linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Miaohe Lin <linmiaohe@huawei.com>
To: <akpm@linux-foundation.org>
Cc: <hch@infradead.org>, <linux-kernel@vger.kernel.org>,
	<linux-mm@kvack.org>, <linmiaohe@huawei.com>
Subject: [PATCH] mm/swapfile: fold scan_swap_map() into the only caller get_swap_page_of_type()
Date: Thu, 27 May 2021 20:03:28 +0800	[thread overview]
Message-ID: <20210527120328.3935132-1-linmiaohe@huawei.com> (raw)

We should fold scan_swap_map() into the only caller get_swap_page_of_type()
and update the comments referring to it to make the code more succinct.

Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
---
Hi Andrew,
  Please feel free to merge this with
mm-swapfile-move-get_swap_page_of_type-under-config_hibernation.patch and
mm-swapfile-move-get_swap_page_of_type-under-config_hibernation-fix.patch
Many thanks!
---
 mm/swapfile.c | 57 ++++++++++++++++-----------------------------------
 1 file changed, 18 insertions(+), 39 deletions(-)

diff --git a/mm/swapfile.c b/mm/swapfile.c
index 53d2161edfc0..166be489664d 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -453,10 +453,10 @@ static void swap_cluster_schedule_discard(struct swap_info_struct *si,
 		unsigned int idx)
 {
 	/*
-	 * If scan_swap_map() can't find a free cluster, it will check
+	 * If scan_swap_map_slots() can't find a free cluster, it will check
 	 * si->swap_map directly. To make sure the discarding cluster isn't
-	 * taken by scan_swap_map(), mark the swap entries bad (occupied). It
-	 * will be cleared after discard
+	 * taken by scan_swap_map_slots(), mark the swap entries bad (occupied).
+	 * It will be cleared after discard
 	 */
 	memset(si->swap_map + idx * SWAPFILE_CLUSTER,
 			SWAP_MAP_BAD, SWAPFILE_CLUSTER);
@@ -589,7 +589,7 @@ static void dec_cluster_info_page(struct swap_info_struct *p,
 }
 
 /*
- * It's possible scan_swap_map() uses a free cluster in the middle of free
+ * It's possible scan_swap_map_slots() uses a free cluster in the middle of free
  * cluster list. Avoiding such abuse to avoid list corruption.
  */
 static bool
@@ -1099,14 +1099,14 @@ int get_swap_pages(int n_goal, swp_entry_t swp_entries[], int entry_size)
 nextsi:
 		/*
 		 * if we got here, it's likely that si was almost full before,
-		 * and since scan_swap_map() can drop the si->lock, multiple
-		 * callers probably all tried to get a page from the same si
-		 * and it filled up before we could get one; or, the si filled
-		 * up between us dropping swap_avail_lock and taking si->lock.
-		 * Since we dropped the swap_avail_lock, the swap_avail_head
-		 * list may have been modified; so if next is still in the
-		 * swap_avail_head list then try it, otherwise start over
-		 * if we have not gotten any slots.
+		 * and since scan_swap_map_slots() can drop the si->lock,
+		 * multiple callers probably all tried to get a page from the
+		 * same si and it filled up before we could get one; or, the si
+		 * filled up between us dropping swap_avail_lock and taking
+		 * si->lock. Since we dropped the swap_avail_lock, the
+		 * swap_avail_head list may have been modified; so if next is
+		 * still in the swap_avail_head list then try it, otherwise
+		 * start over if we have not gotten any slots.
 		 */
 		if (plist_node_empty(&next->avail_lists[node]))
 			goto start_over;
@@ -1774,42 +1774,21 @@ int free_swap_and_cache(swp_entry_t entry)
 
 #ifdef CONFIG_HIBERNATION
 
-static unsigned long scan_swap_map(struct swap_info_struct *si,
-				   unsigned char usage)
-{
-	swp_entry_t entry;
-	int n_ret;
-
-	n_ret = scan_swap_map_slots(si, usage, 1, &entry);
-
-	if (n_ret)
-		return swp_offset(entry);
-	else
-		return 0;
-
-}
-
 swp_entry_t get_swap_page_of_type(int type)
 {
 	struct swap_info_struct *si = swap_type_to_swap_info(type);
-	pgoff_t offset;
+	swp_entry_t entry = {0};
 
 	if (!si)
 		goto fail;
 
+	/* This is called for allocating swap entry, not cache */
 	spin_lock(&si->lock);
-	if (si->flags & SWP_WRITEOK) {
-		/* This is called for allocating swap entry, not cache */
-		offset = scan_swap_map(si, 1);
-		if (offset) {
-			atomic_long_dec(&nr_swap_pages);
-			spin_unlock(&si->lock);
-			return swp_entry(type, offset);
-		}
-	}
+	if ((si->flags & SWP_WRITEOK) && scan_swap_map_slots(si, 1, 1, &entry))
+		atomic_long_dec(&nr_swap_pages);
 	spin_unlock(&si->lock);
 fail:
-	return (swp_entry_t) {0};
+	return entry;
 }
 
 /*
@@ -2649,7 +2628,7 @@ SYSCALL_DEFINE1(swapoff, const char __user *, specialfile)
 	spin_lock(&p->lock);
 	drain_mmlist();
 
-	/* wait for anyone still in scan_swap_map */
+	/* wait for anyone still in scan_swap_map_slots */
 	p->highest_bit = 0;		/* cuts scans short */
 	while (p->flags >= SWP_SCANNING) {
 		spin_unlock(&p->lock);
-- 
2.23.0



                 reply	other threads:[~2021-05-27 12:04 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210527120328.3935132-1-linmiaohe@huawei.com \
    --to=linmiaohe@huawei.com \
    --cc=akpm@linux-foundation.org \
    --cc=hch@infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox