page count in reserve_bootmem_region when MEMINIT_EARLY Mike Rapoport
2023-09-29  9:50     ` Yajun Deng
2023-09-29 10:02       ` Mike Rapoport
2023-09-29 10:27         ` Yajun Deng
2023-10-01 18:59           ` Mike Rapoport
2023-10-02  7:03             ` Yajun Deng
2023-10-02  8:47               ` Mike Rapoport
2023-10-02  8:56                 ` David Hildenbrand
2023-10-02 11:10                   ` Mike Rapoport
2023-10-02 11:25                     ` David Hildenbrand
2023-10-03 14:38                       ` Yajun Deng
2023-10-05  5:06                         ` Mike Rapoport
2023-10-05 14:04                           ` Yajun Deng
2023-10-12  9:19                             ` Mike Rapoport
2023-10-12  9:36                               ` Yajun Deng
2023-10-02  8:30     ` David Hildenbrand
2023-10-08  8:57       ` Yajun Deng
2023-10-10  2:31         ` Yajun Deng
2023-10-12  9:23           ` David Hildenbrand
2023-10-12  9:53             ` Yajun Deng
2023-10-13  8:48               ` Mike Rapoport
2023-10-13  9:29                 ` Yajun Deng
2023-10-16  6:33                   ` Mike Rapoport
2023-10-16  8:10                     ` Yajun Deng
2023-10-16  8:16                       ` David Hildenbrand
2023-10-16  8:32                         ` Yajun Deng
2023-10-16  8:36                           ` David Hildenbrand
2023-10-16 10:17                             ` Yajun Deng
2023-10-17  9:58                               ` Yajun Deng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230928083302.386202-3-yajun.deng@linux.dev \
    --to=yajun.deng@linux.dev \
    --cc=akpm@linux-foundation.org \
    --cc=david@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mike.kravetz@oracle.com \
    --cc=muchun.song@linux.dev \
    --cc=rppt@kernel.org \
    --cc=willy@infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox