linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Liu Shixin <liushixin2@huawei.com>
To: Seth Jennings <sjenning@redhat.com>,
	Dan Streetman <ddstreet@ieee.org>,
	Vitaly Wool <vitaly.wool@konsulko.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	Nathan Chancellor <nathan@kernel.org>,
	Christoph Hellwig <hch@lst.de>
Cc: <linux-kernel@vger.kernel.org>, <linux-mm@kvack.org>,
	Liu Shixin <liushixin2@huawei.com>
Subject: [PATCH -next v7 4/4] mm/zswap: delay the initializaton of zswap
Date: Sat, 25 Mar 2023 15:14:20 +0800	[thread overview]
Message-ID: <20230325071420.2246461-5-liushixin2@huawei.com> (raw)
In-Reply-To: <20230325071420.2246461-1-liushixin2@huawei.com>

Since some users may not use zswap, the zswap_pool is wasted. Save memory
by delaying the initialization of zswap until enabled.

Signed-off-by: Liu Shixin <liushixin2@huawei.com>
---
 mm/zswap.c | 44 +++++++++++++++++++++++++++++++++++++-------
 1 file changed, 37 insertions(+), 7 deletions(-)

diff --git a/mm/zswap.c b/mm/zswap.c
index 9eda48c8b8dc..af98bd8d4b79 100644
--- a/mm/zswap.c
+++ b/mm/zswap.c
@@ -81,6 +81,8 @@ static bool zswap_pool_reached_full;
 
 #define ZSWAP_PARAM_UNSET ""
 
+static int zswap_setup(void);
+
 /* Enable/disable zswap */
 static bool zswap_enabled = IS_ENABLED(CONFIG_ZSWAP_DEFAULT_ON);
 static int zswap_enabled_param_set(const char *,
@@ -220,6 +222,9 @@ static atomic_t zswap_pools_count = ATOMIC_INIT(0);
 
 static int zswap_init_state;
 
+/* used to ensure the integrity of initialization */
+static DEFINE_MUTEX(zswap_init_lock);
+
 /* init completed, but couldn't create the initial pool */
 static bool zswap_has_pool;
 
@@ -652,7 +657,7 @@ static struct zswap_pool *zswap_pool_create(char *type, char *compressor)
 	return NULL;
 }
 
-static __init struct zswap_pool *__zswap_pool_create_fallback(void)
+static struct zswap_pool *__zswap_pool_create_fallback(void)
 {
 	bool has_comp, has_zpool;
 
@@ -765,16 +770,22 @@ static int __zswap_param_set(const char *val, const struct kernel_param *kp,
 	if (!strcmp(s, *(char **)kp->arg) && zswap_has_pool)
 		return 0;
 
+	mutex_lock(&zswap_init_lock);
 	if (zswap_init_state == ZSWAP_INIT_FAILED) {
 		pr_err("can't set param, initialization failed\n");
+		mutex_unlock(&zswap_init_lock);
 		return -ENODEV;
 	}
 
 	/* if this is load-time (pre-init) param setting,
 	 * don't create a pool; that's done during init.
 	 */
-	if (zswap_init_state == ZSWAP_UNINIT)
-		return param_set_charp(s, kp);
+	if (zswap_init_state == ZSWAP_UNINIT) {
+		ret = param_set_charp(s, kp);
+		mutex_unlock(&zswap_init_lock);
+		return ret;
+	}
+	mutex_unlock(&zswap_init_lock);
 
 	if (!type) {
 		if (!zpool_has_pool(s)) {
@@ -873,14 +884,23 @@ static int zswap_enabled_param_set(const char *val,
 	if (res == *(bool *)kp->arg)
 		return 0;
 
+	mutex_lock(&zswap_init_lock);
+	if (system_state == SYSTEM_RUNNING && zswap_setup()) {
+		mutex_unlock(&zswap_init_lock);
+		return -ENODEV;
+	}
+
 	if (zswap_init_state == ZSWAP_INIT_FAILED) {
 		pr_err("can't enable, initialization failed\n");
+		mutex_unlock(&zswap_init_lock);
 		return -ENODEV;
 	}
 	if (!zswap_has_pool && (zswap_init_state == ZSWAP_INIT_SUCCEED)) {
 		pr_err("can't enable, no pool configured\n");
+		mutex_unlock(&zswap_init_lock);
 		return -ENODEV;
 	}
+	mutex_unlock(&zswap_init_lock);
 
 	return param_set_bool(val, kp);
 }
@@ -1440,7 +1460,7 @@ static const struct frontswap_ops zswap_frontswap_ops = {
 
 static struct dentry *zswap_debugfs_root;
 
-static int __init zswap_debugfs_init(void)
+static int zswap_debugfs_init(void)
 {
 	if (!debugfs_initialized())
 		return -ENODEV;
@@ -1471,7 +1491,7 @@ static int __init zswap_debugfs_init(void)
 	return 0;
 }
 #else
-static int __init zswap_debugfs_init(void)
+static int zswap_debugfs_init(void)
 {
 	return 0;
 }
@@ -1480,11 +1500,14 @@ static int __init zswap_debugfs_init(void)
 /*********************************
 * module init and exit
 **********************************/
-static int __init init_zswap(void)
+static int zswap_setup(void)
 {
 	struct zswap_pool *pool;
 	int ret;
 
+	if (zswap_init_state != ZSWAP_UNINIT)
+		return 0;
+
 	zswap_entry_cache = KMEM_CACHE(zswap_entry, 0);
 	if (!zswap_entry_cache) {
 		pr_err("entry cache creation failed\n");
@@ -1543,8 +1566,15 @@ static int __init init_zswap(void)
 	zswap_enabled = false;
 	return -ENOMEM;
 }
+
+static int __init zswap_init(void)
+{
+	if (!zswap_enabled)
+		return 0;
+	return zswap_setup();
+}
 /* must be late so crypto has time to come up */
-late_initcall(init_zswap);
+late_initcall(zswap_init);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Seth Jennings <sjennings@variantweb.net>");
-- 
2.25.1



  parent reply	other threads:[~2023-03-25  6:24 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-25  7:14 [PATCH -next v7 0/4] Delay the initialization " Liu Shixin
2023-03-25  7:14 ` [PATCH -next v7 1/4] mm/zswap: remove zswap_entry_cache_{create,destroy} helper function Liu Shixin
2023-03-26 23:19   ` Christoph Hellwig
2023-03-25  7:14 ` [PATCH -next v7 2/4] mm/zswap: skip invalid or unchanged parameter Liu Shixin
2023-03-26  3:08   ` Sergey Senozhatsky
2023-03-26  3:17   ` Sergey Senozhatsky
2023-03-26  4:53     ` Sergey Senozhatsky
2023-03-26 23:25       ` Christoph Hellwig
2023-03-27  1:22         ` Liu Shixin
2023-03-25  7:14 ` [PATCH -next v7 3/4] mm/zswap: replace zswap_init_{started/failed} with zswap_init_state Liu Shixin
2023-03-26 23:26   ` Christoph Hellwig
2023-03-25  7:14 ` Liu Shixin [this message]
2023-03-26 23:29   ` [PATCH -next v7 4/4] mm/zswap: delay the initializaton of zswap Christoph Hellwig

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230325071420.2246461-5-liushixin2@huawei.com \
    --to=liushixin2@huawei.com \
    --cc=akpm@linux-foundation.org \
    --cc=ddstreet@ieee.org \
    --cc=hch@lst.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=nathan@kernel.org \
    --cc=sjenning@redhat.com \
    --cc=vitaly.wool@konsulko.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox