linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Yu Zhao <yuzhao@google.com>
To: linux-mm@kvack.org
Cc: Alex Shi <alex.shi@linux.alibaba.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	 Dave Hansen <dave.hansen@linux.intel.com>,
	Hillf Danton <hdanton@sina.com>,
	 Johannes Weiner <hannes@cmpxchg.org>,
	Joonsoo Kim <iamjoonsoo.kim@lge.com>,
	 Matthew Wilcox <willy@infradead.org>,
	Mel Gorman <mgorman@suse.de>, Michal Hocko <mhocko@suse.com>,
	 Roman Gushchin <guro@fb.com>, Vlastimil Babka <vbabka@suse.cz>,
	 Wei Yang <richard.weiyang@linux.alibaba.com>,
	Yang Shi <shy828301@gmail.com>,
	 Ying Huang <ying.huang@intel.com>,
	linux-kernel@vger.kernel.org,  page-reclaim@google.com,
	Yu Zhao <yuzhao@google.com>
Subject: [PATCH v1 08/14] mm/vmscan.c: refactor shrink_node()
Date: Sat, 13 Mar 2021 00:57:41 -0700	[thread overview]
Message-ID: <20210313075747.3781593-9-yuzhao@google.com> (raw)
In-Reply-To: <20210313075747.3781593-1-yuzhao@google.com>

Heuristics in shrink_node() are rather independent and can be
refactored into a separate function to improve readability.

Signed-off-by: Yu Zhao <yuzhao@google.com>
---
 mm/vmscan.c | 186 +++++++++++++++++++++++++++-------------------------
 1 file changed, 98 insertions(+), 88 deletions(-)

diff --git a/mm/vmscan.c b/mm/vmscan.c
index 562e87cbd7a1..1a24d2e0a4cb 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -2224,6 +2224,103 @@ enum scan_balance {
 	SCAN_FILE,
 };
 
+static void prepare_scan_count(pg_data_t *pgdat, struct scan_control *sc)
+{
+	unsigned long file;
+	struct lruvec *target_lruvec;
+
+	target_lruvec = mem_cgroup_lruvec(sc->target_mem_cgroup, pgdat);
+
+	/*
+	 * Determine the scan balance between anon and file LRUs.
+	 */
+	spin_lock_irq(&target_lruvec->lru_lock);
+	sc->anon_cost = target_lruvec->anon_cost;
+	sc->file_cost = target_lruvec->file_cost;
+	spin_unlock_irq(&target_lruvec->lru_lock);
+
+	/*
+	 * Target desirable inactive:active list ratios for the anon
+	 * and file LRU lists.
+	 */
+	if (!sc->force_deactivate) {
+		unsigned long refaults;
+
+		refaults = lruvec_page_state(target_lruvec,
+				WORKINGSET_ACTIVATE_ANON);
+		if (refaults != target_lruvec->refaults[0] ||
+			inactive_is_low(target_lruvec, LRU_INACTIVE_ANON))
+			sc->may_deactivate |= DEACTIVATE_ANON;
+		else
+			sc->may_deactivate &= ~DEACTIVATE_ANON;
+
+		/*
+		 * When refaults are being observed, it means a new
+		 * workingset is being established. Deactivate to get
+		 * rid of any stale active pages quickly.
+		 */
+		refaults = lruvec_page_state(target_lruvec,
+				WORKINGSET_ACTIVATE_FILE);
+		if (refaults != target_lruvec->refaults[1] ||
+		    inactive_is_low(target_lruvec, LRU_INACTIVE_FILE))
+			sc->may_deactivate |= DEACTIVATE_FILE;
+		else
+			sc->may_deactivate &= ~DEACTIVATE_FILE;
+	} else
+		sc->may_deactivate = DEACTIVATE_ANON | DEACTIVATE_FILE;
+
+	/*
+	 * If we have plenty of inactive file pages that aren't
+	 * thrashing, try to reclaim those first before touching
+	 * anonymous pages.
+	 */
+	file = lruvec_page_state(target_lruvec, NR_INACTIVE_FILE);
+	if (file >> sc->priority && !(sc->may_deactivate & DEACTIVATE_FILE))
+		sc->cache_trim_mode = 1;
+	else
+		sc->cache_trim_mode = 0;
+
+	/*
+	 * Prevent the reclaimer from falling into the cache trap: as
+	 * cache pages start out inactive, every cache fault will tip
+	 * the scan balance towards the file LRU.  And as the file LRU
+	 * shrinks, so does the window for rotation from references.
+	 * This means we have a runaway feedback loop where a tiny
+	 * thrashing file LRU becomes infinitely more attractive than
+	 * anon pages.  Try to detect this based on file LRU size.
+	 */
+	if (!cgroup_reclaim(sc)) {
+		unsigned long total_high_wmark = 0;
+		unsigned long free, anon;
+		int z;
+
+		free = sum_zone_node_page_state(pgdat->node_id, NR_FREE_PAGES);
+		file = node_page_state(pgdat, NR_ACTIVE_FILE) +
+			   node_page_state(pgdat, NR_INACTIVE_FILE);
+
+		for (z = 0; z < MAX_NR_ZONES; z++) {
+			struct zone *zone = &pgdat->node_zones[z];
+
+			if (!managed_zone(zone))
+				continue;
+
+			total_high_wmark += high_wmark_pages(zone);
+		}
+
+		/*
+		 * Consider anon: if that's low too, this isn't a
+		 * runaway file reclaim problem, but rather just
+		 * extreme pressure. Reclaim as per usual then.
+		 */
+		anon = node_page_state(pgdat, NR_INACTIVE_ANON);
+
+		sc->file_is_tiny =
+			file + free <= total_high_wmark &&
+			!(sc->may_deactivate & DEACTIVATE_ANON) &&
+			anon >> sc->priority;
+	}
+}
+
 /*
  * Determine how aggressively the anon and file LRU lists should be
  * scanned.  The relative value of each set of LRU lists is determined
@@ -2669,7 +2766,6 @@ static void shrink_node(pg_data_t *pgdat, struct scan_control *sc)
 	unsigned long nr_reclaimed, nr_scanned;
 	struct lruvec *target_lruvec;
 	bool reclaimable = false;
-	unsigned long file;
 
 	target_lruvec = mem_cgroup_lruvec(sc->target_mem_cgroup, pgdat);
 
@@ -2679,93 +2775,7 @@ static void shrink_node(pg_data_t *pgdat, struct scan_control *sc)
 	nr_reclaimed = sc->nr_reclaimed;
 	nr_scanned = sc->nr_scanned;
 
-	/*
-	 * Determine the scan balance between anon and file LRUs.
-	 */
-	spin_lock_irq(&target_lruvec->lru_lock);
-	sc->anon_cost = target_lruvec->anon_cost;
-	sc->file_cost = target_lruvec->file_cost;
-	spin_unlock_irq(&target_lruvec->lru_lock);
-
-	/*
-	 * Target desirable inactive:active list ratios for the anon
-	 * and file LRU lists.
-	 */
-	if (!sc->force_deactivate) {
-		unsigned long refaults;
-
-		refaults = lruvec_page_state(target_lruvec,
-				WORKINGSET_ACTIVATE_ANON);
-		if (refaults != target_lruvec->refaults[0] ||
-			inactive_is_low(target_lruvec, LRU_INACTIVE_ANON))
-			sc->may_deactivate |= DEACTIVATE_ANON;
-		else
-			sc->may_deactivate &= ~DEACTIVATE_ANON;
-
-		/*
-		 * When refaults are being observed, it means a new
-		 * workingset is being established. Deactivate to get
-		 * rid of any stale active pages quickly.
-		 */
-		refaults = lruvec_page_state(target_lruvec,
-				WORKINGSET_ACTIVATE_FILE);
-		if (refaults != target_lruvec->refaults[1] ||
-		    inactive_is_low(target_lruvec, LRU_INACTIVE_FILE))
-			sc->may_deactivate |= DEACTIVATE_FILE;
-		else
-			sc->may_deactivate &= ~DEACTIVATE_FILE;
-	} else
-		sc->may_deactivate = DEACTIVATE_ANON | DEACTIVATE_FILE;
-
-	/*
-	 * If we have plenty of inactive file pages that aren't
-	 * thrashing, try to reclaim those first before touching
-	 * anonymous pages.
-	 */
-	file = lruvec_page_state(target_lruvec, NR_INACTIVE_FILE);
-	if (file >> sc->priority && !(sc->may_deactivate & DEACTIVATE_FILE))
-		sc->cache_trim_mode = 1;
-	else
-		sc->cache_trim_mode = 0;
-
-	/*
-	 * Prevent the reclaimer from falling into the cache trap: as
-	 * cache pages start out inactive, every cache fault will tip
-	 * the scan balance towards the file LRU.  And as the file LRU
-	 * shrinks, so does the window for rotation from references.
-	 * This means we have a runaway feedback loop where a tiny
-	 * thrashing file LRU becomes infinitely more attractive than
-	 * anon pages.  Try to detect this based on file LRU size.
-	 */
-	if (!cgroup_reclaim(sc)) {
-		unsigned long total_high_wmark = 0;
-		unsigned long free, anon;
-		int z;
-
-		free = sum_zone_node_page_state(pgdat->node_id, NR_FREE_PAGES);
-		file = node_page_state(pgdat, NR_ACTIVE_FILE) +
-			   node_page_state(pgdat, NR_INACTIVE_FILE);
-
-		for (z = 0; z < MAX_NR_ZONES; z++) {
-			struct zone *zone = &pgdat->node_zones[z];
-			if (!managed_zone(zone))
-				continue;
-
-			total_high_wmark += high_wmark_pages(zone);
-		}
-
-		/*
-		 * Consider anon: if that's low too, this isn't a
-		 * runaway file reclaim problem, but rather just
-		 * extreme pressure. Reclaim as per usual then.
-		 */
-		anon = node_page_state(pgdat, NR_INACTIVE_ANON);
-
-		sc->file_is_tiny =
-			file + free <= total_high_wmark &&
-			!(sc->may_deactivate & DEACTIVATE_ANON) &&
-			anon >> sc->priority;
-	}
+	prepare_scan_count(pgdat, sc);
 
 	shrink_node_memcgs(pgdat, sc);
 
-- 
2.31.0.rc2.261.g7f71774620-goog



  parent reply	other threads:[~2021-03-13  7:58 UTC|newest]

Thread overview: 59+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-13  7:57 [PATCH v1 00/14] Multigenerational LRU Yu Zhao
2021-03-13  7:57 ` [PATCH v1 01/14] include/linux/memcontrol.h: do not warn in page_memcg_rcu() if !CONFIG_MEMCG Yu Zhao
2021-03-13 15:09   ` Matthew Wilcox
2021-03-14  7:45     ` Yu Zhao
2021-03-13  7:57 ` [PATCH v1 02/14] include/linux/nodemask.h: define next_memory_node() if !CONFIG_NUMA Yu Zhao
2021-03-13  7:57 ` [PATCH v1 03/14] include/linux/huge_mm.h: define is_huge_zero_pmd() if !CONFIG_TRANSPARENT_HUGEPAGE Yu Zhao
2021-03-13  7:57 ` [PATCH v1 04/14] include/linux/cgroup.h: export cgroup_mutex Yu Zhao
2021-03-13  7:57 ` [PATCH v1 05/14] mm/swap.c: export activate_page() Yu Zhao
2021-03-13  7:57 ` [PATCH v1 06/14] mm, x86: support the access bit on non-leaf PMD entries Yu Zhao
2021-03-14 22:12   ` Zi Yan
2021-03-14 22:51     ` Matthew Wilcox
2021-03-15  0:03       ` Yu Zhao
2021-03-15  0:27         ` Zi Yan
2021-03-15  1:04           ` Yu Zhao
2021-03-14 23:22   ` Dave Hansen
2021-03-15  3:16     ` Yu Zhao
2021-03-13  7:57 ` [PATCH v1 07/14] mm/pagewalk.c: add pud_entry_post() for post-order traversals Yu Zhao
2021-03-13  7:57 ` Yu Zhao [this message]
2021-03-13  7:57 ` [PATCH v1 09/14] mm: multigenerational lru: mm_struct list Yu Zhao
2021-03-15 19:40   ` Rik van Riel
2021-03-16  2:07     ` Huang, Ying
2021-03-16  3:57       ` Yu Zhao
2021-03-16  6:44         ` Huang, Ying
2021-03-16  7:56           ` Yu Zhao
2021-03-17  3:37             ` Huang, Ying
2021-03-17 10:46               ` Yu Zhao
2021-03-22  3:13                 ` Huang, Ying
2021-03-22  8:08                   ` Yu Zhao
2021-03-24  6:58                     ` Huang, Ying
2021-04-10 18:48                       ` Yu Zhao
2021-04-13  3:06                         ` Huang, Ying
2021-03-13  7:57 ` [PATCH v1 10/14] mm: multigenerational lru: core Yu Zhao
2021-03-15  2:02   ` Andi Kleen
2021-03-15  3:37     ` Yu Zhao
2021-03-13  7:57 ` [PATCH v1 11/14] mm: multigenerational lru: page activation Yu Zhao
2021-03-16 16:34   ` Matthew Wilcox
2021-03-16 21:29     ` Yu Zhao
2021-03-13  7:57 ` [PATCH v1 12/14] mm: multigenerational lru: user space interface Yu Zhao
2021-03-13 12:23   ` kernel test robot
2021-03-13  7:57 ` [PATCH v1 13/14] mm: multigenerational lru: Kconfig Yu Zhao
2021-03-13 12:53   ` kernel test robot
2021-03-13 13:36   ` kernel test robot
2021-03-13  7:57 ` [PATCH v1 14/14] mm: multigenerational lru: documentation Yu Zhao
2021-03-19  9:31   ` Alex Shi
2021-03-22  6:09     ` Yu Zhao
2021-03-14 22:48 ` [PATCH v1 00/14] Multigenerational LRU Zi Yan
2021-03-15  0:52   ` Yu Zhao
2021-03-15  1:13 ` Hillf Danton
2021-03-15  6:49   ` Yu Zhao
2021-03-15 18:00 ` Dave Hansen
2021-03-16  2:24   ` Yu Zhao
2021-03-16 14:50     ` Dave Hansen
2021-03-16 20:30       ` Yu Zhao
2021-03-16 21:14         ` Dave Hansen
2021-04-10  9:21           ` Yu Zhao
2021-04-13  3:02             ` Huang, Ying
2021-04-13 23:00               ` Yu Zhao
2021-03-15 18:38 ` Yang Shi
2021-03-16  3:38   ` Yu Zhao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210313075747.3781593-9-yuzhao@google.com \
    --to=yuzhao@google.com \
    --cc=akpm@linux-foundation.org \
    --cc=alex.shi@linux.alibaba.com \
    --cc=dave.hansen@linux.intel.com \
    --cc=guro@fb.com \
    --cc=hannes@cmpxchg.org \
    --cc=hdanton@sina.com \
    --cc=iamjoonsoo.kim@lge.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mgorman@suse.de \
    --cc=mhocko@suse.com \
    --cc=page-reclaim@google.com \
    --cc=richard.weiyang@linux.alibaba.com \
    --cc=shy828301@gmail.com \
    --cc=vbabka@suse.cz \
    --cc=willy@infradead.org \
    --cc=ying.huang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox