From: Mike Rapoport <rppt@kernel.org>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: David Hildenbrand <david@redhat.com>,
Doug Berger <opendmb@gmail.com>,
Matthew Wilcox <willy@infradead.org>,
Mel Gorman <mgorman@suse.de>, Michal Hocko <mhocko@kernel.org>,
Mike Rapoport <rppt@kernel.org>,
Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
Vlastimil Babka <vbabka@suse.cz>,
linux-kernel@vger.kernel.org, linux-mips@vger.kernel.org,
linux-mm@kvack.org
Subject: [PATCH v2 11/14] mm: move mem_init_print_info() to mm_init.c
Date: Tue, 21 Mar 2023 19:05:10 +0200 [thread overview]
Message-ID: <20230321170513.2401534-12-rppt@kernel.org> (raw)
In-Reply-To: <20230321170513.2401534-1-rppt@kernel.org>
From: "Mike Rapoport (IBM)" <rppt@kernel.org>
mem_init_print_info() is only called from mm_core_init().
Move it close to the caller and make it static.
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
---
include/linux/mm.h | 1 -
mm/internal.h | 1 +
mm/mm_init.c | 53 ++++++++++++++++++++++++++++++++++++++++++++++
mm/page_alloc.c | 53 ----------------------------------------------
4 files changed, 54 insertions(+), 54 deletions(-)
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 2fecabb1a328..e249208f8fbe 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -2925,7 +2925,6 @@ extern unsigned long free_reserved_area(void *start, void *end,
int poison, const char *s);
extern void adjust_managed_page_count(struct page *page, long count);
-extern void mem_init_print_info(void);
extern void reserve_bootmem_region(phys_addr_t start, phys_addr_t end);
diff --git a/mm/internal.h b/mm/internal.h
index 4750e3a7fd0d..02273c5e971f 100644
--- a/mm/internal.h
+++ b/mm/internal.h
@@ -201,6 +201,7 @@ pmd_t *mm_find_pmd(struct mm_struct *mm, unsigned long address);
/*
* in mm/page_alloc.c
*/
+#define K(x) ((x) << (PAGE_SHIFT-10))
extern char * const zone_names[MAX_NR_ZONES];
diff --git a/mm/mm_init.c b/mm/mm_init.c
index ff70da11e797..8adadf51bbd2 100644
--- a/mm/mm_init.c
+++ b/mm/mm_init.c
@@ -24,6 +24,8 @@
#include <linux/page_ext.h>
#include <linux/pti.h>
#include <linux/pgtable.h>
+#include <linux/swap.h>
+#include <linux/cma.h>
#include "internal.h"
#include "shuffle.h"
@@ -2649,6 +2651,57 @@ static void __init report_meminit(void)
pr_info("mem auto-init: clearing system memory may take some time...\n");
}
+static void __init mem_init_print_info(void)
+{
+ unsigned long physpages, codesize, datasize, rosize, bss_size;
+ unsigned long init_code_size, init_data_size;
+
+ physpages = get_num_physpages();
+ codesize = _etext - _stext;
+ datasize = _edata - _sdata;
+ rosize = __end_rodata - __start_rodata;
+ bss_size = __bss_stop - __bss_start;
+ init_data_size = __init_end - __init_begin;
+ init_code_size = _einittext - _sinittext;
+
+ /*
+ * Detect special cases and adjust section sizes accordingly:
+ * 1) .init.* may be embedded into .data sections
+ * 2) .init.text.* may be out of [__init_begin, __init_end],
+ * please refer to arch/tile/kernel/vmlinux.lds.S.
+ * 3) .rodata.* may be embedded into .text or .data sections.
+ */
+#define adj_init_size(start, end, size, pos, adj) \
+ do { \
+ if (&start[0] <= &pos[0] && &pos[0] < &end[0] && size > adj) \
+ size -= adj; \
+ } while (0)
+
+ adj_init_size(__init_begin, __init_end, init_data_size,
+ _sinittext, init_code_size);
+ adj_init_size(_stext, _etext, codesize, _sinittext, init_code_size);
+ adj_init_size(_sdata, _edata, datasize, __init_begin, init_data_size);
+ adj_init_size(_stext, _etext, codesize, __start_rodata, rosize);
+ adj_init_size(_sdata, _edata, datasize, __start_rodata, rosize);
+
+#undef adj_init_size
+
+ pr_info("Memory: %luK/%luK available (%luK kernel code, %luK rwdata, %luK rodata, %luK init, %luK bss, %luK reserved, %luK cma-reserved"
+#ifdef CONFIG_HIGHMEM
+ ", %luK highmem"
+#endif
+ ")\n",
+ K(nr_free_pages()), K(physpages),
+ codesize / SZ_1K, datasize / SZ_1K, rosize / SZ_1K,
+ (init_data_size + init_code_size) / SZ_1K, bss_size / SZ_1K,
+ K(physpages - totalram_pages() - totalcma_pages),
+ K(totalcma_pages)
+#ifdef CONFIG_HIGHMEM
+ , K(totalhigh_pages())
+#endif
+ );
+}
+
/*
* Set up kernel memory allocators
*/
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 2f333c26170c..bb0099f7da93 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -5239,8 +5239,6 @@ static bool show_mem_node_skip(unsigned int flags, int nid, nodemask_t *nodemask
return !node_isset(nid, *nodemask);
}
-#define K(x) ((x) << (PAGE_SHIFT-10))
-
static void show_migration_types(unsigned char type)
{
static const char types[MIGRATE_TYPES] = {
@@ -6200,57 +6198,6 @@ unsigned long free_reserved_area(void *start, void *end, int poison, const char
return pages;
}
-void __init mem_init_print_info(void)
-{
- unsigned long physpages, codesize, datasize, rosize, bss_size;
- unsigned long init_code_size, init_data_size;
-
- physpages = get_num_physpages();
- codesize = _etext - _stext;
- datasize = _edata - _sdata;
- rosize = __end_rodata - __start_rodata;
- bss_size = __bss_stop - __bss_start;
- init_data_size = __init_end - __init_begin;
- init_code_size = _einittext - _sinittext;
-
- /*
- * Detect special cases and adjust section sizes accordingly:
- * 1) .init.* may be embedded into .data sections
- * 2) .init.text.* may be out of [__init_begin, __init_end],
- * please refer to arch/tile/kernel/vmlinux.lds.S.
- * 3) .rodata.* may be embedded into .text or .data sections.
- */
-#define adj_init_size(start, end, size, pos, adj) \
- do { \
- if (&start[0] <= &pos[0] && &pos[0] < &end[0] && size > adj) \
- size -= adj; \
- } while (0)
-
- adj_init_size(__init_begin, __init_end, init_data_size,
- _sinittext, init_code_size);
- adj_init_size(_stext, _etext, codesize, _sinittext, init_code_size);
- adj_init_size(_sdata, _edata, datasize, __init_begin, init_data_size);
- adj_init_size(_stext, _etext, codesize, __start_rodata, rosize);
- adj_init_size(_sdata, _edata, datasize, __start_rodata, rosize);
-
-#undef adj_init_size
-
- pr_info("Memory: %luK/%luK available (%luK kernel code, %luK rwdata, %luK rodata, %luK init, %luK bss, %luK reserved, %luK cma-reserved"
-#ifdef CONFIG_HIGHMEM
- ", %luK highmem"
-#endif
- ")\n",
- K(nr_free_pages()), K(physpages),
- codesize / SZ_1K, datasize / SZ_1K, rosize / SZ_1K,
- (init_data_size + init_code_size) / SZ_1K, bss_size / SZ_1K,
- K(physpages - totalram_pages() - totalcma_pages),
- K(totalcma_pages)
-#ifdef CONFIG_HIGHMEM
- , K(totalhigh_pages())
-#endif
- );
-}
-
static int page_alloc_cpu_dead(unsigned int cpu)
{
struct zone *zone;
--
2.35.1
next prev parent reply other threads:[~2023-03-21 17:06 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-21 17:04 [PATCH v2 00/14] mm: move core MM initialization to mm/mm_init.c Mike Rapoport
2023-03-21 17:05 ` [PATCH v2 01/14] mips: fix comment about pgtable_init() Mike Rapoport
2023-03-22 11:36 ` Vlastimil Babka
2023-03-21 17:05 ` [PATCH v2 02/14] mm/page_alloc: add helper for checking if check_pages_enabled Mike Rapoport
2023-03-22 11:38 ` Vlastimil Babka
2023-03-21 17:05 ` [PATCH v2 03/14] mm: move most of core MM initialization to mm/mm_init.c Mike Rapoport
2023-03-22 14:26 ` Vlastimil Babka
2023-03-21 17:05 ` [PATCH v2 04/14] mm: handle hashdist initialization in mm/mm_init.c Mike Rapoport
2023-03-22 14:49 ` Vlastimil Babka
2023-03-22 15:00 ` Mike Rapoport
2023-03-21 17:05 ` [PATCH v2 05/14] mm/page_alloc: rename page_alloc_init() to page_alloc_init_cpuhp() Mike Rapoport
2023-03-22 14:50 ` Vlastimil Babka
2023-03-21 17:05 ` [PATCH v2 06/14] init: fold build_all_zonelists() and page_alloc_init_cpuhp() to mm_init() Mike Rapoport
2023-03-22 16:10 ` Vlastimil Babka
2023-03-22 20:26 ` Mike Rapoport
2023-03-23 7:09 ` Vlastimil Babka
2023-03-21 17:05 ` [PATCH v2 07/14] init,mm: move mm_init() to mm/mm_init.c and rename it to mm_core_init() Mike Rapoport
2023-03-22 16:24 ` Vlastimil Babka
2023-03-21 17:05 ` [PATCH v2 08/14] mm: call {ptlock,pgtable}_cache_init() directly from mm_core_init() Mike Rapoport
[not found] ` <ff403707-a61b-8b87-4d8d-5aecaa574be3@gmail.com>
2023-03-22 10:08 ` Mike Rapoport
2023-03-22 11:18 ` David Hildenbrand
2023-03-22 16:27 ` Vlastimil Babka
2023-03-21 17:05 ` [PATCH v2 09/14] mm: move init_mem_debugging_and_hardening() to mm/mm_init.c Mike Rapoport
2023-03-22 16:28 ` Vlastimil Babka
2023-03-21 17:05 ` [PATCH v2 10/14] init,mm: fold late call to page_ext_init() to page_alloc_init_late() Mike Rapoport
2023-03-22 16:30 ` Vlastimil Babka
2023-03-21 17:05 ` Mike Rapoport [this message]
2023-03-22 16:32 ` [PATCH v2 11/14] mm: move mem_init_print_info() to mm_init.c Vlastimil Babka
2023-03-21 17:05 ` [PATCH v2 12/14] mm: move kmem_cache_init() declaration to mm/slab.h Mike Rapoport
2023-03-22 16:33 ` Vlastimil Babka
2023-03-21 17:05 ` [PATCH v2 13/14] mm: move vmalloc_init() declaration to mm/internal.h Mike Rapoport
2023-03-22 16:33 ` Vlastimil Babka
2023-03-21 17:05 ` [PATCH v2 14/14] MAINTAINERS: extend memblock entry to include MM initialization Mike Rapoport
2023-03-22 16:34 ` Vlastimil Babka
2023-03-22 11:19 ` [PATCH v2 00/14] mm: move core MM initialization to mm/mm_init.c David Hildenbrand
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230321170513.2401534-12-rppt@kernel.org \
--to=rppt@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=david@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mgorman@suse.de \
--cc=mhocko@kernel.org \
--cc=opendmb@gmail.com \
--cc=tsbogend@alpha.franken.de \
--cc=vbabka@suse.cz \
--cc=willy@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox