From: Nadav Amit <nadav.amit@gmail.com>
To: linux-mm@kvack.org
Cc: linux-kernel@vger.kernel.org, Nadav Amit <namit@vmware.com>,
Andi Kleen <ak@linux.intel.com>,
Andrea Arcangeli <aarcange@redhat.com>,
Andrew Cooper <andrew.cooper3@citrix.com>,
Andrew Morton <akpm@linux-foundation.org>,
Andy Lutomirski <luto@kernel.org>,
Dave Hansen <dave.hansen@linux.intel.com>,
Peter Xu <peterx@redhat.com>,
Peter Zijlstra <peterz@infradead.org>,
Thomas Gleixner <tglx@linutronix.de>,
Will Deacon <will@kernel.org>, Yu Zhao <yuzhao@google.com>,
Nick Piggin <npiggin@gmail.com>,
x86@kernel.org
Subject: [PATCH v2 1/5] x86: Detection of Knights Landing A/D leak
Date: Thu, 21 Oct 2021 05:21:08 -0700 [thread overview]
Message-ID: <20211021122112.592634-2-namit@vmware.com> (raw)
In-Reply-To: <20211021122112.592634-1-namit@vmware.com>
From: Nadav Amit <namit@vmware.com>
Knights Landing has a issue that a thread setting A or D bits may not do
so atomically against checking the present bit. A thread which is going
to page fault may still set those bits, even though the present bit was
already atomically cleared.
This implies that when the kernel clears present atomically, some time
later the supposed to be zero entry could be corrupted with stray A or D
bits.
Since the PTE could be already used for storing a swap index, or a NUMA
migration index, this cannot be tolerated. Most of the time the kernel
detects the problem, but in some rare cases it may not.
This patch adds an interface to detect the bug, which will be used in
the following patch.
[ Based on a patch by Andi Kleen ]
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Cc: x86@kernel.org
Link: https://lore.kernel.org/lkml/1465919919-2093-1-git-send-email-lukasz.anaczkowski@intel.com/
Signed-off-by: Nadav Amit <namit@vmware.com>
---
arch/x86/include/asm/cpufeatures.h | 1 +
arch/x86/kernel/cpu/intel.c | 5 +++++
2 files changed, 6 insertions(+)
diff --git a/arch/x86/include/asm/cpufeatures.h b/arch/x86/include/asm/cpufeatures.h
index d0ce5cfd3ac1..32d0aabd788d 100644
--- a/arch/x86/include/asm/cpufeatures.h
+++ b/arch/x86/include/asm/cpufeatures.h
@@ -436,5 +436,6 @@
#define X86_BUG_TAA X86_BUG(22) /* CPU is affected by TSX Async Abort(TAA) */
#define X86_BUG_ITLB_MULTIHIT X86_BUG(23) /* CPU may incur MCE during certain page attribute changes */
#define X86_BUG_SRBDS X86_BUG(24) /* CPU may leak RNG bits if not mitigated */
+#define X86_BUG_PTE_LEAK X86_BUG(25) /* PTE may leak A/D bits after clear */
#endif /* _ASM_X86_CPUFEATURES_H */
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 8321c43554a1..40bcba6e3641 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -296,6 +296,11 @@ static void early_init_intel(struct cpuinfo_x86 *c)
}
}
+ if (c->x86_model == 87) {
+ pr_info_once("Enabling PTE leaking workaround\n");
+ set_cpu_bug(c, X86_BUG_PTE_LEAK);
+ }
+
/*
* Intel Quark Core DevMan_001.pdf section 6.4.11
* "The operating system also is required to invalidate (i.e., flush)
--
2.25.1
next prev parent reply other threads:[~2021-10-21 19:52 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-21 12:21 [PATCH v2 0/5] mm/mprotect: avoid unnecessary TLB flushes Nadav Amit
2021-10-21 12:21 ` Nadav Amit [this message]
2021-10-26 15:54 ` [PATCH v2 1/5] x86: Detection of Knights Landing A/D leak Dave Hansen
2021-10-26 15:57 ` Nadav Amit
2021-10-21 12:21 ` [PATCH v2 2/5] mm: avoid unnecessary flush on change_huge_pmd() Nadav Amit
2021-10-25 10:52 ` Peter Zijlstra
2021-10-25 16:29 ` Nadav Amit
2021-10-26 16:06 ` Dave Hansen
2021-10-26 16:47 ` Nadav Amit
2021-10-26 16:53 ` Nadav Amit
2021-10-26 17:44 ` Nadav Amit
2021-10-26 18:44 ` Dave Hansen
2021-10-26 19:06 ` Nadav Amit
2021-10-26 19:40 ` Dave Hansen
2021-10-26 20:07 ` Nadav Amit
2021-10-26 20:47 ` Dave Hansen
2021-10-21 12:21 ` [PATCH v2 3/5] x86/mm: check exec permissions on fault Nadav Amit
2021-10-25 10:59 ` Peter Zijlstra
2021-10-25 11:13 ` Andrew Cooper
2021-10-25 14:23 ` Dave Hansen
2021-10-25 14:20 ` Dave Hansen
2021-10-25 16:19 ` Nadav Amit
2021-10-25 17:45 ` Dave Hansen
2021-10-25 17:51 ` Nadav Amit
2021-10-25 18:00 ` Dave Hansen
2021-10-21 12:21 ` [PATCH v2 4/5] mm/mprotect: use mmu_gather Nadav Amit
2021-10-21 12:21 ` [PATCH v2 5/5] mm/mprotect: do not flush on permission promotion Nadav Amit
2021-10-25 11:12 ` Peter Zijlstra
2021-10-25 16:27 ` Nadav Amit
2021-10-22 3:04 ` [PATCH v2 0/5] mm/mprotect: avoid unnecessary TLB flushes Andrew Morton
2021-10-22 21:58 ` Nadav Amit
2021-10-26 16:09 ` Dave Hansen
2021-10-25 10:50 ` Peter Zijlstra
2021-10-25 16:42 ` Nadav Amit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211021122112.592634-2-namit@vmware.com \
--to=nadav.amit@gmail.com \
--cc=aarcange@redhat.com \
--cc=ak@linux.intel.com \
--cc=akpm@linux-foundation.org \
--cc=andrew.cooper3@citrix.com \
--cc=dave.hansen@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=luto@kernel.org \
--cc=namit@vmware.com \
--cc=npiggin@gmail.com \
--cc=peterx@redhat.com \
--cc=peterz@infradead.org \
--cc=tglx@linutronix.de \
--cc=will@kernel.org \
--cc=x86@kernel.org \
--cc=yuzhao@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox