linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Jaewon Kim <jaewon31.kim@samsung.com>
To: Jaewon Kim <jaewon31.kim@samsung.com>,
	"jstultz@google.com" <jstultz@google.com>,
	"tjmercier@google.com" <tjmercier@google.com>,
	"sumit.semwal@linaro.org" <sumit.semwal@linaro.org>,
	"daniel.vetter@ffwll.ch" <daniel.vetter@ffwll.ch>,
	"akpm@linux-foundation.org" <akpm@linux-foundation.org>,
	"hannes@cmpxchg.org" <hannes@cmpxchg.org>,
	"mhocko@kernel.org" <mhocko@kernel.org>
Cc: "linux-mm@kvack.org" <linux-mm@kvack.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"jaewon31.kim@gmail.com" <jaewon31.kim@gmail.com>
Subject: Re: [PATCH v2] dma-buf: system_heap: avoid reclaim for order 4
Date: Fri, 10 Feb 2023 14:03:33 +0900	[thread overview]
Message-ID: <20230210050333epcms1p7c0bd93b385828aeed9689d1d17ff6789@epcms1p7> (raw)
In-Reply-To: <20230210045608.23274-1-jaewon31.kim@samsung.com>

>Using order 4 pages would be helpful for IOMMUs mapping, but trying to get order 4 pages could spend quite much time in the page allocation.
>From the perspective of responsiveness, the deterministic memory allocation speed, I think, is quite important.
>
>The order 4 allocation with __GFP_RECLAIM may spend much time in reclaim and compation logic. __GFP_NORETRY also may affect. These cause unpredictable delay.
>
>To get reasonable allocation speed from dma-buf system heap, use HIGH_ORDER_GFP for order 4 to avoid reclaim. And let me remove meaningless __GFP_COMP for order 0.
>
>According to my tests, order 4 with MID_ORDER_GFP could get more number of order 4 pages but the elapsed times could be very slow.
>
>         time	order 8	order 4	order 0
>     584 usec	0	160	0
>  28,428 usec	0	160	0
> 100,701 usec	0	160	0
>  76,645 usec	0	160	0
>  25,522 usec	0	160	0
>  38,798 usec	0	160	0
>  89,012 usec	0	160	0
>  23,015 usec	0	160	0
>  73,360 usec	0	160	0
>  76,953 usec	0	160	0
>  31,492 usec	0	160	0
>  75,889 usec	0	160	0
>  84,551 usec	0	160	0
>  84,352 usec	0	160	0
>  57,103 usec	0	160	0
>  93,452 usec	0	160	0
>
>If HIGH_ORDER_GFP is used for order 4, the number of order 4 could be decreased but the elapsed time results were quite stable and fast enough.
>
>         time	order 8	order 4	order 0
>   1,356 usec	0	155	80
>   1,901 usec	0	11	2384
>   1,912 usec	0	0	2560
>   1,911 usec	0	0	2560
>   1,884 usec	0	0	2560
>   1,577 usec	0	0	2560
>   1,366 usec	0	0	2560
>   1,711 usec	0	0	2560
>   1,635 usec	0	28	2112
>     544 usec	10	0	0
>     633 usec	2	128	0
>     848 usec	0	160	0
>     729 usec	0	160	0
>   1,000 usec	0	160	0
>   1,358 usec	0	160	0
>   2,638 usec	0	31	2064
>
>Signed-off-by: Jaewon Kim <jaewon31.kim@samsung.com>
>---
> drivers/dma-buf/heaps/system_heap.c | 5 ++---
> 1 file changed, 2 insertions(+), 3 deletions(-)
>
>diff --git a/drivers/dma-buf/heaps/system_heap.c b/drivers/dma-buf/heaps/system_heap.c
>index e8bd10e60998..920db302a273 100644
>--- a/drivers/dma-buf/heaps/system_heap.c
>+++ b/drivers/dma-buf/heaps/system_heap.c
>@@ -41,12 +41,11 @@ struct dma_heap_attachment {
> 	bool mapped;
> };
> 
>-#define LOW_ORDER_GFP (GFP_HIGHUSER | __GFP_ZERO | __GFP_COMP) -#define MID_ORDER_GFP (LOW_ORDER_GFP | __GFP_NOWARN)
>+#define LOW_ORDER_GFP (GFP_HIGHUSER | __GFP_ZERO)
> #define HIGH_ORDER_GFP  (((GFP_HIGHUSER | __GFP_ZERO | __GFP_NOWARN \
> 				| __GFP_NORETRY) & ~__GFP_RECLAIM) \
> 				| __GFP_COMP)
>-static gfp_t order_flags[] = {HIGH_ORDER_GFP, MID_ORDER_GFP, LOW_ORDER_GFP};
>+static gfp_t order_flags[] = {HIGH_ORDER_GFP, HIGH_ORDER_GFP, 
>+LOW_ORDER_GFP};
> /*
>  * The selection of the orders used for allocation (1MB, 64K, 4K) is designed
>  * to match with the sizes often found in IOMMUs. Using order 4 pages instead
>--
>2.17.1
>
>

added John Stultz <jstultz@google.com>


  parent reply	other threads:[~2023-02-10  5:03 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20230210045651epcas1p1392354722c8ad6d4ffad6f934ba78742@epcas1p1.samsung.com>
2023-02-10  4:56 ` Jaewon Kim
     [not found]   ` <CGME20230210045651epcas1p1392354722c8ad6d4ffad6f934ba78742@epcms1p7>
2023-02-10  5:03     ` Jaewon Kim [this message]
2023-02-14 22:25       ` John Stultz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230210050333epcms1p7c0bd93b385828aeed9689d1d17ff6789@epcms1p7 \
    --to=jaewon31.kim@samsung.com \
    --cc=akpm@linux-foundation.org \
    --cc=daniel.vetter@ffwll.ch \
    --cc=hannes@cmpxchg.org \
    --cc=jaewon31.kim@gmail.com \
    --cc=jstultz@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mhocko@kernel.org \
    --cc=sumit.semwal@linaro.org \
    --cc=tjmercier@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox