linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Logan Gunthorpe <logang@deltatee.com>
To: linux-kernel@vger.kernel.org, linux-nvme@lists.infradead.org,
	linux-block@vger.kernel.org, linux-pci@vger.kernel.org,
	linux-mm@kvack.org, iommu@lists.linux-foundation.org,
	iommu@lists.linux.dev
Cc: "Stephen Bates" <sbates@raithlin.com>,
	"Christoph Hellwig" <hch@lst.de>,
	"Dan Williams" <dan.j.williams@intel.com>,
	"Jason Gunthorpe" <jgg@ziepe.ca>,
	"Christian König" <christian.koenig@amd.com>,
	"John Hubbard" <jhubbard@nvidia.com>,
	"Don Dutile" <ddutile@redhat.com>,
	"Matthew Wilcox" <willy@infradead.org>,
	"Daniel Vetter" <daniel.vetter@ffwll.ch>,
	"Minturn Dave B" <dave.b.minturn@intel.com>,
	"Jason Ekstrand" <jason@jlekstrand.net>,
	"Dave Hansen" <dave.hansen@linux.intel.com>,
	"Xiong Jianxin" <jianxin.xiong@intel.com>,
	"Bjorn Helgaas" <helgaas@kernel.org>,
	"Ira Weiny" <ira.weiny@intel.com>,
	"Robin Murphy" <robin.murphy@arm.com>,
	"Martin Oliveira" <martin.oliveira@eideticom.com>,
	"Chaitanya Kulkarni" <ckulkarnilinux@gmail.com>,
	"Ralph Campbell" <rcampbell@nvidia.com>,
	"Logan Gunthorpe" <logang@deltatee.com>,
	"Bjorn Helgaas" <bhelgaas@google.com>
Subject: [PATCH v8 03/13] PCI/P2PDMA: Introduce helpers for dma_map_sg implementations
Date: Fri,  8 Jul 2022 10:50:54 -0600	[thread overview]
Message-ID: <20220708165104.5005-4-logang@deltatee.com> (raw)
In-Reply-To: <20220708165104.5005-1-logang@deltatee.com>

Add pci_p2pdma_map_segment() as a helper for dma_map_sg()
implementations. It takes an scatterlist segment that must point to a
pci_p2pdma struct page and will map it if the mapping requires a bus
address.

The return value indicates whether the mapping required a bus address
or whether the caller still needs to map the segment normally. If the
segment should not be mapped, -EREMOTEIO is returned.

This helper uses a state structure to track the changes to the
pgmap across calls and avoid needing to lookup into the xarray for
every page.

The prototype for the helper is added to dma-map-ops.h as it is only
useful to dma map implementations and don't need to pollute the public
pci-p2pdma header.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
---
 drivers/pci/p2pdma.c        | 44 +++++++++++++++++++++++++-----
 include/linux/dma-map-ops.h | 53 +++++++++++++++++++++++++++++++++++++
 2 files changed, 90 insertions(+), 7 deletions(-)

diff --git a/drivers/pci/p2pdma.c b/drivers/pci/p2pdma.c
index 4e8bc457e29a..5d2538aa0778 100644
--- a/drivers/pci/p2pdma.c
+++ b/drivers/pci/p2pdma.c
@@ -10,6 +10,7 @@
 
 #define pr_fmt(fmt) "pci-p2pdma: " fmt
 #include <linux/ctype.h>
+#include <linux/dma-map-ops.h>
 #include <linux/pci-p2pdma.h>
 #include <linux/module.h>
 #include <linux/slab.h>
@@ -20,13 +21,6 @@
 #include <linux/seq_buf.h>
 #include <linux/xarray.h>
 
-enum pci_p2pdma_map_type {
-	PCI_P2PDMA_MAP_UNKNOWN = 0,
-	PCI_P2PDMA_MAP_NOT_SUPPORTED,
-	PCI_P2PDMA_MAP_BUS_ADDR,
-	PCI_P2PDMA_MAP_THRU_HOST_BRIDGE,
-};
-
 struct pci_p2pdma {
 	struct gen_pool *pool;
 	bool p2pmem_published;
@@ -944,6 +938,42 @@ void pci_p2pdma_unmap_sg_attrs(struct device *dev, struct scatterlist *sg,
 }
 EXPORT_SYMBOL_GPL(pci_p2pdma_unmap_sg_attrs);
 
+/**
+ * pci_p2pdma_map_segment - map an sg segment determining the mapping type
+ * @state: State structure that should be declared outside of the for_each_sg()
+ *	loop and initialized to zero.
+ * @dev: DMA device that's doing the mapping operation
+ * @sg: scatterlist segment to map
+ *
+ * This is a helper to be used by non-IOMMU dma_map_sg() implementations where
+ * the sg segment is the same for the page_link and the dma_address.
+ *
+ * Attempt to map a single segment in an SGL with the PCI bus address.
+ * The segment must point to a PCI P2PDMA page and thus must be
+ * wrapped in a is_pci_p2pdma_page(sg_page(sg)) check.
+ *
+ * Returns the type of mapping used and maps the page if the type is
+ * PCI_P2PDMA_MAP_BUS_ADDR.
+ */
+enum pci_p2pdma_map_type
+pci_p2pdma_map_segment(struct pci_p2pdma_map_state *state, struct device *dev,
+		       struct scatterlist *sg)
+{
+	if (state->pgmap != sg_page(sg)->pgmap) {
+		state->pgmap = sg_page(sg)->pgmap;
+		state->map = pci_p2pdma_map_type(state->pgmap, dev);
+		state->bus_off = to_p2p_pgmap(state->pgmap)->bus_offset;
+	}
+
+	if (state->map == PCI_P2PDMA_MAP_BUS_ADDR) {
+		sg->dma_address = sg_phys(sg) + state->bus_off;
+		sg_dma_len(sg) = sg->length;
+		sg_dma_mark_bus_address(sg);
+	}
+
+	return state->map;
+}
+
 /**
  * pci_p2pdma_enable_store - parse a configfs/sysfs attribute store
  *		to enable p2pdma
diff --git a/include/linux/dma-map-ops.h b/include/linux/dma-map-ops.h
index 0d5b06b3a4a6..df27ee3c9afc 100644
--- a/include/linux/dma-map-ops.h
+++ b/include/linux/dma-map-ops.h
@@ -379,4 +379,57 @@ static inline void debug_dma_dump_mappings(struct device *dev)
 
 extern const struct dma_map_ops dma_dummy_ops;
 
+enum pci_p2pdma_map_type {
+	/*
+	 * PCI_P2PDMA_MAP_UNKNOWN: Used internally for indicating the mapping
+	 * type hasn't been calculated yet. Functions that return this enum
+	 * never return this value.
+	 */
+	PCI_P2PDMA_MAP_UNKNOWN = 0,
+
+	/*
+	 * PCI_P2PDMA_MAP_NOT_SUPPORTED: Indicates the transaction will
+	 * traverse the host bridge and the host bridge is not in the
+	 * allowlist. DMA Mapping routines should return an error when
+	 * this is returned.
+	 */
+	PCI_P2PDMA_MAP_NOT_SUPPORTED,
+
+	/*
+	 * PCI_P2PDMA_BUS_ADDR: Indicates that two devices can talk to
+	 * each other directly through a PCI switch and the transaction will
+	 * not traverse the host bridge. Such a mapping should program
+	 * the DMA engine with PCI bus addresses.
+	 */
+	PCI_P2PDMA_MAP_BUS_ADDR,
+
+	/*
+	 * PCI_P2PDMA_MAP_THRU_HOST_BRIDGE: Indicates two devices can talk
+	 * to each other, but the transaction traverses a host bridge on the
+	 * allowlist. In this case, a normal mapping either with CPU physical
+	 * addresses (in the case of dma-direct) or IOVA addresses (in the
+	 * case of IOMMUs) should be used to program the DMA engine.
+	 */
+	PCI_P2PDMA_MAP_THRU_HOST_BRIDGE,
+};
+
+struct pci_p2pdma_map_state {
+	struct dev_pagemap *pgmap;
+	int map;
+	u64 bus_off;
+};
+
+#ifdef CONFIG_PCI_P2PDMA
+enum pci_p2pdma_map_type
+pci_p2pdma_map_segment(struct pci_p2pdma_map_state *state, struct device *dev,
+		       struct scatterlist *sg);
+#else /* CONFIG_PCI_P2PDMA */
+static inline enum pci_p2pdma_map_type
+pci_p2pdma_map_segment(struct pci_p2pdma_map_state *state, struct device *dev,
+		       struct scatterlist *sg)
+{
+	return PCI_P2PDMA_MAP_NOT_SUPPORTED;
+}
+#endif /* CONFIG_PCI_P2PDMA */
+
 #endif /* _LINUX_DMA_MAP_OPS_H */
-- 
2.30.2



  parent reply	other threads:[~2022-07-08 16:51 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-07-08 16:50 [PATCH v8 00/13] DMA Mapping P2PDMA Pages Logan Gunthorpe
2022-07-08 16:50 ` [PATCH v8 01/13] lib/scatterlist: add flag for indicating P2PDMA segments in an SGL Logan Gunthorpe
2022-07-14  5:12   ` Christoph Hellwig
2022-07-08 16:50 ` [PATCH v8 02/13] PCI/P2PDMA: Attempt to set map_type if it has not been set Logan Gunthorpe
2022-07-08 16:50 ` Logan Gunthorpe [this message]
2022-07-08 16:50 ` [PATCH v8 04/13] dma-mapping: allow EREMOTEIO return code for P2PDMA transfers Logan Gunthorpe
2022-07-08 16:50 ` [PATCH v8 05/13] dma-direct: support PCI P2PDMA pages in dma-direct map_sg Logan Gunthorpe
2022-07-08 16:50 ` [PATCH v8 06/13] dma-mapping: add flags to dma_map_ops to indicate PCI P2PDMA support Logan Gunthorpe
2022-07-08 16:50 ` [PATCH v8 07/13] iommu: Explicitly skip bus address marked segments in __iommu_map_sg() Logan Gunthorpe
2022-07-08 16:50 ` [PATCH v8 08/13] iommu/dma: support PCI P2PDMA pages in dma-iommu map_sg Logan Gunthorpe
2022-07-08 16:51 ` [PATCH v8 09/13] nvme-pci: check DMA ops when indicating support for PCI P2PDMA Logan Gunthorpe
2022-07-08 16:51 ` [PATCH v8 10/13] nvme-pci: convert to using dma_map_sgtable() Logan Gunthorpe
2022-07-08 16:51 ` [PATCH v8 11/13] RDMA/core: introduce ib_dma_pci_p2p_dma_supported() Logan Gunthorpe
2022-07-08 16:51 ` [PATCH v8 12/13] RDMA/rw: drop pci_p2pdma_[un]map_sg() Logan Gunthorpe
2022-07-08 16:51 ` [PATCH v8 13/13] PCI/P2PDMA: Remove pci_p2pdma_[un]map_sg() Logan Gunthorpe
2022-07-14  5:13 ` [PATCH v8 00/13] DMA Mapping P2PDMA Pages Christoph Hellwig
2022-07-26 11:29 ` Christoph Hellwig
2022-07-26 15:55   ` Logan Gunthorpe
2022-08-01 14:04     ` Robin Murphy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220708165104.5005-4-logang@deltatee.com \
    --to=logang@deltatee.com \
    --cc=bhelgaas@google.com \
    --cc=christian.koenig@amd.com \
    --cc=ckulkarnilinux@gmail.com \
    --cc=dan.j.williams@intel.com \
    --cc=daniel.vetter@ffwll.ch \
    --cc=dave.b.minturn@intel.com \
    --cc=dave.hansen@linux.intel.com \
    --cc=ddutile@redhat.com \
    --cc=hch@lst.de \
    --cc=helgaas@kernel.org \
    --cc=iommu@lists.linux-foundation.org \
    --cc=iommu@lists.linux.dev \
    --cc=ira.weiny@intel.com \
    --cc=jason@jlekstrand.net \
    --cc=jgg@ziepe.ca \
    --cc=jhubbard@nvidia.com \
    --cc=jianxin.xiong@intel.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linux-nvme@lists.infradead.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=martin.oliveira@eideticom.com \
    --cc=rcampbell@nvidia.com \
    --cc=robin.murphy@arm.com \
    --cc=sbates@raithlin.com \
    --cc=willy@infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox