From: Christoph Hellwig <hch@lst.de>
To: Andrew Morton <akpm@linux-foundation.org>,
"Theodore Ts'o" <tytso@mit.edu>, Jan Kara <jack@suse.com>,
Konstantin Komarov <almaz.alexandrovich@paragon-software.com>,
Mark Fasheh <mark@fasheh.com>, Joel Becker <jlbec@evilplan.org>,
Joseph Qi <joseph.qi@linux.alibaba.com>,
"Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: linux-ext4@vger.kernel.org, linux-fsdevel@vger.kernel.org,
ntfs3@lists.linux.dev, ocfs2-devel@oss.oracle.com,
linux-mm@kvack.org
Subject: [PATCH 4/6] jbd2,ocfs2: move jbd2_journal_submit_inode_data_buffers to ocfs2
Date: Thu, 29 Dec 2022 06:10:29 -1000 [thread overview]
Message-ID: <20221229161031.391878-5-hch@lst.de> (raw)
In-Reply-To: <20221229161031.391878-1-hch@lst.de>
jbd2_journal_submit_inode_data_buffers is only used by ocfs2, so move
it there to prepare for removing generic_writepages.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
fs/jbd2/commit.c | 25 -------------------------
fs/jbd2/journal.c | 1 -
fs/ocfs2/journal.c | 16 +++++++++++++++-
include/linux/jbd2.h | 2 --
4 files changed, 15 insertions(+), 29 deletions(-)
diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c
index 4810438b7856aa..aeee6b8a6da218 100644
--- a/fs/jbd2/commit.c
+++ b/fs/jbd2/commit.c
@@ -181,31 +181,6 @@ static int journal_wait_on_commit_record(journal_t *journal,
return ret;
}
-/*
- * write the filemap data using writepage() address_space_operations.
- * We don't do block allocation here even for delalloc. We don't
- * use writepages() because with delayed allocation we may be doing
- * block allocation in writepages().
- */
-int jbd2_journal_submit_inode_data_buffers(struct jbd2_inode *jinode)
-{
- struct address_space *mapping = jinode->i_vfs_inode->i_mapping;
- struct writeback_control wbc = {
- .sync_mode = WB_SYNC_ALL,
- .nr_to_write = mapping->nrpages * 2,
- .range_start = jinode->i_dirty_start,
- .range_end = jinode->i_dirty_end,
- };
-
- /*
- * submit the inode data buffers. We use writepage
- * instead of writepages. Because writepages can do
- * block allocation with delalloc. We need to write
- * only allocated blocks here.
- */
- return generic_writepages(mapping, &wbc);
-}
-
/* Send all the data buffers related to an inode */
int jbd2_submit_inode_data(journal_t *journal, struct jbd2_inode *jinode)
{
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index 2696f43e7239f8..d331f6ece20a28 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -89,7 +89,6 @@ EXPORT_SYMBOL(jbd2_journal_try_to_free_buffers);
EXPORT_SYMBOL(jbd2_journal_force_commit);
EXPORT_SYMBOL(jbd2_journal_inode_ranged_write);
EXPORT_SYMBOL(jbd2_journal_inode_ranged_wait);
-EXPORT_SYMBOL(jbd2_journal_submit_inode_data_buffers);
EXPORT_SYMBOL(jbd2_journal_finish_inode_data_buffers);
EXPORT_SYMBOL(jbd2_journal_init_jbd_inode);
EXPORT_SYMBOL(jbd2_journal_release_jbd_inode);
diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c
index 3fb98b4569a28b..59f612684c5178 100644
--- a/fs/ocfs2/journal.c
+++ b/fs/ocfs2/journal.c
@@ -15,6 +15,7 @@
#include <linux/time.h>
#include <linux/random.h>
#include <linux/delay.h>
+#include <linux/writeback.h>
#include <cluster/masklog.h>
@@ -841,6 +842,19 @@ int ocfs2_journal_alloc(struct ocfs2_super *osb)
return status;
}
+static int ocfs2_journal_submit_inode_data_buffers(struct jbd2_inode *jinode)
+{
+ struct address_space *mapping = jinode->i_vfs_inode->i_mapping;
+ struct writeback_control wbc = {
+ .sync_mode = WB_SYNC_ALL,
+ .nr_to_write = mapping->nrpages * 2,
+ .range_start = jinode->i_dirty_start,
+ .range_end = jinode->i_dirty_end,
+ };
+
+ return generic_writepages(mapping, &wbc);
+}
+
int ocfs2_journal_init(struct ocfs2_super *osb, int *dirty)
{
int status = -1;
@@ -910,7 +924,7 @@ int ocfs2_journal_init(struct ocfs2_super *osb, int *dirty)
journal->j_journal = j_journal;
journal->j_journal->j_submit_inode_data_buffers =
- jbd2_journal_submit_inode_data_buffers;
+ ocfs2_journal_submit_inode_data_buffers;
journal->j_journal->j_finish_inode_data_buffers =
jbd2_journal_finish_inode_data_buffers;
journal->j_inode = inode;
diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h
index 2170e0cc279d5c..5962072a4b19e6 100644
--- a/include/linux/jbd2.h
+++ b/include/linux/jbd2.h
@@ -1570,8 +1570,6 @@ extern int jbd2_journal_inode_ranged_write(handle_t *handle,
extern int jbd2_journal_inode_ranged_wait(handle_t *handle,
struct jbd2_inode *inode, loff_t start_byte,
loff_t length);
-extern int jbd2_journal_submit_inode_data_buffers(
- struct jbd2_inode *jinode);
extern int jbd2_journal_finish_inode_data_buffers(
struct jbd2_inode *jinode);
extern int jbd2_journal_begin_ordered_truncate(journal_t *journal,
--
2.35.1
next prev parent reply other threads:[~2022-12-29 16:11 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-29 16:10 remove generic_writepages Christoph Hellwig
2022-12-29 16:10 ` [PATCH 1/6] fs: remove an outdated comment on mpage_writepages Christoph Hellwig
2023-01-02 12:13 ` Jan Kara
2022-12-29 16:10 ` [PATCH 2/6] ntfs3: stop using generic_writepages Christoph Hellwig
2022-12-29 16:10 ` [PATCH 3/6] ntfs3: remove ->writepage Christoph Hellwig
2022-12-29 16:10 ` Christoph Hellwig [this message]
2022-12-29 16:10 ` [PATCH 5/6] ocfs2: use filemap_fdatawrite_wbc instead of generic_writepages Christoph Hellwig
2023-01-02 12:15 ` Jan Kara
2022-12-29 16:10 ` [PATCH 6/6] mm: remove generic_writepages Christoph Hellwig
2023-01-02 12:16 ` Jan Kara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221229161031.391878-5-hch@lst.de \
--to=hch@lst.de \
--cc=akpm@linux-foundation.org \
--cc=almaz.alexandrovich@paragon-software.com \
--cc=jack@suse.com \
--cc=jlbec@evilplan.org \
--cc=joseph.qi@linux.alibaba.com \
--cc=linux-ext4@vger.kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mark@fasheh.com \
--cc=ntfs3@lists.linux.dev \
--cc=ocfs2-devel@oss.oracle.com \
--cc=tytso@mit.edu \
--cc=willy@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox