linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Christoph Hellwig <hch@lst.de>
To: Jens Axboe <axboe@kernel.dk>
Cc: Paolo Valente <paolo.valente@linaro.org>,
	Tejun Heo <tj@kernel.org>, James Smart <james.smart@broadcom.com>,
	Dick Kennedy <dick.kennedy@broadcom.com>,
	linux-block@vger.kernel.org, cgroups@vger.kernel.org,
	linux-nvme@lists.infradead.org, linux-mm@kvack.org
Subject: [PATCH 04/15] blk-cgroup: move blkcg_{get,set}_fc_appid out of line
Date: Wed, 20 Apr 2022 06:27:12 +0200	[thread overview]
Message-ID: <20220420042723.1010598-5-hch@lst.de> (raw)
In-Reply-To: <20220420042723.1010598-1-hch@lst.de>

No need to have these helpers inline.  Also remove the stubs and just use
an IS_ENABLED for the get side (the set side already is only built
conditionlly).

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 block/Makefile                |  1 +
 block/blk-cgroup-fc-appid.c   | 57 ++++++++++++++++++++++++++++++++++
 drivers/scsi/lpfc/lpfc_scsi.c |  4 ++-
 include/linux/blk-cgroup.h    | 58 ++---------------------------------
 4 files changed, 63 insertions(+), 57 deletions(-)
 create mode 100644 block/blk-cgroup-fc-appid.c

diff --git a/block/Makefile b/block/Makefile
index 3950ecbc5c263..4e01bb71ad6e0 100644
--- a/block/Makefile
+++ b/block/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_BLK_DEV_BSG_COMMON) += bsg.o
 obj-$(CONFIG_BLK_DEV_BSGLIB)	+= bsg-lib.o
 obj-$(CONFIG_BLK_CGROUP)	+= blk-cgroup.o
 obj-$(CONFIG_BLK_CGROUP_RWSTAT)	+= blk-cgroup-rwstat.o
+obj-$(CONFIG_BLK_CGROUP_FC_APPID) += blk-cgroup-fc-appid.o
 obj-$(CONFIG_BLK_DEV_THROTTLING)	+= blk-throttle.o
 obj-$(CONFIG_BLK_CGROUP_IOPRIO)	+= blk-ioprio.o
 obj-$(CONFIG_BLK_CGROUP_IOLATENCY)	+= blk-iolatency.o
diff --git a/block/blk-cgroup-fc-appid.c b/block/blk-cgroup-fc-appid.c
new file mode 100644
index 0000000000000..760a2e1878dde
--- /dev/null
+++ b/block/blk-cgroup-fc-appid.c
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "blk-cgroup.h"
+
+/**
+ * blkcg_set_fc_appid - set the fc_app_id field associted to blkcg
+ * @app_id: application identifier
+ * @cgrp_id: cgroup id
+ * @app_id_len: size of application identifier
+ */
+int blkcg_set_fc_appid(char *app_id, u64 cgrp_id, size_t app_id_len)
+{
+	struct cgroup *cgrp;
+	struct cgroup_subsys_state *css;
+	struct blkcg *blkcg;
+	int ret  = 0;
+
+	if (app_id_len > FC_APPID_LEN)
+		return -EINVAL;
+
+	cgrp = cgroup_get_from_id(cgrp_id);
+	if (!cgrp)
+		return -ENOENT;
+	css = cgroup_get_e_css(cgrp, &io_cgrp_subsys);
+	if (!css) {
+		ret = -ENOENT;
+		goto out_cgrp_put;
+	}
+	blkcg = css_to_blkcg(css);
+	/*
+	 * There is a slight race condition on setting the appid.
+	 * Worst case an I/O may not find the right id.
+	 * This is no different from the I/O we let pass while obtaining
+	 * the vmid from the fabric.
+	 * Adding the overhead of a lock is not necessary.
+	 */
+	strlcpy(blkcg->fc_app_id, app_id, app_id_len);
+	css_put(css);
+out_cgrp_put:
+	cgroup_put(cgrp);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(blkcg_set_fc_appid);
+
+/**
+ * blkcg_get_fc_appid - get the fc app identifier associated with a bio
+ * @bio: target bio
+ *
+ * On success return the fc_app_id, on failure return NULL
+ */
+char *blkcg_get_fc_appid(struct bio *bio)
+{
+	if (!bio->bi_blkg || bio->bi_blkg->blkcg->fc_app_id[0] == '\0')
+		return NULL;
+	return bio->bi_blkg->blkcg->fc_app_id;
+}
+EXPORT_SYMBOL_GPL(blkcg_get_fc_appid);
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index ba9dbb51b75f0..f6b83853f7eea 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -5528,7 +5528,9 @@ static char *lpfc_is_command_vm_io(struct scsi_cmnd *cmd)
 {
 	struct bio *bio = scsi_cmd_to_rq(cmd)->bio;
 
-	return bio ? blkcg_get_fc_appid(bio) : NULL;
+	if (!IS_ENABLED(CONFIG_BLK_CGROUP_FC_APPID) || !bio)
+		return NULL;
+	return blkcg_get_fc_appid(bio);
 }
 
 /**
diff --git a/include/linux/blk-cgroup.h b/include/linux/blk-cgroup.h
index 652cd05b0924c..7a2f7de30173c 100644
--- a/include/linux/blk-cgroup.h
+++ b/include/linux/blk-cgroup.h
@@ -218,61 +218,7 @@ static inline struct blkcg *bio_blkcg(struct bio *bio) { return NULL; }
 
 #endif	/* CONFIG_BLK_CGROUP */
 
-#ifdef CONFIG_BLK_CGROUP_FC_APPID
-/*
- * Sets the fc_app_id field associted to blkcg
- * @app_id: application identifier
- * @cgrp_id: cgroup id
- * @app_id_len: size of application identifier
- */
-static inline int blkcg_set_fc_appid(char *app_id, u64 cgrp_id, size_t app_id_len)
-{
-	struct cgroup *cgrp;
-	struct cgroup_subsys_state *css;
-	struct blkcg *blkcg;
-	int ret  = 0;
-
-	if (app_id_len > FC_APPID_LEN)
-		return -EINVAL;
-
-	cgrp = cgroup_get_from_id(cgrp_id);
-	if (!cgrp)
-		return -ENOENT;
-	css = cgroup_get_e_css(cgrp, &io_cgrp_subsys);
-	if (!css) {
-		ret = -ENOENT;
-		goto out_cgrp_put;
-	}
-	blkcg = css_to_blkcg(css);
-	/*
-	 * There is a slight race condition on setting the appid.
-	 * Worst case an I/O may not find the right id.
-	 * This is no different from the I/O we let pass while obtaining
-	 * the vmid from the fabric.
-	 * Adding the overhead of a lock is not necessary.
-	 */
-	strlcpy(blkcg->fc_app_id, app_id, app_id_len);
-	css_put(css);
-out_cgrp_put:
-	cgroup_put(cgrp);
-	return ret;
-}
+int blkcg_set_fc_appid(char *app_id, u64 cgrp_id, size_t app_id_len);
+char *blkcg_get_fc_appid(struct bio *bio);
 
-/**
- * blkcg_get_fc_appid - get the fc app identifier associated with a bio
- * @bio: target bio
- *
- * On success return the fc_app_id, on failure return NULL
- */
-static inline char *blkcg_get_fc_appid(struct bio *bio)
-{
-	if (bio && bio->bi_blkg &&
-		(bio->bi_blkg->blkcg->fc_app_id[0] != '\0'))
-		return bio->bi_blkg->blkcg->fc_app_id;
-	return NULL;
-}
-#else
-static inline int blkcg_set_fc_appid(char *buf, u64 id, size_t len) { return -EINVAL; }
-static inline char *blkcg_get_fc_appid(struct bio *bio) { return NULL; }
-#endif /*CONFIG_BLK_CGROUP_FC_APPID*/
 #endif	/* _BLK_CGROUP_H */
-- 
2.30.2



  parent reply	other threads:[~2022-04-20  4:27 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-20  4:27 make the blkcg and blkcg structures private Christoph Hellwig
2022-04-20  4:27 ` [PATCH 01/15] blk-cgroup: remove __bio_blkcg Christoph Hellwig
2022-04-21 21:21   ` Tejun Heo
2022-04-20  4:27 ` [PATCH 02/15] nvme-fc: don't support the appid attribute without CONFIG_BLK_CGROUP_FC_APPID Christoph Hellwig
2022-04-20  4:27 ` [PATCH 03/15] nvme-fc: fold t fc_update_appid into fc_appid_store Christoph Hellwig
2022-04-20  4:27 ` Christoph Hellwig [this message]
2022-04-20  4:27 ` [PATCH 05/15] blk-cgroup: move blk_cgroup_congested out line Christoph Hellwig
2022-04-20  4:27 ` [PATCH 06/15] blk-cgroup: move blkcg_{pin,unpin}_online out of line Christoph Hellwig
2022-04-20  4:27 ` [PATCH 07/15] blk-cgroup: move struct blkcg to block/blk-cgroup.h Christoph Hellwig
2022-04-20  4:27 ` [PATCH 08/15] blktrace: cleanup the __trace_note_message interface Christoph Hellwig
2022-04-20  4:27 ` [PATCH 09/15] blk-cgroup: replace bio_blkcg with bio_blkcg_css Christoph Hellwig
2022-04-20  4:27 ` [PATCH 10/15] blk-cgroup: remove pointless CONFIG_BLOCK ifdefs Christoph Hellwig
2022-04-20  4:27 ` [PATCH 11/15] blk-cgroup: remove unneeded includes from <linux/blk-cgroup.h> Christoph Hellwig
2022-04-20  4:27 ` [PATCH 12/15] blk-cgroup: move blkcg_css to blk-cgroup.c Christoph Hellwig
2022-04-20  4:27 ` [PATCH 13/15] blk-cgroup: cleanup blk_cgroup_congested Christoph Hellwig
2022-04-20  4:27 ` [PATCH 14/15] blk-cgroup: cleanup blkcg_maybe_throttle_current Christoph Hellwig
2022-04-20  4:27 ` [PATCH 15/15] kthread: unexport kthread_blkcg Christoph Hellwig
2022-04-21 21:44 ` make the blkcg and blkcg structures private Tejun Heo
2022-04-22  4:23   ` Christoph Hellwig
2022-04-22 15:42     ` Tejun Heo
2022-05-02 16:46 ` Christoph Hellwig
2022-05-02 20:06 ` Jens Axboe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220420042723.1010598-5-hch@lst.de \
    --to=hch@lst.de \
    --cc=axboe@kernel.dk \
    --cc=cgroups@vger.kernel.org \
    --cc=dick.kennedy@broadcom.com \
    --cc=james.smart@broadcom.com \
    --cc=linux-block@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linux-nvme@lists.infradead.org \
    --cc=paolo.valente@linaro.org \
    --cc=tj@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox