From: Masayoshi Mizuma <msys.mizuma@gmail.com>
To: Waiman Long <longman@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>,
Michal Hocko <mhocko@kernel.org>,
Vladimir Davydov <vdavydov.dev@gmail.com>,
Andrew Morton <akpm@linux-foundation.org>,
Tejun Heo <tj@kernel.org>, Christoph Lameter <cl@linux.com>,
Pekka Enberg <penberg@kernel.org>,
David Rientjes <rientjes@google.com>,
Joonsoo Kim <iamjoonsoo.kim@lge.com>,
Vlastimil Babka <vbabka@suse.cz>, Roman Gushchin <guro@fb.com>,
linux-kernel@vger.kernel.org, cgroups@vger.kernel.org,
linux-mm@kvack.org, Shakeel Butt <shakeelb@google.com>,
Muchun Song <songmuchun@bytedance.com>,
Alex Shi <alex.shi@linux.alibaba.com>,
Chris Down <chris@chrisdown.name>,
Yafang Shao <laoar.shao@gmail.com>,
Wei Yang <richard.weiyang@gmail.com>,
Xing Zhengjun <zhengjun.xing@linux.intel.com>
Subject: Re: [PATCH v3 3/5] mm/memcg: Cache vmstat data in percpu memcg_stock_pcp
Date: Wed, 14 Apr 2021 23:28:04 -0400 [thread overview]
Message-ID: <20210415032804.kocbusnrmaambbkr@gabell> (raw)
In-Reply-To: <20210414012027.5352-4-longman@redhat.com>
On Tue, Apr 13, 2021 at 09:20:25PM -0400, Waiman Long wrote:
> Before the new slab memory controller with per object byte charging,
> charging and vmstat data update happen only when new slab pages are
> allocated or freed. Now they are done with every kmem_cache_alloc()
> and kmem_cache_free(). This causes additional overhead for workloads
> that generate a lot of alloc and free calls.
>
> The memcg_stock_pcp is used to cache byte charge for a specific
> obj_cgroup to reduce that overhead. To further reducing it, this patch
> makes the vmstat data cached in the memcg_stock_pcp structure as well
> until it accumulates a page size worth of update or when other cached
> data change.
>
> On a 2-socket Cascade Lake server with instrumentation enabled and this
> patch applied, it was found that about 17% (946796 out of 5515184) of the
> time when __mod_obj_stock_state() is called leads to an actual call to
> mod_objcg_state() after initial boot. When doing parallel kernel build,
> the figure was about 16% (21894614 out of 139780628). So caching the
> vmstat data reduces the number of calls to mod_objcg_state() by more
> than 80%.
>
> Signed-off-by: Waiman Long <longman@redhat.com>
> Reviewed-by: Shakeel Butt <shakeelb@google.com>
> ---
> mm/memcontrol.c | 78 +++++++++++++++++++++++++++++++++++++++++++------
> mm/slab.h | 26 +++++++----------
> 2 files changed, 79 insertions(+), 25 deletions(-)
>
> diff --git a/mm/memcontrol.c b/mm/memcontrol.c
> index b19100c68aa0..539c3b632e47 100644
> --- a/mm/memcontrol.c
> +++ b/mm/memcontrol.c
> @@ -2220,7 +2220,10 @@ struct memcg_stock_pcp {
>
> #ifdef CONFIG_MEMCG_KMEM
> struct obj_cgroup *cached_objcg;
> + struct pglist_data *cached_pgdat;
> unsigned int nr_bytes;
> + int vmstat_idx;
> + int vmstat_bytes;
> #endif
>
> struct work_struct work;
> @@ -3157,6 +3160,21 @@ void __memcg_kmem_uncharge_page(struct page *page, int order)
> css_put(&memcg->css);
> }
>
> +static inline void mod_objcg_state(struct obj_cgroup *objcg,
> + struct pglist_data *pgdat,
> + enum node_stat_item idx, int nr)
> +{
> + struct mem_cgroup *memcg;
> + struct lruvec *lruvec = NULL;
> +
> + rcu_read_lock();
> + memcg = obj_cgroup_memcg(objcg);
> + if (pgdat)
> + lruvec = mem_cgroup_lruvec(memcg, pgdat);
> + __mod_memcg_lruvec_state(memcg, lruvec, idx, nr);
> + rcu_read_unlock();
> +}
> +
> static bool consume_obj_stock(struct obj_cgroup *objcg, unsigned int nr_bytes)
> {
> struct memcg_stock_pcp *stock;
> @@ -3207,6 +3225,14 @@ static void drain_obj_stock(struct memcg_stock_pcp *stock)
> stock->nr_bytes = 0;
> }
>
> + if (stock->vmstat_bytes) {
> + mod_objcg_state(old, stock->cached_pgdat, stock->vmstat_idx,
> + stock->vmstat_bytes);
> + stock->vmstat_bytes = 0;
> + stock->vmstat_idx = 0;
> + stock->cached_pgdat = NULL;
> + }
> +
> obj_cgroup_put(old);
> stock->cached_objcg = NULL;
> }
> @@ -3251,6 +3277,48 @@ static void refill_obj_stock(struct obj_cgroup *objcg, unsigned int nr_bytes)
> local_irq_restore(flags);
> }
>
> +static void __mod_obj_stock_state(struct obj_cgroup *objcg,
> + struct pglist_data *pgdat, int idx, int nr)
> +{
> + struct memcg_stock_pcp *stock = this_cpu_ptr(&memcg_stock);
> +
> + if (stock->cached_objcg != objcg) {
> + /* Output the current data as is */
> + } else if (!stock->vmstat_bytes) {
> + /* Save the current data */
> + stock->vmstat_bytes = nr;
> + stock->vmstat_idx = idx;
> + stock->cached_pgdat = pgdat;
> + nr = 0;
> + } else if ((stock->cached_pgdat != pgdat) ||
> + (stock->vmstat_idx != idx)) {
> + /* Output the cached data & save the current data */
> + swap(nr, stock->vmstat_bytes);
> + swap(idx, stock->vmstat_idx);
> + swap(pgdat, stock->cached_pgdat);
> + } else {
> + stock->vmstat_bytes += nr;
> + if (abs(nr) > PAGE_SIZE) {
> + nr = stock->vmstat_bytes;
> + stock->vmstat_bytes = 0;
> + } else {
> + nr = 0;
> + }
> + }
> + if (nr)
> + mod_objcg_state(objcg, pgdat, idx, nr);
> +}
> +
> +void mod_obj_stock_state(struct obj_cgroup *objcg, struct pglist_data *pgdat,
> + int idx, int nr)
> +{
> + unsigned long flags;
> +
> + local_irq_save(flags);
> + __mod_obj_stock_state(objcg, pgdat, idx, nr);
> + local_irq_restore(flags);
> +}
> +
> int obj_cgroup_charge(struct obj_cgroup *objcg, gfp_t gfp, size_t size)
> {
> struct mem_cgroup *memcg;
> @@ -3300,18 +3368,10 @@ void obj_cgroup_uncharge_mod_state(struct obj_cgroup *objcg, size_t size,
> struct pglist_data *pgdat, int idx)
> {
> unsigned long flags;
> - struct mem_cgroup *memcg;
> - struct lruvec *lruvec = NULL;
>
> local_irq_save(flags);
> __refill_obj_stock(objcg, size);
> -
> - rcu_read_lock();
> - memcg = obj_cgroup_memcg(objcg);
> - if (pgdat)
> - lruvec = mem_cgroup_lruvec(memcg, pgdat);
> - __mod_memcg_lruvec_state(memcg, lruvec, idx, -(int)size);
> - rcu_read_unlock();
> + __mod_obj_stock_state(objcg, pgdat, idx, -(int)size);
> local_irq_restore(flags);
> }
>
> diff --git a/mm/slab.h b/mm/slab.h
> index 677cdc52e641..03bd9813422b 100644
> --- a/mm/slab.h
> +++ b/mm/slab.h
> @@ -239,6 +239,8 @@ static inline bool kmem_cache_debug_flags(struct kmem_cache *s, slab_flags_t fla
> #ifdef CONFIG_MEMCG_KMEM
> int memcg_alloc_page_obj_cgroups(struct page *page, struct kmem_cache *s,
> gfp_t gfp, bool new_page);
> +void mod_obj_stock_state(struct obj_cgroup *objcg, struct pglist_data *pgdat,
> + int idx, int nr);
>
> static inline void memcg_free_page_obj_cgroups(struct page *page)
> {
> @@ -283,20 +285,6 @@ static inline bool memcg_slab_pre_alloc_hook(struct kmem_cache *s,
> return true;
> }
>
> -static inline void mod_objcg_state(struct obj_cgroup *objcg,
> - struct pglist_data *pgdat,
> - enum node_stat_item idx, int nr)
> -{
> - struct mem_cgroup *memcg;
> - struct lruvec *lruvec;
> -
> - rcu_read_lock();
> - memcg = obj_cgroup_memcg(objcg);
> - lruvec = mem_cgroup_lruvec(memcg, pgdat);
> - mod_memcg_lruvec_state(memcg, lruvec, idx, nr);
> - rcu_read_unlock();
> -}
> -
> static inline void memcg_slab_post_alloc_hook(struct kmem_cache *s,
> struct obj_cgroup *objcg,
> gfp_t flags, size_t size,
> @@ -324,8 +312,9 @@ static inline void memcg_slab_post_alloc_hook(struct kmem_cache *s,
> off = obj_to_index(s, page, p[i]);
> obj_cgroup_get(objcg);
> page_objcgs(page)[off] = objcg;
> - mod_objcg_state(objcg, page_pgdat(page),
> - cache_vmstat_idx(s), obj_full_size(s));
> + mod_obj_stock_state(objcg, page_pgdat(page),
> + cache_vmstat_idx(s),
> + obj_full_size(s));
> } else {
> obj_cgroup_uncharge(objcg, obj_full_size(s));
> }
> @@ -408,6 +397,11 @@ static inline void memcg_slab_free_hook(struct kmem_cache *s,
> void **p, int objects)
> {
> }
> +
> +static inline void mod_obj_stock_state(struct obj_cgroup *objcg,
> + struct pglist_data *pgdat, int idx, int nr)
> +{
> +}
> #endif /* CONFIG_MEMCG_KMEM */
>
> static inline struct kmem_cache *virt_to_cache(const void *obj)
> --
> 2.18.1
>
Please feel free to add:
Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Thanks!
Masa
next prev parent reply other threads:[~2021-04-15 3:28 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-14 1:20 [PATCH v3 0/5] mm/memcg: Reduce kmemcache memory accounting overhead Waiman Long
2021-04-14 1:20 ` [PATCH v3 1/5] mm/memcg: Pass both memcg and lruvec to mod_memcg_lruvec_state() Waiman Long
2021-04-15 3:27 ` Masayoshi Mizuma
2021-04-15 16:40 ` Johannes Weiner
2021-04-15 16:59 ` Waiman Long
2021-04-16 15:48 ` Johannes Weiner
2021-04-14 1:20 ` [PATCH v3 2/5] mm/memcg: Introduce obj_cgroup_uncharge_mod_state() Waiman Long
2021-04-15 3:27 ` Masayoshi Mizuma
2021-04-15 16:30 ` Johannes Weiner
2021-04-15 16:35 ` Waiman Long
2021-04-15 18:10 ` Johannes Weiner
2021-04-15 18:47 ` Waiman Long
2021-04-15 19:40 ` Johannes Weiner
2021-04-15 19:44 ` Waiman Long
2021-04-15 20:19 ` Johannes Weiner
2021-04-14 1:20 ` [PATCH v3 3/5] mm/memcg: Cache vmstat data in percpu memcg_stock_pcp Waiman Long
2021-04-15 3:28 ` Masayoshi Mizuma [this message]
2021-04-15 16:50 ` Johannes Weiner
2021-04-15 17:08 ` Waiman Long
2021-04-15 18:13 ` Johannes Weiner
2021-04-14 1:20 ` [PATCH v3 4/5] mm/memcg: Separate out object stock data into its own struct Waiman Long
2021-04-15 3:28 ` Masayoshi Mizuma
2021-04-15 16:57 ` Johannes Weiner
2021-04-14 1:20 ` [PATCH v3 5/5] mm/memcg: Optimize user context object stock access Waiman Long
2021-04-15 3:28 ` Masayoshi Mizuma
2021-04-15 9:44 ` Christoph Lameter
2021-04-15 12:16 ` Masayoshi Mizuma
2021-04-15 17:53 ` Johannes Weiner
2021-04-15 18:16 ` Waiman Long
2021-04-15 18:53 ` Johannes Weiner
2021-04-15 19:06 ` Waiman Long
2021-04-15 3:26 ` [PATCH v3 0/5] mm/memcg: Reduce kmemcache memory accounting overhead Masayoshi Mizuma
2021-04-15 13:17 ` Waiman Long
2021-04-15 15:47 ` Masayoshi Mizuma
2021-04-15 17:10 ` Matthew Wilcox
2021-04-15 17:41 ` Waiman Long
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210415032804.kocbusnrmaambbkr@gabell \
--to=msys.mizuma@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=alex.shi@linux.alibaba.com \
--cc=cgroups@vger.kernel.org \
--cc=chris@chrisdown.name \
--cc=cl@linux.com \
--cc=guro@fb.com \
--cc=hannes@cmpxchg.org \
--cc=iamjoonsoo.kim@lge.com \
--cc=laoar.shao@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=longman@redhat.com \
--cc=mhocko@kernel.org \
--cc=penberg@kernel.org \
--cc=richard.weiyang@gmail.com \
--cc=rientjes@google.com \
--cc=shakeelb@google.com \
--cc=songmuchun@bytedance.com \
--cc=tj@kernel.org \
--cc=vbabka@suse.cz \
--cc=vdavydov.dev@gmail.com \
--cc=zhengjun.xing@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox